Problem with pixelation when creating a pdf

Hi,
A client sent me an InDesign file and a PDF of what that file made. I was asked to make some text edits. I finish and export to pdf. When viewing my new pdf at 100% the images are pixelated really bad. The original pdf they are high quality images at 100%. I didn't mess with the images at all. I don't know what I am doing wrong.
Any help would be appreciated.
Extra info
ID CS6
Images are jpegs
High quality prin settings
Compress jpegs (maximum quality)
Do not downsample

InDesign creates low resolution previews of placed graphics (to enable quicker screen draws).
When you opened the file you should have been alerted that the document contained missing links.
During the work time on the file, the links panel would have shown similair to
InDesign probably also alerted when you exported to pdf.
If you have instructed InDesign to disable warnings, you should consider turning them back on from the Preferences panel
Edit > Preferences > General

Similar Messages

Problem with colors when print to pdf in FM9

Hi,
we have some problems with printing colors to pdf with FM9.
The FM document contains (1) eps file with a green box and (2) a rectangle created with FM graphic tools, filled with the same green color values (91/0/60/44)
In FrameMaker the two colors really looks different, but so what, in the PDF both colors (eps) and rectangle got the same correct green color.
Ok, the were different in creation, so they were CMYK and RGB, but your print shop could manage that.
Now in FM 9:
(1) If I do a "save as PDF" and switch OFF "convert CMYK to RGB" the resulting PDF is the same as from FM8 (correct)
(2) If I print to PDF via distiller and define the job options to "convert all colors to CMYK" the resulting rectangle green is very different from the eps green.
I tried different job options, the best result was "convert all colors to CMYK", other options just very more ugly.
Does someone of you know a solution for your problem? Help is very appreciated. I could send example files if necessary.
Thanks in advance.
PK

PK-ulm wrote:
But we want to use the print option, using the distiller.
Pia,
this last sentence needs some explanation, I think. Why do you want to use the print option?
Using the print option, you still go the same route as FrameMaker Win always did, which is using the RGB-only Windows postscript driver. Now, with FM9, you have the option to get CMYK colors directly to PDF, as defined, without any color conversion. And it *does* work, as long as you restrict your documents to either CMYK colors or spot colors coming from the FM libraries.
So, again: why do you want to use the print option?
On a sidenote: I'm not sure if I interpret your username correctly, but if you are able to understand German, you'll find some in-depth color tests made with FM9 here: http://www.hilfdirselbst.ch/foren/FM_9_und_Farben_in_PDFs____getestet_P387800.html
Bernd

Problems with encoding when creating link in mail

A user inputs some text in a field at a webpage.
From this I build a mail that has a link that looks like this:
http://www.domain.com/a/controller/action/?name=[INPUT VALUE]
My problem is that when I try to get the value in the receiving action, using params.name, it does not so good. The real problem is about odd characters like our swedish �,�,� for example.
What I have tried to do when building the link is to use URLEncoder.encode([INPUT VALUE], 'UTF-8') and then using URLDecoder.decode(params.name, 'UTF-8') but it does not work at all. Is there any other way I should attack this problem?

def name = "Mattias Sands�ter";
def email = params.email;
name = URLEncoder.encode(name, 'UTF-8');
println(name)
def message = http://domain.com/a/b/download/?name=" + name
MailSender.sendMail(email, "Subject", message);{code}
{code}def download = {
println(params.name)
println("download after decode" + URLDecoder.decode(params.name, 'UTF-8')){code}
The first println looks fine, it says Mattias+Sands%C3%A4er
The second println looks horrible, Mattias Sands��ter
The third looks the same.
Then I send this to my gsp(jsp) page and wants to put this in a standard textfield, but it of course looks like Mattias Sands��ter there too.
This is on a linux-server, on my local computer, everything works as expected.
Whatever it its, something happens to the name-variable when it is clicked on in the e-mail. It looks good in the e-mail, get pasted in the address-field in the browser correctly, but when retreiving the variable with params.name it is screwed
Edited by: sandsater on Jul 8, 2008 8:44 AM

Problem with FQDN when creating Web Dynpro App

Hi @ all,
when create a WDA the url is set like this: HTTP://SAPVM1:8000/sap/bc/webdynpro/sap/z_wda_sample.
I defined the icm/host_name_full and the SAPLOCALHOSTFULL correct*, but it did not work. I have also restarted the system more than one time. I searched a lot, but found no solution here on sdn.
*correct means : sapvm1.mydomain.de
Even if I try to start a default wda example the wrong FQDN is set. But if I start the wda at the SICF (test service) it works, the FQDN is set right.
thx in advance.
Timo

Hi,
it seems that the httpurlloc table was the problem. The host entry in this table was no FQDN, I changed it into FQDN and it works. Now the generated url of the web dynpro applications is correct.
Maybe this helps somebody else.
See also
http://help.sap.com/saphelp_nw70/helpdata/en/42/d547ab30b6473ce10000000a114e5d/frameset.htm
Timo

Problems with superscript when exporting to PDF

If one writes in a table cell for example "100m3 tank" with 3 as a superscript, then exports the document to PDF, the
"3 tank" disappears, likewise if one just writes "100m3", the 3 disappears. However, if you just write "m3", the three in superscript remains. Any fixes for this bug? How can I report it to Apple?

I just came across this same problem -- similar but not exactly the same.
Text in a table does not print properly when text is superscripted.
This is a problem since we have a French invoice that has a fair bit of superscript. I tried to work around by decreasing the font size and increasing the baseline, but this did not work.
I'm using Pages 5.1 and Mavericks.
Anyone have any ideas????

Problem with dnsextd when creating Wide-Area-Bonjour

Hello,
I've been struggling for some time trying to create a WAB test environment but without success and would appreciate some help.
Im using a mac mini (later 2014) running Yosemite to run bind (9.10) and ISC for a testing zone with DDNS enabled. This setup is running perfectly with or without TSIG (both ways run perfectly).
When I try to include dnsextd in this setup for LLQ is where the problem start. No more DDNS updates. When I run dnsextd in debug mode, it shows the following message:
"Rejecting Update Request with 2 additions but no lease".
The dhcp logs report RCODE 5 (from dnsextd), which means REFUSED.
Any ideias?
I see a lot of website (including DNS-SD.org) with very simple cookbooks explaining how to create the WAB environment, but I cant make it work. Even if I configure the zone keys in dnsextd, it wont work. The error change to a new one (dnsextd responds without TSIG, which is not accepted by the DHCP server) and it wont work also.
Any idea of fix would be appreciated.

thanks for the quick reply AndrewTJ - I did notice the typo after posting and corrected however the problems remains. below is the contents of my up.com.dns file - i can see nothing out of place but cannot get a resolution
; Database file up.com.dns for up.com zone.
;      Zone version: 22
@                       IN SOA dns1.up.com. hostmaster.up.com. (
                         22           ; serial number
                         900          ; refresh
                         600          ; retry
                         86400        ; expire
                         3600       ) ; default TTL
; Zone NS records
@                       NS dns1.up.com.
; Zone records
_http._tcp.up.com.              PTR website._http._tcp.up.com.
website._http._tcp.up.com.      TXT ( "txt path=/" )
                         SRV 0 0 80 dns1.up.com.
_services._dns-sd._udp.up.com. PTR _http._tcp.up.com.
b._dns-sd._udp.up.com.          PTR @
lb._dns-sd._udp.up.com.         PTR @
dns1.up.com.                    A 192.168.1.153
Any ideas?

Problem with fonts when opening a pdf in Illustrator

Hi all! I'm working on a pdf. I do NOT have the original. So I've found it's easier to open the pages in Illustrator, make edits, and resave as a pdf. The problem is that Illustrator is converting some text to outlines. It is saying I don't have the font, but I do. In fact, on the same page I'll have 4 lines... and some will be converted to outlines and some won't... and they are all the same font. Is there a way to tell Illustrator to NOT convert the font to outlines? I don't mind if it uses a substitute font... it's easy to go in and change the font to the right font. But I don't want the text converted to outlines. Thanks.
Julie
PS I'm using CS 4 on a Mac.

Thanks, Scott. But I'm not sure what you mean by "pretty standard." Are you saying this is, in fact, default behavior in AI 14?
I'm still at AI 12 (CS2), and "standard" behavior (when the font is not available) is for Illustrator to do a font substitution, not automatically convert the type to outlines.
Is this, perhaps, what the new 'Missing Glyph Protection' does in AI 14 (as Myle suggested in post #1)?
If, in fact, this is the new default behavior, I would hope that Illustrator provides a warning (and an option to not proceed) given the highly destructive nature of converting type to outlines.

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
Any help please?
thanx

the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
try, on the end of that link, see if there's a space built into the page or the link when the page was made
On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

Help me, I have a problem with font when export report to PDF?

Hi everyone! Help me
I have a problem with font when export report to PDF
My report uses template .rtf with font Times New Roman (Unicode), language is VietNamese.
when desige template no problem, error only happen when view report by PDF.
Edited by: user10236405 on Oct 15, 2008 11:23 PM

give it time to boot. the time depends on yr memory size n data. soon a process bar will appear indicating the boot process. if still this doesnt work. try formating the phone. but this ways u lose all data on the phone (unless u backed it). relax! the data on the memory card is safe.

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

When creating a PDF from a PPT or Keynote application on a Mac using Acrobat X Pro, how do I ensure it can be opened on a PC? Do I need to save as a particular version of Acrobat?

The system was not my own, it was on a PC belonging to the school where I teach. The error message referred to Acrobat 9.0, so I assume that the problem is to do with the version on which the file was created being more recent than that on which I attempeted to open it.

When creating a PDF from the scanner, it only scans one side despite the settings.

When creating a PDF from the scanner, it only scans one side. I am using a fi-7160 that supports scanning both sides at once. The Scanner software is configured to scan both sides, and so are the presets in Adobe Acrobat Pro. I've only gotten the setting to work with the Custom Scan setting. Has anyone else had this problem, and what is the solution?
Additionally, the software bundled with the scanner with automatically omit the back sides of a page if it is blank. I am scanning large files with occasional double sided pages. Is there a way to avoid having to manually delete blank pages when creating a new PDF from the scanner? It takes twice as long because I'm using the OCR stabilization.

Hi anne,
Could you please let me know what Acrobat and OS version are you using.
Does this happen in case of any particular PDF or all PDF files?
Try repairing Acrobat and then again check.
Hope to get your response.
Regards,
Anubha

Oracle Text - Problem with filtering binary documents (.doc, .pdf, etc...)

Hi, I have a problem with filtering binary documents (.doc, .pdf, etc...). I use SQL*PLUS for remote access to Oracle 10.2 on Linux and I create table:
CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
I insert to this table:
INSERT into test values(1, 'PATH/text1.doc‘);
INSERT into test values(2,'PATH/text2.doc‘);
and then:
CREATE INDEX test_index ON test(text) indextype is ctxsys.context
parameters (’datastore ctxsys.file_datastore
filter ctxsys.auto_filter’);
Message "Index created" is displayed, but objects: DR$test_index$I, DR$test_index$K, DR$test_index$N, DR$test_index$R and DR$test_index$P are empty => index wasn´t created probably.
I don´t know, where is bug, either bug is somewhere in this code or on the server (wrong installation oracle or constraint privileges). Do you know in what is bug?

The following is an excerpt from the 10g online documentation. Note the items that I have put in bold.
"FILE_DATASTORE
The FILE_DATASTORE type is used for text stored in files accessed through the local file system.
Note:
FILE_DATASTORE may not work with certain types of remote mounted file systems.
FILE_DATASTORE has the following attribute(s):
Table 2-4 FILE_DATASTORE Attributes
Attribute Attribute Value
path path1:path2:pathn
path
Specify the full directory path name of the files stored externally in a file system. When you specify the full directory path as such, you need only include file names in your text column.
You can specify multiple paths for path, with each path separated by a colon (:) on UNIX and semicolon(;) on Windows. File names are stored in the text column in the text table.
If you do not specify a path for external files with this attribute, Oracle Text requires that the path be included in the file names stored in the text column.
PATH Attribute Limitations
The PATH attribute has the following limitations:
If you specify a PATH attribute, you can only use a simple filename in the indexed column. You cannot combine the PATH attribute with a path as part of the filename. If the files exist in multiple folders or directories, you must leave the PATH attribute unset, and include the full file name, with PATH, in the indexed column.
On Windows systems, the files must be located on a local drive. They cannot be on a remote drive, whether the remote drive is mapped to a local drive letter."
With accessible paths and files, you get something like:
SCOTT@orcl_11g> CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
Table created.
SCOTT@orcl_11g>
SCOTT@orcl_11g>
SCOTT@orcl_11g> INSERT into test values(1,'c:\oracle11g\banana.pdf');
1 row created.
SCOTT@orcl_11g> INSERT into test values(2,'c:\oracle11g\cranberry.pdf');
1 row created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> CREATE INDEX test_index ON test(text) indextype is ctxsys.context
2 parameters ('datastore ctxsys.file_datastore
3 filter ctxsys.auto_filter');
Index created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> select count(*) from dr$test_index$i
2 /
COUNT(*)
608
SCOTT@orcl_11g> In the following, I used a non-existent path and non-existent file name, which produces the same results as when you use a remote path that does not exist locally.
SCOTT@orcl_11g> CREATE TABLE test (id NUMBER PRIMARY KEY, text VARCHAR2(100));
Table created.
SCOTT@orcl_11g>
SCOTT@orcl_11g>
SCOTT@orcl_11g> INSERT into test values(3,'c:\nosuchpath\nosuchfile.pdf');
1 row created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> CREATE INDEX test_index ON test(text) indextype is ctxsys.context
2 parameters ('datastore ctxsys.file_datastore
3 filter ctxsys.auto_filter');
Index created.
SCOTT@orcl_11g>
SCOTT@orcl_11g> select count(*) from dr$test_index$i
2 /
COUNT(*)
0
SCOTT@orcl_11g>

Problems with navigation when deploy application on WebLogic 10.3

Hi! I have problems with navigation when I deploy my application on Weblogic server 10.3. In my application I have two pages. One page where I can see the records. In this page I have button Create with action to secound jspx page. When I press this button then the first form (where I could see all records) is empty - the create operation worked, but navigation to second page not. Navigation rules is in adf task flow. In default server all works correct. Where is the problem?
Maybe when I deploy my application I need specialy deploy adf task flow or somewhere write something? If so, then can you explain me where? Any suggestions what to do.
Best regards!

I have in log:
2009.26.3 20:12:52 oracle.adfinternal.controller.faces.lifecycle.JSFLifecycleImp
l setLifecycleContextBuilder
WARNING: ADFc: Replacing the ADF Page Lifecycle implementation with 'oracle.adfi
nternal.controller.application.model.JSFDataBindingLifecycleContextBuilder'.
2009.26.3 20:12:52 oracle.adfinternal.controller.util.model.AdfmInterface initia
lize
INFO: ADFc: BindingContext is present, using ADFm APIs for DataControlFrames.
2009.26.3 20:12:52 oracle.adfinternal.controller.metadata.provider.MdsMetadataRe
sourceProvider <init>
INFO: ADFc: Controller caching of MDS metadata resources ENABLED.
2009.26.3 20:12:52 oracle.adf.controller.internal.metadata.MetadataService$Boots
trap add
INFO: ADFc: Loading bootstrap metadata from '/WEB-INF/adfc-config.xml'.
2009.26.3 20:12:54 oracle.adf.share.security.providers.jps.CSFCredentialStore fe
tchCredential
WARNING: Unable to locate the credential for key AUGI in D:\bea\user_projects\do
mains\base_domain\config\oracle.
2009.26.3 20:12:54 oracle.adf.share.jndi.ReferenceStoreHelper throwPartialResult
Exception
WARNING: Incomplete connection information
Edited by: Debuger on Mar 26, 2009 11:18 AM

When creating a PDF in Acrobat Pro it seems to change my reference numbering system???

I am trying to create a PDF file using Acrobat Pro trial version (before I buy it I need to know if it works for me). The file I am using is a condensed version of a report so it has some of the tables/figures omitted and therefore the numbering sequence isn't sequential ie. it can jump from Figure 9-2 to 9-4. For some reason - when creating the PDF - the program is CHANGING the numbering system of the original file in the body of the document - but the Table of Contents keeps it how I had it. HELP??!!! How do I make it just create the PDF exactly how it is in the Word document file without automatically making any changes like that to it?!
I have tried several ways to create the PDF - in Word - I tried doing it as a Print command, also in Word I tried doing it from there, also I tried creating it from a file right in Acrobat Pro. I also tried "protecting" the document first - but this didn't work either.
Thank you so much to anyone who can help!

You might want to specify what kind of graphics are giving you problems.
Frame drawings or imported files? If imported, what file type? RGB or
CMYK? Any spot colors?
The best graphics are EPS because FrameMaker passes them around the
Windows GDI unchanged and EPS files can retain spot colors, too. Other
types of graphics get passed through Windows GDI and converted to RGB
where the result can sometimes be astounding. In Save as PDF, what's the
setting for "Convert CMYK colors to RGB?"
Check also "GetLibraryColorRGBFromCMYK=" in maker.ini and change it from
"Printing" to
"None". That seems to get the best results for having what you see on
screen match what ends up in the PDF.
There are also color management settings in your Distiller .joboptions
file that can affect the result. Usually, you want to set Settings>Edit
Adobe PDF Settings> Color> Color Management Policies to either "Leave
Color Unchanged" or "Tag only Images for Color Management."

A problem with copying text from english pdf to a word file

i have a problem with copying text from english pdf to a word file. the english text of pdf turns to be unknown signs when i copy them to word file .
i illustrated what i mean in the picture i attached . note that i have adobe acrobat reader 9 . so please help cause i need to copy text to translate it .

Is this an e-book? Does it allow for copying? It is possible that the pdf file is a scan of a book?

Problem with pixelation when creating a pdf

Similar Messages

Maybe you are looking for