Problem with Number of Columns in XML Report

Hi,
I am trying to make a XML report with more than 64 columns. When i am trying to load the data into MS Word , it is giving me error saying a table cannot have more than 63 columns. If i reduce the no.of columns , then i am able to create the report.Can any one advise me how to overcome the error.
Thanks and Regards
Raj

>
Balaram naidu Bankuru wrote:
> Hello Bhaskaran,
>
> I tried that approach as well,but still issue exists.I am using Generic user id for executing Web Dynpro ABAP application in portal via iView.Does it anything do with generic user id.We also observed one more issue where table columns are getting disappeared..
>
> Thanks,
> Balaram
Hallo Balaram,
Appearance of the column order we have had this problem and i thought that we have solved by position method. Looks like that we have tried that method and didnt work seems now.
As far as i know it is nothing to do with Generic user id except that there are no personalization involved.
Table column disappearing might be a personalization issue.

Similar Messages

Facing problem with a date column in select query

Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me Thanks

Radhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)

Problems with error-page in web.xml and page caching

Having a few problems with error pages and web.xml with browsers caching the error pages and strange errors coming out of weblogic.servlet.intenal.WebAppServletContext
I'm trying to set a web app up so that all http errors and all exceptions are routed thruogh predefined resources. For now, I'm simply send 400 errors to 400.html and the ServletException, IOException and RuntimeException to respective html pages.
What I'm finding is that the error codes work fine but the exceptions are only be routed to the correct error page for the first call to the servlet after server restart.
So for example, I have my servlet throwing a ServletException as a test case. The weblogic server log shows that ServletException is thrown, and the correct error page for ServletExceptions is shown.
If I change the Servlet code to throw IOException in place of SevletException, the weblogic.log shows that IOExceptyion is being thrown (so the servlet has deployed successfully), however the Servletxception error page is shown on the browser.
I'm using IE6 and I've changed the setting such that a new page is requested every time using the tools-internet options-temp internet files-settings option to "check for new versions of stored pages: Every visit to the page".
Despite this, the servlet exception error page still appears.
If you clear the cache from the temp intenet files->delete files IE option, the correct errror page will be shown so it appears that the browser cache is being used after all.
everytime I delete the temp intenet files I get the correct error page on the first request after but then not after that.
I have implemented the service method for this test to throw the exceptions - does this make a differecne?
As a test, I have moved the imlpementation to the doGet method instead bu I now get a strange eror from weblogic comlpaining about an arrayOutOfBoundsException because eror codes in the web.xml are not supported! - see error above.
Any help is appreciated

After further investigation: -
There are no problems with error pages based on error codes, only error exceptions.
As a test case, I have a service method in a servlet throwing either one of the three exception types that servlets can throw (Runtime, Servlet & IO) the following rules apply. The exception to be thrown is hardcoded and is changed and the web app rebuilt each time. The correct web.xml has been deployed to the app server (checked through console). the webapp is being redeployed correctly - this can be seen in the weblogic log, where the correct exception is reported.
I am using WLS 8.1, Servlet 2.3, JDK 1.4.1_02
In all cases, the weblogic log reports that the servlet is throwing the exception as expected.
Despite having set error-page for exception javax.servlet.ServletException, the exceptions are diverted to the error page that has been set up for http error code 500
The error page for ServletException is therefore never reached.
I have the browser set to request pages every time it is asked.
Once the servlet has thrown an IOException, the only way to get the browser to report an IO or Runtime exception error-page is to clear the browser cache. Restarting the server has no effect.
Once the servlet has responded with ANY exception, it is not possible to get it to report a ServletException (which is incorrectly reported as a 500 anyway) unless the cache is cleared. Restarting the server has no effect.
In the case where the servlet throws ServletException, it has no root exception. The servlet 2.3 spec states that if ServletException is thrown but cannot be found in the error pages, the root excpetion will be extracted and the error page list traversed again. Knowing that the RuntimeException error page is correct shown when RuntimeException is throwm, I have nested this inside the ServletException, however error page for http error 500 is still shown.
I don't believe this is a WLS 8.1 problem, as the console shows that the correct exception is thrown each time. this is backed up by the fact that the correct exception page is thrown when the cache is cleared regardless of what exception was previousdly thrown by the servlet. This excludes ServletException which is always incorrectly thrown as a 500.

Problem with creating virtual column

Hello,
We've got problem with creating virtual column.
There is table R_T that contain columns R_ID and L_ID, we would like to create virtual column RL_ID that contains sth like 'R_ID-L_ID' (R_ID, L_ID and RL_ID are varchars).
According documentation we've tried:
alter table R_T add column (RL_ID varchar2(60) generated always as (R_ID||'-'||L_ID) VIRTUAL)
but getting
ORA-00904: : invalid identifier
00904.00000 - "%s: invalid identifier"
Have no idea where is the problem.
Table, columns names are little different but contains only capital letters A - Z and underscore "_".
Has anyone idea?
Thanks a lot.

Strange...
This does work for me :
Connected to Oracle Database 11g Enterprise Edition Release 11.2.0.1.0
Connected as dev
SQL>
SQL> create table r_t (
2   r_id varchar2(25),
3   l_id varchar2(25)
4 );
Table created
SQL> insert into r_t (r_id, l_id) values('R','L');
1 row inserted
SQL> alter table r_t add (rl_id varchar2(60) generated always as (r_id||'-'||l_id) virtual);
Table altered
SQL> select * from r_t;
R_ID                      L_ID                      RL_ID
R                         L                         R-L
SQL>

Problem with number-fields in csv-Export-Files

Hello,
the export with the csv option works fine and our users like this export-function.
But Unfortunatelly we have some problems with the exported number fields. In my region I defined the field with a format mask.
On the screen it looks fine but when I change to csv the values are exported as text-values.
So in excel the columns are shown with left alignment.
When I try to change the format in excel to number, excel change the column type but not the value inside.
On this account we cannot use the sum-function and the display of the value is wrong (alignment).
Which possibilities do I have to resolve that problem?
Thanks in advance
Ulrike

I have the same issue - Anyone any ideas on how to export currency values in a report to excel as numbers?

Print prob: system cannot print the last number of columns of the report

Hi, im having trouble printing my report with more than the standard screen size. i want to print the report in a specific font size, so i created a customized page format. however, it does not print the succeeding columns of the report. what should i do? thanks

Received answer directly from SQL*Plus Development:
"sqlplus does not have a limit on the number of columns it displays."
They created a table with more than 256 columns with data and had no problem retrieving the data.

Problem with running sample code from XML Schema Processor for Java

Hi there,
I downloaded the XML Schema Processor for Java and tried it out. Unfortunately, it failed at the first step. FYI, I included all xmlparserv2.jar and xmlschema.jar in my classpath.
I compiled XSDSample.java with a warning: XSDSample.java uses a deprecated API. Recompile with "-deprecation" for details. There was no problem with compiling XSDSetSchema.java.
When I tried to run report.xml by typing java XSDSample report.xml, I got Parsing report.xml
NonParserException: null.
I guess that report.xml from the sample is not valid.
Could any one give me a hint? Any suggestion would be greatly appreciated.
---Denali
null

Please post this message at:
Forums Home » Oracle Technology Network (OTN) » Products » Database » XML DB

Problem with a 2 columns Range Partitioning for a indexed organized table

have an indexed organized table with a 2 column PK. the first field (datum) is a date field the second field (installatieid) is a number(2) field.
Every minute a 7 records are inserted (installatieid 0-6).
I like to partition this table with one partition per year per installatieid.
I tried to do it with:
partition by range(datum,installatieid)
(partition P_2004_0 values less than (to_date('2004-01,'yyyy-mm'),1)
,partition P_2004_6 values less than (to_date('2004-01','yyyy-mm'),7)
partition P_2005_0 values less than (to_date('2005-01','yyyy-mm'),1)
,partition P_2005_6 values less than (to_date('2005-01','yyyy-mm'),7)
but now only the P_2004_0 and P_2005_0 are filled.
I thought about to combine a range partition on datum with a list subpartition on installatieid, but I read this is not allowed with an index organized table.
How can I solve this problem.

partition by range(datum,installatieid)
(partition P_2004_0 values less than
(to_date('2004-01,'yyyy-mm'))
,partition P_2004_6 values less than
(to_date('2004-07','yyyy-mm'))
partition P_2005_0 values less than
(to_date('2005-01','yyyy-mm'))
,partition P_2005_6 values less than
(to_date('2005-07','yyyy-mm'))
? Sorry haven't got time to test it this morning ;0)

Problems with the alignment in a tabular report

Hello,
I've a tabular report with number columns.
I defined the number-format and set the column-alignment "Right"
but the value is shown left.
How can I change this?
In a normal report the "standard report column" works fine!
Thanks Ulrike

The only solution that I can think of (and there may be others) is to add some javascript at the bottom of the page that loops through the fields and sets the alignment.
Something like:
<script>
var rowcount;
var i;
if (document.forms[0].f01)
rowcount = document.forms[0].f01.length;
if (rowcount > 0)
for (i = 0; i < rowcount; i++)
document.forms[0].f01.style.textAlign = "right";
else
if (document.forms[0].f01)
document.forms[0].f01.style.textAlign = "right";
</script>
Replace "f01" with the appropriate field number for your column (if you are not sure, run the report, right-click, View Source and look for an instance of the field - you want the "name" attribute).
Andy

Problems with Adding Fields/Columns to Crosstab in XI

Post Author: ph03nix
CA Forum: General
I am having problems with formatting a crosstab report in CRXI and am hoping that someone has a solution.
The crosstab report is a subreport, and requires the following columns, grouped by Firm (also not working optimally, but at least working):
Evaluator, Factor1Rate,[Factor2Rate, .., FactorNRate], Summary, UpdateDate, UpdatedBy
Where:
Evaluator is the person that did the evaluation that resulted in each rating (formula field)
Factor1Rate, etc, may have one, many, or all of these be applicable - there can be up to 15 of these. Each FactorRate column is to display the "rating" given by the Evaluator in the corresponding row/column (this much works). The table heading is a formula, but the corresponding rate is not.
Summary should display "Complete" if and only if there is a Comment field (not displayed) filled out for each FactorNRate that has a value of 0, 1 or 5 - otherwise it is blank
DateEntered is one of 2 fields ("last_updated" , or "creation_date" if last_updated is null - a formula field)
UpdatedBy is the last name of the person who last touched the ratings (formula field)
I have gotten the FactorRates to display in the headers, and gotten the corresponding rates to display underneath them, but I cannot seem to add any other columns to the report - they are either added as headers with the factor_rating columns repeated as subgroups (with incorrect data), or are added under existing headers with duplicates of the ratings. I just want to add one column for each field as if it were a normal (non-crosstab) table.
TIA!

the 3 last files
Attachments:
Z1&Z2.vi ‏19 KB
tau_inn (SubVI).vi ‏16 KB
tau_ut (SubVI).vi ‏10 KB

Problems with Range 2D Column Flash Chart

I am having three problems with the Range 2D Column Flash Chart.
1. Series Name: I have two series one named AAA the other BBB. AAA returns two values AAA_MIN and AAA_MAX. BBB returns two values BBB_MIN and BBB_MAX. The Legend shows two series both labeled AAA.
2. Show Hints: The Hint Labels are all AAA even when looking at a BBB value. And the Values show no precision, 0.03 shows as 0.
3. Y Axis Scale not showing precision. My values range from 0.01 to 0.11 and the Y Axis Scale simply shows all 0

Hi Marco.
Thanks for the help.
2 and 3) I have reverted to handling the decimal places declaratively rather then with Custom XML. Thanks for that, I just did not see that setting on the form.
As for (1) I did read something about the column alias was supposed to show as the Label for the Legend and Hints. But I am not doing something right. These are the SQL for each of my two Series. In my Legend and Hints I get:
AAA
AAA
First Series:
Series Name = AAA
SQL =
select
    NULL as LINK,
    to_char(DATETIME, 'DD HH24') || ':00' as LABLE,
    round(min(decode(AAA,0,NULL,AAA)),1) as "AAA_MIN",
    round(max(decode(AAA,0,NULL,AAA)),1) as "AAA_MAX"
from
    ZZZZ
where
    DATETIME between to_timestamp(:P47_SEARCH_X_FROM_DATE,'MM/DD/YYYY HH24:MI') and to_timestamp(:P47_SEARCH_X_TO_DATE,'MM/DD/YYYY HH24:MI')
group by
        to_char(DATETIME, 'DD HH24')
order bySecond Series:
Series Name = BBB
SQL =
select
    NULL as LINK,
    to_char(DATETIME, 'DD HH24') || ':00' as LABLE,
    round(min(decode(BBB,0,NULL,BBB)),1) as "BBB_MIN",
    round(max(decode(BBB,0,NULL,BBB)),1) as "BBB_MAX"
from
    ZZZZ
where
    DATETIME between to_timestamp(:P47_SEARCH_X_FROM_DATE,'MM/DD/YYYY HH24:MI') and to_timestamp(:P47_SEARCH_X_TO_DATE,'MM/DD/YYYY HH24:MI')
group by
        to_char(DATETIME, 'DD HH24')
order by
    2 asc

Problem with display of data of xml in excel2002

Hi!
Good day!I have 2 files.1 .dtd file and another one is .xml file.my xml file is displaying in IExprorer with tree order.but when i open the same .xml file in excel2002,all the data is not displaying in arranged order.even fields are also not following tree order.
I want my xml file should be displayed in excel 2002 with arranged order.All of my fileds should be displayed in the order and data also should be in the order.
not only my own file,any other file i take,it's opening in the excel2002 with improper arrangement columns and data also not displaying in order.
can anybody plz solve it?
thanks in advance....
latha

have a look at jexcill API : http://www.andykhan.com/jexcelapi/
It works fine to generated excel files.

Problems with getting captivate 5.5 to report completion with Internet Explorer?

Hi guys. I've been trying to get my head around this issue for quite a while now. We´ve created a pretty standard course for one of our clients, around 40 slides with some video and a quiz. We just want to check Complete/Incomplete measuring slide view completion. All reporting is as expected using browsers like Firefox or Chrome . But using Internet Explorer 8 or 9, the course reports Incomplete even with all slides visited. This occurs in both of the LMS-systems that I have access to. Has anyone else had similar problems with CP 5.5 and Internet Explorer, or does anyone have any suggestions on possible solutions?
Kind regards
/Jonas

I'm wondering if your issue is perhaps due to IE going into Quirks Mode because of the way the standard Captivate SCORM HTM templates are coded.
One thing IE does not like is having any comments outside the HTML tags at the top of a page. This is something that the Adobe Captivate templates have by default.
Take one of your published test mdoules, open up the HTM file in a text editor and remove this text at the top of the page:


Then try running this again to see if you get better results in your LMS.
If that doesn't work, try using the Pipwerks modified templates for Adobe Captivate. They are much better quality and have removed a lot of bugs that foul up some LMSs.
There's a series of articles on his blog about the changes: http://pipwerks.com/2012/01/11/cleaning-up-adobe-captivates-scorm-publishing-template-part -1-introduction/
You can find the links to download and install his version of the templates on this page: http://pipwerks.com/2012/01/25/cleaning-up-adobe-captivate%e2%80%99s-scorm-publishing-temp late-part-7-giving-the-revisions-a-home/
You need to back up your old templates before changing over to Phil's new versions (there are separate templates for SCORM 1.2 and 2004) but I recommend you at least give them a try.

Problem with mime type in web.xml file

Hi everybody,
I actually got a problem with mime types on Weblogic 6.0 under Linux.
I read the documentation so I added the next lines in the web.xml file in
the WEB-INF directory of my server :
<mime-mapping>
<extension>
doc
</extension>
<mime-type>
application/msword
</mime-type>
</mime-mapping>
<mime-mapping>
<extension>
ppt
</extension>
<mime-type>
application/vnd.ms-powerpoint
</mime-type>
</mime-mapping>
Why can't I retrieve a .doc or .ppt files with an internet browser correctly
? I get only text/plain ...
Can someone help me ?
Regards,
Alexis Berger

I am having the same problem with doc and xsl. I have added this
<mime-mapping>
<extension>xls</extension>
<mime-type>application/vnd.ms-excel</mime-type>
</mime-mapping>
<mime-mapping>
<extension>doc</extension>
<mime-type>application/msword</mime-type>
</mime-mapping>
to my web.xml. I even restarted the server. I still see doc and xsl in binary.
Is there some other setting that needs to take place?
I am using WL6.1 with fixpack 1.
I can see the doc and excel files in the browser if I don't go through the weblogic
server. That just confirms it's not my browser.
Kumar Allamraju <[email protected]> wrote:
<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
It works fine for me in 6.1 SP1.
 
If the following doesn't work , can you
 try application/winword instead of application/msword?
--
 Kumar
Siming Mu wrote:
<blockquote TYPE=CITE>Hi,
I setup in my web.xml a mime mapping as follows,
<mime-mapping>
 <extension>doc</extension><mime-type>application/msword</mime-type>
 </mime-mapping>
When I specify a test.doc url, the doc file appears in my browser
as
binary data
 instead of download.
Please reference change request 055002, which decribes this problem.
According
 to edocs, it has been fixed in wls6.1sp1.
But I am seeing it fixed. Am I doing anything wrong? Thanks.
Siming</blockquote>
</html>

Problem with "Number Generation Program'

Can someone please help me with my Number Generation Program. I am new to java and I am at a sticking point. I want to develop a program that will do the following:
1. Accept a set of numbers (6 numbers per set).
2. Remove duplicate numbers.
3. Generate unique set of numbers (6 numbers per set) using only the numbers that were originally entered.
example: -> numbers entered: 12 33 45 51 7 10
5 34 33 8 11 21
5 6 13 9 10 51
duplicate numbers removed: -> unique numbers
12 33 45 51 7 10
5 34 8 11 21 6
13 9
Final result: -> generate unique set of numbers only using the above unique 14 numbers
5 6 7 8 9 10
5 6 7 8 9 11
5 6 7 8 9 12
5 6 7 8 9 13

I am having a problem with the following:
1. accepting the numbers
2. removing duplicate numbers
3. generating the number sequence sets
As I mentioned earlier, I am new to java. I just completed my first java class and I wanted to develop this program.

Problem with Number of Columns in XML Report

Similar Messages

Maybe you are looking for