Problem with "user data detail"

Hi I am using EDQ 9.0.6 in Window 7 platform.
I need some support from the community on how to make "user data detail" tool work.
As show in the picture in the link,
http://img843.imageshack.us/img843/5985/vend.jpg in The datapane, there is no user data detail show.
also as the result i am also unabe to make user notification by email work.
I will be very much appliciate for all the help i can get.
Thanks in advance
Supanut

Thank you for your helpful reply.
I make a test and it is really as you and the help file stated.
It is working on realtime data input.
If you would be kind to help me more,
My destination data table has a field named "UPDATE_USER" to record name of who put or update the data.
Are there anyway to link EDQ username to be put in the output data so that non EDQ user know which of the edq user put the data in?

Similar Messages

Problem with User Data Entry Into a Control

I'm writing some code where the user must correctly enter numeric data for a number of parameters (eg wavelength, time, energy etc) before the program continues (eg via a 'click button when done' type command). I'm using a while loop to lock the done button out and hold progress of the program until all data entered is valid (eg using a boolean AND statement across all data input parameters) For example, the entered time must between 30-60 seconds and a boolean test on the time will remain low until the time is within this band.
Unfortunately, I've noticed that non-labview users do not click away from the control box (or use the tick box) when entering data, and a problem arises when they have establised valid data, bu
t then start to enter stupid data in a control field (eg time = -5 seconds). If they don't confirm the data input (eg by using the tick box) my boolean trap stays high and the done button is available to allow them out of the loop. Unfortunately, once on the other side of the loop, the control carries through time = -5 seconds, which of course screws up the analysis!!!
I have solved the problem in my own way, but my solution is not elegant, and users complain that the controls are 'clicky'. {And no, I can't tell them to enter the data properly!!!}
Has anyone come across a neat solution to this problem?

For that specific example where you merely have to check the range, you can set the range properties of numeric controls before entering the loop. Then LabVIEW will automatically coerce user input.
For more complicatated validation, use the trick illustrated in the picture: the Stop button is fed to a shift register so the loop iterates one more time to validate inputs before exiting.
LabVIEW, C'est LabVIEW
Attachments:
validation.png ‏4 KB

Facing problem with a date column in select query

Hi,
I am facing problem with a date column. Below is my query and its fainling with " invalid number format model" .
Query: SELECT *
FROM EMP
WHERE trunc(LAST_UPDATED) >= to_date(to_char(22-05-2009,'dd-mm-yyyy'),'dd-mm-yyyy')
LAST_UPDATED column is "DATE" data type.
Please help me Thanks

Radhakrishna Sarma wrote:
SeánMacGC wrote:
WHERE LAST_UPDATED >= to_date('22-05-2009','dd-mm-yyyy');
You do not need the TRUNC here in any case.
I don't think so. What if the user wants only data for 22nd May and the table has records with date later than 22nd also? In that case your query willl not work. In order for the Index to work, I think the query can be written like this I think Sean is right though. Use of TRUNC Function is quiet useless based on the condition given here, since the to_date Function used by OP will always point to midnight of the specified date, in this case 22-05-2009 00:00:00.
Regards,
Jo
Edit: I think Sean proved his point... ;)

Problem with loading data to Essbase

Hi All,
I have a problem with loading data into Essbase. I've prepared maxl script to load the data, calling rule file. The source table is located in RDBMS Oracle. The script works correctly, ie. generally loads data into Essbase.
But the problem lies in the fact, that after deletion of data from Essbase, when I'm trying to load it again from the source table I get the message: WARNING - 1003035 - No data values modified by load of this data file - although there is no data in Essbase... I've also tried to change the mode of loading data from 'overwrite' to 'add to existing values' (in rule file) but it does'nt help ... Any ideas what can I do?

Below few lines from EPM_ORACLE_INSTANCE/diagnostics/logs/essbase/dataload_ODL.err:
[2013-09-24T12:01:40.480-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received Validate Login Session request
[2013-09-24T12:01:40.482-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received client request: Get App and Database Status (from user [admin@Native Directory])
[2013-09-24T12:01:54.488-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: MaxL: Execute (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Received client request: MaxL: Describe (from user [admin@Native Directory])
[2013-09-24T12:01:54.492-10:01] [ESSBASE0] [MLEXEC-2] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1115777344] Output columns described
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Define (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.494-10:01] [ESSBASE0] [MLEXEC-3] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1102616896] Record(s) fetched
[2013-09-24T12:01:54.496-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1116830016] Received client request: MaxL: Fetch (from user [admin@Native Directory])
[2013-09-24T12:01:54.498-10:01] [ESSBASE0] [AGENT-1160] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1114724672] Received Validate Login Session request
[2013-09-24T12:01:54.499-10:01] [ESSBASE0] [AGENT-1001] [NOTIFICATION] [16][] [ecid:1379989900303,0] [tid:1101564224] Received client request: Get Application State (from user [admin@Native Directory])

Problem with the date conversion

Hi Friends,
i am facing the problem with the date conversion, Actuall my requirement is to pass the date to the screen based on the user setting roles(SU01).
I have fetched the user setting date format by using the funciton module SUSR_GET_USER_DEFAULTS, The function module picks the exact user date setting (Like as MM/DD/YYYY, MM.DD.YYYY, DD.MM.YY).
After that i have implemented the FORMAT_DATE_4_OUTPUT funciton module for converting of the user role setting date format into system date format.
for the english language case the funciton module FORMAT_DATE_4_OUTPUT works fine but the funciton module not supported for other languages
Can you please provide the Function Moudle for user setting date conversion.
The funciton module is most important for us,
Thanks
Charan
Moderator message: date conversion questions = FAQ, please search before posting.
Edited by: Thomas Zloch on Dec 21, 2010 2:19 PM

Hope this logic helps you.
DATA LF_DATE TYPE DATS VALUE '21122010'. " 21-dec-2010
DATA LF_DATE_BI(10).
WRITE LF_DATE TO LF_DATE_BI. "Now LF_DATE_BI contains the date in user format
"Now populate the value LF_DATE_BI to the screen field

PSP: problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Problem with user-defined functions in XQuery String

hello
i've a problem with user-defined functions in XQuery String
details are here (the code is not Human-readable via forum's embedded editor ?? strange)
http://docs.google.com/Doc?id=ddqwddsr_21c96d9x
thanks !!

See
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    return {$inputtype}
                 local:test_function("1","2")' returning content) o from dual
Error at line 5
ORA-19114: error during parsing the XQuery expression:
LPX-00801: XQuery syntax error at '{'
3                       return {$inputtype}
-                              ^
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    $inputtype
                 local:test_function("1","2")' returning content) o from dual
O
2
1 row selected.

I have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone

What brand/model USB drive? Is it bus or AC powered?
On Mail...
First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
(Could be a different folder here if you chose such in Mail Prefs)
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist

Problem with order data

Hi, I have a problem with order data. A string column has these values:
A....
B....
PSTA-FRA
PSTA+FRA
Q....
R....
If i order data directly from db ( select column1 from table order by column1 ) , i obtain this result:
PSTA-FRA
PSTA+FRA
If i create a simple report on that table and order on that column the result is:
PSTA+FRA
PSTA-FRA
I can obtain correct output if I set parameter 'Perform group on server' but if i write a selection formula :
{table.column} >= 'PSTA+FRA'
record containing PSTA-FRA value not appear.
I've tried both with Crytal 8.5 and Crystal 11 R2 sp6, database is Sybase SQL Anywhere odbc connection.
Thanks in advance

Ordering is done according to the ASCII values of the characters.
In R2 create a new report and log onto your DB and select Command for your data source. Paste in the SQL you use to get the data in the order the server users. Then you don't have to use CR to do the sorting. DB Servers are much more efficient at collecting the data than CR is.
Thank you
Don

PLSQL Server Pages (PSP): problems with viewing data

Hello.
I'm currently working at on-line shop and have some problems with viewing data from database. When there is no much inserts to table its working very well. But after inserting all Inserts I have its acting weird.
Sample with 10 INSERTS:
http://gafgarion.atspace.com/psp/1.jpg
Sample with 100 INSERTS:
http://gafgarion.atspace.com/psp/2.jpg
I'm using Oracle 9i. when I have more data in my database its acting weird. There is SELECT only from one table, but sometimes I have data from other tables aswell.
I didnt touch any config files or something else. Only created new User and DAD.
any ideas what should I do to fix that ??
thnx in advice

Hello,
My guess is that you are speaking about PLSQL Server Pages (PSP), and the PLSQL Web Toolkit.
This is why I do not think that you will have lot of answer since this forum is targeted toward Web Services developer (XML, SOAP, and so on)
I am inviting you to ask your question on the general Oracle Application Server - General or PLSQL forums.
Regards
Tugdual Grall

Problem with Java Dates and UPDATE for SQL2000

I am having problems with the date formats for Java. I am trying to put the current date time into a SQL table, here it the code I am using:
var Today = new Date()
var conn = Server.CreateObject( "ADODB.Connection" )
conn.Open( "Provider=SQLOLEDB;Server=(local);Database=BillTracking;UID=sa;PWD=;")
var sql = "UPDATE BillAssignments SET DatePosted = " + Today + " WHERE AssignmentID = '" + Request.QueryString("AssignmentID") + "'"
var rs = conn.execute(sql)
I keep getting different errors and I have been unable to find a solution yet. I know that I need to change the date format from the Java standard to the one that SQL likes.
Help....
Norm...

Please tell us where the Java part of this comes in. I see that you are using JavaScript to load up data via an ADO connection (presumably on an IIS platform) - but I do not see where you are using Java
Lee

Problem with billing date at closed period

Hi
We have a problem with billing date in transaction . Previously we could set up different (earlier) billing date than the actual posting period and now it is not working. We receive an error message that the posting period is closed ) .
I attached an example invoice which we managed to post and where you can see what Iu2019m thinking about, parking number: 1024337, BILLING DOCUMENT: 841835. In this case the billing date was at 30.11.2007, but the posting in 15.07.2008 and we managed to post.
Pls help that issue
yps

hi,
it is due to posting period closed for the month of 07/2008.
u need to open posting during that period.
Regards,
Greeshma

Problems with retrieving data from tables with 240 and more records

Hi,
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.
I installed Oracle 11.2.0 Client and I started to have problems with retrieving data from tables.
First I used the same connection string, driver and so on (O10 Oracle 10g) then I tried ORA Oracle but with no luck. The result is like this:
I'm able to connect to database. I'm able to retrieve data but from small tables (e.g. with 110 records it works perfectly using both O10 and ORA drivers). When I try to retrieve data from tables with like 240 and more records retrieval simply hangs (nothing happens at all - no error, no timeout). Application seems to hang forever.
I'm using Powerbuilder to connect to Database (either PB10.5 using O10 driver or PB12 using ORA driver). I used DBTrace, so I see that query hangs on the first FETCH.
So for the retrievals that hang I have something like:
(3260008): BIND SELECT OUTPUT BUFFER (DataWindow):(DBI_SELBIND) (0.186 MS / 18978.709 MS)
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=1
(3260008): ,len=160,type=DECIMAL,pbt=4,dbt=0,ct=0,prec=0,scale=0
(3260008): EXECUTE:(DBI_DW_EXECUTE) (192.982 MS / 19171.691 MS)
(3260008): FETCH NEXT:(DBI_FETCHNEXT)
and this is the last line,
while for retrievals that end, I have FETCH producing time, data in buffer and moving to the next Fetch until all data is retrieved
On the side note, I have no problems with retrieving data either by SQL Developer or DbVisualizer.
Problems started when I installed 11.2.0 Client. Even if I want to use 10.0.1 Client, the same problem occurs. So I guess something from 11.2.0 overrides 10.0.1 settings.
I will appreciate any comments/hints/help.
Thank you very much.

pgoel wrote:
I've been connecting to Oracle 11g Server (not sure exact version) using Oracle 10.1.0 Client and O10 Oracle 10g driver. Everything was ok.Earlier (before installing new stuff) did you ever try retrieving data from big tables (like 240 and more records), if yes, was it working?Yes, with Oracle 10g client (before installing 11g) I was able to retrieve any data, either it was 10k+ records or 100 records. Installing 11g client changed something that even using old 10g client (which I still have installed) fails to work. The same problem occur no matter I'm using 10g or 11g client now. Powerbuilder hangs on retrieving tables with more than like 240 records.
Thanks.

Facing lot of problems with the DATA object -- Urgent

Hi,
I am facing lot of problems with the data object in VC.
1. I created the RFC initially and then imported the data object in to VC. Later i did some modifications to RFC Function module,and when i reload the data object, I am not able to see the new changes done to RFC in VC.
2. Even if i delete the function module, after redeploying the IVIew, results are getting displayed.
3. How stable is the VC?
I restarted the sql server and portal connection to R3 is also made afresh.... still i am viewing such surprise results..
please let me know what might be the problem.

Hi Lior,
Are u aware of this problem.
If yes, please let me know...
Thanks,
Manjunatha.T.S

Problem with a data set: DIAdem crashes

Hi,
I've got a problem with a data set. When I want to zoom in DIAdem-View, DIAdem crashes with the following message (translated from German ;-):
error type: FLOAT INEXACT RESULT or FLOAT INVALID OPERATION or FLOAT STACK CHECK
error address: 00016CB8
module name: gfsview.DLL
I've got some similar data set not showing such problems. Further on I scanned the data a bit, but in the 59000 points I didn't see anything special. I did try to delete "NOVALUE"s as well, but after that there still exist "NOVALUE"s.
Does anyone have an idea what to look for?
Thanks,
Carsten

Carsten,
Could you please upload you Citadel database to the following FTP site:
ftp.ni.com/incoming
If you want to compress (ZIP) and/or put a password on the data, that's fine. Please send me a private email at [email protected] (with the file name and password if you put one on the file) once you have uploaded the file and I will check it out.
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

Problem with "user data detail"

Similar Messages

Maybe you are looking for