Problem with save file window

Every time I save an Image or a File in general the window to save is out of screen resolution.
I have a MacBook Pro Retina 13.3
Running Yosemite.
here is an image of the issue
Buttons for save or cancel are gone and I can't resize the dialogue.
I use just enter and esc to do the actions.

yeah I had the same issue and reported in feedback app when in beta. but. still there.
The save dialogue box grows down with every save , and gets out of mouse range, you can hit return and it will save.
Alternatively go to Display under System Preferences rotate to either 90 or 270 degrees. Now try and grab the bottom of the save box
and pull it so it is now at its minimum, this can be a bit awkward re hand eye mouse coordination.
once you've grabbed it and pulled it back up re-rotate to normal.
and then just try to remember to pull the box up again so it don't wander off the screen again.
hope this helps.

Similar Messages

Ongoing problem with Select File Window on CS4

For a couple of years, I have been experiencing a pesky problem with the Select File window. Whenever I go to insert an image or update the path to an image on an dynamic page (.asp) , the Select File window opens up and looks really strange. The File System list is hovering above the Data Sources list (see below) and the Data Sources radio button is the default. If I tick the File System radio button, I can select a file, hit okay, but it will not actually change or insert that file. What I have to do is tick File System, select an image, select a different image, and then I can select the original image. Its the strangest thing and it is a real thorn in the side. BTW, it is not just my installation... this happened on my old computer as well under CS3 and Windows Vista... it does it now on a newer computer on CS4 and Windows 7. I was talking to a friend the other day and, and it happens to him sometimes too. Has anyone ever seen this?

Not using Application Frame mode. I'm in Standard Screen mode. I have tried to re-size the window by pulling the bottom right-hand corner down and out, as I indicated in my original post, and that is the core issue of my problem. When I pull the bottom right-hand corner down and out, it starts to work normally, but very quickly snaps back to the original size and my mouse is left "hanging," so to speak. I go back to the corner, try again, snaps back again. But if I do it very slowly, such as start by dragging the window to become SMALLER! then continue with the dragging by looping it out to then become larger it doesn't snap back!
Not using sides of the window to adjust window size, though that works. Advantage of using the lower right-hand corner is that I can adjust both side and bottom of window at once in one quick action. At least that's the way it worked for me since Photoshop 3!
I do often work in Full Frame mode, but when I want to pull in layers from other open files, it's nice to see everything I have in separate windows. Often, it is very helpful for me to adjust the size of the window to increase the gray area, when I want to free transform a layer that is larger than the image size. Also, I often like to see the image surrounded by the pure gray space, and not bounded by the distracting edges of the window.
I hope I'm making sense...

Problem with save file control

hi , i have this vi to control a wavelength meter to measure & save reading to a file on my pc
the problem is i need to make the write labview measurment file to be enabled by the Get Lambda swich and at the same time i need the AutoScan to be reading real time (not stop when i push getlambda swith) could you help me please.
Attachments:
wavelendth meter.vi ‏300 KB

Let me just let you know that there is a better way to architect your entire code. Please don't take this as criticism but I really think you should look into event structures, state machine design, queues and notifiers. Have a look at the Producer/Consumer Design (events) and the State Machine patterns by browsing through the templates that are shipped with LabVIEW (File -> New...). Your GUI should be interfaced with using event structures and not polling (like you are doing right now). Implementing a Producer/Consumer design will remove the issue you are facing right now. If you have any questions, please let us know.
Adnan Zafar
Certified LabVIEW Architect
Coleman Technologies

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR

I just stared having problems with importing files from nikon D810 into LR 5.7 it pop a window saying it can not read files on working on a imac 27" running yosemite on my mac pro after a few times it finally was able to read files and import them into LR I never had this problem before was there some kind of update that could of cause this?

Problem with the Finder window in Chrome

Hello,
I have a problem with my finder window in Chrome.
Since the window isn't a separate window anymore, but stuck to the top of the webpage, my finder window is too big. I can't read the "Cancel" or "Send" (I have no idea what's supposed to be there in English but I assume it's something like "send" and "cancel") buttons. I have provided some images of the problem, even if I make the Chrome window as small as possible, the finder window still is too big for my screen. I can resize the finder window from lest to right, but not up or down, which is extremely irritating for me.
If anyone can help me how I can solve this problem.
Thanks!

I found the solution on another thread...Here it is.
"I was having the same problem. I found a way to make it smaller. First, I opened chrome and clicked the green button on the window to make chrome go into full screen. Then I tried to save a file to make the finder window open in chrome. When it opened in full screen I could see the bottom of the window so I resized it to make it a little smaller. Once I did this it remembered the size so now I can access the bottom buttons when I take it out of full screen mode. Hope this helps."
Worked like a charm!

Problem with shares on Windows 2003R2 server from a Windows 8.1 PC

I'm having problem with shares on Windows 2003R2 server from a Windows 8.1 PC. It times out when I try to copy a file from my PC to the server and I get an error message saying "There is a problem accessing network drive W:\. Make sure you are
connected to the network and try again."
I have no problem copying files from the server to the PC.
Any ideas?

Hi,
How about your problem now? Have you test other machine also installed Windows 8.1? Did they have this problem?
To diagnose this problem, firstly, please check Windows 2003R2 firewall settings, also can disable firewall temporarilly for test.
Secondly, try to use Network Monitor to capture network communication package for test.
Network Monitor:
http://www.microsoft.com/en-us/download/details.aspx?id=4865
Roger Lu
TechNet Community Support

What is the exact problem with this file?

Hi all,
There is an old form , which was not in use from many days.
Now when we tried to run the form, i got the error saying "FRM-40734:Internal Error:Pl/SQL error occured.", in the login form.
When i tried to open the fmb file in Oracle Forms Builder 6i, i got the following error:
FRM-10102: Cannot attach PL/SQL library d2kwutil. This library attachment will be lost if the module is saved., but the fmb file got open.
The login button has the following code:
DECLARE
UNAME VARCHAR2(30);
--USER_ID PARAMLIST;
V_USER APUSERMA.USER_NAME%TYPE;
V_PASSWED APUSERMA.USER_PASSWD%TYPE;
BEGIN
select user_CD INTO :GLOBAL.USER_ID from apuserma
where user_CD = :TI_USER_NAME AND user_PASSWD = :IT_USER_PASSWD
AND SYSDATE BETWEEN USER_VALID_FRM AND USER_VALID_TO;
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
:global.compname := :compname;
compnm(:compname);
--USER_ID := CREATE_PARAMETER_LIST('USER_id_NAME');
call_form('Forms\MAIN_SCREEN',hide,DO_REPLACE);
exception
when no_data_found then
MESSAGE('Incorrect Username or Password. Please Re-Enter');
message(' ');
RAISE FORM_TRIGGER_FAILURE;
END;
EXIT_FORM;
When i tried to compile, i got error saying ,
Error 201 at line 10, column 28
identifier 'WIN_API_ENVIRONMENT.READ_REGISTRY' must be declared.
I am not getting to know What is the exact problem with this file?
Help me with this please.
Thank You.
Oracle forms builder 6i.
Oracle 9i.

Vijetha wrote:
I also want to know what is the use of win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername') ??
What does it do??
If i comment the following line , will it be a problem??
:global.user_id := substr(win_api_environment.read_registry('HKEY_LOCAL_MACHINE\system\currentcontrolset\control\computername\computername','computername'),1,10);
Because i commented the above line & compiled, so it is not giving any error now.
So please tell me what win_api_environment.read_registry does??
it's read windows registry value. So, no problem if you comment it.
Thanks

Problem with .sitx files (Safari but not Firefox???)

Hi All,
I have a website online (with help from iWeb and BBEdit) but am having a problem I cant figure out (this IS my first website!)
I am hoping that someone much more knowledgeable than me can help me with it.
I basically have a download section. Icons and desktops.
Now, when I (or anyone else) tries to download- everything seems to be fine in FireFox (even IE!) but not in Safari.
My desktops are compressed as .zip files. No problems there, everyone can download and open (including Safari users!)
My icons are compressed as .sitx files. This is where the problems come in. Firefox and IE download them no problem ('save to disk?' etc) However when one attempts to download the icons (.sitx files) with Safari it simply displays pages of gibberish (starting with the word 'Stuffit') which I am presuming is Safari trying to 'display' the contents of the actual stuffit file.
Why is this? Why wont safari simply download the .sitx files as it does .zip files?
Does Safari have some sort of inherent problem with .sitx files? Is it some sort of configuration within Safari preferences? or (and probably most likely!) is it something I have done wrong?
Oh, my website (page in question!) can be found here:
http://aoimedia.co.uk/news/news.html
Thanks in advance for all your valuable help
Kind regards
John
12 G4 Powerbook/Superdrive. (she's named Skates!) Mac OS X (10.4.4)

Hi,
It sounds like the server the website/file is hosted on is not identifying the type correctly. As you've seen, different browsers will handle this situation differently.
Have a read of this article:
http://www.macosxhints.com/article.php?story=20040211102018600
Hope that helps.

SFTP MGET of large files fails - connection closed - problem with spool file

I have a new SFTP job to get files from an FTP Server. The files are large (80mg, 150mg). I can get smaller files from the ftp site with no issue, but when attempting the larger files the job completes abnormally after 2 min 1 sec. each time. I can see the file is created on our local file system with 0 bytes, then when the FTP job fails, the 0 byte file is deleted.
Is there a limit to how large an ftp file can be in Tidal? How long an ftp job can run?
The error in the job audit is Problem with spool file for job XXXX_SFTPGet and an exit code of 127 (whatever that is).
In the log, the error is that the connection was closed. I have checked with the ftp host and their logs show that we are disconnecting unexpectedly also.
Below is an excerpt from the log
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.055 : Send : Name=SSH_FXP_STAT,Type=17,RequestID=12
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.055 : Transmit 44 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.055 : Remote window size decreased to 130808
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.071 : RepeatCallback received 84 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.071 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.071 : Received message (type=105,len=37)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.071 : AddMessage(12) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Reply : Name=SSH_FXP_ATTRS,Type=105,RequestID=12
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.071 : Send : Name=SSH_FXP_OPEN,Type=3,RequestID=13
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.071 : Transmit 56 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.071 : Remote window size decreased to 130752
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.087 : RepeatCallback received 52 bytes
DEBUG [SSH2Connection] 6 Feb 2015 14:17:33.087 : ProcessPacket pt=SSH_MSG_CHANNEL_DATA
DEBUG [SFTPMessageFactory] 6 Feb 2015 14:17:33.087 : Received message (type=102,len=10)
DEBUG [SFTPMessageStore] 6 Feb 2015 14:17:33.087 : AddMessage(13) - added to store
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Reply : Name=SSH_FXP_HANDLE,Type=102,RequestID=13
DEBUG [SFTPMessage] 6 Feb 2015 14:17:33.087 : Send : Name=SSH_FXP_READ,Type=5,RequestID=14
DEBUG [SSH2Channel] 6 Feb 2015 14:17:33.087 : Transmit 26 bytes
DEBUG [ChannelDataWindow] 6 Feb 2015 14:17:33.087 : Remote window size decreased to 130726
DEBUG [PlainSocket] 6 Feb 2015 14:17:33.118 : RepeatCallback received 0 bytes
DEBUG [SFTPChannelReceiver] 6 Feb 2015 14:17:33.118 : Connection closed: (code=0)
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : Disconnected unexpectedly ( [errorcode=0])
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : EnterpriseDT.Net.Ftp.Ssh.SFTPException: [errorcode=0]
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.CheckState()
ERROR [SFTPMessageStore] 6 Feb 2015 14:17:33.118 : at EnterpriseDT.Net.Ftp.Ssh.SFTPMessageStore.GetMessage(Int32 requestId)

I believe there is a limitation on FTP and what you are seeing is a timeout built into the 3rd party application that tidal uses (I feel like it was hardcoded and it would be a big deal to change but this was before Cisco purchased tidal) there may have been a tagent.ini setting that tweaks that but I can't find any details.
We wound up purchasing our own FTP software (ipswitch MOVEit Central & DMZ) because we also had the need to host as well as Get/Put to other FTP sites. It now does all our FTP and internal file delivery activity (we use it's api and call from tidal if we need to trigger inside a workflow)

[SkyDrive] Files can't be uploaded because there's a problem with a file or folder.

On Windows 8.1 RTM, the SkyDrive metro client shows a message that "Files can't be uploaded because there's a problem with a file or folder." and lists one particular file. When I installed the PC, I have switched then Access all files offline
option to On.
The file resides in a directory I have deleted from the disk. When attempting to get rid of this "problem" (as there are no hints nor UI available) I have manually checked that the directory does not exists on the disk any more, as well as deleting
the directory from cloud storage using a web browser. However, the message is still there.
Restarting the computer several times nor keeping it idle for a significant amount of time did not help.
How to get rid of that "problem" / how to fix it?

Hi
Let’s try to redirect the skydrive folder and sync again to see what’s going on:
1. Open regedit and find following key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\SkyDrive
2. Change “UserFolder” to another location.
3. Open the SkyDrive Metro app to confirm your files and new directory.
Then check the issue again.
Regards,
Kate Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Problem with Offline Files with Cisco NSS322 (firmware 1.3)

Hi
We've recently bought a new NSS322 NAS box to replace an ageing Windows SBS 2003 file server. We've upgraded the firmware to 1.3, and begun moving files across from the Windows server to the new NAS box. However, we're having a problem with Offline Files on the NAS, as attempting to make directories available offline on Windows clients (only tried Vista Business 32-bit so far) we get loads of errors stating that these files cannot be made available offline "because they are in use" (or something like that).
Any suggestions as to why this might be? It doesn't appear to affect all files, but most of them.
I've read somewhere that the "allow oplocks" setting can affect this if disabled, but it is already enabled on the device, so this can't be the cause of the problem.
Any help you could provide would be much appreciated, as at the moment this issue is rendering our NAS unusable as we rely heavily on the offline files functionality.
Thanks in advance.
I have some more information - this appears to be related to the ownership permissions of the files on the NAS. New files created on the NAS can be made available offline, and have the ownership of the person who created the file, however, the files we moved across from the server are all listed as being owned by the user "guest" (I think this may be related to the fact that when we moved the files over, the user was logged in as "admin" rather than a user on the AD Domain). I should be able to resolve this through changing the owner of the files on the NAS, but I can't seem to do this, as I get an "access denied" error each time I try to change ownership.
Message was edited by: redcitrus
Is there any chance someone's going to be able to help me with this? I've currently spent £500 on a box that I can't use. If it can't handle Offline Files satisfactorily, it's no use to us.
I've been looking at this a bit more - if appears that each user can make files they have created available offline, but files created by other people cannot - the error message that appears is: "The process cannot access the file because it is being used by another process".
I'm getting desperate here...can anyone help?
Message was edited by: redcitrus

Sorry, but I don1 speak very good english..
I was Try this quick test: As a quick test, you can do a forward all and make sure you can get into the ftp server.
but result it is to same.
I think, that problem is in firmware, becasue I know more people who own this router with to same firmware version (2.0.1.3), and have they to same problem how I.
I have DISABLED FIREWALL on my router and problem hold over.
If I replace router Cisco Linksys WRVS4400N by Ovislink router or any other, issue (problem) already no is.
Configuration in Cisco Linksys WRVS4400N and configurations in any other router is to same, but FTP connection via Cisco Lynksys always will crash.
If I connect to any other FTP server, sometimes requieres from me ftp login and password. It is OK, but if I assign login and password, after connect me to this FTP server, i see folders and files on this server, but without reason connecting fall down.
Few seconds later if I connect to the to same FTP server, sometime either not request login and password and connection fall down.

Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem :)

Hi, I have a problem with opening files on my desktop. When i double click a file I would lime to open nothing happens. Please help me with this problem

hello, this might be a preference in your google search settings. go to google.com/preferences and disable the option to ''Open search results in a new browser window''.

Problem with applet file loading

I have a problem with loading files into a java applet. import java.applet.*;
import java.awt.*;
import java.io.*;
import java.util.*;
import java.net.*;
public class main extends Applet {
     private static ArrayList<String> SGM;
     public void init() {
          SGM = new ArrayList<String>();
          String gameDir = getParameter("game_dir");
          try {
               File fHandle = new File(gameDir+"game.sgm");
               Scanner fScanner = new Scanner(fHandle);
               while(fScanner.hasNextLine()) {
                    SGM.add(fScanner.nextLine());
               //System.out.println(SGM.get(0));
          } catch(Exception e) {
               System.out.println("Applet threw error: "+e);
...The problem is with File fHandle = new File(gameDir+"game.sgm"); I tried putting File(gameDir+"/game.sgm"); and appending / to the folder in the <PARAM> tag, but it still changes it to \, which means I can only run it locally, and in Windows. Why is it doing this, and how can I fix it?

This file you were hoping to load: it's on the server, right? Not on the computer where the applet is running in a browser?
(At least that's a common mistake made by people when they write their first applet.)
If that's the case then you can't use a File object to access a file on a different computer. To access a file on the server, first you will have to put the file in a place on the server where it can be downloaded. Then in your applet you need to get a URL for the file. (The getDocumentBase() method can be used to prevent you from having to hard-code the full URL for the file.) Next, "this.getClass().getResourceAsStream(URL)" gets you an InputStream from which you can read the data from the file.

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205)

I am trying to get the free trial to cc but it said there seems to be a problem with the files (Error code: 205) please help

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Problems with .ARW files and auto toning

problems with .ARW files and auto toning
let me try to explain this because this has happened in past and never found a way to resolve but i lived with it
now that I have a Sony A7R the problem is more serious
Firstly i take pride it making the picture happen all in camera, i use DRO lvl 5 to get enough light, like when i'm shooting at dusk. DRO its like doing HDR but in a single file, it lightens the darks. in my camera i'm happy with results
but when I upload them to lightroom, they come out near black.
allow me to explain
lets say I import 100 images
i double check my preferences and everything is UNCHECKED when it comes to importing options, there is no auto toning, nothing.
as the images import i see a preview in the thumbnail which looks fine.
i double click on one to enlarge it, hence leave grid view.
for a brief 1 or 2 seconds, i see the full image in all its glory but than lightroom does something funny, it darkens the image
one by one as it inspects each image, if it was a DRO image it makes it too dark.
to make this clear, the image is perfect as it was in the beginning but after a few seconds lightroom for some reason thinks it needs to correct it.
how to prevent lightroom from doing this, i want the image exactly as it is, why must lightroom apply a correction>?
i think it has to do something with interpreting the raw file and lightroom applies its own algorithm.
but here is what i dont get.....before lightroom makes the change i'm able to witness the picture exactly as it was taken and want it unchanged..
now i have to tweak each file or find a profile for it which is added work.
any ideas how to prevent lightroom from ruining my images and just leave them as they were when first detected...
there are 2 phases...one is when it originally imports and they look fine
second is scanning each image and applying some kind of toning which darkens it too much.
thanks for the help

sorry thats the auto reply message from yahoo email.
i've disabled it now
thing is, there is no DRO jpg to download from the camera
its only ARW. so my understanding is when i use DRO setting, the camera makes changes to the ARW than lightroom somehow reads this from the ARW.
but then sadly reverts it to no DRO settings.
because i notice if i take normal picture in raw mode its dark but if i apply dro to it, it comes out brighter, yet when i d/l the image from camera to lightroom, which is an ARW - there are no jpgs. lightroom decides to mess it up
so in reality there is no point in using DRO because when i upload it lightroom removes it.
is there a way to tell lightroom to preserve the jpg preview as it first sees it.
its just lame, picture appears perfect...than lightroom does something, than bam, its ruined,.
what do i need to do to prevent lightroom from ruining the image? if it was good in the first place.

Problem with save file window

Similar Messages

Maybe you are looking for