Problem with ORA-15063

Hi,
I've installed Oracle RAC (10g) on Centos 5.3 But after restart system, I can't mount ASM disk on second instance. During mounting I have such errors:
ORA-15032: not all alterations performed
ORA-15063: ASM discovered an insufficient number of disks for diskgroup "DG1"
I found this tutorial http://askdba.org/weblog/?p=104, but I don't really know if my parameters are set correctly... Could anyone help me and explain what is wrong with my database? Screen from my architecture below:

Hi,
ORA-15063:
     ASM discovered an insufficient number of disks for diskgroup "string"
Cause:      ASM was unable to find a sufficient number of disks belonging to the diskgroup to continue the operation.
Action:      Check that the disks in the diskgroup are present and functioning, that the owner of the ORACLE binary has read/write permission to the disks, and that the ASM_DISKSTRING initialization parameter has been set correctly. Verify that ASM discovers the appropriate disks by querying V$ASM_DISK from the ASM instance.
And there is possible solution
http://oracledba.blogspot.com/2007/04/asm-instance-ora-15032-and-ora-15063.html
regards,
Tom

Similar Messages

Problem with ora-28000 error

Hi all,
I got a problem with ORA-28000 in my form. In my app, it allows user to try maximum 3 time to logon, if the user fails, his/her user will be locked. The problem is, when Oracle locked that user, in on-error trigger I cannot catch that error and show the error message.
Anybody, please give me a hand.
Thank alot

I put code (in the on-error trigger) here. please have look, thanks again.
IN_ERR_CODE NUMBER := ERROR_CODE;
BEGIN
     IF(IN_ERR_CODE = 28001) THEN
     ELSIF (IN_ERR_CODE = 28002) THEN
     ELSIF (IN_ERR_CODE = 28011) THEN
     ELSIF (IN_ERR_CODE = 28000) THEN
          MESSAGE(ERROR_TEXT);
          --LEAVE_FORM;
          --clear_form(no_validate);
          --RAISE FORM_TRIGGER_FAILURE;
          --EXIT_FORM(NO_VALIDATE);
     END IF;
END;

Problem with ORA-25240 and msgId:=NULL

Hi,
I have a problem with ORA-25240- the documentation says that you cannot specify a message ID and correlation ID int the dequeue- options. However I am getting it setting msgid explicitely to NULL!
The code snippet is:
vr_message jms_message_with_header_type;
vr_dequeue_options DBMS_AQ.dequeue_options_t;
v_message_handle RAW(16);
BEGIN
vr_dequeue_options.deq_condition := 'tab.user_data.header.properties IS NOT NULL AND '
|| 'tab.user_data.get_string_property('MYServicename'') = '''
|| i_MY_Servicename || '''';
vr_dequeue_options.correlation := i_correlation;
vr_dequeue_options.navigation := DBMS_AQ.FIRST_MESSAGE;
-- should be default anyway:
vr_dequeue_options.msgid:=NULL;
vr_dequeue_options.wait := DBMS_AQ.NO_WAIT;
DBMS_AQ.DEQUEUE
queue_name => 'MYQUEUE',
dequeue_options => vr_dequeue_options,
message_properties => vr_message.header,
payload => vr_message.message,
msgid => v_message_handle
Any ideas?
Thank you,
Steffen

Hi,
the version is:
SQL> select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for HPUX: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL>
The example behind the link is not complex enough. They are not using deq_condition and correlationId of the deque- options. If I set one of these values to NULL the code works fine but it complains about msgId if I have both values set with msgId=NULL?!?
Thanks,
Steffen

Problem with ORA-24372 invalid object for describe

I have unresolved problem with oracle message: ORA-24372 invalid object for describe. There is the client-server application which installed on users PCs. Client application is program on Delphi 7 that installed on several users PCs which works with Oracle DB 10g server (clients on users side 8.1.7) by means ODAC 5.7. Each user by means this application works with data on Oracle server. Each group of users uses its own schema. Each of this schema has grants to select data and execute procs in the main schema. During the time of operation I modified and compiled some procs in the main schema. As the result I found some depended Invalid objects in main schema. I recompiled them. There is no invalid objects in all schemas. But when I starts application in one user place (he uses for example schema X1) I see oracle message: ORA-24372 invalid object for describe. Other users in group which uses schema X1 works without this problem. There is finite aggregate of users of schema Х1 which has this message but some users of schema Х1 has no problem. All users has identical software and there is no any invalid objects in schemas! I try to start application on my PC using schema X1 and finds ORA-24372 then I try to start application on neighbors PC and it is all ok! It happened after I recompiled main schema in the time of users operation. What should I do to resolve this problem? Where to find the source of the problem: in client or in server?

To Mr. Sven Weller
The purpose of creation X1 (X2, Х3…) was restriction of users to access objects in the Main Schema. X1 has no any objects except function that returns her name for internal purposes. X1 has many synonyms for objects in the Main schema. There is no invalid objects in X1!

Resolving problem with ORA-01031: insufficient privileges

hello i just to write a few word about my installation of oracle database 9i
My installation is on a Red Hat AS3
I have a problem with the error :ORA-01031: insufficient privileges
The one who read this know what about i tell.
The authorization is only for the user which Group is DBA as you can read everywhere.
but me when i tried groupadd dba => it tells group already exist.
but i can't find the group dba in the file /etc/group.
So i tried to make my user 'oracle' works with the 'already group exist' dba .
useradd -g dba oracle
but when i tried to start the database i create i have the message. : ORA-01031: insufficient privileges
i tried to add manualy the group dba to /etc/group (as i can read in websites)
and add a user manualy (/etc/passwd).
But does works.
I try all i can during 1 days long.
I was really upset because nothing that i read work.
finaly I go to the RedHat Menu (things i don't really do normaly on LINUX) and go to 'SYSTEM SETTINGS' and choose 'User and Group'
Here i can see my user 'Oracle' I get the property of the user .
there is a tab group ( 'select the group that the user will be member of:')
None of them where name DBA so i decidied to select all of them and tried.
MAGIC!!! then it works!!!
ps: after when i see the list of the group I saw that one of them is named 'SYS' . I really think that it is the one group i had to select. but don't know.
Now It is working for me so... And good luck for you. bye.

Errors
ORA-01031 "insufficient privileges"
Symptoms
During database upgrade phase using DBUA , it fails with error
ORA-1031 Insufficient privileges
Connection from sqlplus also fails with same error
$ sqlplus /nolog
SQLPLUS "conn / as sysdba"
ORA-1031 Insufficient privileges
Changing the REMOTE_LOGIN_PASSWORDFILE to SHARED / NONE does not make differen
Cause
ORACLE_HOME owner oramigts is part of OS group "dba" ,but config.s shows group "g680"
The 'OSDBA' and 'OSOPER' groups are chosen at installation time and usually both default to the group 'dba'.
These groups are compiled into the 'oracle' executable and so are the same for all databases running from a given ORACLE_HOME directory.
The actual groups being used for OSDBA and OSOPER can be checked thus:
cd $ORACLE_HOME/rdbms/lib
cat config.[cs]
Solution
To implement the solution, please execute the following steps:
1. Checked the ORACLE_HOME owner.
echo $ORACLE_HOME
/h02/app/oracle/product/9.2.0_64
cd / h02/app/oracle/product/
ls -l
drwxr-xr-x 58 oramigts dba 1024 Jan 2 2004 9.2.0_64
2.ORACLE_HOME software owner "oramigts" is part of group "dba"
3.Checked file $ORACLE_HOME/rdbms/lib/config.s
[If your platform has config.c:
Due to the way different compilers under different architectures generate
assembler code, it's not possible to give a universal rule.]
It shows dba group as "g680" where software owner is part of "dba" group
You can more find detail on config.s / config.c in the following doc.
Note 50507.1 SYSDBA and SYSOPER Privileges in Oracle
4. Modified the config.s for correct group.
.ascii "g680\0"
to
.ascii "dba\0"
7. mv config.o config.o.bak
8. make -f ins_rdbms.mk config.o ioracle
9. Checked the file config.o is created at $ORACLE_HOME/rdbms/lib
10. Connected / as sysdba thru Sqlplus from 9.2 Home, which connected sucessfully.

Problem with ora:output and xmlns attribute

Using lastest XDK.
I am using the built in extension ora:output in a stylesheet running via XSQL called from a small java prg.
I am using this to generate several html fragments that will get processed later on not by xsql or xml/xsl but by another java prg.
I have specifed the output as html BUT when I look at the output some of the elements have an xmlns attribute added i.e. xmlns:ora="http://www.oracle.com/XSL/Transform/java"....
Strange thing its not on all elements, "a", "tr", "td" tags are ok but "b", "br" and "table" have this attribute added.... HELP!!
How do I stop this attribute getting added...
Many thanks
Rob
PS I know if I use an "html" tag to wrap the output then only that element ends up with the xmlns attribute but I cant/dont want to do this as the prg running later will combine many of these fragments to create a single "real" html page.

I'm not sure whether i understand your problem,
It doesnot need using the binding attribute If you wanna updating the value of each rows in the datatable.
below is a sample that updating each rows of a datatable
jsp file
<h:dataTable value="#[sampleBean.data}" var="row">
    <h:column><h:inputText value="#{row.col1}"/></h:column>
</h:dataTable>
<h:commandButton value="update" action="#{sampleBean.update}"/>BackingBean:
SampleBean.java
public class Samplebean{
private SampleRow[] rows[];
public SampleRow[] getData{
          return rows;
public String update(){
      for(int i=0; i<rows.length; i++){
         rows.update();
return "success";
SampleRow.java
public class SampleRow{
private String col1;
public String getCol1(){
    return col1;
public void setCol1(String col1){
    this.col1 = col1;
public void update(){
     //write your code to save one row data to db/file here

Problem with ORA -03113 End of Communication Channel

Hello,
Oracle Database 10g Release 10.2.0.1.0 - Production
Windows Server 2003 Version V5.2 Service Pack 2
Im having this problem when executing an stored procedure that executes a SQL statement wich has uses db links... I get this end of communication channel error.. so I thought it was a network issue, but all connections are fine.
The thing is that the procedure works fine, but just out of the nothing starts to give that problem, shutting down the database would not correct the problem, only restarting the server will fix the issue temporarily. I checked the dump file related to the process am running and I found this, I think it might be like a memory problem but not sure
Windows thread id: 5632, image: ORACLE.EXE (J002)
*** ACTION NAME:() 2010-09-01 09:18:59.490
*** MODULE NAME:() 2010-09-01 09:18:59.490
*** SERVICE NAME:(SYS$USERS) 2010-09-01 09:18:59.490
*** SESSION ID:(545.34045) 2010-09-01 09:18:59.490
*** 2010-09-01 09:18:59.490
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_kghalf+478] [PC:0x603BEB04] [ADDR:0x61E26AE8] [UNABLE_TO_WRITE] []
No current SQL statement being executed.
what do you recommend me to try here?

Hi Ogan,
I agree ! Of course we are often obliged to compose with minimal downtime, testing resources, editors, management, time etc.
I have the same problems but keeping the base version is a pain and if you consider 10.2.0.5 you won't have to install many patchsets after this one on the 10gR2 homes/databases. It's a "good" investment if you have to keep the 10gR2 for several years (going to 11g is more difficult than installing a patchset !)
Oracle patchsets are great and well tested and if you pay your Oracle license you pay for that ! The patchsets, patchset updates, support make the difference with the versions you can download "freely" on OTN.
Best regards
Phil

Problem with ORA-19025 when joining tables

I am querying a table that stores xml datata in an xml column. I an query this column without problems. If I join the table with another table (not xml). I get the error below.
ORA-19025: EXTRACTVALUE returns value of only one node
19025. 00000 - "EXTRACTVALUE returns value of only one node"
*Cause: Given XPath points to more than one node.
*Action: Rewrite the query so that exactly one node is returned.
I don't seem to have any subnodes in the fields I am querying and I dont know how joining to the second table introduces the problem.
This produces the error I mentioned before
SELECT a.NAME,
EXTRACTVALUE(xmltype(a.DOCUMENTATION), '/metadata//idinfo/citation/citeinfo/title') TITLE,
EXTRACTVALUE(xmltype(a.DOCUMENTATION), '/metadata//idinfo/citation/citeinfo/origin') ORIGIN,
EXTRACTVALUE(xmltype(a.DOCUMENTATION), '/metadata//idinfo/citation/citeinfo/pubdate') PUBLICATION_DATE,
GDB_ITEMTYPES.NAME
FROM GDB_ITEMS_vw a, GDB_ITEMTYPES b
where a.UUID = b.UUID
This one gives no error
SELECT a.NAME,
EXTRACTVALUE(xmltype(a.DOCUMENTATION), '/metadata//idinfo/citation/citeinfo/title') TITLE,
EXTRACTVALUE(xmltype(a.DOCUMENTATION), '/metadata//idinfo/citation/citeinfo/origin') ORIGIN,
EXTRACTVALUE(xmltype(a.DOCUMENTATION), '/metadata//idinfo/citation/citeinfo/pubdate') PUBLICATION_DATE,
FROM GDB_ITEMS_vw a
I am using 11g 2
Any suggestions are welcome
Thanks
Edited by: user3444035 on Mar 18, 2011 1:43 PM

Hi,
Could you give some sample data from GDB_ITEMS_vw and GDB_ITEMTYPES?

Temp Tables space problem with ORA-01114 and ORA-27072:

RDBMS :Oracle:9.2.0
OS: Linux AS3
Storage: SAND arrray (RAID 5)
Problem on exeuting dml statement
SQL> select * from myview ;
select * from myview
ERROR at line 1:
ORA-01114: IO error writing block to file 201 (block # 3977)
ORA-27072: skgfdisp: I/O error
Linux Error: 28: No space left on device
Additional information: 3976
ORA-01114: IO error writing block to file 201 (block # 3977)
ORA-27072: skgfdisp: I/O error
Linux Error: 28: No space left on device
Additional information: 3976
With Regards
Joy

Hello joy,
So, still looking for solution. I suggest you a sloution and it works well only if as you mentioned (in your previous post) that file causing error is temp file. So, get rid of this better you create new temporary table space and drop old one and then delete the old files manually.
But this will work only for Temp Tablespace not for normal tablespaces and datafiles. Prepare new temporary tablespace at different location from the previous one, try to make it on different disk beacuse it may be due to corruption of physical medium too.
Try this. If it works... you are through... otherwise i have no other options...
Please update.....

XSU Insert Problem with ORA-00001

Hi,
I am writing an application which will extract a series of tables from a source database and then populate a target database.
I am using the XSU utility to extract each table individually into its own physical XML file.
The extraction goes well, but on some tables the population has a problem.
During the population process, the OracleXMLSave utility throws an exception:
Error in loadFile oracle.xml.sql.OracleXMLSQLException: Exception 'java.sql.SQLException:ORA-00001: unique constraint (MYDB.SYS_C001346) violated encountered during processing ROW element 97All prior XML row changes were rolled back. in the XML document.
I know for a fact that there is no duplicate primary key entries in the physical xml file.
I am using the XSU - XSU12_ver2_1_0_beta with JDBC2.0 (JDK1.3 and loadable into Oracle8.1.7
Has anyone seen this?
I am at a critical point in the project. Any help appreciated.
Mario Andreoli
ComponenTech.com
[email protected]

Hi,
I am writing an application which will extract a series of tables from a source database and then populate a target database.
I am using the XSU utility to extract each table individually into its own physical XML file.
The extraction goes well, but on some tables the population has a problem.
During the population process, the OracleXMLSave utility throws an exception:
Error in loadFile oracle.xml.sql.OracleXMLSQLException: Exception 'java.sql.SQLException:ORA-00001: unique constraint (MYDB.SYS_C001346) violated encountered during processing ROW element 97All prior XML row changes were rolled back. in the XML document.
I know for a fact that there is no duplicate primary key entries in the physical xml file.
I am using the XSU - XSU12_ver2_1_0_beta with JDBC2.0 (JDK1.3 and loadable into Oracle8.1.7
Has anyone seen this?
I am at a critical point in the project. Any help appreciated.
Mario Andreoli
ComponenTech.com
[email protected]

Strange problem with ORA-12154 from only one client

Hi all,
I have a strange problem.
I have three 11.2.0.1 databases on three different hosts.
For simplicity lets say:
Host1: database ovm1a
Host2: database ovm7a
Host3: database ovm8a
I have a database schema in all three databases named EHJ. In all three databases, there are fixed user
database links to the other databases. So EHJ in ovm1a has two links, one to ovm7a and one to ovm8a. The EHJ schema in ovm7a has two fixed user links to the EHJ schema in the ovm1a and ovm8a databases. And the same is true for the EHJ schema in the third database, ovm8a.
If I log into the EHJ schema for each of the three databases, I can successfully select over the database links. I've been using the SQL statement: select count(*) from user_users@dblink_name;
For each of the two links in each of the three databases, the query returns 1 so I know the database links are working properly and I have my networking setup properly.
Now, here is the weirdness.
I have an Oracle Application Server where our Oracle Forms and Reports run. The Oracle client on this install is 10.1.0.5. I've got a tnsnames.ora file setup on this Oracle App server to connect to all three databases ovm1a, ovm7a and ovm8a. I can successfully use the 10.2.0.5 client SQL*PLUS to connect to the EHJ schema in the ovms1, ovms7 and ovms8 databases.
However, (and only when) connected to the ovm1a database from this client, attempts to select over the link throw the famous error: ORA-12154: TNS:could not resolve the connect identifier specified
This error happens with both links in the ovm1a database when connected via this one client.
BUT, if I connect using the same 10.1.0.5 client to the EHJ schema in the ovm7a or ovm8a databases, the database links in those two databases are working just fine.
I'm pulling my hair out trying to figure this out.
I've tried using SQL*PLUS from my desktop machine (10g R2 client) connecting to the EHJ schema on all three databases and the db links all work fine.
Any help in trying to troubleshoot this would be greatly appreciated.
Cheers

JSebastian wrote:
I have an Oracle Application Server where our Oracle Forms and Reports run. The Oracle client on this install is 10.1.0.5. I've got a tnsnames.ora file setup on this Oracle App server to connect to all three databases ovm1a, ovm7a and ovm8a.But the client (and tnsnames.ora) in question here is actually one (each) of the three databases, right? I.e. error is thrown by the db server, acting as client (db link side).
>
However, (and only when) connected to the ovm1a database from this client, attempts to select over the link throw the famous error: ORA-12154: TNS:could not resolve the connect identifier specified Connected how, as opposed to when you "successfully select..."?
This error happens with both links in the ovm1a database when connected via this one client.Does Oracle config files on ovma1 host differ from the other two db hosts?
Does
SQL> select property_name,property_value from database_properties
2 where property_name in ('GLOBAL_DB_NAME','NLS_RDBMS_VERSION');
SQL> select owner,db_link,host from dba_db_links;return as expected on all three db's?
I've tried using SQL*PLUS from my desktop machine (10g R2 client) connecting to the EHJ schema on all three databases and the db links all work fine.Make sure you are connecting to correct databases. (Simply, three tns aliases could all be pointing to the same database.)
Edited by: orafad on May 25, 2011 11:24 PM

Creating database problem with ORA-01519: error while processing file '' ne

Dear all,
I am having rough time with creating database manually. can anyone help me with the following errors.
ALERT LOGFILE:-
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\udump\oracle5_ora_3444.trc:
ORA-01501: CREATE DATABASE failed
ORA-01519: error while processing file '%ORACLE_HOME%\RDBMS\ADMIN\SQL.BSQ' near line 5744
ORA-00604: error occurred at recursive SQL level 1
ORA-01119: error in creating database file 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf'
ORA-27040: file create error, unable to create file
OSD-04002: unable to open file
O/S-Error: (OS 3) The system cannot find the path specified.
Error 1519 happened during db open, shutting down database
USER: terminating instance due to error 1519
Sun May 31 12:00:39 2009
Errors in file d:\oracle\product\10.1.0\admin\oracle5\bdump\oracle5_reco_3416.trc:
ORA-01519: error while processing file '' near line
CREATE DATABASE SCRIPT:-
create database ORACLE5
user sys identified by bala
user system identified by bala
logfile
group 1 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo01.log') SIZE 50M,
group 2 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo02.log') SIZE 50M,
group 3 ('D:\oracle\product\10.1.0\oradata\ORACLE5\logfile\redo03.log') SIZE 50M
maxlogfiles 5
maxlogmembers 5
maxloghistory 1
maxdatafiles 50
maxinstances 1
datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\system01.dbf' size 200m autoextend on maxsize unlimited extent management local
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
sysaux datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5\datafile\sysaux01.dbf' size 100m autoextend on maxsize unlimited
default temporary tablespace temp tempfile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\temp01.dbf' size 10m autoextend on maxsize unlimited
character set US7ASCII
NATIONAL CHARACTER SET AL16UTF16
INIT.ORA FILE:-
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Archive
log_archive_format=ARC%S_%R.%T
# Cache and I/O
db_block_size=8192
db_cache_size=25165824
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=oracle5
# Diagnostics and Statistics
background_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\bdump
core_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\cdump
user_dump_dest=D:\oracle\product\10.1.0\admin\oracle5\udump
# File Configuration
#db_create_file_dest=D:\oracle\product\10.1.0\oradata
db_recovery_file_dest=D:\oracle\product\10.1.0\flash_recovery_area
db_recovery_file_dest_size=2147483648
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.1.0.2.0
# Pools
java_pool_size=50331648
large_pool_size=8388608
shared_pool_size=83886080
# Processes and Sessions
processes=150
# Security and Auditing
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=oracle5XDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=25165824
sort_area_size=65536
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
control_files=("D:\ORACLE\PRODUCT\10.1.0\ORADATA\ORACLE5\CONTROLFILE\control01.CTL", "D:\ORACLE\PRODUCT\10.1.0\FLASH_RECOVERY_AREA\ORACLE5\CONTROLFILE\control02.CTL")

Hi,
undo tablespace UNDOTBS1 datafile 'D:\oracle\product\10.1.0\oradata\ORACLE5 \datafile\undotbs1.dbf' size 10m autoextend on maxsize unlimited
After ORACLE5 there is a space character. Typo? Create proper directory or delete this character.
Bartek

Problem with ora:parseEscapedXML

I have XML as string that contains & q u o t; (without space :( ).
Now I have to convert it to XML, I tried using ora:parseEscapedXML.
I have to process lot of XMLs that contains these encoded values, I tried adding escape character still it is not working.
It is throwing type error, which is not caught in Catch block and CatchAll block.
Atleast I need to Catch this exception.Can anybody suggest??
It seems like it is bug in ora:parseEscapedXML.
has anybody tried this
thanks and regards
V Kumar
Message was edited by:
user640551
Message was edited by:
user640551
Message was edited by:
user640551

Replace the "&" with "& amp;amp;" (no space in real situation as the browser will replace it back
to "&").You can use a Java exec in the BPEL code to implement this workaround.
java.lang.String temp = (String) getVariableData("dummy");
System.out.println("String before manipulation: " + temp);
temp = temp.replaceAll("&", "& a m p; a m p"); <-- Intentionally spaces
System.out.println("String after manipulation: " + temp);
setVariableData("dummy", temp);

Problem with ORA-06502 when exp/imp between two identical versions

Hi
I have two identical systems, one system that I develop on and
the test system. The two systems have the same version of the
Portal. When I export and then import the application from the
systems I get a error message on the test system.
ORA-06502: PL/SQL: numeric or value error: character to number
conversion error (WWV-11230)
This error does not appear on the developing system.
The application I have is a form on a table, and I have some
buttons with PL/SQL handels on them. I tried to remove this code
and export with no luck.
Please help.
The system:
Windows NT
Oracle Portal 3.0.8.9.8
Thanks
Jvrgen Swensen

Could you pls confirm : Have you exported & Imported the shared
components used by that form?
If you are not too worried about the templates/fonts then try
this:
Click on "Edit" link against that form and click "OK".
Thanx,
Chetan.

Problem with ORA-16014

Hi
Please help me
when I log in to the database then i got "ORA-16014: log 1 sequence# 79239 not archived, no available destinations" . I'm using Windows 2000 advanced server as O.S. and Oracle is 8i ( Oracle8i Enterprise edition release 8.1.7.0.0.). At this circumstances I give a command ( when the aforesaid error occures) " alter database clear unarchived logfile group 1;" after that the database get started successfully. But the problem is, within 1/2 hour i got "ORA-00257". Then again I stop and restart the database and again give the same command; database started successfully again but for 1/2 hours . again i got "ORA-00257".
Please suggest me what I have to do.
Regards,
Debasis
+91 9836033924

ORA 257 means archiver is stuck. So you should check that ARCHIVE_LOG_DEST is used properly for archiving and you should look into archiver trace file for more information about this problem.
Giving phone numbers on a public forum is not advised.
Adith

Problem with ORA-15063

Similar Messages

Maybe you are looking for