Problem with photo services

I can,t get onto apple photo services. Got photo book back yesterday with one photo that had super imposed over another.
The original photo on my end was fine with no warning signs. All other photos and text was fine.
Other old photos were fine no probs.
How can I ensure this does not happen again when I have the same book reprinted.

Go to https://expresslane.apple.com/GetproductgroupList.action. Select Apps & Software > Mac Apps > iLife for Mac > Photo Services and go on from there. Apple has been very good about working with customers with book printing problems.
Best of luck.

Similar Messages

Problems with Target service agreement

Problems with Target service agreement to repair my ipod nano. I have gone to the BBB. Who can I contact at Apple to let them know the poor service that Target gave with a Apple product?

Apple Customer Relations (800) 767-2775

Hi I have had problems with photo's and films going onto a 2010 Apple classic MP3. Have managed to sort photos but it still refuses to copy the films purchased. It comes up with not copied cannot be played on this ipod.

Hi have had problems with photo's and films going onto a 2010 Apple Classic mp3. Have managed to sort photo's but the films won't copy and comes up with message videos not copied cannot be played on this ipod

razzbust wrote:
...but the films won't copy and comes up with message videos not copied cannot be played on this ipod
Self explanatory.
You could try creating an iPod version of the films.
Use CTRL and B to display the Menu bar shown above. Alternatively, use the ALT key, followed by the F key, the W key and finally the I (eye) key - that's (menu)/File/Create New Version/Create iPod or iPhone version.

Problems with Photos and Fonts and Explorer

I am having problems with photos and fonts when my site is viewed on Explorer. The site is Ostyn-Newman.com The problems can both be seen on the start page -though they happen throughout the site. The photo is supposed to be only 30% opaque and it shows fine on Firefox or Safari, but Explorer viewers get the photo being used as wallpaper at 100% and this steps all over the text. Should I give up a using a photo as wallapaper?
Also the font I am using for "Ostyn-Newman Objects for Fine Homes" shows well in Firefox and Safari, but looks really bad on Explorer products. Should I just change the font? I am currently using Snell Roundhand.

See Roddy's posts in these topics:
Re: VIEWING iWEB SITES ON A PC ?
Re: iweb pages memory intensive
Re: iweb site on my personal domain name locks up
The message in each is pretty much the same but he does give some info of an application that can optimize the web pages to make them more readily readable by IE.
OT

Final Cut Pro 6.0.3 Problem with Photo JPG Codec ?

Hi everyone...
I have been working with music videos for several years using FCP 5.x and photo-jpeg codec, everything works fine. As time going by now I have updated my FCP using 6.0.3 with hopes to get better features. But unfortunately FCP 6 has problem with photo-jpeg codec. The problem is when I load a photo-jpeg video, the gamma will changes every time the playback head is start or stop. And I can't using video transition (standard cross-dissolve) anymore because the video gamma also change at the in transition and out transition. It also appear in my video monitor and output file ! I have searching all day to find out what is exactly the problem, but never get the solution. Should i come back to FCP 5.x ? Is it a BUGS or what ? What happen with Apple, why they let this happened ?
For information the video is in SD PAL & captured using Blackmagic Decklink card.
Please help,...Thanks.

Welcome to the discussions...
I believe this has to do with using YUV or RGB as the rendering method. RT is always RGB, but try changing the setting for your timeline to whatever it is not now...
post back,
Patrick

I bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

i bought a iphone 3gs 4 months ago had a problem with display service centre replaced me with the phone when i checked the settings of the phone in cellular usage under call time the lifetime usage was 3 days and 18 hours.what sholud be done ?

How is your iPhone's display different?
You can check the model number by going to Settings/General/About. These are the model numbers for the various 3 GS models;
MB715LL/A (16 GB Black), MB716LL/A (16 GB White), MB717LL/A (32 GB Black), MB718LL/A (32 GB White), MC555LL/A (8GB)

I bought a new iphone 4s and I have a problem with the service. How can it be solved? the SIM card is new and was working perfect withe iPhone 4G

I bought a new iphone 4s and I have a problem with the service. How can it be solved? the SIM card is new and was working perfect withe iPhone 4G

Under the answer you want to mark as correct you should see a box that says Correct with a green symbol to the left and a box with Helpful with an orange star to the left. Click on the one you want.
And thanks for thinking about that, it is appreciated.

Problem with Photo Booth backdrops

In addition to the problem of the first page effects constantly cycling, I now discovered a serious problem when trying to use backdrops. After I select the backdrop I want to use, it will appear in the main window, but it will not place my picture in the backdrop. In addition, it will merely flash the "please step out of the frame" message for a split second and then immediately say "backdrop detected." When I then snap the photo, all I get is the backdrop. I have deleted the .plist file, but that did not help. I had previously uninstalled and reinstalled the application, but the problem persists. Has anyone else experienced this problem, and, if so, have you found a solution?

I thought this issue had died and passed into oblivion. Either no one has an answer, or no one gives a ****,or both. Certainly not Apple. I seem to remember sending feedback to Apple long ago, but I never received a response. I just went to the feedback page and there isn't even a Photo Booth app. showing through which to submit feedback. Checking some of the other threads on this issue, it appears that this problem with Photo Booth has existed for quite some time, and there was a problem with placing iChat backdrops too. It seems that this app. is such a piece of crap that Apple will no longer support it. I can't understand why they continue to include it as part of the OS.
For what it is worth: I was recently at the Apple store and out of curiosity tried the app. on a MacBook Air. It (the app.) was so unstable that I didn't even bother to try to set a backdrop. I've lived without Photo Booth until now, so I guess I can continue to exist without it.
By the way: I didn't insert the asterisks. I typed d a m n, and the system inserted the ****. Interesting.

Problems with Customer Service AND unexplained charges!

I've been with Verizon for I-don't-know-how-many years, and through the years you are bound to have a few problems here and there but some of the problems are just ridiculous! It's also the same reocurring problem!!!!!!!!!!!!!!!! I was with Alltel first, before it was bought out by Verizon. The years I was with Alltel, I didn't have near as many problems. It seems EVERY time I do the smallest change or something to my phone or bill, I get a ridiculous amount of charges that I was NOT aware of, nor told about... EVEN IF I ask "So this isn't going to change my bill, or there will not be any unexpected/unexplained charges that I don't know about?"... BUT not matter how many times I ask... and NO matter how many times I am told "no"... there always is. For example.... last year, I updated and signed a new 2 year contract and purchased the first Driod. Before, my 30 day warranty was up, I was having problems with my Driod, and decided to send it in and get a new one. Before I did this.. I called customer service to make sure there would be no interuption in my bill, and there wouldn't be any unexpect charges, and there would be no difference in anything. I was told there was not, and once I recieved my new phone, just send it in and nothing would be changed. Of course, when I get my bill.. I see I was charged $500 for the new phone. It was explained to me that my credit card was reimbursed (which I never check that card, because I never used it expect to purchase the phone) and that I was recharged for the new phone, since it was a new phone. So I had to fork out the $500 (on top of my bill) and then wait months to get the $100 rebate card. Months after that, I "assumed liablity of my line" because I was on a plan with my family. I decided to have my own line, so I "assumed liability." I was not told that when I did that, I "renewed" my contract date. So I just added 6 more months to my 2 year contract. Was NOT told about that! Then again...... I was recently having problems with my Driod (the screen went black and would not come back on.) I had to turn on an OLD motorola razor, so I would not be without a phone for two days while I was waiting on my phone to come in. As soon as my phone came in, I had my Droid turned back on. I recieved my bill recently, and my bill was $200 over what it normally should be.... so I called in... apparently, when I had my phone replaced, they dropped off my data package and when I recieved my replacement driod, they never put it back on. So I was being charged for alllll my data usage... again I was NOT told about this. I wasn't even aware that they had dropped off my data package, and when/where did they get the authority to do that??? These are just a FEW of the problems that I have had.................................
Does anyone have these reoccuring problems!?

I understand that my bill can be viewed online, and I do view it fairly regularly, so if there are any unexplained charges, I can call Verizon asap. The problem does not come from me not understanding my bill, but from customer service. I have been with Verizon for a very long time, and it is a continuing problem. Where did Verizon get the 'OK' to drop my data package off my plan? Who authorized that?
After calling Verizon and trying to find out the problem, the gentleman told me that when I activated on old phone while I was waiting on my new Droid to arrive, my data package was dropped off and I "should" have been told about that. When I reactiviated my new Droid, I "should" have called and had them restart my data package. I was not aware that when you activate an old phone that data plan is taken off your plan. In all my years of having cell phones, I never make two years with one phone. I have always, at one point, had to turn on an old phone, and my data package has NEVER changed. Why would I have my data package dropped and why would I have to call Verizon to have it restarted. I would never know to do that unless I was TOLD that my data packaged HAD to be re-added when I recieved my new phone, but I was never told of that.
All of that is beside the point, the point is, Verizon was never given the authorization to change my plan. Never. My bill was taken care of and readjusted, and I am thankful for that. It does not change the fact it is always a hassle with Verizon Customer Service and I am always the one having to PROVE that I am not at fault, or that I was NEVER told of certian things. EVERY TIME I HAVE CALLED CUSTOMER SERVICE, I AM TOLD "I'M SORRY, THEY SHOULD HAVE TOLD YOU THAT."
"they should" does not help my bill with the extra armount of charges.

Problem with photos on dvd output

Not sure where the kink is in my process, exactly, but maybe someone will have run into this before...
i'm working with hi-res photos in my FCP sequences mixed with HDV video. I've been using the motion tab to resize and everything looks fine in final cut. When i use compressor to output the m2v file using the standard dvd presets, some of the stills have problems on the resulting file. not all of them look bad and it doesn't seem to be discriminating based on resolution of the original image file. I'm sure there's a good explanation, but the photos that get messed up seem to be random. some look great.
In the .m2v file played directly off of QT, they sort of just look darker, like perhaps they are interlaced strangely or something and the even or odd rows are black. but when i use that file to burn a dvd in dvd studio pro, the resulting image looks crazy messed up. Anyone know how to wrangle this one? Thanks

In case someone else runs into this problem, i did some extensive chatting with a final cut guru guy and all we could figure out is that i'm experiencing some sort of bug. that it shouldn't have been doing what it was doing. It started happening after my boss upgraded all of the studio software and quicktime to the latest versions. upon closer inspection, what was happening is that some of my photos were missing fields when exported as a qt, some weird byproduct of interlacing. we tried the settings all sorts of different ways and the problem did, indeed, go away when i changed the sequence to progressive, but i didn't want to sacrifice resolution of the rest of the footage just because of the problem with the few photos that were janky, so i found two workarounds that fixed the problem...
1) using the de-interlace effect on just the photos that were giving me problems. it lowered the resolution, but not enough to make a difference and it looked good.
2) using the motion blur effect. This filled in the missing fields and i did it at such an unnoticeable setting that it might have even looked better than the pictures i de-interlaced.
If this jogs someone's brain as to what the actual problem was in the first place and you think it's not just a bug in the system, then i'd be interested to hear how to avoid the problem in the future.

Problem with photos' colors

Hi,
I have a problem with colors of photos which I'm using in a. InDesign document.
I've created a 20 page catalog, with first and last pages for the front and back of the cover. I placed one photo on the first page and second on the last page. When I opened them earlier on in Photoshop they were matching perfectly, so I figured that it will be the same in InDesign. When I placed them in Indesign it turned out that the photo on the first page has a different color saturation (lower) than the one on the last page. It looks as if the first page was converted to CMYK and the last page was still in RGB mode (the photos were initially in RGB).
I decided to change the color preferences of the photos in photoshop to CMYK and saved thm again for InDesign, but it didn't help (I also checked all of the doc and color preferences in InDesign and all looked fine). It seems that colors are different on the last page only. Is it possible that it has a different color preferences set up? I'm a new InDesign user and I would be gratefull for You help :-)

It sounds like you have transparency of some sort (effects, drop shadow, tranparent image?) on the front and not on the back, and that the transparency blend space is set to CMYK instead of RGB while your image is RGB.
Edit > Transparency Blend Space > Document RGB

Problem with Photos in Camera Roll after 4.0.1

Hello,
I have a 16GB iPhone 3G.
I updated to iOS4.0 the day it came out, and other than the slowness that everyone else was reporting, I didn't have any other issues.
When I updated to 4.0.1, everything seems a touch better performance wise, but I found a problem with my camera roll.
First, when I opened the Photos App, there was no thumbnail for Camera Roll (all others were ok).
I opened the camera roll, and the last 50 or so pics that I had taken, were all showing as one big Black blob (not individual black thumbnails, they were all joined)
If I scrolled up to older pictures, the older ones were fine.
I took a new picture to test it, and that one looks fine.
So now I can see all my OLD pictures, and any NEW pictures I take, but those same 50 pictures were still showing as one big BLACK blob.
I can still access the pictures if I touch them, and I can flip through them without any problems. I can also copy these photos from my phone to my PC, so the pictures themselves seem to be fine.
And after copying them to my PC, what I noticed by examining the timestamps, was that the problematic pictures were all taken after I updated to iOS 4.0. It seems that all pictures from 3.1.3 or earlier are showing fine, and now all pictures taken with 4.0.1 are showing fine as well. So only pictures taken with 4.0 seem to be affected.
Is there anything I can do to fix this?
(Just for the record, my phone is not and has never been jailbroken.)

There is a solution!!
After installing iOS4.0.1 update on my 3G, I too had the black
blob in my camera roll. As posted in an earlier thread, here's
one way to resolve this problem. It worked for me!
Just email the photos that don't appear in the camera roll to myself,
delete the offending photos and then re-save them from the email.
A bit of a pain but it's a way around it. Good luck!
ErikV

Adobe Bridge CC -- ongoing problems with Photo Downloader (scrolling, crashing, etc)

Hello Community,
Thanks in advance for any suggestions to improve my Bridge CC experience! I have recurring problems, esp. when using the Photo Downloader (in other words, daily problems) -- scrolling either up or down to select photos is a nightmare, as the scrolling either jumps or stops without rhyme or reason, making the photo selection process tedious and maddening. Additionally, if I spend more than a few minutes selecting which photos to load to my computer (i.e., from iPhone), Bridge crashes.
I have been using Bridge for about a decade, and never EVER had a single problem with it until CC. I have a 2013 MacBook Pro, all software updated, etc. No fancy bells or whistles, no peripherals, etc... Just trying to get my pictures from phone and tablet to the computer.
Many thanks.

Moving discussion to Bridge forum.

Problem with web service that returns an object with a String that have som

Hi everybody:
I have a problem with a web service I am doing, I have made a web service that returns a collection of objects, the objects have a set of properties, there is one property that is a String,this property consists in a text fragment that could have some characters that are considered special in XML like &, <, >, " and that's why when I execute the service from a client an exception is thrown:
{code}
Exception in thread "main" org.codehaus.xfire.XFireRuntimeException: Could not invoke service.. Nested exception is org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
org.codehaus.xfire.fault.XFireFault: Could not read XML stream.. Nested exception is com.ctc.wstx.exc.WstxParsingException: Expected a text token, got START_ELEMENT.
at [row,col {unknown-source}]: [9,646]
at org.codehaus.xfire.fault.XFireFault.createFault(XFireFault.java:89)
at org.codehaus.xfire.client.Client.onReceive(Client.java:410)
at org.codehaus.xfire.transport.http.HttpChannel.sendViaClient(HttpChannel.java:139)
at org.codehaus.xfire.transport.http.HttpChannel.send(HttpChannel.java:48)
at org.codehaus.xfire.handler.OutMessageSender.invoke(OutMessageSender.java:26)
at org.codehaus.xfire.handler.HandlerPipeline.invoke(HandlerPipeline.java:131)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:79)
at org.codehaus.xfire.client.Invocation.invoke(Invocation.java:114)
at org.codehaus.xfire.client.Client.invoke(Client.java:336)
at org.codehaus.xfire.client.XFireProxy.handleRequest(XFireProxy.java:77)
at org.codehaus.xfire.client.XFireProxy.invoke(XFireProxy.java:57)
at $Proxy0.search(Unknown Source)
at cu.co.cenatav.webservices.client.Client.main(Client.java:26)
{code}
I know that this is happening because special characters are sent by the soap message but I don't know how to solve this problem.
How could I avoid this exception ?
I hope you can help me.
Regards.
Ariel

Hi,
BPEL and BPEL PM do not have a good support for SOAPENC-Array: it would be very difficult to create such an array in BPEL or to receive it and manipulate it.
The (unfortunately very intrusive) work around is to change the WSDL of the service to use a XML type defined using XML schema. This is all the more painful that JDev 9.0.4 does not have strong support for complex types.
In general though, I would highly recommend this best practice:
1) Start by define the WSDL contract first
2) Then generate the server side skeleton to implement it
3) Use BPEL as the client to this contract.
By starting with the contract first, you make sure that 1) your interfaces are clean and coarse grained.
2) things like java objects, sessions, etc to not leak through the interface (which would be the worst thing that could happen because it would closely link the client and the server.
Sorry for not being more helpful. This will get radically cleaner in Oracle AS 10.1.3.
Edwin

Problem with Photo Booth (NOT CRASHING)

So I updated to 10.6.2 which THANKFULLY solved the Photo Booth crashing problem... However, some effects are producing an inverted color image
Here is it what I mean:
How it's supposed to look (captured by screen shot): http://img148.imagevenue.com/img.php?image=63601Screen_shot_2009-11-12_at_4.55_122576lo.jpg
How it is being saved: http://img127.imagevenue.com/img.php?image=63605Photo_on_2009-11-12_at_16_122409lo.jpg
Any help would be GREATLY appreciated

I don't know the correct place to post this issue, but I do know that I have the same issue on my iMac with Snow Leopard. I actually have a problem with the effects page that has the cube, the clown, the cowboy, etc. All these effects save the photo wrong. The colors are off and grainy.

Problem with photo services

Similar Messages

Maybe you are looking for