Problem with RSCRM_BAPI (extraction to Fixed Lenght txt file)
Hi Experts,
I have a question about a RSCRM_BAPI limitation:
I want to extract a Query, using this transaction, to a fixed lenght .txt file. The query has a tabular structure like this:
CHARACT1 | CHARACT2 | CHARACT3 | CHARACT4 | KEYFIG_MONTH1 | KEYFIG_MONTH2 | .... | KEYFIG_MONTH12.
so i have a tabular structure with some CH and a KF repeated for the 12 month of the year.
The problem is that the fixed lenght .txt file extracted with RSCRM_BAPI stops to the month 11, month 12 is discarded. If i try to extract a .csv file with the same query all the 12 month are included in the file.
Question: Is it possible that RSCRM_BAPI has a row lenght limitation considering the fixed lenght .txt file?
Many thanks in advance.
Fabio
How did you sechudle the Query/Report Using BAPI, i'm having similar Problem. Please Can you help me out.
My problem is , i have a query which is schedule for every month 2 wed and a bapi is associated to The query.
for some reason's the query is not working properly .
Can you please help.
Similar Messages
-
Problem with RSCRM_BAPI
Hi Experts,
I have a question about a RSCRM_BAPI limitation:
I want to extract a Query, using this transaction, to a fixed lenght .txt file. The query has a tabular structure like this:
CHARACT1 | CHARACT2 | CHARACT3 | CHARACT4 | KEYFIG_MONTH1 | KEYFIG_MONTH2 | .... | KEYFIG_MONTH12.
so i have a tabular structure with some CH and a KF repeated for the 12 month of the year.
The problem is that the fixed lenght .txt file extracted with RSCRM_BAPI stops to the month 11, month 12 is discarded. If i try to extract a .csv file with the same query all the 12 month are included in the file.
Question: Is it possible that RSCRM_BAPI has a row lenght limitation considering the fixed lenght .txt file?
Many thanks in advance.
Fabio
Message was edited by: Fabio CappabiancaHow did you sechudle the Query/Report Using BAPI, i'm having similar Problem. Please Can you help me out.
My problem is , i have a query which is schedule for every month 2 wed and a bapi is associated to The query.
for some reason's the query is not working properly .
Can you please help. -
Problem with PDF extract in a report
Hi guys,
We are facing a peculiar problem with PDF extract in a report. When we run a report and export PDF , all the records in the result set are populated in the PDF. however, if I navigate away from the report and return back to the same report, and click on export pdf (with the result set already populated) i get a blank PDF document without any records. If i run the report again and then export the PDF it works fine.
Export excel works fine for all cases.
I am assuming it has got something to do with the way the system handles the cache for PDF export.
I also found that this occurs only when we have a value list filter with "none" set as default,and in this case, initially on opening the report for the first time the query does not get executed automatically.
Any help on this would be highly appreciated.
Thanks and Regards,
immanuelHi Immanuel,
Have you tried clearing the cache? My guess is, it is probably a defect.
Regards,
Vikram -
Error with the data format in the TXT file, sending as an Email attachment
Hi all,
I have an problem in the data formating in the TXT file while sending as an attachment via an email by using the FM "SO_DOCUMENT_SEND_API1".
For eg:
The data in the TXT file is looking like as follows:
0 0 0 0 2 L O U D S P E A K R O T H E R 3 8 W h i t e 0 0
0031 L O U D S P E A K R O T H E R 3 8 Black 0 000
38 L O U D S P E A K R O T H E R 3 8 Brown 0 00040
L O U D S P E A K R O T H E R 3 8 Brown 0 00042
and so on
But it should come as :
0 0 0 0 2 L O U D S P E A K R O T H E R 3 8 W h i t e
0 0 0031 L O U D S P E A K R O T H E R 3 8 Black
0 00038 L O U D S P E A K R O T H E R 3 8 Brown
0 00040 L O U D S P E A K R O T H E R 3 8 Brown
All the internal tables are correctly filled.
The code is as follows:
gwa_objtxt = 'Please find attached DATA EXTRACT Sheet'.
append gwa_objtxt to git_objtxt.
describe table git_objtxt lines gv_cnt.
clear git_doc_data.
read table git_objtxt index gv_cnt.
git_doc_data-doc_size = ( gv_cnt - 1 ) * 255 + strlen( gwa_objtxt ).
git_doc_data-obj_langu = sy-langu.
git_doc_data-obj_descr = lv_mtitle.
append git_doc_data.
clear git_packing_list.
refresh git_packing_list.
git_packing_list-transf_bin = space.
git_packing_list-head_start = 1.
git_packing_list-head_num = 0.
git_packing_list-body_start = 1.
git_packing_list-body_num = gv_cnt.
git_packing_list-doc_type = 'RAW'.
append git_packing_list.
Clear : gv_cnt.
Describe table git_objbin lines gv_cnt.
git_packing_list-transf_bin = 'X'.
git_packing_list-head_start = 1.
git_packing_list-head_num = 1.
git_packing_list-body_start = 1.
git_packing_list-body_num = gv_cnt.
git_packing_list-doc_type = 'TXT'.
git_packing_list-obj_descr = 'ATTACH.TXT'.
git_packing_list-obj_name = 'book'.
git_packing_list-doc_size = gv_cnt * 255.
APPEND git_packing_list.
clear git_receivers.
refresh git_receivers.
git_receivers-receiver = gv_eid.
git_receivers-rec_type = 'U'.
append git_receivers.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = git_doc_data
PUT_IN_OUTBOX = 'X'
COMMIT_WORK = 'X'
TABLES
PACKING_LIST = git_packing_list
CONTENTS_BIN = git_objbin
CONTENTS_TXT = git_objtxt
RECEIVERS = git_receivers
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.please give the code of
contents bin = git_objbin " how this is getting populated.
0 0 0 0 2 L O U D S P E A K R O T H E R 3 8 W h i t e <b>0 0</b>
0031 L O U D S P E A K R O T H E R 3 8 Black
0 000
38
from this im not able to understand is this over population or concatenation problem
y dont u make a append to the final table
like
data : begin of itxt occurs 0, ,
s1(132) type c ,
end of itxt.
loop at itab.
itxt-s1+0(4) = itab-f1.
itxt-s1+4(6) = itab-f2.
itxt-s1+10(8) = itab-f3.
itxts1+18(4) = itab-f4.
append itxt.
clear itxt.
endloop.
exchange this to the contents bin of hte Fm .
regards,
vijay.
can u please mail the text file and the expected o/p to my mail id [email protected] so that i can see the same from the data provided i m not able to check the result properly . -
I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh
I have CS4 Ilustrator and am having problems with gradient banding. I'm ripping files through Wasatch 6.7 to a Roland SC-540 printer. Is there a fix for this? Please let me know, I have been asking here for a few days here and no answers yet? Josh
-
I have one problem with Data Guard. My archive log files are not applied.
I have one problem with Data Guard. My archive log files are not applied. However I have received all archive log files to my physical Standby db
I have created a Physical Standby database on Oracle 10gR2 (Windows XP professional). Primary database is on another computer.
In Enterprise Manager on Primary database it looks ok. I get the following message Data Guard status Normal
But as I wrote above the archive log files are not applied
After I created the Physical Standby database, I have also done:
1. I connected to the Physical Standby database instance.
CONNECT SYS/SYS@luda AS SYSDBA
2. I started the Oracle instance at the Physical Standby database without mounting the database.
STARTUP NOMOUNT PFILE=C:\oracle\product\10.2.0\db_1\database\initluda.ora
3. I mounted the Physical Standby database:
ALTER DATABASE MOUNT STANDBY DATABASE
4. I started redo apply on Physical Standby database
alter database recover managed standby database disconnect from session
5. I switched the log files on Physical Standby database
alter system switch logfile
6. I verified the redo data was received and archived on Physical Standby database
select sequence#, first_time, next_time from v$archived_log order by sequence#
SEQUENCE# FIRST_TIME NEXT_TIME
3 2006-06-27 2006-06-27
4 2006-06-27 2006-06-27
5 2006-06-27 2006-06-27
6 2006-06-27 2006-06-27
7 2006-06-27 2006-06-27
8 2006-06-27 2006-06-27
7. I verified the archived redo log files were applied on Physical Standby database
select sequence#,applied from v$archived_log;
SEQUENCE# APP
4 NO
3 NO
5 NO
6 NO
7 NO
8 NO
8. on Physical Standby database
select * from v$archive_gap;
No rows
9. on Physical Standby database
SELECT MESSAGE FROM V$DATAGUARD_STATUS;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC1: Becoming the heartbeat ARCH
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery not using Real Time Apply
MRP0: Background Media Recovery terminated with error 1110
MRP0: Background Media Recovery process shutdown
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 2148
RFS[1]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2384
RFS[2]: Identified database type as 'physical standby'
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 3188
RFS[3]: Identified database type as 'physical standby'
Primary database is in MAXIMUM PERFORMANCE mode
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 3168
RFS[4]: Identified database type as 'physical standby'
RFS[4]: No standby redo logfiles created
Primary database is in MAXIMUM PERFORMANCE mode
RFS[3]: No standby redo logfiles created
10. on Physical Standby database
SELECT PROCESS, STATUS, THREAD#, SEQUENCE#, BLOCK#, BLOCKS FROM V$MANAGED_STANDBY;
PROCESS STATUS THREAD# SEQUENCE# BLOCK# BLOCKS
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
ARCH CONNECTED 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 0 0 0 0
RFS IDLE 1 9 13664 2
RFS IDLE 0 0 0 0
10) on Primary database:
select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARCt: Archival started
ARCm: Becoming the 'no FAL' ARCH
ARCm: Becoming the 'no SRL' ARCH
ARCd: Becoming the heartbeat ARCH
Error 1034 received logging on to the standby
Error 1034 received logging on to the standby
LGWR: Error 1034 creating archivelog file 'luda'
LNS: Failed to archive log 3 thread 1 sequence 7 (1034)
FAL[server, ARCh]: Error 1034 creating remote archivelog file 'luda'
11)on primary db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00004_0594204176.001 4 NO
Luda 4 NO
Luda 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00005_0594204176.001 5 NO
Luda 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00006_0594204176.001 6 NO
Luda 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00007_0594204176.001 7 NO
Luda 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\IRINA\ARC00008_0594204176.001 8 NO
Luda 8 NO
12) on standby db
select name,sequence#,applied from v$archived_log;
NAME SEQUENCE# APP
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00004_0594204176.001 4 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00003_0594204176.001 3 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00005_0594204176.001 5 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00006_0594204176.001 6 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00007_0594204176.001 7 NO
C:\ORACLE\PRODUCT\10.2.0\ORADATA\LUDA\ARC00008_0594204176.001 8 NO
13) my init.ora files
On standby db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0\admin\luda\adump'
*.background_dump_dest='C:\oracle\product\10.2.0\admin\luda\bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\luda\luda.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0\admin\luda\cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_unique_name='luda'
*.db_recovery_file_dest='C:\oracle\product\10.2.0\flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='luda'
*.fal_server='irina'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/luda/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=luda'
*.log_archive_dest_2='SERVICE=irina LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=irina'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/irina/','C:/oracle/product/10.2.0/oradata/luda/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0\admin\luda\udump'
On primary db
irina.__db_cache_size=79691776
irina.__java_pool_size=4194304
irina.__large_pool_size=4194304
irina.__shared_pool_size=75497472
irina.__streams_pool_size=0
*.audit_file_dest='C:\oracle\product\10.2.0/admin/irina/adump'
*.background_dump_dest='C:\oracle\product\10.2.0/admin/irina/bdump'
*.compatible='10.2.0.1.0'
*.control_files='C:\oracle\product\10.2.0\oradata\irina\control01.ctl','C:\oracle\product\10.2.0\oradata\irina\control02.ctl','C:\oracle\product\10.2.0\oradata\irina\control03.ctl'
*.core_dump_dest='C:\oracle\product\10.2.0/admin/irina/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_file_name_convert='luda','irina'
*.db_name='irina'
*.db_recovery_file_dest='C:\oracle\product\10.2.0/flash_recovery_area'
*.db_recovery_file_dest_size=2147483648
*.dispatchers='(PROTOCOL=TCP) (SERVICE=irinaXDB)'
*.fal_client='irina'
*.fal_server='luda'
*.job_queue_processes=10
*.log_archive_config='DG_CONFIG=(irina,luda)'
*.log_archive_dest_1='LOCATION=C:/oracle/product/10.2.0/oradata/irina/ VALID_FOR=(ALL_LOGFILES, ALL_ROLES) DB_UNIQUE_NAME=irina'
*.log_archive_dest_2='SERVICE=luda LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES, PRIMARY_ROLE) DB_UNIQUE_NAME=luda'
*.log_archive_dest_state_1='ENABLE'
*.log_archive_dest_state_2='ENABLE'
*.log_archive_max_processes=30
*.log_file_name_convert='C:/oracle/product/10.2.0/oradata/luda/','C:/oracle/product/10.2.0/oradata/irina/'
*.open_cursors=300
*.pga_aggregate_target=16777216
*.processes=150
*.remote_login_passwordfile='EXCLUSIVE'
*.sga_target=167772160
*.standby_file_management='AUTO'
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='C:\oracle\product\10.2.0/admin/irina/udump'
Please help me!!!!Hi,
After several tries my redo logs are applied now. I think in my case it had to do with the tnsnames.ora. At this moment I have both database in both tnsnames.ora files using the SID and not the SERVICE_NAME.
Now I want to use DGMGRL. Adding a configuration and a stand-by database is working fine, but when I try to enable the configuration DGMGRL gives no feedback and it looks like it is hanging. The log, although says that it succeeded.
In another session 'show configuration' results in the following, confirming that the enable succeeded.
DGMGRL> show configuration
Configuration
Name: avhtest
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
avhtest - Primary database
avhtestls53 - Physical standby database
Current status for "avhtest":
Warning: ORA-16610: command 'ENABLE CONFIGURATION' in progress
It there anybody that experienced the same problem and/or knows the solution to this?
With kind regards,
Martin Schaap -
I have a problem with the mac can not read video files with the extension IMOD. How can I solve this problem?
By doing a Google search.
-
Are the problems with Compressor's encoding fixed yet?
Sorry for the slightly vague title but I only use compressor once a year basically, which is after the production of a Christmas show I produce. Last year I upgraded ot Final Cut Studio to do the DVD and got caught out. I encoded using what I thought was the best setting (2 pass variable bit rate) and got jittery encoding. After investigating on this very forum, I found lots of comments about known problems with Compressor's encoding in this setting and ended up re encoding using one pass which was "ok".
I'd rather do the best job I can so the basic question is, "is it fixed yet". Keeping in mind I understand about altering settings so that I can get the time I need onto one disc (110 minutes unfortunately!) What setting will offer me the best possible picture quality, regardless of encoding time, with compressor? Many, many thaks for any advice you regular user can offer!!
Happy Christmas in advance, GarethGareth:
According what was posted in this thread:
http://discussions.apple.com/thread.jspa?threadID=760041&tstart=15
by Brian a lot of problems must be solved using the last 2.3 version.
Hope it helps !
Alberto -
Problems with Delta Extraction for 0CRM_OPPT_H (no data found)
Hi,
I've some problems with the Delta Extraction of the Infosource 0crm_oppt_h (CRM Opportunities Header). After initialization I get no delta data from the CRM system.
What I already did:
Activated 0crm_oppt_h Data Source (checked functionality with rsa3)
Started Info Package (Init) on BW side (worked fine)
Checked the status of the Data Source on the CRM system using BWA7 ("initial upload" is unmarked; "delta active" is marked and what makes me worry is that the column "Queue exists" in <i>unmarked</i>...)
If I change anything (like Phase, Expected Sales Vol.) in the opportunity, the Delta Extraction get no changes.
Could You help me out, please?
Best regards,
Markus Svechi Markus,
try to check oss note 788172
Release Status Released for Customer
Released on 23.03.2005
Priority Correction with high priority
Category Program error
Symptom
No data exists in delta extraction from the CRM server to the BW system for business transactions, if parallel processing is applied as per note 639072. But Data is extracted if parallel processing is switched off.ie. when BWA_NUMBER_OFF_PROCESSES is set to 1,there is data during delta. This applies to the following DataSources:
0BBP_TD_CONTR_1
0CRM_COMPLAINTS_I
0CRM_LEAD_ATTR
0CRM_LEAD_H
0CRM_LEAD_I
0CRM_OPPT_ATTR
0CRM_OPPT_H
0CRM_OPP T_I
0CRM_QUOTATION_I
0CRM_QUOTA_ORDER_I
0CRM_SALES_ACT_1
0CRM_SALES_CONTR_I
0CRM_SALES_ORDER_I
0CRM_SRV_CODES
0 CRM_SRV_CONFIRM_H
0CRM_SRV_CONFIRM_I
0CRM_SRV_CONTRACT_H
0CRM_SRV_PROCESS_H
0CRM_SRV_PROCESS_I
Other terms
DataSources, BWA, initial extraction, delta init, parallel processing, no data in delta.
Reason and Prerequisites
There is an update on the generated delta table which causes data corruption in running delta initializations as the changed delta sets will be deleted with every further update on documents. An open cursor statement is there without fetch data in SMOX3_GET_DATA.
Solution
The problem is solved with the attached corrections.After applying the corrections a new initialization of the affected datasources is necessary. -
Lots of problems with E6 - must be fixed soon (e.g...
I have used Nokia mobiles since 1999 and recently "upgraded" from an E71 to an E6. I have found far too many problems with the E6 and would like Nokia to explain what they are doing to fix these issues.
The E6 needs to have the @ symbol in the notifications area at the top of the screen when a new email arrives (like in the E71). It is really shocking that this feature is currently missing - especially as the E6 is supposed to be the upgrade route for E71 / E72 users.
The notification light in the 5-way button is currently useless because it is far too dim to see except in very dark conditions. The light must be turned up much brighter AND it needs to include the option of notifying when emails arrive.
Vibrate is too weak. This needs to be stronger (I believe a firmware update can fix this easily).
Lots of apps in OVI are not yet updated for the higher pixel density E6 screen compared to the E71, so lots of detail and buttons are far too small to use, especially in maps (where the text shrinks too small straight after enlarging a map).
Eg:
- Facebook app (based on the former Snaptu app), works fine but everything is tiny.
- Online maps in ViewRanger (the pre-downloaded OS sheets are fine as they can be enlarged without the text shrinking again).
- Most weather apps
Also, the browser shows web pages adjusted for mobile phones far too small. try looking at the Daily Telegraph webpage - it automatically goes into the mobile site and all text is so microscopically small that it is unreadable (the current solution is to use Opera Mini).
I want the widget that existed in the E71 for email notifications (it shows up a popup with the latest emails) back.
I want the function that tells you how long a call was (like E71) straight after the call.
I want the camera app to be available as a shortcut on the one-touch keys - as this would be the only way to have a physical key for firing up the app. Currently, one needs to find an on-screen icon, which can be a fiddle unless you have the icon on every homescreen.
A better choice of Themes needs to be pre-installed.
I almost feel like ditching my E6 and going back to my E71 because it actually did everything I needed.I had E6, Im using past 1 years, now only its hanging,My warranty time also finished.
russellhawker wrote:
I have used Nokia mobiles since 1999 and recently "upgraded" from an E71 to an E6. I have found far too many problems with the E6 and would like Nokia to explain what they are doing to fix these issues.
The E6 needs to have the @ symbol in the notifications area at the top of the screen when a new email arrives (like in the E71). It is really shocking that this feature is currently missing - especially as the E6 is supposed to be the upgrade route for E71 / E72 users.
The notification light in the 5-way button is currently useless because it is far too dim to see except in very dark conditions. The light must be turned up much brighter AND it needs to include the option of notifying when emails arrive.
Vibrate is too weak. This needs to be stronger (I believe a firmware update can fix this easily).
Lots of apps in OVI are not yet updated for the higher pixel density E6 screen compared to the E71, so lots of detail and buttons are far too small to use, especially in maps (where the text shrinks too small straight after enlarging a map).
Eg:
- Facebook app (based on the former Snaptu app), works fine but everything is tiny.
- Online maps in ViewRanger (the pre-downloaded OS sheets are fine as they can be enlarged without the text shrinking again).
- Most weather apps
Also, the browser shows web pages adjusted for mobile phones far too small. try looking at the Daily Telegraph webpage - it automatically goes into the mobile site and all text is so microscopically small that it is unreadable (the current solution is to use Opera Mini).
I want the widget that existed in the E71 for email notifications (it shows up a popup with the latest emails) back.
I want the function that tells you how long a call was (like E71) straight after the call.
I want the camera app to be available as a shortcut on the one-touch keys - as this would be the only way to have a physical key for firing up the app. Currently, one needs to find an on-screen icon, which can be a fiddle unless you have the icon on every homescreen.
A better choice of Themes needs to be pre-installed.
I almost feel like ditching my E6 and going back to my E71 because it actually did everything I needed.
I dono what can I do, Always hanging and automatically restarting.
Please help me in this concern. -
CopyRights problem with "expires at the fixed time" uat mode
Dear all
I found a problem with rights parameter
When I use rights parameter in uat mode or umt mode
it can't be work with this two modes($uat and $umt)
and I found a document in adobe jp
the document says "only uat mode works well with expire function"
so I change the rgihts to uat
but it still has problem and does not work
this is part of my ASP VBS code
startTime=DateDiff ("s","1-Jan-1970",Date())
endTime=DateDiff ("s","1-Jan-1970",DateAdd("n" , 1 , Now()))
strQueryParams = oGBLink.AppendToQuery("bookid", pSku, strQueryParams)
strQueryParams = oGBLink.AppendToQuery("rights", "$uat#"&endTime&"#"&startTime&"$", strQueryParams)
strQueryParams = oGBLink.AppendToQuery("price", CStr(pPrice), strQueryParams)
....and more
is there any problem with my code??I don't see a problem with your code. You might put in a print statement and make sure that strQueryParams contains what you're expecting.
When you're testing, are you using the same book more than once? If so, ACS can get confused about which voucher to use and use an old one.
- either use a different book each time
- or after each test, reset Acrobat or Reader on your test download machine. Adobe has a KB article:
http://support.adobe.com/devsup/devsup.nsf/docs/53857.htm -
4.1.1 SDK Problems with missing xpacket tags in sidecar XMP files
The current 4.1.1 SDK has problems with sidecar XMP files that don't have the xpacket headers and trailers, i.e:
<?xpacket begin='' id='W5M0MpCehiHzreSzNTczkc9d'?>
<?xpacket end='w'?>
is missing. Now, unfortunately Adobe Bridge CS2/CS3 does not export these xpackets in sidecar XMP files.
The standard, http://www.aiim.org/documents/standards/xmpspecification.pdf, is also very vague about it all:
● Write external metadata as though it were embedded and then had the XMP Packets
extracted and catenated by a postprocessor.
The grammar is strange(past tense had) and the spec implies that the xpacket should be extracted and again catenated... Someone should review this document and clearly state if xpacket statements should be in sidecar files or not. I suspect myself that they should be there, but the standard is very vague.
Anyway, there are two places in the SDK code where changes might be needed:
XMPFiles::Initialize has XMP_Asserts in case the xpacket header/trailer is missing, but the underlying assert is only active in debug builds.
XMPScanner::PacketMachine::FindNextPacket () also has in its truth table the assumption that the xpackets exist.
There could be even other places in the code that assumes that the xpacket tags are present in all files, which includes text XMP sidecar files.
Anyway.
a) Shouldn't bridge export the xpacket tags? Same with any other application?
b) If the spec is vague, then the SDK should not assume that the xpacket tags are present.
Any comments? Has someone already fixed this issue as I suspect a lot of apps using the the XMP SDK would break concerning reading XMP sidecar files? Thx, KentI was able to work around the problem by creating a mapped view of the .xmp file (this creates an array in memory backed by the file on disk, so there's no need to read the file into a separate internal buffer), and constructing the SXMPMeta object directly from the buffer. (The ctor for that class calls ParseFromBuffer, so this is the same thing as was suggested by other messages in this thread.)
It seems that Adobe needs to do one of these things:
(1) say that Bridge CS3 has a bug, and agree that Bridge CS3 should include a proper xpacket header when writing xmp sidecar files
(2) say that the XMP Toolkit has a bug, and that the SDK should be able to parse sidecar files without an xpacket header, and agree to fix the toolkit
(3) say that Bridge CS3 and the XMP Toolkit behave as expected, but then provide a sequence of steps by which users of the XMP Toolkit are expected to read xmp sidecar files written by Bridge CS3
Does Bridge CS4 write an xpacket header to the xmp sidecar files?
Maybe what I could do is create a custom file handler for .xmp sidecar files, so I could use the SXMPFiles for everything, instead of having to special-case .xmp files.
My needs are pretty modest though, and it might be just as simple to use the MS DOM-based XML parser for load the xmp sidecar file. I bet I could get the data I need (only the "Rating" for now) using a simple XPath expression.
-Matt -
How to extract data from a .txt file & send it to a serial port automatically
Hi all
I'm a final yr B.Tech student. I am new to the entire LABVIEW thing. But i hear its really good. My dept. in collge has purchased labview & i'm tryng to use it
As i'm new to labview , i need help plz
" I want to open a .txt file (in my PC) & transmit all the contents of the file via serial (COM) port to an 89%! microcontroller. Also i want to read the feedback messages from the microcontroller thru the serial port & save it to the same file in the PC.All this must be done automatically. ie, no manual intervention after execution starts"
Kindly help me as i'm stuck here & unable to proceed further with my projecthere is my 20min try without debugging (needs a rs232 and loopback connector )
use the probe and highlight the dataflow to see how it works.
as always: there are many ways to solve your problem
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'
Attachments:
read write file to RS232.vi 69 KB -
Pl/sql to extract data with form: extract data is a text file
Hi dear all,
to be straightforward here is the problem: we currenlty developing with oracle tools :" Developer Suite 10g version 10.1.2.0.2" an interface .
Using oracle forms, we would like to program a command button that will be in charge of pooling the data from the database and offer the client to save it on his desktop. The extracted data should be a one single flat text file having a one single continuous row. and the data extracted are from a 10 g database( one table having one column(varchar2(240); and 192 rows );
attached with this mail is ou current script link with the command " when-button-pressed"
PROCEDURE EXTRACTION_FICHIER_FIC_BDF IS
n_bouton number;
LF$File CLIENT_TEXT_IO.FILE_TYPE;
LC$Name Varchar2(100) ;
LC$Fic Varchar2(100) ;
LN$Lines Pls_integer := 0 ;
LC$Line Varchar2(4000) ;
-- cursor --
Cursor C_CUR Is
SELECT ENREGISTREMENT_BDF
FROM ops$admO7.fic_bdf
ORDER BY 1;
BEGIN
LC$Name := 'd:\AA1217.bdf';
LC$Fic := WEBUTIL_FILE.FILE_SAVE_DIALOG
'd:\',
LC$Name,
'Choisir l''emplacement du fichier à sauvegarder'
If LC$Fic is null Then
Return ;
End if ;
-- Open the file --
Begin
LF$File := CLIENT_TEXT_IO.FOPEN( LC$Fic, 'W');
Exception
when others then
message( 'OPEN FILE ERROR ' || LC$Fic );
raise form_trigger_failure;
End ;
-- Write the lines --
For Cur In C_CUR Loop
LC$Line := Cur.ENREGISTREMENT_BDF;
CLIENT_TEXT_IO.PUT_LINE( LF$File, LC$Line ) ;
LN$Lines := C_CUR%ROWCOUNT ;
End loop ;
-- Close the file --
CLIENT_TEXT_IO.FCLOSE( LF$File ) ;
set_alert_property('AL_MESSAGE',alert_message_text,'Export terminé avec succès');
n_bouton :=show_alert('AL_MESSAGE');
synchronize ;
Exception
When form_trigger_failure Then
CLIENT_TEXT_IO.FCLOSE( LF$File ) ;
Raise ;
END;
thanks if advance !!!!!Hello,
what's your problem with this? You posted a lot of useful information like version infos and code (Hint: when you post code you can do this with the tags so it gets formated), but I cannot see what exactly is failing or behaving unexpected, so you might share that too ;)
cheers -
Problem with encoding and charset for downloading a file
Hi guys, I have a problem and I beg for your help, I am 1000% frustrated at this point.
I have a servlet which have to do something and give a file log to the final user. Coding the logic for that took me about 5 minutes, the problem is that the given file doesnt shows properly in notepad (Default app to open txt files). I have tried every way I have read over the internet and absolutely nothing works.
After trying about 20 different ways fo doing this without success, this is my actual code:
Charset def=Charset.defaultCharset();
OutputStreamWriter out = new OutputStreamWriter(servletOutputStream,def);
for (String registry:regList) {
out.write(registry+"\n");
out.close();
the page gives the file to the user, I can download or open it, when I open it this is the result
registry1registry2registry3registry4registry5registry6registry7...
and I am expecting:
registry1
registry2
registry3
registry4
registry5
If I open it with wordpad or notepad++ the file looks fine, but I cant achieve that notepad reads it correctly. I have spent about 10 hours on this and at this point I just dont know what to do, i have tried Windows-1252, UTF-8, UTF-16, the Default one. I have tried to set this enconding on the response header with no luck. Any help will be very appreciated.
Thanks in advance.>
I have a servlet which have to do something and give a file log to the final user. Coding the logic for that took me about 5 minutes, the problem is that the given file doesnt shows properly in notepad (Default app to open txt files). I have tried every way I have read over the internet and absolutely nothing works.
If I open it with wordpad or notepad++ the file looks fine, but I cant achieve that notepad reads it correctly. I have spent about 10 hours on this and at this point I just dont know what to do, i have tried Windows-1252, UTF-8, UTF-16, the Default one. I have tried to set this enconding on the response header with no luck. Any help will be very appreciated.
>
Your file likely uses *nix style line endings and use a single LF (0x0A) as the end of each line.
Notepad doesn't recognize a single LF as the end of line; it expects CRLF (0x0D0A). The encoding isn't the issue.
If you have to use Notepad you will need to add code to find all of the LF characters and insert a CR character in front of them.
Maybe you are looking for
-
Can I use a 21" iMac as an external monitor?
I'm considering getting an iMac or Mac Mini so I can run Xcode. My budget is low, so I'm considering just getting a Mini and using it with an old VGA/DVI monitor. However, as the iMac includes a monitor, mouse, and keyboard, it's actually the same pr
-
Intra-Company Stock Transfer PO is requiring vendor inv to bill customer
I am trying to configure a process where a new item category on a sales order will trigger a purchase requisition (new req type) to create a UB purchase order. When I deliver the PO from the supplying plant, then do the goods receipt in the receivin
-
Tracking cylinder (Gas) Vendor - company - Customer
Hi experts, My scenario is: see 3 site: - X: Vendor - Y: Company - Z: Customer Please tell me how can i track the cylinder when: 1. Y receipt Cylinder from X (currently I'm using RTP-returnable transport packaging in MM) 2. Y send Cylinder to Z (trac
-
Hello, i have maintained ibase entries for non-sap systems as discussed in an other thread, the entry looks like this: NSI 000000000 001 and then i put the same entry in the identification tab, but when i go to the work center and try to open a messa
-
can anyone give me the fields relating EBAN, EKKO and EKPO