Problem with posting using transaction FB01.

Hi ,
Does anybody have an idea how to get the screen no. 302
using transaction FB01?
Deatils are :-
SAP Transaction:     FB01
SAP Program Name:     SAPMF05A
SAP Screen Number:     302
anticipating a quisk answer,
vipul

On the first screen enter a posting key of 31 and a vendor account number.
rob

Similar Messages

Problems with posting iDocs from MDM in SAP R3

Hi,
I am an MDM consultant, with limited knowledge about SAP R3.
We send material master data from MDM, via PI to R3 using iDocs.
We are having problems with posting MATMAS, and it seems the problems are with updating already existing materials.
In BD87 we get the following warnings:
The field MARA-ERVOE is not ready for input and was therefore not initialized
The field MARA-ERVOL is not ready for input and was therefore not initialized
The field MARA-FERTH is not ready for input and was therefore not initialized
The field MARA-KZGVH is not ready for input and was therefore not initialized
The field MARA-XCHPF is not ready for input and was therefore not initialized
With the last message being:
No changes made
I have checked the MDM syndicator, and none of these idoc-fields are linked to the MDM repository.
So they are syndicated blank.
If we try to resend the material, it is again stopped and in BD87 I see the same messages.
Please help me understanding how to solve these issues.
Thanks,
Thomas

Hi,
Please refer the below threads which talks about the similar problem
http://scn.sap.com/thread/3180116
http://scn.sap.com/thread/1374222
Generally the basic view of the material to be created first. Then the sales, purchasing and other views to be created.
There are few fields in the other views which gets values from the basic data view.
Regards,
Antony

Problems with a call transaction

Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advance

Hi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                            ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
      READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
      d_clave = t_clave-bschl.
      i = i + 1.
      CASE i.
        WHEN 1.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0700'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN t.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=BU'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN OTHERS.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
      ENDCASE.
        READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                       zzbtd = t_resumen-zzbtd.
        IF j_hkont = t_porcentajes-cfacpr.
          PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
        ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
        ELSEIF t_resumen-hkont = t_porcentajes-creca.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
        ELSE.
          IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 40.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 50.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ENDIF.
*Fin modificacion marzo 2007.----
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
          PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
          PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
          PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
          PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
          PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
          PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
          PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
        ENDIF.
    ENDLOOP.

Problem with BAPI_CUSTOMER_CREATEFROMDATA1 using JCo on IDES

sorry, wrong board - i opened a new post
Problem with BAPI_CUSTOMER_CREATEFROMDATA1 using JCo on IDES
Hello everyone,
we are working on a student project and would like to create customers (debtors) in an SAP IDES system.
Using the ref-customer to copy from, and some personal-data below, we get the error message
'Internal error: External no.assignment for reference customer/customer'
We also tried with BAPI_CUSTOMER_GETINTNUMBER, and ACCOUNTGROUP ZINT (New Internet Customer, others won't work?). But CREATEFROMDATA1 takes no CustomerNo created this way, nor it wants to create one 'internal'?
Any suggestions? Thanks a lot for your help,
Greetings,
Tobias Schmidbauer
          inParams = function.getImportParameterList().getStructure(
               "PI_COPYREFERENCE");
          inParams.setValue("0000001000", "REF_CUSTMR");
          inParams.setValue("1000", "SALESORG");
          inParams.setValue("10", "DISTR_CHAN");
          inParams.setValue("00", "DIVISION");
          inParams =function.getImportParameterList().getStructure(
               "PI_PERSONALDATA");
          inParams.setValue("Simpson", "LASTNAME");
          inParams.setValue("Homer", "FIRSTNAME");
          inParams.setValue("Jay","MIDDLENAME");
          inParams.setValue("Springfield", "CITY");
          inParams.setValue("DE", "LANGU_P");
          inParams.setValue("DE", "LANGUP_ISO");
          inParams.setValue("DE", "COUNTRY");
          inParams.setValue("EUR", "CURRENCY");
          inParams.setValue("12345", "POSTL_COD1");
Message was edited by: Tobias Schmidbauer

Hello Brian,
Thanks for your pointer. Actually The customer's reference number i was providing in the PI_COPYREFERENCE structure was a sold-to party customer and it uses external customer number assignment. When i used "New Internet Customer" (that doesnt use external assignment by default) as customer's account group, the customer was created successfully and assigned customer number was returned.
I want to ask now how could we give a customer number in the BAPI as i am unable to find any such column in any of the tables. (Customer number is an "out" parameter so it can only return the number of created customer). Secondly, how to chnage the external assignment property of a particular account group (like sold-to party). i.e, how could we change the account group configurations through SAP GUI??
- Umair

Problem with V.25 transaction

Hi All
I have problem with V.25 transaction. This transaction contains some variants, and currently my variant dispalying 10 feilds. Now i want to add 2 more feilds to the report. So i went to transaction VOKF and added the two feilds to my variant. But while saving it throwing an error "Total output length (142) is larger than 132 characters". So how we can rectify this error. OR how can we increase report width from 132 char to 150..?
And can u please tell me the way like how we will search for SAP notes or OSS notes for a particular transaction in SNOTE..??
Thanks In Advance
Raghu

<b>hi jayan,
Just read the error in dump what is the problem and where it has been terminated. IF the problem in print progrm check the print program is active or not. If it is active the dump will give the line no where the termincation occurs check the line no in print programme what is the error occured. Once go through the dump analyis and and revert back with acutal problem may then u ll get the required ans.
<b>reward for useful answers</b>
Regards,
sunil kairam.

Problem with posting message in forum

This question was solved.
View Solution.

Hi dkpb,
The problem here was that IE9 at the time was incompatible with the forum software. That has since been fixed. What is your issue now? It helps if you describe your specific problem with posting so we can look into it for you.
SunshineF
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

Problem with posting write-ups in ABZU

Hello,
May I ask for your help on my concern about transaction ABZU? My asset was capitalized on 31.03.2009 and it has depreciated until last month. I would like to delete this asset because it should not have been recognized as ana sset, so my first procedure would be to derecognize the depreciated that was posted.
If I use transaction ABZU and use transaction type 700, I encounter an error that says "You cannot post write-ups". The long text explains that "None of the areas to be posted in accordance with the transaction type entered manages one of the depreciation types entered or cumulative values.".
If I use transaction type 710, I encounter the same error, but the long text says " According to the transaction type, you have to post to area 01. However, in this area, there is either no accumulated depreciation or the write-up depreciation type(s) are not managed in this area.".
I checked transaction OABU, and I could see that the depreciations areas allow unplanned depreciations. I cehcked the asset reports and the asset explorer and I can see that it contains accumulated depreciation.
What could be the reason for the error? Could it be some some settings in other customizing transaction other than OABU?
Thanks in advance for your advice.
Regards,
Peter

Hi peter
In the previous post you have mentioned that Depreciation is being Run from March - June.
iey i said 4 months.
Pass a JV means you post a document Crediting this Asset and Debitting any AUC(or any Expense G/L Account) for the Acquisition Amount.
After that you go and check in AW01N -->Asset Explorer, system will write the the Adjustment entries in all the periods of the useful life.
you then reduce the useful life for 5 months,then you will see the Total of the Depreciation posted for 4 months(it will be positive amount).
why 5months is 4months already Depreciation posted and 1month for running the Adjustment Amount(which is positive so that G/L Account Balances will also be adjusted).
You first try this scenario in test environment, you will be able to know clearly.
Hope you understand.
Regards
Venkat

Problems with environments and transactional mode in the Python API

Hello everyone,
I have been having problems with the Python API, and I wonder if anyone can comment? I am using DB XML version 2.2.13, with python 2.3 (RedHat linux WS 4.0) and python 2.4 (SuSE 10.1) with identical results. I started with a simple example:
#!/usr/bin/python
"""XPath example from http://www.w3schools.com/xpath/default.asp
ported to DbXML
from bsddb3.db import *
from dbxml import *
books = """<?xml version="1.0" encoding="ISO-8859-1"?>
<bookstore>
[xml data omitted for brevity]
</bookstore>"""
if __name__ == "__main__":
    conFlags = DB_CREATE | DB_NOMMAP
    myMgr = XmlManager()
    myMgr.setDefaultContainerFlags(conFlags)
    myMgr.setDefaultContainerType( XmlContainer.NodeContainer)
    uc = myMgr.createUpdateContext()
    container = myMgr.createContainer("books.dbxml")
    container.putDocument("books.xml", books, uc)So far, so good - this works, and creates a container books.dbxml that I can open and query. Next, I try to instantiate the XmlManager using an environment:
if __name__ == "__main__":
    envFlags = DB_CREATE | DB_PRIVATE
    conFlags = DB_CREATE | DB_EXCL | DB_NOMMAP
    myEnv = DBEnv()
    myEnv.open("/home/pkeller/dbxml_tests", envFlags, 0)
    myMgr = XmlManager(myEnv, DBXML_ADOPT_DBENV)
    myMgr.setDefaultContainerFlags(conFlags)
    myMgr.setDefaultContainerType( XmlContainer.NodeContainer)
    uc = myMgr.createUpdateContext()
    container = myMgr.createContainer("books.dbxml")
    container.putDocument("books.xml", books, uc)This fails with the following output:
Traceback (most recent call last):
File "w3school_xpath_c2.py", line 60, in ?
    container = myMgr.createContainer("books.dbxml")
File "/scratch_bernoulli/pkeller/dbxml/install/lib/python2.3/site-packages/dbxml.py", line 125, in createContainer
    def createContainer(*args): return dbxml.XmlManagercreateContainer(*args)
RuntimeError: Error: Invalid argument
Segmentation faultA bit odd - I can't find anything in the docs about the required arguments to XmlManager.createContainer being different if an environment has been used explicitly.
Anyway, I persevered (my aim being to use transactional mode in Python). Changing the environment and container flags like so:
    envFlags = DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN | DB_PRIVATE
    conFlags = DB_CREATE | DB_EXCL | DBXML_TRANSACTIONAL | DB_NOMMAPThis change allowed the script to run, outputting the single classic line:
Segmentation fault(the C++ API docs at http://www.sleepycat.com/xmldocs/gsg_xml/cxx/transaction.html#initializetransaction are incorrect by the way - there is no flag DB_TRANSACTIONAL).
In spite of the segfault, the file "books.dbxml" was produced and could be queried by another application. A transaction log file "log.0000000001" was also written (10485760 bytes long).
Running this last example again with "python -v" showed that the segfault was being produced during the python's cleanup phase:
# clear __builtin__._
# clear sys.path
# clear sys.argv
# clear sys.ps1
# clear sys.ps2
# clear sys.exitfunc
# clear sys.exc_type
# clear sys.exc_value
# clear sys.exc_traceback
# clear sys.last_type
# clear sys.last_value
# clear sys.last_traceback
# clear sys.path_hooks
# clear sys.path_importer_cache
# clear sys.meta_path
# restore sys.stdin
# restore sys.stdout
# restore sys.stderr
# cleanup __main__
Segmentation faultCan anyone clarify what is going on? I had been hoping to deploy DB XML as an alternative to something more admin-heavy, but with this behaviour that would be hard to justify. A dirty exit from Python means that no-one will consider trusting their data to this engine (or am I doing something wrong?).
Regards,
Peter.

Peter,
Your first failure -- invalid argument -- was due to an invalid combination of
flags to DBEnv.open(). Along with DB_CREATE you need at least DB_INIT_MPOOL.
As you can see, it worked once you added more flags.
The second, cleanup problem (segmentation fault) is the result of out of order
destruction of objects. This is fixed in the next release (later this year), but
you can work around it by ensuring that your XmlContainer and XmlManager
objects are deleted/cleaned up before the DBEnv object.
Python will cleanup in reverse order of creation, unless you perform explicit
deletions, which is also fine (e.g. del container, del myMgr).
Explicit deletion is always safe.
Regards,
George

Problems with navigation using JSF 1.0 RI

I have a problem with faces in that navigation simply stops working. I have a page which have prev/next buttons on it, and a cancel button. Each button is of the form
<h:form id="viewxxx">
<h:commandButton value="XXX" styleClass="buttonInput" action="#{somebean.doSomeAction}"/>
</h:form>
The code behind the next/prev button action returns "success", the cancel returns an action string which returns the user to the previous screen.
After clicking on prev/next a few times one of two possible things happen:-
(1) the navigation stops working (all buttons do nothing)
(2) or after pressing a button a few times the navigation starts to work.
I tried to simplify things to find out if my backing code was causing the problem. I included a very simple button:-
<h:form id="view_c_getridofme">
<h:commandButton value="Test" styleClass="buttonInput" action="success"/>
</h:form>
and after clicking this a few time it also breaks the navigation. So I suspect something strange is going on inside the Faces implementation.
I checked the faces-config.xml and this is correct:

<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/viewcorr.jsp</to-view-id>
<redirect />
</navigation-case>
I tried (albeit briefly) MyFaces 1.0.3 and the navigation does not break although it does present some other issues for me. My preference would be to use Sun's JavaFaces implementation if possible.
Can anyone shed light on this - why this may be happening?

I experienced the same problem while re-submitting to the same page about 15 times via a command button (a list page that would get updated with every new submit).
After having turned JSF logging on I discovered that my stylesheet (!) was interpreted by JSF as a Faces view (because of the /faces/-mapping before it) and that this caused the list page to be (incorrectly) added up towards the maximum of 15 views in the session. After 15 reloads JSF would remove the list page from view, re-create it, and I experienced the same problems as you described in the top post - no navigation worked.
My stylesheet used to be:
<link rel="STYLESHEET" type="text/css" href="../../css/foo.css">
... which kept the /faces/ mapping from the page containing the css reference, and made it look like a faces view to JSF.
When I switched to:
<link rel="STYLESHEET" type="text/css" href="/css/foo.css">
... the problem disappeared.
Hope that helps all of you that have this problem. It certainly took me quite a while to figure it out!
Mattias L

Problems with post-method in weblogic-server 6.0

Hello,
          I tried to implement a servlet in Visual Cafe working with weblogic 6.0.
          As I used the get-method it worked fine, but as I used the post-method
          I got the following java.lang.IllegalArgumentException:
          bad URLMatchMap path:''
          Does anybody know about this error and where I would have to set the
          path-variable. I have already registered the servlet in web.xml
          Thanx for your help
          Thorsten


          Try installing SP1. In SP1 a bug regarding POST using HTTPS has been fixed. Check
          the bug id 041234 in this link
          http://edocs.bea.com/wls/docs60/notes/bugfixes2.html#1073617
          Shiva.
          "Raju" <[email protected]> wrote:
          > Hi,
          >>
          >> We are using Weblogic server 6.0 with out service pack 1.0.
          >>
          >> I am having problem with Https POST, i am using port 7002. and when
          >i use
          >> https post servlet hangs for lot of time. But when i use Https using
          >GET,it
          >> works fine.
          >>
          >> Did any one face the problems.
          >>
          >> Thanks in Advance.
          >>
          >> Raju
          >>
          >
          >
          >

Problems with Flickr using BTINTERNET ID

I have been using FLICKR for sometime using by BTINTERNET EMail address as my Yahoo login.
I have been having problems with this for the last week and it is now stopped working completely as I cannot login. I have been going around and around for hours with Yahoo's very unhelpful help system but I have at last managed to get a message off to their customer service people.
One complication is that I have an old Yahoo EMail address that is still active and has a small FLICKR area with a handful of images. The ID for my mail FLICKR area from the BTINTERNET ID is the same name with first letter capitalised. There are about 8000 images there so it is rather important.
Wondering if anyone else has been having problems? Have Yahoo / Flickr changed anything?
MB
MB
Solved!
Go to Solution.

1. Sign in to Yahoo! at login.yahoo.com (using the account you normally use to sign in to Flickr.com)
2. Go to edit.yahoo.com/config/set_agreement and click the button at the bottom of the page to agree to the Yahoo! Terms of Service.
3. Go to www.flickr.com and sign in.
This fix has been posted on flickr and works

Having a problem with creating/using a primary key on a view

I have a problem with a primary key on a view
I created the view and primary key as follows:
CREATE OR REPLACE FORCE VIEW "MDD"."ROCK_LU" ("DESCRIPTION",
UNIQUE ("DESCRIPTION") RELY DISABLE,
CONSTRAINT "ROCK_LU_PK" PRIMARY KEY ("DESCRIPTION") RELY DISABLE) AS
SELECT DESCRIPTION
FROM MRMC_LU
WHERE ROCK = 'T';
The view with the primary key appears to have been created as there were no error messages. (The above was from the sql tab in sql developer.)
When I try to create the foreign key on my mdd_hr table - I get an error
/* hr_name - foreign key */
ALTER TABLE mdd_hr add CONSTRAINT hr_name_fk FOREIGN KEY (hr_name) REFERENCES rock_lu(description);
Error report:
SQL Error: ORA-02270: no matching unique or primary key for this column-list.
When I lookup the index in sql developer, rock_lu_pk is not there.
All my other foreign keys work - but I don't understand what I am doing wrong with this one. Please help.
glenn
Background - as to why I want to use a view as a lookup table.
The MRMC_LU table that the view is created from is structured like:
DESCRIPTION - MINERAL - ROCK - MODIFIER - COMMODITY
ANHYDRITE - T - T - T
APLITE - T - - T
GRAPHITE - T - - - T
GREYWACKE - - T
DESCRIPTION is a list of all names of minerals, rocks, modifiers and commodities. T is entered in each valid field. Often a description name is used for both a mineral and a rock or a mineral and a commodity or any other combination. Because this database is just starting up, it was more efficient to create one table that could be updated (and thereby automatically update the MINERAL_LU, ROCK_LU, MODIFIER_LY, COMMODITY_LU views) rather than create and maintain four separate but similar tables. A primary key cannot be generated for the MRMC_LU table as there are nulls in each column
except DESCRIPTION.
Perhaps there is a smarter way to do this?

http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_85a.htm#2065512
You can specify constraints on views and object views. You define the constraint at the view level using the out_of_line_constraint clause. You define the constraint as part of column or attribute specification using the inline_constraint clause after the appropriate alias.
Oracle does not enforce view constraints. However, operations on views are subject to the integrity constraints defined on the underlying base tables. This means that you can enforce constraints on views through constraints on base tables.
Restrictions on View Constraints
View constraints are a subset of table constraints and are subject to the following restrictions:
You can specify only unique, primary key, and foreign key constraints on views. However, you can define the view using the WITH CHECK OPTION clause, which is equivalent to specifying a check constraint for the view.
Because view constraints are not enforced directly, you cannot specify INITIALLY DEFERRED or DEFERRABLE.
View constraints are supported only in DISABLE NOVALIDATE mode. You must specify the keywords DISABLE NOVALIDATE when you declare the view constraint, and you cannot specify any other mode.
You cannot specify the using_index_clause, the exceptions_clause clause, or the ON DELETE clause of the references_clause.
You cannot define view constraints on attributes of an object column.
Rgds.

Problem with follow-up transaction from task

Hello,
I have a problem with creating follow-up transaction from tasks. Here is the problem,
I've defined two new transaction types Z010/Z020 with business transaction category BUS2000125 TASK and I want to be able to create follow-up transaction from them. After defining them I've mapped the copying control so that I'm able to create opportunities, tasks and leads from those transaction types. However, when I'm testing there is a problem. Here are the steps I'm performing:
1: I'm creating a new Task from any of those two transaction types (Z010/Z020)
2: I'm saving the transaction and then I save it.
3: Open the transaction More -> Create follow up
4: A pop-up window appears with the possible follow-up transactions (in this case task/opportunity or lead).
5: I click on any of those but nothing happens - no indication of error or whatsoever the screen just stays the same and I'm able to click on More -> Create follow up and choose any of the possible entries. However, there is no result.
I have a requirement for follow up transactions from opportunities and everything works just fine there, the problem is only with Tasks. I've tested this from the backend (CRMD_ORDER) and I'm able to create a follow-up from this transaction types (Z010/Z020), so the problem seems to be something with the CRM UI. If any of you have an idea why is this happening and how to fix it, please tell.
Thanks in advance!

Hi John,
Please refer as well to note 661305:
this part:
Note:
As of CRM 7.0, this modification is no longer required because the IMG
activity "Activate Copying Control for Activities" is provided (maintaining the
table/view CRMC_ACT_COPY_SW in transaction SM30). Here you can decide whether
the copying control for activities and tasks (BUS2000126 and BUS2000125) is
active or inactive depending on the specific client.
IMG path
(transaction SPRO):
Customer Relationship Management
-->
Transactions
--> Settings for Activities
--> Activate Copying
Control for Activities
In the standard system, the copying control for
tasks and activities remains inactive.
========================================================
Best regards - Christophe

Problem with sendRedirect using relative URL in WebLogic 5.1 with SP7 & 8

I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?


I patched to SP 7 (and also 8), and the request.sendRedirect() with relative
          URL failed. The browser simply displayed "404 - Page not found".
          This problem only happens in a cluster environment attached to a web server.
          SP6 or earlier does not have such problem.
          I noticed that the latest SP always formats the URL and returns it as a full
          absolute URL to the browser. The problem is it uses the Weblogic Server host
          URL where the request is processed (not the Web Server host URL) which is
          not visible to the internet.
          Is it possibly a bug in SP?

Problems with text using Photoshop CC on Windows 8.1

I am using Photoshop CC on Windows 8.1. I get flickering on the screen as described by others. My main problem, however, is that when I try to use the text tool the layer goes completely black and I cannot see what I am typing or edit the text. I have tried updating my video card driver and my monitor driver. I have deleted the font cache file, I have tried using Photoshop without plug ins (I use Nic plug ins). The only thing that has worked is resetting the preferences by holding down alt+control+shift keys when starting photoshop. This allows me to enter text normally on one photograph and one only. Once I have completed that first photograph and load another I get the black layer. I desperately need help. If this continues I will have to cancel my membership as I was much better off using my Photoshop Elements 11 disc.
Any help will be very gratefully appreciated...............help seems to be very difficult to come by Adobe you make it very difficult for your customers!

Ok,I can appreciate that I may not have given enough information. You state that without proper system information nobody can help, but I need to know what information is needed. You also state that I should simply turn off hardware acceleration in the perfs. What does that mean? How do I do that? I have tried changing the GPU Drawing Mode to basic and it didn't work. Is this what you mean? You may be assuming a level of knowledge I do not have. From research I have done this seems to be a problem with windows 8.1 that Adobe have been aware of for about a year. I have followed all the online advice I have been able to find but nothing seems to be working.
Siren2110

Problem with posting using transaction FB01.

Similar Messages

Maybe you are looking for