Problem with processor

Hello!
I have a pavlion dv-5 1160-ev
I usually play PES 2012,but three days ago started going slow. I checked the settings and said that my computer is inappropriate because i have only one core. I checked the task manager and and it also show sthe one core, like have another processor. What is going on?Could I do anything to repair this problem?
Thank you

I have trie it out replaced ur WebCamSetup by my own function and commented out //dataSinkListener lines. I created 2 files
testcam25-07-2005-36
testcam25-07-2005-55

Similar Messages

Problem with processor fan.

Hi, since a few days ago the processor fan is not starting when I turn on the laptop, it just starts when I open any windows user session, it used to work fine, suddenly changed and I don't know how to fix it, also when Is not in "High performance" mode the fan just doesn't start till I go to energy options REactive the "Max performance" option in cooling mode... I'm sorry for my poor explanation, my english is not very good, but I hope is enough to get a little help.
Thanks.

The fans on laptop computers are thermostatically controlled so they don't turn on when the computer is first turned on. "Thermostatically controlled" is a fancy way of saying that the fans are turned on and off by the heat of the computer. Once the computer gets hot enough the fans turn on. This is a power saving feature to help save on battery power. When the computer's power setting is set for Performance, power is no longer a problem and the fan will come on more quickly and frequently. I have seen where the Bios has been changed to change the fan's heat settings, so you may want to make sure that you have the latest Bios. If the computer is not getting too hot or shutting down because of heat problems, I would not worry about the fan not turning on at startup.

Problem with processor consumption ntoskrnl

In processes, System is using 15% of my processor power all the time. Just started happening yesterday. System interrupts is also showing 8% CPU. So, I clicked on GoToDetails, and I found that it was NT Kernel & System, I clicked takemetofile and it
was ntoskrnl. For the interrupts, I was taken to service Deferred Procedure Calls and Interrupt Service Routines. How can I stop this?

Hi rkguy,
Please follow the WIKI article posted by Team Zigzag to take a performance trace.
Regarding Procedure Calls and Interrupt Service Routines, the below is a blog talking about this:
Do you know where your processor spends its time?
More reference:
Troubleshooting High CPU Utilization issues using Tracelog.exe
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Weird problem with k8n neo fsr

hello!
i have weird problem with my K8N Neo-fsr and Athlon 64 2800+ socket 754, when i try to overclock i change in bios HT from 4 to 3 (for better stability), after restart nothing happen, my pc wont boot, also nothing on screen, so i must clear cmos for solve my problem and set to 4 i try several bioses from official to moded also pinochio`s and syar`s moded and allways the same issue is it problem with processor? or motherboard?
thanx for your help and sorry for my english

You should first get down cpu ratio, then get up cpu fsb and as you wanted set ht frequency from 4 to 3 and "save changes and exit" if it doesn't boot change you psu (at least antec 380 or tagan) or go fast to send back your mobo to reseller!!

Problem with running sample code from XML Schema Processor for Java

Hi there,
I downloaded the XML Schema Processor for Java and tried it out. Unfortunately, it failed at the first step. FYI, I included all xmlparserv2.jar and xmlschema.jar in my classpath.
I compiled XSDSample.java with a warning: XSDSample.java uses a deprecated API. Recompile with "-deprecation" for details. There was no problem with compiling XSDSetSchema.java.
When I tried to run report.xml by typing java XSDSample report.xml, I got Parsing report.xml
NonParserException: null.
I guess that report.xml from the sample is not valid.
Could any one give me a hint? Any suggestion would be greatly appreciated.
---Denali
null

Please post this message at:
Forums Home » Oracle Technology Network (OTN) » Products » Database » XML DB

My problems with Oracle Schema Processor for C++ :(

Dear ;) Oracle XML team and others,
the followings are really inconvenient with the C++ schema processor:
-it doesn't even support the Candidate
Recommendation (OK, the Java version does
support it, and you can use XSU and upgrade your schemas later when the C++ will also
support it.)
-you cannot put comments in the schema, just after the <xsd:schema> element.
-it's checking the attribute use="required"
when an attribute is declared in a
complexType, but it doesn't check
when an attribute is referenced or, which could be much more useful, when an
attributegroup is referenced, and it contains
use attributes. (I tried XMLSpy and it was correct. But I need an API or a C++ tool.)
I'm really awaiting this schema processor to be updated (maybe on April 14 the W3C Schema recommendation ;))
-it supports "import" but I had problems with "include" (this looked like a bug, but after I'd posted it, noone replied :(. Maybe because the C++ processor is kind of "obsolete")
Will the C++ version be updated? (When?)
I cannot use Java because I try to integrate with a C++ application. I was looking for
other products, but I only found XSV, Java XSD processors and built-in tools. It's quite sad that there isn't a C++ implementation available. :( Can anyone help me?
Tamas
null

Originally posted by Tamas >Marcinkovics ([email protected]):
Dear ;) Oracle XML team and others,
-you cannot put comments in the schema, just >after the <xsd:schema> element.I tried the following:
<?xml version="1.0"?>
<schema
xmlns = "http://www.w3.org/1999/XMLSchema"
targetNamespace = "http://www.CarDealers.com/">

<element name="Car">
</element>
</schema>
and it works!
Can you provide some examples?
Thx!
null

Problem with schema processor

Hello,
I'm using the newest xml xdk (9.2.0.3.0) for windows. I have the following test example for the schema-processor
<?xml version="1.0" encoding="UTF-8"?>
<REPORT ID="4711" xmlns="http://www.oracle.com/REPORT" xmlns:COMOD="http://www.oracle.com/REPORT" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/REPORT example.xsd">
<Module>
          <FELDA MODULE_ID="104">FELDA
               <FELDB MODULE_ID="4711">Test</FELDB>
          </FELDA>
          <FELDA MODULE_ID="105">hkfjdn
               <FELDC MODULE_ID="4811">test2</FELDC>
          </FELDA>
          <FELDA MODULE_ID="106">
               <FELDB MODULE_ID="4576">fhgjf</FELDB>
               <FELDC MODULE_ID="3457">tzdhs</FELDC>
               fhgjdfl
          </FELDA>
          <FELDA MODULE_ID="103">FELD_VALUE</FELDA>
</Module>
</REPORT>
and the corresponding xsd-file
<?xml version="1.0" encoding="UTF-8"?>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.oracle.com/REPORT" xmlns:REPORT="http://www.oracle.com/REPORT" elementFormDefault="qualified">
     <complexType name="FELDAType" mixed="true">
          <choice minOccurs="0" maxOccurs="unbounded">
               <element name="FELDB" type="REPORT:FELDBType"/>
               <element name="FELDC" type="REPORT:FELDCType"/>
          </choice>
          <attribute name="MODULE_ID" type="string" use="required"/>
     </complexType>
     <complexType name="FELDBType">
          <simpleContent>
               <extension base="string">
                    <attribute name="MODULE_ID" type="string" use="required"/>
               </extension>
          </simpleContent>
     </complexType>
     <complexType name="FELDCType">
          <simpleContent>
               <extension base="string">
                    <attribute name="MODULE_ID" type="string" use="required"/>
               </extension>
          </simpleContent>
     </complexType>
     <complexType name="ModuleType">
          <sequence>
               <element name="FELDA" type="REPORT:FELDAType" minOccurs="1" maxOccurs="unbounded"/>
          </sequence>
     </complexType>
     <element name="REPORT">
          <complexType>
               <sequence>
                    <element name="Module" type="REPORT:ModuleType"/>
               </sequence>
               <attribute name="ID" type="string" use="required"/>
          </complexType>
     </element>
</schema>
The xml-spy 44 says everything is valid, but I got the following error using the schema test example xsdtest.cpp
In line 15 of example.xml:
LSX-00204: Extra data at end of complex element
LSX-00213: Only 0 occurance(s) of element "s", minimum is 1
Here is the xsdtest.cpp
// Copyright (c) Oracle Corporation 1999, 2000, 2001. All Rights Reserved.
// NAME          validate.c
// DESCRIPTION     Sample usage of C XML Schema processor
#include <iostream.h>
#include <string.h>
#ifndef ORAXML_CPP_ORACLE
# include <oraxml.hpp>
#endif
#ifndef ORAXSD_CPP_ORACLE
# include <oraxsd.hpp>
#endif
int main(int argc, char **argv)
XMLSchema schema;
XMLParser parser;
Element *root;
xmlctx *ctx;
char doc, uri;
uword ecode;
cout << "XML C++ Schema processor\n";
if ((argc < 2) || (argc > 3))
     cout << "usage: validate <xml document> [schema]\n";
     return -1;
doc = argv[1];
uri = (argc > 2) ? argv[2] : 0;
cout << "Initializing XML package...\n";
if (ecode = parser.xmlinit())
cout << "Failed to initialize XML parser, error " << ecode;
return 1;
cout << "Parsing '" << doc << "'...\n";
if (ecode = parser.xmlparse((oratext *) doc, (oratext *) 0,
                    XML_FLAG_DISCARD_WHITESPACE))
cout << "Parse failed, error " << ecode << "\n";
return 2;
cout << "Initializing Schema package...\n";
if (ecode = schema.initialize(&parser))
     cout << "Failed, code " << ecode << "!\n";
     return 3;
cout << "Validating document...\n";
root = parser.getDocumentElement();
if (ecode = schema.validate(root, (oratext *) uri))
cout << "Validation failed, error " << ecode << "\n";
schema.terminate();
return 4;
cout << "Document is valid.\n";
schema.terminate();
return 0;
Could you please help. There should be a problem with mixed content in a ComplexType or with the attribute minOccurs and maxOccurs at the choice element.
Thank you in advanced
R|diger Brand
ESG GmbH

I just installed the parser and schema and
it worked out of the bag for me.
I'm using Java 1.3.0 :
java version "1.3.0"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.3.0-C)
Java HotSpot(TM) Client VM (build 1.3.0-C, mixed mode)
But, like the original poster, I wonder why
these samples use the old standard?
The readme doc says it conforms to the 2000/10 spec.
For grins I changed report.xml and report.xsd to now reference the 2000/10 namespaces and the parser runs but reports some errors. I guess that is OK, and that somebody just needs to update the schema itself to the new standards. Still, it makes me wonder...
Now, my problem is that I have an xml/xsd combo that it chokes on but that is another post.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Denali ([email protected]):
Hi Karin,
I copied report.xml and report.xsd from the context of your message body and tried them out. They both worked well with XSDSample and XSDSetSchema. The only difference, I guess, is that I am using IBM's jdk1.1.7. You might want to get a lower version of jdk, like 1.1.7 or 1.1.8 and try them out again.
The only problem I have is the data type of "date". It seems to me that all the date types of "date/time" have not been implemented by Oracle yet.
Cheers.
---Denali
<HR></BLOCKQUOTE>
null

I have an iPhone 4 that is not holding charge and heating up. I've been told it is a problem with the processor.

I have an iphone 4 that is not holding charge and is heating up excessively. I've been told that the iphone 4 is having problems with the processor and that it will soon die and there is no way to repair it. I got my phone in CR through Kolbi / ICE which guarantees it only for a year. I would like to know what Apple would like me to do. i have not taken it in for rapair or anything in hopes that they will acknowledge that the phone is only a year old and would support it.
Appreciate your help,
Belkis Young

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple or the Apple Authorized Service Center in the country where the device was originally sold. The warranty is not International.
All iPhones come with a one year warranty when sold as new.

HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

Problem with dv7-6140ew - is this a processor problem ? (i7-2630qm).

Hello all
As I mentioned in title I have a problem with hp pavilion dv7-6140ew (i7-2630qm) Win7 64bit.
This is a brand new laptop I bought him few days ago
Of course I notified this problem to the hp support center. But they did not know what it could be.
But may someone will know where the problem is.
I would like also to ask whether this is the normal behaviour?
I have terrible interrupting (It looks similar to old problem with HDD witchout DMA) I saw, that it took place while the kernel process suddenly takes the large amount of the processor space. For instance
by the mcAffee process (the antivirus) but it takes place also with other
(eg at uninstalling of the software). But not always - There is on no rule.
I recorded the example-film with 3dmark03 (I added the music from winamp) and in 0:25 the McSvHost.exe process start - which is visible on the photo.
Check my video http://www.youtube.com/watch?v=dsV861xbVbw
and the photo https://lh6.googleusercontent.com/-Spo2l-5sr3Y/Tpg7l8t2XII/AAAAAAAAC1s/3elBg68MWV4/s720/IMGP4330.JPG
Bios version F.1A, 2011-07-22
Windows 7 64bit
Processor i7-2630qm
4GB ram
Radeon 6770M

Another issue, that I found, is that, If process takes suddenly large amount of processor space in each of 4 core (8 with turbo boost) the error take place. For instance mcAfee process McSvHost sometimes cause such error. But it disappear when I change colligation in task manager for this process to be used by for instance one core.
Does anybody knows what is going on and what cause it ?

Problem with threads hanging

We have a problem where our application stops responding after a few days of usage. Things will for fine for a day or two, and then pretty quickly threads will start getting hung up, usually in places where they are allocating memory
We are running WebLogic 8.1 SP2 on Sun JDK 1.4.2_04 on Solaris 8 using the alternate threading model and the -server hotspot vm. We are running pretty much the same code that we had no problems with under WebLogic 6.1 SP4 and Sun JDK 1.3.1.
A thread dump usually shows that some or all of our execute threads are in the state "waiting for monitor entry" even though they are not currently waiting on any java locks. Here is a sample thread from the thread dump (we have ~120 threads so I don't want to post the full dump).
=============================================================================================
"ExecuteThread: '8' for queue: 'itgCrmWarExecutionQueue'" daemon prio=5 tid=0x005941d0 nid=0x2c waiting for monitor entry [c807f000..c807fc28]
at java.lang.String.substring(String.java:1446)
at java.lang.String.substring(String.java:1411)
at weblogic.servlet.internal.ServletRequestImpl.getRelativeUri(ServletRequestImpl.java:1872)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3492)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2585)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
=============================================================================================
String.java line 1446 for this jdk allocates a new String object, and all the other threads in this state also are creating new objects or arrays, etc.
We've done a pstack on this process when it's in this state, and the threads that are in the "waiting for monitor entry" that look like they're allocating memory are all waiting on the same lwp_mutex_lock with some allocation method that's calling into the native TwoGenerationCollectorPolicy.mem_allocate_work (see pstack output below for the same thread as in the thread dump above)
=============================================================================================
----------------- lwp# 44 / thread# 44 --------------------
ff31f364 lwp_mutex_lock (e3d70)
fee92384 __1cNObjectMonitorGenter26MpnGThread__v_ (5000, 525c, 5000, 50dc, 4800, 4af0) + 2d8
fee324d4 __1cSObjectSynchronizerKfast_enter6FnGHandle_pnJBasicLock_pnGThread__v_ (c807f65c, c807f7d4, 5941d0, 0, 35d654, fee328ec) + 68
fee32954 __1cQinstanceRefKlassZacquire_pending_list_lock6FpnJBasicLock__v_ (c807f7d4, ff170000, d4680000, 4491d4, fee1bc2c,
0) + 78
fee3167c __1cPVM_GC_OperationNdoit_prologue6M_i_ (c807f7bc, 4400, ff170000, 2d2b8, 4a6268, c807fa18) + 38
fee2e0b0 __1cIVMThreadHexecute6FpnMVM_Operation__v_ (c807f7bc, 963a8, 0, 0, 1, 0) + 90
fed2c2a4 __1cbCTwoGenerationCollectorPolicyRmem_allocate_work6MIii_pnIHeapWord__ (962c0, ff1c29ec, ff1c297c, ff131a26, 4800, 4998) + 160
fed22940 __1cNinstanceKlassRallocate_instance6MpnGThread__pnPinstanceOopDesc__ (ee009020, 5941d0, 15ca581, 3647f0, 4a6268, c807f8c8) + 180
fed34928 __1cLOptoRuntimeFnew_C6FpnMklassOopDesc_pnKJavaThread__v_ (ee009018, 5941d0, 0, 0, 0, 0) + 28
fa435a58 ???????? (ee009018, e86de, 15ca4de, 50dc, 5941d0, c807f9c8)
fb36f9a4 ???????? (0, d412ccd8, ee046c28, ff170000, 0, 0)
fad8b278 ???????? (ee046c28, d6000c90, ee046530, 8, db8e8450, c807f9e8)
fad62abc ???????? (d412ccd8, ee046530, d6000c90, ee3bfa38, 8, c807fa18)
fa4b3c38 ???????? (c807fb9c, 0, f2134700, fa415e50, 8, c807faa8)
fa40010c ???????? (c807fc28, c807fe90, a, ee9e1e20, 4, c807fb40)
fed5d48c __1cJJavaCallsLcall_helper6FpnJJavaValue_pnMmethodHandle_pnRJavaCallArguments_pnGThread__v_ (c807fe88, c807fcf0, c807fda8, 5941d0, 5941d0, c807fd00) + 27c
fee4b784 __1cJJavaCallsMcall_virtual6FpnJJavaValue_nLKlassHandle_nMsymbolHandle_4pnRJavaCallArguments_pnGThread__v_ (ff170000, 594778, c807fd9c, c807fd98, c807fda8, 5941d0) + 164
fee5e8dc __1cJJavaCallsMcall_virtual6FpnJJavaValue_nGHandle_nLKlassHandle_nMsymbolHandle_5pnGThread__v_ (c807fe88, c807fe84, c807fe7c, c807fe74, c807fe6c, 5941d0) + 6c
fee6fc74 __1cMthread_entry6FpnKJavaThread_pnGThread__v_ (5941d0, 5941d0, 838588, 594778, 306d10, fee69254) + 128
fee6927c __1cKJavaThreadDrun6M_v_ (5941d0, 2c, 40, 0, 40, 0) + 284
fee6575c _start   (5941d0, fa1a1600, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Also when it's having this problem, the "VM Thread" is always using a lot of processor time. We did a couple of pstacks today while it was having this problem, and this thread was stuck in the ONMethodSweeper.sweep for over 15 minutes when we finally killed the server.
From the thread dump:
"VM Thread" prio=5 tid=0x000e2d20 nid=0x2 runnable
From the first pstack:
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed40c04 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (42a2f4, fa5fa46d, ffffffff, fc4ffcb8, 42a2f4, 42a324) + 124
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (42a2f0, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (fa5f7f88, fa608940, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Second pstack
=============================================================================================
----------------- lwp# 2 / thread# 2 --------------------
fed41180 __1cXvirtual_call_RelocationIparse_ic6FrpnICodeBlob_rpC5rppnHoopDesc_pi_nNRelocIterator__ (0, ff1b9664, ffffffff, fc4ffcb8, a6f2cc, fc4ffbd0) + 6a0
fed46318 __1cKCompiledIC2t5B6MpnKRelocation__v_ (a6f2c8, fc4ffd24, fc4ffd4c, e802, 0, 6) + 38
fed90c38 __1cHnmethodVcleanup_inline_caches6M_v_ (faded4c8, fadf2c80, 1, 0, fa400000, 6) + 1ac
fede18b4 __1cONMethodSweeperFsweep6F_v_ (2cf38, 0, ffffffff, ff1cf1fc, ff1c66e8, fede1d44) + 1b0
fede1e6c __1cUSafepointSynchronizeFbegin6F_v_ (2cf38, ff1ba138, 5000, 50dc, 5000, 525c) + 248
feef1fd4 __1cIVMThreadEloop6M_v_ (4400, 4000, 4324, 4000, 42b0, 3800) + 3d4
feef1ae4 __1cIVMThreadDrun6M_v_ (e2d20, 2, 40, 0, 40, 0) + 8c
fee6575c _start   (e2d20, ff270200, 0, 0, 0, 0) + 134
ff3758c0 lwpstart (0, 0, 0, 0, 0, 0)
=============================================================================================
Has anyone ever seen anything like this? I'm trying to figure out if this is caused by something we're doing, or something relating to our environment and jvm options. Any ideas?

Thanks for the reply - I'm testing our app with the +UseConcMarkSweepGC now in our test environment to make sure it doesn't cause any problems there. Unfortunately the only place we've had this problem is on the production server, so it's extra difficult debugging this.
We're using the following memory options:
-ms512m -mx512m -XX:NewSize=128m -XX:PermSize=192m -XX:MaxNewSize=128m -XX:MaxPermSize=192m -XX:SurvivorRatio=8and the following debugging options, as we've also been seeing OutOfMemoryErrors ( see http://forum.java.sun.com/thread.jsp?forum=37&thread=522354&tstart=45&trange=15 )
-verbosegc -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:+PrintHeapAtGCBTW, which c++filt version and options are you using? Our Solaris boxes only seem to have the GNU version installed. I was trying to run that on some of the other stack traces and wasn't getting anywhere, and didn't know if because it was GNU version wouldn't work on something compiled with the Sun compiler.
Thanks!
--Andy

Problem with l355 s7817 Blue Screens and will not boot up

Hello, I am new to this forum so excuse my forum etiquitte. I have a l355 S7817 for 2 yrs and I have had to do a system restore on this laptop twice. I am a Vista SP2 user that has been getting blue screens recently when trying to boot up. I have gone and cleared cache, temp files, temp internet files and removed new software that was loaded and I am still getting the BSOD. I can come up in safe mode, sometimes with networking but when I go to copy data to my external HDD so I can do a system restore again, I get the BSOD. I have tried to restore from a chk point and still get errors. I need to gather my data off the drive so I can do a restore but I cannot get my data due to it fails in the middle of the copy. Any ideas what could be causing this.
I had no problem with my laptop all last week but come Monday, It started doing this. I get a message in Safe mode saying Windows has recovered from an unexpected shutdown. Windows can check for a online solution to the problem. It finds nothing and in the problem details it says
Problem event name Blue screen
OS version 6.0.6002.2.0768.3
Locale ID 1033
Additional Info on problem
BCCode 19
BCP1 00000020
BCP2 9E384BD0
BCP3 9E384C98
Any help would be appreciated.....
Thanks

Bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
SYMEFA.SYS is a Symantec driver. If you have any Symantec/Norton products, I suggest you remove them. It's necessary to tear them out by the roots using their tool
   Download and run the Norton Removal Tool to uninstall your Norton product
Microsoft's AV works just fine.
   Security Essentials.
==================================================
Dump File         : Mini081910-20.dmp
Crash Time        : 8/19/2010 1:46:17 PM
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code    : 0x00000050
Parameter 1       : 0xbff59c01
Parameter 2       : 0x00000000
Parameter 3       : 0x837505ba
Parameter 4       : 0x00000000
Caused By Driver : SYMEFA.SYS
Caused By Address : SYMEFA.SYS+103b
File Description :
Product Name      :
Company           :
File Version      :
Processor         : 32-bit
Computer Name     :
Full Path         : C:\Test\Mini081910-20.dmp
Processors Count : 2
Major Version     : 15
Minor Version     : 6002
==================================================
-Jerry

10.6.8 Upgrade Problems with Google Display Error post install

Hi -- I just upgraded my IMac to 10.6.8 in anctipation of migrating to Mountain Lion later this week.   While the installation went very smoothly, it seems I am having a problem with the Google display.    When I open Google, the search box has no lines around it and when I enter the box, it jumps to the Google search in the menu bar, and I can't read what I'm typing.
I've tried a multitude of other sites where there are search boxes, log in boxes, etc, but I am only having problems with Google.   Any thoughts?
Model:                         IMac 9,1
Processor Speed:         3.06 GHz
# Processors:               1
Total # of Cores:           2
L2 Cache:                    6 MB
Memory:                         4 GB
Bus Speed:                    1.07 GHz
Thanks
Bill

boy these forums really help you out. having similar issue and no one seems to have a clue why 10.6.8 screws everything up. I did notice the active directory plugin version changed from 6.5 to 6.5.1. They did something.

Problem with Adobe Premiere Elements 11

Hello
Need your advice .
Problem Description:
Adobe Premiere Elements 11 (BOX)
After adding any the timeline material ( pictures or music or video) , 2-3 seconds hanging.
Then closes without any notification.
This program gave me a friend, not for need. He used it to me.
By not knowing at first I installed a Pr, and then my friend temporarily deactivate the license .
In the "Help" menu is available only " Deactivate" ...
It is a problem with the activation or something else?
Hardware:
Operating system Windows XP 32bit sp3
3GB RAM
Processor Intel Q8300 ( 4 cores )
motherboard Asus P5P41TD
video card nVidia GT220 - Latest drivers
Direct X 9.0c
Software:
last QuickTime
microsoft visual c + + 2008 redistributable
microsoft visual c + + 2010 redistributable
net framework 4
net framework 3.5
net framework 3.5 language pack
k-lite codec pack full
Help please .

-What model of camcordder is your video coming from and what format and resolution is it?
I tried to add a video with the two devices.
Samsung HMX-H300
Video settings added to the project:
Video: MPEG4 Video (H264) 1280x720 50fps 12009kbps [V:
HMX-H300 [eng] (h264 main L4.1, yuv420p, 1280x720, 12009 kb / s)]
Audio: AAC 48000Hz stereo 127kbps [A:
HMX-H300 [eng] (aac, 48000 Hz, stereo, 127 kb / s)]
Used settings:
PAL-AVCHD-AVCHD LITE 720p50
The same thing happens and another video.
Sony DSC-H5
Video settings:
Video: MPEG1 Video 640x480 30fps 104857kbps [V: mpeg1video, yuv420p, 640x480, 104857 kb / s]
Audio: MPEG Audio 32000Hz mono 64kbps [A: mp2, 32000 Hz, mono, 64 kb / s]
Used settings:
DSLR-480p-DSLR 640x480p50
the same result.
-How did you get the video from this camcorder to your computer?
Files are copied to the flash card to the HDD.
-Have you ensured that a video clip from this camcorder is the first clip on your timeline so that the program can match its project settings to your video specs?
Yes. Video clip from this camcorder is the first clip in the timeline.
Parameters of the project and the video above.
-When your project settings match your video specs, you will NOT see a yellow orange line along the top of the timeline, above your video clips, in Expert mode. Is this the case with your project?
No. I suspect that the problem occurs in the video is displayed on the timeline.
Because the assets of the project and put the video thumbnail is displayed on this video.
at the time of the drop on the timeline displays only rectangular frame that meets the duration of the video itself. let go of the mouse button. Displays only the blue rectangle.
Thumbnails of the first and last frames do not appear. takes 2-3 seconds and Pr closed.
I believe that until you see the yellow line is not reached.
-Have you ensured that any photos you use are sized to no larger than 2000x1500 pixels in size?
Yes, size is not more than 2000x1500
- You're using a somewhat antiquated 32-bit operating system that can make limited use of your RAM load (which may explain why you only have 3 gigs of RAM), so you'll need to optimize your workflow by matching project settings to your video as closely as possible in order for the program to work effectively and stably.
yes, you're right. need to upgrade to 64bit. so I put 4GB of RAM, but I can not install 64bit Vindovs. no time. and available only 3.25 GB.
I would add, I hope it will help isolate the problem.
I've been tracking work in process monitor Pr. the very moment when it closes when you move the video on the timeline.
begins after the closing lines
Registry
RegOpenKey
HKLM\Software\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\ContentAnalysisData.dll
Before doing so, refer to
File System
C:\Documents and Settings\All Users\Application Data\Adobe\Premiere Elements\11.0\Online\DVD Templates\All_Lang\General\(A) Fun\it_IT_FUN_PAL_S_SM_OUTPUT_s_prv_sm.png
and the like ...
I turned drvatson. now the error appears as a window.
System disk, and on which stands Pr error checking. there are no errors.drive on which stands Pr error checking. There are no errors.

Problems with Adobe Speedgrade CS6 in Windows 7

I am having problem with Adobe Speedgrade CS6 on my Windows 7 machine with the following specs:
Windows 7 Ultimate SP1
Gateway FX 6800-01e
2.67 GHz i7 Quad-core processor
16.0 GB RAM
750GB primary hard drive (Seagate ST3750528AS)
2 - 2TB secondary hotswap drives
NVidia Quadro 4000 w 2GB dedicated RAM
2 Acer 231SHL HD monitors running in extended dual screen mode
Adobe Speedgrade 6.0.4x25
It takes almost 3 minutes to open and when it does open it is slow to respond. After trying to troubleshoot it through driver updates, etc., I have done a totally clean reinstall of Windows 7, updated drivers where applicable, and disabled all malware and antivirus protection to rule out interference. I have also tried uninstalling it and reinstalling it. I have also applied the latest update through the program interface. The other components of the suite I have installed are:
Premiere Pro CS6
After Effect CS6
Acrobat XI
Audition
Bridge
Photoshop (32-bit and 64-bit versions)
Lightroom 4.3
Prelude
The other components, including Premiere and After Effects open fine with no problem. I would appreciate any assistance with this problem that might be offered, as I am frustrated and stumped. Thanks in advance!
-Carl Hayes
"What we have here is failure to communicate." - Strother Martin as Captain in Cool Hand Luke.

Hi,
Have you get rid of the problem ?
I've got almost the same problem. Every program from adobe production premium are working fine, but when I start movie on speedgrade windows blows off.
It's on windows 7 pro.
Thanks in advance

Problem with processor

Similar Messages

Maybe you are looking for