Problem with textBox border

Hi All,
I am trying to simulate a grid line table with 4 column and as much as row in database. So i had 4 textboxes with border but when doing so i run in to the below problem
When even one of the 4 TextBox has a bigger content to display the height of that textBox alone increasing leaving the other textBox hanging above.
Is there a way to increase the height of all the TextBoxes in the Row to the textBox which has the maximum height. Previously i was using IReport where i had such option but in crystal i couldnt find.I dont beleive that if Crystal doesnt have such an option.
SomeBody please tell me how to do that?
Thanks,
Prem

Try to place the text boxes in a single box by inserting a box and separate them by inserting vertical lines. If the data is in details section then insert one more section below as details b and extend the box height and lines height to details section b and fit the details section b.
Now the box height will vary according to the text length whch means the section height will also vary accordingly. So the complete box height will be the same for all texts.
I Hope it helps !
Raghavendra

Similar Messages

Problem with textboxes in Flash CS5

Hi, I am currently a Flash CS4 user and am trying Flash CS5 currently to see if it is worth it to pay for the upgrade. I currently have a problem with the use of textboxes in CS5 comparing with the previous version. When I try to change the texts of a text box using the following command in actionscript:
showlmytext.text = "My string: " +String(somevariable);
I would get weird misaligned text outputted in my textbox, which exact same code did not cause this problem on Flash CS4.
Can somebody please tell me what is the problem and how can I fix it?
Thanks

Hi Mario,
I hope you are well. My name is Sandi Langlotz.
At my job at greenidea.com, here in SF; I am having difficulty with using Hebrew in the trial download of CS5 Flash. Russ Mumford my boss has also contacted you regarding our problem.
Flash has a new TLF (Text Layout Format tool). My difficulty has to do with text boxes that are formatted for Right to Left text, with Hebrew selected as the Locale. We are pasting from Microsoft Word.
I hope that you may have a suggestion, a referral or a possible work around for me to try.
I have tried Adobe Customer Service several times to no avail.
Problem 1.
The first sentence below, (in blue) is correct format for Hebrew. Hebrew reads from R to Left.
When I paste the Hebrew text into the Flash animation, one of two things can happen;
the punctuation is cut off of the left side completely; or it is pasted in to the Right side of the Text box, (at the wrong end of the sentence).
I have tried to click the cursor into the left in order to insert the punctuation mark; this works sometimes but often I am unable to click in to manually correct the problem. I don't understand why it is cutting it off, or why I am sometimes unable to click into the left side and insert the punctuation.
Problem 2
In the second paste (the 2nd bold sentence), .CSO on the left side of the sentence is correct, as is the rest of the sentence.
When I paste the text into Flash from Word, Flash puts it in as reversed order. the word CSO. has the punctuation switched to the right (CSO.) Flash reverses the order of the other characters in the sentence also (like in the 2nd black sentence).
שולחן נקי הוא שולחן מאובטח.
שולחן נקי הוא שולחן מאובטח
מבוסס על רעיון ממגזיןCSO .
.CSOןיזגממ ןויער לע ססובמ
Adobe says it supports Right to Left text, but I can find no info on these two buggy problems. Do you have any idea what is wrong?
Thank you ahead of time for any info or referrals you may suggest.
Sandi Langlotz
שולחן נקי הוא שולחן מאובטח.
שולחן נקי הוא שולחן מאובטח
מבוסס על רעיון ממגזיןCSO .
.CSOןיזגממ ןויער לע ססובמ

Problem with focus border and ListCellRenderer in custom listbox

I have a bug in some code that I adapted from another posting on this board -- basically what I've done is I have a class that implements a custom "key/value" mapping listbox in which each list item/cell is actually a JPanel consisting of 3 JLabels: the first label is the "key", the second is a fixed "==>" mapping string, and the 3rd is the value to which "key" is mapped.
The code works fine as long as the list cell doesn't have the focus. When it does, it draws a border rectangle to indicate focus, but if the listbox needs to scroll horizontally to display all the text, part of the text gets cut off (i.e. "sometex..." where "sometext" should be displayed).
The ListCellRenderer creates a Gridlayout to lay out the 3 labels in the cell's JPanel.
What can I do to remedy this situation? I'm not sure what I'd need to do in terms of setting the size of the panel so that all the text gets displayed OK within the listbox. Or if there's something else I can do to fix this. The code and a main() to run the code are provided below. To reproduce the problem, click the Add Left and Add Right buttons to add a "mapping" -- when it doesn't have focus, everything displays fine, but when you give it focus, note the text on the right label gets cut off.
//======================================================================
// Begin Source Listing
//======================================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.util.Collection;
import java.util.Iterator;
import java.util.Vector;
import java.util.Enumeration;
public class TwoColumnListbox extends JPanel
private JList m_list;
private JScrollPane m_Pane;
public TwoColumnListbox(Collection c)
     DataMapListModel model = new DataMapListModel();
     if (c != null)
     Iterator it = c.iterator();
     while (it.hasNext())
     model.addElement(it.next());
     m_list = new JList(model);
     ListBoxRenderer renderer= new ListBoxRenderer();
          m_list.setCellRenderer(renderer);
          setLayout(new BorderLayout());
          m_list.setVisibleRowCount(4);
          m_Pane = new JScrollPane(m_list);
          add(m_Pane, BorderLayout.NORTH);
public JList getList()
return m_list;
public JScrollPane getScrollPane()
return m_Pane;
public static void main(String s[])
          JFrame frame = new JFrame("TwoColumnListbox");
          frame.addWindowListener(new WindowAdapter() {
          public void windowClosing(WindowEvent e) {System.exit(0);}
final DataMappings dm = new DataMappings();
final TwoColumnListbox lb = new TwoColumnListbox(dm.getMappings());
          final DataMap map = new DataMap();
          JButton leftAddBtn = new JButton("Add Left");
          leftAddBtn.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent e)
          map.setSource("JButton1");
          DefaultListModel model = new DefaultListModel();
          model.addElement(map);
          lb.getList().setModel(model);
          JButton leftRemoveBtn = new JButton("Remove Left");
          leftRemoveBtn.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent e)
          map.setSource("");
          DefaultListModel model = new DefaultListModel();
          model.addElement(map);
          lb.getList().setModel(model);
          JButton rightAddBtn = new JButton("Add Right");
rightAddBtn.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent e)
          map.setDestination("/getQuote/symbol[]");
          DefaultListModel model = new DefaultListModel();
          model.addElement(map);
          lb.getList().setModel(model);
          JButton rightRemoveBtn = new JButton("Remove Right");
rightRemoveBtn.addActionListener(new ActionListener() {
          public void actionPerformed(ActionEvent e)
          map.setDestination("");
          DefaultListModel model = new DefaultListModel();
          model.addElement(map);
          lb.getList().setModel(model);
          JPanel leftPanel = new JPanel(new BorderLayout());
          leftPanel.add(leftAddBtn, BorderLayout.NORTH);
          leftPanel.add(leftRemoveBtn, BorderLayout.SOUTH);
JPanel rightPanel = new JPanel(new BorderLayout());
          rightPanel.add(rightAddBtn, BorderLayout.NORTH);
          rightPanel.add(rightRemoveBtn, BorderLayout.SOUTH);
frame.getContentPane().add(leftPanel, BorderLayout.WEST);
          frame.getContentPane().add(lb,BorderLayout.CENTER);
frame.getContentPane().add(rightPanel, BorderLayout.EAST);
          frame.pack();
          frame.setVisible(true);
     class ListBoxRenderer extends JPanel implements ListCellRenderer
          private JLabel left;
          private JLabel arrow;
          private JLabel right;
          private Color clrForeground = UIManager.getColor("List.foreground");
private Color clrBackground = UIManager.getColor("List.background");
private Color clrSelectionForeground = UIManager.getColor("List.selectionForeground");
private Color clrSelectionBackground = UIManager.getColor("List.selection.Background");
          public ListBoxRenderer()
               setLayout(new GridLayout(1, 2, 10, 0));
               //setBorder(BorderFactory.createEmptyBorder(4, 4, 4, 4));
               left = new JLabel("");
               left.setForeground(clrForeground);
               arrow = new JLabel("");
               arrow.setHorizontalAlignment(SwingConstants.CENTER);
               arrow.setForeground(clrForeground);
               right = new JLabel("");
               right.setHorizontalAlignment(SwingConstants.RIGHT);
               right.setForeground(clrForeground);
               add(left);
               add(arrow);
               add(right);
          public Component getListCellRendererComponent(JList list, Object value,
                    int index, boolean isSelected, boolean cellHasFocus)
               if (isSelected)
                    setBackground(list.getSelectionBackground());
                    setForeground(list.getSelectionForeground());
                    left.setForeground(clrSelectionForeground);
                    arrow.setForeground(clrSelectionForeground);
                    right.setForeground(clrSelectionForeground);
               else
                    setBackground(list.getBackground());
                    setForeground(list.getForeground());
               left.setForeground(clrForeground);
                    arrow.setForeground(clrForeground);
                    right.setForeground(clrForeground);
               // draw focus rectangle if control has focus. Problem with focus
// and cut off text!!
               if (cellHasFocus)
               // FIXME: for Windows LAF I'm not getting the correct thing here for some reason.
               // Looks OK on Metal though.
               setBorder(BorderFactory.createLineBorder(UIManager.getColor("focusCellHighlightBorder")));
               else
               setBorder(BorderFactory.createEmptyBorder());
DataMap map = (DataMap) value;
               String displaySource = map.getSource();
               String displayDest = map.getDestination();
               left.setText(displaySource);
               arrow.setText("=>to<=");
               right.setText(displayDest);
               return this;
/** Interface for macro editor UI
* @version 1.0
class DataMappings
private Collection mappings;
public DataMappings()
setMappings(new Vector(0));
public DataMappings(Collection maps)
setMappings(maps);
/** gets mapping value of a specified source object
* @param src -- the "key" or source object, what is mapped.
* @return what the source object is mapped to
* @version 1.0
public Object getValue(String src)
if (src != null)
Iterator it = mappings.iterator();
while (it.hasNext());
DataMap thisMap = (DataMap) it.next();
if (thisMap.getSource().equals(src))
return thisMap.getDestination();
return null;
/** sets mapping value of a specified source object
* @param src -- the "key" or source object, what is mapped.
* @param what the source object is to be mapped to
* @version 1.0
public void setValue(String src, String dest)
if (src != null)
// see if the value is in there first.
Iterator it = mappings.iterator();
while (it.hasNext())
DataMap thisMap = (DataMap) it.next();
if (thisMap.getSource().equals(src))
thisMap.setDestination(dest);
return;
// not in the collection, add it
mappings.add(new DataMap(src, dest));
/** gets collection of mappings
* @return a collection of all mappings in this object.
* @version 1.0
public Collection getMappings()
return mappings;
/** sets collection of mappings
* @param maps a collection of src to destination mappings.
* @version 1.0
public void setMappings(Collection maps)
mappings = maps;
/** adds a DataMap
* @param map a DataMap to add to the mappings
* @version 1.0
public void add(DataMap map)
if (map != null)
mappings.add(map);
class DataMap
public DataMap() {}
public DataMap(String source, String destination)
m_source = source;
m_destination = destination;
public String getSource()
return m_source;
public void setSource(String s)
m_source = s;
public String getDestination()
return m_destination;
public void setDestination(String s)
m_destination = s;
protected String m_source = null;
protected String m_destination = null;
/** list model for datamaps that provides ways
* to determine whether a source is already mapped or
* a destination is already mapped.
class DataMapListModel extends DefaultListModel
public DataMapListModel()
super();
/** determines whether a source is already mapped
* @param src -- the source property of a datamapping
* @return true if the source is in the list, false if not
public boolean containsSource(Object src)
Enumeration enum = elements();
while (enum.hasMoreElements())
DataMap dm = (DataMap) enum.nextElement();
if (dm.getSource().equals(src))
return true;
return false;
/** determines whether a destination is already mapped
* @param dest -- the destination property of a datamapping
* @return true if the destination is in the list, false if not
public boolean containsDest(Object dest)
Enumeration enum = elements();
while (enum.hasMoreElements())
DataMap dm = (DataMap) enum.nextElement();
if (dm.getDestination().equals(dest))
return true;
return false;
public DataMappings getDataMaps()
DataMappings maps = new DataMappings();
// add all the datamaps in the model
Enumeration enum = elements();
while (enum.hasMoreElements())
DataMap dm = (DataMap) enum.nextElement();
maps.add(dm);
return maps;
//======================================================================
// End of Source Listing
//======================================================================

I did not read the program, but the chopping looks like a layout problem.
I think it's heavy to use a panel + 3 components in a gridlayout for each cell. look at this sample where i draw the Cell myself,
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.util.*;
public class Jlist3 extends JFrame
     Vector      v = new Vector();
     JList       jc = new JList(v);
     JScrollPane js = new JScrollPane(jc);
public Jlist3()
     addWindowListener(new WindowAdapter()
    {     public void windowClosing(WindowEvent ev)
          {     dispose();
               System.exit(0);}});
     for (int j=0; j < 70; j++)     v.add(""+j*1000+"a d"+j);
     setBounds(1,1,400,310);
     getContentPane().add(js);
     js.setPreferredSize(new Dimension(230,259));
     jc.setSelectedIndex(1);
     jc.setCellRenderer(new MyCellRenderer());
     getContentPane().setLayout(new FlowLayout());
     setVisible(true);
public class MyCellRenderer extends JLabel implements ListCellRenderer
     String txt;
     int     idx;
     boolean sel;
public Component getListCellRendererComponent(JList list,
                         Object value,           // value to display
                         int     index,           // cell index
                         boolean isSelected,      // is the cell selected
                         boolean cellHasFocus)    // the list and the cell have the focus
     idx = index;
     txt = value.toString();
     sel = isSelected;
     setText(txt);
     return(this);
public void paintComponent(Graphics g)
     if (idx%2 == 1) g.setColor(Color.white);
          else        g.setColor(Color.lightGray);
     if (sel)        g.setColor(Color.blue);
     g.fillRect(0,0,getWidth(),getHeight());
     StringTokenizer st = new StringTokenizer(txt.trim()," ");
     g.setColor(Color.black);
     if (st.hasMoreTokens())     g.drawString(st.nextToken(),1,14);
     g.setColor(Color.red);
     g.drawString("===>",70,14);
     g.setColor(Color.black);
     if (st.hasMoreTokens())     g.drawString(st.nextToken(),110,14);
public static void main (String[] args)
     new Jlist3();
Noah
import java.awt.*;
import javax.swing.*;
import java.awt.event.*;
import java.util.*;
public class Jlist3 extends JFrame
     Vector v = new Vector();
     JList jc = new JList(v);
     JScrollPane js = new JScrollPane(jc);
public Jlist3()
     addWindowListener(new WindowAdapter()
{     public void windowClosing(WindowEvent ev)
          {     dispose();
               System.exit(0);}});
     for (int j=0; j < 70; j++)     v.add(""+j*1000+"a d"+j);
     setBounds(1,1,400,310);
     getContentPane().add(js);
     js.setPreferredSize(new Dimension(230,259));
     jc.setSelectedIndex(1);
     jc.setCellRenderer(new MyCellRenderer());
     getContentPane().setLayout(new FlowLayout());
     setVisible(true);
public class MyCellRenderer extends JLabel implements ListCellRenderer
     String txt;
     int idx;
     boolean sel;
public Component getListCellRendererComponent(JList list,
                         Object value, // value to display
                         int index, // cell index
                         boolean isSelected, // is the cell selected
                         boolean cellHasFocus) // the list and the cell have the focus
     idx = index;
     txt = value.toString();
     sel = isSelected;
     setText(txt);
     return(this);
public void paintComponent(Graphics g)
     if (idx%2 == 1) g.setColor(Color.white);
          else g.setColor(Color.lightGray);
     if (sel) g.setColor(Color.blue);
     g.fillRect(0,0,getWidth(),getHeight());
     StringTokenizer st = new StringTokenizer(txt.trim()," ");
     g.setColor(Color.black);
     if (st.hasMoreTokens())     g.drawString(st.nextToken(),1,14);
     g.setColor(Color.red);
     g.drawString("===>",70,14);
     g.setColor(Color.black);
     if (st.hasMoreTokens())     g.drawString(st.nextToken(),110,14);
public static void main (String[] args)
     new Jlist3();
}

Problem with white border around images

Hey guys,
I'm new to the creative suite and have just finished running through all of the video tutorials, etc. I'm having a small problem which can be seen in the sample site I'm fooling around with here:
http://www.andrewedunn.com/gsd/
I'd like to get rid of the small white border around the "GS" logo. It is an illustrator document.
Basically I put the letters in place, converted them to paths (so I can resize it) and dropped it in my GoLive document as a smart object.
A google such suggested rasterizing, but I couldn't get it to work after fooling with it a little bit.
Further, if I wanted to add a drop shadow to it, how can I do it so that it is transparent on top of the background images in golive? The one time I tried it, the drop shadow was placed on top of a white background.
Any suggestions would be appreciated!

Are your background images always going to be displayed left-aligned on a black background and always the same size, so that the left half of the logo will always be over the photo and the right half will always be over the black? Or will the size or placement of the photos vary?
Are all of the photographs in approximately the same moderate tonal range, or will some be bright and some dark?
If the background will be consistently as you show it, you should be able to anti-alias your logo against a medium gray on the left and black on the right for acceptable results. If the background is more varied, you are not going to get good results with either GIF or JPG format.
See this related thread:
http://www.adobeforums.com/cgi-bin/webx/.3bc38b6e/3
> Further, if I wanted to add a drop shadow to it, how can I do it so that it is transparent on top of the background images in golive?
Only by exporting as a transparent PNG, but then older browers won't display it properly.
If you are really needing to have a logo that casts transparent drop shadows on top of a wide variety of images, you might consider going the Flash route, even though you aren't planning animation. Flash has very good transparency handling, and there are Flash player plugins that are compatible with browsers that won't display PNG images.

Problem with strange border-colors on windows 2000

On windows 2000, I have the problem, that my JButtons, JComboboxes and so on are rainbow-colord (if I do not set a special Border to theser Components). What can I do (if possible, I would not set explicit borders to all Components; and for Popups-Dialogues, it is not possible to set spcial borders, is it?)
Thank you for any help!

I'm seeing the exact same behavior on my 8.1 Laptop. I tried deleting the Skype tmp folder as suggested elsewhere, I also uninstalled and reinstalled Skype for Desktop and still can't hang up a call and often can't answer a call either. Makes Skype completely useless at this point.

Problem with white border around flash

if you go to www.brokenflash.com in a firefox browser and
click on any of the three buttons in the top right, or any of the
buttons at the bottom of the page, you get a white box once you
click. It still navigates on a single click, it just shows up right
after you click. I don't seem to have the problem in IE or Google
Chrome. Can anyone tell me how to remedy this? I did a search on
the forum, and so far, I haven't found a remedy. I'm going to
continue to look through the search items, but this is my first
website, so I am still fairly new at this(just a warning in case
you planned on using highly technical jargon).

> if you go to www.brokenflash.com and click on any of the
three buttons in the
> top right, or any of the buttons at the bottom of the
page, you get a white box
> once you click. Can anyone tell me how to remedy this?
I am not sure I quite follow you. You don't -- by any chance
-- mean the
mouse over state (shown when the mouse pointer is above the
button) of
those buttons, do you? I see no white boxes having clicked on
any of the
buttons (because the site loads a different page then).
Wait -- are you using Internet Explorer to view web pages?
> This is my first
> website, so I am still fairly new at this(just a warning
in case you planned on
> using highly technical jargon).
Mentioning one's experience level within a forum posting is
usually a
good idea and helps others to help you.
Later
Christian

Spry menu problems with Internet explorer

Hi everyone
I'm having ongoing problems with my horizontal menus and
internet explorer. They work fine in other browsers and with the
generous help of others at these forums I've managed to sort out
most of the problems. But I've hit a real wall with this one. The
menus drop down showing the links OK but you cannot highlight or
click on the options that drop down, they just appear as text. Any
help would be appretiated. My appologies for posting in other
threads also but just hoping for a response.
I am very new to this side of design so simple answers would
be very helpful. Thanks
Bob

I have 2 similar problems to the prior posts:
1) I run IE7 and FF and the positioning of my submenus are
skewed in IE only.
2) I am not sure, but I believe I have a problem with my
iframe appearing in my IE7 browser behind all of my submenus. Well,
I know I have a problem with something, but whether or not it's the
iframe I don't know. What I do know is that the box shows up like a
border around my submenus and I can't get rid of it. I suspect that
it may be caused by the fact that my menu buttons are imported
gif's in the shape of rounded rectangles which allows for the
corners to be visible. I actually just thought about it and my
gif's are set to have a white index transparency, but maybe If I
export the gifs without transparency, then that issue will be
resolved. Well I will try that part and see, but any and all
suggestions are welcome. Oh and I just remembered, that problem
with the border around my submenus also has another problem with
the word "false" inside of that border behind my submenus. This
problem again is only in my IE browser, and it is hard to see it,
but I have no idea why that is there or what it's from. I ran a
search in my SpryMenuHorizontal.css page and in my html page for
the word 'false' but nothing turned up. The only document related
to this issue that contains the word 'false' is the
'SpryMenuBar.js' document.
CSS
Layout file
HTML Demo
link
Thank you,
Danny

How to solve problem with JSF table's border (style) ??

Hi, I would like to create table in JSF like this
               <table align="center"
                         width="250"
                         style="border-collapse: collapse; border: 1px black solid;" >
               <tr>
                    <td align="center"
                         colspan="2"
                         style="border: 1px black solid;">
                         Header A
                    </td>
               </tr>
               <tr>
                    <td> a1 </td>
                    <td> a2 </td>
               </tr>
               <tr>
                    <td> b1 </td>
                    <td> b2 </td>
               </tr>
               <tr>
                    <td align="center"
                         colspan="2"
                         style="border: 1px black solid;" >
                         <BUTTON value="12" > button1 </BUTTON>
                         <BUTTON value="12"> button2 </BUTTON>
                    </td>
               </tr>
               </table>I don't know how to create borders like this with JSF's components.
I know how to create table and collspan, but I have a problem with
border and style.
below is example that I creat it, but borders are not OK
IF ANYONE FIND SOLUTION I WILL BE TANKFUL
JSF:
<hx:panelBox id="box1"
           layout="pageDirection"
           bgcolor="silver"
           align="center"
           style="border: 1px red solid;"
           border="0">
          <hx:panelBox id="box2" layout="pageDirection" width="100%" bgcolor="#aec74e" height="100%" align="center" style="border: 1px black solid;">
               <center>
                    <h:outputText styleClass="outputText" id="text9" value="Prazniki"></h:outputText>
               </center>
          </hx:panelBox>
          <h:panelGrid styleClass="panelGrid" id="grid1" columns="3">
               <h:outputText styleClass="outputText" id="text4" value="#{msgs.planDan}">
               </h:outputText>
               <h:inputText styleClass="inputText" id="text3" value="#{pc_Koledar.praznikBean.dan}">
               </h:inputText>
               <f:verbatim></f:verbatim>
               <h:outputText styleClass="outputText" id="text5" value="#{msgs.planMesec}">
               </h:outputText>
               <h:selectOneMenu styleClass="selectOneMenu" id="menu1" value="#{pc_Koledar.praznikBean.selectedMesec}">
                <f:selectItems value="#{pc_Koledar.praznikBean.meseci}" />
               </h:selectOneMenu>
               <f:verbatim></f:verbatim>
               <h:outputText styleClass="outputText" id="text6" value="#{msgs.planLeto}">
               </h:outputText>
               <h:inputText styleClass="inputText" id="text2" value="#{pc_Koledar.praznikBean.leto}">
               </h:inputText>
               <f:verbatim></f:verbatim>
               <h:outputText styleClass="outputText" id="text7" value="#{msgs.nazivPraznika}">
               </h:outputText>
               <h:inputText styleClass="inputText" id="text1" value="#{pc_Koledar.praznikBean.nazivPraznika}">
               </h:inputText>
               <f:verbatim></f:verbatim>
          </h:panelGrid>
          <hx:panelBox id="box3"
                     align="center"
                     layout="lineDirection"
                     width="100%"
                     style="border: 1px black solid;" bgcolor="#aec74e">
                    <center>
                      <hx:commandExButton type="submit" value="Dodaj" id="button1" action="#{pc_Koledar.doButton1Action}" lang="CP1250">
                      </hx:commandExButton>
                       <hx:commandExButton type="submit" id="button3" action="#{pc_Koledar.doButton3Action}" value="Prika�">
                      </hx:commandExButton>
                    </center>
          </hx:panelBox>
</hx:panelBox>

Couldn't you use styleClass or id for CSS?

My iphone 6's white border is cracked. Will there be any problem with it?

WIll there be any problem with cracked white borde not the screen?

The warranty for the iPhone is not and has never been International.
Warranty and support are ONLY valid in the country of origin. The only exception is the EU where the entire EU is treated as one country.
If the device will be used in India, buy it in India.
An unlocked iPhone will work on any supported GSM carrier world wide. The LTE portion of a US purchased, unlocked iPhone is unlikely to work outside North America as it does not support the appropriate bands used in other countries.

Image printing problem with Photoshop and Lightroom specifically with 11X14 cuts off top of image and moves bottom border up. Windows 7 OS - Epson Printer is working properly.

Have an unprecedented problem with printing 11X14 photos in both PS and Lightroom. The printer is operataing properly. Printing 81/2X11 correctly. Have double and triple checked all the printing settings and they are correct. Have checked with friends to no avail. This problem started yesterday. Widows 7 OS. Need help.

You show the OS receiving an image from Photoshop, and the OS starting the Epson print driver and handing it part of the image, the driver connects to the printer, then the print driver fails. It looks like a bug in the Epson rasterizer, or the printer communication.
You really need to talk to Epson. Photoshop isn't involved in that error.

Audio-Problem with Adobe Premiere Pro CC 2014 by using long Clips in AVC-Intra Codec (4Gb Border)

Hello
We own a Panasonic camera (AJ-PX5000G) and we film in 1080p50 with the AVC-Intra100 Codec. When importing longer clips in Premiere Pro, the video is fully loaded, but the waveform of the sound ends at the Time Code 00:02:28:35.
Sometimes the sound could be played after this Timecode but otherwise there is no audio. Even if we use the same clip several times we see that it works sometimes and sometimes not. It looks random.
We also tried to import the Clips with Adobe Prelude directly from the P2-Card but there are the same problems.
The Clips in 1080p50 AVC-Intra100 have a bitrate of 227Mbps. After 2 Minutes and 28 Seconds 4Gb are written on the P2-Card and the Camera starts a new picture file and 4 sound files..
It looks like Adobe Premiere Pro has problems with the correct relation of the files that all get together to one clip.
Is there anybody who can confirm this problem? Can anybody help me with this Premiere Problem?
Dennis
(Workstation: Dell Precision T3600, Intel Xeon E5-1620 @ 3.60 GHz, 16 GB RAM, Windows 7 Professional 64-bit, Service Pack 1, Premiere Pro CC 2014.1 (Build 8.1.0)   )
Mediainfo of the P2-Cards:
General
Complete name                            : \CONTENTS\VIDEO\0068T7.MXF
Format                                   : MXF
Format profile                           : OP-Atom
Format settings                          : Closed / Complete
File size                                : 3.92 GiB
Duration                                 : 2mn 28s
Overall bit rate                         : 227 Mbps
Encoded date                             : 2014-10-15 13:33:41.000
Writing application                      : Panasonic P2 2.0
Writing library                          : Panasonic P2 2.0
Video
ID                                       : 2
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : High 4:2:[email protected]
Format settings, CABAC                   : No
Format settings, GOP                     : N=1
Format settings, wrapping mode           : Clip
Codec ID                                 : 0D01030102106002-0401020201323104
Duration                                 : 2mn 28s
Bit rate                                 : 227 Mbps
Width                                    : 1 920 pixels
Height                                   : 1 080 pixels
Display aspect ratio                     : 16:9
Frame rate                               : 50.000 fps
Standard                                 : Component
Color space                              : YUV
Chroma subsampling                       : 4:2:2
Bit depth                                : 10 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 2.193
Stream size                              : 3.92 GiB (100%)
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
Mediainfo Audio-Datei P2-Card:
General
Complete name                            : \CONTENTS\AUDIO\0068T700.MXF
Format                                   : MXF
Format profile                           : OP-Atom
Format settings                          : Closed / Complete
File size                                : 13.6 MiB
Duration                                 : 2mn 28s
Overall bit rate mode                    : Constant
Overall bit rate                         : 770 Kbps
Encoded date                             : 2014-10-15 13:33:41.000
Writing application                      : Panasonic P2 2.0
Writing library                          : Panasonic P2 2.0
Audio
ID                                       : 3
Format                                   : PCM
Format settings, Endianness              : Little
Format settings, wrapping mode           : Clip (AES)
Codec ID                                 : 0D01030102060400
Duration                                 : 2mn 28s
Bit rate mode                            : Constant
Bit rate                                 : 768 Kbps
Channel(s)                               : 1 channel
Sampling rate                            : 48.0 KHz
Bit depth                                : 16 bits
Stream size                              : 13.6 MiB (100%)

Hi,
we have the same problem!
It is not possible to play audio with the AVC-Intra100 Codec fluently.
Can anybody help?
Thanks,
Anja

I have an iMac and iphoto. Currently I am having a problem with an album in iphoto. When I double click on the album all I get in the main body of the screen is a triangle with an exclamation mark and my 2 photos show at the very bottom of the window.

I have an imac and am using iphoto. Currently I am having a problem with one particular album which shows in the main part of the window a triangle with an exclamation point. The two photos are at the bottom of the main window in the same area where the "info" "edit" "create" area is. I can see the two photos but I can not get them back into the main part of the window. I can't drag them anywhere either. I can't double click or right click on either of the two photos either. All I can do is click on either one and they get a little bigger. Before I saw the exclamation point in the main body of the window all I get is two squares with nothing in them and the entire border is made up of dashes. Can someone help me?

Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Screenshot is for iPhoto 9
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Problem with an update page.

I have a problem with an update page on my website
Here's how it work
values are defualted in from the advert table - this works fine
I should then be able to change the fields and click on the update button
This works fine but ONLY when the O_year field is populated.
There doesn't seem to be anything special about the O_year field
I thought spry text validation would of been causing the issues, but I removed them and have the same problem.
For some reason the POST_MMupdate value is not being set to 'form4', which it is doing if O_year is set.
Please can someone have a look at this, code,
Also, is there a way of 'stepping through' dreamweaver code to debug it?
Thanks
Adam
$colname_Advert = "-1";
if (isset($_GET['advert_id'])) {
$colname_Advert = $_GET['advert_id'];
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$query_Advert = sprintf("SELECT * FROM advert WHERE advert_id = %s", GetSQLValueString($colname_Advert, "int"));
$Advert = mysql_query($query_Advert, $guitarswap_db) or die(mysql_error());
$row_Advert = mysql_fetch_assoc($Advert);
$totalRows_Advert = mysql_num_rows($Advert);
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form4"))
    //Сheck that we have a file
if((!empty($_FILES["PictureLocation"])) && ($_FILES['PictureLocation']['error'] == 0))
      //Check if the file is JPEG image and it's size is less than 350Kb
      $filename = basename($_FILES["PictureLocation"]["name"]);
      $ext = substr($filename, strrpos($filename, '.') + 1);
      if (($ext == "jpg") && ($_FILES["PictureLocation"]["type"] == "image/jpeg") &&
    ($_FILES["PictureLocation"]["size"] < 350000))
        //Determine the path to which we want to save this file
          $newname = dirname(__FILE__).'/upload/'.$filename;
          //Check if the file with the same name is already exists on the server
          if (!file_exists($newname))
            //Attempt to move the uploaded file to it's new place
            if ((move_uploaded_file($_FILES['PictureLocation']['tmp_name'],$newname)))
                   // echo "It's done! The file has been saved as: ".$newname;
            else
                   // echo "Error: A problem occurred during file upload!";
        else
             // echo "Error: File ".$_FILES["PictureLocation"]["name"]." already exists";
      else
         // echo "Error: Only .jpg images under 350Kb are accepted for upload";
    else
     // echo "Error: No file uploaded";
    $filename=$row_Advert['PictureLocation'];
    // set default opentoalloffers
if (!isset($_POST['checkopentoalloffers']))
    $_POST['checkopentoalloffers'] = 'n';
$updateSQL = sprintf("UPDATE advert SET PictureLocation=%s, O_Make=%s, O_Model=%s, O_Country=%s, O_Year=%s, O_Colour=%s, O_Body=%s, O_Neck=%s, O_Fingerboard=%s, O_Pickups=%s, `value`=%s, `condition`=%s, W_Make=%s, W_Model=%s, W_Country=%s, W_Year=%s, W_Colour=%s, W_Body=%s, W_Neck=%s, W_Fingerboard=%s, W_Pickups=%s, Comments=%s, opentoalloffers=%s, ChangeFlg = %s WHERE advert_id=%s",
                       GetSQLValueString($filename, "text"),
                       GetSQLValueString($_POST['O_Make'], "text"),
                       GetSQLValueString($_POST['O_Model'], "text"),
                       GetSQLValueString($_POST['O_Country'], "text"),
                       GetSQLValueString($_POST['O_Year'], "date"),
                       GetSQLValueString($_POST['O_Colour'], "text"),
                       GetSQLValueString($_POST['O_Body'], "text"),
                       GetSQLValueString($_POST['O_Neck'], "text"),
                       GetSQLValueString($_POST['O_Fingerboard'], "text"),
                       GetSQLValueString($_POST['O_Pickups'], "text"),
                       GetSQLValueString($_POST['value'], "int"),
                       GetSQLValueString($_POST['condition'], "text"),
                       GetSQLValueString($_POST['W_Make'], "text"),
                       GetSQLValueString($_POST['W_Model'], "text"),
                       GetSQLValueString($_POST['W_Country'], "text"),
                       GetSQLValueString($_POST['W_Year'], "date"),
                       GetSQLValueString($_POST['W_Colour'], "text"),
                       GetSQLValueString($_POST['W_Body'], "text"),
                       GetSQLValueString($_POST['W_Neck'], "text"),
                       GetSQLValueString($_POST['W_Fingerboard'], "text"),
                       GetSQLValueString($_POST['W_Pickups'], "text"),
                       GetSQLValueString($_POST['Comments'], "text"),
                       GetSQLValueString($_POST['checkopentoalloffers'], "text"),
                       GetSQLValueString('y', "text"),
                       GetSQLValueString($_POST['advert_id'], "int"));
mysql_select_db($database_guitarswap_db, $guitarswap_db);
$Result1 = mysql_query($updateSQL, $guitarswap_db) or die(mysql_error());
    $updateGoTo = "Member2.php";
     if (isset($_SERVER['QUERY_STRING'])) {
       $updateGoTo .= (strpos($updateGoTo, '?')) ? "&" : "?";
       $updateGoTo .= $_SERVER['QUERY_STRING'];
     header(sprintf("Location: %s", $updateGoTo));
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<link href="Layout3.css" rel="stylesheet" type="text/css" />
<script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
<script src="SpryAssets/SpryValidationTextField.js" type="text/javascript"></script>
<link href="SpryAssets/SpryMenuBarHorizontal.css" rel="stylesheet" type="text/css" />
<link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
<style type="text/css">

</style>
<script type="text/javascript">

</script>
<link href="SpryAssets/SpryValidationTextField.css" rel="stylesheet" type="text/css" />
</head>
<body class="twoColFixLtHdr">
<div id="container">
<div id="header">
    <div id="Righty">
      <ul id="MenuBar2" class="MenuBarHorizontal">
    <li><a href="index.php">Search</a>      </li>
    <li><a href="Member2.php">Members</a></li>
</ul>
<p> </p>
</div>
<span id="LoginDiv">
    <?php
      if (isset($_SESSION['MM_Username']))
        echo "hello ". $_SESSION['MM_Username']. "";
        echo " <a href='Logout.php'>Log out</a> ";
    else
        echo "
            <a href='Login.php'>Login</a> / <a href='Register.php'>Register</a>
    ?>
    </a></span>
<div id="Middle">
<h1 align="center">GuitarSwap</h1>
</div>
</div>
<div id="sidebar1">
    <h4>Members Area</h4>
    <ul id="MenuBar1" class="MenuBarVertical">
      <li><a href="Member2.php">My Adverts</a></li>
      <li><a href="NewAdvert.php">Create new Advert</a></li>
      <li><a href="UpdateUserDets.php">My Account</a></li>
    </ul>
    <h3> </h3>
</div>
<div id="mainContent">
    <h4>Update Advert</h4>
    
</div>

<div id="main3">
    <div id="main">
      <fieldset>
        <legend>Please update advert details and confirm</legend>
        <form action="<?php echo $editFormAction; ?>" enctype="multipart/form-data" method="post" name="form4" id="form4">
          <input type="hidden" name="advert_id" value="<?php echo $row_Advert['advert_id']; ?>" />
          <p></p>
          <table width="650" align="center">
            <tr valign="baseline">
              <td width="17" rowspan="15" valign="middle" nowrap="nowrap"><?php echo "<img src='upload/" .$row_Advert['PictureLocation']."' width='64' height='180'/>" ?></td>
              <td width="133" align="right" nowrap="nowrap"> </td>
              <td width="240" align="center" bgcolor="#CCCCCC"><strong>Offered</strong></td>
              <td width="240" align="center" bgcolor="#CCCCCC"><strong>Wanted</strong></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Make:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Make" type="text" value="<?php echo $row_Advert['O_Make']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Make" type="text" value="<?php echo $row_Advert['W_Make']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Model:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Model" type="text" value="<?php echo $row_Advert['O_Model']; ?>" size="30" maxlength="30" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Model" type="text" value="<?php echo $row_Advert['W_Model']; ?>" size="30" maxlength="30" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Country:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Country" type="text" value="<?php echo $row_Advert['O_Country']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Country" type="text" value="<?php echo $row_Advert['W_Country']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Year:</strong></td>
              <td bgcolor="#CCFFCC"><span id="sprytextfield1">
              <input name="O_Year" type="text" value="<?php echo $row_Advert['O_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
              <td bgcolor="#CCFFFF"><span id="sprytextfield2">
              <input name="W_Year" type="text" value="<?php echo $row_Advert['W_Year']; ?>" size="4" maxlength="4" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span><span class="textfieldMinValueMsg">The entered value is less than the minimum required.</span><span class="textfieldMaxValueMsg">The entered value is greater than the maximum allowed.</span></span></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Colour:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Colour" type="text" value="<?php echo $row_Advert['O_Colour']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Colour" type="text" value="<?php echo $row_Advert['W_Colour']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Body:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Body" type="text" value="<?php echo $row_Advert['O_Body']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Body" type="text" value="<?php echo $row_Advert['W_Body']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Neck:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Neck" type="text" value="<?php echo $row_Advert['O_Neck']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Neck" type="text" value="<?php echo $row_Advert['W_Neck']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Fingerboard:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Fingerboard" type="text" value="<?php echo $row_Advert['O_Fingerboard']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Fingerboard" type="text" value="<?php echo $row_Advert['W_Fingerboard']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Pickups:</strong></td>
              <td bgcolor="#CCFFCC"><input name="O_Pickups" type="text" value="<?php echo $row_Advert['O_Pickups']; ?>" size="30" maxlength="15" /></td>
              <td bgcolor="#CCFFFF"><input name="W_Pickups" type="text" value="<?php echo $row_Advert['W_Pickups']; ?>" size="30" maxlength="15" /></td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Condition:</strong></td>
              <td bgcolor="#CCFFCC"><label for="condition">
                <select name="condition" size="1" id="condition">
                  <option selected="selected" value="" <?php if (!(strcmp("", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>---select---</option>
                  <option value="immaculate" <?php if (!(strcmp("immaculate", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>immaculate</option>
                  <option value="excellent" <?php if (!(strcmp("excellent", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>excellent</option>
                  <option value="good" <?php if (!(strcmp("good", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>good</option>
                  <option value="well used" <?php if (!(strcmp("well used", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>well used</option>
                  <option value="poor" <?php if (!(strcmp("poor", $row_Advert['condition']))) {echo "selected=\"selected\"";} ?>>poor</option>
              </select>
              </label></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Value:</strong></td>
              <td bgcolor="#CCFFCC"><span id="sprytextfield3">
              <input name="value" type="text" value="<?php echo $row_Advert['value']; ?>" size="11" maxlength="11" />
<span class="textfieldInvalidFormatMsg">Invalid format.</span></span></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td align="right" valign="top" nowrap="nowrap"><strong>Comments:</strong></td>
              <td bgcolor="#CCFFCC"><textarea name="Comments" cols="25" rows="3"><?php echo $row_Advert['Comments']; ?></textarea></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td nowrap="nowrap" align="right"><strong>Picture location</strong></td>
              <td bgcolor="#CCFFCC"><label for="checkopentoalloffers"></label>                <input type="file" name="PictureLocation" value="<?php echo $row_Advert['PictureLocation']; ?>" size="20" /></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
            <tr valign="baseline">
              <td height="26" align="right" nowrap="nowrap"><strong>Open to all offers:</strong></td>
              <td bgcolor="#CCFFCC"><input name="checkopentoalloffers" type="checkbox" id="checkopentoalloffers" value="y" <?php if (!(strcmp($row_Advert['opentoalloffers'],"y"))) {echo "checked=\"checked\"";} ?> /></td>
              <td bgcolor="#FFFFFF"> </td>
            </tr>
          </table>
          <p> </p>
          <div id="submitdiv">
            <input type="hidden" name="MM_update" value="form4" />
            <input name="submit button" type="submit" id="submit button" value="Update Advert" />
          </div>
          <div id="exitdiv">
            <label for="button15"></label>
            <input name="button" type="button" id="button15" onclick="MM_goToURL('parent','Member2.php');return document.MM_returnValue" value="Exit" />
            <label for="button16"></label>
          </div>
          <p> </p>
        </form>
      </fieldset>
      <script type="text/javascript">
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010, isRequired:false});
var sprytextfield1 = new Spry.Widget.ValidationTextField("sprytextfield1", "integer", {validateOn:["blur"], minValue:1900, maxValue:2010});
var sprytextfield2 = new Spry.Widget.ValidationTextField("sprytextfield2", "integer", {minValue:1900, maxValue:2010, validateOn:["blur"], isRequired:false});
var sprytextfield3 = new Spry.Widget.ValidationTextField("sprytextfield3", "currency", {validateOn:["blur"], isRequired:false});
      </script>
      <br class="clearfloat" />

</div></div></div>
<script type="text/javascript">

</script>
</body>
</html>
<?php
mysql_free_result($Advert);
if (is_resource($Result1)) mysql_free_result($Result1);
?>

Please note,
Removing I investigated spry a little more, in the end I settled for removing spry altogether,
Maybe it was because the text field in a $GET (for the default) AND a $PUT (for the update)

Having a problem with commandButton attribute when i am using it under tabl

Having a problem with {color:#800000}commandButton {color}{color:#339966}attribute {color}when i am using it under{color:#ff0000} table{color}
I am using a command button under a table.
here is the example
<h:dataTable value="#{wlmHandler.plexes.plexes}" var="{color:#ff0000}onePlex{color}" border="0" cellspacing="0" cellpadding="0" width="100%" border="0">
<h:column>
<h:panelGrid border="0" cellpadding="0" cellspacing="0" columns="5">
<h:commandButton action="" styleClass="tixbutton" value="#{labels.ADD}" onclick="#{onePlex.tran}"/>
<f:verbatim> </f:verbatim>
<h:commandButton action="#{createTransaction.transactionCommand}" styleClass="tixbutton"
value="#{labels.SUBMIT}" actionListener="#{createTransaction.processAction}">
<f:attribute name="dbName" value="#{wlmHandler.dbName}"/>
<f:attribute name="plexName" value="{color:#ff9900}#{onePlex.name}"{color}/>
</h:commandButton>
</h:panelGrid>
<h:/column>
</h:dataTable >
when i am using this plex name atribute it is giving nullPointerException
{color:#ff9900}this value #{onePlex.name} i cant able to access inside the command button{color}

balu i have tried by seeing u r blog.
this is my structure of tables
plexes (if i iterate plexes table gives plex object)
|
------ plex (plex table gives transaction object)
|
------transactions(transactions table gives transaction table)
|
here i will have a command link to this link i have to pass the plex name which
will come from
i tried in this command action with HTMLDataTable getRowData()
i am not getting the selected row data .i am downcasting this getRowData() to plex.

Problem with textBox border

Similar Messages

Maybe you are looking for