Problem with refresh button in tool bar in ALV

hello experts,
I am displaying a report using OOPS ALV. Here i am deleting one row. After deleting the row, if i clicked on REFRESH button in the tool bar, it should display the table newly with all updations which i made. wat is the code to perform dis.
thanks in adance,

in normal ALV we can refresh using     sel-refresh = 'X'.
in OOPS ALV
IF wa_toolbar-function = '&REFRESH'.
        wa_toolbar-function = 'REFRESH'.
        wa_toolbar-disabled = gc_x.
        MODIFY e_object->mt_toolbar FROM wa_toolbar
                          TRANSPORTING function disabled.

Similar Messages

How to inactive the push button on tool bar of alv report

hi masters,
i m working on the ALV interactive report, in this report i have to do 2 different operation on 2 screen.
eg.- on first screen i have the push button for 'data' and on second screen i will have the push button for 'upload'.
in this i don't want to give the 'upload' button on first screen and same i don't want to give the 'data' button on 2nd screen.
i tried with using the 2 different gui status and 2 different PF-STATUS but its not working.
anyone can tell me how i can deactivate the 'upload' button on first screen and how i can do same for 'get' buttton on 2nd screen.
regards,
vicky

HI Vicky ,
                  if u want an interactive ALV report , there are lot of forums already having the solution for that , but let me give u the solution anyway.
In the function module "REUSE_ALV_GRID_DISPLAY" , import parameters
     I_CALLBACK_PF_STATUS_SET          = 'FLIGHT'
     I_CALLBACK_USER_COMMAND           = 'BUTTON_CLICK'
has to be supplied to this function module . The PF status is where u hav created the two buttons , that PF status has to be given here .If the user clicks on the button then it is handled by the form routines . Inside the sub-routine based on the button the user has selected u could perform the action.
FORM FLIGHT    USING RT_EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'FLIGHT' EXCLUDING RT_EXTAB.
ENDFORM.
Here the "Flight" is the PF_status .
FORM BUTTON_CLICK USING UCOMM type SY-UCOMM
                       SELFIELD type SLIS_SELFIELD.
CASE UCOMM.
    WHEN 'BUTTON!' .
write ur code for button 1.
WHEN "BUTTON"
*Write ur code for button2 .
end case.
endform.
for any queries reply back.
regards

Allt he links in the header of any websites are not working, I reinstalled fiorefix and it s the same. No problem in others browser. the tool bar is working but not the link sinside the web page located between the top 300px height

all the links in the header of any websites are not working, the cursor is not changing into pointer and no way to click on any link located at the top of any website page. I reinstalled firefox and it s the same. No problem in others browser. the tool bar is working but not the links inside any web page located between the top 300px height.
So I can t tlog into any website, i cant write an email as the compose button is located in the top of the page.. Please help, i have all my bookmarks into my firefox...

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Problems with parameter button in Crystal Report Server 2008

Dear all,
I have problems with parameter button in Crystal Report Server 2008.
when I created some parameters and groups in Crystal Report 2008, they showed both parameters in 'Parameter button' and group in 'Group button' on the left, so I can choose or type without clicking 'Refresh button' But when I added it to Crystal Report Server 2008 and I click parameter button , it doesn't show any parameter. Only click refresh button to choose them. On the other hand, for 'Group Tree' is ok. When go to Default Setting-> Parameter, all parameters are in 'Unused parameter' First time I think I had problems with my installation, but when I reinstalled it again, it was like before.
Could any one help me with this?
I appreciate looking forward to your reply
Ketya

Try posting your questionin the correct forum, this is for SAP Business One, not Crystal reports Server

Problems with home button on iPhone 4

problems with home button on iphone 4

If its due to sensitivity issues, these self help guides might help.
http://www.youtube.com/watch?v=zNwr_mxgs9Q
http://www.youtube.com/watch?v=lSqPC1V0PPg&feature=related
By the way, alcohol based hand sanitisers work too.
Don't overapply it in one go though. You'll have to allow the alcohol to evaporate.
One final tip, after its dried, I'd recommend you to leave your iPhone's home button facing a laptop's vent just to bake it a little drier.

Problem with refresh of snapshot

I am facing one problem with refresh of a snapshot. In the front end (developed in D2K) there is a PL/SQL code written which loops through user_snapshots and refreshes each snapshots one by one.
With one particular snapshot its giving the error. I traced the session and found the problematic snapshot. I tried to refresh the same snapshot with some other user with DBA role granted to it and its working fine.
Now I logged in to SQL Plus with the user Z0000 ( This is the user with which the application user logs in to the application) and tried to rerfresh the snapshot. Its giving me ORA-03113 end-of-file on communication channel. Then I granted DBA role to user Z000 and then tried to refresh its again giving the same error.
I tried with many different users and its working fine.
Any ideas where could be the problem.
Thanks
Sidhu
Database is 10gR2 on AIX 5.3
Message was edited by:
Sidhu

Hi,
did you try to do it locally?
Maybe a possible problem on the network.
This issue remembers me a bug on older versions.
It is strange on a 10.2
Acr

Help!!! How to implement a special useful button in tool bar?

How to implement a special useful button in tool bar, when the button is clicked, then a menu shows under the button, just like the Internet Explorer's back button and forward button, there is a black arrow at the two buttons right, when click the black arrow, a menu shows under the back button or forward button, how to implement this in java?
Please help!!!
Thanks!!!

Like an enhanced JComboBox?
;o)
V.V.

Problem with Information button in WAD

Dear Mates,
I have a problem with Information button in WAD template.
I have two queries in web template. those two queries are in two tabs( i used Tabstrip ) respectively.
if i press first tab it shows query1 and if i press second tab it shows query2 absolutely.
problem
when i am in first tab, if i click information it will show information about query1, but when i am in second tab,
if i click information it will show information about query1 only..
i need it to show information about second tab.
Please help. Its urgent. Full Reward points will be given.
Thanks in advance.
Regards,
Ranganath

check out this link
http://www.mhprofessional.com/downloads/products/0071640266/0071640266_chap01.pdf

A really annoying problem with a button/movie clip

I am having a problem with a button! its driving me insane
because i managed to do it last week, but that was by chance and
now i can't remember how i did it!
I can get the button (i'm using gelright from the common
libraries panel) and convert it to a movie clip(by pressing F8) and
even attach a behaviour but when i play the movie it doen't work!
when i move the curser over the button it changes into a hand, but
will not act like a button, even though i have set the behaviour to
'on release, go to and play keyframe 2'.
Please help me, for the sake of my laptop goin through the
wall!

virgosam20 wrote:
> first, i found the button i wanted in the common
libraries (gelright) and
> added it to the stage. I resized it and converted it
into a symbol as a movie
> clip. Then it got added to my library.
> Then i deleted it from the stage and replaced it with
the movie cip version i
> had just converted it to. so now i have the same object
on the stage, but now
> its a movie clip and not a button.
ok - you are running yourself around in circles - why did you
delete it to the stage only to add it
again? once you converted it to a movie clip, you had what
you wanted on the stage - but then you
deleted it and dragged another instance of the same symbol
back onto the stage - there's no reason
to do that.
> Then i double clicked on it to bring up the movie clip
timeline, but instead
> of saying 'top, down, over, hit' (or whatever it says),
it jsut said 'layer 1'
> (but this was not my original stage as i have a number
of layers on that one).
Right - this is expected because yoyu are now inside the
movie clip timeline - not the button timeline.
> When i double clicked on it again, it brought up the
right headings (top, down,
> over, etc),
Right - because by double clicking the button symbol you were
then brought to "edit mode" for the
button symbol.
but there were about 5 layers that showed the different
layers for
> the original button.
Huh? What "5 layers"? What do you mean "original" button -
per your description there has only ever
been 1 button you have been working with.
> I think i have to add the button to each of the
headings, bt there is no room,
Lost you completely now - what do you mean add the button to
each heading? I have no clue what you mean.
> as when i did it before, there was only one layer for it
and i had to insert
> the key frames myself.
Still losing you here.
> I then added a behaviour to it using the Behaviours
pannel, (selected
> movieclip, then 'go to and play....') and it appears in
the behaviours pannel.
> But when i got to Play Movie, although the curser
changes into a hand, the
> button does not work.
That's because you are applying a behavior for a button to a
movie clip instead.
I think you went wrong when you converted the button to a
movie clip - i have no idea why you did
that or why to think your button needs to be in a movie clip.
>
> Hope that can help you with what i've done and you can
tell me where i've gone
> wrong.
>
I just think you don't understand how timelines, symbols or
buttons work yet in flash.
1. drag a button to the stage.
2. select it and open the Behaviors panel (dont double click
it to edit it).
3. add your actions.
4. test movie.
(no need for a movie clip here.
-chris

Problem with Refine Mask (Edge) Tool (+Refine Radius Brush)

Hey all,
I'm a teacher at Vancouver Film School in Canada.
Having some major problems with the Refine Mask tool in Photoshop CS5 (+5.1)
Especially when using the Decontaminate colours check box.
it eliminates smart objects
it leaves artifacting (especially in areas where I use the Refine Radius tool.) see posted image
these are consistent problems.When I uncheck decontaminate colours, the artifacting doesn't happen and smart objects stay in tact.
Is anyone else having problems with this?
Also having this problem
sometimes the radius will only increase INSIDE the selection and not in the center like it should. This is the most frustrating because it's not consistent but happened on 4 systems yesterday while teaching a class.

Hi Notsosimpleton,
You most likely already know this stuff.
I have been experimenting with two images with Photoshop. I agree that masking is a non destructive method of editing your image, but when you choose to use the decontaminate color option the refine edge feature automatically changes from new mask to new layer with mask indicating that the decontamination is destructive.
Smart objects by there nature prevent pixel level modification. From my (general) understanding of the decontaminate color feature, Photoshop is attempting to replace edges which contain colors from the non selected area with colors from the selected area, in turn your smart object needs to be rasterized to allow this process to take place. This then creates artificating because Photoshop is painting on to edges with color, leaving undesired rubbish around your selection. The majority of this is hidden by the mask.
Changing your selection method or using clone stamp with the blend mode set to color and replace edges using selections from inside the selection area. Affectively doing what Photoshop would do, but manually.
I am not sure this really helps?, but I always try using other masking methods to achieve the result i.e. channels, paths. I would be happy to experiment and share the results.

Problem with the button

Hi my name is Lior Sassi from Israel. I bought an iPhone 5 in Amsterdam. Now I have a problem with the button on the iPhone and I still have a guarantee. Where can I fix the problem?

The Warranty is only valid in the Original Country of Purchase.
For Troubleshooting your button issue... See Buttons and Switches here...
http://support.apple.com/kb/TS2802

Problem with sleep button

I have problem with sleep button on my hp pavilion dv6-1354us When i press FN + F5 nothing happend. I reinstalled drivers for hp quick lunch buttons but the same problem.. Any solutions ? Thanks.

The operations of FN functions mainly based on the intrinsic working between the drivers and System BIOS.
If you already upgraded the Quick Lanuch Driver, then you may want to upgrade your System BIOS to the latest one in HP website to see if it can resolve the problem for you.
However, you need to be careful while upgrading your System BIOS.

Hey everyone I am haveing problems with Flash Button

Hello everyone I am new here so I am haveing problems with
Flash Button because of the html address it wont go to the address
that i put into it it keep going to
http://www.faithdesigner.net/www.faithdesigner.net/pricing.html/www.faithdesigner.net
why does it do that? this is a link problem issue with flash
button in macromedia dreamweaver 8?
someone please help me?
Jeremy

>
http://www.faithdesigner.net/www.faithdesigner.net/pricing.html/www.faithdesig
> ne
> r.net
In the dialog box for the Flash Button, in the link box, put
the full
absolute path if an external page. Including the
http:// part.
http://www.example.com/page.html
for pages inside your site- use the browse to file icon, and
use a relative
path.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Problem with Masked Buttons

As it stands i have a button called Start, when this button is hovered over, three more buttons appear at its side (all masked)
I'm having trouble actionscripting the buttons, ive tried putting the AS on the button
on(release){
gotoAndStop(2);
seen as everything so far is done on the first frame on various layers i just need it to go to frame 2. but this doesn't work.
the code that's on the start button is
on(rollOver){
Startmenu.play();
Start menu is the invisible movieclip which has the masks and rollout buttons in.
anyone got any ideas?

start button does overlay the other buttons and it is on the main timeline. as is the movieclip which activated the 3 buttons when the start button is rolled over with the mouse.
Date: Fri, 26 Mar 2010 08:39:42 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Masked Buttons
does your start button overlay the other buttons?
is your start button on the main timeline?
is the movieclip with the 3 buttons on your main timeline?
does that movieclip respond to the mouse (and thereby intercept mouse events intended for the buttons it contains)?
>

Problem with the buttons

Recently I have problems with some buttons on my 8800.
When I hit the trackball the BB writes "Uo". When I hit the 'back' button it writes "Hl". Also the menu button does not what he has to do. Anyone the same problem or even better a solutions for this problem?
Bye, Ben

You are not alone. the same thing happened to me today with my 8820.
it worked fine for one call then i hung up and tried looking up a number. Track ball dosn't work at all, their isnt even a backlight on the trackball. the back button types in hl. i also think my e button is enter but i dunno. that one seems on and off.
Edit. I found this:
http://www.blackberryforums.com/general-8800-series-discussion/114752-blackberry-button-problem.html
Message Edited by jasgud on 07-27-2008 08:25 PM

Problem with refresh button in tool bar in ALV

Similar Messages

Maybe you are looking for