Problem with Stock Value Report

Hi Experts,
We use MB5B report to see the opening and closing value of stock for the given period.
Here i am facing one problem that even i am running the report for the same period ( already closed periods) ans same inputs the system gives me some different valus every time i am running .
I observed that difference between the opening and closing values for every output is constant.
What could be the reason that system gives such different values when i run MB5B . No backposting is done.
Regards, B

Thanks for replying,
i have mentioned the
company code, Plants ,
Selection date,
in stock type valuated stock,
in settings selection
Totals only - Non Hierarchy Display Layout
Only Matls Handled in Batches ( But Batches w/o stock segment is not checked)
It is giving me changed values after every 10-15 minutes.
Regards,
BB

Similar Messages

  • Problem with offset values

    Hi Experts,
    I have a problem with offset values. I have create a variable on OFISCPER, it's characteristic value, indivdual value, mandatory and ready for the input. I need to show the varibel period and the l previous period and so on till 12 periods. I used the offset values (-1, -2, etc.) but when I execute the query I can show just the variable period and the period previous I don`t see. The query is based on multiprovider and don´t has filters. Can anyone help me?

    Leonel,
    You may nt need to have 12 columns in the query designer.
    You could include the keyfigure and restrict it to the variable and create the offset for the 12 periods
    Check this http://help.sap.com/saphelp_nw04/helpdata/en/00/e8d13f7fb44c21e10000000a1550b0/frameset.htm
    -Doodle

  • Problem with exporting a report to excel vial citrix server

    Hi,
    We are encountering a problem with exporting a report to excel through ALV local file icon.A spread sheet is downloading only one row (From header) instead of many rows from the ALV output .  
    Above is working fine for the GUI installed on my PC, but not throgh the Citrix server.
    Can any body have idea on above mentined?
    Regards,
    SK.

    I understand that you're trying to download the file to a local computer  through Citrix. In this case you need autorizations in Citrix for your user ( CItrix user)

  • Problem with printing some report

    hi very body
    we have some problems with printing some reports.
    the problem is when printing a report the computer processes stoped
    and i should restart the computer a gain to print the report for first time and
    then in the second time i have same problem.

    Maher,
    You can check out the new printer driver test utility verions2.0 on OTN at:
    http://otn.oracle.com/software/products/reports/files/printerdrivertest.zip
    This should help you determine if it is a printer problem or whether you should look into another area.
    Also, you don't mention which version of reports, what command line options your using, the computer
    configuration your using whether it is a network printer or local printer connected to the machine. Support
    will need this information to help determine where your problem lies.
    Regards,
    The Oracle Reports Team

  • Problem with the crystal reports XI

    Portuguese
    Boa Tarde, tenho um problema com o cristal reports XI.
    ele esta em producao fazendo a consulta em um servidor mas quando eu acesso passando parametro connectionInfo.ServerName = <endereco do servidor> para um servidor de teste pelo VStudio 2005, ele nao busca os dados deste e continua acessando o servidor de producao.
    gostaria de saber como consertar isso
    English
    Good afternoon, I have a problem with the crystal reports XI. him this in production making the consultation in a servant but when I access passing parameter connectionInfo.ServerName =  I address of the servant > for a test servant for VStudio 2005, he doesn't look for the data of this and it continues accessing the production servant.

    Fabiano, here is what I understand of the issue:
    1) You are using CR XI (I am not sure if release 1 or release 2)
    2) you are using .NET 2005
    3) you are trying to change the server name, but the report keeps giving you data from the original server
    Please answer the following:
    1) Are you using CR XI release 1 or release 2?
    2) Can you change to the new server, using the Crystal Reports Designer?
    3) Can you duplicate the issue on your development computer?
    4) What Crystal Reports service pack are you on?
    5) Are you connecting to the database using OLE DB?
    Ludek

  • LOV Problem with multiple values

    HI All,
    I have a problem with LOV .When ever i click LOV after search button all values are displaying fine.
    But when i get so many values i want to select only one vlaue that is not cmng to the main page ....Cursor is in running state always after that time out error is coming in my application .
    This problem is coming with with only single value selection in lOV only problem with Multiple values retrival that time only...
    (Iam using 11.1.1.3 Jdeveloper.)
    Thanx in advance...

    duplicate of {thread:id=2286814}

  • Facing Problem with passing Values from One report to another

    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

    sorry for the late updation.
    My First Report, Summary level is a Pivot Table.
    I tried the same report with Table option, the value is passing correctly.
    Is there a way to get rid of this situation using Pivot table.
    Thanks for your help.
    below is the original request.
    Hi,
    I am Hemanth, I have developed 2 reports. Firast Report High Level Summary, Secong is detailed. First report is developed using Union(4 union) , I am having 4 columns. The report is generating the data. I have used Navigation option on Client Column to move on to Second report. In Second report with in Filter i am using Prompted option. Due to some problem, the client value from first report is not passing to the second one. The second report is getting generated for all the clients.
    Normally i have used this Navigate option in other reports and that works fine. I have even tested with Union, it works. This time it is giving some trouble.
    Please, let me know whats going wrong.
    Thanks for the help.

  • Problem with Cross-tab report (RTF Template) null values, current-group()

    Hi, experts!
    I generate Cross-tab report using RTF Tamlpate and I have problem with grouping.
    My XML file have to be with one group only because I want to using dynamic regrouping inside the RTF template.
    Here is my data structure (XML file):(Look the images for details)
    http://img156.imageshack.us/img156/3997/xmlstructureay9.jpg
    =======================
    WITH GROUPS
    =======================
    Here is my RTF template:
    http://img151.imageshack.us/img151/2951/resultcrosstabbycustomehf8.jpg
    When I'm using grouping and I want to have for each group cross-tab report I have the following problem: (Look the images for details)
    http://img156.imageshack.us/img156/8786/resultcrosstabbycustomect9.jpg
    And this is my code I'm using inside the RTF template with groups:(Look the images for details)
    http://img156.imageshack.us/img156/4253/fieldbrowserxb7.jpg
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    =======================
    WITHOUT GROUPS
    =======================
    Here is my RTF template:
    http://img151.imageshack.us/img151/9545/resultcrosstabwithoutgrzg7.jpg
    When I generate one cross-tab there is no problem: (Look the images for details)
    http://img156.imageshack.us/img156/7030/resultcrosstabwithoutgrsr1.jpg
    This is my code I'm using inside the RTF template WITHOUT groups:(Look the images for details)
    http://img151.imageshack.us/img151/7030/fieldbrowserwithoutgrours8.jpg
    Can someone give me a hand to deal with this?
    Thank you!

    Pitson,
    better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
    BI Publisher
    Regards
    Rainer

  • Facing Issue with Stock Ageing report

    In Blocked Stock Ageing report Output, I am facing following issues
    1. Stock is correct but once we include the "Reason For Movement" then the aging is getting wrong  and in some cases value is coming Negative.
    2. In some cases "Reason For Movement" is coming in ‘#’, but this is a mandatory field. Hence cannot be blank.
    Note:
    1. Overall stock is coming correct.
    2. Reason Movement chat. is in free char
    3. Report is based 0IC_C03.

    Hi Nadeem,
    Reason for Movement is loading from  what attribute?  check in RSRV for that attribute.
    RSRV-->All Elementary Tests ->Master Data ->Compare Size of P-, Q- with X- and Y- Tables respectively .
    If it has any error then  correct that error in RSRV. It  will solve your problem.
    Regards,
    Rajesh

  • User defined field insertion problem in Stock Taking Report (PLD)

    We are creating one PLD for one of our customer for Stock Taking Report by modifying the existing sytem report. We will insert two user defined fields (Rack & Bin) from OITW table and link these with the warehouse code field which is at report header as there are different warehouse for the item and material is kept in different rank and bin in different warehouse. But after inserting these fields we found that repetative area becomes blank in the report.
    So please let us know how to overcome this problem.
    Thanks & with regards.
    Aloke
    Edited by: ALOKE BANDYOPADHYAY on Sep 4, 2010 4:42 PM

    Hi Aloke,
    This PLD is one of the hard coded PLD. You are not able to add UDF freely. I believe you may only add UDF from OITM table. Try you own report instead.
    Thanks,
    Gordon

  • URL problems with SQL Server Reporting Services 2012 with wildcard SSL certificate

    Hi,
    I have single server, domain member, with SQL Server 2012 SP1 Reporting Services.
    I am trying to get work with url: https://reports.mydomain.com
    I have valid wildcard certificate (*.mydomain.com) implemented and configured URLs in Configuration Manager.
    https://reports.mydomain.com/ReportServer - works fine
    https://reports.3pro.hr/Reports/ - I got error:
    The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel.
    In rsreportserver.config I have:
    <Add Key="SecureConnectionLevel" Value="2"/>
    When looking my ReportServerService_date.log file I have something like:
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server internal url https://localhost:443/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using report server external url https://serverhostname:443/ReportServer.
    configmanager!DefaultDomain!3f4c!03/10/2013-20:24:34:: i INFO: Using url root https://reports.mydomain.com/ReportServer.
    Also, error shown in log file:
    appdomainmanager!ReportManager_0-2!4c50!03/10/2013-20:24:53:: e ERROR: Remote certificate error RemoteCertificateNameMismatch encountered for url https://localhost/ReportServer/ReportService2010.asmx.
    ui!ReportManager_0-2!4c50!03/10/2013-20:24:54:: e ERROR: System.Net.WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
    The remote certificate is invalid according to the validation procedure.
    Btw, is there a way to delete/disable access using https://localhost and/or servername (not FQDN) since SSL will not work in this way for me, and I want access only by full url - https://reports.mydomain.com , not localhost ..
    -- Hrvoje Kusulja

    I spent one of my 4 free support incidents with Microsoft (part of MSDN subscription) this year to get this investigated.  The tech support person helped me through several issues but had to leave to attend some training, and I got past the last hurdle
    before she called me back.  Here are the steps that resolved this issue for me.  I know for sure that step 5 was necessary.  Step 1 may not apply to you, and steps 2-4 may or may not have been necessary (they didn't immediately fix the issue,
    but I didn't roll them back either so they may have been necessary.)
    Step 1:
    Ensure you are editing the correct rsreportserver.config file.  I had been making changes to a file that was installed in C:\Program Files\Common Files\microsoft shared\Web Server Extensions\14\WebServices\Reporting, but that was a rsreportserver.config
    file for some sharepoint integration that I'm not using.  The correct path on my system was E:\MSRS11.MSSQLSERVER\Reporting Services\ReportServer\rsreportserver.config, but yours may vary. If you can't figure it out, look in the registry under HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft
    SQL Server\MSRS11.MSSQLSERVER\Setup in the key named SQLPath, and then go to the ReportServer subdirectory of that path.
    Step 2: 
    In rsreportserver.config, ensure that SecureConnectionLevel is set to the value 3.  Was set to 0 in my configuration.  Corrected line in your rsreportserver.confiog file should look like:
    <Add Key="SecureConnectionLevel" Value="3"/>
    Step 3:
    In rsreportserver.config, add the correct value to the <URLRoot> element (which already exists in the file.)  In my configuration, this value was blank.  The value should be the fully qualified path to your report server, with a hostname that
    is valid for your certificate.  For example, if my cert matches *.mydomain.local:
    <UrlRoot>
    https://myserver.mydomain.local/ReportServer
    </UrlRoot>
    Step 4:
    Ensure that your certificate exists in Trusted Root Certification Authorities in certmgr for the local machine.  I had the certificate installed as a Personal certificate for the local machine, which I still think was correct (the certificate wasn't actually
    the problem and worked correctly for Report Server, and the failure was caused by SSRS incorrectly making a https request to a localhost URL), but she had me remove the certificate from Personal and add it to Trusted Root Certificate Authorities.  That
    broke things and the cert was no longer listed as a cert I could bind to, so we then copied it so it existed in both Personal and Trusted Root Certificate Authorities.  This is how I left it, not sure if that was necessary.
    Step 5:
    This was the fix that finally got things to work. In rsreportserver.config, add the same value to the <ReportServerUrl> element (which also already exists in the file) that you added in step 3.  In my configuration, this value was also blank.
    The corrected value should be the same as in step 3, for example:
    <ReportServerUrl>
    https://myserver.mydomain.local/ReportServer
    </ReportServerUrl>
    Then restart your report server (stop & then start in Report Server Configuration Manager), and the problem should go away.  At least it did for me.
    Good luck!

  • Discover group problem with cross tab report

    Hi, I'm working on a cross tab report in discoverer 4i and I'm having a problem with two of the colums. I'm doing a count on one field but because they are called something different they are being shown as two seperate columns rather than 1.
    I have one called 101 -AVG and another called 101-AVG. My condition pulls every result back that starts with 101 in the table. So because in the table the values are different it breaks the count into totals for 101 -AVG and 101-AVG.
    Is there some way I can group these results together into one field?
    thanks,
    Ian

    Pitson,
    better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
    BI Publisher
    Regards
    Rainer

  • Problem With MC.1 Report vis-a-vis chnage in Division

    Dear All,
    I am facing some problem related with MC.1 Report.
    The problem is basically due to Change in DIVISION field after doing MIGO.
    At the time of Material upload, wrong Division was uploaded. While analyzing the MC.1 report basis the Division, we came to know that the Report is wrong due to wrong Division in Material Master.
    We rectified the Division, ran the MC.1 report, we found that the Stock is getting displayed in both the (old & new) Divisions based on the Transaction date.
    Would like to know is there any method thru which we can update the Old Transactional Records (related with Division) so that we can get the correct report.
    Thanks & Regards,
    P K Karn

    Hi hawkstringer
    Do you encounter this problem using a deployed version of your code? Note that the subject of this topic is about deploying an FPGA application.
    I forgot I posted here, in the mean time I've managed to deploy my application. I think my problem was solved when I included all necessary drivers and components (but I'm not absolutely sure). I included the following:
    NI IVI Compliance Package
    NI FlexRIO
    NI PXI Platform Services Configuration Support
    NI R Series Multifunction RIO
    NI DAQmx Core Runtime
    NI DAQmx MAX Configuration Support
    NI RIO
    Good luck!

  • CRVS2010 Beta - Problems with printing Crystal Reports for VS 2010

    Good afternoon,
    We have the following problem, we used the version of Crystal Reports that came integrated with visual studio for several years. But we are migrating to the version of Visual Studio 2010, and we are using the version of Crystal Reports for this same version, running on screen is correct, and run all the reports, but in print there is a failure we could not solve. Our customers use printers dot matrix as the "Epson LX300 +", but when you print the report leaves the impression defective in the previous version of Visual Studio 2005 "The impression is quite clear, we have attempted to overcome this problem with the options of PrintMode with activex and pdf in the CrystalReportViewer, and RenderingDPI option with multiple values. Obviously when using other types of printers such as laser or inkjet printing is perfect, but due to cost our customers use the printers mentioned. The server where the application is Windows server 2008 and client computers are windows xp, windows 7, windows vista. As network hardware and printers are working properly, and from other applications and from the other server with versions of Crystal Reports If anyone knows how to solve this problem I would like to receive support and ideas.
    Thanks
    Subject modified as per the sticky post at the top of this forum; [Crystal Reports for Visual Studio 2010 Beta - read before posting|Crystal Reports for Visual Studio 2010 Beta - read before posting;
    Edited by: Ludek Uher on Oct 11, 2010 3:42 PM

    I have a question about printing reports. We are using VS2008 and the CR reportviewer with printmode = ActiveX. Many of our users absolutely hate the number of steps they must go through and the time it takes to print a Crystal Report when printmode = PDF. In our environment several times per day, we need to produce hard copies of reports for legal reasons. Making the users first render the report, then had it off to Adobe to print simply takes too much time which is why we are using the ActiveX print control.
    We recently started looking at VS2010 and discovered the issue with the unbundling of Crystal Reports. We have not downloaded CR for VS2010 yet.
    My question is this: for VS2010, what happened to the ActiveX print control? I read somewhere that it was going to become some WPF-type thing but there weren't many details about that. So when a user clicks on the print button in the Crystal Report Viewer intended for VS2010, what can they expect? Can they still print straight to a printer (is there something that gives them this capabitliy like the Active X print control did?), or has that capability been deprecated and they have to go through PDF? Thanks in advance for any information you can give me.

  • Yahoo Mail push problem with stock email app

    It is nice to see that Verizon is offering push services for yahoo mail (and possibly for others as well, I only tried yahoo) on select phones now, the Droid Charge being one of them. If you add a yahoo account in the stock email app, it configures it through "Verizon email gateway server" and the messages will be pushed to the phone just like gmail had been, and you will get your new messages almost instantaneously.
    I previously had an htc incredible and that phone did not have that feature. My e-mails were being checked at an interval that I could select, but not pushed.
    What this email gateway does is (as I understand it): 1) your phone sends your credentials to the gateway server where they are stored, 2) the server connects to yahoo mail servers with your credentials, and 3) whenever there is a new message, the gateway server retrieves and pushes it to your phone, in other words it pretty much acts as the middle man that has a notification capability. The gateway server only accesses your inbox folder and it only does incoming services. For other things such as sending messages or checking other folders, your phone connects to yahoo mail servers directly. My incredible on the other hand used to connect to yahoo mail servers directly for everything including inbox access and unfortunately those servers do not have the push capability to mobile devices.
    I got the Charge over two weeks ago and enjoyed push on yahoo for about ten days. But then suddenly it stopped working. It would no longer update my inbox even when I selected refresh through the menu. If I went into other folders, they would update and I could send emails. However, my inbox would not update. I waited a day, then I went into settings/apps/manage apps and deleted the cache and data of the mail application to fix a possible glitch. (It works on the market app when all of your downloaded apps disappear from the list every once in a while due to a glitch)
    I ended up with a blank inbox that couldn't download any of the messages. Then I removed the yahoo account and tried to readd. Now I get the "Fetching mailbox failed, retrying. . ." error and sometimes it retries for up to a half hour (until I manually stop it) or sometimes it says "Unable to connect to server" after a couple of minutes.
    Following is a list of things I tried:
    1) Set up a different Yahoo account:
    Works without a glitch, push enabled
    2) Try the original email account with wrong password:
    Gives a credential error, so password authentication is not the problem
    3) Manual configuration through selecting "Others" rather than "Yahoo Mail" in the add account menu:
    Unchecking "Use Verizon email gateway" makes it work, but without push. My phone is able to connect to Yahoo servers directly with the same exact settings
    I am pretty sure the problem is with the Verizon gateway server having a glitch with my email account. So someone in charge of that server has to go through the list of accounts set up and either reset or delete mine, so I can set it up again through my phone.
    I called Verizon support the other day and finally talked to a level 2 rep after having to do the restart, take battery out and all that nonsense. It took them a while to understand the actual situation. It's not their fault really, my problem is complicated and a level 2 rep simply does not have that kind of knowledge. They tried to connect me to Samsung representatives, which was a waste of time, because there is nothing wrong with the hardware as it works with a different yahoo account with no problems, and it also works when connecting to yahoo directly. After spending two and a half hours on the phone, and after the rep talked to her supervisor and the samsung reps to learn more about the verizon gateway server, she finally told me I was right about the issue, and assured me that they would fix it and call me within two hours.
    It has been two days, I haven't heard a thing.
    What frustrates me is that there wasn't a single person there who could even grasp what could be causing the issue. They had never heard about the email gateway, I had to explain to them. I am not mad that the level 2 rep or her supervisor didn't know, but I am pretty **bleep** that they could not put me in touch with a person who did.
    I know there is at least one person at Verizon who manages the gateway server, but the question is how can anyone contact him???
    Verizon keeps offering these new services that are really cool for the most part, but their support system is very disconnected from their engineers/technical staff. The customer service is unable to fix problems other than billing issues, and their answer for everything else is to "take the battery out and restart the phone".
    For now, I set up my account manually, without the Verizon email gateway, so I don't have "push" working. It's a shame because it is such an easy thing to fix only if I could get in touch with the right person.

    UPDATE:
    After waiting for about ten days, I tried setting up my e-mail the regular way (by selecting yahoo mail) again yesterday. To my surprise, it went through without a glitch. I guess the cache of the gateway server must have been reset.
    I have been enjoying push for yahoo mail for the last 24 hours again. But I just noticed now, that the problems might be starting again. There are recent e-mails that don't show up on my phone, but do through yahoo's web mail page. When I select "refresh" through the menu on the phone, I see the circle in the top corner spinning for as long as I wait, but the e-mails don't get downloaded. That is exactly how my problems had started in the first place. I will give it the benefit of the doubt and wait and hope that it fixes itself.
    There might be a compatibility problem with yahoo servers and the verizon email gateway because I have two gmail accounts set up with the stock e-mail the same way, both using verizon's gateway server for push, and they have both been working with no problems for almost a month. (Even though sometimes the "push" is delayed by up to 5-10 min, most of the time it is within a couple of minutes and that's fine, I'm not that picky) And when I do "refresh", ti only takes a few seconds to complete the request.
    And I still haven't heard anything from Verizon.

Maybe you are looking for