Problem with V.25 transaction

Hi All
I have problem with V.25 transaction. This transaction contains some variants, and currently my variant dispalying 10 feilds. Now i want to add 2 more feilds to the report. So i went to transaction VOKF and added the two feilds to my variant. But while saving it throwing an error "Total output length (142) is larger than 132 characters". So how we can rectify this error. OR how can we increase report width from 132 char to 150..?
And can u please tell me the way like how we will search for SAP notes or OSS notes for a particular transaction in SNOTE..??
Thanks In Advance
Raghu

<b>hi jayan,
Just read the error in dump what is the problem and where it has been terminated. IF the problem in print progrm check the print program is active or not. If it is active the dump will give the line no where the termincation occurs check the line no in print programme what is the error occured. Once go through the dump analyis and and revert back with acutal problem may then u ll get the required ans.
<b>reward for useful answers</b>
Regards,
sunil kairam.

Similar Messages

Problems with a call transaction

Hi, I'm having some problems with a call transaction and I cannot understand why. I put A in the mode, and I am seeing the dynpros and I am pressing enter it works perfectly but when I use mode N it tells me that there is not information for one of the dynpros and it doesn't work. Does anybody know the problem and how to solve it??
Thanks in advance

Hi,
First of all thank you very much for your time.
I am using FB05 and the problem is in dynpro SAPLKACB 0002, and it says that batch input data doesn't exist. Here is the code, maybe you can see what is happening
LOOP AT t_resumen WHERE belnr = t_batch-belnr AND
                            ( contador = 3 OR contador = 4 or CONTADOR = 5 ).
      READ TABLE t_clave WITH KEY belnr = t_resumen-belnr.
      d_clave = t_clave-bschl.
      i = i + 1.
      CASE i.
        WHEN 1.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0700'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN t.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '=BU'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
        WHEN OTHERS.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'RF05A-NEWBS' t_resumen-bschl.
          PERFORM bdc_field   USING 'RF05A-NEWKO' t_resumen-hkont.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_hkont = t_resumen-hkont.
          j_clave = t_resumen-bschl.
          PERFORM bdc_dynpro USING 'SAPMF05A'    '0300'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
          j_wrbtr = t_resumen-wrbtr.
          REPLACE '.' WITH ',' INTO j_wrbtr.
          PERFORM bdc_field   USING 'BSEG-WRBTR' j_wrbtr.
          PERFORM bdc_dynpro USING 'SAPLKACB'    '0002'.
          PERFORM bdc_field   USING 'BDC_OKCODE' '/00'.
      ENDCASE.
        READ TABLE t_porcentajes WITH KEY gjahr = t_resumen-zzbad
                                       zzbtd = t_resumen-zzbtd.
        IF j_hkont = t_porcentajes-cfacpr.
          PERFORM bdc_field   USING 'COBL-PRCTR' t_porcentajes-prctrfac.
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
        ELSEIF t_resumen-hkont = t_porcentajes-cadmin.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20801'.
        ELSEIF t_resumen-hkont = t_porcentajes-creca.
         PERFORM bdc_field   USING 'COBL-KOSTL' '20401'.
        ELSE.
          IF d_clave = 01 OR d_clave = 04 OR d_clave = 40 OR d_clave = 09.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 40.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ELSEIF d_clave = 11 OR d_clave = 12 OR d_clave = 14 OR d_clave = 50.
            IF j_hkont >= 424001 AND j_hkont <= 424005.
              PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
            ELSEIF j_hkont >= 424601 AND j_hkont <= 424605.
              IF j_clave = 50.
                PERFORM bdc_field   USING 'COBL-PRCTR' 'DUMMY'.
              ENDIF.
            ENDIF.
          ENDIF.
*Fin modificacion marzo 2007.----
          PERFORM bdc_field   USING 'COBL-ZZBTD' t_resumen-zzbtd.
          PERFORM bdc_field   USING 'COBL-ZZBAD' t_resumen-zzbad.
          PERFORM bdc_field   USING 'COBL-ZZBTT' t_resumen-zzbtt.
          PERFORM bdc_field   USING 'COBL-ZZBTU' t_resumen-zzbtu.
          PERFORM bdc_field   USING 'COBL-ZZBTS' t_resumen-zzbts.
          PERFORM bdc_field   USING 'COBL-ZZBAG' t_resumen-zzbag.
          PERFORM bdc_field   USING 'COBL-ZZBRE' t_resumen-zzbre.
          PERFORM bdc_field   USING 'COBL-ZZBC8' t_resumen-zzbc8.
          PERFORM bdc_field   USING 'COBL-ZZBC9' t_resumen-zzbc9.
        ENDIF.
    ENDLOOP.

Problem with follow-up transaction from task

Hello,
I have a problem with creating follow-up transaction from tasks. Here is the problem,
I've defined two new transaction types Z010/Z020 with business transaction category BUS2000125 TASK and I want to be able to create follow-up transaction from them. After defining them I've mapped the copying control so that I'm able to create opportunities, tasks and leads from those transaction types. However, when I'm testing there is a problem. Here are the steps I'm performing:
1: I'm creating a new Task from any of those two transaction types (Z010/Z020)
2: I'm saving the transaction and then I save it.
3: Open the transaction More -> Create follow up
4: A pop-up window appears with the possible follow-up transactions (in this case task/opportunity or lead).
5: I click on any of those but nothing happens - no indication of error or whatsoever the screen just stays the same and I'm able to click on More -> Create follow up and choose any of the possible entries. However, there is no result.
I have a requirement for follow up transactions from opportunities and everything works just fine there, the problem is only with Tasks. I've tested this from the backend (CRMD_ORDER) and I'm able to create a follow-up from this transaction types (Z010/Z020), so the problem seems to be something with the CRM UI. If any of you have an idea why is this happening and how to fix it, please tell.
Thanks in advance!

Hi John,
Please refer as well to note 661305:
this part:
Note:
As of CRM 7.0, this modification is no longer required because the IMG
activity "Activate Copying Control for Activities" is provided (maintaining the
table/view CRMC_ACT_COPY_SW in transaction SM30). Here you can decide whether
the copying control for activities and tasks (BUS2000126 and BUS2000125) is
active or inactive depending on the specific client.
IMG path
(transaction SPRO):
Customer Relationship Management
-->
Transactions
--> Settings for Activities
--> Activate Copying
Control for Activities
In the standard system, the copying control for
tasks and activities remains inactive.
========================================================
Best regards - Christophe

Problems with environments and transactional mode in the Python API

Hello everyone,
I have been having problems with the Python API, and I wonder if anyone can comment? I am using DB XML version 2.2.13, with python 2.3 (RedHat linux WS 4.0) and python 2.4 (SuSE 10.1) with identical results. I started with a simple example:
#!/usr/bin/python
"""XPath example from http://www.w3schools.com/xpath/default.asp
ported to DbXML
from bsddb3.db import *
from dbxml import *
books = """<?xml version="1.0" encoding="ISO-8859-1"?>
<bookstore>
[xml data omitted for brevity]
</bookstore>"""
if __name__ == "__main__":
    conFlags = DB_CREATE | DB_NOMMAP
    myMgr = XmlManager()
    myMgr.setDefaultContainerFlags(conFlags)
    myMgr.setDefaultContainerType( XmlContainer.NodeContainer)
    uc = myMgr.createUpdateContext()
    container = myMgr.createContainer("books.dbxml")
    container.putDocument("books.xml", books, uc)So far, so good - this works, and creates a container books.dbxml that I can open and query. Next, I try to instantiate the XmlManager using an environment:
if __name__ == "__main__":
    envFlags = DB_CREATE | DB_PRIVATE
    conFlags = DB_CREATE | DB_EXCL | DB_NOMMAP
    myEnv = DBEnv()
    myEnv.open("/home/pkeller/dbxml_tests", envFlags, 0)
    myMgr = XmlManager(myEnv, DBXML_ADOPT_DBENV)
    myMgr.setDefaultContainerFlags(conFlags)
    myMgr.setDefaultContainerType( XmlContainer.NodeContainer)
    uc = myMgr.createUpdateContext()
    container = myMgr.createContainer("books.dbxml")
    container.putDocument("books.xml", books, uc)This fails with the following output:
Traceback (most recent call last):
File "w3school_xpath_c2.py", line 60, in ?
    container = myMgr.createContainer("books.dbxml")
File "/scratch_bernoulli/pkeller/dbxml/install/lib/python2.3/site-packages/dbxml.py", line 125, in createContainer
    def createContainer(*args): return dbxml.XmlManagercreateContainer(*args)
RuntimeError: Error: Invalid argument
Segmentation faultA bit odd - I can't find anything in the docs about the required arguments to XmlManager.createContainer being different if an environment has been used explicitly.
Anyway, I persevered (my aim being to use transactional mode in Python). Changing the environment and container flags like so:
    envFlags = DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN | DB_PRIVATE
    conFlags = DB_CREATE | DB_EXCL | DBXML_TRANSACTIONAL | DB_NOMMAPThis change allowed the script to run, outputting the single classic line:
Segmentation fault(the C++ API docs at http://www.sleepycat.com/xmldocs/gsg_xml/cxx/transaction.html#initializetransaction are incorrect by the way - there is no flag DB_TRANSACTIONAL).
In spite of the segfault, the file "books.dbxml" was produced and could be queried by another application. A transaction log file "log.0000000001" was also written (10485760 bytes long).
Running this last example again with "python -v" showed that the segfault was being produced during the python's cleanup phase:
# clear __builtin__._
# clear sys.path
# clear sys.argv
# clear sys.ps1
# clear sys.ps2
# clear sys.exitfunc
# clear sys.exc_type
# clear sys.exc_value
# clear sys.exc_traceback
# clear sys.last_type
# clear sys.last_value
# clear sys.last_traceback
# clear sys.path_hooks
# clear sys.path_importer_cache
# clear sys.meta_path
# restore sys.stdin
# restore sys.stdout
# restore sys.stderr
# cleanup __main__
Segmentation faultCan anyone clarify what is going on? I had been hoping to deploy DB XML as an alternative to something more admin-heavy, but with this behaviour that would be hard to justify. A dirty exit from Python means that no-one will consider trusting their data to this engine (or am I doing something wrong?).
Regards,
Peter.

Peter,
Your first failure -- invalid argument -- was due to an invalid combination of
flags to DBEnv.open(). Along with DB_CREATE you need at least DB_INIT_MPOOL.
As you can see, it worked once you added more flags.
The second, cleanup problem (segmentation fault) is the result of out of order
destruction of objects. This is fixed in the next release (later this year), but
you can work around it by ensuring that your XmlContainer and XmlManager
objects are deleted/cleaned up before the DBEnv object.
Python will cleanup in reverse order of creation, unless you perform explicit
deletions, which is also fine (e.g. del container, del myMgr).
Explicit deletion is always safe.
Regards,
George

SAP Best Practice: Problems with Loading of Transaction Data

Hi!
I am about to implement SAP Best Practices scenario "B34: Accounts Receivable Analysis".
Therefore I load the data from SAP ERP IDES system into SAP NetWeaver 2004s system.
My problems are:
when I try to load the Transaction data for Infosources 0FI_AR_4 and 0FI_AR_6 I get the following errors/warnings:
when I start the "schedule process" the status getting still "yellow 14:27: 31(194 from 0 records)"
On the right side I see some actions that are also "yellow", e.g. "DataStore Activation (Change Lo ): not yet activated".
As a result I cannot see any data in tcode "RSRT" executing the queries "0FIAR_C03/...".
The problems there
1) Input help of the web template of query don't contain any values
2) no data will be shown
Can some one help me to solve this problem?
Thank you very much!
Jürgen

Be in the monitor window where u got the below issue
when I start the "schedule process" the status getting still "yellow 14:27: 31(194 from 0 records)"
and go to environment in the menu options TransactRFC--->in the sourcesystem...
give the logon details and enter and from there give the correct target destination as ur BI server and execute...
if u find some idoc's pending there push that manually using F6..
and come back to ur load and refresh....
if still it doen't turn green u can manully change status to red in STATUS tab and come to processing tab and expand ur processing details and right click on ur data packet which was not yet updated and select manual update...
it shows busy status and when it comes out of that once again refresh...
rgds,

Problems with BPC Export Transaction Data process chain

Hi everybody,
we are trying to implement the procedure "How to Export BPC Transaction Data using a custom process chain " for SAP BPC NW 7.0 and everything seems fine. However, when we execute it from Excel, the package apparently runs well (the message 'IMMEDIATE RUN: The package is running...' appears) but when we go to the watch the package status, the package does not appear in the list and there is not any file exported.
When we go to watch the log of the process chain from NW, the Modify Dynamically step runs wrongly but there is no clue of what could be done to solve it. We have done it again from scratch but we always have the same error.
Any idea out there?
Thanks in advance. Kind regards,
Albert

Hi Rich,
in the end we managed to export data. Our NW administrator created the custom process type wrongly - putting a blank space before ZBPCTXEXP - and now it has been corrected and everything works fine.
Well we have managed to transport applications to one server to another one and to export/import the transactional data.
Is there any doc that explains how to transport process chains from one server to another?
In BPC Opps manual there is not too much information and we should transport quiet a lot of process chains related with Runlogic issues .
Thanks a lot for your help.
Kind regards,
Albert Mas.

Problem with posting using transaction FB01.

Hi ,
Does anybody have an idea how to get the screen no. 302
using transaction FB01?
Deatils are :-
SAP Transaction:     FB01
SAP Program Name:     SAPMF05A
SAP Screen Number:     302
anticipating a quisk answer,
vipul

On the first screen enter a posting key of 31 and a vendor account number.
rob

Havinf problem with my oracle transaction.Error: InvalidOperationException.

I use the same oraclecommand for different 2 sql statements in one transaction. One is a simple select, another is an insert. What i wantto do is to select relevant data from related table(by select statement) and insert it into another one(by insert statement). When executing these command(one for select statement is a cmd.ExecuteReader(CommandBehavior.CloseConnection) and the other for insert statement is cmd.ExecuteNonQuery() ) it throws no exception, however when committing transaction, it throws an exception that says "InvalidOperationException was caught". When i try two different commands, it still gives the same error. Could someone pls help me? Thanks in advance...
Here is my codes:
db = new Database(); // here is my database class.
db.Connect();
OracleCommand cmd = new OracleCommand();
cmd.Connection = db.Connection;
cmd.CommandType = CommandType.Text;
OracleDataReader dr = null;
try
MiktarHesapla();
cmd.CommandText = "SELECT t2.bursno, t2.adi, t2.soyadi, t2.bokod, t2.okulu, t2.sinifi, t2.bakod, t2.bursyerikodu, t1.bursyeriadi, t2.bturkod, t2.babaadi, t2.anneadi, t1.basvurutarihi " +
"FROM DONEMLER t1 INNER JOIN BURSLAR t2 ON t1.bursno = t2.bursno " +
"WHERE t1.yil = :YIL and t1.donem = :DONEM ORDER BY t2.bursno ";
cmd.Prepare();
cmd.Parameters.Clear();
cmd.Parameters.Add(":YIL" ,fYIL);
cmd.Parameters.Add(":DONEM" ,fDONEM);
dr = cmd.ExecuteReader(CommandBehavior.CloseConnection);
while (dr.Read())
fBURSNO = dr["BURSNO"].ToString();
fADI = dr["ADI"].ToString();
fSOYADI = dr["SOYADI"].ToString();
fOGRENIMI = Convert.ToInt32(dr["BOKOD"].ToString());
fOKULU = dr["OKULU"].ToString();
fSINIFI = dr["SINIFI"].ToString();
fBURSALAN = Convert.ToInt32(dr["BAKOD"].ToString());
fBURSYERI = Convert.ToInt32(dr["BURSYERIKODU"].ToString());
fBURSYERIADI = dr["BURSYERIADI"].ToString();
fBURSTURU = Convert.ToInt32(dr["BTURKOD"].ToString());
fBABAADI = dr["BABAADI"].ToString();
fANAADI = dr["ANNEADI"].ToString();
fBASVURUTARIHI = Convert.ToDateTime(dr["BASVURUTARIHI"].ToString());
cmd.CommandText = "INSERT INTO CIKTI1(BURSNO,ADI,SOYADI,OGRENIMI,OKULU,SINIFI,BURSALAN,MIKTAR,BURSYERI,BURSYERIADI,BURSTURU,BABAADI,ANAADI,BASVURUTARIHI)" +
" VALUES (:BURSNO,:ADI,:SOYADI,:OGRENIMI,:OKULU,:SINIFI,:BURSALAN,:MIKTAR,:BURSYERI,:BURSYERIADI,:BURSTURU,:BABAADI,:ANAADI,:BASVURUTARIHI)";
cmd.Prepare();
cmd.Parameters.Clear();
cmd.Parameters.Add(":BURSNO", fBURSNO);
cmd.Parameters.Add(":ADI", fADI);
cmd.Parameters.Add(":SOYADI", fSOYADI);
cmd.Parameters.Add(":OGRENIMI", fOGRENIMI);
cmd.Parameters.Add(":OKULU", fOKULU);
cmd.Parameters.Add(":SINIFI", fSINIFI);
cmd.Parameters.Add(":BURSALAN", fBURSALAN);
cmd.Parameters.Add(":MIKTAR", fMIKTAR);
cmd.Parameters.Add(":BURSYERI", fBURSYERI);
cmd.Parameters.Add(":BURSYERIADI", fBURSYERIADI);
cmd.Parameters.Add(":BURSTURU", fBURSTURU);
cmd.Parameters.Add(":BABAADI", fBABAADI);
cmd.Parameters.Add(":ANAADI", fANAADI);
if (fBASVURUTARIHI.ToShortDateString() != "01.01.0001")
{ cmd.Parameters.Add(":BASVURUTARIHI", fBASVURUTARIHI.ToShortDateString()); }
else { cmd.Parameters.Add(":BASVURUTARIHI", DBNull.Value); }
cmd.ExecuteNonQuery();
db.Transaction.Commit();
return true;
catch
return false;
finally
db.Disconnect();
dr.Close();
}

hello,
there are two ways to do this :
1) submit two jobs, one that prints and one that creates the PDF
2) use reports advanced distribution to print and create a PDF file on the server as part of the same job, and then use web.show_document to bring up the PDF in the browser.
however, this brings up the question, why exactly you want to print and display at the same time. why not display it and let the user print form Acrobat Reader.
thanks,
ph.

Problem with the follwing transactions in IMG Screen in ECC 5.0 version.

check with the below paths and answer the questions.
img- mm purchasing--define default values for buyers
--- define tax jusristiction . But in my IDES system, the tax jusrisdiction code for the plant is in display mode. i cannot enter any tax jusrisddiction, what is the need of this txn.
img- mm purchasing- material masterentry aids for items without material master. what is the need of this txn.
img- mm purchasing-- info record--- define price history. if we select the checkbox,what is the message we
get in the po.
img- mm purchasing-- souce list- source list requiremnts at plant level what is the need of it.

img- mm purchasing--define default values for buyers
This is used to defulat the certain value for particular user
e.g. the info record history if you want to update based onthe Po or if you want to copy the last po price to the next po for same vandor and material comination than you do the settings here and than set the user parameter for particular user so system will act for that user only.
U have to setup the parameter id EVO in user id (su01) and enter the value you maintained here
--- define tax jusristiction .
It is not displayed in production or send box client. this is used to determine the tax juridiction based on the vendor and location.
img- mm purchasing- material masterentry aids for items without material master. what is the need of this txn.
This is used when you create the PO without material master, so based on this setting system will post the accouting entry
img- mm purchasing-- info record--- define price history. if we select the checkbox,what is the message we get in the po.
If you set this indicator than system will update the price history with effective price so when you run the price history report you will see the report based on the effective price not the gross price
img- mm purchasing-- souce list- source list requiremnts at plant level what is the need of it.
This functionality used to force the user to create the PO for defiend source only
e.g you have 10 vnedor in your system for particular mateiral but your company has decided to buy from two vendor only than you activate here and create the source list for those two vendor so system force the user to use those two vendor in the Po only.

Problem with calling we02 transaction code from web dynpro

Hello everyone,
I want to skip the initial screen of we02 tcode for this i have created the URL, provided the idoc number and
used the function code DYNP_CODE=ONLI for execute button.
DATA : FINAL_URL TYPE STRING.
CONCATENATE 'host' '.port' '/sap/bc/gui/sap/its/webgui?~transaction=we02 DOCNUM-LOW='
ls_itab-docnum ';CREDAT-low=' ' ' ';DYNP_OKCODE=ONLI'
into FINAL_URL.
I am trying to pass the idoc number internally and click on execute button...so that the end user can see the idoc display directly, rather than clicking the execute button manually. But, unfortunately the function code for execute buttong (ONLI) is not working. In WE02 tcode, provided input values are appeaing correctly but not triggering the execute button.
Please help!
Thanks in advance...

Hi Rohit.,
Did u tried my previous reply., Use., & ~OKCODE=ONLI .,
http://host:8000/sap/bc/gui/sap/its/webgui?sap-system-login-basic_auth=X&sap-client=800&sap-language=EN&transaction=we02&okcode=ONLI
tis will work.,
Thanks & Regards
Kiran

Problem in with automatic payment TRANSACTION    f110 transaction

Hi
We are facing problem with automatic payment TRANSACTION    f110 transaction version SAP ECC6.0
When there are multiple invoices for the same customer with cash discount amount given by the user manually( not cash discount percent)
For eg if there 5 invoices with cash discount amount
When there is payment method defined on document level for some of the invoices(3) and 2 invoices payment method is not defined on document level(Payment method is defined on customer master also for those customers )
The following dumb occurs
Settlement will be created, but the F110 cancelled with a shortdump on customer master balance update
Database error text........: "[IBM][CLI Driver][DB2] UNSUCCESSFUL EXECUTION
CAUSED BY DEADLOCK OR TIMEOUT. REASON CODE 00C90088, TYPE OF RESOURCE , AND
RESOURCE NAME"
Internal call code.........: "[RSQL/UPDT/KNC1 ]"
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPLF005" or "LF005F01"
"ZAHLVERHALTEN_FORTSCHREIBEN"
Any help in this is highly appreciated
Thanks
Sarath

1615356     F110 Code improvements
1255455     F110 Exception BCD_FIELD_OVERFLOW during item output
1237330     F110 Error if more than one down payment
1105073     F110: Program termination DBIF_RSQL_SQL_ERROR

Global transaction problem with JDriver/Oracle and Oracle XA

We are haveing serious problems with Container Managed Transactions on Bea 6.1
and Oracle with EJB having set "Required" for all methods. We have tried in vain
to make it work with JDriver as well as OracleXAClient. Both fail at sometime
during the execution throwing "Not called in cotext of global transaction" (with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this one with oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData metaData = dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null, tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from global transaction.
Interesting thing is that with OracleXA, it doesnt say this exception at this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB, we used
direct jdbc connection and then did away with it. Now all next sql queries were
executed against oracle pool using XA data source with OracleXAClient. But at
some point we again ran into the problem "XAER_PROTO : Routine was invoked in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.

AFAIR this issue was resoved by moving tx opreations out from non-tx
methods.
Regards,
Slava
"Apurb Kumar" <[email protected]> wrote in message
news:[email protected]...
Jawad,
It would be nice if you can post the full stack trace error message. Didyou try moving to
the latest service pack (sp2) for WLS6.1.
Thanks,
Jawad Mahmood wrote:
Yes we had correctly set TXDataSource and let it to point to the right
connection
pool each time and it worked well with oracle thin driver but not whenwe switched
the pool to JDriver or OracleXAClient. Note that we could aways confirmthat pool
was successfully created alongwith we could retrieve connection from itvia TXDatSource,
things gave problem after we attempted to do what i had mentioned in mylast posting.
>>
Also with JBoss 2.4.4 things work pretty well. So couldnt be our codeproblem.
"Slava Imeshev" <[email protected]> wrote:
Jawad,
Did you set up TxDataSource?
Regards,
Slava Imeshev
"Jawad Mahmood" <[email protected]> wrote in message
news:[email protected]...
We are haveing serious problems with Container Managed Transactionson
Bea 6.1
and Oracle with EJB having set "Required" for all methods. We havetried
in vain
to make it work with JDriver as well as OracleXAClient. Both fail atsometime
during the execution throwing "Not called in cotext of global
transaction"
(with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this onewith
oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData _metaData =
_dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null,tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from globaltransaction.
Interesting thing is that with OracleXA, it doesnt say this exceptionat
this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB,we
used
direct jdbc connection and then did away with it. Now all next sqlqueries
were
executed against oracle pool using XA data source with
OracleXAClient.
But
at
some point we again ran into the problem "XAER_PROTO : Routine wasinvoked
in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.
Apurb Kumar

I have problem with account that i can't make update or buy from app store There is massage appear in my payment page that i must contact with i tunes support to complete this transaction Please help me to fixe this problem as soon possible Hany hassan 00

I have problem with account that i can't make update or buy from app store
There is massage appear in my payment page that i must contact with i tunes support to complete this transaction
Please help me to fixe this problem as soon possible
Hany hassan
0096597617317
0096596677186
Thank you

You need to Contact iTunes Support...
Apple Support iTunes Store Contact Us

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

Problem with a view in XK01 transaction

Hi All,
I am working on upload conversion for Vendor Master. While doing conversion, i am getting a problem with a Contact person view in XK01 transaction. In contact person view the telephone field column sometimes allowing to add data ,sometimes it's not allowing data which results an error in conversion program saying that the telephone field in not an input field. I don't know why the view is showing the telephone field like that.
Can any one suggest the solution for this problem. I know this is configuration problem with a view but i posted in ABAP forums.
Thanks

Hi Ben,
I assume that you are writing a BDC program to upload contact person information. If so, you are trying to populate a table control here. Please check to see if you are calculating the index to assign values to the correct rows.
if you are calculating index in your program then i think it should be configuration problem as you said.
Thanks,
Ganesh.

Problem with V.25 transaction

Similar Messages

Maybe you are looking for