Problem with My photo stream need help.

Hi.I just use my photo stream with icloud control panel.First it's work,my pictures upload automatically to my pc but now when I take new photos,they are not sent.
It was happened after I had deleted all my photo stream but my setting still same. I don't know the reason and need help.Thank regards.

In my iPhone,at first my photo stream still uploaded but now when I took a photos,it didn't upload to my photo stream.

Similar Messages

HT4906 Problems with icloud photo stream please help

Hi I have just updated my imac to mountain lion, trying to use icloud to photo stream but it won't let me. I have checked for software updates and all upto date - any ideas?

see http://support.apple.com/kb/HT4436 for more information
LN

Problem with iCloud Photo Streaming to 3 OS6 devices?

I have 3 OS6 devices with 3 different iCloud accounts, 2 iPhones and an iPod touch. Photo Stream will work between iPhone 1 and ipod touch and vise versa, but neither will connect by invite to the 2nd iPhone. The 2nd iPhone won't connect either to the other 2 devices?
All settings are the same, The only possibilty I can think of is that the 2nd iPhone's iCloud account has become corrupted? Any suggestions?

Hi Diiaablus95,
I apologize, I'm a but unclear on the exact nature of the issue you are describing. If you are having issues with My Photo Stream on your iPhone after a recent upgrade to iOS 8, you may find the troubleshooting steps outlined in the following article helpful:
Get help using My Photo Stream - Apple Support
Regards,
- Brenden

Sync-problem with 'my photo stream' between iPhone (IOS) and PC (Win7)

Hi all,
I have a problem with the automatic sync of "my photo stream".
My photo steam on my IOS device contains 52 photos.
On my Windows computer there are only 43 photos available.
There is no logic behind the missing photos.
I took 2 more photos to test the stream. After I took the photos I've 54 photos in my album. 2 min later the upload seems to be completed because on my IOS device I've 54 photos.
I've waited for over 2 hours now and on my Windows computer there are still 43 photos. So the new ones are missing beside some missing photos in between!
What I've already done:
# re-install iCould on Windows computer
# reset iPhone to factory defaults
# several shutdown and reboots of all devices
maybe someone can help me with that problem!
thanks in advance!
cheers
max

I tried the sign-out/reboot/sign-in and now it's stranger than before.
On my iPhone I have 79 pictures in 'my photo stream'.
On my PC I have 24 randomly picked photos in 'my photo stream'.
IMG_0001.JPG, IMG_0002.JPG, IMG_0003.JPG, IMG_0004.JPG, IMG_0005.JPG, IMG_0006.JPG, IMG_0007.JPG, IMG_0008.JPG, IMG_0009.JPG, IMG_0010.JPG, IMG_0011.JPG, IMG_0012.JPG, IMG_0013.JPG, IMG_0014.JPG, IMG_0015.JPG, IMG_0017.JPG, IMG_0022.JPG, IMG_0023.JPG, IMG_0028.JPG, IMG_0029.JPG, IMG_0030.JPG, IMG_0035.JPG, IMG_0041.JPG, IMG_0049.JPG
Something very strange is happening here...

Problems with Share Photo Stream on Ipad

Hello, I just upgrade my Iphone(4)and my Ipad (2) to IOS6. I shared Phot Stream with my Iphone and no problem but whrn i tried to do with Ipad, I discover than <Settings<Photo & Camera I have no the option: Share Photo Stream ON-OFF. So I can't no share Photo Stream with my Ipad. Anyone can help me?

Thanks buddy, that isn't it for sure, I have checked the most basic things several times
Tim

Problem with a Form field, need help

I work for a small police agency and I am our IT guy. Most of my IT tasks have many been hardware and system software and networking. I have been trying to learn and teach myself programming. I also create forms for agency use. I have been working on a form and want to add increased functionality to allow our officers to issue a citation with the least amount of time spend on the form. One main issue is that we have to have a unique citation number. We have come up with a format that will specify as such: YYYY(Officer's 4 Digit ID Number)-(Auto Incrementing number). So, for instance, if this is my 55th citation issued and my ID number is 0100 the citation number would appear like this: 20120100-0055. The ID number will be entered by the officer earlier in the form. The problem I can't seem to vision around is how I will keep the number to increase by one and have it maintain that way. I want it to be form specific, because each officer has their own vehicle and MDT that the PDF will reside on at this time.
So far, what I have toyed with in the past 30 minutes is this:
var Ticker = 0001;
var Year = getFullYear();
var x = getField('OfcIDNo').value;
Eventually the form will be autocreated by a program that will be run from a centralized server. I have even thought about running the from from a server and taking all the data and INSERTing it into a SQL Server 2008 Express DB table on a server, but I'd still have to have the citation number created at the form as the officer fills in the data. The last four of the number doesn't have to reset when the year changes, but it would be a plus. Any information anyone can help with I would appreciate it.
Thanks in advance

Seems like it was too easy, is it safe to assume that javascript and javascript functioning in Adobe PDF is a bit different learning curve? That does help, the only thing that I'm missing is the Auto Incrementing 4 digit number. I was toying with assigning a variable in the globals that would auto increment but having problems with how I would execute it. Each copy of the form would be installed on each officers MDT so the number would be specific to that officer. The format will be YYYY"OFCIDNo"-####. I would like to assign the number to the global variable on the execution of the Print Dialog. This way the officer an clear the form if he/she needs to start over and then it stays whether or not they close the file and reopen it.
That syntax has been very helpful to get started.
Thank you,
David

Problem with Quicktime...need help...

I used to visit "VirusRadio.com" frequently and listen to old Opie and Anthony shows online, and never had a problem. Here lately (after installing XP Pro, I've noticed) I've been totally unable to stream content off this website. When I had Home Edition, I just downloaded quicktime and this site loaded perfectly, yet this isn't so on XP Pro. Maybe some of my firewall/Internet settings aren't correct, or maybe it's a quicktime issue...but I need help. I'm losing my mind trying to figure this out. Any help would be much appreciated. Thanks!

These software conflicts could be due to some inconsistency the Leopard upgrade caused in the System folder. Doing a clean "Archive & Install" of Leopard will probably fix your problems.

HT4858 Is anyone else having problems with shared photo stream URLs not updating after photos are added or deleted from a shared photo stream?

I have made quite a few shared photo streams and love the idea of sharing easily with a variety of friends and family. The problem in having is that any modifications made to the shared photostream (adding/deleting pictures) are not updated in the URL I have sent to my family and friends. Is anyone else experiencing this? Does anyone have any ideas or solutions?

Disable Photo Stream in the System/iCloud preference pane
and in iPhoto's Photo Share preference pane.
Reboot and reenable both respectively. That should jump start Photo Stream on your Mac.
Happy Holidays

Problem with my WLAN(N93)- need help.

Hello guys,
just recently with WLAN got problem. each time i want to start web browsing this message pop-up.. 'web:already in use'. actually what is the problem?

In my iPhone,at first my photo stream still uploaded but now when I took a photos,it didn't upload to my photo stream.

Problem with Logic/external HardDisk - NEED HELP!

Hi Everybody
I've got a big problem with my Logic Projects. I am recording Songs with my band and it's all 24bit, 96 KHz. With more than about 20 Tracks playing simultaneously, Logic shows an error that the disk is too slow.
For all the Audio stuff, I am using an external LaCie HardDisk, 250GB, FW800. Buffers are on the highest setting in Logic, and the "Larger Disk Buffer" Option is turned on.
In the Terminal, I watched the Disk usage by typing "top -d", and with 20 Tracks playing, it shows a Disk read of about 6000KB/s. This is well within the FW800 Standard! When I copy a file from that HardDisk to another one, Terminal shows a disk read of about 25'000KB/s, so nothing seems to be wrong with the disk itself. I guess it must be a Logic problem.
Can anybody help me or does anyone have the same problem? Any help is greatly appreciated... Thanks!
(I am using Logic Pro 7.1.1)
Message was edited by: bollo.sh

Hello,
This is something I have experience with. If you want to you can go here to see my full set-up.
www.KenosisStudios.com
I am in a pro scenerio where I often need and use 50-60 tracks simult. at 24/96khz. I used to use a Glyph rack with 7200rpm drives and when I started out I spent unreal time on the phone with Emagic, Apple, Sweetwater, and Glyph tech support to try every option of getting ProTools HD results out of my track count. I am no tech guru, so don't live by my words alone, but my personal experience states the following;
I tried raiding the drives, splitting tracks to seperate drives for playback, you name it. The bottom line is this, your problem is not, as you know, with the bandwidth of your bus. It is the speed of your drives. Were you to have 10krpm or 15krpm drives you would immediately see a difference. Yes bandwidth and all sorts of techy stuff comes into play, but by and large this is what you need to address.
What I ended up doing was this- I started using the outboard drive for back-ups and other outboard drives for my sample libraries. I installed in the G5 second drive slot a 7200rpm Seagate Sata drive and strictly track just to it.
Doing this alone got my track count to the 50-60track, 24/96khz scenerio I use today.
My advise, depending on how big you need the drive to be, do the research on what 10krpm and 15krpm internal Sata drives are dependable and go with that. Of course the faster the rpm the smaller the drive, so just look at a good balance for your situation. If you must go external, again, the faster the better, and going Sata will do you better than FW, etc.
I hope this is of use to you.

Problem with changing flash content - Need help

I need help in changing the flash content. Here is my proble,
1) I bought a flash template (I will call this Original) from a website and paid some money to customize my menu,logo and background color.
2) After they finished it they sent me several files. Like 1) index.html, .swf, psd, .fla. In all the files .html,.swf (the video) and .psd I am seeing my customize changes (logo,menu and background color). But the .fla file they sent me is still shows everything from original template. It doesn't have my logo, menu or background color.
3) I asked their technical support and they walk me through. a) Open the .fla file in flash pro. b) Change the content c) Hit Ctrl+Enter and it will export the new .swf file to the flash folder. d) Make sure I delete the video from flash folder and replace the name with the one I created.
I did all these steps. But the problem is the .SWF that i generated is showing everything from the orignal template. It did change the content but I don't see any of my customize request. (Menu, logo or color)
4) Then I open the index.html and I DID NOT see any of the changes in the content.
My feeling is they did not provide me the correct .FLA file. I really need your help.
My confusion is a) Have they provide me the correct .FLA file or I am doing something wrong. b) When I generated the new .swf video and renamed it properly why it didn't reflect in the index.html file.
I am really going back and forth with them since last 15 days and its not going anywhere. I really appreciate any help.
Thanks,
Jessy

Unfortunately, if you have not enough knowledge about using Flash, and do not want to pay to have this done for you, the folks who did this for you are likely going to be the only ones who can help you resolve it. They should be able to provide the edited fla and the new swf if they are in any way a credible/reliable business.... which at this point sounds like they are not.

Same problem with payment but still need help to s...

Hello,
Could one of the mods. please respond to this?
Still have a problem with paying bill/dd's. As my next bill is due by the end of the week (23/9/11) I will be billed for the whole amount. Due to current circumstances I need to be able to have a monthly budget. This is something I tried to do but without going over old ground this is currently not working. As setting up a DD requires payment of outstanding amounts I am looking for now is options which BT can offer to be able to pay my bill in regular monthly payments. I also have been charged for late payments which is not helping the issue. Could you please clarify what options are available for me to do this? I believe that I have shown 'goodwill' on my behalf to make payments but to stop this from remianing an ongoing problem I would like to resolve this ASAP. Thanks.
Gary Pocklington

Hi oldgreygary
If you drop me in an email I'll have a look over your account and see what we can do for you.
You could also give the billing live chat a try as well, you can get a link for it at the top of this board.
If you would prefer, drop me in an email. Use the 'contact us' form in my forum profile under the 'about me' section. You can find it by clicking on my username.
Thx
Craig
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)”
td-p/30">Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Problem with CPU?? need help badly

Hey guys, its been a sad two days for me.. I have the MSI k7T266 PRO, and yesterday while i was moving tires into my apartment, one of them fell hard on the floor and my computer shifted, i opened the pc to find out that the CPU fan has shifted from the cpu, and the cpu smelled kind of burnt..
Anyway i had an ATHLON XP 2200 i think...
Anyway i went to compusa today and got a new CPU, an AMD 2400+ SEMPRON PROCESSOR. i installed it, put my huge heatsink,fan, and powered up.... NO SHOW..
The Diagnostic LED's show 4 RED lights,(which according to the manual means a problem with the CPU), it was showing 4 red lights with my old blown cpu and its still showing 4 red lights with the new cpu.. im getting frustrated..
Anyway i tried resetting the bios using the JBAT jumper, it still doesnt work..
I know the new CPU is good because i can tell a blown CPU..
So can anyone help me out??

Hello,
http://www.msi.com.tw/program/search/ser/SerConProRes.php?keyword=k7t&kind=
Which one is yours?
The Sempron 2400+ CPU has a 166Mhz FSB.
Your board does not support this CPU.

Problem with shared photo streams in iCloud

I am using version 9.6 of iPhoto on my MacBook Pro (13-inch, Mid 2012). I am using OS X Yosemite version 10.10.1. All of a sudden I cannot see any photos in my shared photo streams in iCloud - all the streams are showing up and the subscribers but it says there are 0 photos. It is the same for mine and other people's shared photo streams. I can still see all the photos on my iPhone and iPad. I have not been able to find a solution online. Any help would be greatly appreciated.

Sometimes it helps to delete the cached copy of the Photo Streams from your user library.
Open the folder ~/Library/Application Support/iLifeAssetManagement/ in your user library in your home folder.
Remove the complete folder iLifeAssetManagement/ to your Desktop and compress it.
Then restart your mac.
Your user library may still be hidden.
To open the hidden User Library:
Quit iPhoto.
Use the Finder's "Go" menu. Click "Go", then hold down the options key, until you are seeing "Library" in the drop down menu appear and click it)
In the window that opens select the folder "Application Support", then look for " iLifeAssetManagement/"

Problem with my photo stream

I connected an iPad that is not mine so I import the photos in it to my external hard drive. My iTunes asked me if I set it as a new iPad or restore from this backup and I chose set as new iPad and it started syncing and I tried to cancel it.
Now the problem is I imported the pictures in the camera roll but when I clicked iCloud on the side bar the iPhoto the iPad photo stream and other photos showed I want to stop and for your information the iPad Apple ID and iCloud are not the same as mine how are the the iPad photo stream got into my mbp ?? I want to stop it without stopping the feature of photo stream in either my mbp and the iPad. And i don't want my laptop to consider this iPad as one of my devices despite i clicked "set as new iPad"

Is there some way to delete and then reset a file for My Photo Stream?
David,
the "My Photo Stream" and "Shared Photo Streams" live in you User Library:
in the folder
~/Library/Application Support/iLifeAssetManagement/assets/
My PhotoStream is in the folder ~/Library/Application Support/iLifeAssetManagement/assets/sub
the shared streams are in ~/Library/Application Support/iLifeAssetManagement/assets/sub-shared
the journals in ~/Library/Application Support/iLifeAssetManagement/assets/sub/pub
I'd recommend you check the permissions on the "sub" folder, and also check if the pictures are there, that should be there.
Also check the permissions on the ILifeAssetManagement.db file, to see if it is writeable.
Your User Library is hidden by default. You can reveal it from the Finder's "Go" menu: click "GO" and hold down the "options" key, until the Library appears in the drop-down menu.
Regards
Léonie

Problem with My photo stream need help.

Similar Messages

Maybe you are looking for