Problem with sudo

Hi. I'm setting up my ArchLinux 8.1.07 distro and I'm running into issues with sudo. I installed sudo through pacman, and now after I added myself to the /etc/sudoers file, it doesn't request a password for me. I do not have the NOPASSWRD option enabled.
excerpt from my sudoers file:
dburban ALL=(ALL) ALL
On all of my previous linux setups, I was asked for the password everytime I logged in and out, or restarted. Arch doesn't ask even if i reboot. The only way I got it to ask for the password was to delete my user and set it up again. But it didn't solve the problem, it just asked for the password once, and now doesn't ask for it anymore.
Specs: Thinkpad T61
14"
1gb DDR2
80gb HD
Intel 4965AGN
Thanks in advance

I guess it is on a timeout system. I guess I never knew that because I never had to use it much, and then restart.
# sudoers file.
# This file MUST be edited with the 'visudo' command as root.
# See the sudoers man page for the details on how to write a sudoers file.
# Host alias specification
# User alias specification
# Cmnd alias specification
# Defaults specification
# Runas alias specification
# User privilege specification
root ALL=(ALL) SETENV: ALL
# Uncomment to allow people in group wheel to run all commands
# and set environment variables.
# %wheel ALL=(ALL) SETENV: ALL
# Same thing without a password
# %wheel ALL=(ALL) NOPASSWD: SETENV: ALL
# Samples
# %users ALL=/sbin/mount /cdrom,/sbin/umount /cdrom
# %users localhost=/sbin/shutdown -h now
dburban ALL=(ALL) ALL

Similar Messages

  • I'm having a problem with sudo

    Whenever I do anything with sudo in terminal, it comes up with this:
    sudo: /opt/local/etc/sudoers is mode 0444, should be 0440
    sudo: no valid sudoers sources found, quitting
    I use sudo quite a bit, so I need some help fixing it pretty quickly.

    Okay, I did that. Now it says:
    /opt/local/etc/sudoers: /etc/sudoers.d near line 102 <<<</div>
    sudo: parse error in /opt/local/etc/sudoers near line 102
    sudo: no valid sudoers sources found, quitting

  • Devtools update causes problems with sudo when used in a script?

    I'm a little confused by this one, but I'm not convinced that it's a bug.. yet.
    Long story short, I compile packages using the ABS via a script/wrapper which uses devtools. The script is available here: https://github.com/WorMzy/compilepackage
    Now, this script is far from perfect, but has worked perfectly well (in various states of completeness) for the past year or so. However, with the recent update of devtools (20120720-1 => 20121013-1), my script fails to execute correctly. After entering the password when prompted (by sudo, at this line: https://github.com/WorMzy/compilepackag … tions#L107), the script terminates unexpectedly.
    Downgrading devtools "fixes" this problem, but I'm not sure if this is a bug in devtools, sudo, zsh, my script, or something else.
    Here is the full output from the compilation of "arch-install-scripts":
    build@sakura[pts/10]:~/builds/devtools$ . ~/.scripts/compilepackage arch-install-scripts
    ==> Downloading sources
    ==> arch-install-scripts directory already exist. Replace ? [Y/n]
    ==> Download arch-install-scripts sources
    receiving file list ... done
    sent 28 bytes received 70 bytes 39.20 bytes/sec
    total size is 656 speedup is 6.69
    :: Synchronizing package databases...
    core is up to date
    extra is up to date
    community is up to date
    :: Starting full system upgrade...
    there is nothing to do
    ==> Building in chroot for [extra] (x86_64)...
    ==> Creating clean working copy...done
    ==> Making package: arch-install-scripts 8-1 (Fri Oct 19 23:45:52 BST 2012)
    ==> Checking runtime dependencies...
    ==> Checking buildtime dependencies...
    ==> Retrieving Sources...
    -> Found arch-install-scripts-8.tar.gz
    -> Found arch-install-scripts-8.tar.gz.sig
    ==> Validating source files with md5sums...
    arch-install-scripts-8.tar.gz ... Passed
    arch-install-scripts-8.tar.gz.sig ... Passed
    ==> Verifying source file signatures with gpg...
    arch-install-scripts-8.tar.gz ... FAILED (unknown public key 1EB2638FF56C0C53)
    ==> WARNING: Warnings have occurred while verifying the signatures.
    Please make sure you really trust them.
    ==> Extracting Sources...
    -> Extracting arch-install-scripts-8.tar.gz with bsdtar
    ==> Starting build()...
    make: Entering directory `/build/src/arch-install-scripts-8'
    GEN arch-chroot
    GEN genfstab
    GEN pacstrap
    make: Leaving directory `/build/src/arch-install-scripts-8'
    ==> Entering fakeroot environment...
    ==> Starting package()...
    make: Entering directory `/build/src/arch-install-scripts-8'
    install -dm755 /build/pkg/usr/bin
    install -m755 arch-chroot genfstab pacstrap /build/pkg/usr/bin
    install -Dm644 zsh-completion /build/pkg/usr/share/zsh/site-functions/_archinstallscripts
    make: Leaving directory `/build/src/arch-install-scripts-8'
    ==> Tidying install...
    -> Purging unwanted files...
    -> Compressing man and info pages...
    -> Stripping unneeded symbols from binaries and libraries...
    ==> Creating package...
    -> Generating .PKGINFO file...
    -> Compressing package...
    ==> Leaving fakeroot environment.
    ==> Finished making: arch-install-scripts 8-1 (Fri Oct 19 23:45:54 BST 2012)
    ==> Installing package arch-install-scripts with pacman -U...
    loading packages...
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): arch-install-scripts-8-1
    Total Installed Size: 0.03 MiB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [######################################################################] 100%
    (1/1) loading package files [######################################################################] 100%
    (1/1) checking for file conflicts [######################################################################] 100%
    (1/1) installing arch-install-scripts [######################################################################] 100%
    resolving dependencies...
    looking for inter-conflicts...
    Targets (5): elfutils-0.155-1 pyalpm-0.5.3-2 python-3.3.0-1 python-pyelftools-0.20-2 namcap-3.2.4-2
    Total Installed Size: 99.58 MiB
    Proceed with installation? [Y/n]
    (5/5) checking package integrity [######################################################################] 100%
    (5/5) loading package files [######################################################################] 100%
    (5/5) checking for file conflicts [######################################################################] 100%
    (1/5) installing python [######################################################################] 100%
    Optional dependencies for python
    tk: for tkinter
    sqlite
    (2/5) installing pyalpm [######################################################################] 100%
    (3/5) installing elfutils [######################################################################] 100%
    (4/5) installing python-pyelftools [######################################################################] 100%
    (5/5) installing namcap [######################################################################] 100%
    Checking PKGBUILD
    Checking arch-install-scripts-8-1-any.pkg.tar.xz
    arch-install-scripts W: Dependency bash included but already satisfied
    arch-install-scripts W: Dependency included and not needed ('coreutils')
    arch-install-scripts W: Dependency included and not needed ('pacman')
    arch-install-scripts W: Dependency included and not needed ('util-linux')
    ==> Compilation complete, installing...
    Password:
    loading packages...
    warning: arch-install-scripts-8-1 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): arch-install-scripts-8-1
    Total Installed Size: 0.03 MiB
    Net Upgrade Size: 0.00 MiB
    Proceed with installation? [Y/n] % build@sakura[pts/10]:~/builds/arch-install-scripts$
    That "%" is inverted, just like what you get when you run
    echo -n "text"
    in zsh. Incidentally, here is my .zshrc: https://github.com/WorMzy/Config-files/ … ter/.zshrc, however, the problem persists with a new user with an unconfigured zsh.
    Here is my sudoers too:
    ## sudoers file.
    ## This file MUST be edited with the 'visudo' command as root.
    ## Failure to use 'visudo' may result in syntax or file permission errors
    ## that prevent sudo from running.
    ## See the sudoers man page for the details on how to write a sudoers file.
    ## Host alias specification
    ## Groups of machines. These may include host names (optionally with wildcards),
    ## IP addresses, network numbers or netgroups.
    # Host_Alias WEBSERVERS = www1, www2, www3
    ## User alias specification
    ## Groups of users. These may consist of user names, uids, Unix groups,
    ## or netgroups.
    # User_Alias ADMINS = millert, dowdy, mikef
    ## Cmnd alias specification
    ## Groups of commands. Often used to group related commands together.
    # Cmnd_Alias PROCESSES = /usr/bin/nice, /bin/kill, /usr/bin/renice, \
    # /usr/bin/pkill, /usr/bin/top
    ## Defaults specification
    ## You may wish to keep some of the following environment variables
    ## when running commands via sudo.
    ## Locale settings
    # Defaults env_keep += "LANG LANGUAGE LINGUAS LC_* _XKB_CHARSET"
    ## Run X applications through sudo; HOME is used to find the
    ## .Xauthority file. Note that other programs use HOME to find
    ## configuration files and this may lead to privilege escalation!
    # Defaults env_keep += "HOME"
    ## X11 resource path settings
    # Defaults env_keep += "XAPPLRESDIR XFILESEARCHPATH XUSERFILESEARCHPATH"
    ## Desktop path settings
    # Defaults env_keep += "QTDIR KDEDIR"
    ## Allow sudo-run commands to inherit the callers' ConsoleKit session
    # Defaults env_keep += "XDG_SESSION_COOKIE"
    ## Uncomment to enable special input methods. Care should be taken as
    ## this may allow users to subvert the command being run via sudo.
    # Defaults env_keep += "XMODIFIERS GTK_IM_MODULE QT_IM_MODULE QT_IM_SWITCHER"
    ## Uncomment to enable logging of a command's output, except for
    ## sudoreplay and reboot. Use sudoreplay to play back logged sessions.
    # Defaults log_output
    # Defaults!/usr/bin/sudoreplay !log_output
    # Defaults!/usr/local/bin/sudoreplay !log_output
    # Defaults!/sbin/reboot !log_output
    Defaults timestamp_timeout=0,passwd_timeout=0,passprompt="Password:",badpass_message="Incorrect password",editor=/usr/bin/vim:/usr/bin/vi,targetpw
    ## Runas alias specification
    ## User privilege specification
    root ALL=(ALL) ALL
    build sakura=/usr/bin/pacman-color -U *,/usr/bin/pacman-color -Sy,/usr/bin/pacman-color -Syy
    build sakura=/usr/bin/pacman -U *
    build sakura=NOPASSWD: /usr/bin/extra-x86_64-build,/usr/bin/multilib-build,/usr/sbin/makechrootpkg
    ## Uncomment to allow members of group wheel to execute any command
    %wheel sakura=(ALL) ALL
    ## Same thing without a password
    #%wheel ALL=(ALL) NOPASSWD: /sbin/sdshutdown, /sbin/sdreboot
    ## Uncomment to allow members of group sudo to execute any command
    # %sudo ALL=(ALL) ALL
    ## Uncomment to allow any user to run sudo if they know the password
    ## of the user they are running the command as (root by default).
    # Defaults targetpw # Ask for the password of the target user
    # ALL ALL=(ALL) ALL # WARNING: only use this together with 'Defaults targetpw'
    ## Read drop-in files from /etc/sudoers.d
    ## (the '#' here does not indicate a comment)
    #includedir /etc/sudoers.d
    Further information will be provided on request. Suggestions for improving the script will also be appreciated.
    Thanks.

    Update: It appears that the cause is systemd's nspawn. Disabling it in mkarchroot (have_nspawn=0) resolves the problem.
    However, I don't understand why it's causing this behaviour. User input works fine for the sudo password prompt, but then fails for the pacman user prompt? Do they use different input buffers or something? Does that question even make sense?
    Anyway, I'll open a bug report on flyspray and upstream about this when I get the chance.

  • Problem with sudo - sudoers is mode 0604, should be 0440

    ryans-imac-2:~ Ryan$ sudo chmod -RN /.vol
    sudo: /private/etc/sudoers is mode 0604, should be 0440
    ryans-imac-2:~ Ryan$ postdrop: warning: unable to look up public/pickup: No such file or directory
    Please advise.

    There is a '-N' option for chmod -- it's for removing ACL's.
    The best way to learn is not to make random changes that you don't understand, and then ask for help in public forums when something goes wrong. Set yourself a constructive problem to solve; for instance, by writing a shell script. Read man pages. Read UNIX books.
    You say you want to grant permissions to the current user. Which permissions -- read, write, execute, all? Do you mean ownership? ACL's? Recursive? Sticky or SUID bits? What permissions should other users have? First learn how to ask the right question, then you'll most likely be able to answer it yourself. Start with the chmod(1) man page. When you understand everything on that page, you'll know quite a lot.
    Meanwhile you might be able to repair the damage you'be already done by running the "Repair permissions" routine from Disk Utility. This would be one of the few situations where it's actually useful.

  • Problems with sudo on Solaris 8

    Greetings all,
    I am trying to set up user accounts with scripts that will restart services, should they fail. I am setting up the default shell as the script that I want to have run when they log in and at the completion it will kick them off. A nice secure way to get things going again without our network operations people getting their hands dirty.
    I am attempting to use sudo for this and it keeps asking for a password even though I have put in the ALL=NOPASSWD tag in the sudoers file for this users entry. When I enter the users password it is not correct and when I enter root it is not correct and in the end it will not run the script. I need to somehow bypass this asking of a password and get sudo to run the command. This is to restart our SunOne messaging server and will likely be applied to various other processes.
    Any suggestions are appreciated. I have checked the sudo site and checked the config.h from the compile and had no luck so it is not the shadow passwords issue that they list on their support site. I also tried to download and use the precompiled package that they had on SunFreeware, but that will not install on to any of these servers... can't get pkgadd to acknowledge it as a solaris package.
    Thank you in advance!
    Lee Stevens

    Try to remove this disk from server and insert in again.
    Then run devfsadm command.

  • [SOLVED] Annoying problem with sudo

    I tried googling this, but finding the correct search has eluded me.
    Suddenly, sudo requires me to enter my password correctly three times (i.e. If I type correctly, I'm asked three times, if I get it wrong on the first go, it's four times and so on). This has only started in the past week.
    Any ideas how to fix it?
    TIA
    Last edited by Roken (2014-03-17 19:07:11)

    In fact, sudoers was the problem. I have no idea how (since I haven't touched it lately) but the timeout had got itself set to 363636363636363636363636363636363636363636363636363636363, which I'm guessing resolved to an immediate timeout.
    Reset and all is good again
    Thanks all

  • Problems with Steam - Dota2 and ETS2

    Hello
    I had never problems with Arch + xfce but last time I made fresh install of Arch with KDE and problems begins. Strange logs in steam running Dota 2 and Euro Truck Simulator 2. Dota 2 freezing, jumping even 60+ fps, both games can freeze for 1 min with sound.
    Lenovo Y580 - GTX660M
    After running Dota 2 with launch options (optirun -b primus %command% -console) output from console:
    Game update: AppID 570 "Dota 2", ProcID 1441, IP 0.0.0.0:0
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    pid 1455 != 1454, skipping destruction (fork without exec?)
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
    Installing breakpad exception handler for appid(gameoverlayui)/version(20140715181500_client)
    Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
    Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    [0725/222647:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
    [0725/222647:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
    Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
    Using breakpad crash handler
    Setting breakpad minidump AppID = 570
    Forcing breakpad minidump interfaces to load
    Looking up breakpad interfaces from steamclient
    Calling BreakpadMiniDumpSystemInit
    Looking up breakpad interfaces from steamclient
    Calling BreakpadMiniDumpSystemInit
    Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded yes]
    Steam_SetMinidumpSteamID: Setting Steam ID: 76561198074650116
    SDL video target is 'x11'
    SDL failed to create GL compatibility profile (whichProfile=0!
    This system supports the OpenGL extension GL_EXT_framebuffer_object.
    This system supports the OpenGL extension GL_EXT_framebuffer_blit.
    This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
    This system DOES NOT support the OpenGL extension GL_APPLE_fence.
    This system supports the OpenGL extension GL_NV_fence.
    This system supports the OpenGL extension GL_ARB_sync.
    This system supports the OpenGL extension GL_EXT_draw_buffers2.
    This system supports the OpenGL extension GL_EXT_bindable_uniform.
    This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
    This system supports the OpenGL extension GL_ARB_map_buffer_range.
    This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
    This system supports the OpenGL extension GL_ARB_occlusion_query.
    This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
    This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
    This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
    This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
    This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
    This system supports the OpenGL extension GL_ARB_framebuffer_object.
    This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
    This system supports the OpenGL extension GL_ARB_debug_output.
    This system supports the OpenGL extension GL_EXT_direct_state_access.
    This system supports the OpenGL extension GL_NV_bindless_texture.
    This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
    This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
    This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
    This system supports the OpenGL extension GL_NVX_gpu_memory_info.
    This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
    This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
    This system supports the OpenGL extension GL_EXT_texture_compression_dxt1.
    This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt3.
    This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt5.
    This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
    GL_NV_bindless_texture: DISABLED
    GL_AMD_pinned_memory: DISABLED
    GL_EXT_texture_sRGB_decode: AVAILABLE
    GL_NVX_gpu_memory_info: AVAILABLE
    GL_ATI_meminfo: UNAVAILABLE
    GL_NVX_gpu_memory_info: Total Dedicated: 2097152, Total Avail: 2097152, Current Avail: 2076116
    GL_MAX_SAMPLES_EXT: 32
    Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/sound_vo_english
    Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/pak01
    Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/platform/pak01
    Did not detect any valid joysticks.
    WARNING: unable to link Test_StartScript and Test_StartScript because one or more is a ConCommand.
    WARNING: unable to link Test_RandomChance and Test_RandomChance because one or more is a ConCommand.
    WARNING: unable to link Test_LoopForNumSeconds and Test_LoopForNumSeconds because one or more is a ConCommand.
    WARNING: unable to link Test_Loop and Test_Loop because one or more is a ConCommand.
    WARNING: unable to link Test_LoopCount and Test_LoopCount because one or more is a ConCommand.
    WARNING: unable to link Test_StartLoop and Test_StartLoop because one or more is a ConCommand.
    WARNING: unable to link log_flags and log_flags because one or more is a ConCommand.
    WARNING: unable to link log_color and log_color because one or more is a ConCommand.
    WARNING: unable to link log_verbosity and log_verbosity because one or more is a ConCommand.
    WARNING: unable to link log_level and log_level because one or more is a ConCommand.
    WARNING: unable to link log_dumpchannels and log_dumpchannels because one or more is a ConCommand.
    Load a scaleform font provider?
    Creating D3D9 device with D3DCREATE_MULTITHREADED
    IDirect3DDevice9::Create: BackBufWidth: 1366, BackBufHeight: 768, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
    GL sampler object usage: DISABLED
    ##### swap interval = 0 swap limit = 1 #####
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
    Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
    !! Controller config file passed by steamworks game 570 did not exist at /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/cfg/controller.vdf
    Installing breakpad exception handler for appid(steam)/version(1405474565_client)
    [0725/222707:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
    [0725/222707:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
    Im not able to run ETS 2 it's going to change resolution to 1024x768 in whole desktop and then crash. (Launch option: optirun -b primus %command%) output:
    Game update: AppID 227300 "Euro Truck Simulator 2", ProcID 1554, IP 0.0.0.0:0
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    (steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
    ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
    Setting breakpad minidump AppID = 227300
    Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded no]
    Registered appid 227300 to use native controller config at /home/akikyo/.local/share/Steam/SteamApps/common/Euro Truck Simulator 2/controller.vdf
    X Error of failed request: GLXUnsupportedPrivateRequest
    Major opcode of failed request: 155 (GLX)
    Minor opcode of failed request: 16 (X_GLXVendorPrivate)
    Serial number of failed request: 80
    Current serial number in output stream: 82
    Game removed: AppID 227300 "Euro Truck Simulator 2", ProcID 1567
    sudo journalctl
    Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508930] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508943] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508969] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
    Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508984] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    Jul 25 22:35:16 lenovo kernel: eurotrucks2[1567]: segfault at 17 ip 00007f40f1e30433 sp 00007fff05479db0 error 6 in steamclient.so[7f40f1b66000+f7b000]
    Jul 25 22:35:16 lenovo kernel: [drm] Module unloaded
    Jul 25 22:35:16 lenovo kernel: bbswitch: disabling discrete graphics
    Jul 25 22:35:16 lenovo kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140214/nsarguments-95)
    Jul 25 22:35:16 lenovo kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838215] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838233] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838238] [ERROR][XORG] (EE) Backtrace:
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838242] [ERROR][XORG] (EE) 0: Xorg (xorg_backtrace+0x56) [0x58f186]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838245] [ERROR][XORG] (EE) 1: Xorg (0x400000+0x192fc9) [0x592fc9]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838249] [ERROR][XORG] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd21c5c8000+0xf4b0) [0x7fd21c5d74b0]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838256] [ERROR][XORG] (EE) 3: /usr/lib/libc.so.6 (malloc_usable_size+0x25) [0x7fd21b290d25]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838272] [ERROR][XORG] (EE) 4: /usr/lib/nvidia/libGL.so.1 (0x7fd21818b000+0xb61d9) [0x7fd2182411d9]
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838286] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838298] [ERROR][XORG] (EE) Segmentation fault at address 0x0
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838306] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838317] [ERROR][XORG] (EE) Caught signal 11 (Segmentation fault). Server aborting
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838320] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838323] [ERROR][XORG] (EE)
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838329] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
    Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838334] [ERROR][XORG] (EE)
    sudo nano /var/log/Xorg.8.log
    X.Org X Server 1.15.2
    Release Date: 2014-06-27
    [ 887.399] X Protocol Version 11, Revision 0
    [ 887.399] Build Operating System: Linux 3.15.1-1-ARCH x86_64
    [ 887.399] Current Operating System: Linux lenovo 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64
    [ 887.399] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a89135f9-ef1e-4b90-a073-ee78d492b58a rw rcutree.rcu_idle_gp_delay=1 quiet
    [ 887.399] Build Date: 27 June 2014 07:32:26PM
    [ 887.399]
    [ 887.399] Current version of pixman: 0.32.6
    [ 887.399] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 887.399] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 887.399] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jul 25 22:35:11 2014
    [ 887.400] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
    [ 887.400] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
    [ 887.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [ 887.400] (==) ServerLayout "Layout0"
    [ 887.400] (==) No screen section available. Using defaults.
    [ 887.400] (**) |-->Screen "Default Screen Section" (0)
    [ 887.400] (**) | |-->Monitor "<default monitor>"
    [ 887.400] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 887.400] (**) | |-->Device "DiscreteNvidia"
    [ 887.400] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 887.400] (**) Option "AutoAddDevices" "false"
    [ 887.400] (**) Option "AutoAddGPU" "false"
    [ 887.400] (**) Not automatically adding devices
    [ 887.400] (==) Automatically enabling devices
    [ 887.400] (**) Not automatically adding GPU devices
    [ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 887.401] Entry deleted from font path.
    [ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 887.401] Entry deleted from font path.
    [ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 887.401] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/OTF/,
    /usr/share/fonts/Type1/
    [ 887.401] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
    [ 887.401] (==) |-->Input Device "<default pointer>"
    [ 887.401] (==) |-->Input Device "<default keyboard>"
    [ 887.401] (==) The core pointer device wasn't specified explicitly in the layout.
    Using the default mouse configuration.
    [ 887.401] (==) The core keyboard device wasn't specified explicitly in the layout.
    Using the default keyboard configuration.
    [ 887.401] (II) Loader magic: 0x811cc0
    [ 887.401] (II) Module ABI versions:
    [ 887.401] X.Org ANSI C Emulation: 0.4
    [ 887.401] X.Org Video Driver: 15.0
    [ 887.401] X.Org XInput driver : 20.0
    [ 887.401] X.Org Server Extension : 8.0
    [ 887.401] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 887.401] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 887.401] setversion 1.4 failed: Permission denied
    [ 887.403] (--) PCI:*(0:1:0:0) 10de:0fd4:17aa:3977 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
    [ 887.403] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 887.403] Initializing built-in extension Generic Event Extension
    [ 887.404] Initializing built-in extension SHAPE
    [ 887.404] Initializing built-in extension MIT-SHM
    [ 887.404] Initializing built-in extension XInputExtension
    [ 887.404] Initializing built-in extension XTEST
    [ 887.404] Initializing built-in extension BIG-REQUESTS
    [ 887.404] Initializing built-in extension SYNC
    [ 887.404] Initializing built-in extension XKEYBOARD
    [ 887.404] Initializing built-in extension XC-MISC
    [ 887.404] Initializing built-in extension SECURITY
    [ 887.404] Initializing built-in extension XINERAMA
    [ 887.404] Initializing built-in extension XFIXES
    [ 887.404] Initializing built-in extension RENDER
    [ 887.404] Initializing built-in extension RANDR
    [ 887.404] Initializing built-in extension COMPOSITE
    [ 887.404] Initializing built-in extension DAMAGE
    [ 887.404] Initializing built-in extension MIT-SCREEN-SAVER
    [ 887.404] Initializing built-in extension DOUBLE-BUFFER
    [ 887.404] Initializing built-in extension RECORD
    [ 887.404] Initializing built-in extension DPMS
    [ 887.404] Initializing built-in extension Present
    [ 887.404] Initializing built-in extension DRI3
    [ 887.404] Initializing built-in extension X-Resource
    [ 887.404] Initializing built-in extension XVideo
    [ 887.404] Initializing built-in extension XVideo-MotionCompensation
    [ 887.404] Initializing built-in extension XFree86-VidModeExtension
    [ 887.404] Initializing built-in extension XFree86-DGA
    [ 887.404] Initializing built-in extension XFree86-DRI
    [ 887.404] Initializing built-in extension DRI2
    [ 887.404] (II) "glx" will be loaded by default.
    [ 887.404] (II) LoadModule: "dri2"
    [ 887.404] (II) Module "dri2" already built-in
    [ 887.404] (II) LoadModule: "glamoregl"
    [ 887.404] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
    [ 887.454] (II) Module glamoregl: vendor="X.Org Foundation"
    [ 887.454] compiled for 1.15.0, module version = 0.6.0
    [ 887.454] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 887.454] (II) LoadModule: "glx"
    [ 887.454] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
    [ 887.495] (II) Module glx: vendor="NVIDIA Corporation"
    [ 887.495] compiled for 4.0.2, module version = 1.0.0
    [ 887.495] Module class: X.Org Server Extension
    [ 887.495] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
    [ 887.495] Loading extension GLX
    [ 887.495] (II) LoadModule: "nvidia"
    [ 887.495] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 887.500] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 887.500] compiled for 4.0.2, module version = 1.0.0
    [ 887.500] Module class: X.Org Video Driver
    [ 887.500] (II) LoadModule: "mouse"
    [ 887.500] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 887.502] (II) Module mouse: vendor="X.Org Foundation"
    [ 887.502] compiled for 1.15.0, module version = 1.9.0
    [ 887.502] Module class: X.Org XInput Driver
    [ 887.502] ABI class: X.Org XInput driver, version 20.0
    [ 887.502] (II) LoadModule: "kbd"
    [ 887.502] (WW) Warning, couldn't open module kbd
    [ 887.502] (II) UnloadModule: "kbd"
    [ 887.502] (II) Unloading kbd
    [ 887.502] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 887.502] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
    [ 887.502] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 887.502] (--) using VT number 1
    [ 887.502] (II) Loading sub module "fb"
    [ 887.502] (II) LoadModule: "fb"
    [ 887.502] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 887.504] (II) Module fb: vendor="X.Org Foundation"
    [ 887.504] compiled for 1.15.2, module version = 1.0.0
    [ 887.504] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 887.504] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 887.504] (II) Loading sub module "wfb"
    [ 887.504] (II) LoadModule: "wfb"
    [ 887.504] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 887.506] (II) Module wfb: vendor="X.Org Foundation"
    [ 887.506] compiled for 1.15.2, module version = 1.0.0
    [ 887.506] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 887.506] (II) Loading sub module "ramdac"
    [ 887.506] (II) LoadModule: "ramdac"
    [ 887.506] (II) Module "ramdac" already built-in
    [ 887.506] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 887.506] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 887.506] (==) NVIDIA(0): RGB weight 888
    [ 887.506] (==) NVIDIA(0): Default visual is TrueColor
    [ 887.506] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 887.506] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 887.506] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
    [ 887.507] (**) NVIDIA(0): Option "UseEDID" "false"
    [ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
    [ 887.507] (**) NVIDIA(0): Enabling 2D acceleration
    [ 887.507] (**) NVIDIA(0): Ignoring EDIDs
    [ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
    [ 887.507] (**) NVIDIA(0): mode
    [ 891.006] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
    [ 891.008] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660M (GK107) at PCI:1:0:0 (GPU-0)
    [ 891.008] (--) NVIDIA(0): Memory: 2097152 kBytes
    [ 891.008] (--) NVIDIA(0): VideoBIOS: 80.07.3c.00.16
    [ 891.008] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 891.008] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660M at PCI:1:0:0
    [ 891.008] (--) NVIDIA(0): none
    [ 891.008] (II) NVIDIA(0): Validated MetaModes:
    [ 891.008] (II) NVIDIA(0): "NULL"
    [ 891.008] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
    [ 891.008] (WW) NVIDIA(0): Unable to get display device for DPI computation.
    [ 891.008] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
    [ 891.008] (--) Depth 24 pixmap format is 32 bpp
    [ 891.008] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [ 891.008] (II) NVIDIA: access.
    [ 891.013] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 891.013] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 891.013] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 891.013] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 891.013] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 891.013] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 891.013] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 891.013] (II) NVIDIA(0): Config Options in the README.
    [ 891.013] (II) NVIDIA(0): Setting mode "NULL"
    [ 891.028] Loading extension NV-GLX
    [ 891.035] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 891.035] (==) NVIDIA(0): Backing store enabled
    [ 891.035] (==) NVIDIA(0): Silken mouse enabled
    [ 891.035] (==) NVIDIA(0): DPMS enabled
    [ 891.035] Loading extension NV-CONTROL
    [ 891.036] (II) Loading sub module "dri2"
    [ 891.036] (II) LoadModule: "dri2"
    [ 891.036] (II) Module "dri2" already built-in
    [ 891.036] (II) NVIDIA(0): [DRI2] Setup complete
    [ 891.036] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 891.036] (--) RandR disabled
    [ 891.044] (II) Initializing extension GLX
    [ 891.100] (II) Using input driver 'mouse' for '<default pointer>'
    [ 891.100] (**) Option "CorePointer" "on"
    [ 891.100] (**) <default pointer>: always reports core events
    [ 891.100] (WW) <default pointer>: No Device specified, looking for one...
    [ 891.146] (II) <default pointer>: Setting Device option to "/dev/input/mice"
    [ 891.146] (--) <default pointer>: Device: "/dev/input/mice"
    [ 891.146] (==) <default pointer>: Protocol: "Auto"
    [ 891.146] (**) <default pointer>: always reports core events
    [ 891.146] (**) Option "Device" "/dev/input/mice"
    [ 891.200] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
    [ 891.200] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
    [ 891.200] (**) <default pointer>: Buttons: 9
    [ 891.200] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
    [ 891.200] (**) <default pointer>: (accel) keeping acceleration scheme 1
    [ 891.200] (**) <default pointer>: (accel) acceleration profile 0
    [ 891.200] (**) <default pointer>: (accel) acceleration factor: 2.000
    [ 891.200] (**) <default pointer>: (accel) acceleration threshold: 4
    [ 891.200] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
    [ 891.493] (II) <default pointer>: ps2EnableDataReporting: succeeded
    [ 891.493] (II) LoadModule: "kbd"
    [ 891.494] (WW) Warning, couldn't open module kbd
    [ 891.494] (II) UnloadModule: "kbd"
    [ 891.494] (II) Unloading kbd
    [ 891.494] (EE) Failed to load module "kbd" (module does not exist, 0)
    [ 891.494] (EE) No input driver matching `kbd'
    [ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 891.497] (II) AutoAddDevices is off - not adding device.
    [ 891.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
    [ 891.497] (II) AutoAddDevices is off - not adding device.
    [ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 891.497] (II) AutoAddDevices is off - not adding device.
    [ 891.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 891.498] (II) AutoAddDevices is off - not adding device.
    [ 891.498] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
    [ 891.498] (II) AutoAddDevices is off - not adding device.
    [ 891.498] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 891.498] (II) AutoAddDevices is off - not adding device.
    [ 891.499] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 891.499] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 891.499] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 891.499] setversion 1.4 failed: Permission denied
    [ 891.499] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
    [ 891.499] (II) AutoAddDevices is off - not adding device.
    [ 891.500] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 891.500] (II) AutoAddDevices is off - not adding device.
    [ 891.500] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event8)
    [ 891.500] (II) AutoAddDevices is off - not adding device.
    [ 891.501] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event9)
    [ 891.501] (II) AutoAddDevices is off - not adding device.
    [ 891.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
    [ 891.501] (II) AutoAddDevices is off - not adding device.
    [ 891.501] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
    [ 891.501] (II) AutoAddDevices is off - not adding device.
    [ 891.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
    [ 891.502] (II) AutoAddDevices is off - not adding device.
    [ 891.502] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
    [ 891.502] (II) AutoAddDevices is off - not adding device.
    [ 891.502] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
    [ 891.502] (II) AutoAddDevices is off - not adding device.
    [ 891.503] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
    [ 891.503] (II) AutoAddDevices is off - not adding device.
    [ 891.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
    [ 891.503] (II) AutoAddDevices is off - not adding device.
    [ 891.503] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
    [ 891.504] (II) AutoAddDevices is off - not adding device.
    [ 891.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 891.504] (II) AutoAddDevices is off - not adding device.
    [ 891.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
    [ 891.504] (II) AutoAddDevices is off - not adding device.
    [ 892.695] (II) UnloadModule: "mouse"
    [ 892.720] (II) NVIDIA(GPU-0): Deleting GPU-0
    [ 892.723] (EE) Server terminated successfully (0). Closing log file.
    Last edited by Akikyo (2014-07-24 21:04:45)

    I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
    eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
    Or maybe it's missing a lib (you may need to install 32bit versions):
    ldd /path/to/eurotrucks
    to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
    And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
    Have a good look though: https://wiki.archlinux.org/index.php/Steam
    and remember to check for missing 32bit libs.

  • [Solved] Problem with upgrading polkit or filesystem

    Ok so first off they do "upgrade" but the problem has me worried that something is wrong.
    A week or so ago after converting to systemd I tried getting rid of ConsoleKit and installing polkit 0.107 from the [testing] repo but it caused pacman to get stuck at "(1/1) upgrading polkit"  So I tried that a couple of times but I could never get pacman to finish and get past that.  I had to control + c to get out of that then type exit in the console (no text was visible that I typed however but typing exit + enter worked for closing it).  So I then opened a new terminal and downgraded polkit back to 0.105 and waited for polkit to get pushed from testing to see if it would fix my issue.  Fast forward to today and I go to upgrade my system.  Among the 83 updates or so was polkit and filesystem.  What do you know it gets stuck at "(15/83) upgrading polkit".  Fuck so I control + c, open new terminal and then do the upgrade again and it continues to update but this time it gets stuck doing the same thing for filesystem.  I control + c, open new terminal and continue the upgrade until it finishes, which it does this time, and I reboot.
    I tried re-installing polkit again and filesystem again but they continue to get stuck.  I cannot "complete" the upgrade even though they show the appropriate version when I check.
    Terminal
    [507] shauder@arch-desktop [~] $ sudo pacman -S polkit
    warning: polkit-0.107-4 is up to date -- reinstalling
    resolving dependencies...
    looking for inter-conflicts...
    Targets (1): polkit-0.107-4
    Total Installed Size: 1.77 MiB
    Net Upgrade Size: 0.00 MiB
    Proceed with installation? [Y/n]
    (1/1) checking package integrity [########################################################] 100%
    (1/1) loading package files [########################################################] 100%
    (1/1) checking for file conflicts [########################################################] 100%
    (1/1) checking available disk space [########################################################] 100%
    (1/1) upgrading polkit
    /var/log/pacman.log
    [2012-07-18 18:27] installed filesystem (2012.6-4)
    [2012-07-18 18:27] installed findutils (4.4.2-4)
    [2012-07-18 18:27] installed gawk (4.0.1-1)
    [2012-07-18 18:27] installed gettext (0.18.1.1-4)
    [2012-07-18 18:27] installed grep (2.13-2)
    [2012-07-18 18:27] installed sed (4.2.1-4)
    [2012-07-18 18:27] installed grub (0.97-21)
    [2012-07-18 18:27] installed gzip (1.5-1)
    [2012-07-18 18:27] installed gdbm (1.10-1)
    [2012-07-18 18:27] installed perl (5.16.0-2)
    [2012-07-18 18:27] installed openssl (1.0.1.c-1)
    [2012-07-18 18:27] installed libsasl (2.1.23-9)
    [2012-07-18 18:27] installed libldap (2.4.31-4)
    [2012-07-18 18:27] installed keyutils (1.5.5-3)
    [2012-07-18 18:27] installed krb5 (1.10.2-2)
    [2012-07-18 18:27] installed heirloom-mailx (12.5-3)
    [2012-07-18 18:27] installed inetutils (1.9.1-2)
    [2012-07-18 18:27] installed iproute2 (3.4.0-2)
    [2012-07-18 18:27] installed sysvinit (2.88-6)
    [2012-07-18 18:27] installed initscripts (2012.06.3-2)
    [2012-07-18 18:27] installed sysfsutils (2.1.0-8)
    [2012-07-18 18:27] >> Traceroute is now provided by core/traceroute
    [2012-07-18 18:27] installed iputils (20101006-4)
    [2012-07-18 18:27] installed jfsutils (1.1.15-3)
    [2012-07-18 18:27] installed less (444-3)
    [2012-07-18 18:27] installed licenses (2.9-1)
    [2012-07-18 18:27] installed linux-firmware (20120625-1)
    [2012-07-18 18:27] installed mkinitcpio-busybox (1.20.1-1)
    [2012-07-18 18:27] installed expat (2.1.0-1)
    [2012-07-18 18:27] installed libarchive (3.0.4-1)
    [2012-07-18 18:27] installed mkinitcpio (0.9.2-2)
    [2012-07-18 18:27] >>> Updating module dependencies. Please wait ...
    [2012-07-18 18:27] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-18 18:27] ==> Building image from preset: 'default'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [autodetect]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] ==> Building image from preset: 'fallback'
    [2012-07-18 18:27] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-18 18:27] ==> Starting build: 3.4.5-1-ARCH
    [2012-07-18 18:27] -> Running build hook: [base]
    [2012-07-18 18:27] -> Running build hook: [udev]
    [2012-07-18 18:27] -> Running build hook: [pata]
    [2012-07-18 18:27] -> Running build hook: [scsi]
    [2012-07-18 18:27] -> Running build hook: [sata]
    [2012-07-18 18:27] -> Running build hook: [filesystems]
    [2012-07-18 18:27] -> Running build hook: [usbinput]
    [2012-07-18 18:27] -> Running build hook: [fsck]
    [2012-07-18 18:27] ==> Generating module dependencies
    [2012-07-18 18:27] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-18 18:27] bsdcpio: Failed to set default locale
    [2012-07-18 18:27] ==> Image generation successful
    [2012-07-18 18:27] installed linux (3.4.5-1)
    [2012-07-18 18:27] installed logrotate (3.8.1-2)
    [2012-07-18 18:27] installed lvm2 (2.02.96-3)
    [2012-07-18 18:27] installed texinfo (4.13a-7)
    [2012-07-18 18:27] installed groff (1.21-2)
    [2012-07-18 18:27] installed libpipeline (1.2.1-1)
    [2012-07-18 18:27] it's recommended to create an initial
    [2012-07-18 18:27] database running as root:
    [2012-07-18 18:27] "/usr/bin/mandb --quiet"
    [2012-07-18 18:27] installed man-db (2.6.2-1)
    [2012-07-18 18:27] installed man-pages (3.41-1)
    [2012-07-18 18:27] installed mdadm (3.2.5-2)
    [2012-07-18 18:27] installed nano (2.2.6-2)
    [2012-07-18 18:27] installed ca-certificates (20120623-1)
    [2012-07-18 18:27] installed libssh2 (1.4.2-1)
    [2012-07-18 18:27] installed curl (7.26.0-1)
    [2012-07-18 18:27] installed pth (2.0.7-4)
    [2012-07-18 18:27] installed libksba (1.2.0-2)
    [2012-07-18 18:27] installed libassuan (2.0.3-1)
    [2012-07-18 18:27] installed pinentry (0.8.1-4)
    [2012-07-18 18:27] installed dirmngr (1.1.0-4)
    [2012-07-18 18:27] installed gnupg (2.0.19-2)
    [2012-07-18 18:27] installed gpgme (1.3.1-4)
    [2012-07-18 18:27] installed pacman-mirrorlist (20120626-1)
    [2012-07-18 18:27] installed archlinux-keyring (20120622-1)
    [2012-07-18 18:27] >>> Run `pacman-key --init; pacman-key --populate archlinux`
    [2012-07-18 18:27] >>> to import the data required by pacman for package verification.
    [2012-07-18 18:27] >>> See: https://www.archlinux.org/news/having-pacman-verify-packages
    [2012-07-18 18:27] installed pacman (4.0.3-3)
    [2012-07-18 18:27] installed pciutils (3.1.10-1)
    [2012-07-18 18:27] installed pcmciautils (018-4)
    [2012-07-18 18:27] installed libnl (3.2.11-1)
    [2012-07-18 18:27] installed libusbx (1.0.12-2)
    [2012-07-18 18:27] installed libpcap (1.3.0-1)
    [2012-07-18 18:27] installed ppp (2.4.5-3)
    [2012-07-18 18:27] installed procps-ng (3.3.3-3)
    [2012-07-18 18:27] installed psmisc (22.19-1)
    [2012-07-18 18:27] installed reiserfsprogs (3.6.21-4)
    [2012-07-18 18:27] installed shadow (4.1.5.1-1)
    [2012-07-18 18:27] installed eventlog (0.2.12-3)
    [2012-07-18 18:27] installed syslog-ng (3.3.5-2)
    [2012-07-18 18:27] installed tar (1.26-2)
    [2012-07-18 18:27] installed usbutils (006-1)
    [2012-07-18 18:27] installed vi (1:050325-2)
    [2012-07-18 18:27] installed wget (1.13.4-1)
    [2012-07-18 18:27] installed which (2.20-5)
    [2012-07-18 18:27] installed dbus-core (1.6.2-2)
    [2012-07-18 18:27] installed wpa_supplicant (1.0-1)
    [2012-07-18 18:27] installed xfsprogs (3.1.8-2)
    [2012-07-18 18:27] installed m4 (1.4.16-2)
    [2012-07-18 18:27] installed autoconf (2.69-1)
    [2012-07-18 18:27] installed automake (1.12.2-1)
    [2012-07-18 18:27] installed binutils (2.22-9)
    [2012-07-18 18:27] installed bison (2.5.1-1)
    [2012-07-18 18:27] installed fakeroot (1.18.4-1)
    [2012-07-18 18:27] installed flex (2.5.35-5)
    [2012-07-18 18:27] installed mpfr (3.1.1-1)
    [2012-07-18 18:27] installed libmpc (0.9-2)
    [2012-07-18 18:27] installed isl (0.10-1)
    [2012-07-18 18:27] installed cloog (0.17.0-2)
    [2012-07-18 18:27] installed ppl (1.0-1)
    [2012-07-18 18:27] installed gcc (4.7.1-4)
    [2012-07-18 18:27] installed libltdl (2.4.2-6)
    [2012-07-18 18:27] installed libtool (2.4.2-6)
    [2012-07-18 18:27] installed make (3.82-4)
    [2012-07-18 18:27] installed patch (2.6.1-3)
    [2012-07-18 18:27] installed pkg-config (0.27-1)
    [2012-07-18 18:37] Running 'pacman -Syy'
    [2012-07-18 18:37] synchronizing package lists
    [2012-07-18 18:38] Running 'pacman -Syy'
    [2012-07-18 18:38] synchronizing package lists
    [2012-07-18 18:39] Running 'pacman -S sudo'
    [2012-07-18 18:43] Running 'pacman -S sudo'
    [2012-07-18 18:44] Running 'pacman -S sudo'
    [2012-07-18 18:44] installed sudo (1.8.5.p2-1)
    [2012-07-18 18:45] Running 'pacman -S alsa-utils'
    [2012-07-18 18:46] installed alsa-lib (1.0.25-1)
    [2012-07-18 18:46] installed dialog (1.1_20120706-1)
    [2012-07-18 18:46] installed libogg (1.3.0-1)
    [2012-07-18 18:46] installed flac (1.2.1-3)
    [2012-07-18 18:46] installed libvorbis (1.3.3-1)
    [2012-07-18 18:46] installed libsndfile (1.0.25-2)
    [2012-07-18 18:46] installed libsamplerate (0.1.8-1)
    [2012-07-18 18:46] installed alsa-utils (1.0.25-3)
    [2012-07-18 18:46] Running 'pacman -S alsa-plugins'
    [2012-07-18 18:46] installed alsa-plugins (1.0.25-2)
    [2012-07-18 18:48] Running 'pacman -S xorg-server xorg-xinit xorg-server-utils'
    [2012-07-18 18:48] installed xproto (7.0.23-1)
    [2012-07-18 18:48] installed libxdmcp (1.1.1-1)
    [2012-07-18 18:48] installed freetype2 (2.4.10-1)
    [2012-07-18 18:48] installed libfontenc (1.1.1-1)
    [2012-07-18 18:48] installed fontsproto (2.1.2-1)
    [2012-07-18 18:48] installed libxfont (1.4.5-1)
    [2012-07-18 18:48] installed libpciaccess (0.13.1-1)
    [2012-07-18 18:48] installed libdrm (2.4.37-1)
    [2012-07-18 18:48] installed pixman (0.26.2-1)
    [2012-07-18 18:48] installed libxau (1.0.7-1)
    [2012-07-18 18:48] installed xcb-proto (1.7.1-1)
    [2012-07-18 18:48] installed libxcb (1.8.1-1)
    [2012-07-18 18:48] installed kbproto (1.0.6-1)
    [2012-07-18 18:48] installed libx11 (1.5.0-1)
    [2012-07-18 18:48] installed libxkbfile (1.0.8-1)
    [2012-07-18 18:48] installed xorg-xkbcomp (1.2.4-1)
    [2012-07-18 18:48] installed xkeyboard-config (2.6-1)
    [2012-07-18 18:48] installed xorg-setxkbmap (1.3.0-1)
    [2012-07-18 18:48] installed xorg-fonts-encodings (1.0.4-3)
    [2012-07-18 18:48] installed xorg-fonts-alias (1.0.2-2)
    [2012-07-18 18:48] installed xorg-bdftopcf (1.0.3-2)
    [2012-07-18 18:48] installed xorg-mkfontscale (1.1.0-1)
    [2012-07-18 18:48] installed xorg-mkfontdir (1.0.7-1)
    [2012-07-18 18:48] installed xorg-font-util (1.3.0-1)
    [2012-07-18 18:48] installed xorg-font-utils (7.6-3)
    [2012-07-18 18:48] updating font cache... done.
    [2012-07-18 18:48] installed fontconfig (2.8.0-2)
    [2012-07-18 18:49] Updating font cache... done.
    [2012-07-18 18:49] installed xorg-fonts-misc (1.0.1-2)
    [2012-07-18 18:49] installed xorg-server-common (1.12.3-1)
    [2012-07-18 18:49] installed xf86-input-evdev (2.7.0-2)
    [2012-07-18 18:49] installed xorg-server (1.12.3-1)
    [2012-07-18 18:49] installed xextproto (7.2.1-1)
    [2012-07-18 18:49] installed libxext (1.3.1-1)
    [2012-07-18 18:49] installed libice (1.0.8-1)
    [2012-07-18 18:49] installed libsm (1.2.1-1)
    [2012-07-18 18:49] installed libxt (1.1.3-1)
    [2012-07-18 18:49] installed libxmu (1.1.1-1)
    [2012-07-18 18:49] installed xorg-xauth (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xinit (1.3.2-1)
    [2012-07-18 18:49] installed xorg-iceauth (1.0.5-1)
    [2012-07-18 18:49] installed xorg-sessreg (1.0.7-1)
    [2012-07-18 18:49] installed xorg-xcmsdb (1.0.4-1)
    [2012-07-18 18:49] installed renderproto (0.11.1-2)
    [2012-07-18 18:49] installed libxrender (0.9.7-1)
    [2012-07-18 18:49] installed randrproto (1.3.2-2)
    [2012-07-18 18:49] installed libxrandr (1.3.2-2)
    [2012-07-18 18:49] installed xorg-xbacklight (1.1.2-3)
    [2012-07-18 18:49] installed xf86vidmodeproto (2.3.1-2)
    [2012-07-18 18:49] installed libxxf86vm (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xgamma (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xhost (1.0.5-1)
    [2012-07-18 18:49] installed xorg-xrandr (1.3.5-1)
    [2012-07-18 18:49] installed inputproto (2.2-1)
    [2012-07-18 18:49] installed libxi (1.6.1-1)
    [2012-07-18 18:49] installed xineramaproto (1.2.1-2)
    [2012-07-18 18:49] installed libxinerama (1.1.2-1)
    [2012-07-18 18:49] installed xorg-xinput (1.6.0-1)
    [2012-07-18 18:49] installed xorg-xmodmap (1.0.7-1)
    [2012-07-18 18:49] installed mcpp (2.7.2-4)
    [2012-07-18 18:49] installed xorg-xrdb (1.0.9-2)
    [2012-07-18 18:49] installed xorg-xrefresh (1.0.4-3)
    [2012-07-18 18:49] installed xorg-xset (1.2.2-1)
    [2012-07-18 18:49] installed fixesproto (5.0-2)
    [2012-07-18 18:49] installed libxfixes (5.0-2)
    [2012-07-18 18:49] installed libxcursor (1.1.13-1)
    [2012-07-18 18:49] installed xorg-xsetroot (1.1.0-3)
    [2012-07-18 18:49] installed xorg-server-utils (7.6-3)
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils'
    [2012-07-18 18:50] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
    [2012-07-18 18:51] installed videoproto (2.3.1-2)
    [2012-07-18 18:51] installed libxv (1.0.7-1)
    [2012-07-18 18:51] installed libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed nvidia-utils (302.17-1)
    [2012-07-18 18:51] In order to use nvidia module, reboot the system.
    [2012-07-18 18:51] installed nvidia (302.17-3)
    [2012-07-18 18:51] installed lib32-glibc (2.16.0-2)
    [2012-07-18 18:51] installed lib32-libxdmcp (1.1.1-1)
    [2012-07-18 18:51] installed lib32-libxau (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxcb (1.8.1-2)
    [2012-07-18 18:51] installed lib32-libx11 (1.5.0-1)
    [2012-07-18 18:51] installed lib32-libxext (1.3.1-1)
    [2012-07-18 18:51] installed lib32-libxv (1.0.7-1)
    [2012-07-18 18:51] installed lib32-libxvmc (1.0.7-1)
    [2012-07-18 18:51] installed lib32-zlib (1.2.7-1)
    [2012-07-18 18:51] installed lib32-gcc-libs (4.7.1-4.1)
    [2012-07-18 18:51] installed lib32-nvidia-utils (302.17-1)
    [2012-07-18 18:55] Running 'pacman -S xorg-twm xorg-xclock xterm'
    [2012-07-18 18:55] installed xorg-twm (1.0.7-1)
    [2012-07-18 18:55] installed libxpm (3.5.10-1)
    [2012-07-18 18:55] installed libxaw (1.0.11-1)
    [2012-07-18 18:55] installed libxft (2.3.1-1)
    [2012-07-18 18:55] installed xorg-xclock (1.0.6-1)
    [2012-07-18 18:55] installed xorg-luit (1.1.1-1)
    [2012-07-18 18:55] installed xbitmaps (1.1.1-2)
    [2012-07-18 18:55] installed xterm (281-1)
    [2012-07-18 18:55] Running 'pacman -S dbus'
    [2012-07-18 18:55] installed dbus (1.6.2-1)
    [2012-07-18 18:56] Running 'pacman -S ttf-dejavu'
    [2012-07-18 18:56] installed ttf-dejavu (2.33-3)
    [2012-07-18 18:57] Running 'pacman -S awesome'
    [2012-07-18 18:57] installed libpng (1.5.11-1)
    [2012-07-18 18:57] installed cairo (1.12.2-2)
    [2012-07-18 18:57] installed libjpeg-turbo (1.2.1-1)
    [2012-07-18 18:57] installed libtiff (4.0.2-1)
    [2012-07-18 18:57] installed giflib (4.1.6-5)
    [2012-07-18 18:57] installed libid3tag (0.15.1b-7)
    [2012-07-18 18:57] installed imlib2 (1.4.5-2)
    [2012-07-18 18:57] installed libev (4.11-1)
    [2012-07-18 18:57] installed libxdg-basedir (1.2.0-1)
    [2012-07-18 18:57] installed lua (5.1.5-2)
    [2012-07-18 18:57] installed libdatrie (0.2.5-1)
    [2012-07-18 18:57] installed libthai (0.1.17-1)
    [2012-07-18 18:57] installed pango (1.30.1-1)
    [2012-07-18 18:57] installed xcb-util (0.3.9-1)
    [2012-07-18 18:57] installed startup-notification (0.12-3)
    [2012-07-18 18:57] installed xcb-util-image (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-keysyms (0.3.9-1)
    [2012-07-18 18:57] installed xcb-util-wm (0.3.9-1)
    [2012-07-18 18:57] installed xorg-xmessage (1.0.3-2)
    [2012-07-18 18:57] installed awesome (3.4.13-1)
    [2012-07-18 18:58] Running 'pacman -S rlwrap feh'
    [2012-07-18 18:58] installed rlwrap (0.37-2)
    [2012-07-18 18:58] installed giblib (1.2.4-5)
    [2012-07-18 18:58] installed libexif (0.6.20-2)
    [2012-07-18 18:58] installed feh (2.5-1)
    [2012-07-18 18:59] Running 'pacman -S packer'
    [2012-07-18 18:59] Running 'pacman -S lightdm'
    [2012-07-18 19:01] Running 'pacman -S fakeroot'
    [2012-07-18 19:01] upgraded fakeroot (1.18.4-1 -> 1.18.4-1)
    [2012-07-18 19:08] Running 'pacman -S git'
    [2012-07-18 19:08] installed perl-error (0.17018-1)
    [2012-07-18 19:08] installed git (1.7.11.2-1)
    [2012-07-18 19:08] Running 'pacman -S jshon'
    [2012-07-18 19:08] installed jansson (2.3-1)
    [2012-07-18 19:08] installed jshon (20111222-1)
    [2012-07-18 19:08] Running 'pacman -U packer-20120718-1-any.pkg.tar.xz'
    [2012-07-18 19:08] installed packer (20120718-1)
    [2012-07-18 19:10] Running 'pacman --noconfirm --asdeps -S -- accountsservice dbus-glib gobject-introspection intltool itstool libxklavier'
    [2012-07-18 19:10] installed polkit (0.105-1)
    [2012-07-18 19:10] installed accountsservice (0.6.22-1)
    [2012-07-18 19:10] installed dbus-glib (0.100-1)
    [2012-07-18 19:10] installed sqlite (3.7.13-1)
    [2012-07-18 19:10] installed python2 (2.7.3-2)
    [2012-07-18 19:10] installed gobject-introspection (1.32.1-2)
    [2012-07-18 19:10] installed perl-xml-parser (2.41-3)
    [2012-07-18 19:10] installed intltool (0.50.2-1)
    [2012-07-18 19:10] installed libxml2 (2.7.8-2)
    [2012-07-18 19:10] installed itstool (1.1.2-1)
    [2012-07-18 19:10] installed iso-codes (3.34-1)
    [2012-07-18 19:10] installed libxklavier (5.2.1-2)
    [2012-07-18 19:13] Running 'pacman -U lightdm-1.3.1-4-x86_64.pkg.tar.xz'
    [2012-07-18 19:14] You need to install lightdm-gtk-greeter to run the default and most stable greeter
    [2012-07-18 19:14] installed lightdm (1.3.1-4)
    [2012-07-18 19:14] Running 'pacman --noconfirm --asdeps -S -- archlinux-wallpaper bzr gnome-common gnome-doc-utils gtk-doc gtk-engines libwebkit vala'
    [2012-07-18 19:15] ==> Wallpapers have been installed to /usr/share/archlinux/wallpaper
    [2012-07-18 19:15] installed archlinux-wallpaper (1.4-1)
    [2012-07-18 19:15] installed bzr (2.5.1-1)
    [2012-07-18 19:15] installed gnome-common (3.4.0.1-2)
    [2012-07-18 19:15] installed libxslt (1.1.26-3)
    [2012-07-18 19:15] installed docbook-xml (4.5-5)
    [2012-07-18 19:15] installed rarian (0.8.1-2)
    [2012-07-18 19:15] installed gnome-doc-utils (0.20.10-1)
    [2012-07-18 19:15] installed docbook-xsl (1.77.1-2)
    [2012-07-18 19:15] installed gtk-doc (1.18-1)
    [2012-07-18 19:15] installed atk (2.4.0-1)
    [2012-07-18 19:15] installed compositeproto (0.4.2-2)
    [2012-07-18 19:15] installed libxcomposite (0.4.3-2)
    [2012-07-18 19:15] installed damageproto (1.2.1-2)
    [2012-07-18 19:15] installed libxdamage (1.1.3-2)
    [2012-07-18 19:15] installed shared-mime-info (1.0-1)
    [2012-07-18 19:15] installed libtasn1 (2.13-1)
    [2012-07-18 19:15] installed nettle (2.5-1)
    [2012-07-18 19:15] installed p11-kit (0.12-1)
    [2012-07-18 19:15] installed gnutls (3.0.21-1)
    [2012-07-18 19:15] installed libdaemon (0.14-2)
    [2012-07-18 19:15] ==> The following daemons may be added to DAEMONS in /etc/rc.conf:
    [2012-07-18 19:15] ==> avahi-daemon: the mdns responder, you probably want this.
    [2012-07-18 19:15] ==> dbus needs to be running when you start it.
    [2012-07-18 19:15] ==> avahi-dnsconfd: daemon used for peer-to-peer automatic dns
    [2012-07-18 19:15] ==> configuration on dhcp-less networks.
    [2012-07-18 19:15]
    [2012-07-18 19:15] ==> To use some of the client applications you will have to install python.
    [2012-07-18 19:15] ==> In addition, pygtk is required for the graphical ones and
    [2012-07-18 19:15] ==> twisted for avahi-bookmarks.
    [2012-07-18 19:15] installed avahi (0.6.31-3)
    [2012-07-18 19:15] installed libcups (1.5.3-5)
    [2012-07-18 19:15] installed gdk-pixbuf2 (2.26.1-1)
    [2012-07-18 19:15] installed gtk-update-icon-cache (2.24.10-3)
    [2012-07-18 19:15] installed gtk2 (2.24.10-3)
    [2012-07-18 19:15] installed gtk-engines (2.21.0-1)
    [2012-07-18 19:15] installed icu (49.1.2-1)
    [2012-07-18 19:15] installed gstreamer0.10 (0.10.36-1)
    [2012-07-18 19:15] installed orc (0.4.16-1)
    [2012-07-18 19:15] installed gstreamer0.10-base (0.10.36-1)
    [2012-07-18 19:15] installed libproxy (0.4.7-2)
    [2012-07-18 19:15] installed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-18 19:15] installed glib-networking (2.32.3-1)
    [2012-07-18 19:15] installed libsoup (2.38.1-1)
    [2012-07-18 19:15] ==> aspell comes with no default dictionary
    [2012-07-18 19:15] installed aspell (0.60.6.1-1)
    [2012-07-18 19:15] installed hunspell (1.3.2-1)
    [2012-07-18 19:15] installed hspell (1.1-2)
    [2012-07-18 19:15] installed enchant (1.6.0-4)
    [2012-07-18 19:15] installed geoclue (0.12.0-5)
    [2012-07-18 19:15] installed libwebkit (1.8.1-1)
    [2012-07-18 19:15] installed vala (0.16.1-1)
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-bzr-13-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] Running 'pacman -U lightdm-webkit-greeter-0.1.2-3-x86_64.pkg.tar.xz'
    [2012-07-18 19:16] installed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:47] Running 'pacman -R lightdm'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkite enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:48] Running 'pacman -R lightdm-webkit-greeter lightdm accountsservice libwebkit enchant geoclue dbus-glib libxklavier'
    [2012-07-18 19:49] removed lightdm-webkit-greeter (0.1.2-3)
    [2012-07-18 19:49] removed libwebkit (1.8.1-1)
    [2012-07-18 19:49] removed geoclue (0.12.0-5)
    [2012-07-18 19:49] removed enchant (1.6.0-4)
    [2012-07-18 19:49] userdel: user lightdm is currently used by process 657
    [2012-07-18 19:49] groupdel: cannot remove the primary group of user 'lightdm'
    [2012-07-18 19:49] removed lightdm (1.3.1-4)
    [2012-07-18 19:49] removed libxklavier (5.2.1-2)
    [2012-07-18 19:49] removed dbus-glib (0.100-1)
    [2012-07-18 19:49] removed accountsservice (0.6.22-1)
    [2012-07-18 19:50] Running 'pacman -S chromium'
    [2012-07-18 19:50] installed dbus-glib (0.100-1)
    [2012-07-18 19:50] installed nspr (4.9.1-1)
    [2012-07-18 19:50] installed nss (3.13.5-1)
    [2012-07-18 19:50] installed xdg-utils (1.1.0-2.20120520)
    [2012-07-18 19:50] installed libevent (2.0.19-1)
    [2012-07-18 19:50] installed scrnsaverproto (1.2.2-1)
    [2012-07-18 19:50] installed libxss (1.2.2-1)
    [2012-07-18 19:50] installed desktop-file-utils (0.20-1)
    [2012-07-18 19:50] installed hicolor-icon-theme (0.12-2)
    [2012-07-18 19:50] installed chromium (20.0.1132.57-1)
    [2012-07-18 19:50] Running 'pacman -Sy abs'
    [2012-07-18 19:50] synchronizing package lists
    [2012-07-18 19:51] installed rsync (3.0.9-3)
    [2012-07-18 19:51] installed abs (2.4.3-2)
    [2012-07-18 19:52] Running 'pacman -S openjdk6 perl git gnupg flex bison gperf zip unzip wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline'
    [2012-07-18 19:53] installed ca-certificates-java (20120608-1)
    [2012-07-18 19:53] installed recordproto (1.14.2-1)
    [2012-07-18 19:53] installed libxtst (1.2.1-1)
    [2012-07-18 19:53] upgraded zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 19:53] upgraded libpng (1.5.11-1 -> 1.5.11-1)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/NetLock_Arany_=Class_Gold=_F?tan?s?tv?ny.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/AC_Ra?z_Certic?mara_S.A..pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/Certinomis_-_Autorit?_Racine.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/T?B?TAK_UEKAE_K?k_Sertifika_Hizmet_Sa?lay?c?s?_-_S?r?m_3.pem (No such file or directory)
    [2012-07-18 19:53] Warning: there was a problem reading the certificate file /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem. Message:
    [2012-07-18 19:53] /etc/ssl/certs/EBG_Elektronik_Sertifika_Hizmet_Sa?lay?c?s?.pem (No such file or directory)
    [2012-07-18 19:53] done.
    [2012-07-18 19:53] when you use a non-reparenting window manager
    [2012-07-18 19:53] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-07-18 19:53] /etc/profile.d/openjdk6.sh
    [2012-07-18 19:53] installed openjdk6 (6.b24_1.11.3-1)
    [2012-07-18 19:53] upgraded perl (5.16.0-2 -> 5.16.0-2)
    [2012-07-18 19:53] upgraded git (1.7.11.2-1 -> 1.7.11.2-1)
    [2012-07-18 19:53] upgraded ncurses (5.9-3 -> 5.9-3)
    [2012-07-18 19:53] upgraded readline (6.2.003-2 -> 6.2.003-2)
    [2012-07-18 19:53] upgraded gnupg (2.0.19-2 -> 2.0.19-2)
    [2012-07-18 19:53] upgraded flex (2.5.35-5 -> 2.5.35-5)
    [2012-07-18 19:53] upgraded bison (2.5.1-1 -> 2.5.1-1)
    [2012-07-18 19:53] installed gperf (3.0.4-4)
    [2012-07-18 19:53] installed zip (3.0-3)
    [2012-07-18 19:53] installed unzip (6.0-6)
    [2012-07-18 19:53] installed wxgtk (2.8.12.1-3)
    [2012-07-18 19:53] installed lzo2 (2.06-1)
    [2012-07-18 19:53] installed squashfs-tools (4.2-2)
    [2012-07-18 19:53] upgraded libusbx (1.0.12-2 -> 1.0.12-2)
    [2012-07-18 19:53] installed libusb-compat (0.1.4-2)
    [2012-07-18 19:53] Running 'pacman -S -- esdl schedtool'
    [2012-07-18 19:54] installed erlang (R15B01-1)
    [2012-07-18 19:54] installed sdl (1.2.15-1)
    [2012-07-18 19:54] installed dri2proto (2.6-1)
    [2012-07-18 19:54] installed glproto (1.4.15-1)
    [2012-07-18 19:54] installed mesa (8.0.4-1)
    [2012-07-18 19:54] installed esdl (2:1.2-1)
    [2012-07-18 19:54] installed schedtool (1.3.0-2)
    [2012-07-18 19:55] Running 'pacman -U pngcrush-1.7.31-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed pngcrush (1.7.31-1)
    [2012-07-18 19:55] Running 'pacman -U repo-1.17-1-x86_64.pkg.tar.xz'
    [2012-07-18 19:55] installed repo (1.17-1)
    [2012-07-18 19:59] Running 'pacman -S terminator'
    [2012-07-18 19:59] installed vte-common (0.32.2-1)
    [2012-07-18 19:59] installed vte (0.28.2-3)
    [2012-07-18 19:59] installed libglade (2.6.4-3)
    [2012-07-18 19:59] installed python2-cairo (1.10.0-1)
    [2012-07-18 19:59] installed pygobject2-devel (2.28.6-6)
    [2012-07-18 19:59] installed python2-gobject2 (2.28.6-6)
    [2012-07-18 19:59] installed pygtk (2.24.0-3)
    [2012-07-18 19:59] installed terminator (0.96-1)
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-libusb-compat lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:00] Running 'pacman -Sy gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-07-18 20:00] synchronizing package lists
    [2012-07-18 20:01] removed gcc-libs (4.7.1-4)
    [2012-07-18 20:01] removed binutils (2.22-9)
    [2012-07-18 20:01] removed gcc (4.7.1-4)
    [2012-07-18 20:01] removed libtool (2.4.2-6)
    [2012-07-18 20:01] installed gcc-libs-multilib (4.7.1-4.1)
    [2012-07-18 20:01] installed binutils-multilib (2.22-8)
    [2012-07-18 20:01] installed gcc-multilib (4.7.1-4.1)
    [2012-07-18 20:01] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-07-18 20:01] installed lib32-libltdl (2.4.2-6)
    [2012-07-18 20:01] installed libtool-multilib (2.4.2-6)
    [2012-07-18 20:01] installed lib32-ncurses (5.9-1)
    [2012-07-18 20:01] installed lib32-readline (6.2.003-1)
    [2012-07-18 20:01] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-07-18 20:07] Running 'pacman -S ssh'
    [2012-07-18 20:10] Running 'pacman -S ssh-keygen'
    [2012-07-18 20:10] Running 'pacman -S openssh'
    [2012-07-18 20:10] installed libedit (20120311_3.0-1)
    [2012-07-18 20:10] installed dnssec-anchors (20120422-1)
    [2012-07-18 20:10] installed ldns (1.6.13-1)
    [2012-07-18 20:10] installed openssh (6.0p1-3)
    [2012-07-18 20:11] Running 'pacman -S pbcopy'
    [2012-07-18 20:11] Running 'pacman -S copy'
    [2012-07-18 20:13] Running 'pacman -S gedit'
    [2012-07-18 20:13] installed lcms2 (2.3-2)
    [2012-07-18 20:13] installed libgusb (0.1.3-1)
    [2012-07-18 20:13] installed gd (2.0.36RC1-5)
    [2012-07-18 20:13] installed libgphoto2 (2.4.14-1)
    [2012-07-18 20:13] installed libieee1284 (0.2.11-4)
    [2012-07-18 20:13] installed v4l-utils (0.8.8-1)
    [2012-07-18 20:13] installed net-snmp (5.7.1-3)
    [2012-07-18 20:13] NOTE
    [2012-07-18 20:13] ----
    [2012-07-18 20:13] Add your user to group 'scanner' to use scanner devices.
    [2012-07-18 20:13] installed sane (1.0.22-9)
    [2012-07-18 20:13] installed shared-color-profiles (0.1.5-1)
    [2012-07-18 20:13] installed colord (0.1.21-2)
    [2012-07-18 20:13] installed gtk3 (3.4.3-1)
    [2012-07-18 20:13] installed gtksourceview3 (3.4.2-1)
    [2012-07-18 20:13] installed libpeas (1.4.0-2)
    [2012-07-18 20:13] installed enchant (1.6.0-4)
    [2012-07-18 20:13] installed pygobject-devel (3.2.2-1)
    [2012-07-18 20:13] installed python2-gobject (3.2.2-1)
    [2012-07-18 20:13] installed dconf (0.12.1-2)
    [2012-07-18 20:13] installed gedit (3.4.2-1)
    [2012-07-18 20:15] Running 'pacman -S python'
    [2012-07-18 20:16] installed python (3.2.3-3)
    [2012-07-18 20:26] Running 'pacman -S xclip'
    [2012-07-18 20:26] installed xclip (0.12-3)
    [2012-07-18 20:37] Running 'pacman --noconfirm --asdeps -S -- lib32-alsa-lib lib32-libstdc++5 lib32-openal lib32-sdl swt'
    [2012-07-18 20:37] installed lib32-alsa-lib (1.0.25-1)
    [2012-07-18 20:37] installed lib32-libstdc++5 (3.3.6-6)
    [2012-07-18 20:37] installed openal (1.14-1)
    [2012-07-18 20:37] installed lib32-openal (1.14-1)
    [2012-07-18 20:37] installed lib32-libxrender (0.9.7-1)
    [2012-07-18 20:37] installed lib32-sdl (1.2.15-2)
    [2012-07-18 20:37] installed swt (3.7.2-1)
    [2012-07-18 20:45] Running 'pacman --asdeps -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:50] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:50] The android group has been removed, install android packages as root.
    [2012-07-18 20:50] installed android-sdk (r20-2)
    [2012-07-18 20:51] Running 'pacman -U android-sdk-r20-2-x86_64.pkg.tar.xz'
    [2012-07-18 20:54] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-07-18 20:54] The android group has been removed, install android packages as root.
    [2012-07-18 20:54] upgraded android-sdk (r20-2 -> r20-2)
    [2012-07-18 20:59] Running 'pacman -U android-sdk-platform-tools-r12-1-any.pkg.tar.xz'
    [2012-07-18 20:59] installed android-sdk-platform-tools (r12-1)
    [2012-07-18 21:10] Running 'pacman -S perl-switch'
    [2012-07-18 21:10] installed perl-switch (2.16-1)
    [2012-07-21 03:29] Running 'pacman -S flashplugin'
    [2012-07-21 03:29] relogin or source /etc/profile.d/mozilla-common.sh
    [2012-07-21 03:29] installed mozilla-common (1.4-3)
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] >> If you have an NVIDIA card that supports libvdpau or Broadcom Crystal HD chips,
    [2012-07-21 03:29] >> uncomment EnableLinuxHWVideoDecode=1 from /etc/adobe/mms.cfg.
    [2012-07-21 03:29] >> If you run into problems, please contact nVidia or Broadcom along with your system config info / driver version.
    [2012-07-21 03:29] >>
    [2012-07-21 03:29] installed flashplugin (11.2.202.236-1)
    [2012-07-21 03:32] Running 'pacman -S libvdpau'
    [2012-07-21 03:32] installed libvdpau (0.4.1-2)
    [2012-07-21 14:53] Running 'pacman -S gedit-common'
    [2012-07-21 14:55] Running 'pacman -S gtk-theme-switch2'
    [2012-07-21 14:56] installed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:00] Running 'pacman -S gtk-icons'
    [2012-07-21 15:04] Running 'pacman -R gtk-theme-switch2 gedit dconf desktop-file-utils enchant gsettings-desktop-schemas gtksourceview3 iso-codes libpeas libsm python2-gobject'
    [2012-07-21 15:06] Running 'pacman -R gtk-theme-switch2 gedit dconf enchant gtksourceview3 iso-codes libpeas python2-gobject'
    [2012-07-21 15:06] removed gedit (3.4.2-1)
    [2012-07-21 15:06] removed python2-gobject (3.2.2-1)
    [2012-07-21 15:06] removed libpeas (1.4.0-2)
    [2012-07-21 15:06] removed iso-codes (3.34-1)
    [2012-07-21 15:06] removed gtksourceview3 (3.4.2-1)
    [2012-07-21 15:06] removed enchant (1.6.0-4)
    [2012-07-21 15:06] removed dconf (0.12.1-2)
    [2012-07-21 15:06] removed gtk-theme-switch2 (2.1.0-2)
    [2012-07-21 15:06] Running 'pacman -R glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] Running 'pacman -R libsoup glib-networking gsettings-desktop-schemas'
    [2012-07-21 15:06] removed libsoup (2.38.1-1)
    [2012-07-21 15:06] removed glib-networking (2.32.3-1)
    [2012-07-21 15:06] removed gsettings-desktop-schemas (3.4.2-1)
    [2012-07-21 15:07] Running 'pacman -R wxgtk'
    [2012-07-21 15:07] removed wxgtk (2.8.12.1-3)
    [2012-07-21 15:07] Running 'pacman -R libxt libsm'
    [2012-07-21 15:11] Running 'pacman -S ranger'
    [2012-07-21 15:11] installed ranger (1.5.4-1)
    [2012-07-21 15:32] Running 'pacman -S irssi'
    [2012-07-21 15:32] installed irssi (0.8.15-6)
    [2012-07-24 20:20] Running 'pacman -U sublime-text-2.0.1-1-x86_64.pkg.tar.xz'
    [2012-07-24 20:20] installed sublime-text (2.0.1-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-1.4.11-1-x86_64.pkg.tar.xz'
    [2012-07-24 23:41] installed dropbox (1.4.11-1)
    [2012-07-24 23:41] Running 'pacman -U dropbox-daemon-0.8-8-any.pkg.tar.xz'
    [2012-07-24 23:41] >> Configure the Dropbox daemon script by editing /etc/conf.d/dropboxd.conf
    [2012-07-24 23:41] installed dropbox-daemon (0.8-8)
    [2012-07-24 23:48] Running 'pacman -U dropbox-cli-1-12-x86_64.pkg.tar.xz'
    [2012-07-24 23:48] installed dropbox-cli (1-12)
    [2012-07-24 23:49] Running 'pacman -S nautilus'
    [2012-07-24 23:56] Running 'pacman -S ranger'
    [2012-07-24 23:57] upgraded ranger (1.5.4-1 -> 1.5.4-1)
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:23] Running 'pacman -Sy'
    [2012-07-25 00:23] synchronizing package lists
    [2012-07-25 00:24] Running 'pacman --noconfirm --asdeps -S -- gconf qt qtwebkit'
    [2012-07-25 00:25] installed gconf (3.2.5-2)
    [2012-07-25 00:25] installed libmng (1.0.10-4)
    [2012-07-25 00:25] installed qt (4.8.2-3)
    [2012-07-25 00:25] installed qtwebkit (2.2.2-1)
    [2012-07-25 00:27] Running 'pacman --asdeps -U openssl098-0.9.8.x-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:27] installed openssl098 (0.9.8.x-1)
    [2012-07-25 00:28] Running 'pacman --asdeps -U libpng12-1.2.49-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:28] installed libpng12 (1.2.49-1)
    [2012-07-25 00:30] Running 'pacman -U spotify-0.8.4.103-1-x86_64.pkg.tar.xz'
    [2012-07-25 00:31] installed spotify (0.8.4.103-1)
    [2012-07-29 16:57] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 16:58] Running 'pacman -Syy'
    [2012-07-29 16:58] synchronizing package lists
    [2012-07-29 17:00] Running 'pacman --noconfirm --asdeps -S -- ffmpeg libmediainfo mencoder mplayer'
    [2012-07-29 17:00] installed gsm (1.0.13-7)
    [2012-07-29 17:00] installed lame (3.99.5-1)
    [2012-07-29 17:00] installed libasyncns (0.8-4)
    [2012-07-29 17:00] installed json-c (0.9-1)
    [2012-07-29 17:00] installed libpulse (2.1-1)
    [2012-07-29 17:00] installed libtheora (1.1.1-2)
    [2012-07-29 17:00] installed libglapi (8.0.4-2)
    [2012-07-29 17:00] installed khrplatform-devel (8.0.4-2)
    [2012-07-29 17:00] installed libegl (8.0.4-2)
    [2012-07-29 17:00] installed libva (1.1.0-1)
    [2012-07-29 17:00] installed libvpx (1.1.0-1)
    [2012-07-29 17:00] installed opencore-amr (0.1.3-1)
    [2012-07-29 17:00] installed openjpeg (1.5.0-1)
    [2012-07-29 17:00] installed rtmpdump (2.4-1)
    [2012-07-29 17:00] installed schroedinger (1.0.11-1)
    [2012-07-29 17:00] installed speex (1.2rc1-2)
    [2012-07-29 17:00] installed x264 (20120705-1)
    [2012-07-29 17:00] installed xvidcore (1.3.2-1)
    [2012-07-29 17:00] installed ffmpeg (1:0.11.1-1)
    [2012-07-29 17:00] installed libmms (0.6.2-1)
    [2012-07-29 17:00] installed libzen (0.4.26-1)
    [2012-07-29 17:00] installed libmediainfo (0.7.58-1)
    [2012-07-29 17:00] installed recode (3.6-7)
    [2012-07-29 17:00] installed enca (1.13-2)
    [2012-07-29 17:00] installed a52dec (0.7.4-6)
    [2012-07-29 17:00] installed libdca (0.0.5-3)
    [2012-07-29 17:00] installed talloc (2.0.7-1)
    [2012-07-29 17:00] installed libwbclient (3.6.6-1)
    [2012-07-29 17:00] installed libcap-ng (0.6.6-1)
    [2012-07-29 17:00] installed cifs-utils (5.5-1)
    [2012-07-29 17:00] installed tdb (1.2.9-2)
    [2012-07-29 17:00] installed smbclient (3.6.6-1)
    [2012-07-29 17:00] installed libmad (0.15.1b-6)
    [2012-07-29 17:00] installed fribidi (0.19.2-2)
    [2012-07-29 17:00] installed libmp4v2 (2.0.0-2)
    [2012-07-29 17:00] installed faac (1.28-4)
    [2012-07-29 17:00] installed faad2 (2.7-3)
    [2012-07-29 17:00] installed mpg123 (1.14.4-1)
    [2012-07-29 17:00] installed libass (0.10.0-3)
    [2012-07-29 17:00] installed libbluray (0.2.2-1)
    [2012-07-29 17:00] installed libcddb (1.3.2-3)
    [2012-07-29 17:00] installed libcdio (0.83-1)
    [2012-07-29 17:00] installed mencoder (35014-1)
    [2012-07-29 17:00] installed libftdi (0.20-1)
    [2012-07-29 17:00] installed libirman (0.4.5-3)
    [2012-07-29 17:00] installed lirc-utils (1:0.9.0-22)
    [2012-07-29 17:00] installed gpm (1.20.6-10)
    [2012-07-29 17:00] installed aalib (1.4rc5-9)
    [2012-07-29 17:00] installed jack (0.121.3-6)
    [2012-07-29 17:00] installed libcaca (0.99.beta18-1)
    [2012-07-29 17:00] installed xf86dgaproto (2.1-2)
    [2012-07-29 17:00] installed libxxf86dga (1.1.3-1)
    [2012-07-29 17:00] installed mplayer (35014-1)
    [2012-07-29 17:00] Running 'pacman -U pms-1.60.0-1-x86_64.pkg.tar.xz'
    [2012-07-29 17:00] installed pms (1.60.0-1)
    [2012-07-29 17:20] Running 'pacman -S netstat'
    [2012-07-29 17:31] Running 'pacman -S ntfs-3g'
    [2012-07-29 17:31] installed fuse (2.9.0-1)
    [2012-07-29 17:31] installed ntfs-3g (2012.1.15-3)
    [2012-07-29 17:45] Running 'pacman -S tsmuxer'
    [2012-07-29 17:45] Running 'pacman -S tsMuxeR'
    [2012-07-29 17:45] Running 'pacman --noconfirm --asdeps -S -- lib32-freetype2'
    [2012-07-29 17:45] installed lib32-bzip2 (1.0.6-1)
    [2012-07-29 17:45] installed lib32-freetype2 (2.4.10-1)
    [2012-07-29 17:48] Running 'pacman -U tsmuxer-1.10.6-12-x86_64.pkg.tar.xz'
    [2012-07-29 17:48] The tsmuxer package is licensed software.
    [2012-07-29 17:48] You MUST read and agree to the license stored in
    [2012-07-29 17:48] /opt/tsmuxer/LICENSE before using it.
    [2012-07-29 17:48] installed tsmuxer (1.10.6-12)
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java7'
    [2012-07-29 18:23] Running 'pacman -S icedtea-web-java6'
    [2012-07-29 18:24] Running 'pacman -S openjre'
    [2012-07-29 18:25] Running 'pacman -S jre'
    [2012-07-29 18:25] Running 'pacman -S icetea-plugin'
    [2012-07-29 18:27] Running 'pacman -S icedtea-web'
    [2012-07-29 18:27] installed icedtea-web (1.2-1)
    [2012-07-29 18:35] Running 'pacman -S ccache'
    [2012-07-29 18:35] installed ccache (3.1.7-1)
    [2012-07-29 18:50] Running 'pacman -S rtorrent'
    [2012-07-29 18:50] installed libsigc++ (2.2.10-2)
    [2012-07-29 18:50] installed libtorrent (0.13.2-2)
    [2012-07-29 18:50] installed xmlrpc-c (1:1.31.02-2)
    [2012-07-29 18:50] installed rtorrent (0.9.2-2)
    [2012-07-29 18:52] Running 'pacman -S rutorrent'
    [2012-07-29 18:52] Running 'pacman --noconfirm --asdeps -S -- php'
    [2012-07-29 18:52] installed php (5.4.5-1)
    [2012-07-29 18:52] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 18:53] installed rutorrent (3.4-2)
    [2012-07-29 18:53] Running 'pacman -R rtorrent'
    [2012-07-29 18:53] removed rtorrent (0.9.2-2)
    [2012-07-29 18:53] Running 'pacman -S rtorrent-svn'
    [2012-07-29 18:54] Running 'pacman -S rtorrent'
    [2012-07-29 18:54] installed rtorrent (0.9.2-2)
    [2012-07-29 18:54] Running 'pacman -S apache php-apache php-cgi mod-scgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl rutorrent-plugins php-geoip screen'
    [2012-07-29 18:55] Running 'pacman -S apache php-apache php-cgi php-xsl php-geoip screen'
    [2012-07-29 18:55] installed apr (1.4.6-1)
    [2012-07-29 18:55] installed unixodbc (2.3.1-1)
    [2012-07-29 18:55] installed apr-util (1.4.1-1)
    [2012-07-29 18:55] installed apache (2.2.22-4)
    [2012-07-29 18:55] installed php-apache (5.4.5-1)
    [2012-07-29 18:55] installed php-cgi (5.4.5-1)
    [2012-07-29 18:55] installed php-xsl (5.4.5-1)
    [2012-07-29 18:55] installed geoip-database (20120706-1)
    [2012-07-29 18:55] installed geoip (1.4.8-2)
    [2012-07-29 18:55] installed php-geoip (1.0.8-2)
    [2012-07-29 18:55] installed screen (4.0.3-13)
    [2012-07-29 19:03] Running 'pacman -U mod_scgi-1.14-1-x86_64.pkg.tar.xz'
    [2012-07-29 19:03] installed mod_scgi (1.14-1)
    [2012-07-29 19:03] Running 'pacman -U rutorrent-plugins-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:03] installed rutorrent-plugins (3.4-2)
    [2012-07-29 19:04] Running 'pacman -U rutorrent-3.4-2-any.pkg.tar.xz'
    [2012-07-29 19:04] upgraded rutorrent (3.4-2 -> 3.4-2)
    [2012-07-29 19:46] Running 'pacman -S unrar unzip'
    [2012-07-29 19:46] installed unrar (4.2.4-1)
    [2012-07-29 19:46] upgraded unzip (6.0-6 -> 6.0-6)
    [2012-07-29 20:00] Running 'pacman -S php-apache mysql'
    [2012-07-29 20:02] upgraded php-apache (5.4.5-1 -> 5.4.5-1)
    [2012-07-29 20:02] installed libmysqlclient (5.5.25.a-1)
    [2012-07-29 20:02] installed mysql-clients (5.5.25.a-1)
    [2012-07-29 20:02] Installing MySQL system tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02] Filling help tables...
    [2012-07-29 20:02] OK
    [2012-07-29 20:02]
    [2012-07-29 20:02] To start mysqld at boot time you have to copy
    [2012-07-29 20:02] support-files/mysql.server to the right place for your system
    [2012-07-29 20:02]
    [2012-07-29 20:02] PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
    [2012-07-29 20:02] To do so, start the server, then issue the following commands:
    [2012-07-29 20:02]
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root password 'new-password'
    [2012-07-29 20:02] /usr/bin/mysqladmin -u root -h arch-shauder password 'new-password'
    [2012-07-29 20:02]
    [2012-07-29 20:02] Alternatively you can run:
    [2012-07-29 20:02] /usr/bin/mysql_secure_installation
    [2012-07-29 20:02]
    [2012-07-29 20:02] which will also give you the option of removing the test
    [2012-07-29 20:02] databases and anonymous user created by default. This is
    [2012-07-29 20:02] strongly recommended for production servers.
    [2012-07-29 20:02]
    [2012-07-29 20:02] See the manual for more instructions.
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can start the MySQL daemon with:
    [2012-07-29 20:02] cd /usr ; /usr/bin/mysqld_safe &
    [2012-07-29 20:02]
    [2012-07-29 20:02] You can test the MySQL daemon with mysql-test-run.pl
    [2012-07-29 20:02] cd /usr/mysql-test ; perl mysql-test-run.pl
    [2012-07-29 20:02]
    [2012-07-29 20:02] Please report any problems with the /usr/scripts/mysqlbug script!
    [2012-07-29 20:02]
    [2012-07-29 20:02] installed mysql (5.5.25.a-1)
    [2012-07-29 20:49] Running 'pacman -Syyu'
    [2012-07-29 20:49] synchronizing package lists
    [2012-07-29 20:50] starting full system upgrade
    [2012-07-29 20:52] upgraded readline (6.2.003-2 -> 6.2.004-1)
    [2012-07-29 20:52] upgraded bash (4.2.036-1 -> 4.2.037-1)
    [2012-07-29 20:52] upgraded bison (2.5.1-1 -> 2.6-1)
    [2012-07-29 20:52] upgraded lib32-gcc-libs (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gcc-libs-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded gnutls (3.0.21-1 -> 3.0.21-2)
    [2012-07-29 20:52] upgraded libpng (1.5.11-1 -> 1.5.12-1)
    [2012-07-29 20:52] upgraded libcups (1.5.3-5 -> 1.5.4-1)
    [2012-07-29 20:52] upgraded gtk-update-icon-cache (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded gtk2 (2.24.10-3 -> 2.24.11-2)
    [2012-07-29 20:52] upgraded chromium (20.0.1132.57-1 -> 20.0.1132.57-2)
    [2012-07-29 20:52] warning: /etc/protocols installed as /etc/protocols.pacnew
    [2012-07-29 20:52] warning: /etc/services installed as /etc/services.pacnew
    [2012-07-29 20:52] upgraded iana-etc (2.30-2 -> 2.30-3)
    [2012-07-29 20:52] upgraded filesystem (2012.6-4 -> 2012.7-1)
    [2012-07-29 20:52] upgraded libsystemd (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded glib2 (2.32.3-1 -> 2.32.4-1)
    [2012-07-29 20:52] upgraded systemd-tools (186-2 -> 187-2)
    [2012-07-29 20:52] upgraded dbus-core (1.6.2-2 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded dbus (1.6.2-1 -> 1.6.4-1)
    [2012-07-29 20:52] upgraded flex (2.5.35-5 -> 2.5.36-1)
    [2012-07-29 20:52] upgraded gcc-multilib (4.7.1-4.1 -> 4.7.1-5)
    [2012-07-29 20:52] upgraded git (1.7.11.2-1 -> 1.7.11.3-1)
    [2012-07-29 20:52] upgraded glproto (1.4.15-1 -> 1.4.16-1)
    [2012-07-29 20:52] upgraded gtk3 (3.4.3-1 -> 3.4.4-1)
    [2012-07-29 20:52] upgraded icu (49.1.2-1 -> 49.1.2-2)
    [2012-07-29 20:52] warning: /etc/rc.conf installed as /etc/rc.conf.pacnew
    [2012-07-29 20:52] upgraded initscripts (2012.06.3-2 -> 2012.07.5-1)
    [2012-07-29 20:52] upgraded lib32-readline (6.2.003-1 -> 6.2.004-1)
    [2012-07-29 20:52] >>> Updating module dependencies. Please wait ...
    [2012-07-29 20:52] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-07-29 20:52] ==> Building image from preset: 'default'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [autodetect]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] ==> Building image from preset: 'fallback'
    [2012-07-29 20:52] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-07-29 20:52] ==> Starting build: 3.4.6-1-ARCH
    [2012-07-29 20:52] -> Running build hook: [base]
    [2012-07-29 20:52] -> Running build hook: [udev]
    [2012-07-29 20:52] -> Running build hook: [pata]
    [2012-07-29 20:52] -> Running build hook: [scsi]
    [2012-07-29 20:52] -> Running build hook: [sata]
    [2012-07-29 20:52] -> Running build hook: [filesystems]
    [2012-07-29 20:52] -> Running build hook: [usbinput]
    [2012-07-29 20:52] -> Running build hook: [fsck]
    [2012-07-29 20:52] ==> Generating module dependencies
    [2012-07-29 20:52] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-07-29 20:52] ==> Image generation successful
    [2012-07-29 20:52] upgraded linux (3.4.5-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded linux-api-headers (3.4.4-1 -> 3.4.6-1)
    [2012-07-29 20:52] upgraded mesa (8.0.4-1 -> 8.0.4-2)
    [2012-07-29 20:52] upgraded nvidia (302.17-3 -> 302.17-4)
    [2012-07-29 20:52] upgraded tzdata (2012c-1 -> 2012d-1)
    [2012-07-29 20:52] upgraded xf86-input-evdev (2.7.0-2 -> 2.7.1-1)
    [2012-08-03 12:40] Running 'pacman -S filezilla'
    [2012-08-03 12:40] installed wxgtk (2.8.12.1-3)
    [2012-08-03 12:40] installed libidn (1.25-1)
    [2012-08-03 12:40] installed filezilla (3.5.3-1)
    [2012-08-06 13:55] Running 'pacman -R openjdk'
    [2012-08-06 13:55] Running 'pacman -R openjdk6'
    [2012-08-06 13:55] Running 'pacman -R icedtea-web'
    [2012-08-06 13:55] removed icedtea-web (1.2-1)
    [2012-08-06 13:56] Running 'pacman -S jdk'
    [2012-08-06 13:57] Running 'pacman --asdeps -U jre-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 13:58] removed openjdk6 (6.b24_1.11.3-1)
    [2012-08-06 13:58]
    [2012-08-06 13:58] The jre package is licensed software.
    [2012-08-06 13:58] You MUST read and agree to the license stored in
    [2012-08-06 13:58] /usr/share/licenses/jre/LICENSE before using it.
    [2012-08-06 13:58] Please relogin to include jre in your PATH.
    [2012-08-06 13:58]
    [2012-08-06 13:58] installed jre (7.5-2)
    [2012-08-06 14:01] Running 'pacman -U jdk-7.5-2-x86_64.pkg.tar.xz'
    [2012-08-06 14:01]
    [2012-08-06 14:01] The jdk package is licensed software.
    [2012-08-06 14:01] You MUST read and agree to the license stored in
    [2012-08-06 14:01] /usr/share/licenses/jdk/LICENSE before using it.
    [2012-08-06 14:01] Please relogin to include jdk in your PATH.
    [2012-08-06 14:01]
    [2012-08-06 14:01] installed jdk (7.5-2)
    [2012-08-06 14:14] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:15] Running 'pacman -R jdk jre'
    [2012-08-06 14:16] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:17] Running 'pacman -Rdd jdk jre'
    [2012-08-06 14:17] removed jdk (7.5-2)
    [2012-08-06 14:17] removed jre (7.5-2)
    [2012-08-06 14:19] Running 'pacman --asdeps -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:19] The jre package is licensed software.
    [2012-08-06 14:19] You MUST read and agree to the license stored in
    [2012-08-06 14:19] /opt/java/jre/LICENSE before using it.
    [2012-08-06 14:19] Please relogin to include jre in your PATH.
    [2012-08-06 14:19] installed jre6 (6u33-b04)
    [2012-08-06 14:21] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:21] The jdk package is licensed software.
    [2012-08-06 14:21] You MUST read and agree to the license stored in
    [2012-08-06 14:21] /opt/java/LICENSE before using it.
    [2012-08-06 14:21] Please relogin to include jdk in your PATH
    [2012-08-06 14:21] installed jdk6 (6u33-b04)
    [2012-08-06 14:23] Running 'pacman -U jre6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 14:54] upgraded jre6 (6u33-b04 -> 6u33-b04)
    [2012-08-06 17:23] Running 'pacman -S gimp'
    [2012-08-06 17:23] installed lcms (1.19-2)
    [2012-08-06 17:23] Updating font cache... done.
    [2012-08-06 17:23] installed gsfonts (1.0.7pre44-3)
    [2012-08-06 17:23] installed libwmf (0.2.8.4-9)
    [2012-08-06 17:23] installed libcroco (0.6.5-1)
    [2012-08-06 17:23] installed librsvg (2.36.1-1)
    [2012-08-06 17:23] installed babl (0.1.10-1)
    [2012-08-06 17:23] installed gegl (0.2.0-2)
    [2012-08-06 17:23] installed freeglut (2.8.0-1)
    [2012-08-06 17:23] installed jasper (1.900.1-7)
    [2012-08-06 17:23] installed gimp (2.8.0-2)
    [2012-08-06 18:25] Running 'pacman -Sy'
    [2012-08-06 18:25] synchronizing package lists
    [2012-08-06 18:25] Running 'pacman -S yaourt'
    [2012-08-06 18:28] Running 'pacman -Sy'
    [2012-08-06 18:28] synchronizing package lists
    [2012-08-06 18:28] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:29] Running 'pacman -Sy'
    [2012-08-06 18:29] synchronizing package lists
    [2012-08-06 18:29] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 18:32] Running 'pacman --noconfirm --asdeps -S -- yajl'
    [2012-08-06 21:50] Running 'pacman -U jdk6-6u33-b04-x86_64.pkg.tar.xz'
    [2012-08-06 21:51] Running 'pacman -Rdd jdk6 jre6'
    [2012-08-06 21:51] removed jdk6 (6u33-b04)
    [2012-08-06 21:51] removed jre6 (6u33-b04)
    [2012-08-06 21:54] Running 'pacman -U sun-java6-6u32-1-x86_64.pkg.tar.xz'
    [2012-08-06 21:54] The sun-java6 package is licensed software.
    [2012-08-06 21:54] You MUST read and agree to the license stored in
    [2012-08-06 21:54] /opt/sun-java6/LICENSE before using it.
    [2012-08-06 21:54]
    [2012-08-06 21:54] Use '. /opt/sun-java6/envsetup.sh' to setup environment.
    [2012-08-06 21:54] installed sun-java6 (6u32-1)
    [2012-08-06 21:59] Running 'pacman -Syu'
    [2012-08-06 21:59] synchronizing package lists
    [2012-08-06 21:59] starting full system upgrade
    [2012-08-06 22:00] Running 'pacman -Sy'
    [2012-08-06 22:00] synchronizing package lists
    [2012-08-06 22:00] Running 'pacman -S yaourt'
    [2012-08-06 22:00] installed yajl (2.0.4-1)
    [2012-08-06 22:00] installed package-query (1.0.1-1)
    [2012-08-06 22:00] installed yaourt (1.1-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S extra/schedtool community/esdl'
    [2012-08-06 22:00] upgraded schedtool (1.3.0-2 -> 1.3.0-2)
    [2012-08-06 22:00] upgraded esdl (2:1.2-1 -> 2:1.2-1)
    [2012-08-06 22:00] Running 'pacman -S --asdeps --needed extra/jdk7-openjdk'
    [2012-08-06 22:01] installed java-rhino (1.7R3-3)
    [2012-08-06 22:01] installed jre7-openjdk-headless (7.u5_2.2.1-1)
    [2012-08-06 22:01] when you use a non-reparenting window manager
    [2012-08-06 22:01] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2012-08-06 22:01] /etc/profile.d/jre.sh
    [2012-08-06 22:01] installed jre7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:01] installed jdk7-openjdk (7.u5_2.2.1-1)
    [2012-08-06 22:02] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.kJz/android-apktool-1.4.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:02] installed android-apktool (1.4.9-1)
    [2012-08-06 22:04] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ubB/android-sdk-r20.0.1-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:05] You need to source /etc/profile or relogin to add the Android SDK tools to your path.
    [2012-08-06 22:05] The android group has been removed, install android packages as root.
    [2012-08-06 22:05] upgraded android-sdk (r20-2 -> r20.0.1-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.g9s/android-sdk-platform-tools-r14-1-any.pkg.tar.xz'
    [2012-08-06 22:08] upgraded android-sdk-platform-tools (r12-1 -> r14-1)
    [2012-08-06 22:08] Running 'pacman -S --asdeps --needed extra/libmtp'
    [2012-08-06 22:08] installed libmtp (1.1.3-1)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.0Uc/android-udev-1.3-4-any.pkg.tar.xz'
    [2012-08-06 22:08] ===> In order to use adb, you have to be in the 'adbusers' group
    [2012-08-06 22:08] ===> For that, use: gpasswd -a USERNAME adbusers
    [2012-08-06 22:08] installed android-udev (1.3-4)
    [2012-08-06 22:08] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.n8w/fastboot-20110628-2-any.pkg.tar.xz'
    [2012-08-06 22:08] installed fastboot (20110628-2)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.aCT/pngcrush-1.7.35-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:09] upgraded pngcrush (1.7.31-1 -> 1.7.35-1)
    [2012-08-06 22:09] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ZNg/repo-git-20120806-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:10] Running 'pacman -S abs base-devel perl git gnupg flex bison gperf zip unzip sdl wxgtk squashfs-tools ncurses libpng zlib libusb libusb-compat readline alsa-lib openal'
    [2012-08-06 22:11] Running 'pacman -S lib32-gcc-libs lib32-glibc lib32-libx11 lib32-libxau lib32-libxcb lib32-libxdmcp lib32-libxext lib32-libxrender lib32-alsa-lib lib32-libstdc++5 lib32-libxv lib32-ncurses lib32-openal lib32-sdl lib32-zlib swt'
    [2012-08-06 22:11] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:11] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-06 22:11] upgraded lib32-libxdmcp (1.1.1-1 -> 1.1.1-1)
    [2012-08-06 22:11] upgraded lib32-libxau (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-libxcb (1.8.1-2 -> 1.8.1-2)
    [2012-08-06 22:11] upgraded lib32-libx11 (1.5.0-1 -> 1.5.0-1)
    [2012-08-06 22:11] upgraded lib32-libxext (1.3.1-1 -> 1.3.1-1)
    [2012-08-06 22:11] upgraded lib32-libxrender (0.9.7-1 -> 0.9.7-1)
    [2012-08-06 22:11] upgraded lib32-alsa-lib (1.0.25-1 -> 1.0.25-1)
    [2012-08-06 22:11] upgraded lib32-libstdc++5 (3.3.6-6 -> 3.3.6-6)
    [2012-08-06 22:11] upgraded lib32-libxv (1.0.7-1 -> 1.0.7-1)
    [2012-08-06 22:11] upgraded lib32-ncurses (5.9-1 -> 5.9-1)
    [2012-08-06 22:11] upgraded lib32-openal (1.14-1 -> 1.14-1)
    [2012-08-06 22:11] upgraded lib32-sdl (1.2.15-2 -> 1.2.15-2)
    [2012-08-06 22:11] upgraded lib32-zlib (1.2.7-1 -> 1.2.7-1)
    [2012-08-06 22:11] upgraded swt (3.7.2-1 -> 3.7.2-1)
    [2012-08-06 22:11] Running 'pacman -S gcc-multilib gcc-libs-multilib binutils-multilib libtool-multilib lib32-readline lib32-glibc lib32-zlib'
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.u2K/lib32-libusb-1.0.9-1-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb (1.0.9-1)
    [2012-08-06 22:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.ENc/lib32-libusb-compat-0.1.4-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:12] installed lib32-libusb-compat (0.1.4-2)
    [2012-08-06 22:16] Running 'pacman -S ps3mediaserver'
    [2012-08-06 22:17] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.WIi/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:17] upgraded pms (1.60.0-1 -> 1.60.0-2)
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:18] Running 'pacman -Syu'
    [2012-08-06 22:18] synchronizing package lists
    [2012-08-06 22:18] starting full system upgrade
    [2012-08-06 22:20] upgraded bison (2.6-1 -> 2.6.2-1)
    [2012-08-06 22:20] upgraded chromium (20.0.1132.57-2 -> 21.0.1180.57-1)
    [2012-08-06 22:20] upgraded libldap (2.4.31-4 -> 2.4.32-1)
    [2012-08-06 22:20] upgraded krb5 (1.10.2-2 -> 1.10.2-3)
    [2012-08-06 22:20] upgraded cifs-utils (5.5-1 -> 5.6-2)
    [2012-08-06 22:20] upgraded cryptsetup (1.4.3-1 -> 1.5.0-1)
    [2012-08-06 22:20] upgraded curl (7.26.0-1 -> 7.27.0-1)
    [2012-08-06 22:20] upgraded flex (2.5.36-1 -> 2.5.37-1)
    [2012-08-06 22:20] upgraded fuse (2.9.0-1 -> 2.9.1-1)
    [2012-08-06 22:20] upgraded git (1.7.11.3-1 -> 1.7.11.4-1)
    [2012-08-06 22:20] upgraded gnutls (3.0.21-2 -> 3.0.22-1)
    [2012-08-06 22:20] upgraded hwids (20120711-1 -> 20120730-1)
    [2012-08-06 22:20] upgraded nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded lib32-nvidia-utils (302.17-1 -> 304.32-1)
    [2012-08-06 22:20] upgraded libcups (1.5.4-1 -> 1.6.1-2)
    [2012-08-06 22:20] upgraded libmysqlclient (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded libsystemd (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded libthai (0.1.17-1 -> 0.1.18-1)
    [2012-08-06 22:20] upgraded systemd-tools (187-2 -> 187-4)
    [2012-08-06 22:20] upgraded mkinitcpio (0.9.2-2 -> 0.10-1)
    [2012-08-06 22:20] >>> Updating module dependencies. Please wait ...
    [2012-08-06 22:20] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2012-08-06 22:20] ==> Building image from preset: 'default'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [autodetect]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] ==> Building image from preset: 'fallback'
    [2012-08-06 22:20] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2012-08-06 22:20] ==> Starting build: 3.4.7-1-ARCH
    [2012-08-06 22:20] -> Running build hook: [base]
    [2012-08-06 22:20] -> Running build hook: [udev]
    [2012-08-06 22:20] -> Running build hook: [pata]
    [2012-08-06 22:20] -> Running build hook: [scsi]
    [2012-08-06 22:20] -> Running build hook: [sata]
    [2012-08-06 22:20] -> Running build hook: [filesystems]
    [2012-08-06 22:20] -> Running build hook: [usbinput]
    [2012-08-06 22:20] -> Running build hook: [fsck]
    [2012-08-06 22:20] ==> Generating module dependencies
    [2012-08-06 22:20] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2012-08-06 22:20] ==> Image generation successful
    [2012-08-06 22:20] upgraded linux (3.4.6-1 -> 3.4.7-1)
    [2012-08-06 22:20] upgraded mysql-clients (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded mysql (5.5.25.a-1 -> 5.5.27-1)
    [2012-08-06 22:20] upgraded nspr (4.9.1-1 -> 4.9.2-1)
    [2012-08-06 22:20] upgraded nvidia (302.17-4 -> 304.32-1)
    [2012-08-06 22:20] upgraded tzdata (2012d-1 -> 2012e-1)
    [2012-08-06 22:20] upgraded xf86-input-evdev (2.7.1-1 -> 2.7.2-1)
    [2012-08-06 22:23] Running 'pacman -S openjdk'
    [2012-08-06 22:23] Running 'pacman -S jdk7-openjdk'
    [2012-08-06 22:24] upgraded jdk7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:24] Running 'pacman -S jre7-openjdk'
    [2012-08-06 22:24] upgraded jre7-openjdk (7.u5_2.2.1-1 -> 7.u5_2.2.1-1)
    [2012-08-06 22:25] Running 'pacman -R pms'
    [2012-08-06 22:25] warning: /opt/pms/PMS.conf saved as /opt/pms/PMS.conf.pacsave
    [2012-08-06 22:25] removed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.QTF/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-06 22:26] installed pms (1.60.0-2)
    [2012-08-06 22:26] Running 'pacman -S vlc'
    [2012-08-06 22:26] installed libdvbpsi (0.2.2-1)
    [2012-08-06 22:26] installed sdl_image (1.2.12-2)
    [2012-08-06 22:26] installed libdvdread (4.2.0-1)
    [2012-08-06 22:26] installed libdvdnav (4.2.0-2)
    [2012-08-06 22:26] installed libkate (0.4.1-3)
    [2012-08-06 22:26] installed libtiger (0.3.4-3)
    [2012-08-06 22:26] installed libebml (1.2.2-2)
    [2012-08-06 22:26] installed libmatroska (1.3.0-2)
    [2012-08-06 22:26] installed zvbi (0.2.33-4)
    [2012-08-06 22:26] installed taglib (1.7.2-2)
    [2012-08-06 22:26] installed libmpcdec (1.2.6-3)
    [2012-08-06 22:26] installed libupnp (1.6.17-1)
    [2012-08-06 22:26] installed libshout (1:2.3.0-1)
    [2012-08-06 22:26] installed libmpeg2 (0.5.1-3)
    [2012-08-06 22:26] installed libmodplug (0.8.8.4-1)
    [2012-08-06 22:26] installed ttf-freefont (20120503-1)
    [2012-08-06 22:26] installed vlc (2.0.3-2)
    [2012-08-06 22:26] Running 'pacman -S lib32-gcc-libs lib32-glibc'
    [2012-08-06 22:26] upgraded lib32-glibc (2.16.0-2 -> 2.16.0-2)
    [2012-08-06 22:26] upgraded lib32-gcc-libs (4.7.1-5 -> 4.7.1-5)
    [2012-08-07 11:44] Running 'pacman --noconfirm --asdeps -S -- pacman-color'
    [2012-08-07 11:44] installed pacman-color (4.0.3-1)
    [2012-08-07 11:44] Running 'pacman -U packer-color-20120807-1-any.pkg.tar.xz'
    [2012-08-07 11:44] installed packer-color (20120807-1)
    [2012-08-07 11:50] Running 'pacman-color -S packer'
    [2012-08-07 15:50] Running 'pacman -Syyu'
    [2012-08-07 15:50] synchronizing package lists
    [2012-08-07 15:50] starting full system upgrade
    [2012-08-07 15:50] upgraded libwbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] upgraded smbclient (3.6.6-1 -> 3.6.7-1)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 15:51] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.77j/rutorrent-plugins-3.4-3-any.pkg.tar.xz'
    [2012-08-07 15:51] upgraded rutorrent-plugins (3.4-2 -> 3.4-3)
    [2012-08-07 15:51] Running 'pacman -Sy'
    [2012-08-07 15:51] synchronizing package lists
    [2012-08-07 16:02] Running 'pacman-color -S crontab'
    [2012-08-07 16:02] Running 'pacman-color -S cronjob'
    [2012-08-07 16:02] Running 'pacman-color -S cron'
    [2012-08-07 16:02] upgraded cronie (1.4.8-2 -> 1.4.8-2)
    [2012-08-07 16:04] Running 'pacman-color -S cronie'
    [2012-08-07 16:05] Running 'pacman-color -S esmtp procmail'
    [2012-08-07 16:05] installed libesmtp (1.0.6-2)
    [2012-08-07 16:05] installed esmtp (1.2-4)
    [2012-08-07 16:05] installed procmail (3.22-5)
    [2012-08-08 12:10] Running 'pacman -Sy'
    [2012-08-08 12:10] synchronizing package lists
    [2012-08-08 12:12] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.82R/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 12:12] upgraded pms (1.60.0-2 -> 1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -R pms'
    [2012-08-08 18:02] removed pms (1.60.0-2)
    [2012-08-08 18:02] Running 'pacman -Sy'
    [2012-08-08 18:02] synchronizing package lists
    [2012-08-08 18:03] Running 'pacman -U /tmp/yaourt-tmp-shauder/PKGDEST.BkP/pms-1.60.0-2-x86_64.pkg.tar.xz'
    [2012-08-08 18:03] installed pms (1.60.0-2)
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web'
    [2012-08-08 18:17] Running 'pacman -S extra/icedtea-web-java7'
    [2012-08-08 18:18] installed icedtea-web-java7 (1.2.1-2)
    [2012-08-08 18:36] Running 'pacman -R pms'
    [2012-08-08 1

    shadowlurker wrote:
    It's problem in pam configuration files. You need to create files useradd, userdel, groupadd and groupdel in /etc/pam.d/ directory with following content:
    auth sufficient pam_rootok.so
    auth required pam_unix.so
    account required pam_unix.so
    session required pam_unix.so
    password required pam_permit.so
    You da man! I also had to add grpconv and chage to get filesystem working but all seems well now thanks!
    Doug piston had me try something that I think will help anyone else who has this problem.  Try re-installing pambase and shadow.  It generated back most of any I was missing.
    Last edited by shauder (2012-11-03 00:55:19)

  • No TV sound - Problem with Pulseaudio and Gnome

    Hi Community!
    Since January 2013 I got big problems with the sound of my tvcard. The card is a Sundtek Media TV Pro. But after all the problems have nothing to to with the card itself!
    So far I found out, that the problem is with Pulseaudio.
    - Sound works under Windows on same PC.
    - Sound don't work under Arch - not with tvtime, not with vlc, etc.
    - Problem occurs even on a new installed system with the Arch-2013-02-01 install medium.
    cat /etc/mediasrv.log
    [1033] Pulseaudio connect reported an error (6 - Connection refused)
    [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    After setting up a new Arch installation with just xorg-server, gnome, tvtime and the sundtek driver from AUR I run journalctl -b:
    Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c:
    Daemon already running.
    With sudo journalctl | grep 'Feb 10 16:2' I get the following output:
    Feb 10 16:25:01 hightower rtkit-daemon[489]: Successfully made thread 488 of process 488 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
    Feb 10 16:25:14 hightower rtkit-daemon[489]: Successfully made thread 606 of process 606 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 10 16:25:15 hightower rtkit-daemon[489]: Successfully made thread 636 of process 636 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c: Daemon already running.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument:""): initialization failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
    Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Konnte Daemon nicht initialisieren.
    Feb 10 16:28:55 hightower pulseaudio[997]: [pulseaudio] main.c: Start des Daemons fehlgeschlagen.
    So, if I understand right, pulseaudio is alreade started by the rtkit-daemon and gnome couldn't start it again.
    At https://bugs.archlinux.org/task/30926 I found a hint concerning /etc/xdg/autostart/pulseaudio.desktop and /etc/xdg/autostart/pulseaudio-kde.desktop.
    After removing them from /etc/xdg/autostart and running journalctl -b there are no more errors.
    With sudo journalctl | grep 'pulseaudio' I get:
    sudo journalctl | grep 'Feb 10 17:4' | grep 'pulse*'
    Feb 10 17:41:42 hightower rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
    Feb 10 17:41:55 hightower rtkit-daemon[485]: Successfully made thread 625 of process 625 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    In my opinion all looks ok! I also checked the channels with the alsamixer and it looks good, too.
    So I ran vlc v4l2://:dev=/dev/video0:width=720:height=576:tuner-frequency=510750:adev=/dev/null:standard=255 - but still no sound.
    With cat /var/log/mediasrv.log I checked the drivers logfile:
    2013-02-10 17:48:55 [343] SETTING DVB-C
    2013-02-10 17:48:55 [343] switching to analog TV
    2013-02-10 17:48:56 [343] SETTING PAL/SECAM
    2013-02-10 17:48:58 [343] invalid audio input selected: 2
    2013-02-10 17:48:58 [343] Setting frequency: 510750000
    2013-02-10 17:48:58 [343] Using settings for Europe
    2013-02-10 17:48:58 [343] Set Pixelformat: 0 YUV 4:2:2 (YUYV)
    2013-02-10 17:48:58 [1033] Starting audio processor (PID 1033)
    2013-02-10 17:48:58 [1033] initializing audio in audio processor
    2013-02-10 17:48:58 [1033] loaded local pulseaudio driver
    2013-02-10 17:48:58 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
    2013-02-10 17:48:59 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
    2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
    I started tvtime again. This time I ran rm -rf ~/.config/pulse/ and killall pulseaudio to kill the Pulseaudio server. I instantly got a loud noise out of my speakers.
    I closed tvtime and re-opened it. And there it was: TV SOUND OUT OF MY SPEAKERS!
    But now, when I run pavucontrol I get:
    Connection to PulseAudio failed. Automatic retry in 5s.
    In this cas this is likely because PULSE_SERVER in the Environment/X11 root Windows Properties or default-server in client.conf is misconfigured.
    This situation can also arrise when PulseAudio crashed and left stale details in the X11 Root Windows.
    If this is the case, then PuseAudio should autospawn again, or if this is not configured you sould run start-pulseaudio-x11 manually.
    I got the information from Sundtek, that Pulseaudio should not be started as system service. Instead, every user should have an own Pulseaudio daemon and that PA was concepted this way. But they don't know how it is implemented in ArchLinux.
    I also don't know it exactly. So the question to all you ArchLinu pro's:
    How is PA implemented in Arch? And how can I sustainable solve my problem?
    Thank you for your time and help!
    Durag

    There is just one more thing I found out.
    After logging into Gnome and running ps aux | grep pulse I get:
    rebel 727 0.7 0.2 444316 10288 ? S<l 03:02 0:00 /usr/bin/pulseaudio --start --log-target=syslog
    rebel 731 0.0 0.0 71236 2652 ? S 03:02 0:00 /usr/lib/pulse/gconf-helper
    rebel 843 0.0 0.0 17396 1184 pts/0 D+ 03:03 0:00 grep pulse
    To get the sound to work I run:
    rm -rf .config/pulse/
    killall pulseaudio
    killall -9 pulseaudio
    I again run ps aux | grep pulse
    rebel 4016 4.2 0.2 510124 11528 ? Sl 03:06 0:02 /usr/bin/pulseaudio --start --log-target=syslog
    rebel 4020 0.0 0.0 71368 2700 ? S 03:06 0:00 /usr/lib/pulse/gconf-helper
    rebel 4046 0.0 0.0 19456 1216 pts/0 R+ 03:07 0:00 grep pulse
    I can recognize that the STATs have changed. Maybe this can help to solve the problem?

  • Problem with yosemite and parallels

    Since I have upgraded to yosemite and parallels 10 my windows 7 has been using a lot of CPU resources.  Windows 7 runs very slow and it been using almost constantly 100% of one of the quads resources.  This just started to happen when I upgraded, because I did not have this problem with Mavericks and Parallels 9 or 10. I have an iMac 2011, 8GB of Ram.  Has anybody had this issue.  Thanks.

    Thanks for the response.  I was searching on a parallels forum website and found the following:
    As from the symptoms, the issue can lie in NVRAM preferences of your particular Mac.
    Please do the following to solve:
    open Terminal application on Mac (Applications/Terminal.app)
    please type this command (you may copy-paste it to the terminal from this message):
    sudo nvram boot-args="debug=0xd4e"
    Hit Enter.
    You will be prompted to enter Mac user password. Please type it and hit Enter.
    Note: you won't see what you are typing, just type and hit Enter. If you don't have Mac user password, please create a temporary one.
    Then you may restart your Mac and the issue should be solved.
    If not - please reply me here and I'll create a ticket for you in Support.
    I did the above and it seemed to correct the problem.

  • [SOLVED] Problem with symlinking and PKGBUILD

    Hello Everyone,
    I have created the javafx-sdk package on AUR, and make the installation a lot simplier. But I am having a problem with the creationg of the symlink.
    So I have 1 binary file "javafxpackager" in the "bin" folder that I need to symlink into /usr/bin. This is the method I am using
    mkdir -p ${pkgdir}/usr/bin
    chmod +x ${pkgdir}/usr/lib/jvm/${pkgname}/bin/javafxpackager
    ln -s ${pkgdir}/usr/lib/jvm/${pkgname}/bin/javafxpackager ${pkgdir}/usr/bin/javafxpackager
    My problem is that this method doesn't work at all. The only way to me after the installation to make the symlink working is by doing this :
    ls chmod +x /usr/lib/jvm/javafx-sdk/bin/javafxpackager
    sudo ln -s /usr/lib/jvm/javafx-sdk/bin/javafxpackager /usr/bin/
    In order to make it work.
    How can I solve this problem ?
    Thanks in Advance,
    Luis Da Costa
    Last edited by aliasbody (2012-06-26 00:27:15)

    Problem solved ! Here's how to do it :
    mkdir -p ${pkgdir}/usr/bin
    chmod +x ${pkgdir}/usr/lib/jvm/${pkgname}/bin/javafxpackager
    ln -s /usr/lib/jvm/javafx-sdk/bin/javafxpackager ${pkgdir}/usr/bin/javafxpackager
    I didn't know, but you can symlink a file that doesn't exist yet, and this is what I did. I use and non existing (yet) javafxpackager binary from the non existing (yet) "/usr/lib/jvm/javafx-sdk/bin/" folder, and send it to the ${pkgdir}/usr/bin/javafxpackager, that will be copied into the original "/usr/bin/" folder.
    So this problem is solved and I'm happy
    (PS : thanks @ngoonee and @Trilby for you help ! Thanks to you I found out a little bit faster where the problem was ^^)

  • [SOLVED] Problem with zsnes and xcb_io.c on arch64

    Well after doing a pacman -Syu, zsnes won't start, when i run it, it gives me the next output
    [pablo@pablo-laptop ~]$ zsnes
    ZSNES v1.51, (c) 1997-2007, ZSNES Team
    Be sure to check http://www.zsnes.com/ for the latest version.
    ZSNES is written by the ZSNES Team (See AUTHORS.TXT)
    ZSNES comes with ABSOLUTELY NO WARRANTY. This is free software,
    and you are welcome to redistribute it under certain conditions;
    please read 'LICENSE.TXT' thoroughly before doing so.
    Use ZSNES -? for command line definitions.
    Starting Mouse detection.
    Unable to poll /dev/input/event11. Make sure you have read permissions to it.
    Unable to poll /dev/input/event10. Make sure you have read permissions to it.
    Unable to poll /dev/input/event9. Make sure you have read permissions to it.
    Unable to poll /dev/input/event8. Make sure you have read permissions to it.
    Unable to poll /dev/input/event7. Make sure you have read permissions to it.
    Unable to poll /dev/input/event6. Make sure you have read permissions to it.
    Unable to poll /dev/input/event5. Make sure you have read permissions to it.
    Unable to poll /dev/input/event4. Make sure you have read permissions to it.
    Unable to poll /dev/input/event3. Make sure you have read permissions to it.
    Unable to poll /dev/input/event2. Make sure you have read permissions to it.
    Unable to poll /dev/input/event1. Make sure you have read permissions to it.
    Unable to poll /dev/input/event0. Make sure you have read permissions to it.
    ManyMouse: 0 mice detected.
    zsnes: xcb_io.c:515: _XReply: Assertion `!dpy->xcb->reply_data' failed.
    Abortado
    it was working fine until yesterday, i've been searching about xcb_io.c but sadly i haven't found anything useful.
    Edit:
    it seems i can run it fine as sudo but not as a regular user
    Edit2:
    well it seems that there was something wrong with my .zsnes folder, i deleted it (well first i made a backup of it) and i can run zsnes again.
    Edit3:
    well, it seems i got a problem with opengl and my catalyst driver (but i'm guessing because i haven't tried with radeon) because i can use it without opengl but as soon as i change the video option to use opengl it crashes with the same error (zsnes: xcb_io.c:515: _XReply: Assertion `!dpy->xcb->reply_data' failed.) should i file a bug report or something???
    Last edited by jpablo (2011-08-30 17:12:55)

    Finally i had to edit my .htaccess file adding a RewriteBase rule to it.

  • I am having a DNS problem with my computer. My laptop connects to the internet and my skype works normally but when i try to surf the web it says "DNS Look up failed".

    MY PROBLEM
    I am having a DNS problem with my laptop. It connects normally to th e wifi internet but when i try to surf the net it says "DNS Look up failed"
    This problem only occurs when with the internet at my house. whenever i connect elsewhere my computer works normally. My ipod, iphone, tablet and other friends computers work normally when they are connected to my internet. i use dmy neigbours nework a couple of times from my house and it wrks normally.
    Also when i turn my laptop on or off i can browse for a few minutes or seconds before it fails again. My skype works like there is no problem
    WHAT I HAVE TRIED TO RESOLVE IT
    I have tried changing the DNS, i used open DNS and google free DNS and it still didnt make a difference.
    I have rebooted router many times, nothing
    I have changed my home router, nothing
    I backed up my computer, resored everything it to factory setting and put everything back on; still nothing
    Run a diagnostics at 'Best buy' and they say nothing is wrong; but i know there is something wrong with the DNS
    I have tried different "sudo" type of codes on my comupter from stuff i got online and nothign has proved fruitful yet.
    i tried using safari, Google chrome and firefox, all not loading
    WHAT DO I DO TO FIX THIS?

    You are correct.  Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases.  You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again:  Windows XP or Windows Vista/7.

  • Problem with user services (creating a service for mpdas)

    Hi, I'm using mpd and using a user service to start it.
    However, I'm trying to create a service for mpdas (a mpd client for last.fm) and getting some errors:
    currently, my mpdas.service is as following:
    [Unit]
    Description=AudoScrobbler client for MPD
    After=mpd.service
    [Service]
    ExecStart=/usr/bin/mpdas
    [Install]
    WantedBy=default.target
    Which giving me the following errors:
    (14:49:55) [ERROR] You are not root. Not changing user ..
    (14:49:55) [INFO] Connected to MPD.
    (14:49:56) [INFO] Last.fm handshake successful. SessionID: ...
    terminate called after throwing an instance of 'std::ios_base::failure'
      what():  basic_filebuf::underflow error reading the file
    Aborted
    Which are the same errors I get if I run just "mpdas" instead of running it with sudo.
    If I use it as a root service (instead of a user service) it fails on startup, but works fine when I restart the server.
    So, I'm assuming:
    1) mpdas needs root permission
    2) if used as a root service, it fails at startup cause the mpd service (enabled as a user service) hasn't started yet
    3) if used as a user service, it fails cause it needs root permission
    What's the 'correct' way to solve this? (I believe mpdas should be a user service, cause it runs with a config that is just for my user).
    Is there a way to make a user service run with root privileges?
    I couldn't figure out the best way to configure it.
    Last edited by alv-r- (2014-11-29 18:37:56)

    TheSaint wrote:Why should it fails with sudo?
    It works only with sudo. It was failing as a system service because it needs mpd, which I configured as an user service. Then when systemd starts the system services (when booting) there's not mpd instance running and it fails.
    TheSaint wrote:Doesn't it works with fakeroot ?
    As a noob, I don't know exactly how fakeroot works, I'll take a better look at it, but running it with fakeroot takes rid of the errors I was getting when not running as sudo.
    The problem I have now is that it still fails on startup, but there isn't any helpful (or unhelpful) message. It just shows the PID and says it failed.
    If I run
    systemctl --user start mpdas
    it works well though. Any ideas of why this happens?
    My current unit file looks like this:
    [Unit]
    Description=AudoScrobbler client for MPD
    After=mpd.service
    Requires=mpd.service
    [Service]
    ExecStart=/usr/bin/fakeroot /usr/bin/mpdas
    [Install]
    WantedBy=default.target
    Raynman wrote:Why does it need root privileges? Maybe you just need to configure it properly to run under your normal user?
    Seeing the options in the man page and the config options for the config file, I don't see any that could do the trick.
    I'll send a message to the developer with the error I'm getting (when not running as sudo).
    Last edited by alv-r- (2014-11-29 18:36:59)

  • Problems with kismet

    Hi, I had problems starting kismet...
    sudo kismet
    Launching kismet_server: /usr/bin/kismet_server
    Will drop privs to koala (1000) gid 1000
    No specific sources given to be enabled, all will be enabled.
    Non-RFMon VAPs will be destroyed on multi-vap interfaces (ie, madwifi-ng)
    Enabling channel hopping.
    Enabling channel splitting.
    NOTICE: Disabling channel hopping, no enabled sources are able to change channel.
    Source 0 (madwifi): Enabling monitor mode for madwifi_b source interface wlan0 channel 6...
    ERROR: Unable to create VAP: Operation not supported
    ERROR: Unable to create monitor-mode VAP
    WARNING: wlan0 appears to not accept the Madwifi-NG controls. Will attempt to configure it as a standard Madwifi-old interface. If you are using madwifi-ng, be sure to set the source interface to the wifiX control interface, NOT athX
    FATAL: Failed to retrieve list of private ioctls 95:Operation not supported
    Done.
    Here is my kismet.conf
    # Kismet config file
    # Most of the "static" configs have been moved to here -- the command line
    # config was getting way too crowded and cryptic. We want functionality,
    # not continually reading --help!
    # Version of Kismet config
    version=2007.09.R1
    # Name of server (Purely for organizational purposes)
    servername=Kismet
    # User to setid to (should be your normal user)
    suiduser=koala
    # Do we try to put networkmanager to sleep? If you use NM, this is probably
    # what you want to do, so that it will leave the interfaces alone while
    # Kismet is using them. This requires DBus support!
    networkmanagersleep=true
    # Sources are defined as:
    # source=sourcetype,interface,name[,initialchannel]
    # Source types and required drivers are listed in the README under the
    # CAPTURE SOURCES section.
    # The initial channel is optional, if hopping is not enabled it can be used
    # to set the channel the interface listens on.
    # YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
    source=madwifi_b,wlan0,madwifi
    # Comma-separated list of sources to enable. This is only needed if you defined
    # multiple sources and only want to enable some of them. By default, all defined
    # sources are enabled.
    # For example:
    # enablesources=prismsource,ciscosource
    # Automatically destroy VAPs on multi-vap interfaces (like madwifi-ng).
    # Madwifi-ng doesn't work in rfmon when non-rfmon VAPs are present, however
    # this is a fairly invasive change to the system so it CAN be disabled. Expect
    # things not to work in most cases if you do disable it, however.
    vapdestroy=true
    # Do we channelhop?
    channelhop=true
    # How many channels per second do we hop? (1-10)
    channelvelocity=5
    # By setting the dwell time for channel hopping we override the channelvelocity
    # setting above and dwell on each channel for the given number of seconds.
    #channeldwell=10
    # Do we split channels between cards on the same spectrum? This means if
    # multiple 802.11b capture sources are defined, they will be offset to cover
    # the most possible spectrum at a given time. This also controls splitting
    # fine-tuned sourcechannels lines which cover multiple interfaces (see below)
    channelsplit=true
    # Basic channel hopping control:
    # These define the channels the cards hop through for various frequency ranges
    # supported by Kismet. More finegrain control is available via the
    # "sourcechannels" configuration option.
    # Don't change the IEEE80211<x> identifiers or channel hopping won't work.
    # Users outside the US might want to use this list:
    # defaultchannels=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12
    defaultchannels=IEEE80211b:1,6,11,2,7,3,8,4,9,5,10
    # 802.11g uses the same channels as 802.11b...
    defaultchannels=IEEE80211g:1,6,11,2,7,3,8,4,9,5,10
    # 802.11a channels are non-overlapping so sequential is fine. You may want to
    # adjust the list depending on the channels your card actually supports.
    # defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,184,188,192,196,200,204,208,212,216
    defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64
    # Combo cards like Atheros use both 'a' and 'b/g' channels. Of course, you
    # can also explicitly override a given source. You can use the script
    # extras/listchan.pl to extract all the channels your card supports.
    defaultchannels=IEEE80211ab:1,6,11,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64
    # Fine-tuning channel hopping control:
    # The sourcechannels option can be used to set the channel hopping for
    # specific interfaces, and to control what interfaces share a list of
    # channels for split hopping. This can also be used to easily lock
    # one card on a single channel while hopping with other cards.
    # Any card without a sourcechannel definition will use the standard hopping
    # list.
    # sourcechannels=sourcename[,sourcename]:ch1,ch2,ch3,...chN
    # ie, for us channels on the source 'wlanngsource' (same as normal channel
    # hopping behavior):
    # sourcechannels=wlanngsource:1,6,11,2,7,3,8,4,9,5,10
    # Given two capture sources, "wlannga" and "wlanngb", we want wlannga to stay
    # on channel 6 and wlanngb to hop normally. By not setting a sourcechannels
    # line for wlanngb, it will use the standard hopping.
    # sourcechannels=wlannga:6
    # To assign the same custom hop channel to multiple sources, or to split the
    # same custom hop channel over two sources (if splitchannels is true), list
    # them all on the same sourcechannels line:
    # sourcechannels=wlannga,wlanngb,wlanngc:1,6,11
    # Port to serve GUI data
    tcpport=2501
    # People allowed to connect, comma seperated IP addresses or network/mask
    # blocks. Netmasks can be expressed as dotted quad (/255.255.255.0) or as
    # numbers (/24)
    allowedhosts=127.0.0.1
    # Address to bind to. Should be an address already configured already on
    # this host, reverts to INADDR_ANY if specified incorrectly.
    bindaddress=127.0.0.1
    # Maximum number of concurrent GUI's
    maxclients=5
    # Do we have a GPS?
    gps=true
    # Host:port that GPSD is running on. This can be localhost OR remote!
    gpshost=localhost:2947
    # Do we lock the mode? This overrides coordinates of lock "0", which will
    # generate some bad information until you get a GPS lock, but it will
    # fix problems with GPS units with broken NMEA that report lock 0
    gpsmodelock=false
    # Packet filtering options:
    # filter_tracker - Packets filtered from the tracker are not processed or
    # recorded in any way.
    # filter_dump - Packets filtered at the dump level are tracked, displayed,
    # and written to the csv/xml/network/etc files, but not
    # recorded in the packet dump
    # filter_export - Controls what packets influence the exported CSV, network,
    # xml, gps, etc files.
    # All filtering options take arguments containing the type of address and
    # addresses to be filtered. Valid address types are 'ANY', 'BSSID',
    # 'SOURCE', and 'DEST'. Filtering can be inverted by the use of '!' before
    # the address. For example,
    # filter_tracker=ANY(!00:00:DE:AD:BE:EF)
    # has the same effect as the previous mac_filter config file option.
    # filter_tracker=...
    # filter_dump=...
    # filter_export=...
    # Alerts to be reported and the throttling rates.
    # alert=name,throttle/unit,burst/unit
    # The throttle/unit describes the number of alerts of this type that are
    # sent per time unit. Valid time units are second, minute, hour, and day.
    # Burst rates control the number of packets sent at a time
    # For example:
    # alert=FOO,10/min,5/sec
    # Would allow 5 alerts per second, and 10 alerts total per minute.
    # A throttle rate of 0 disables throttling of the alert.
    # See the README for a list of alert types.
    alert=NETSTUMBLER,10/min,1/sec
    alert=WELLENREITER,10/min,1/sec
    alert=LUCENTTEST,10/min,1/sec
    alert=DEAUTHFLOOD,10/min,2/sec
    alert=BCASTDISCON,10/min,2/sec
    alert=CHANCHANGE,5/min,1/sec
    alert=AIRJACKSSID,5/min,1/sec
    alert=PROBENOJOIN,10/min,1/sec
    alert=DISASSOCTRAFFIC,10/min,1/sec
    alert=NULLPROBERESP,10/min,1/sec
    alert=BSSTIMESTAMP,10/min,1/sec
    alert=MSFBCOMSSID,10/min,1/sec
    alert=LONGSSID,10/min,1/sec
    alert=MSFDLINKRATE,10/min,1/sec
    alert=MSFNETGEARBEACON,10/min,1/sec
    alert=DISCONCODEINVALID,10/min,1/sec
    alert=DEAUTHCODEINVALID,10/min,1/sec
    # Known WEP keys to decrypt, bssid,hexkey. This is only for networks where
    # the keys are already known, and it may impact throughput on slower hardware.
    # Multiple wepkey lines may be used for multiple BSSIDs.
    # wepkey=00:DE:AD:C0:DE:00,FEEDFACEDEADBEEF01020304050607080900
    # Is transmission of the keys to the client allowed? This may be a security
    # risk for some. If you disable this, you will not be able to query keys from
    # a client.
    allowkeytransmit=true
    # How often (in seconds) do we write all our data files (0 to disable)
    writeinterval=300
    # How old (and inactive) does a network need to be before we expire it?
    # This is really only good for limited ram environments where keeping a
    # total log of all networks is problematic. This is in seconds, and should
    # be set to a large value like 12 or 24 hours. This is intended for use
    # on stationary systems like an IDS
    # logexpiry=86400
    # Do we limit the number of networks we log? This is for low-ram situations
    # when tracking everything could lead to the system falling down. This
    # should be combined with a sane logexpiry value to flush out very old
    # inactive networks. This is mainly for stationary systems like an IDS.
    # limitnets=10000
    # Do we track IVs? this can help identify some attacks, but takes a LOT
    # of memory to do so on a busy network. If you have the RAM, by all
    # means turn it on.
    trackivs=false
    # Do we use sound?
    # Not to be confused with GUI sound parameter, this controls wether or not the
    # server itself will play sound. Primarily for headless or automated systems.
    sound=false
    # Path to sound player
    soundplay=/usr/bin/play
    # Optional parameters to pass to the player
    # soundopts=--volume=.3
    # New network found
    sound_new=/usr/share/kismet/wav/new_network.wav
    # Wepped new network
    # sound_new_wep=/usr/com/kismet/wav/new_wep_network.wav
    # Network traffic sound
    sound_traffic=/usr/share/kismet/wav/traffic.wav
    # Network junk traffic found
    sound_junktraffic=/usr/share/kismet/wav/junk_traffic.wav
    # GPS lock aquired sound
    # sound_gpslock=/usr/share/kismet/wav/foo.wav
    # GPS lock lost sound
    # sound_gpslost=/usr/share/kismet/wav/bar.wav
    # Alert sound
    sound_alert=/usr/share/kismet/wav/alert.wav
    # Does the server have speech? (Again, not to be confused with the GUI's speech)
    speech=false
    # Server's path to Festival
    festival=/usr/bin/festival
    # Are we using festival lite? If so, set the above "festival" path to also
    # point to the "flite" binary
    flite=false
    # Are we using Darwin speech?
    darwinsay=false
    # What voice do we use? (Currently only valid on Darwin)
    speech_voice=default
    # How do we speak? Valid options:
    # speech Normal speech
    # nato NATO spellings (alpha, bravo, charlie)
    # spell Spell the letters out (aye, bee, sea)
    speech_type=nato
    # speech_encrypted and speech_unencrypted - Speech templates
    # Similar to the logtemplate option, this lets you customize the speech output.
    # speech_encrypted is used for an encrypted network spoken string
    # speech_unencrypted is used for an unencrypted network spoken string
    # %b is replaced by the BSSID (MAC) of the network
    # %s is replaced by the SSID (name) of the network
    # %c is replaced by the CHANNEL of the network
    # %r is replaced by the MAX RATE of the network
    speech_encrypted=New network detected, s.s.i.d. %s, channel %c, network encrypted.
    speech_unencrypted=New network detected, s.s.i.d. %s, channel %c, network open.
    # Where do we get our manufacturer fingerprints from? Assumed to be in the
    # default config directory if an absolute path is not given.
    ap_manuf=ap_manuf
    client_manuf=client_manuf
    # Use metric measurements in the output?
    metric=false
    # Do we write waypoints for gpsdrive to load? Note: This is NOT related to
    # recent versions of GPSDrive's native support of Kismet.
    waypoints=false
    # GPSDrive waypoint file. This WILL be truncated.
    waypointdata=%h/.gpsdrive/way_kismet.txt
    # Do we want ESSID or BSSID as the waypoint name ?
    waypoint_essid=false
    # How many alerts do we backlog for new clients? Only change this if you have
    # a -very- low memory system and need those extra bytes, or if you have a high
    # memory system and a huge number of alert conditions.
    alertbacklog=50
    # File types to log, comma seperated
    # dump - raw packet dump
    # network - plaintext detected networks
    # csv - plaintext detected networks in CSV format
    # xml - XML formatted network and cisco log
    # weak - weak packets (in airsnort format)
    # cisco - cisco equipment CDP broadcasts
    # gps - gps coordinates
    logtypes=dump,network,csv,xml,weak,cisco,gps
    # Do we track probe responses and merge probe networks into their owners?
    # This isn't always desireable, depending on the type of monitoring you're
    # trying to do.
    trackprobenets=true
    # Do we log "noise" packets that we can't decipher? I tend to not, since
    # they don't have anything interesting at all in them.
    noiselog=false
    # Do we log corrupt packets? Corrupt packets have enough header information
    # to see what they are, but someting is wrong with them that prevents us from
    # completely dissecting them. Logging these is usually not a bad idea.
    corruptlog=true
    # Do we log beacon packets or do we filter them out of the dumpfile
    beaconlog=true
    # Do we log PHY layer packets or do we filter them out of the dumpfile
    phylog=true
    # Do we mangle packets if we can decrypt them or if they're fuzzy-detected
    mangledatalog=true
    # Do we do "fuzzy" crypt detection? (byte-based detection instead of 802.11
    # frame headers)
    # valid option: Comma seperated list of card types to perform fuzzy detection
    # on, or 'all'
    fuzzycrypt=wtapfile,wlanng,wlanng_legacy,wlanng_avs,hostap,wlanng_wext,ipw2200,ipw2915
    # Do we do forgiving fuzzy packet decoding? This lets us handle borked drivers
    # which don't indicate they're including FCS, and then do.
    fuzzydecode=wtapfile,radiotap_bsd_a,radiotap_bsd_g,radiotap_bsd_bg,radiotap_bsd_b,pcapfile
    # Do we use network-classifier fuzzy-crypt detection? This means we expect
    # packets that are associated with an encrypted network to be encrypted too,
    # and we process them by the same fuzzy compare.
    # This essentially replaces the fuzzycrypt per-source option.
    netfuzzycrypt=true
    # What type of dump do we generate?
    # valid option: "wiretap"
    dumptype=wiretap
    # Do we limit the size of dump logs? Sometimes ethereal can't handle big ones.
    # 0 = No limit
    # Anything else = Max number of packets to log to a single file before closing
    # and opening a new one.
    dumplimit=0
    # Do we write data packets to a FIFO for an external data-IDS (such as Snort)?
    # See the docs before enabling this.
    #fifo=/tmp/kismet_dump
    # Default log title
    logdefault=Kismet
    # logtemplate - Filename logging template.
    # This is, at first glance, really nasty and ugly, but you'll hardly ever
    # have to touch it so don't complain too much.
    # %n is replaced by the logging instance name
    # %d is replaced by the current date as Mon-DD-YYYY
    # %D is replaced by the current date as YYYYMMDD
    # %t is replaced by the starting log time
    # %i is replaced by the increment log in the case of multiple logs
    # %l is replaced by the log type (dump, status, crypt, etc)
    # %h is replaced by the home directory
    # ie, "netlogs/%n-%d-%i.dump" called with a logging name of "Pok" could expand
    # to something like "netlogs/Pok-Dec-20-01-1.dump" for the first instance and
    # "netlogs/Pok-Dec-20-01-2.%l" for the second logfile generated.
    # %h/netlots/%n-%d-%i.dump could expand to
    # /home/foo/netlogs/Pok-Dec-20-01-2.dump
    # Other possibilities: Sorting by directory
    # logtemplate=%l/%n-%d-%i
    # Would expand to, for example,
    # dump/Pok-Dec-20-01-1
    # crypt/Pok-Dec-20-01-1
    # and so on. The "dump", "crypt", etc, dirs must exist before kismet is run
    # in this case.
    logtemplate=%n-%d-%i.%l
    # Where do we store the pid file of the server?
    piddir=/var/run/
    # Where state info, etc, is stored. You shouldnt ever need to change this.
    # This is a directory.
    configdir=%h/.kismet/
    # cloaked SSID file. You shouldn't ever need to change this.
    ssidmap=ssid_map
    # Group map file. You shouldn't ever need to change this.
    groupmap=group_map
    # IP range map file. You shouldn't ever need to change this.
    ipmap=ip_map
    I'm just not sure if the "source:" is correct...:)
    Here is my lspci
    00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
    00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
    00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
    00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
    01:00.0 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller
    01:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller
    01:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
    01:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
    03:00.0 Ethernet controller: Atheros Communications Inc. AR242x 802.11abg Wireless PCI Express Adapter (rev 01)
    04:00.0 System peripheral: JMicron Technologies, Inc. SD/MMC Host Controller
    04:00.2 SD Host controller: JMicron Technologies, Inc. Standard SD Host Controller
    04:00.3 System peripheral: JMicron Technologies, Inc. MS Host Controller
    04:00.4 System peripheral: JMicron Technologies, Inc. xD Host Controller
    Thanks is advance guyz..:)

    [koala@myhost ~]$ lsmod
    Module Size Used by
    uhci_hcd 18764 0
    video 16208 0
    backlight 3652 1 video
    ath_pci 207800 0
    wlan 186612 1 ath_pci
    ath_hal 298208 1 ath_pci
    ath5k 88896 0
    Here is my lsmod...:)

Maybe you are looking for

  • Clicking a tree node does not refresh the fields in the table component

    hi all, I am using a tree component along with a table component in my page.so whenever i am clicking on a node it should display the relevant information of that node in the table from the database.But whenever i am doing the page is not refreshing

  • Can you have two psswords for an Itunes account?

    My kids have i pods. They tell me they need the password I set up for normal use of the i pods. I have had problems with them buying apps they thought where free etc. Is it possible to have one password for purchases and one for normal use and free a

  • Query accessing SSAS cube is taking more time in power view report

    Hi, My SSAS server is having 16 Core's . I have created a power view in sharepoint site, which is accessing ssas cube. The report is taking more time to show the result.  I traced the DAX query using SQL Server profiler. When I ran this DAX query in

  • Problem to bb id sing in

    hello when i sing in my bb id by z10 I get a message that : ""unable to sing in to black berry ID.make sure that you have set current date and time and try again."" why?? help me plz

  • Problems with f:convertDateTime and f:convertNumber

    Hi, My code is as follows.      <h:outputText value=" #{orderBean.order.dateTimeOfOrder}" style= "font-size: 1.0em">      <f:convertDateTime type="date" pattern="dd.MM.yyyy HH:mm"  />      <h:outputText value=" #{orderBean.order.totalCostIncGST}" sty