Problem with PIN alerts in holster

After upgrading to OS 5.0 on US Cellular (same as Sprint OS 5.0), my profiles seemed to be "Fixed" from OS 4.7 problems.  However I have come to realize I don't get alerts in holster for PIN messages now.  Every other alert works great.  Vibrate or sound so work out of holster.  I phoned tech support who said the in holster alert issues are "known" for the Tour.  If so, when may there be a RIM fix? 

Do you have an endpoint for the service. To enable endpoint monitoring, go to the
dashboard page for the associated resource and edit the
Endpoints setting in the
monitoring section, see figure 1. If you have an endpoint, try disabling and enabling the alert in the management tab.
figure 1.
Johnny Coleman [MSFT] Any code posted to this Forum is [As-Is] With No Warranties

Similar Messages

  • Problems with email alerts in OEM ( 10g )

    Gurus,
    I have setup the notification for the listener availability and I am having problems with getting the emails when the listener is down. I manually tested the setup by stopping the listener from the command prompt on the server and I don't see any email alerts, but the email alerts come after the listener is started back again from the prompt. I am interested in seeing the alerts when the listener goes down, any info on this is appreciated.
    Thanks.

    Thanks for your response. I have selected "yes" for both Up and down in your alert setup and still no luck. I did check the field where it says about sending email. Again when I stopped the listener alert didn't fired up, but it fired up after starting the listener.

  • Why my N900 has a problem with beeps/alert sounds!...

    I have a weird problem with my N900 and the alert sounds.
    They seem to stutter or not sound smoothly as if something is slowing them.
    It happens on message alerts, email, sms and camera shutter etc.
    Difficult to describe. I am not technical but it almost seems like it can't keep up maybe the CPU or memory???
    Had the problem before and after PR1.2..
    Also noticed stutter/pausing on media player as per this clip below from another user.
    http://www.youtube.com/watch?v=IKd7Gko2dak
    Searched discussion and can't see a topic but have read someone else mentioning something similar once.

    You may have to see about exchanging that MacBook/Pro for another before time runs out, and hope the replacement does not have this issue; and if you have access to an Apple Store with Genius, you may be able to get an appointment to discuss this issue and the exchange prospect, if it comes to that before 14 days from purchase date go by.
    I've looked a little and seen a few different problems with some of the hardware you have, but not the same issue with the green color, etc. Do you have a different external display device to see if the color is due to the internal graphics hardware in the MacBookPro retina?
    Hopefully you can get an answer in this matter.
    Good luck & happy computing!

  • Simple problem with an alert

    I want to show an alert, then when it times out, display a menu of choices (the "main menu").
    Problem is, the alert never displays; the menu immediately pops up so they never get a chance to see the alert message.
    How do I get the alert to wait it's timeout period before continuing on to the next block of code?
    Here's a fragment:
    Alert altOk = new Alert("Save","New settings saved.",null,AlertType.INFO);
    altOk.setTimeout(3500);
    display.setCurrent(altOk);
    showMainMenu();
    Thanks in advance for any help!

    Yap...that's because you encapsulate the display.setCurrent(menu) in the showMain() function.
    In fact, I encapsulate both setCurrent(new Alert(the correct parameters)) in the showAlert function. In doesn't make sense in the way you should show the alert after main but that's the way it is. IF someone out there know the reason, I would like to know as well...But my guess is because the Alert is subclass of Screen which is more lighter that Displayable object....so you have to put the Displayable initially. Tha analogy is the same as when you use the Swing libraries. IF you want to add menubar, you have to put the menubar on the frame then show the frame at the end(hence, Frame is heavier than menubar)....
    Hope you'd tested the code.....
    cheers....

  • Problems with the alerts

    Hi to all.
    I have this problem:
    I need to know If exists any way, for don't close the alert with the "X", locate in the upper rigth corner.
    If I close the alert with this th application runs wrong.
    The application runs in a web.
    I anybody have any solution, say me that.
    Thanx in advance

    Oscar,
    There is no property to disable the "X" window close button. But you can write a piece of code to force the user to select one of the buttons in the alert. The example
    below assumes that the alert has two buttons.
    Declare
    alert_rtn number;
    Begin
    loop
    alert_rtn := Show_alert('ALERT_XXX');
    if (alert_rtn = ALERT_BUTTON1 or
    alert_rtn = ALERT_BUTTON2) then
    exit;
    end if;
    end loop;
    End;
    This piece of code will show the alert always until one of the buttons is chosen. This is kind of a workaround. Hope this helps.
    null

  • Problem with PC Alert

    I have MSI BX Master motherboard and under
    Win 98 PA Alert worked just fine but now under WIN XP professional this program is not working I got massage
    that there is not hardware monitoring chipset present
    on my board.I downloaded the last version of program and he is stil not working.

    I don't run any of 'those' monitoring programs. I find that they use resources and by the time you are alerted to a problem it generally is too late.
    If I remember correctly (from the 'old' forum) PC Alert does not work with XP, not the 'new' version, not the 'old' version.
    Hopefully someone will pass by with a bit more info.......

  • Strange problem with AAM, Alerts, and custom app

    Hello
    We have a custom app written by an outside vendor. There is a function of the app called merge that basically takes a template in a document library and is supposed to make a copy for editing. The function only works if the Default AAM is the internal server
    name http://server1. However the alerts email links show the same thing so they do not work from outside of the network. If the default AAM is changed to the Internet URL http://sharepoint.domain.com the merge fails with error "error is The remote server
    returned an error: (401) Unauthorized., url is http://sharepoint.domain.com/prm/Document Library/Templates/Test co.docx." And the alerts are correct. 
    Of course the vendor says it is not their issue. Anyone able to give me some ideas? Can the Alert Template be changed to come from other than the default AAM value?
    Thanks

    the error ("401 unauthorized") is likely due to a LoopbackCheck.
    You cannot change the email message, alerts always use default AAM.
    Scott Brickey
    MCTS, MCPD, MCITP
    www.sbrickey.com
    Strategic Data Systems - for all your SharePoint needs

  • A problem with email alerts in management services of Azure portal

    Hi,
    I have created an alert with email notification on a custom performance counter using the management services of Azure portal.
    Currently the alert is in active state (and has been so for several hours), but i haven't received any email.
    Can someone please advise on this issue?
    Thanks,
    Roi

    Do you have an endpoint for the service. To enable endpoint monitoring, go to the
    dashboard page for the associated resource and edit the
    Endpoints setting in the
    monitoring section, see figure 1. If you have an endpoint, try disabling and enabling the alert in the management tab.
    figure 1.
    Johnny Coleman [MSFT] Any code posted to this Forum is [As-Is] With No Warranties

  • New blackberry​, problem with pin.

    admin.
    please check my pin and imei.
    25754313
    358264.01.869114.6
    I just bought a blackberry, but can not activate the blackberry internet service. please check.
    thanks.
    admin.
    please check my pin and imei.
    25754313358264.01.869114.6
    I just bought a blackberry, but can not activate the blackberry internet service. please check.
    thanks.

    There is nothing we can do with your pin or imei
    There is nothing we can do with your pin or imei
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • The real problem with Mail alerts in 10.5?

    The one change I have noticed between Mail in 10.4 and Mail in 10.5 is that the New Mail Alert sound now plays through the wrong device.
    In System Preferences you can set two separate devices (and volumes levels) for Alert Sounds and other sounds.
    The new Mail sends the New Mail Alert sound to the ordinary sound output device. If this is set to volume zero the effect is that Alerts from other programs work normally but Mail is mute.
    I have Alert Sounds set to play through the built-in speakers and Sound Output set to play (through an iMic USB sound device) to a sound system. The sound system is used to listen to music etc. and is switched off when not in use. That is why I want alerts to use the built-in speakers.
    I am trying to get round this using the hack involving afplay. My problem is that I can't find the allowable values for the AUDIODEVICENAME argument to afplay. Anybody know? Please? Has some kind soul got five minutes to spare and Inside The Mac?

    The problem still exists in 10.5.8.

  • Problems with Alarm/Alert (app MicrosSalat)

    A few days ago my Nokia Lumia 820 had some issues that ranged from apps closing abbruptly, frozen screen, frozen app (once i opened the app, the phone would freeze and the calibration for the touch screen suddenly wasn't working right) and when I got a call the screen would freeze and I would be unanble to answer the phone.
    Because of that, I switched off my phone and then took out the battery and waited a few minutes before putting the battery back in and starting up my phone. Everything seemed to be working except the alerts for the app Microsalat. This is an app that lets me know when the time comes to pray. The alerts should only be one, but two alerts would go off in tandem. I had even uninstalled the app and the alerts still go off (though without the alarm sounding, it would just pop up at the time of prayer). The app worked fine before this issue happened and there wasn't an update issued for the app (but i did update other apps prior to the original issues the phone had faced).
    Is there a way to fix this double alert/alarm problem?

    Thanks!!! Worked a charm!
    I tried restoring before but never as a new phone!
    Cheers man!! Much appreciated!

  • Problem with javascript:alert(document.lastModified)

    After I upgraded to Firefox 6.0.1 and now today to 6.0.2, I'm unable to get any response to my using javascript:alert(document.lastModified)
    in order to get a web page date.

    A lot of websites are generated dynamically by a script (e.g. PHP or other server side script) that runs on the server and in that case you will always see the current date.

  • Problem with pin reference (USB 6218)

    Hi evryone,
    I am confused concerning the pin references for USB-6218. MAX says to use  pin 15 and 16  for a differential AI (AI0/AIground) on the first channel. This seems correct because my measure looks ok. But when I look at the data sheet (http://www.ni.com/pdf/manuals/372085b.pdf)  these pins correspond to PFI 6/P1.2 and D ground.  The AOs don't match either.
    I must be making a mistake when reading the data sheet. Would anybody know what I am doing wrong?
    Thanks,
    User 
    Solved!
    Go to Solution.
    Attachments:
    Forum.PNG ‏56 KB

    Hi User_1979,
    Did you use a simulate device in MAX?
    These Connections refers to this datasheet of the USB 6218 (P.15). Your measurement seems ok between pin 15-16 (AI0-8), the behaviour is normal.
    Also you can find the device pinout within MAX by right click on the device and click to view the pinout.
    Regards,
    Rémi D.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Les rencontres techniques de NI - Mesures et acquisition de données : de la théorie à la mise en ...

  • Problem with Message Alert

    I get an alert for a new message, but show no new messages.  How do disable the notification or find the new message?P

    Check the text message app settings and turn off Alert Reminder.

  • Im having problem with my whatsapp keep showing connect to itunes to use push notification

    i dont know why after downloading iso7 my facebook,whatsapps having problem with no alerts and asking me to connect to itunes use push notifcation

    you have to log in to your account on the computer iTunes and edit your payment information there.
    iTunes Store: Changing Account Information
    http://support.apple.com/kb/HT1918

Maybe you are looking for