Problem with NWMKDE in Small Business Suite 6.0

Hello. I was installed NSBS 6 on Intel server, then I was installed
Support Pack 4 for NW 6.0. Now I have PSVW.LOG full of communicates:
12-08-2006 16:27:11 NWMKDE 00000081 NWMKDE.NLM HAP I System Error:
112.5.0 File: SYS:SYSTEM/PRODAUD3.DB
12-08-2006 16:27:11 NWMKDE 00000081 NWMKDE.NLM HAP I System Error:
111.2.0 File: SYS:SYSTEM/PRODAUD3.DB
This log file is permanently growing. I don't know, what I can do? How I
can eliminate this error?
Thanks in advance
Jerzy Pietrowski

> This log file is permanently growing. I don't know, what I can do? How I
> can eliminate this error?
>
See:
http://www.novell.com/support/search...200%2021044996
unload nlsmeter.nlm
- Anders Gustafsson, Engineer, CNE6, ASE
NSC Volunteer Sysop
Pedago, The Aaland Islands (N60 E20)
Novell does not monitor these forums officially.
Enhancement requests for all Novell products may be made at
http://support.novell.com/enhancement
Using VA 5.51 build 315 on Windows 2000 build 2195

Similar Messages

Problem with connecting to Small Business server 2011 on Z10

I cannot connect my Z10 on Vodafone to my small business server 2011 to receive or send email. No problem with my IOS device. I understand this may be an active sync issue. Can anybody point me in the direction of some sensible advice /guidance to resolve this issue please.

For qeustions regarding RDC, you should post them on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

Installation problem with oracle 11i e-business suite

Hai iam installing 11 i financials for the first time on windows server -2003
i have completed the first stages of validation system configuration .
and later while extracting files from the location it shows error as
1.APPS_ORACLE_HOME environmental file was not created? please tell me how this will be done in detail>
2.Apps configuration was not created?
3.RW-00023 -ERROR-DBC File was not created?
please give the replies in detail
thanks
.

Thanks to previous responder for tip regarding JDK/JRE anchor strings. I'm not sure if that is a problem. After letting the install process (java.exe) run for over an hour, I finally got past the InstantiateFile step. It looks like the process just takes a long time with no visible progress sometimes. After 5-6 hrs, it looked like the install succeeded (for the most part). There were still some errors in the error logs related to the Concurrent Manager (TNS-12541: TNS:no listener) I believe. If anyone has insight on what this error msg means, I would greatly appreciate a reply.
The other problem I am tackling right now is how to explicitly set the Forms processing mode to HTTP rather than the default socket mode. According to the 11i docs (and Forms Developer 6i docs), you should only have to set "connectMode=HTTP" in the config file, appsweb.cfg, to make this happen. However, when I try bringing up a client form, the form hangs. So, obviously, something is amiss. A related question is whether one can run Forms in only HTTP mode and not HTTPS (and thus avoid having to install SSL). I would greatly appreciate any insight from fellow users.

Problem with two of my business rule triggers

Good morning every one,
I have a small problem with two of my business rule triggers.
I have these tables:
pms_activity
csh_cash
csh_integrate_leh
csh_integrate_led
and my process goes like this:
upon approval of a row in my pms_activity table I have a trigger that insert a row in my csh_cash - and in the csh_cash table I have a trigger that will insert in the csh_ingerate_leh and csh_integrate_led.
my problem is pms_activity does generate a row in csh_cash but the trigger in the cash does not fire to generate a row in the csh_integrate_leh and led tables.
I have generated in the following order after I created my business rule:
I have generated the table from the designer (server module tab)
I have generated the CAPI from the head start utility
I have generated the API from the designer
I have generated the CAPI from the designer
I have run the recompil.sql
I have checked that my business rule trigger is enabled and should run on insert and no where restriction
=== this is my business rule logic ======
l_rule_ok boolean := true;
begin
trace('br_csh001_cev (f)');
csh_gl_pkg.csh_gen_integ_jvs(p_id
,p_ref_num
,p_own_id
,p_trt_id
,p_value_date
,p_description
,p_amount
,p_cur_id
,p_gla_dr
,p_gla_cr
,p_gla_pl
,p_gla_rev
,p_gla_eqt);
return l_rule_ok;
exception
when others
then
qms$errors.unhandled_exception(PACKAGE_NAME||'.br_csh001_cev (f)');
end br_csh001_cev;
==== end =======================
Any help will be appreciated as I have struggled with this for two days.
Thanks

hmmm...
Try resetting it again and restoring with the same backup file...
Does the phone work properly once you've reset it before you try restoring? A lot of people here have experienced problems restoring from backups... could be worth forgetting about it and starting from scratch.
You could try contacting your nearest Nokia Service Centre (www.nokia.com/repair) and see if they can do anything - it may need the firmware reinstalling or upgrading... possibly... give them a call though and see.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

Novell Linux Small Business Suite based SLES9 - IBM X3200M3

Good day,
We need migrate our Novell Linux Small Business Suite ver 9.0 to new hardware, especifically IBM X3200 M3.
How to proceed to allow installing in IBM system?
Thanks for your time
Regards,
Juan L. Mera

jmera,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Problem with create universe on Business Objects XI 3.1 base on SAP Query

Hello,
I have a problem with create universe on Business Objects XI 3.1 base on SAP Query.
The problem is hierarchy. Massage on Busines Objects is :
OWBS_ELEMT__ISTKOSZT(cube ICPC01/BEX_ICOC01):Exception condition "HIERARCHY NOT FOUND" raised.(WIS 10901)
Query in BEX run OK.
Best regards.
Ela.

Hello,
Thanks for response.
When I run BEX QUERY, all works OK.
All hierarchies was created and activated on system BW.
This situation appears after upgrade BW to SAP NetWeaver 7.3.
Before upgrade I created universe without any problems.
Regards Ela

CS4 issues with Microsoft Office Small Business 2007? Other apps?

I recently purchased the CS4 upgrade and a new laptop. Last night after nearly 7 hours I finally got it all installed and working correctly. I had the versioncue.dll error which caused most of my pain. Anyway... I've been lurking on the forums since CS3 launched but passed on it due to all the issues I had read about it's installer, finally I felt I needed to take the plunge and upgraded my software (from MX2004 suite). My question is this.
Currently I have a very clean laptop with only:
Kaspersky 2009 and CS4 installed.
I'm looking to install Microsoft Office Small Business 2007 but I have a concern with the Small Business Manager SQL Server. From other post I've seen that the sql servers have conflicted with adobe applications, has anyone had any issues with this or should I be able to install it now without issue. I'm trying to pre-emptivly make sure I don't screw something up and have to install everything again from scratch.
My end goal would be to have: Kaspersky security suite 2009, CS4, MS office Small Business 2007, Paragon back up application. At that point I want to create a restore and if anything happened I'd have the bulk set up easily again.
Does anyone have any other no no's about what does and does not play well with CS4?
My Setup:
Gateway FX 7805u laptop
dual core centreno 2 2.26
4 gigs DDR3
Geforce 9800m gts 1 gb
320 gb 7200 harddrive - not sure on make
Vista 64
All drivers up to date except the new Nvidia drivers as they are still beta
Thank you in advance.

I should also have mentioned (ask) about the fact that when I first installed I had gotten all the way past the initial installer and to the updates so the suite had already been activated/registered.
After getting the versioncue.dll error it has you remove the suite and many folders pertaining to it. So after I did all that and reinstalled it automatically put my info back in for me (obviously one of the folders it doesn't have you move) and I don't recall it re-registering it again. I'm assuming I am fine with my activations and it only counted it once as it was the same machine with an uninstall/reinstall? Everything seems to be working ok, i'm just curious as to what it actually did? Did it take another activation or no? I'm planning on installing to my desktop as well as soon as I get the board/proc replaced, so i'm just looking down the road for potential issues.
Thanks again.

Problem with BP. Assignment: Business partner person to user not unique

I have a problem with a user. They have no BP assigned in PPOSA_BBP. We have found a BP in transaction BP.
When we try the BBP_BP_OM_INTEGRATE the message BBP_UM_UI048 appear" Assignment: Business partner person to user not unique" .
Any idea about how solve this??
Best regards
Jorge

Hi
Which SAP version are you using ?
The user needs to be attached to the Org Plan. (PPOMA_BBP)
Have you maintained the Contact person for this USer in the Org Plan. (PPOMA_BBP) ?
Please check the consitency of this BP as well.
Have you read the documenattion of the Transaction -> BBP_BP_OM_INTEGRATE ?
If no, here it is..
Transaction -> BBP_BP_OM_INTEGRATE
Short text
Object Synchronization and Repair
Purpose
This report enables you to run a consistency check for the integration of HR Master Data and Business Partner data. If not all data exists for the business partner, you can first synchronize data. When synchronization is run for organizational units, the basic data (name, description) and the address data is included; when synchronization is run for central persons, bank information is included in addition to the basic data and address data.
Prerequisites
To be able to run this report, integration between Organizational Management and SAP Business Partner must be active.
Features
This section contains information about the functions you can use to select and output data.
Selection
The following options enable you to restrict the selection of objects:
Central Person
In addition to selecting central persons created during integration between HR Master Data and Business Partner data, you can also select central persons who have been created locally. However, central persons created locally are not checked for consistency.
Employee (object type P)
This selection option is only available in HR systems. The corresponding central person is displayed together with the person. Both objects are kept consistent in the Basic Data, Address, and Bank Data columns.
Positions
Business Partners (Employee role)
Users
Organizational Unit(s)
You can specify specific organizational units for the selection.
Business Partner (Organizational Unit role)
Note:
The selection objects Position, Business Partner (Employee role), User, and Business Partner (Organizational Unit role) are only available if an implementation of BAdI HRALX_HRALXSYNC_BADI exists.
Branch as of Organizational Unit
This option enables you to select all objects in the structure for one or more organizational units. You can also restrict selection according to one of the following object types:
Central Persons Only
Employees Only
Positions Only
Business Partners Only (Employee role)
Users Only
Organizational Units Only
Business Partners Only (Organizational Unit role)
Include All Object Types
Changes Since
All organizational units and central persons for which changes have been made since the last time all objects were synchronized are read. When all objects have been synchronized successfully, a new change date is set.
Note:
If a selection has been made but the relevant input field remains blank, all objects of a particular object type are read from the database. This condition can lead to a long runtime, therefore, SAP recommends you also enter a restriction.
Output
The organizational units and central persons that have been found are displayed in a list that includes status data.
To facilitate navigation, a hierarchical tree structure is displayed on the left-hand side of the object list. The branches are sorted according to the type of action that is to be executed.
If an implementation of BAdI HRALX_HRALXSYNC_BADI exists, checks from this BAdI are executed in the External Checks branch.
If you double-click on the folder icon in the navigation tree, all objects are displayed in the list.
Note:
Meaning of status display for data in the Basic Data, Address, and Bank Data columns:
Icon Message Text Meaning
Green traffic light Business partner does not need to be synchronized with HR object data All business partner data is consistent with HR object data.
Yellow traffic light Business partner does need to be synchronized with HR object data Business partner exists. The business partner data is not consistent with the HR object data.
Red traffic light Object data is new and must first be created for the business partner The business partner does not yet exist or the the business partner data is incomplete.
No traffic light Object type does not include this type of data Check type is not relevant for this object.
Activities
To integrate business partners or to repair selected objects, you must select the relevant lines in the object list and choose Execute. Any errors that occur are displayed after synchronization.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

Problem with Stacked Columns in Business Graphics

Hi,
Has anyone used the stacked columns chart type in business graphics? Am facing a problem with this.
I am using the SimpleGraphics example demo with 2 dataseries, the values ranging from 0-10. It works fine if the chart type is Columns (this is default). When I change the chart type to stacked_columns, the graph goes for a toss. The y-axis range automatically changes to 0-1 (values as 0, 0.2, 0.4 ... 1.0) and it does not display stacked columns as expected.
Is there any specific property(s) that need to be set for this chart type?
Appreciate any quick response.
cheers,
Vittal

Hi friend,
See the link below it is having the solution of hiding the columns in smart forms
Hide table columns in smart form?
Create a table to display your values with 12 col and hide the columns based on the idea provided in the link above.
I think this will solve your issue if you still have queries please revert back to me i will help you.
Thanks,
Sri Hari

Problem with "Shockwave Flash is busy or not responding" message

Hello,
I am getting the "Shockwave Flash is busy or not responding" message, visiting the site on which I am working on for one client. Site is http://www.puntacanajustsafari.com/
I have installed one flash widget for weathercast and imediatelly after installing I have got the message "Shockwave Flash is busy or not responding" - browser, buttons, scrolling - everything simply freeze! Few minutes just standing by, not responsive, and then eventually page start to scroll normally. Since then I changed widget position, made it to show on tour page only ( http://www.puntacanajustsafari.com/punta-cana-jeep-tour/ ) but after facing the same problems with flash thing I have removed it completely and installed one other widget and made separate page for weather information, that seems to work nicely (for now).
Problem is that I am still geting "frozen" page when visiting home page and tour page, even after clearing the page cashe and removing widget. This is happening on both browsers that I use (firefo and IE) so I am partially sure that is not a browser problem. This is first time happening to me, if somebody can figure out what to do, I would appreciate it.

Clear your browser's cache and cookies. I'm not seeing any issues in Firefox, Chrome or IE
Nancy O.

Problems with Standard Apps views (eBusiness Suite)

Hi all,
I am working with Oracle Application Express and Oracle eBusiness Suite 11.5.10. We have integrated OAE with EBS, but now we are having problems with the standard views (owner APPS).
I would need the help from somebody that works with OAE and EBS.
Once we want to query one of the standard views, like ap_invoices, it is necessary to initialize the session with a script like this:
begin
DBMS_APPLICATION_INFO.SET_CLIENT_INFO(219);
end;
This script lets us to access to the data from the table AP_INVOICES_ALL using the view AP_INVOICES.
Once I have run the script from SQL Commands (SQL Workshop), I try to run a query using the standard view, for example:
SELECT * FROM apps.ap_invoices
From a Report or from SQL Commands (SQL Workshop) always I get the next error:
"ORA-01722: invalid number."
However, if I run this query from SQL Plus (same db user), there is any problem, the query works and retrieves rows.
If I get the source code of the view, remove all the columns, keeping the next SQL:
SELECT 1
FROM ap.AP_INVOICES_ALL
WHERE NVL(ORG_ID,NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)) = NVL(TO_NUMBER(DECODE(SUBSTRB(USERENV('CLIENT_INFO'),1,1),' ',NULL,SUBSTRB(USERENV('CLIENT_INFO'),1,10))),-99)
Run this SQL in OAE and I obtain the error again, however from SQL Plus the query works correctly.
I suppose somebody that works this EBS and OAE has had this problem. How did you solve it?
Thanks in advance.
Regards, Luis
PD. I have tried to not used the views and use the tables filtering the ORG_ID and looks it can work, but I do not like this option.

Luis - I don't know where you are running these blocks - the SQL Command Processor in APEX? Anyway, for every APEX page request the engine executes something like the following, depending on your version:    begin
    dbms_application_info.set_client_info(g_user);
    dbms_session.set_identifier(substr(g_user,1,(64 - length(g_instance)-1))||':'||to_char(g_instance));
    dbms_application_info.set_module('APEX:APPLICATION '||to_char(g_flow_id),'PAGE '||to_char(g_flow_step_id));
    exception when others then null;
    end;In the above code, the value of g_user is the logged-in username, perhaps ADMIN in your case.
Keep in mind that when you do a set_client_info in the database session, that persists only for the duration of the session. On the next page request, you'll get a new database session (or a recycled one).
Scott

No login page with Solution Beacon E-Business Suite Release12 .1.3 (Vista)

Hello,
I am a new user of this solution, I have a CSI code, and a user account.
The problem is that time and now I can not access the login page . I
want to now if this is a internal problem server?
If the problem persists there is another free version to access the
environment of the Oracle E Business Suite.
Waiting for an answer, thank you in advance .

Tarik.Bensalim wrote:
Hello,
I am a new user of this solution, I have a CSI code, and a user account.
The problem is that time and now I can not access the login page . I
want to now if this is a internal problem server?
If the problem persists there is another free version to access the
environment of the Oracle E Business Suite.
Waiting for an answer, thank you in advance .We don't maintain Solutions Beacon instances so please contact their support for help.
Alternative links can be found in https://forums.oracle.com/forums/search.jspa?threadID=&q=Solution+AND+Beacon&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

Hi I have a problem with updating my CS5 premium suite

Hi I have a problem after install my CS5 premium suite, It won't download and install updates. The error is: An error occurred, when downloading this update, close and try again. Its all programs in the suite, photoshop, illustrator etc. Whats going wrong?

Hi Cltor,
Please download and install the updates manually from : Product updates
and check.
Regards,
Rave

Problems using Outlook 2013 with Exchange Server Small Business Server 2003

Hello,
We have just upgraded our Office suite from Office 2007 Pro to Office 2013 Pro. When I try to configure Outlook 2013 to connect to Exchange Server 6.5 (SMS 2003) I get an error "Outlook 2013 being blocked by current version of Exchange Server".
Outlook 2013 at present is not communicating with Exchange server 6.5
Are there any fixes I have to install on our SMS 2003 server to allow Outlook 2013 to work with SMS 2003 Exchange Server?
Any configuration changes I need to make? Any help is appreciated.
Thx
John G.
John Grace

Hi
Outlook 2013 is not supported with exchange 2003:
http://technet.microsoft.com/en-us/library/ee624351.aspx#section10
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Netware Small Business Suite 6.6 - Compatible with PE 2900 with Integrated PERC 5i

Has anyone tried installing SBS 6.6 on a PE 2900?
M.S.

> As I recall, the only problem I've has with the "roll your own" SBS using NW
> overlay CDs is that you need to find a copy of the domain.db for the GW
> install. If you don't use SBS install disks, the domain.db isn't installed,
> and it doesn't seem to be on some of the GW disks (unless you've got genuine
> Novell GW disks).
OK -- that makes sense. I had a client recently needing to add a new
server to their SBS 6.6 environment. Since they already had a Dell
2800 and a Dell 1800, I went the simple way -- expended the effort to
track down a Dell 2800 from the very active resale market on eBay --
with a full Dell warranty. Got a good deal on the hardware (including
a 6x300G SCSI RAID 5 configuration and the embedded DRAC support), and
installing was very easy indeed.
Barry Schnur
Novell Support Connection Volunteer Sysop

Problem with NWMKDE in Small Business Suite 6.0

Similar Messages

Maybe you are looking for