Problem with the back button in the Alv ouput
i have refresh button in output of my alv report when i click on this it is getting refreshed ,now the problem is with the back button after refresh whn i click on back button it is not going to selection screen , i have to click the back button thrice to come out to the selection screen ,if have refreshed the ouput screen twice .
if i dont refresh the back button is working fine , So i have used "call to selection screen 1000" it coming to selection screen without any problem but in selection screen on clicking on back button it is again going back to output screen ,So please suggest what has to be done here .
Hi Brahmananda,
Please try to understand the flow of program and the screen navigation
the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
try using
in PAI
module exit at exit-command
in program
module exit
case ok_code
when 'BACK'.
LEAVE PROGRAM ( or any thing that you want it to be )
endcase
endmodule
regards
Ramchander rao.K
Similar Messages
-
Problem with the ALV after sending the mail
Good Morning Experts
I have a small issue with the ALV. I have a program, which has to sent email. In My program initially I am displaying basic list in the alv and user can navigate to secondary list also, by clicking on a contract number in the basic list.
I gave a tool button in the tool bar to the user in the basic list, to send the mail. When the user clicks on the I have to send the mail both the lists, basic list and seconday list in the mail as separate attachments.
Mail is going fine and later if the user chooses to see any contract in detail(Secondary List), that time ALV giving dump with message type X. And it is stopping some where in the ALV code
call method cl_gui_cfw=>get_subscriber_by_id
exporting shellid = p_handle-shellid
exceptions others = 1.
if sy-subrc = 0.
</B>message X007 with p_handle-clsid.<B>
endif.
If anybody having an Idea, how to resolve it, please tell me.
Thanks in Advance
PraveenPlease find the code for user_command form and sending the mail. Please look into this advice me if anything wrongly I coded.
*& Form user_command
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
IF r_ucomm EQ '&IC1' OR r_ucomm EQ 'SHOW'.
REFRESH: it_all[],
it_fcat1[],
it_sort[].
LOOP AT it_final INTO wa_final WHERE select EQ 'X' OR xblnr EQ rs_selfield-value.
LOOP AT it_bsid INTO wa_bsid WHERE xblnr EQ wa_final-xblnr AND zuonr IS INITIAL.
wa_all = wa_bsid.
wa_all = wa_bsid.
wa_all-booked = wa_bsid-dmbtr.
IF wa_bsid-augdt IS NOT INITIAL AND wa_bsid-augbl IS NOT INITIAL.
wa_all-paid = wa_bsid-dmbtr.
ENDIF.
wa_all-amtr = wa_all-booked - wa_all-paid.
APPEND wa_all TO it_all.
CLEAR: wa_all,
wa_bsid.
ENDLOOP.
LOOP AT it_bsad INTO wa_bsad WHERE xblnr EQ wa_final-xblnr AND zuonr IS INITIAL.
wa_all = wa_bsad.
wa_all-booked = wa_bsad-dmbtr.
IF wa_bsad-augdt IS NOT INITIAL AND wa_bsad-augbl IS NOT INITIAL.
wa_all-paid = wa_bsad-dmbtr.
ENDIF.
wa_all-amtr = wa_all-booked - wa_all-paid.
APPEND wa_all TO it_all.
CLEAR: wa_all,
wa_bsad.
ENDLOOP.
ENDLOOP.
SORT it_all BY xblnr.
PERFORM fill_fcat2.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = 'Report to display selected contracts'
is_layout = wa_layout1
it_fieldcat = it_fcat1[]
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IT_SORT = it_sort[]
i_default = 'X'
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_all[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
CASE r_ucomm.
WHEN 'BACK1' OR 'EXT1'.
PERFORM exit IN PROGRAM saplslvc_fullscreen.
WHEN '&F12' or 'CANCEL'.
PERFORM exit IN PROGRAM saplslvc_fullscreen.
WHEN 'MAIL'.
PERFORM prepare_mail.
ENDCASE.
ENDFORM. "user_command
*& Form prepare_mail
text
--> p1 text
<-- p2 text
FORM prepare_mail .
DATA:
l_lay TYPE pri_params-paart,
l_line TYPE pri_params-linct,
l_cols TYPE pri_params-linsz,
l_val TYPE c,
i_spno TYPE tsp01-rqident,
i_lines TYPE i,
i_bin TYPE i,
i_pack_list LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
i_recivers LIKE somlreci1 OCCURS 0 WITH HEADER LINE,
i_contents LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_header LIKE solisti1 OCCURS 0 WITH HEADER LINE,
i_docdata LIKE sodocchgi1,
i_excel LIKE solisti1 OCCURS 0 WITH HEADER LINE.
i_pos type i.
TYPES:
t_pripar TYPE pri_params,
t_arcpar TYPE arc_params.
"Work areas
DATA:
lw_pripar TYPE t_pripar,
lw_arcpar TYPE t_arcpar,
w_no_of_bytes TYPE i.
l_lay = 'X_65_255'.
l_line = 65.
l_cols = 255.
"Read, determine, change spool print parameters and archive parameters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
in_archive_parameters = lw_arcpar
in_parameters = lw_pripar
layout = l_lay
line_count = l_line
line_size = l_cols
no_dialog = 'X'
IMPORTING
out_archive_parameters = lw_arcpar
out_parameters = lw_pripar
valid = l_val
EXCEPTIONS
archive_info_not_found = 1
invalid_print_params = 2
invalid_archive_params = 3
OTHERS = 4.
*l_val eq space
IF sy-subrc = 0.
lw_pripar-prrel = space.
lw_pripar-primm = space.
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS lw_pripar
ARCHIVE PARAMETERS lw_arcpar
NO DIALOG.
ENDIF.
DATA: ls_prnt TYPE slis_print_alv.
ls_prnt-print = ''.
ls_prnt-prnt_title = 'X'.
ls_prnt-no_coverpage = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = 'Report to display collection pattern on Clearing Date'
is_layout = wa_layout
it_fieldcat = it_fcat[]
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'PF_STATUS_SET'
IT_SORT = it_sort[]
i_default = 'X'
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_final[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
WRITE 'Test program to generate and download as PDF'.
NEW-PAGE PRINT OFF.
CALL FUNCTION 'ABAP4_COMMIT_WORK'.
i_spno = sy-spono.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = i_spno
no_dialog = 'X'
IMPORTING
pdf_bytecount = w_no_of_bytes
pdf_spoolid = w_pdf_spoolid
btc_jobname = w_jobname
btc_jobcount = w_jobcount
TABLES
pdf = it_pdf.
LOOP AT it_pdf INTO wa_pdf.
IF w_pos = 34170.
PERFORM attach.
ENDIF.
w_stuff+w_pos(134) = wa_pdf.
ADD 134 TO w_pos.
ENDLOOP.
IF NOT ( w_stuff IS INITIAL ).
PERFORM attach.
ENDIF.
CLEAR wa_pdf.
PERFORM fill_receivers TABLES i_recivers.
PERFORM fill_contents TABLES i_contents.
DESCRIBE TABLE i_contents LINES i_lines.
READ TABLE i_contents INDEX i_lines.
CLEAR i_pack_list-transf_bin.
i_pack_list-head_start = 1.
i_pack_list-head_num = 1.
i_pack_list-body_start = 2.
i_pack_list-body_num = i_lines.
i_pack_list-doc_type = 'RAW'.
APPEND i_pack_list.
CLEAR i_pack_list.
*u2022 Attachment (pdf-Attachment)
CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO w_date1 SEPARATED BY '.'.
DESCRIBE TABLE it_att LINES i_lines.
READ TABLE it_att INTO wa_att INDEX i_lines.
i_pack_list-transf_bin = 'X'.
i_pack_list-head_start = '1'.
i_pack_list-head_num = '0'.
i_pack_list-body_start = '1'.
i_pack_list-body_num = i_lines.
i_pack_list-doc_type = 'PDF'.
i_pack_list-obj_name = 'Renewal List'.
CONCATENATE 'Report to display outstanding premium' 'Executed on' w_date1 INTO i_pack_list-obj_descr SEPARATED BY space.
i_pack_list-obj_descr = 'Exchange Rates uploaded to the database'.
i_pack_list-obj_langu = 'E'.
i_pack_list-doc_size = i_lines * 255.
APPEND i_pack_list.
CLEAR i_pack_list.
REFRESH: it_pdf[].
CLEAR wa_pdf.
REFRESH: it_all[],
it_fcat1[],
it_sort[].
LOOP AT it_final INTO wa_final.
LOOP AT it_bsid INTO wa_bsid WHERE xblnr EQ wa_final-xblnr AND zuonr IS INITIAL.
wa_all = wa_bsid.
wa_all-booked = wa_bsid-dmbtr.
IF wa_bsid-augdt IS NOT INITIAL AND wa_bsid-augbl IS NOT INITIAL.
wa_all-paid = wa_bsid-dmbtr.
ENDIF.
wa_all-amtr = wa_all-booked - wa_all-paid.
APPEND wa_all TO it_all.
CLEAR: wa_all,
wa_bsid.
ENDLOOP.
LOOP AT it_bsad INTO wa_bsad WHERE xblnr EQ wa_final-xblnr AND zuonr IS INITIAL.
wa_all = wa_bsad.
wa_all-booked = wa_bsad-dmbtr.
IF wa_bsad-augdt IS NOT INITIAL AND wa_bsad-augbl IS NOT INITIAL.
wa_all-paid = wa_bsad-dmbtr.
ENDIF.
wa_all-amtr = wa_all-booked - wa_all-paid.
APPEND wa_all TO it_all.
CLEAR: wa_all,
wa_bsad.
ENDLOOP.
ENDLOOP.
NEW-PAGE PRINT ON
NEW-SECTION
PARAMETERS lw_pripar
ARCHIVE PARAMETERS lw_arcpar
NO DIALOG.
ENDIF.
SORT it_all BY xblnr.
PERFORM fill_fcat2.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'TOP_OF_PAGE'
i_grid_title = 'Report to display selected contracts'
is_layout = wa_layout1
it_fieldcat = it_fcat1[]
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
it_sort = it_sort[]
i_default = 'X'
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_all[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
NEW-PAGE PRINT OFF.
CALL FUNCTION 'ABAP4_COMMIT_WORK'.
i_spno = sy-spono.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = i_spno
no_dialog = 'X'
IMPORTING
pdf_bytecount = w_no_of_bytes
pdf_spoolid = w_pdf_spoolid
btc_jobname = w_jobname
btc_jobcount = w_jobcount
TABLES
pdf = it_pdf.
LOOP AT it_pdf INTO wa_pdf.
IF w_pos = 34170.
PERFORM attach1.
ENDIF.
w_stuff+w_pos(134) = wa_pdf.
ADD 134 TO w_pos.
ENDLOOP.
IF NOT ( w_stuff IS INITIAL ).
PERFORM attach1.
ENDIF.
CLEAR wa_pdf.
DESCRIBE TABLE it_att LINES i_lines.
ADD 1 TO i_lines.
DESCRIBE TABLE it_att1 LINES i_bin.
READ TABLE it_att1 INTO wa_att INDEX i_bin.
DESCRIBE TABLE it_att LINES i_lines.
READ TABLE it_att INTO wa_att INDEX i_lines.
i_pack_list-transf_bin = 'X'.
i_pack_list-head_start = '1'.
i_pack_list-head_num = '0'.
i_pack_list-body_start = i_lines.
i_pack_list-body_num = i_bin.
i_pack_list-doc_type = 'PDF'.
i_pack_list-obj_name = 'Renewal List-Details'.
CONCATENATE 'Outstanding Premium-Details' w_date1 INTO i_pack_list-obj_descr SEPARATED BY space.
i_pack_list-obj_descr = 'Exchange Rates uploaded to the database'.
i_pack_list-obj_langu = 'E'.
i_pack_list-doc_size = i_bin * 255.
APPEND i_pack_list.
CLEAR i_pack_list.
APPEND LINES OF it_att1 to it_att.
i_docdata-obj_name = 'Renewal List'.
CONCATENATE 'Oustanding Premium' 'as on' w_date1 INTO i_docdata-obj_descr SEPARATED BY space.
CONDENSE i_docdata-obj_descr.
i_docdata-obj_langu = 'E'.
i_docdata-obj_prio = '1'.
i_docdata-no_change = 'X'.
i_docdata-sensitivty = 'F'.
i_docdata-doc_size = ( i_lines - 1 ) * 255 + STRLEN( wa_att ).
***Data for Header
i_header-line = 'Header'. APPEND i_header.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = i_docdata
commit_work = 'X'
TABLES
packing_list = i_pack_list[]
object_header = i_header
contents_bin = it_att[]
contents_txt = i_contents[]
receivers = i_recivers[]
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
IF sy-subrc <> 0.
ELSE.
MESSAGE 'Document Sent' TYPE 'S'.
ENDIF.
ENDFORM. " prepare_mail
Thanks
Praveen -
Problem with holding back button to flash phone
I cant intall xrecovery. I tried many tutorials. It just do not work when i hold/ spam click back button at white sony logo. I cant even reintall my soft using SUS, becouse nothing is going on when i press back button (according to SUS instructions). What am i doing wrong? I have X10 pro mini with 2.1-update1 2.1.1.A.0.6, core version 2.6.29 SEMCUser@SEMCHost #1. Any tutorial i try, i copy xrecovery files to my system/bin foder and pressing back button does not work. I wonder why, in SUS update holding back does not work also... So just standard sony ericsson animation appears after while. Please help me, i am stuck from month now.
*Moved to Android development*
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
hi guys,
while executing my ALV report i had got this error message.
You attempted to access an unassigned field symbol
(data segment "-1").
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Reg,
HariharanHi Sunitha,
In ALV Filter problem , Please refer below SAP Note 381360.
SAP Note 381360 : For Filter issues
check this link
https://service.sap.com/sap/support/notes/381360
Regards,
GJ
Edited by: Shankar GJ on Apr 26, 2010 6:23 PM -
I bought an iPhone 5 around fifteen days back and it has already started to give problem with the on/off button. I have to press it five six times to switch it on or off. I am so frustrated by the fact that if I bring it to the service centre, I am going to get a refurbished phone in place of my brand new phone which I just bought. The idea of a used phone repulses me. Any solutions ?
sumeshdua wrote:
The idea of a used phone repulses me.
Why? Your current phone is used... it has been since the instant it was removed from the shrink wrap and turned on.
sumeshdua wrote:
Any solutions ?
Live with the phone as is.
Take the device to Apple for evaluation... it may not need replacement.
Even if it does, neither you or the Apple tech should be able to tell if the replacement is new or refurbished. -
Problems with the home button and generally freezing and shutting down often.
I have had this iPad 2 for around 3 months. After about a month I noticed that I was having to press the home button multiple times in order to get it to respond. It is now at a stage where I have to press it as many as 12-13 times. It's won't do this every time but all day for maybe 3 out of 5 days the other times it works fine.
As well as this I have also had issues with the Internet shutting down, Skype going crazy, picture albums popping up and then vanishing and so on. I'm not a computer wiz but I would describe it as going crazy two or three times a day.
While I was in a shopping centre about a week ago I asked about the problems in an apple store. The man was very helpful and asked if I had it on me so he could look at it. Unfortunately I didn't be he said I could bring it back whenever I like and it would take around 30 mins for someone to check it out. He said most Likley they would just give me a new one and that would be that. So of course happy that it could be sorted I went home. Today I decided to drive the nearly two hours down to Brisbane after having a nightmare time trying to Skype my friend this morrning. I hot to the store and asked if it could be looked at only to be told I need an appointment. I showed the card that I had been given and explained what I had being told. To cut a long story short he agreed that I had been told that but said the assistant clearly didn't know what he was on about and that I should come back. I offered to wait but dispute the shop being more full of staff watching movies and downloading songs then actual customers I was basically denied any sort of help and told to call the office to arrange an appointment.
Sorry to rant! I just thought that apple were renowned for good service? 5 hours later I'm home with the same issues.
If anyone has had similar problem with the device or even customer service I would be intrested.
Regards,Me too! I had many bugs and returned my phone for a brand new one that did this the first time it was turned on at the Apple store. I was told it is a "software issue" and to "reboot the phone" if it continued to happen. It happens almost every time I try to use my phone. I've rebooted three times in a row some days. Nothing really seems to help. I keep waiting for an update.
-
Problem with the browse sequence back and browse sequence next widget placed in the screen layout
Hi,
Some basics: We are using Robohelp 10 to generate multiscreen html5 output. We used the pharmaceutical screen layout downloaded from: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
Also
This shows up in the layout.css file:
a.wBSBackButton {
margin: 0 8pt 0 0;
padding: 0;
background-color: transparent;
img.wBSBackButton {
border: none;
a.wBSNextButton {
margin: 0 8pt 0 0;
padding: 0;
background-color: transparent;
img.wBSNextButton {
border: none;
Also btw, I forgot to mention that we are linking our FrameMaker files.
Appreciate the help.
Thanks!hi pradeep
It does not happen but if you Wait for a while that may be solved -
After a successful home button repair on my iPhone 4, I've got a buzzing sound when I make or receive calls. No problem with the speaker as I can listen to online radio stations and my music.
I guess your definition of a "successful repair" is different from most people's.
If you got it serviced by Apple, take it back to them.
If you had it serviced by a 3rd party, Apple won't touch it. Take it back to whoeever fixed it for you. -
Was there a problem with the last update? Every time I try to watch videos it goes back to the home screen
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
My iPod touch 5G has a problem with its back camera, there's a dark spot on picture quality and won't focus, it will only focus on things 5-7 inches away from the iPod. Could I go to apple and see if they can repair it or give me a new one? Someone help please.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
If the iPod is defective and not abused Apple will exchange your iPod for a refurbished one at no cost -
Does anyone else have problems with the wifi connection on their 4th generation Mine keeps going off line and its only 3 weeks old.I had the ipad mini and this problem never existed. I brought it back to the shop where i bought it Expert Laois last week and they said they couldnt find a problem but had to take it back today as it keeps disconneting from wifi still, anyway they are sending it back for repair and it am left with no ipad. After spending in excess of 700e i feel that this is really bad after sales service. I bought something that i want to use now and cant so what a waste of money it is .
Thankyou, but the shop said that they spoken to apple and that they have now changed their policy and that they do not give a replacement. So are you telling me that their information is false. Also what should they have done. This problem has existed since i bought it.????? What should i do?????
-
I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?
What "everything" have you tried?
What exact version number (down to the last decimal) is your AE?
What OS are you using?
What are your other system specs?
When did it work last? What happened between then and now?
FAQ: What information should I provide? -
Problem with the "mail me" button
Since I installed both Iweb 09 and Snow Leopard, there is a problem with the "mail me" buttons on my websites. Nothing happens when i click on it even if i see my web adress when my cursor is on the button.
Do somebody had the same problem and do you know how to avoid it.
Thanks a lotI checked your site and found that the mail me button was not overlapping or touching any other object and positioned entirely in the footer of the page. All looks good and it works for me. You might try moving the button, logo and counter to the bottom of the page content section, publish and see if that makes a difference for those computers that can't.
Try the following on your Macbook, open Safari, clear the cache (CommandOptionE), load your site and try again. If that makes it work for your MB tell your friends to clear their caches and try again. Might be something as simple as that. -
I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.
I have the problem with the eFax Create Account button being grayed out for my newly purchased 6525.
Can you help?Hi Marv13, disregard my last post. The 6520 does have eFax capabilities and the support document I provided a link to needs updating. If you contact HP Cloud Services phone support they will be able to resolve this issue for you. The number and available times are posted below:
HP Cloud Services
1-855-785-2777
Hours of Operation
Monday-Friday 8am-11pm ET
Saturday 10am-6:30pm ET
Best.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
Problem with the back camera in iPhone 4 (Black Shadow)
Hi, I have a problem with the back camera. When turned on I can see a black shadow on one side and when I take the photo, appears in all the photos.
I searched on the Internet to resolve this problem but I haven't been successful. A friend told me that maybe it is dirt that was introduced into the cover but I don't think It's true.
The iPhone haven't dropped me for some quite time and don't crashing.
Look here is a photo to show you how the black shadow looks like:
Please, anyone know what the problem can be?It certainly does work.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved. -
I have a problem with the keyboard on my MacBook. The letters are typing as symbols and the delete and return/enter buttons do not work. Does anybody know how to fix this?
Hey skyshade13,
Thanks for the question. The following article outlines how to restore a previous iTunes library should there be no content after updating. While the article does not speak specifically to your symptoms, attempting the steps by utilizing the "Previous iTunes Libraries" folder may resolve your issue.
No content shows up in iTunes after updating
http://support.apple.com/kb/TS1967
For further information see the following information:
OS X Lion: iTunes opens to "created by a newer version" alert
http://support.apple.com/kb/TS3918
iTunes: How to re-create your iTunes library and playlists
http://support.apple.com/kb/HT1451
Thanks,
Matt M.
Maybe you are looking for
-
I recently got an iPad and want to use it in the classroom toad in teaching history and geography, any suggestions on how to get started?
-
Javax.servlet.jsp.JspException: Exception creating bean of class ProdFormFB
Hi I am trying to deploy a struts based web application using "DynaActionForms" When I am trying to access the jsp page I am getting the following error. I am providing as much as details as it can help full to u. Thank u. FormBean class ProdFormFB.j
-
N97 application manager issue- Nokia Bots???
Dear All, I'm not able to view installed applications from the applications manager. The screen goes off for a few seconds and goes back to the root menu. This issue seems to have cropped up ever since i installed the Nokia Bots. Has anyone else expe
-
Hi all, I did a scheduling aggrement for a item and maintained the qty 10,280 drums. Then i did a inbound delivery for qty 528. I did batch split of 528 in to 6. so it is 8011512612734+46. While doing posts Goods receipt i am getting an error message
-
IPhoto 8.11 crashes with Dyld Error Message
Dyld Error Message: Library not loaded: /System/Library/Frameworks/CoreAudioKit.framework/Versions/A/CoreAudioKit Referenced from: /System/Library/PrivateFrameworks/iLifeSlideshow.framework/Versions/A/Framework s/iLifeSlideshowProducer.framework/Vers