Clicking a tree node does not refresh the fields in the table component

hi all,
I am using a tree component along with a table component in my page.so whenever i am clicking on a node it should display the relevant information of that node in the table from the database.But whenever i am doing the page is not refreshing and the old values of the textfields in the table still exist.i have written the code to populate the table in a button click event.It is working fine but the same is not working when i am clicking any node in the tree component.Can anyone provide a solution to this problem.
Thanks and regards,
Prasant Kumar

Never mind... I actually found something that works...
treeModel.nodeStructureChanged(leadSelection);

Similar Messages

  • Screen does not refresh unless i move the mouse

    I have a samsung screen plugged into my laptop via VGA cable.
    When I am browsing the screen seems to hang unless I constantly jiggle the mouse. If my mouse is back on the laptop screen, the screen freezes until the mouse comes back over to the other screen

    I noticed this behaviour after upgrading Firefox 4 to Firefox 5.
    I resolved this problem by checking my Add-Ons.
    One add-on was invalid with Firefox 5 and I just uninstalled that and my other add-ons (except FireBug) and everything was good again!

  • When the screen saver turns off my front panel does not refresh.

    when the screen saver turns off my front panel does not refresh. If I use the show desktop button sometimes I can not maximize my vi by just clicking on it from the start bar.

    I utilize both a screen saver and the show desktop feature but have never seen this problem in the past. You might play around with your screen saver settings to see if they have any affect. You might also try another computer just to make sure something larger scale isn't going on. Also, testing with other programs to make sure it isn't a general OS issue is always a good idea. Other possibilities include changing your Video Driver settings, updating your video driver, and uninstalling - reinstalling.

  • Firefox does not refresh the page after posting on IPS forums

    I visit the forums at www.sailinganarchy.com. After replying to a post firefox does not refresh the page to show that the post is posted. But I open IE and I can see that the post is posted properly.
    I am using FF 3.6.8 and this issue has only started in the last few days.
    I am
    == URL of affected sites ==
    http://

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    You can also check the Web Console (Firefox/Tools > Web Developer) to see if there are specific error messages.
    *https://developer.mozilla.org/Tools/Web_Console

  • Mac Mail (Lion) clicking on reply arrow does not open up the reply

    In OSX 10.5 in mail, after I have repolied to an email, an arrow appears to the left of the email. When I click on the arrow, it opens up the replied-email. a great feature. Now I have OSX 10.6 (Lion) and the feature does not work.   nothing in the preferences points to that feature. Any help would be appreciated.
    Thanks

    Thanks Jason, I had the same problem and did exactly the steps above. Problem solved! You rock! :)

  • The selected context node does not have attributes - Message no. SWDP_WB_TO

    Hello,
    I am trying out the example in web dynpro documentation -> Creating a Simple Flight Info Application
    and in part 3 steps 11 - 13 I get the following error
    The selected context node does not have attributes
    and the associated message class and # is :
    Message no. SWDP_WB_TOOL467
    can anyone please help ?

    Hi Raj,
    Have you done the steps 7 and 8 as described
    7.      Create an additional node called u201CflightSu201D, this time with the cardinality 0..n.
    8.      Use the Create Using Wizard option of the context node again to define attributes from the SFLIGHT structure for this new node (see part 1, step 15). Choose the following fields: CARRID, CONNID, FLDATE, PRICE and PLANETYPE.
    See the flights node , if there are no attributes the perform the steps as described in 8.

  • System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

    System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally  gets through.

    Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
    Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
    802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
    You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
    Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

  • When at the "results" page of a search, clicking on "blue" link does not display webpage. Copying "green" urldoes.

    When at the "results" page of a search, clicking on "blue" link does not display webpage although url is shown in address bar. Copying "green" url, shown at bottom of a result, into address bar and hitting "enter" goes to the address and displays the page. Have tried different selections at tools/options with no change. Is there some other setting that needs to be changed?

    Sorry, this is bad reply. I wanted to write this reply to another question.

  • On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being directions from here, the right click does work on Google map when using Safari

    On a Mac v10.6.6 Firefox v3.6.13 Right click on Google Map does not bring up the drop down box, with the first item being "directions from here", the right click does work on Google map when using Safari

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • When I open a link in gmail the website opens as a completely black page and when I click anywhere in the page the whole thing turns white and there is nothing showing. This does not happen when I open the same link in IE

    When I click on a link in gmail it will open the website as a black page. When I click anywhere on the page it turns completely white with nothing there. This does not happen when I open the same link in IE
    == URL of affected sites ==
    http://all

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • Error:The node does not contain any elements

    Hi Experts,
    I am getting this error.
      The following error text was processed in the system SR6 :  The node does not contain any elements. COMPONENTCONTROLLER.1.ROADMAP
    The error occurred on the application server server6_SR6_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
          Method: RAISEELEMENT_NOT_FOUND of program CL_WDR_CONTEXT_NODE===========CP
          Method: IF_WD_CONTEXT_NODE~SET_STATIC_ATTRIBUTES of program CL_WDR_CONTEXT_NODE_VAL=======CP
          Method: WDDOINIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
          Method: IF_WDR_COMPONENT_DELEGATE~WD_DO_INIT of program /1BCWDY/G25NECI0LTPP66VI3KOI==CP
          Method: DO_INIT of program CL_WDR_DELEGATING_COMPONENT===CP
          Method: INIT_CONTROLLER of program CL_WDR_CONTROLLER=============CP
          Method: INIT_CONTROLLER of program CL_WDR_COMPONENT==============CP
          Method: INIT of program CL_WDR_CONTROLLER=============CP
          Method: INIT of program CL_WDR_CLIENT_COMPONENT=======CP
          Method: INIT of program CL_WDR_CLIENT_APPLICATION=====CP
    What is the problem here?
    Thank you.
    Lalitha.

    (Assuming you have created elements for node...)
    Definitely it is cardinality problem, please check that... Try to understand below points to avoid such error.
    When a node is created in the context of a Web Dynpro component, the cardinality of the node is specified. The cardinality defines how often a node is to be instantiated at runtime u2013 that is, how many elements of this node are available at runtime.
    u2022        1u20261          Only one element is instantiated.
    u2022        0u20261          At runtime, no more than one element is instantiated, but it is also possible that no element is instantiated.
    u2022        1u2026n          n elements can be instantiated, but at least one element must be instantiated.
    u2022        0u2026n          The number of instantiated elements of the context node can vary.
    The cardinalities 0..n and 1..n correspond to the declaration of an internal table. The cardinality 1..1 corresponds to the declaration of a structure.
    Thanks,
    Swanand.

  • When trying to download it pops up with a window saying with current user i may not be able to do everything and is asking for administrater password or continue with current user? when i click current user it does nothing and i dont know the password

    when trying to download it pops up with a window saying with current user i may not be able to do everything and is asking for administrater password or continue with current user? when i click current user it does nothing and i dont know the password
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    Not from your end. Click here and ask the iTunes Store staff for assistance.
    (126716)

  • Publishing to RoboHElp Server 9 with RH 9 does not refresh the webhelp pro toolbar

    Hi,
    We have an issue with publishing to RH9 Server from a RH9 project.
    When we open the published file from this URL:
    http://ntrobohlpd02:8080/Robohelp/server?prj=Tests_2_Entreprise_FR
    The toolbar (where the TOC, index etc. icons are displayed) comes from another project:
    The toolbar that should display is this one (large green and grey icons):
    Why does the server show the whkin_tbars.htm from another project?
    Really weird.
    We've tried to restart the server as mentionned by Adobe tech support when I contacted them. It worked once, but will we need to restart the server every time we want to publish?
    Thanks

    Presumably the same does not happen if you view the help from the generated location. What happens if you launch the help from the server or from the Web Administrator?
    I always suggest that people manually delete all the files from the server area location before they publish their output. The publish process is unlike the generate process. It is effectively just a copy an leaves all sort of unnecessary files behind from the previous publish. By publishing to a "clean" location you know that the content is good.
    You may also want to delete your browser cache. This has been known to cause confusion by displaying a cached (and therefore old) file. Let us know how you get on.

  • ITunes does not refresh the CD device when insterting a new CD for importin

    After importing a CD I eject the CD, with either the iTunes eject button or my CD drive, upon placing a new CD in the drive iTunes does not recognize it..showing the old CD name and files...
    I then have to close iTunes and reload it... it now sees the new CD and I can import it...
    HELP...

    i have the exact same problem.
    sometimes it will recoginize that theres a cd
    but most of the time it wont
    and i've tried it with a lot of different cd's.
    help in this matter would be incredibly appreciated

  • My back and forward buttons do not work also the refreash button does not work, I have reloaded the latest version of fire fox and that did not help. HELP please.

    My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

Maybe you are looking for

  • Startx gives white screen with mouse cursor after upgrade

    Hello, I have been a long time lurker and I have finally come across a problem I havent been able to find anywhere else.  I just updated the catalyst-hook package and now on startx I get a white screen with a working mouse cursor and apparently my ke

  • Printing smartform

    Hi All,   My requirement is to convert the smartform to PDF and print it simulteneously. I'm using the fm <b>convert_otf_2_pdf</b> to convert the smartform into PDF. How can I print the smartform soon after converting it to PDF format?

  • How do I export/inport an activity diagram for someone else to make updates

    I created several projects with activity diagrams. Someone else need to update just the diagram. How can I make this available to them. Thanks,

  • When-timer-expired

    Hi everyone, This is my first time using this trigger and i dont really catch what to do to make it fire. Arwind advices me to use it to make the valus of the item blink. The way i see it it should work but i guess i'm missing something...could u plz

  • Flash Player won't load game in Facebook using Google Chrome

    I have a Windows 7, 32 bit.  I like to use Google Chrome.  I have one game that won't load.  I have went through all the troubleshooting steps.  I noticed that the settings won't save the "use unlimited" setting.  I have changed it several times and