Problem with RFC Communication in BPM
Hi,
I'm again facing problem with transfer of
File->RFC->File scenario.The error in sxmb_moni is given below .
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_COMMUNICATION_FAILURE</SAP:Code>
<SAP:P1>Error opening an RFC connection.</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>"COMMUNICATION FAILURE" during JCo call. Error
opening an RFC connection.</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can anyone help me in fixing out this problem.
Regards,
Prashanth K.R,
Hi Prashant,
Just click onto your namespace and verify the details given in the "Connection data for import from SAP system". Check whether its matching the system from where you have called the RFC.
hope this will help u.
regards
divya
Message was edited by: Divya Nambiar
Similar Messages
-
Problem with RFC-Call within BPM
Hello Experts,
I am developing a scenario in which I call an rfc-function-module for saving information from an incoming xml which will be transmitted as Idoc to another SAP System.
The Idoc transmission is doing properly. But the RFC-Call I try to do always ends with a red flag. Error-Message: message has error status on outbd. side at the Process-Engine.
Can someone help solving that problem?
Thanks in advance.
Regards, AlexanderHi Rajhans,
1) The user mentioned in the RFC communication channel is having the authorization.
Yes, he have the authorizations.
2) Go to Communication channel monitoring and check what error you are getting for the communication channel is showing.
There is an error about the FileSenderChannel. Error: java.lang.NullPointerException.
3) Check whether the RFC created at abap stack is remote enabled or not.
The function module is remote enabled. -
Problem with RFC exception in BPM
Hi,'
I have created control step for RFC exception. Assigned the alert catagory and given alert message.
i have below steps:
Transformation-control-send RFC-cancel process.
while trying to test i changed ip address of rfc channel and tested but i am not receiving any alert but messages are getting stucked in BPM with error -
permanent error in message proccessing
could you please suggest how to trigger rfc execptionSuggestions..
refer BPMPatternReqRespTimeout for triggering exception.
Basically you might change the sequence of steps as follow
Create Block with deadline branch where you use control step to trigger exception and have another branch exception handler and in that branch you have transformation and senderror. This will help. -
Problem with RFC connection - tp program not registered
Hello everyone
recently there has appeared a problem with the RFC connection on our system - we received the following set of messages:
Trace file opened at 20101221 130738 Central European Standard Time, SAP-RE
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Tp program is not registered.
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: xxx(Client: 100)
Destination: SIDRFC_IFSAPHRCZPKCP (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Program transakcji nie jest zarejestrowany
DEST =SIDRFC_IFSAPHRCZPKCP
HOST =%%RFCSERVER%%
PROG =IFCZPKCP
GWHOST =ssapprod
GWSERV =sapgw21
I tried to register program with a command:
rfcexec -aIFCZPKCP -gssapprod -xsapgw21
but with no success - the program didn't appear on the list of logged clients on the system in gateway monitor. Frankly speaking we do not know now what else we can do - please help!
We have ECC 6.0 (SAP_BASIS 700 SP18) on Windows Server 2003 R2 x64.
Thanks in advance for any help.
Regards
PeterHi Salim
thanks for your reply.
./rfcexec -a(PROG_ID) -gssapprod -xsapgw21 &
The syntax you're providing refers to UNIX systems, but I did similar thing on our Windows system - I tried all of the following methods (unfortunatelly without success):
rfcexec -a(PROG_ID) -gssapprod -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod -xsapgw21
rfcexec -a(PROG_ID) -gssapprod.domain -xsapgw21
full_path_to_rfcexec.exe -a(PROG_ID) -gssapprod.domain -xsapgw21
Can you advise me what to do now?
Thanks
Piotr -
Problem with RFC for Risk Terminator - GRC 5.2 SP12
We are having a problem with the RFC connection for Risk Terminator in one of our SAP environments. It is working in our 'DV3' environment, but not in our 'RT3' environment. Everything is set up just the same in both environments and all SAP Adaptors show green.
This was working in RT3 when we first upgraded to GRC 5.2 last November, but it now gives me an error when I do an update with PFCG and it calls RT. The error message and our Basis support group both say the RFC needs to be 'registered', but our SAP Support contact during our upgrade said it does not, and I can't find any documentation that says this is required also. Plus it was working before even though it was unregistered.
What is causing this problem and how do I resolve it?
Also, if these RFCs do not have to be registered, is there some documentation that states this that I can show to our Basis group?
Thanks.What about the question of the RFC needing to be registered? This is the solution our Basis group thinks is required, so it will be hard to get them to do anything else until this issue has been addressed.
Thanks. -
Problem With Receiver Communication (File Adapter)
Hi,
My SAP XI Version is 3.0 with Service Pack 7,I have a strange problem,
I have a flat file coming from Unix system,I need to convert this into XML and put a copy in the Archive mode and send the XML file,getting it converted into flat file format send it to the receiver.Here I have to do the content Conversion,So,I have done content conversion while configuring Sender and Receiver Communication Channel.
I am using NFS as Transport Proctocol.So, everthing was fine when i run the scenario,after activating.The Sender communication Channel is Archiving the files.But I am unable to see any file with receiver communication channel.
So,for this I have checked up with Adapter monitoring in Runtime Workbench. In my File Adapter My Sender as well as Receiver Communication Channels are in Green.They are mentioning that Sender Communction is sucessful and
RECEIVER COMMUNICATION IS Sucessful but no messages processed.
Can any one suggest what to do now.Everything is fine with Content conversion and Unix System.But my receiver is not receiving any messages.
Should any OSS notice or patch work needs to be applied.
Thank You,
KishoreJ.Hi Kishore,
I Guess you should first see if the file is being picked......for that do the following.
While configuring your Sender File Adapter, let the mode be DELETE. This way, we will know if the file is being picked by the File adapter. The file will be deleted and you can be sure that it has been picked up.
Next, look into the RWB--> FILE ADAPTER and see the log of the file adapter
and also, you can see the flow of your message in the integration engine in SXMB_MONI.
Ans still if your message is not showing up in SXMB_MONI, please do as explained below.
Increase logging and trace level in:
SXMB_ADM -> Integration Engine Configuration -> Specific Configuration
Also create entries as follows in it:
LOGGING = 1
LOGGING_SYNC = 1
TRACE_LEVEL = 3
TRACE_LEVEL_PROPAGATION = 1
Also refer XI: I cannot see some of my messages in the SXMB_MONI
Regards,
Abhy -
Hi GURU,
I have a problem with the record of RFC destination.
When i created RFC destination TCP/IP when i made the tests, it`s ok.
But when i used this rfc destination in a function of ABAP. I have an error. The error is:
RfcExecProgram'#Win32 error 2: The system cannot find the file speci
Can you help me??
What should I do to run properly?
Thank for all.
regards,
RAFAHi,
Even I am also new to SAP , but I have little knowledge about RFC, try to create your RFC of type 3 (ABAP type ), then if you use this RFC , I hope no problem will come if the authorization details and IP /Host name of the destination system are perfect.
also Please suggest me why ( when ) we use TCP /IP type of RFCs -
Problem with RFC INTEGRATION_DIRECTORY_HMI
Hello !
I have one problem with the RFC connection INTEGRATION_DIRECTORY_HMI.
When I test it, SAP ask me in a pop-up window an user/password.
Im sure that SAP shouldnt ask me another user/password like I fill it (XIISUSER) in the definition of the RFC destination.
Coul someone help me ?
Thanks in advanceHi,
this problem are strang. I also have this problem with my
test installation. Even when i try the trick from Lui it
doesn't work in my case. The popup screen still appeare.
I futhermore have problem with the abap cache refresh in
full mode where i describe in another topic. I would also
interested how to get rid of this problem.
For Martial:
did you install a new XI-System with NW04-SR1 on windows
e.g. windows 2000 Server? Did you have also the cache problem on the abap side?
regards,
Ly-Na Phu
Message was edited by: Ly-Na Phu -
BT Infinity modem problem with Kelly Communication...
Hi all,
I am using Unlimited BT Infinity 1 (just for one month). I just received a call from a mobile phone regarding my broadband modem. He said he is from Kelly and there is something wrong with my broadband equipment. He is going to send an engineer to my home to change something (like taking the modem back?).
I searched on the forum and found a post about "Infinity Modem Swap & Kelly Communications" but that's about 1 year ago. In this post (http://bt.custhelp.com/app/answers/detail/a_id/37051/) it said:
"We've been working with Kelly Communications to replace the Openreach modems for some BT Infinity customers. We've now finished this work."
anyone else gets the call? not sure if it is a genuine contacts because they didnt even veryfy any account detail (but he said he knows my address).
Cheers
ChrisIt could be that they have used an old modem and are going to swap it.
You could try calling BT to see if the know anything about it.
If they do come to your house make sure you verify their details and check ID card and stay with them when they change the modem over. If at all in doubt don't let them in.
If they telephone again and ask to check your computer do not let them. They have no need to do that. -
Problems with RFC transport confirmation in a BPM
Hi everyone.
I have an interface that is stopped now. The problem is that XI tried to send a RFC and the R3 backend is down.
Now i have this interface waiting for a transport confirmation (since last sunday morning).
is there any way to 're-send' the RFC or 'unlock' this situation?
Regards.Hi.
Status of the RFC is ok. At the right side of the status, i have a green '?' due to no-confirmation os the transport of the RFC. In the bpm i have set the property 'transport acknowledge' in every RFC i try to send to R3 backend. XI is waiting for the ACK but no ACK is arriving so i would like to 're-send' angain teh RFC.
Is that possible?
Regards -
Problem with RFC and empty table
Hi,
I have a problem using and RFC function module. The problem is that the RFC returns a table type, but even though the table is emtpy the tag is returned. I have this target structure who has a required subsstructure:
Input:
<RFC_function_module>
<customers>
<customer1>
<table1> (0..1)
<item> (0..Unbounded)
<salesorder>
<customer2>
<table1>
<item>
<salesorder>
<table2>
<item>
<accountdoc>
result:
<customers>
<list1> (0..1)
<table1> (1..Unbounded)
<list2> (0..1)
<table2> (1..Unbounded)
The problem is that if i just do at simpel mapping the mapping returns error because the missing table2 in the result. Then i have tried with an Exists function but it seems like the mapping program searches the hole file for just one occurences. Not record by record.
Do anyone understand my problem an has a solution?
/JakobOK - what do you mean by to level of mapping? Mapping to an "internal" structure first and then for the final output?
The reason i do not whant to change the External defintions is because of changes. If the ones who have designet the external defintions ie. adds a field or something like that, we should remember to change this kind of thing before updating.
Jakob -
Problem with socket communications
I am trying to put together a client server socket communication pair.
I have one application that runs in the background acting as a server and another that can be started and stopped that acts as a client.
I can start the server and create a server socket with no problem.
I can start the client and it connects to the server.
The server acknowledges the connection and appears to go into a blocking state waiting for the client to send another message.
The server blocks at the line
parent.logit("Waiting for message from EVR..... ");
The problem is that when the client sends another message, the server doesn't hear it.
I am not sure if the problem is with the client or server communication code.
If anyone out there is a socket communication guru, I would appreciate it if you could tell me what I am doing wrong.
Thanks
Server code:
import java.io.*;
import java.net.*;
public class EVRServer
extends Thread
EVRDataLoader parent = null;
ServerSocket serverSock = null;
Socket clientSock = null;
BufferedReader reader = null;
BufferedWriter writer = null;
int evrPort = 0;
int retryLimit = 10;
int retryCount = 0;
boolean alive = false;
boolean killSocket = false;
boolean evrConnected = false;
boolean retry = true;
EVRListener evrListener = null;
//=============================================================================
// Full constructor
//=============================================================================
* Full constructor.
* @param dl DataLoader - Parent application
* @param port int Socket port
public EVRServer(EVRDataLoader dl, int port)
parent = dl;
evrPort = port;
//=============================================================================
// Run method - Main thread executed by start() method
//=============================================================================
* Main thread executed by start() method
public void run()
while (retry)
if (retryCount > retryLimit)
retry = false;
parent.logit("Retry count = " + retryCount);
// Create new server socket connection
if (serverSock == null)
try
serverSock = new ServerSocket(evrPort);
parent.logit("Created Server Socket for EVR on port " + evrPort);
alive = true;
killSocket = false;
evrConnected = false;
catch (Exception e)
parent.logit(
"ERROR - Could not create Server socket connection for EVR: " +
e.toString());
killSocket = true;
alive = false;
// Create new client socket connection
if (clientSock == null)
try
parent.logit("Waiting for EVR to connect");
clientSock = null;
clientSock = serverSock.accept();
retryCount = 0;
evrConnected = true;
killSocket = false;
parent.logit("EVR connected on server Socket Port " + evrPort);
catch (Exception e)
parent.logit("ERROR - Error accepting EVR connection: " + e.toString());
killSocket = true;
try
reader = new BufferedReader(new InputStreamReader(
clientSock.getInputStream()));
writer = new BufferedWriter(new OutputStreamWriter(
clientSock.getOutputStream()));
parent.logit( "Created reader "+reader);
parent.logit( "Created writer "+writer);
catch (Exception e)
parent.logit(
"ERROR - creating reader or writer to EVR: " + e.toString());
killSocket = true;
int nullCount = 0;
while (killSocket == false)
try
parent.logit("Waiting for message from EVR..... ");
// sendMessage("Data Controller connected on port " + evrPort);
String s = reader.readLine();
parent.logit("EVR - Received message: " + s);
if (s != null)
parent.processEvrMessage( s);
else
sleep(1000);
nullCount++;
if (nullCount > 10)
parent.logit("Exceeded retry limit: ");
killSocket = true;
catch (Exception ex)
parent.logit("Error Reading from EVR: " + ex.toString());
killSocket = true;
parent.logit( "After while loop");
evrConnected = false;
try
retryCount++;
parent.logit("Closing EVR connection. ");
reader.close();
writer.close();
clientSock.close();
writer = null;
reader = null;
clientSock = null;
try
sleep(1000);
catch (Exception ee)
parent.logit("Error after sleep " + ee.toString());
catch (Exception e)
parent.logit("Error closing EVR server socket");
//=============================================================================
// Call this method to kill the client socket connection.
//=============================================================================
* Call this method to kill the client socket connection.
public void killConnection()
killSocket = true;
//=============================================================================
// Return RTM connected state
//=============================================================================
* Return RTM connected state
* @return boolean - Returns true if RTM is connected to server, false if not.
public boolean isRtmConnected()
return evrConnected;
//=============================================================================
// Returns state of server socket.
//=============================================================================
* Returns state of server socket.
* @return boolean - Returns true if server socket is enabled, false if not.
public boolean isServerSocketAlive()
return alive;
//=============================================================================
// Send a message to the client socket.
//=============================================================================
* Send a message to the client socket.
* @param msg String - Message to send.
* @return boolean - Returns true if message sent OK, false if not.
public boolean sendMessage(String msg)
parent.logit(" In EVR Server - Send Message - got message: " + msg);
if (evrConnected)
try
parent.logit("Sending message to EVR: " + msg);
writer.write(msg + "\n");
writer.flush();
return true;
catch (Exception e)
parent.logit("ERROR - Error sending message to EVR: " + e.toString());
return false;
else
parent.logit("EVR not connected, cannot send message: " + msg);
return false;
}Client code:
package evrsimulator;
import java.net.*;
import java.io.*;
class PortConnector
extends Thread
ServerSocket serverSock = null;
boolean isIP = false;
InetAddress addr = null;
Frame1 parent = null;
byte[] rawIP;
// String initialMsg = "";
public PortConnector( Frame1 f )
parent = f;
// This method is called when the thread runs
public void run()
if ( parent.hostName.indexOf( "." ) > 0 )
isIP = true;
byte[] rawIP = parent.getRawIP( parent.hostName );
try
System.out.println( "Connecting to host " +
parent.hostName + " on port " +
parent.socketPort );
if ( isIP )
addr = InetAddress.getByAddress( rawIP );
else
addr = InetAddress.getByName( parent.hostName );
System.out.println( "Inet address = " + addr );
SocketAddress sockaddr =
new InetSocketAddress( addr, parent.socketPort );
// Create an unbound socket
parent.client = new Socket();
// This method will block no more than timeoutMs.
// If the timeout occurs, SocketTimeoutException is thrown.
parent.client.connect( sockaddr, parent.socketTimeOut );
parent.socketOut =
new BufferedWriter( new OutputStreamWriter(
parent.client.getOutputStream() ) );
parent.socketIn = new BufferedReader( new InputStreamReader(
parent.client.getInputStream() ) );
parent.localName = parent.localName +
parent.client;
System.out.println( "Parent socketOut = "+parent.socketOut);
System.out.println( "Parent socketIn = "+parent.socketIn);
catch ( UnknownHostException uhe )
System.out.println( "Unknown Host - " + uhe.getMessage() );
catch ( SocketTimeoutException ste )
System.out.println( "Socket time out - " + ste.getMessage());
catch ( IOException ioe )
System.out.println( "IO exception - " + ioe.getMessage() );
// Listen on socket for message from host - thread should block.
parent.portConnected = true;
while ( parent.portConnected )
try
String msg = parent.socketIn.readLine();
System.out.println( "Message from Host: " + msg );
System.out.println( "Message from Host: |" + msg + "|" );
if( msg.length() > 2)parent.processMessage( msg );
catch ( IOException ioe )
System.out.println( "Exception creating server socket." );
try
System.out.println(
"PortConnection - Closing socket and IO connections" );
parent.socketIn.close();
parent.socketOut.close();
parent.client.close();
parent.clockRunning = false;
if( parent.heartBeating) heartBeat.interrupt();
catch ( IOException ioex )
System.out.println( "Exception closing socket." );
}Your first problem is that you keep closing and recreating the ServerSocket. Do this once only in the lifetime of the server.
This is such a basic error that I haven't read the rest of the code. Before you go any further I suggest you read the Custom Networking trail of the Java Tutorial. -
Facing a problem with RFC Call receiver error while importing the table sap sandbox
Hi All,
I am trying to import a table from sap sand box . while importing it is showing below error..
RFC CallReceive error <Function DDIF_FIELDINFO_GET: RFC_ABAP_EXCEPTION-(Exception_Key: NOT_FOUND, No active nametab exists for /BIC/OHZ_ISP_SCX)[SAP NWRFC 720][SAP Partner 731 ][SCX][ics106046124][APOBODS][4103]>.
Please suggest me how can i overcome this problem ??Hi Kishore,
Can you quickly check with your SAP Basis Team whether they have installed necessary functions related to BODS on the SAP Application server.
Please check Supplement for SAP Guide
Regards
Arun Sasi -
Collection problem with RFC function module WSDL.
Hi.
I have developed an RFC function module in a SAP system version 4.7 (WAS 620). This FM has 2 table parameters. I have no problem when I see the WSDL in the SAP Web Service Browser.
Another team is trying to consume this RFC FM as a web service from a Java application but they say they can't see the table parameters as collections.
Here is the WSDL of the FM, the table parameters are T_MOVIM and T_ERROR:
<?xml version="1.0" encoding="UTF-8" ?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="urn:sap-com:document:sap:rfc:functions" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="urn:sap-com:document:sap:rfc:functions">
<types>
<xsd:schema targetNamespace="urn:sap-com:document:sap:rfc:functions">
<xsd:element name="ZMMFUSAPTK_0001">
<xsd:complexType>
<xsd:all>
<xsd:element name="GENIDOC" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="T_ERROR">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="T_MOVIM">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:element name="ZMMFUSAPTK_0001.Response">
<xsd:complexType>
<xsd:all>
<xsd:element name="CODRET">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="T_ERROR">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0012" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="T_MOVIM">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="item" minOccurs="0" maxOccurs="unbounded" type="s0:ZMMTASAPTK_0011" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:all>
</xsd:complexType>
</xsd:element>
<xsd:complexType name="ZMMTASAPTK_0011">
<xsd:sequence>
<xsd:element name="REFERENCIA" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="FECHACONT" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="8" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="FECHADOC" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="8" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CODMOV" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="2" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NROPLAN" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="12" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NROCOMP" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CLASEMOV" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CENTRO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ALMACEN" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MATERIAL" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="5" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="LOTE" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CANTIDAD" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="15" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MOTIVOMOV" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CENTROREC" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ALMACENREC" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="4" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CENTROCTO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="ORDEN" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="12" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="TIPOSTK" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="1" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="NROPEDIDO" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CODCISTERNA" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="50" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="ZMMTASAPTK_0012">
<xsd:sequence>
<xsd:element name="REFERENCIA" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="10" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="CODERR" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="3" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
<xsd:element name="MSJERR" minOccurs="0">
<xsd:simpleType>
<xsd:restriction base="xsd:string">
<xsd:maxLength value="100" />
</xsd:restriction>
</xsd:simpleType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
</types>
<message name="ZMMFUSAPTK_0001Input">
<part name="parameters" element="s0:ZMMFUSAPTK_0001" />
</message>
<message name="ZMMFUSAPTK_0001Output">
<part name="parameters" element="s0:ZMMFUSAPTK_0001.Response" />
</message>
<portType name="ZMMFUSAPTK_0001PortType">
<operation name="ZMMFUSAPTK_0001">
<input message="s0:ZMMFUSAPTK_0001Input" />
<output message="s0:ZMMFUSAPTK_0001Output" />
</operation>
</portType>
<binding name="ZMMFUSAPTK_0001Binding" type="s0:ZMMFUSAPTK_0001PortType">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http" />
<operation name="ZMMFUSAPTK_0001">
<soap:operation soapAction="http://www.sap.com/ZMMFUSAPTK_0001" />
<input>
<soap:body use="literal" />
</input>
<output>
<soap:body use="literal" />
</output>
</operation>
</binding>
<service name="ZMMFUSAPTK_0001Service">
<documentation>SAP Service ZMMFUSAPTK_0001 via SOAP</documentation>
<port name="ZMMFUSAPTK_0001PortType" binding="s0:ZMMFUSAPTK_0001Binding">
<soap:address location="http://dbades00.bue.bemberg.com.ar:8002/sap/bc/soap/rfc" />
</port>
</service>
</definitions>
Should I change something in the definition of the parameters of the FM? or the problem is with the parsing process on the other system?
Thanks in advance.
Fabian.Welcome to SDN.
I am not sure about this particular issue, but i have used WSDL from WAS6.20 system in MS Office infopath to consume webservice where we have had table parameters without any issue.
may be try with office infopath to make sure that the problem is with the WSDL or with the java application.
Regards
Raja -
Problem with XSLT Transformation on BPM
Hi there,
I have a 1:N File --> Idocs Scenario with BPM, Inside the BPM i have an XSLT Transformation that has a problem i cant figure out, basically this XSLT Groups the file structure like this:
<File> * <Shipments>
<Route> * <Route>
<Id>1</Id> * <Id>1</Id>
<delivery>1</delivery> * <delivery>1</delivery>
</Route> * <delivery>2</delivery>
<Route> * </Route>
<Id>1</Id> * <Route>
<delivery>2</delivery> * <Id>2</Id>
</Route> * <delivery>3</delivery>
<Route> * <delivery>4</delivery>
<Id>2</Id> * </Route>
<delivery>3</delivery> * </Shipments>
</Route> *
<Route> *
<Id>2</Id> *
<delivery>4</delivery> *
</Route> *
</File> *
It's supposed to generate 1 Route Segment for each disctint Route Id on the Source file, it has always worked fine as we ran several tests before going into production system, but now, sometimes it misses a few routes for example the output will be 25 different Routes for a source file that 28, or 2 routes from a file that as 3.
I have tested the XSLT on the repository and it works fine all the time, same thing when using xml spy, i always download the payload i get from the file adapter, i got a source file from PRD that has 28 routes and i ran the whole scenario on QAS and it generated 12 routes only, im about to open an OSS message but first i wanted to know if anyone has seen something like this, thanks in advance for all the help you guys can provide.
Best Regards,
Roberto.
p.s. i can send the XSL if needed or anything just ask for it.Hi,
Basically because i have to do 2 transformations, first i run the XSLT to group all the deliveries and such, and then i do a graphic mapping to split it into single Shipment Idocs, i dont know how to group by id on graphical mapping..., anyway i don't think the fact that im using BPM would finally alter the xslt result,
Regards,
Roberto.
Maybe you are looking for
-
Connecting Powerbook to External LCD Monitor
The D-BUS port on the external LCD monitor is a female port, so is the VGA port of the DVI Adapter, How can I connect these 2 if both are female ports, what do I need???
-
Hi, I have setup vendor partner function VN to be transferred to GTS. Is there any way, we can control transfer of vendors by account group? Actually, I don't want all the vendors to be transferred to GTS. I just want only vendors of speciifc a/c gro
-
Digital camera not recognised on iMac
Hi Yesterday I connected my canon digital ixus camera to my iMac and copied over some photos, via usb, no problem. Today I am trying to do exactly the same but the camera is not seen at all. Nothing has changed, and I have used the same procedure as
-
SPS 18 Installation fails while asking for Java Crypthography Extension
Hi @ all, some weeks ago we deployed the file "tc_sec_java_crypto_signed_fs_lib.sda by the SDM. But we didn´t enabled strong encryption in the portal. Now, i want to update my portalstack from SPS 14 to SPS 18 and while i update J2EE Sapinstaller ask
-
Photoshop CS6 on Mac OSX 10.9.3 NO longer working!
Since updating the iMac from OSX 10.9.2 to OS10.9.3 Photoshop CS6 is longer loading. Is there an update?