Problem with sun Cluster

Hi all !
I've problem with cluster, server cannot see HDD from storedge.
state-
- in �ok� , use "probe-scsi-all" command : hap203 can detect all 14 HDD ( 4 HDD local, 5 HDD from 3310_1 and 5 HDD from 3310_2) ; hap103 detect only 13 HDD ( 4 local, 5 from 3310_1 and only 4 from 3310_2 )
- use �format� command on hap203, this server can detect 14 HDD ( from 0 to 13 ) ; but type �format� on hap103, only see 9 HDD (from 0 to 8).
- type �devfsadm �C� on hap103 ----> notice error about HDD.
- type "scstat" on hap103 ----------> Resorce Group : hap103' status is �pending online� and hap203's status is "offline".
- type "metastat �s dgsmp" on hap103 : notice �need maintenance�.
Help me if you can.
Many thanks.
Long.
-----------------------------ok_log-------------------------
########## hap103 ##################
{3} ok probe-scsi-all
/pci@1f,700000/scsi@2,1
/pci@1f,700000/scsi@2
Target 0
Unit 0 Disk SEAGATE ST373307LSUN72G 0507 143374738 Blocks, 70007 MB
Target 1
Unit 0 Disk SEAGATE ST373307LSUN72G 0507 143374738 Blocks, 70007 MB
Target 2
Unit 0 Disk HITACHI DK32EJ72NSUN72G PQ0B 143374738 Blocks, 70007 MB
Target 3
Unit 0 Disk HITACHI DK32EJ72NSUN72G PQ0B 143374738 Blocks, 70007 MB
/pci@1d,700000/pci@2/scsi@5
Target 8
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target 9
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target a
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target b
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target c
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target f
Unit 0 Processor SUN StorEdge 3310 D1159
/pci@1d,700000/pci@2/scsi@4
/pci@1c,600000/pci@1/scsi@5
Target 8
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target 9
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target a
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target b
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target f
Unit 0 Processor SUN StorEdge 3310 D1159
/pci@1c,600000/pci@1/scsi@4
############ hap203 ###################################
{3} ok probe-scsi-all
/pci@1f,700000/scsi@2,1
/pci@1f,700000/scsi@2
Target 0
Unit 0 Disk SEAGATE ST373307LSUN72G 0507 143374738 Blocks, 70007 MB
Target 1
Unit 0 Disk SEAGATE ST373307LSUN72G 0507 143374738 Blocks, 70007 MB
Target 2
Unit 0 Disk HITACHI DK32EJ72NSUN72G PQ0B 143374738 Blocks, 70007 MB
Target 3
Unit 0 Disk HITACHI DK32EJ72NSUN72G PQ0B 143374738 Blocks, 70007 MB
/pci@1d,700000/pci@2/scsi@5
Target 8
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target 9
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target a
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target b
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target c
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target f
Unit 0 Processor SUN StorEdge 3310 D1159
/pci@1d,700000/pci@2/scsi@4
/pci@1c,600000/pci@1/scsi@5
Target 8
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target 9
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target a
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target b
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target c
Unit 0 Disk FUJITSU MAP3735N SUN72G 0401
Target f
Unit 0 Processor SUN StorEdge 3310 D1159
/pci@1c,600000/pci@1/scsi@4
{3} ok
------------------------hap103-------------------------
hap103>
hap103> format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c1t8d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@8,0
1. c1t9d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@9,0
2. c1t10d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@a,0
3. c1t11d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@b,0
4. c1t12d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@c,0
5. c3t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@0,0
6. c3t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@1,0
7. c3t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@2,0
8. c3t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@3,0
Specify disk (enter its number): ^D
hap103>
hap103>
hap103>
hap103> scstart t
-- Cluster Nodes --
Node name Status
Cluster node: hap103 Online
Cluster node: hap203 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: hap103:ce7 hap203:ce7 Path online
Transport path: hap103:ce3 hap203:ce3 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: hap103 1 1 Online
Node votes: hap203 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d1s2 1 1 Online
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: dgsmp hap103 hap203
-- Device Group Status --
Device Group Status
Device group status: dgsmp Online
-- Resource Groups and Resources --
Group Name Resources
Resources: rg-smp has-res SDP1 SMFswitch
-- Resource Groups --
Group Name Node Name State
Group: rg-smp hap103 Pending online
Group: rg-smp hap203 Offline
-- Resources --
Resource Name Node Name State Status Message
Resource: has-res hap103 Offline Unknown - Starting
Resource: has-res hap203 Offline Offline
Resource: SDP1 hap103 Offline Unknown - Starting
Resource: SDP1 hap203 Offline Offline
Resource: SMFswitch hap103 Offline Offline
Resource: SMFswitch hap203 Offline Offline
hap103>
hap103>
hap103> metastat -s dgsmp
dgsmp/d120: Mirror
Submirror 0: dgsmp/d121
State: Needs maintenance
Submirror 1: dgsmp/d122
State: Needs maintenance
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 716695680 blocks
dgsmp/d121: Submirror of dgsmp/d120
State: Needs maintenance
Invoke: after replacing "Maintenance" components:
metareplace dgsmp/d120 d5s0 <new device>
Size: 716695680 blocks
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase State Hot Spare
d1s0 0 No Maintenance
d2s0 0 No Maintenance
d3s0 0 No Maintenance
d4s0 0 No Maintenance
d5s0 0 No Last Erred
dgsmp/d122: Submirror of dgsmp/d120
State: Needs maintenance
Invoke: after replacing "Maintenance" components:
metareplace dgsmp/d120 d6s0 <new device>
Size: 716695680 blocks
Stripe 0: (interlace: 32 blocks)
Device Start Block Dbase State Hot Spare
d6s0 0 No Last Erred
d7s0 0 No Okay
d8s0 0 No Okay
d9s0 0 No Okay
d10s0 0 No Resyncing
hap103> May 6 14:55:58 hap103 login: ROOT LOGIN /dev/pts/1 FROM ralf1
hap103>
hap103>
hap103>
hap103>
hap103> scdidadm -l
1 hap103:/dev/rdsk/c0t8d0 /dev/did/rdsk/d1
2 hap103:/dev/rdsk/c0t9d0 /dev/did/rdsk/d2
3 hap103:/dev/rdsk/c0t10d0 /dev/did/rdsk/d3
4 hap103:/dev/rdsk/c0t11d0 /dev/did/rdsk/d4
5 hap103:/dev/rdsk/c0t12d0 /dev/did/rdsk/d5
6 hap103:/dev/rdsk/c1t8d0 /dev/did/rdsk/d6
7 hap103:/dev/rdsk/c1t9d0 /dev/did/rdsk/d7
8 hap103:/dev/rdsk/c1t10d0 /dev/did/rdsk/d8
9 hap103:/dev/rdsk/c1t11d0 /dev/did/rdsk/d9
10 hap103:/dev/rdsk/c1t12d0 /dev/did/rdsk/d10
11 hap103:/dev/rdsk/c2t0d0 /dev/did/rdsk/d11
12 hap103:/dev/rdsk/c3t0d0 /dev/did/rdsk/d12
13 hap103:/dev/rdsk/c3t1d0 /dev/did/rdsk/d13
14 hap103:/dev/rdsk/c3t2d0 /dev/did/rdsk/d14
15 hap103:/dev/rdsk/c3t3d0 /dev/did/rdsk/d15
hap103>
hap103>
hap103> more /etc/vfstab
[49;1H[K#device device mount   FS      fsck    mount   mount
#to     mount   to      fsck            point           type    pass    at boot options
#/dev/dsk/c1d0s2        /dev/rdsk/c1d0s2        /usr    ufs     1       yes     -
fd      -       /dev/fd fd      -       no      -
/proc   -       /proc   proc    -       no      -
/dev/md/dsk/d20 -       -       swap    -       no      -
/dev/md/dsk/d10 /dev/md/rdsk/d10        /       ufs     1       no      logging
#/dev/dsk/c3t0d0s3      /dev/rdsk/c3t0d0s3      /globaldevices ufs     2       yes     logging
/dev/md/dsk/d60 /dev/md/rdsk/d60        /in     ufs     2       yes     logging
/dev/md/dsk/d40 /dev/md/rdsk/d40        /in/oracle      ufs     2       yes     logging
/dev/md/dsk/d50 /dev/md/rdsk/d50        /indelivery     ufs     2       yes     logging
swap    -       /tmp    tmpfs   -       yes     -
/dev/md/dsk/d30 /dev/md/rdsk/d30        /global/.devices/node@1 ufs     2       no      global
/dev/md/dgsmp/dsk/d120 /dev/md/dgsmp/rdsk/d120 /in/smp ufs     2       yes     logging,global
#RALF1:/in/RALF1 - /inbackup/RALF1 nfs - yes rw,bg,soft
[K[1;7mvfstab: END[m
[Khap103> df -h
df: unknown option: h
Usage: df [-F FSType] [-abegklntVv] [-o FSType-specific_options] [directory | block_device | resource]
hap103>
hap103>
hap103>
hap103> df -k
Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d10 4339374 3429010 866971 80% /
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
mnttab 0 0 0 0% /etc/mnttab
swap 22744256 136 22744120 1% /var/run
swap 22744144 24 22744120 1% /tmp
/dev/md/dsk/d50 1021735 2210 958221 1% /indelivery
/dev/md/dsk/d60 121571658 1907721 118448221 2% /in
/dev/md/dsk/d40 1529383 1043520 424688 72% /in/oracle
/dev/md/dsk/d33 194239 4901 169915 3% /global/.devices/node@2
/dev/md/dsk/d30 194239 4901 169915 3% /global/.devices/node@1
------------------log_hap203---------------------------------
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t8d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/pci@1/scsi@5/sd@8,0
1. c0t9d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/pci@1/scsi@5/sd@9,0
2. c0t10d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/pci@1/scsi@5/sd@a,0
3. c0t11d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/pci@1/scsi@5/sd@b,0
4. c0t12d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/pci@1/scsi@5/sd@c,0
5. c1t8d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@8,0
6. c1t9d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@9,0
7. c1t10d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@a,0
8. c1t11d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@b,0
9. c1t12d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1d,700000/pci@2/scsi@5/sd@c,0
10. c3t0d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@0,0
11. c3t1d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@1,0
12. c3t2d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@2,0
13. c3t3d0 <SUN72G cyl 14087 alt 2 hd 24 sec 424>
/pci@1f,700000/scsi@2/sd@3,0
Specify disk (enter its number): ^D
hap203>
hap203> scstart t
-- Cluster Nodes --
Node name Status
Cluster node: hap103 Online
Cluster node: hap203 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: hap103:ce7 hap203:ce7 Path online
Transport path: hap103:ce3 hap203:ce3 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: hap103 1 1 Online
Node votes: hap203 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d1s2 1 1 Online
-- Device Group Servers --
Device Group Primary Secondary
Device group servers: dgsmp hap103 hap203
-- Device Group Status --
Device Group Status
Device group status: dgsmp Online
-- Resource Groups and Resources --
Group Name Resources
Resources: rg-smp has-res SDP1 SMFswitch
-- Resource Groups --
Group Name Node Name State
Group: rg-smp hap103 Pending online
Group: rg-smp hap203 Offline
-- Resources --
Resource Name Node Name State Status Message
Resource: has-res hap103 Offline Unknown - Starting
Resource: has-res hap203 Offline Offline
Resource: SDP1 hap103 Offline Unknown - Starting
Resource: SDP1 hap203 Offline Offline
Resource: SMFswitch hap103 Offline Offline
Resource: SMFswitch hap203 Offline Offline
hap203>
hap203>
hap203> devfsadm- -C
hap203>
hap203> scdidadm -l
1 hap203:/dev/rdsk/c0t8d0 /dev/did/rdsk/d1
2 hap203:/dev/rdsk/c0t9d0 /dev/did/rdsk/d2
3 hap203:/dev/rdsk/c0t10d0 /dev/did/rdsk/d3
4 hap203:/dev/rdsk/c0t11d0 /dev/did/rdsk/d4
5 hap203:/dev/rdsk/c0t12d0 /dev/did/rdsk/d5
6 hap203:/dev/rdsk/c1t8d0 /dev/did/rdsk/d6
7 hap203:/dev/rdsk/c1t9d0 /dev/did/rdsk/d7
8 hap203:/dev/rdsk/c1t10d0 /dev/did/rdsk/d8
9 hap203:/dev/rdsk/c1t11d0 /dev/did/rdsk/d9
10 hap203:/dev/rdsk/c1t12d0 /dev/did/rdsk/d10
16 hap203:/dev/rdsk/c2t0d0 /dev/did/rdsk/d16
17 hap203:/dev/rdsk/c3t0d0 /dev/did/rdsk/d17
18 hap203:/dev/rdsk/c3t1d0 /dev/did/rdsk/d18
19 hap203:/dev/rdsk/c3t2d0 /dev/did/rdsk/d19
20 hap203:/dev/rdsk/c3t3d0 /dev/did/rdsk/d20
hap203> May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@8,0 (sd53):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 61 Error Block: 61
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG6Y
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 8 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@8,0 (sd53):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 61 Error Block: 61
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG6Y
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 8 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@8,0 (sd53):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 61 Error Block: 61
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG6Y
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 8 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@8,0 (sd53):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 61 Error Block: 61
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG6Y
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 8 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@8,0 (sd53):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 61 Error Block: 61
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG6Y
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 8 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@8,0 (sd53):
May 6 15:05:58 hap203 Error for Command: write Error Level: Fatal
May 6 15:05:58 hap203 scsi: Requested Block: 61 Error Block: 61
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG6Y
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 8 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 63 Error Block: 63
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 66 Error Block: 66
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 66 Error Block: 66
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 66 Error Block: 66
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 66 Error Block: 66
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 66 Error Block: 66
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Fatal
May 6 15:05:58 hap203 scsi: Requested Block: 66 Error Block: 66
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 1097 Error Block: 1097
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 1100 Error Block: 1100
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 1100 Error Block: 1100
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 1100 Error Block: 1100
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (scsi parity error), ASCQ: 0x0, FRU: 0x0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5 (qus1):
May 6 15:05:58 hap203 Target synch. rate reduced. tgt 12 lun 0
May 6 15:05:58 hap203 scsi: WARNING: /pci@1c,600000/pci@1/scsi@5/sd@c,0 (sd57):
May 6 15:05:58 hap203 Error for Command: write Error Level: Retryable
May 6 15:05:58 hap203 scsi: Requested Block: 1100 Error Block: 1100
May 6 15:05:58 hap203 scsi: Vendor: FUJITSU Serial Number: 0444Q0GG2L
May 6 15:05:58 hap203 scsi: Sense Key: Aborted Command
May 6 15:05:58 hap203 scsi: ASC: 0x47 (s

First question is what HBA and driver combination are you using?
Next do you have MPxIO enabled or disabled?
Are you using SAN switches? If so whose, what F/W level and what configuration, (ie. single switch, cascade of multiple switches, etc.)
What are the distances from nodes to storage (include any fabric switches and ISL's if multiple switches) and what media are you using as a transport, (copper, fibre {single mode, multi-mode})?
What is the configuration of your storage ports, (fabric point to point, loop, etc.)? If loop what are the ALPA's for each connection?
The more you leave out of your question the harder it is to offer suggestions.
Feadshipman

Similar Messages

Problem with sun outlook connector, Microsoft LDAP services

Dear All
I have big problem with sun outlook connector and I can find any way to fix the problem,
I am using sun java system connector deployment to create installation script for my clients.
in the tool I have specify the location of Microsoft LDAP services, I am using outlook 2003 and sun say this option is not needed for outlook 2003, if I try to create the script and run the script on target client I will receive below error,
I tried the office CD-ROM as path for LDAP services but the outlook connector says there is no LDAP services on the CD and I receive same error,
19:02:29 [5365] Outlook version is 11.0.5608.0.
19:02:29 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
19:02:29 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
19:02:31 [5362] Checking Windows version.
19:02:31 [5363] Windows version is 5.1.
19:02:31 [5364] Checking Outlook version.
19:02:31 [5509] Checking default mail client.
19:02:31 [5508] Default mail client is 'Microsoft Outlook'.
19:02:31 [5178] Verifying that Outlook is not running.
19:02:31 [5179] Trying to login to shared session.
19:02:31 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
19:02:32 [5502] Upgrading the Sun Java System MAPI Service Providers.
19:02:40 [5370] Finished installing Sun Java System MAPI Service Providers.
19:02:40 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
19:02:40 [5367] Sun Java System MAPI Service Providers are installed.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:41 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
Best regards
Mo

This is likely to depend on the version of the OC you have. The released one isn't supposed to work with Outlook 2003. Please contact Tech Support for the latest version and help.

Problem with Sun Outlook connector Microsoft LDAP Directory MAPI Service Pr

Dear All
I have big problem with sun outlook connector and I can find any way to fix the problem,
I am using sun java system connector deployment to create installation script for my clients.
in the tool I have specify the location of Microsoft LDAP services, I am using outlook 2003 and sun say this option is not needed for outlook 2003, if I try to create the script and run the script on target client I will receive below error,
I tried the office CD-ROM as path for LDAP services but the outlook connector says there is no LDAP services on the CD and I receive same error,
19:02:29 [5365] Outlook version is 11.0.5608.0.
19:02:29 [5376] Adding MAPI directory 'C:\Program Files\Common Files\System\MAPI\1033' to PATH.
19:02:29 [5475] TMP directory is 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp'.
19:02:31 [5362] Checking Windows version.
19:02:31 [5363] Windows version is 5.1.
19:02:31 [5364] Checking Outlook version.
19:02:31 [5509] Checking default mail client.
19:02:31 [5508] Default mail client is 'Microsoft Outlook'.
19:02:31 [5178] Verifying that Outlook is not running.
19:02:31 [5179] Trying to login to shared session.
19:02:31 [5369] Installing Sun Java System MAPI Service Providers using 'C:\DOCUME~1\MMESKA~1\LOCALS~1\Temp\Sun Outlook Connector\sunone-mapi-services.msi'.
19:02:32 [5502] Upgrading the Sun Java System MAPI Service Providers.
19:02:40 [5370] Finished installing Sun Java System MAPI Service Providers.
19:02:40 [5366] Checking whether Sun Java System MAPI Service Providers are installed.
19:02:40 [5367] Sun Java System MAPI Service Providers are installed.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:40 [5416] Checking whether Microsoft LDAP Directory MAPI Service Provider is installed.
19:02:40 [5418] The Microsoft LDAP Directory MAPI Service Provider is not installed:
19:02:40 File 'C:\Program Files\Common Files\System\MAPI\1033\EMABLT32.DLL' does not exist.
19:02:41 ERROR: Microsoft LDAP Directory MAPI Service Provider must first be installed.
Best regards
Mo

Hi,
Have a look at:
http://forum.java.sun.com/thread.jspa?messageID=9320116
Directions on the installation/configuration and requirements of the outlook connector (for 2005Q4 since you haven't told us what version of the comm suite you are using) are available at docs.sun.com e.g.
http://docs.sun.com/app/docs/prod/2783#hic
Outlook connector requires that you have UWC (a.k.a communication express) installed and configured, which has it's own requirements. UWC provides the single web-interface to mail & calendar & address-book. Outlook uses the address-book functionality via UWC, IMAP and SMTP for messaging/email, plus WCAP for calendar.
Regards,
Shane.

Is oracle 9.2.0.8 compatible with Sun Cluster 3.3 5/11 and 3.3 3/13?

Is oracle 9.2.0.8 compatible with Sun Cluster 3.3 5/11 and 3.3 3/13?
Where can I check compatibility matrix?

matthew_morris wrote:
This forum is about Oracle professional certifications (i.e. "Oracle Database 12c Administrator Certified Professional"), not about certifying product compatibility.
I concur with Matthew. The release notes for sun cluster and oracle for solaris might tell you. oracle 9.2.0.8 is out of support on solaris and I recall needing a number of patches to get it to a fit state ... and that is without considering sun cluster. Extended support for 9.2.0.8 ended about 4 years ago ... this is not a combination I would currently be touching with a bargepole! You are best to seek on MOS.

Problem with sun app server startup

hi,
i am getting problem with sun app server default start.the error is::
[#|2006-03-01T13:54:35.121+0530|WARNING|sun-appserver-pe8.2|javax.enterprise.tools.launcher|_ThreadID=10;|LAUNCHER005:Spaces in your PATH have been detected. The PATH must be consistently formated (e.g. C:\Program Files\Java\jdk1.5.0\bin; ) or the Appserver may not be able to start and/or stop. Mixed quoted spaces in your PATH can cause problems, so the launcher will remove all double quotes before invoking the process. The most reliable solution would be to remove all spaces from your path before starting the Appservers components. |#]
now i am useing Win Xp operating system,
show me a solution.
Regs..
Narasimha

You haven;t specified the exceptions you r getting ........while starting your default server.
if u r getting exception about InetClass then connect your system with LAN/Internet then your problem will be solved becoz i m using same location address as you specified, space doesn't matter at all - i think so, it is running fine........

Bizzare Disk reservation probelm with sun cluster 3.2 - solaris 10 X 4600

We have a 4 node X4600 sun cluster with shared AMS500 storage. There over 30 LUN's presented to the cluster.
When any of the two higher nodes ( ie node id 2 and node is 3 ) are booted, their keys are not added to 4 out of 30 LUNS. These 4 LUNs show up as drive type unknown in format. I've noticed that the only thing common with these LUN's is that their size is bigger than 1TB
To resolve this I simply scrub the keys, run sgdevs than they showup as normal in format and all nodes keys are present on the LUNS.
Has anybody come across this behaviour.
Commands used to resolve problem
1. check keys #/usr/cluster/lib/sc/scsi -c inkeys -d devicename
2. scrub keys #/usr/cluster/lib/sc/scsi -c scrub -d devicename
3. #sgdevs
4. check keys #/usr/cluster/lib/sc/scsi -c inkeys -d devicename
all node's keys are now present on the lun

Hi,
according to http://www.sun.com/software/cluster/osp/emc_clarion_interop.xml you can use both.
So at the end it all boils down to
- cost: Solaris multipathing is free, as it is bundled
- support: Sun can offer better support for the Sun software
You can try to browse this forum to see what others have experienced with Powerpath. From a pure "use as much integrated software as possible" I would go with the Solaris drivers.
Hartmut

JMS problem with Sun Application Server 8.2

Hi!
I've just started trying JMS and found a problem.
I set a connection factory called "QueueConnectionFactory" in the Sun Application Server Admin Consol.
After this I test this code:
import javax.jms.*;
import javax.naming.*;
public class Sun_JNDI
public static void main(String args[]) throws Exception
Context jndiContext = null;
System.setProperty("java.naming.factory.initial","com.sun.enterprise.naming.SerialInitContextFactory" );
System.setProperty("java.naming.factory.url.pkgs","=com.sun.enterprise.naming");
System.setProperty("java.naming.provider.url","localhost:1024");
jndiContext = new InitialContext();
Object O = jndiContext.lookup("QueueConnectionFactory");
System.out.println(jndiContext);
in result I got this long Exception message:
2006.02.12. 10:52:59 com.sun.corba.ee.spi.logging.LogWrapperBase doLog
INFO: "IOP00710299: (INTERNAL) Successfully created IIOP listener on the specified host/port: all interfaces/1356"
2006.02.12. 10:53:00 com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter
SEVERE: RAR6001 : Class Not found : com.sun.messaging.jms.ra.ResourceAdapter
2006.02.12. 10:53:00 com.sun.enterprise.connectors.ActiveRAFactory createActiveResourceAdapter
SEVERE:
com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
2006.02.12. 10:53:00 com.sun.enterprise.naming.SerialContext lookup
SEVERE: NAM0004: Exception during name lookup : {0}
com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
Exception in thread "main" javax.naming.CommunicationException: serial context communication ex [Root exception is com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR]
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:317)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at Sun_JNDI.main(Sun_JNDI.java:40)
Caused by: com.sun.enterprise.connectors.ConnectorRuntimeException: Error in creating active RAR
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:76)
at com.sun.enterprise.connectors.ResourceAdapterAdminServiceImpl.createActiveResourceAdapter(ResourceAdapterAdminServiceImpl.java:267)
at com.sun.enterprise.connectors.ConnectorRuntime.createActiveResourceAdapter(ConnectorRuntime.java:189)
at com.sun.enterprise.naming.factory.ConnectorObjectFactory.getObjectInstance(ConnectorObjectFactory.java:71)
at javax.naming.spi.NamingManager.getObjectInstance(NamingManager.java:304)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:293)
... 2 more
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jms.ra.ResourceAdapter
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.connectors.ActiveRAFactory.createActiveResourceAdapter(ActiveRAFactory.java:50)
... 7 more
So I tested this code under Netbeans5 and I don't where to find jar file contains the class: com.sun.messaging.jms.ra.ResourceAdapter
Other time I tryied to lookup this URL: "java:comp/env/jms/QueueConnectionFactory"
The result was: javax.naming.NameNotFoundException
I know it is a small code example but if I'm not able to solve this problem I can't go on with JMS.
I would be glad by any help.
Regards:
Sandor

Hello
In my code it looks like that:
1: System.setProperty("com.sun.jndi.ldap.LdapCtxFactory", "iiop://localhost:3700");
2: Context ctx = new InitialContext();
3: TopicConnectionFactory factory = (TopicConnectionFactory)ctx.lookup("jms/DailyDestinationFactory");
4: TopicConnection connection = factory.createTopicConnection();
5: TopicSession session = connection.createTopicSession(false, Session.AUTO_ACKNOWLEDGE);
6: Topic topic = (Topic)ctx.lookup("jms/DailyBean");
7: TopicPublisher pub = session.createPublisher(topic);
8: TextMessage msg = session.createTextMessage();
9: msg.setText("NewMessage");
10: pub.send(msg);
and it work with Sun App Server 8.2.

Problems with sun update connection server ?

recently I've been having problems with accessing the update connection web server.
Can't get in with Firefox sometimes - get blank pages, or 401 error pages.
Then today with IE, hitting the help page on the top right, I get:
Sun ONE Application Server - HTTP Status 500 Error
The server encountered an internal error (Internal Server Error) that prevented it from fulfilling this request.
Type: Exception Report
Message: Internal Server Error
Exception
java.lang.RuntimeException: The icon attribute of an Icon component was set to MASTHEAD_MINI_IMAGE. The Theme does not contain an image of that name.
     at com.sun.web.ui.theme.Theme.getIcon(Theme.java:534)
     at com.sun.web.ui.renderer.SucPopupMastheadRenderer.renderEnd(SucPopupMastheadRenderer.java:114)
     at com.sun.web.ui.renderer.AbstractRenderer.encodeEnd(AbstractRenderer.java:235)
     at javax.faces.component.UIComponentBase.encodeEnd(UIComponentBase.java:720)
     at javax.faces.webapp.UIComponentTag.encodeEnd(UIComponentTag.java:623)
...

The URL is correct and it works for us no problem. I don't believe anyone else has reported this problem so I guess it must be working for everyone else as well.
Can you detail exactly what error you get, and what browser type/version you are using.
Can you also see if you can access this URL: https://srsnetconnect3.sun.com

Upgrade from Solaris 8 SPARC with Sun cluster 3.1u3 to Solaris 10 SPARC

Dear All,
We are planning an upgrade of the OS from Solaris 8 SPARC to Solaris 10 SPARC on a two-node active-standby clustered system.
The current major software we have on the Solaris 8 system are:
1: Sun Cluster 3.1u3
2: Oracle 9i 9.2.0.8
3: Veritas File System Vxfs v4.0
4: Sun Solaris 8 2/04 SPARC
Any pointers as to what sequence and how the upgrade should be done?
Thanks in advance.
Regards,
Ray

yes I know it can be quite complicated and complex, but Sun provided us with a detailed documentation, at least in our case Solaris 9 to 10 it was very helpful.
You might get better help in the cluster forum http://forums.sun.com/forum.jspa?forumID=842
-- Nick

SAP Netweaver 7.0 Web Dispatcher HA Setup with Sun Cluster 3.2

Hi,
How to HA SAP web dispatcher, which is not mentioned in the guide 'Sun Cluster Data Service for SAP Web Application Server Guide for Solaris OS'.
Since I do not want to install central instance within the cluster, should I install two standalone web dispatcers within the two nodes, and then HA it? Or maybe just install it on the shared storage with CFS once?
And specifically, what kind of resource type should I use for it? SUNW.sapwebas?
Thanks in advance,
Stephen

Hi all.
I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
Scenrio:
Central Instance (not incluster) : Started on one node
Dialog Instance (not in cluster): Started on the other node
When I create the resource for SUNW.sap_as like
clrs create --g sap-rg -t SUNW.sap_as .....etc etc
in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
Then after timeout it gives up.
Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
TIA

JNDI problem with Sun Application Server

I am trying to call a extremely simple EJB from a remote computer. But everytime I run the client I get a Class castException. I have used Weblogic and Jboss in the past and I never had any problem with JNDI. I included all the files except for the descriptor. Please help, this is driving me nut.
Here is the exception i get:
java.lang.ClassCastException
at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:293)
at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:134)
at clients.testEjbTest.main(testEjbTest.java:42)
The remote Interface :
package ejb.test;
import javax.ejb.*;
public interface Test extends javax.ejb.EJBObject{
public String getResult() throws java.rmi.RemoteException;
The Home interface is:
package ejb.test;
import javax.ejb.*;
public interface TestHome extends javax.ejb.EJBHome{
public Test create() throws java.rmi.RemoteException, CreateException;
The Bean is:
package ejb.test;
import javax.ejb.*;
public class TestBean implements javax.ejb.SessionBean {
public TestBean() {}
public String getResult() { return "hello";}
public void ejbActivate() { }
public void ejbPassivate() { }
public void ejbRemove() { }
public void ejbCreate() throws CreateException { }
public void setSessionContext(javax.ejb.SessionContext sessionContext) { }
The client is:
public class testEjbTest {
public testEjbTest() { }
public static void main(String[] args) {
try{
Properties env = new Properties();
env.setProperty("java.naming.factory.initial", "com.sun.jndi.cosnaming.CNCtxFactory" );
env.setProperty("java.naming.provider.url", "iiop://192.168.0.102:3700");
InitialContext ic = new InitialContext(env);
Object objref = ic.lookup("TestBean");
Object tt = PortableRemoteObject.narrow(objref, ejb.test.TestHome.class);
}catch(Exception e){e.printStackTrace();}

Hi,
I am new to this Forum.
I have an application running on Weblogic.
I want to shift to using SunOne as the Webserver and weblogic as application server.
But when I deploy the application I am getting this ClassCastException
at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow.
java.lang.ClassCastException
     at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:293)
     at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:134)
     at com.elsevier.portal.admin.web.proxy.LoginProxy.getLoginSession(LoginProxy.java:156)
     at com.elsevier.portal.admin.web.proxy.LoginProxy.authenticateUser(LoginProxy.java:48)
    at com.elsevier.portal.admin.web.actions.LoginAction.login(LoginActi
on.java:201)
     at com.elsevier.portal.admin.web.actions.LoginAction.execute(LoginAction.java:80)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
     at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
     at org.apache.struts.action.ActionServlet.process(ActionServlet.java
:1482)
      at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:
525)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:807)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletServic
e(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
warning: CORE3283: stderr: at org.apache.catalina.core.StandardHostValve.invoke(StandardHostVal
ve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)The code snippet is as follows�.
protected LoginSession getLoginSession() throws ApplicationException {
LoginSessionHome home = null;
LoginSession object = null;
try {
home = (LoginSessionHome) (PortableRemoteObject.narrow(ProxyUtil.getEJBHome(getProperties().getProperty(DataCoreConstants.LOGIN_JNDI_NAME),getProperties()),LoginSessionHome.class));
object = home.create();
catch(ClassCastException cse){
cse.printStackTrace();
logger.error("Class Cast Exception is thrown while casting the Object to                      LoginSessionHome");
logger.error(cse);
throw new ApplicationException(ExceptionConstants.CLASS_CAST_EXCEPTION);
return object;
}Same method is running on weblogic without any problem�
Help needed urgently.
Regards,
Neha.

Failover Zones / Containers with Sun Cluster Geographic Edition and AVS

Hi everyone,
Is the following solution supported/certified by Oracle/Sun? I did find some docs saying it is but cannot find concrete technical information yet...
* Two sites with a 2-node cluster in each site
* 2x Failover containers/zones that are part of the two protection groups (1x group for SAP, other group for 3rd party application)
* Sun Cluster 3.2 and Geographic Edition 3.2 with Availability Suite for SYNC/ASYNC replication over TCP/IP between the two sites
The Zones and their application need to be able to failover between the two sites.
Thanks!
Wim Olivier

Fritz,
Obviously, my colleagues and I, in the Geo Cluster group build and test Geo clusters all the time :-)
We have certainly built and tested Oracle (non-RAC) configurations on AVS. One issue you do have, unfortunately, is that of zones plus AVS (see my Blueprint for more details http://wikis.sun.com/display/BluePrints/Using+Solaris+Cluster+and+Sun+Cluster+Geographic+Edition). Consequently, you can't built the configuration you described. The alternative is to sacrifice zones for now and wait for the fixes to RG affinities (no idea on the schedule for this feature) or find another way to do this - probably hand crafted.
If you follow the OHAC pages (http://www.opensolaris.org/os/community/ha-clusters/) and look at the endorsed projects you'll see that there is a Script Based Plug-in on the way (for OHACGE) that I'm writing. So, if you are interested in playing with OHACGE source or the SCXGE binaries, you might see that appear at some point. Of course, these aren't supported solutions though.
Regards,
Tim
---

Problems with sun studio 12 in suse linux 11

Hi.
I installed Sun Studio 12 suse linux with no problems. However, the debugging modules (DBX) are not working any more. When I started Sun Studio, it gave a message about modules that could not be loaded in tha moment. I did not pay attention. But I noticed that all debugging options were disabled.
Using the module manager, I saw the DBX module was not checked, and I could not change it. I was marked with a red X. So I thought to reinstall the application. However, the uninstall utility doesn't work either.
According with the documentation, running ./uninstaller does it, but I get the following error message instead
Exception in thread "main" java.lang.NoClassDefFoundError: uninstall_Sun_Studio_12/class
Caused by: java.lang.ClassNotFoundException: uninstall_Sun_Studio_12.class
at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
I tried to uninstall manually, and then execute installer, by using first the software manager in linux and deleting the producregistry file manually. It worked because I executed the installer. However, in Sun Studio IDE, debugging options are still not available despite I "reinstalled" the application. I checked the log files and they say the file uninstall_Sun_Studio_12.class could not be written.
So my questions are:
1. Is there any other way to repair Sun Studio? What could be the possible for this module to stop working?
2. Does anyone have an idea of why the installer cannot write the uninstaller class?
I found that perhaps problems regarding Java / Netbeans versions could be the problem, but the ones I have installed are those packages that were installed along with Sun Studio, and both are valid.
Thank you very much.

Perhaps you can simply delete the Sun Studio 12 installation tree, because it will not work on SUSE Linux 11.
This OS is not supported, so any problems you see with SS12 on SUSE 11 will not be fixed.
But we have a newer version, that should work better.
You can try to download and install Sun Studio Express 2008/11 (extract pre-installed image from tar.bz2 file).
Here is a pointer to the web page:
http://developers.sun.com/sunstudio/downloads/express
All you need is to provide a email address, and press "Download Now" button.
You will see a page, that gives you 2 options to download Sun Studio Express 2008/11.
Use "Option 2": Download Tarfile Installer
Thanks,
Nik

Deploy HA Zones with Sun Cluster

Hi
I have 2 physical Sol 10 Servers with a storedge array for the shared storage.
I have installed Sun Cluster 3.3 on both nodes and sorted the quorum and shared drive using a zfs file system for a mount point
Next i have installed a non global zone on 1 node using the zone path on the shared filesystem
When i switch the shared file system the zone is not instaalled on the 2nd node.
So when i try to install the zone on the 2nd node
i get a Rootpath is already mounted on this filesystem
Does anyone know how to setup a Sun Cluster with HA Zones please.

The option to forcibly attach a zone got added to zoneadm with a Solarus 10 Update release. With that option the procedure to configure and install a zone for HA Container use can be:
The assumption is there is already a RG configured with a HASP resource managing the zpool for the zone rootpath:
a) Swithch the RG online on node A
b) Configure (zonecfg) and install (zoneadm) the zone on node A on shared storage
c) boot the zone and go through interactive sysidcfg within "zlogic -C zonename"
d) Switch the RG hosting the HASP resource for the pool to node B
e) Configure (zonecfg) the zone on node B.
f) "Install" the zone by forcibly attaching it: zoneadm -z <zonename> attach -F
The user can then test if the zone boots on node B, halt it and proceed with the sczbt resource registration as described within http://download.oracle.com/docs/cd/E18728_01/html/821-2677/index.html.
Regards
Thorsten

There is a copy/paste problem with SUN JRE in the application.

Hi All,
The application is desinged and developed in Lotus Notes and contains a Rich Text field , its a web based application and loads with SUN JRE for the applet to gets load in the application. Whenever i tries to do copy/paste from Microsoft word document to rich text field in the application i get a text which is parsed with html tags which doesn't come while i loads MS JVM on the browser.
I tried with SUN JRE 1.5 and 1.6 version , i got the parsingproblem ie text mixed with html and xml tags.
Any help is appreciated!!.
Thanks
Muktesh.

Hi,
When we right-click a word that is marked with red or blue underline, it will pop up the suggested corrections context menu. It can give you other options, such as adding the word to your custom dictionary depending on the Microsoft Office program that you
are using.
If you want to copy such words, you can use Ctrl + C and Ctrl + V to achieve the goal. Or, we can right-click the word and then select
Ignore All or Add to Dictionary, and then you can copy the word by right-clicking it.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Problem with sun Cluster

Similar Messages

Maybe you are looking for