Problem with sender ABAP proxy
Hi All,
I have created sender ABAP proxy (Async). I am testing the proxy from SPROXY transaction it selft .. when i provide the data and execute the proxy it is showing <b>"Services Processed Without Error"</b> , but i am not getting any error , i am not able to see any message in SXMB_MONI or RWB .. how to check where the message is failing ??
Hi,
You said you are sending message from proxy....its very easy to debug in this case. You can set a breakpoint directly in your proxy caling program. Just check if you are calling commit work after calling proxy.
Also you can do it using the abap system command '/H' or the code 'BREAK-POINT' for/in the report program triggering the iterface.
Check out this thread...
How to Debug proxies
Hope this will help you.
Ni;esh
Similar Messages
-
Problem with Synchronous abap proxy time out
Hi there.
I have the following scenario:
sync sync
3rd party <--> PI <--
> ERP
http abap proxy
In the implementing class on the abap proxy i'm calling an standard BAPI, followed by a commit and returning the result.
The 3rd party app has a mechanism that when a message fails, he'll retry each 5 mins until it gets the response.
Last night there where some delays on ERP that cause the sync mesages to timeout, the 3rd party retried about 10 times to send the message until it finally went off. This morning i check and i have the same message 11 times on ERP!!, to my understanding if the sync comm timed out the process will abort and the message will not be processed on ERP, does anybody knows if im missing some configuration for this to work this way??.
Kind Regards,
Roberto.Hi Roberto.
There are a lot of time out configures in PI .
Follow the link that explain about this:
How to Investigate Timeouts In Synchronous XI PI Scenarios
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c059d583-a551-2c10-e095-eb5d95e03747
I hope to help you.
If you still keep this problem, you can ask me more about it.
Regards..
Bruno. -
Problem with Inbound Abap Proxy
Hi Experts,
I have an Inbound ABAP proxy scenario that insert data into a ztable. The whole process from XI to R/3 works fine, except it does not update my ztable.
The only time the ztable gets updated is when i debug it. I used this report "SPRX_TEST_INBOUND" to debug
Anyone who's had a similar problem.
Thank you in Advance,
DannyHi,
did you use the same XML from SXMB_MONI that gets posted during message flow?
you can check inside your inbound proxy if the values are not empty etc
and then raise an exception to see what's going on
you can also do an endless loop and get inside it to see the real values
that get passed into the proxy
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a> -
Error while executing sender ABAP proxy program in ECC
Hi,
We have lot of proxy to file scenarios, most of them are working fine. I am having issue with 2 interfaces, when I execute sender ABAP proxy program, we are getting following errors in ECC:
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="PARSING">GENERAL</SAP:Code>
<SAP:Stack>com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=;TP=;FS=ED1CLNT290;TS=;AN=CustTrPowersellS_Out;ANS=urn:maines-net:OTC_079E:PowersellCustomerTerms; at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:237) at com.sap.aii.af.service.cpa.impl.lookup.CommonLookup.getInboundBinding(CommonLookup.java:167) at com.sap.aii.af.service.cpa.InboundRuntimeLookup.<init>(InboundRuntimeLookup.java:88) at com.sap.aii.af.service.cpa.impl.lookup.AbstractLookupManager.getBinding(AbstractLookupManager.java:519) at com.sap.aii.adapter.soap.web.MessageServlet.getBinding(MessageServlet.java:875) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:439) at etc etc
Configuration should be fine because many scenarios are working. Can you please help me where could be the error?
Let me know if you need more info.
Regards,
N@v!nHi Naveen,
We saw your solution about this issue. We are also facing same issue. I wanted to know where we have to update scenario as simple scenario or integrated scenario.
And could you please tel me what is the main diff between in these two.
As we are are using PI 7.31 java stack so for this version what we have to use.
Thanks,
Shivdeep Kumar -
Problem with Send and Receive Emal In SAP System
Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PMHi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael -
Problem with sending and receiving e-mail through exchange [GMail]
Hello I have problem with sending and receiving e-mail.
all is well set, username and password are correct, the server set m.google.com. verification of data is about like stepping into a post and want to check the post office gives me an error message: Can not Get Mail. The connection to the server has failed
I have this problem on my two iPhonehttp://www.zdnet.com/google-drops-exchange-activesync-support-for-free-email-acc ounts-7000008836/
-
I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions?I recently upgraded to Firefox 13.0.1 and I’m operating a Mac Powerbook Pro with OS of 10.6.8 (Snow Leopard).
Now I’m having intermittent problems with sending emails where Firefox freezes up. There is often a yellow warning above suggesting 32-bit mode, sometimes I can click to shift it that way, sometimes not.
Anyone having these problems?
Any suggestions? -
Mail and iPhoto Problems with sending photos.
Mail and iPhoto Problems with sending photos.
I have this problem that started a while ago and seems to be getting worse.
Here are the different scenarios.
-If I try to share a photo to email within iPhoto, it will insert the image file name in the mail message, but no image icon or opened image. In iPhoto Preferences under General I have chosen to use Email Photos using Mail.
-If I choose to use iPhoto to send the photo, it will compose the message and the photo is viewable. If I send the message i can view the photo within the email I sent to myself. Nothing happens when I double click on the photo in the Mail message. Nothing happens when i control click on the photo in the mail message. Nothing happens when I try to drag the photo to the desktop from the mail message. When I try to save attachments from the email and choose a place to save it, the save button is grayed out and it cannot be saved. When I check the mail message it says there is an attachemnt but there is no file size listed.
-If I use the stationary within Mail app I cannot drag a photo into the placeholder, I get a circle with a line through it symbol when I try. It happens if I try to drag a photo from the desktop or from the media browser within Mail app.
-If I drag the photo to the desktop from iPhoto, I can double click it on the desktop and it will open in Preview.
-If I then control click on the same photo on the desktop and scroll to share/email, the generic photo icon will be inserted in the mail message. If i double click the photo icon in the mail message I get a message it can't be opened because it is empty.
-If I drag that same image to the mail message body the same thing happens.
-If I send that email to someone they cannot open the image file.
What I can do:
- I can drag that same image file on the desktop to my dropbox folder and it will upload. From there I can go on my iPad and download the photo and send it through email just fine.
-I can open the same image file on my desktop in Preview, I can copy and paste it into a mail message and the image will be viewable in the mail message by me and by the recipient.
-I can drag that same image on the desktop to my safari browser window and it will be viewable in the page. i can then copy and paste that image into a mail message and it is viewable in the message. I can then send that email message to myself and i can control click on the image and get all my options. It also shows as an attachment with the size of the image file in the mail message.
I can send that message to someone and they can see the photo and open it fine.
-If I send that same email to me I can see the photo within the mail. If I then drag that photo to the desktop I cannot use it again to put in an email as the same problem happens again.
I have tried all scenarios in my user account, another users account and in a guest account. The same happens in all. I am guessing because of this it is not a corrupt preference file, unless all of the preference files are corrupt. The guest user account I added a new email account so it was brand new and still had the problem.
I am stumped, all and any help is appreciated.Another problem that may be related….
I have Snapz Pro. I used to be able to save the snaps to my desktop or a folder. Now when I take a screenshot and try to save the file to my desktop or a folder on my desktop I get this message "Files cannot be created in the selected location. You do not have permission to write to the selected location. Please choose a different location." I have found that i can only save the file to the clipboard. I have repaired permissions many times and still I have this problem. -
Sender Abap Proxy no get in PI
Hi expert,
I have an sender abap proxy scenario which working fine in development server and even staging server but when transported to production server, the data seem can't go into PI server. I have check all the setting and sure the setting was set correctly. When i check on the system log in sm21 abap ERP, it show an error.
Operating system call gethostbyname failed (error no. 0 )
Any idea on how to solve this? Thanks.Hi,
plz check transactions sldcheck and sldapicust. Everything ok?
What about SXMB_ADM? System maintained as Application System? Destination given to PI Runtime?
Can you ckeck that destination at SM59?
Plz have a look to destinations SLD_NUC and SLD_UC. Do they work?
Regards,
Udo -
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
Problem with sending sms - nokia x3
Hello,
I've got a problem with sending sms in my nokia x3 - actually with recently used number. I sent messages, but the list is the same. There is only one number although I used many more. I removed this number from the list, but is still here. I also tried to turn off the phone and pull out the battery, restart factory setting but there's no change.
Could somebody help me, please?
p.s. Sorry, but my english isn't well. I hope the post is understoodCheck if there is any relation with the LOG... When you clear the log.. (selecting ALL).. is it removing details from the RECENTLY USED too...
To confirm this select Clear Log.. and check if that one no. you are talking about still remains or not.. If its no more there means you must have cleared the log just before using the last no. that is appearing..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box... -
Sender Abap Proxy -- Receiver JDBC , catch communication channel exceptions
Hi All,
I have a sender abap proxy and a receiver jdbc asynchronous interface.
Now under some circumstances when I send some junk data for an update query(which satisfies metadata requirement but wrong primary key) it shows chequered flag in both XI and r/3.
But in communication channel it shows error.
Queries:
1. How do I handle this.
2. Since this is triggered from Abap wht will be subrc when method ends in this particular case.
3. Is there any possibility of program goin into dump?
Regards,
PremYou can catch the exception in cx_ai_system_fault.
http://help.sap.com/saphelp_nw70/helpdata/en/75/a55c3cff8ca92be10000000a114084/content.htm
DATA:
lo_mes TYPE REF TO
[Client proxy class],
l_sys_exc TYPE REF TO
cx_ai_system_fault,
l_app_exc TYPE REF TO
cx_ai_application_fault.
CREATE OBJECT lo_mes.
TRY.
CALL METHOD
lo_mes->EXECUTE_SYNCHRONOUS
EXPORTING
OUTPUT = ls_request
IMPORTING
INPUT = ls_response.
CATCH cx_ai_system_fault
INTO l_sys_exc.
* handle system error
EXIT.
CATCH cx_fault_1
INTO l_app_exc.
* handle application error 1
CATCH cx_fault_n
INTO l_app_exc.
* handle application error n
CATCH cx_ai_application_fault
INTO l_app_exc.
* handle other
* application errors
ENDTRY.
Thanks,
Beena. -
Dear Experts,
I have two requirements. Requesting experts' help.
1. How to acheive Quality of Service EOIO for Sender ABAP Proxy. I know there is set_serialization_context method that we can use, but do not how to. Do we have a guide? Can you please help?
2. When I acheive EOIO as mentioned in point-1, when all the messages are sent to same queue, in case if previous message fails in PI mapping, I do not want the next message to stuck in the queue, it should continue processing. How can we do this?
Thank you.
Best Regards,
SaravananHi sarvana,
For your first question:
Please see the thread:
How to determine quality of service of communication between XI and R/3
second question
In Case EOIO any kind of error Message processing will be stopped.
You cant specify that only for mapping error EOIO will not work and for other error it should work as EOIO -
Hi
I am referring to I am referring to /people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies for EOIO in sender abap proxy
My requirement was to send thedata and trigger messages in EOIO fashion in one Queue.
This is working fine for one interface...
but for the other interface it is always creating 2 queueids...one for data messages and other for the trigger message..
Queueid that I have given is supose "ABC"
then it is always creating 1 Q like XBQOT___ABC
and 2nd Q like XBQOH1__ABC.
ideally both the Qname should be the same...any ideas?
PS: if i check the Q name in SXMB_MONI of SAP system it is same for both the data and trigger like "ABC"
Edited by: Tarang Shah on Jun 4, 2010 5:12 PMAny ideas ?
-
Make Sender ABAP proxy transport HTTPS
Hi Experts,
I have a sender ABAP proxy scenario without CC configuraiton. Now if i want to HTTPS for data transportation from R3 to PI. What could be the possible ways?Hey,
>Now if i want to HTTPS for data transportation from R3 to PI. What could be the possible ways?
Yes,
Create the Port for HTTPS, Install the certificates , Change the parametr in Visual admin for HTTPS call.
Cheers
Agasthuri
Maybe you are looking for
-
I have a Presario SR5450F. Recently, it is very slow to boot up. It hangs up on the Compaq screen (Setup, Boot Menu, System Recovery, Diagnostics). It hangs up on that screen for at least 10 minutes, which is unacceptable. It just started doing t
-
R12: How to filter AP and PO Accrual Reconciliation Report based on GL Date
Hi, Anybody know how to filter AP and PO Accrual Reconciliation Report based on GL Date from and GL Date to in R12? Since we just upgraded from 11.5.10 to 12.1.3 and found we cannot filter those report for specific date. It shown all data included th
-
ASO: How to set up Quoting and XML to Print Quote in R12?
Which are the steps to set up Oracle Quoting and XML in order to Print a Quote in R12?
-
My ipod will not let me access any apps using wifi, it indicates at the top of the screen that there is a strong wifi source but it refused to work on wifi apps. I think this is because if need an update but will not let me as it says an error occurr
-
ORA-28579 during Intermedia indexing
The following error occured during the creation of an Intermedia index: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-20000: interMedia Text error: ORA-28579: network error during callback from external procedure agent ORA