Problem with muve slim 51

i got a muvo slim 52mb. i downloaded mps and wma's from a site called morpheus. well they went into my windows media player as playlists and i dont know how to convert them into files so i can put them onto my muvo slim? can any one help me out here??thanks

Tried the BC update (v2.1). Still exactly the same. No volume keys, no eject key. no brightness keys, no nothing!
Plus Windows says my iSight is unprogrammed and detects IR receiver at every boot, but fails to install drivers for it. Whatta bummer.

Similar Messages

Problem with Muvo Slim

My dad has a new Muvo Slim and I am trying to put music on it for him. I can get it to copy up to 28Mb but not to fill it, is there a setting that I have wrong?
Thanks
Kizzmo

Make sure you have the latest firmware.
Also try the player on another PC to see if the issue is with your PC, or some incompatibility with your PC and the Slim.

Problem with 920 slim cam

Dear Friends There is . Red eye. all of ur pictures will out with red eye. i know know how to remove this problem. if any one knows pleasee sugest

Thanks for your reply .
The first thing i did was disconetct the cam and try different USB ports ( i have 6 oh od them)
Than i downloaded from the creative support center the latest drivers and live command center for windows vista and installed them both
Then look in microsoft page for drivers for web cam (didn't found any)
Then look for virus with Kapersky ( i thought maybe someone hack in to my system and use the cam for spy) sutpid hã?
Then left an E-mail in the support center of creative describing the problem (already got a response and looks pretty much as yours)
This thing is driving me crazy, the dam camera is allways on and freezes and go of when i try to use it.
Can't think of any explanation for that, i've been use it for over 1 year without any problems and than suddenly... this appened
I just can't figured out what changed in my system to cause that
I'm an informatic technitian i deal with harware and software every single for a living that's my job and i can't solve this simple problem, can yoy see my drama?
Best regards
Brix

Problem with Conky + Slim

Hello everyone!
I'm having an issue when running Conky with SLiM. Conky's background should be transparent, but on my desktop, instead of being transparent, shows a part of SLiM's background. I don't know how to fix this, could you help me??
Thanks in advance!

Hi everybody. I came across this post because conky was doing the same thing to me as to OP. I'm running SLiM and Xfce on top of Arch Linux PPC, and conky would show my underlying SLiM background instead of Xfce's when I wanted transparency. I tried all the solutions offered here without success, but fortunately I found another way.
What finally worked was enabling compositing in Xfce's Window Manager Tweaks dialog (Applications Menu --> Settings --> Window Manager Tweaks --> Compositor). I turned it on, fired up conky, and I got a beautiful, see-through conky showing my regular background. Woo!
my .conkyrc:
# fork to background?
background yes
# Use double buffering (reduces flicker, may not work for everyone)
double_buffer yes
update_interval 2.0
# Create own window instead of using desktop (required in nautilus)
own_window yes
own_window_class Conky
own_window_type desktop
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_argb_visual yes
#own_window_argb_value 100
#own_window_colour hotpink
use_xft yes
xftfont Bitstream Vera Sans Mono:size=08
cpu_avg_samples 2
net_avg_samples 2
out_to_console no
# mail spool
mail_spool $MAIL
# Draw borders around text
draw_borders no
# Stippled borders?
stippled_borders 10
# border width
border_width 1
# Default colors and also border colors
default_color white
# Text alignment, other possible values are commented
alignment top_right
# Gap between borders of screen and text
#gap_x 13
gap_y 30
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer none
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
TEXT
$nodename - $sysname $kernel on $machine
$stippled_hr
${color lightgrey}Uptime:$color $uptime ${color lightgrey}- Load:$color $loadavg
${color lightgrey}CPU Usage:${color #5000a0} ${cpu cpu1}% ${cpubar cpu1}
${color black}${cpugraph 000000 5000a0}
${color lightgrey}RAM Usage:$color $mem/$memmax - $memperc% $membar
${color lightgrey}Swap Usage:$color $swap/$swapmax - $swapperc% ${swapbar}
${color lightgrey}Processes:$color $processes ${color grey}Running:$color $running_processes
$color$stippled_hr
${color lightgrey}Networking:
Down:${color #8844ee} ${downspeed wlan0} ${color lightgrey} ${offset 70}Up:${color #22ccff} ${upspeed wlan0}
${color black}${downspeedgraph wlan0 32,150 ff0000 0000ff} $alignr${color black}${upspeedgraph wlan0 32,150 0000ff ff0000}
$color$stippled_hr
${color lightgrey}File systems:
/ $color${fs_used /}/${fs_size /} ${fs_bar /}
$color$stippled_hr
${color}Proc usage: PID CPU% MEM%
${color #ddaa00} ${top name 1} ${top pid 1} ${top cpu 1} ${top mem 1}
${color lightgrey} ${top name 2} ${top pid 2} ${top cpu 2} ${top mem 2}
${color lightgrey} ${top name 3} ${top pid 3} ${top cpu 3} ${top mem 3}
${color lightgrey} ${top name 4} ${top pid 4} ${top cpu 4} ${top mem 4}
${color lightgrey} ${top name 5} ${top pid 5} ${top cpu 5} ${top mem 5}
${color}Mem usage:
${color #ddaa00} ${top_mem name 1} ${top_mem pid 1} ${top_mem cpu 1} ${top_mem mem 1}
${color lightgrey} ${top_mem name 2} ${top_mem pid 2} ${top_mem cpu 2} ${top_mem mem 2}
${color lightgrey} ${top_mem name 3} ${top_mem pid 3} ${top_mem cpu 3} ${top_mem mem 3}
${color lightgrey} ${top_mem name 4} ${top_mem pid 4} ${top_mem cpu 4} ${top_mem mem 4}
${color lightgrey} ${top_mem name 5} ${top_mem pid 5} ${top_mem cpu 5} ${top_mem mem 5}
I'd like to note that I needed own_window_type to be desktop. Setting to override shows the SLiM background again. Or maybe just a black background, I don't know. Anyway, choose desktop.
Just thought I'd share what worked for me, after hours of frustration.
Last edited by eap (2012-02-28 23:06:18)

I have got problem with my pc-cam 950 slim

I have got problem with my pc-cam 950 slim. When I press the power button, the busy light goes on for seconds then it is shut down again so the camera doesn't work. Please help me with this problem. I tried to connect it to my PC put it didn't work either.
Thank you for taking the time to help me.

Originally Posted by Colin-CL
Hi,
Have you checked that you have put in brand new 2 x AAA batteries?
Connecting it to your PC will allow you to use it as a mass storage device after installing the relevant operating system (Microsoft
hi,
Yes, I put two new batteries
When connected to the computer nothing happens
What can be done to reset it?
By replaced capacitor problem can be solved?

[SOLVED] systemd switch, problems with slim/bootup

My system will boot, giving me "OK" for everything it's doing. Then my system gives me a tty login prompt, but continues booting:
gestalt login: [ OK ] Starting Wicd.
[ OK ] Reached target multi-user.
[ OK ] Reached target graphical interface.
So if i just hit enter, it gives me another login prompt, then I can login, but X/fluxbox isn't started or anything.
My ~/.xinitrc:
exec startfluxbox
xset +fp /usr/share/fonts/local
xset fp rehash
systemctl list-units --type=target
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target masked active active graphical.target
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
network.target loaded active active Network
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded active active Syslog
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
14 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Graphical target isn't masked, like I thought it would be after reading this
systemctl status slim.service gives me:
slim.service - SLiM Simple Login Manager
Loaded: loaded (/usr/lib/systemd/system/slim.service; enabled)
Active: failed (Result: exit-code) since Mon, 2012-11-26
Process: 305 ExecStart=urs/bin/slim -nodaemon(code=exited, status =1/FAILURE)
CGroup: name=systemd:/system/slim.service
systemd-analyze blame gives (just going to ignore the times)
wicd.service
systemd-vconsole-setup.service
systemd-binfmt.service
systemd-logind.service
systemd-modules-load.service
dev-hugepages.mount
systemd-udev-trigger.service
dev-mqueue.mount
systemd-udevd.service
proc-sys-fs-binfmt_service.mount
console-kit-daemon.service
polkit.service
systemd-tmpfiles-setup.service
home.mount
systemd-sysctl.service
tmp.mount
systemd-user-sesssions.service
systemd-remount-fs.service
slim isn't even on this list.
systemctl --failed
UNIT LOAD ACTIVE SUB JOB DESCRIPTION
slim.service loaded failed failed SLiM Simple Login Manager
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
JOB = Pending job for the unit.
4 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
Hopefully this isn't too much information (or completely irrelevant) for what might be a far simpler problem, but I'm just not sure what's going on. It might be worth noting that I only bothered to start switching to systemd today when I had to reboot and slim wouldn't start/get me into my WM(!) This is interesting to me, since I read (somewhere) that as of slim's last version, it would only work with systemd and not consolekit... but when I try:
pacman -Qi slim
It tells me that the last time I last updated/installed slim was November 5 of this year. Any ideas?
EDIT:
Latest nVidia drivers weren't working with my 7xxx integrated GPU. Downgrade to 304xx drivers or use nouveau.
Last edited by brokengestalt (2012-11-28 17:41:50)

I tried starting X manually (typing in "startx" at the prompt, and I get the following errors:
modprobe: ERROR: could not insert 'nvidia': No such device
Fatal server error:
no screens found
(EE)
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
It looks like I'm just having problems with my video card, but I have the proprietary nVidia drivers installed and X installed. The systemd wiki page mentions no changes that I would need to make to my xorg or nvidia configuration...

SLiM : problem with accents

I have recently changed my password, and the new one contains accents. The problem is : when I enter an accentuated character in either the login or password field of SLiM, it does nothing but making the font bold.
I got rid of this problem by making SLiM connect automatically, but I wonder how to actually fix this.
Thank you for answering !

Hi,
Once we had a similar problem in Arabic and this is the response we've got from Oracle support. It resolved our issue and I'm sure it can do the trick for you if you set it for your own choice of language.
NEXT STEPS:
Q1 What is ESSLANG on the Essbase server set to?
Q2 What is ESSLANG in the \hyperion\products\biplus\lib\fr.env file on the FR server set to?
It maybe that you have experienced BUG 8392323
If the ESSLANG on the Essbase and FR server(s) is set properly this shouldn’t be an issue, but it looks like you might be running into this bug.
In order for essbase/FR to handle dimension-names, member-names, etc which
contain special characters, the ESSLANG environment variable on the essbase
server machine needs to be set properly:
e.g.
ESSLANG= Arabic - Saudi Arabia (ISO)@Binary
Also a solution to this problem would be to use the Essbase APS ADM driver rather then the Essbase Native ADM driver. The APS driver can be used by setting the UseEssbaseEDS=1 in fr_global.properties:
UseEssbaseEDS=1
You also need to set the ESSLANG environment variable in the fr.env file rather then or in addition to the computers environment variables. To do this edit \hyperion\products\biplus\lib\fr.env and change the ESSLANG to:
ESSLANG=S Arabic - Saudi Arabia (ISO)@Binary
Once these changes have been made restart the services.
Cheers,
Alp

Lots of problems with program

Guys,
I really am having a lot of problems with a program. I got the program to compile but it looks absolutely nothing like it is supposed to look. I have a deadline for tomorrow and sent my teacher an email but the chances of him getting back to me by tomorrow night for a weekend is pretty much slim to none. Anyways I am sending my output and if anyone could give me advice or feedback on why it does not look right if it is something small and if its alot of things go ahead and call me dumb.
here is my code:
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
public class Checkerboard extends Frame implements ActionListener
     private Panel topPanel;
     private TextArea topDisplay[];
     private Panel bottomPanel;
     private TextField startField = new TextField(10);
     private TextField stopField = new TextField(10);
     private TextField stepField = new TextField(10);
     private Label startLabel = new Label ("Start");
     private Label stopLabel = new Label ("Stop");
     private Label stepLabel = new Label ("Step");
     private Button goButton;
     private Button clearButton;
     private boolean clearText;
     private boolean first;
     private int start;
     private int stop;
     private int step;
     //constructor methods
     public Checkerboard()
          //construct components and initialize beginning values
          topPanel = new Panel();
          topDisplay = new TextArea[16];
          goButton = new Button("Go");
          clearButton = new Button("Clear");
          first = true;
          bottomPanel = new Panel();
          int start = 0;
          int stop = 0;
          int step = 0;
          bottomPanel.add(startField);
          bottomPanel.add(stopField);
          bottomPanel.add(stepField);
          bottomPanel.add(startLabel);
          bottomPanel.add(stopLabel);
          bottomPanel.add(stepLabel);
          bottomPanel.add(goButton);
          goButton.addActionListener(this);
          bottomPanel.add(clearButton);
          clearButton.addActionListener(this);
          clearText = true;
          //set layouts for the Frame and Panels
          setLayout(new BorderLayout());
          topPanel.setLayout(new GridLayout(4, 4, 10, 10));
          bottomPanel.setLayout(new GridLayout(3, 3, 5, 5));
          //construct the Display
          for(int i = 1; i <= 15; i++)
                    topDisplay[i] = new TextArea(null, 3, 5, 3);
          //set color to the panel
          //row 1
          for(int x = 1; x <= 4; x++)
          //set color for
          setBackground(Color.white);
          //row 2
          for(int x = 5; x <= 8; x++)
          //set color for
          setBackground(Color.white);
          //row 3
          for(int x = 9; x <= 12; x++)
          //set color for
          setBackground(Color.white);
          //row 4
          for(int x = 13; x <= 16; x++)
          //set color for
          setBackground(Color.white);
          //add components to frame
          add(topPanel, BorderLayout.NORTH);
          add(bottomPanel, BorderLayout.CENTER);
          //allow the x to close the application
          addWindowListener(new WindowAdapter()
                    public void windowclosing(WindowEvent e)
                              System.exit(0);
               } //end window adapter
     public static void main(String args[])
          Checkerboard f = new Checkerboard();
          f.setTitle("Checkerboard Array");
          f.setBounds(50, 100, 300, 400);
          f.setLocationRelativeTo(null);
          f.setVisible(true);
     } //end main
     public void actionPerformed(ActionEvent e)
          //convert data in TextField to int
          int start = Integer.parseInt(startField.getText());
          int stop = Integer.parseInt(stopField.getText());
          int step = Integer.parseInt(stepField.getText());
          for(int i = 1; i <=16; i++)
          setBackground(Color.blue);
          for(int i = start; i <= stop; i++)
          setBackground(Color.yellow);
          //test clear
          String arg = e.getActionCommand();
          //clear button was clicked
          if(arg.equals("Clear"))
               clearText = true;
               start = 0;
               stop = 0;
               step = 0;
               first = true;
               setBackground(Color.white);
               startField.requestFocus();
          } //end the if clear
     }//end action listener
}//end classThis will incorporate arrays, for loops, and Frames all in one.
Create a panel containing an array of 16 TextArea components that change color to correspond with the start, stop, and step values entered by the user. Perform the following tasks to create the Checkerboard Array application shown below. When the user enters the start, stop, and step fields and then clicks the Go button, the results are also shown below.
1.     Call your application Checkerboard.java
2.     You will need the following variables� declare them as private:
a.     16 component TextArea array
b.     a Panel to hold the array
c.     3 TextField components with length of 10
d.     3 int variables to receive the start, stop, and step values
e.     3 Labels to display the words Start, Stop, and Step
f.     a Go button
g.     a Clear button
h.     a Panel to hold the 3 TextFields, 3 Labels, and the 2 Buttons
3.     Create a constructor method to:
a.     construct each of the components declared above and initializes the start, stop, and step variables to zero (when constructing the TextArea components, use the following parameters: null, 3, 5, 3)
b.     set the Frame layout to BorderLayout
c.     write a for loop to loop the array and set each of the 16 TextArea components in that array so they cannot be edited. In the same loop, set each of the TextArea components text to be 1 more than the index number. Also in this same loop, set the background of each of the TextArea components to white.
d.     set the Panel for the TextArea components to GridLayout with 4 rows, 4 columns, and both gaps set to 10
e.     set the Panel for the TextFields, Labels, and button to GridLayout with 3 rows, 3 columns, and both gaps set to 5
f.     add the components to their respective Panels
g.     make the buttons clickable
h.     place the Panels in the Frame� put one in the NORTH and one in the CENTER
i.     Enter the addWindowListener() method described in the chapter� this is the method that overrides the click of the X so it terminates the application
4.     In your actionPerformed() method:
a.     convert the data in your TextFields to int and store them in the variables declared above
b.     write a loop that goes through the array setting every background color to blue
c.     write another loop that�s based on the user inputs. Each time the loop is executed, change the background color to yellow (so� start your loop at the user�s specified starting condition. You�ll stop at the user�s specified stopping value. You�ll change the fields to yellow every time you increment your loop based on the step value. REMEMBER: Your displayed values are 1 off from your index numbers!!)
5.     Write a main() method that creates an instance of the Checkerboard Frame.
a.     set the bounds for the frame to 50, 100, 300, 400
b.     set the title bar caption to Checkerboard Array
c.     use the setVisible() method to display the application Frame during execution
6.     After you get all of this complete, include error handling to make sure:
a.     the values entered in the TextFields are valid integers
b.     the start value is greater than or equal to 1 and less than or equal to 16
c.     the stop value is greater than or equal to 1 and less than or equal to 16
d.     the step value is greater than or equal to 1 and less than or equal to 16
e.     the start condition is less than the stop condition
f.     when an error occurs, give an error message in a dialog box that is specific to their error, remove the text from the invalid field, and put the cursor in that field so the user has a chance to re-enter� this can be accomplished by using multiple try/catch statements
g.     only change the colors if the numbers are valid
7.     Create a clear button as seen in the example below. This button should:
a.     clear out all 3 TextFields
b.     change the background color of all TextArea array elements to white
c.     put the cursor in the start field
8.     Document!!
I know you guys are probably busy with your own stuff but any help and I would certainly appreciate it

got the yellow boxes to come up but just one box.....so is there something wrong with my yellow set background because I am not seeing any more errors
//packages to import
import javax.swing.JOptionPane;
import java.awt.*;
import java.awt.event.*;
public class Checkerboard extends Frame implements ActionListener
     private Panel topPanel;
     private TextArea topDisplay[];
     private Panel bottomPanel;
     private TextField startField = new TextField(10);
     private TextField stopField = new TextField(10);
     private TextField stepField = new TextField(10);
     private Label startLabel = new Label ("Start");
     private Label stopLabel = new Label ("Stop");
     private Label stepLabel = new Label ("Step");
     private Button goButton;
     private Button clearButton;
     private boolean clearText;
     private boolean first;
     private int start;
     private int stop;
     private int step;
     //constructor methods
     public Checkerboard()
          //construct components and initialize beginning values
          topPanel = new Panel();
          topDisplay = new TextArea[16];
          goButton = new Button("Go");
          clearButton = new Button("Clear");
          first = true;
          bottomPanel = new Panel();
          int start = 0;
          int stop = 0;
          int step = 0;
          bottomPanel.add(startField);
          bottomPanel.add(stopField);
          bottomPanel.add(stepField);
          bottomPanel.add(startLabel);
          bottomPanel.add(stopLabel);
          bottomPanel.add(stepLabel);
          bottomPanel.add(goButton);
          goButton.addActionListener(this);
          bottomPanel.add(clearButton);
          clearButton.addActionListener(this);
          clearText = true;
          //set layouts for the Frame and Panels
          setLayout(new BorderLayout());
          topPanel.setLayout(new GridLayout(4, 4, 10, 10));
          bottomPanel.setLayout(new GridLayout(3, 3, 5, 5));
          //construct the Display
          for(int i = 0; i <= 15; i++)
                    topDisplay[i] = new TextArea(null, 3, 5, 3);
                    topDisplay.setText(String.valueOf(i+1));
                    topDisplay[i].setEditable(false);
                    topPanel.add(topDisplay[i]);
          //add components to frame
          add(topPanel, BorderLayout.NORTH);
          add(bottomPanel, BorderLayout.CENTER);
          //allow the x to close the application
          addWindowListener(new WindowAdapter()
                    public void windowClosing(WindowEvent e)
                              System.exit(0);
               } //end window adapter
          public static void main(String args[])
                    Checkerboard f = new Checkerboard();
                    f.setTitle("Checkerboard Array");
                    f.setBounds(50, 100, 300, 400);
                    f.setLocationRelativeTo(null);
                    f.setVisible(true);
               } //end main
               public void actionPerformed(ActionEvent e)
                    boolean done = false;
                    //test go
                    String arg = e.getActionCommand();
                    //go button was clicked
                    if(arg.equals("Go"))
               //convert data in TextField to int
               int start = Integer.parseInt(startField.getText());
               int stop = Integer.parseInt(stopField.getText());
               int step = Integer.parseInt(stepField.getText());
               while(!done)
                    try
                         if((start <= 1) && (start > 16)) throw new NumberFormatException();
                         else done = true;
                    } //end try
                    catch (NumberFormatException f)
                         JOptionPane.showMessageDialog(null, "You must enter start between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
                         startField.setText(" ");
                         startField.requestFocus();
                    } //end catch
                    try
                         if ((stop < 1) && (stop > 16)) throw new NumberFormatException();
                         else done = true;
                    } //end try
                    catch (NumberFormatException f)
                         JOptionPane.showMessageDialog(null, "You must enter stop between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
                         stopField.setText(" ");
                         stopField.requestFocus();
                    } //end catch
                    try
                         if ((step < 1) && (step > 16)) throw new NumberFormatException();
                         else done = true;
                    } //end try
                    catch (NumberFormatException f)
                         JOptionPane.showMessageDialog(null, "You must enter step between 1 and 16", "Error", JOptionPane.ERROR_MESSAGE);
                         stepField.setText(" ");
                         stepField.requestFocus();
                    } //end catch
                    try
                         if (start > stop) throw new NumberFormatException();
                         else done = true;
                    } //end try
                    catch (NumberFormatException f)
                         JOptionPane.showMessageDialog(null, "Stop cannot be larger than start", "Error", JOptionPane.ERROR_MESSAGE);
                         startField.setText(" ");
                         stopField.setText(" ");
                         stepField.setText(" ");
                         startField.requestFocus();
                    } //end catch
          } //end while
                    for(int i = 0; i <=15; i++)
                    topDisplay[i].setBackground(Color.blue);
                    for(int i = start; i <= stop; step++)
                    topDisplay[i].setBackground(Color.yellow);
               } //end the if go
               //clear button was clicked
               if(arg.equals("Clear"))
                    clearText = true;
                    startField.setText("");
                    stopField.setText("");
                    stepField.setText("");
                    first = true;
                    setBackground(Color.white);
                    startField.requestFocus();
               } //end the if clear
     }//end action listener
}//end class

Mouse problems with Illustrator CS6 and Mountain Lion

The mouse in Illustrator selects and deselects as it moves over buttons and cells:
1. In Graph data the cells the mouse passes over go dark grey if not already selected, then deselect if they are selected. This makes it very difficult to use the data cells.
2. In Layers window, where I may have 100s of layers, I want to hide one layer or more which are not necessarily adjacent to each other. Illustrator hides all of the layers it passes. It is very difficult to click and unclick the show/hide button (and also the lock button). Ditto with show or unlock toggle layer. I had to start up in Lion in which Illustrator does not have this problem in order to get a job finished in time.
Seems there needs to be a fix for Illustrator to work properly in Mountain Lion.
Has anyone found such a fix?

No I don't have Right-Zoom (don't know what it is), but I have the same problem with Apple's Track Pad, which I don't use much and I only use the inbuilt software.
I use Kensington Slim Blade and before that LogiTech's marble mouse and both need their software to work properly.
All of them work fine in Lion and earlier. Could it be that Adobe has overlooked some new aspect that’s in Mountain Lion which, in my case, needs to be fixed for Illustrator?

I have tow problem withe my muvo s

i bought month ago a muvo slim 52mb.
in the start everything was alright but now i have 2 problems:
) i cant open the mp3, when i am pushing the on/off, the muvo doesnt opend. but if it is already on i can switch it off, and when i connect the machine to my pc/leptop and disconnect it, it will be opended. may-be it's problem with my battry?
2)i cant charge it/
when i connect the muvo to my pc/leptot it should show me the "power" icon, but it's shows me "spaceship" icon, despite the fact that the muvo shows me the power of the battery is /3.
please help.

ira: I can't help directly, it sounds like you need to contact Creative Support.

2 problems with my TECRA M2

I have a Tecra M2
I have 2 problems with the notebook.
1 - when I put a second disk (slim) the pc don't choice the first to open. I must put the key F1 for open windows xp.
2 - Other problem that the key (2@) don't make nothing
when I put on them.
Do you know that problem and the method to solution.
Thank you.
andr

Hi dufrane
As far as I know you can use second HDD without any problems. If you want you can install another OS there and start it when ever you want.
If you want to boot-up from second HDD check settings in BIOS. There you can set boot-up priority. I am not sure but there must be option that allows you to use second HDD.
It is not easy to say anything about your problem with keyboard. Contact Service Partner. They can check functionality of the keyboard.
Good luck

'There is a problem with this Windows installer package'

iTunes won't install. I keep getting the following message midway through installation;
'There is a problem with this Windows installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor.'
It all happened a while ago when iTunes tried to update, it crashed straight after initiating the download so I closed it down. Upon opening iTunes again it would just keep crashing so I decided to uninstall iTunes altogether and reinstall the latest version.
Now I'm met with this message every time I try and install the **** thing, I followed the series of troubleshooting like uninstalling all the iTunes files and quicktime ones then trying to reinstall, I tried clearing my AppData Temp folder then reset and tried again and got the same error, then I tried running the windows clean up utility (Which when I ran I found iTunes wasn't present).
I'm completely at a loss can ANYONE please help me? I assume theres a corrupted file somewhere from the original crash but the case is where and what can I do to fix it?
Any help would be greatly appreciated,
Thanks.

If all the basics have failed try deep cleaning the registry and by that I mean
using regedit to "find" every iTunes ,quicktime etc key and reference and delete them this will then give you a machine that has never seen iTunes.
Why do this because iTunes and the other attendant programs leave legion of entries that are not removed by any cleaner I have found .The repeated updating and or installing of iTunes creates this detritus that has confused an installation usually the point at which you post here.This is nothing new in Windows other software vendors have realised this problem and for instance Norton
have a tool that removes all evidence of their AV installation in fact you run it twice to be 100% when having problems with an installation.Until Apple produce a similar tool this is the only way I have come across to solve the multiple
problems users find However to be fair millions of users update itunes every week and have no problems so the chances of it being Apple's fault are very very slim it is unfortunately likely to be an unfortunate combination of issues as mentioned above
BUT if you do not understand regedit do not attempt it get someone who does to help

Problems with V5.0

1. My Kensington Slim Blade Mouse scroll ball works fine with Internet Explorer 8, but not at all, or partially, with Firefox V5.0. I don't want to update Firefox because your later versions don't work with my ZoneAlarm Forcefield browser security.
2. Your cor-el's response to my question posted at the link below was not an answer. I found a download for V5.0 at another site, but then as now I can't download anything with Firefox but have to use Internet Explorer to do that as well!!
I was unable to make your "Submit Feedback" button work here (http://input.mozilla.com/en-US/feedback#sad) or in your suggestion box link below on that web page. When pasting the URL for this page, 'Firefox Made Me Sad,' into Internet Explorer, I got the message "Oh! So, you want to offer us feedback on Firefox. Thank you, but you'll need to be on the latest version. To do that, simply go to our download page and install/update to the latest version of Firefox!" Why didn't I get that message here in Firefox V5.0 if you weren't going to allow me to submit a problem report? I think that your attitude towards users with a problem with your product - STINKS!!
Can You help me here, or do I need to DITCH FIREFOX ALLTOGETHER??
https://support.mozilla.com/en-US/questions/862968#answer-232481

Look here:
https://support.mozilla.com/en-US/kb/Unable%20to%20download%20or%20save%20files
and here for 5 version:
All languages:
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/5.0/win32/
BUT keep in mind that the '''older versions aren't supported any longer''' and are missing hundreds of security patches that are in the latest versions of Firefox.
[the cor-el link (http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-5.0/) for some reason don't work any more]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

QUADRO CX & Open-GL problem with After Effects

Hi,
Im using Adobe After Effects CS4 on my 8-core intel machine with a brand new QUADRO CX graphic card i just bought.
With After Effects I noticed that when I apply the Turbulent Noise OR Fractil Noise and turn on OPEN-GL it shows a different pattern than when I turn off OPEN-GL in AE.
I think this is a problem with OPEN-GL. Does someone have the same problem? What do I need to do? I mean I bought this card for a high price and it shows me this strange problem..
Thanks!
Faysal

Most likely it's a bug that somehow skews the random seed. Beyond that - no idea. I'm still saving money for a new computer and a CX simply isn't in the budget, so chances are slim that I will ever be useful in these matters. ;-) Just make sure to file it on the official bug report form: http://www.adobe.com/go/wish. Otherwise, as a joint venture product, the CX certainly comes with some kind of extended support on Adobe's end, so a call to support might provide some help (after the 5th of January).
Mylenium

A problem with threads

I am trying to implement some kind of a server listening for requests. The listener part of the app, is a daemon thread that listens for connections and instantiates a handling daemon thread once it gets some. However, my problem is that i must be able to kill the listening thread at the user's will (say via a sto button). I have done this via the Sun's proposed way, by testing a boolean flag in the loop, which is set to false when i wish to kill the thread. The problem with this thing is the following...
Once the thread starts excecuting, it will test the flag, find it true and enter the loop. At some point it will LOCK on the server socket waiting for connection. Unless some client actually connects, it will keep on listening indefinatelly whithought ever bothering to check for the flag again (no matter how many times you set the damn thing to false).
My question is this: Is there any real, non-theoretical, applied way to stop thread in java safely?
Thank you in advance,
Lefty

This was one solution from the socket programming forum, have you tried this??
public Thread MyThread extends Thread{
     boolean active = true;
     public void run(){
          ss.setSoTimeout(90);
          while (active){
               try{
                    serverSocket = ss.accept();
               catch (SocketTimeoutException ste){
               // do nothing
     // interrupt thread
     public void deactivate(){
          active = false;
          // you gotta sleep for a time longer than the
          // accept() timeout to make sure that timeout is finished.
          try{
               sleep(91);
          }catch (InterruptedException ie){
          interrupt();
}

Problem with muve slim 51

Similar Messages

Maybe you are looking for