Problem with Weblogic Builder SP1
I have a problem with Weblogic Builder SP1. I basically re-used my EJB deployment
descriptors from WL5.1 in WL8.1. Before SP1, i have no problem loading my EJB
in WB. But with SP1, WB throws weblogic.marathon.model.LoadFailureException.
I re-attempted by jarring my EJB with WL5.1 descriptors and used my friend's WB
(not SP1) to export new descriptors which I used to re-jar. This new EJB is again
not recognised by WB SP1?
What is wrong?
The exception is as follows:
Opening module myproj.jar
java.lang.NullPointerException
at java.util.Arrays.sort(Arrays.java:1181)
at weblogic.marathon.model.EJBJarCMBean.initRelations(EJBJarCMBean.java:1212)
at weblogic.marathon.model.EJBJarCMBean.initBeans(EJBJarCMBean.java:1098)
at weblogic.marathon.model.EJBJarCMBean.setup(EJBJarCMBean.java:1144)
at weblogic.marathon.tasks.OpenModuleTask.getEJBModule(OpenModuleTask.java:156)
at weblogic.marathon.tasks.OpenModuleTask.figureOutModule(OpenModuleTask.java:191)
at weblogic.marathon.tasks.OpenModuleTask.figureOutModule(OpenModuleTask.java:230)
at weblogic.marathon.tasks.OpenModuleTask.runBackground(OpenModuleTask.java:89)
at weblogic.tools.jellybeans.core.task.TaskThread.execute(TaskThread.java:127)
at weblogic.tools.jellybeans.core.task.TaskThread.run(TaskThread.java:64)
Module myproj.jar descriptors failed to load
The EJB has no problem deploying.
Rob Woollen <[email protected]> wrote:
You'll have to at least show us the error you get from marathon.
Does your application deploy to the server?
-- Rob
Robin Tan wrote:
I have a problem with Weblogic Builder SP1. I basically re-used myEJB deployment
descriptors from WL5.1 in WL8.1. Before SP1, i have no problem loadingmy EJB
in WB. But with SP1, WB throws weblogic.marathon.model.LoadFailureException.
I re-attempted by jarring my EJB with WL5.1 descriptors and used myfriend's WB
(not SP1) to export new descriptors which I used to re-jar. This newEJB is again
not recognised by WB SP1?
What is wrong?
Similar Messages
-
Problems with weblogic clustering in 6.1 sp3
We have spent a lot of time trying to get our application deployed to
a cluster using weblogic 6.1 sp3 and we consistently receive a failure
when we attempt to start the managed server. This was not a problem
with weblogic sp1--we got our application to deploy to the cluster
successfully; although there was another weblogic bug there with
clients accessing EJB clusters--we won't go into that here...
We have tried this on both a Windows 2000 machine and an HP machine
running weblogic sp3. The same error occurs on both platforms.
The error in deploying our application to the cluster against weblogic
sp3 looks to have to do with our custom security realm. Inside our
custom realm we make use of a configurable providerUrl which we set to
the cluster address/port. The custom realm makes a call where it
passes in the providerUrl to:
weblogic.management.Helper.getMBeanHome(..., providerUrl,...)
When we have our providerUrl set to the cluster address/port--e.g.,
t3://clustermember1:7001
and attempt to start the managed server we get the error:
Starting WebLogic Server ....
Connecting to http://adminserver:7117...
The WebLogic Server did not start up properly.
Exception raised:
weblogic.management.configuration.ConfigurationException:
clustermember1 not found
at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:1084)
at weblogic.management.Admin.initialize(Admin.java:340)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
at weblogic.Server.main(Server.java:35)
Reason: Fatal initialization exception
When we have our providerUrl set to the admin server address--e.g.,
t3://adminserver:7117
everything starts up fine.
Does anyone know why this would work on sp1 and not sp3 of weblogic
6.1?
We verified that all passwords are correct and everything else we
could determine--any ideas would be helpful.
We don't want the providerUrl to point at our admin server, we want it
to point at the cluster address/port.
When we get the managed server error, we received this error on the
AdminServer:
2002-08-15 16:52:23,019 ERROR [ExecuteThread: '11' for queue:
'default'] (com.msa.gabriel.share.security.wlrealm.GabrielRealm) -
Caught naming exception null; throwing RuntimeException.
javax.naming.CommunicationException. Root exception is
java.net.ConnectException: t3://tomtate.msais.com:7119: Destination
unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to
destination
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:155)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:307)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:211)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:149)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:665)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
at javax.naming.InitialContext.init(InitialContext.java:222)
at javax.naming.InitialContext.<init>(InitialContext.java:198)
at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getNamingContext(GabrielRealm.java:416)
at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getConnection(GabrielRealm.java:347)
at com.msa.gabriel.share.security.wlrealm.GabrielRealm.access$000(GabrielRealm.java:51)
at com.msa.gabriel.share.security.wlrealm.GabrielRealm$2.run(GabrielRealm.java:225)
at weblogic.security.acl.Security.doAsPrivileged(Security.java:489)
at com.msa.gabriel.share.security.wlrealm.GabrielRealm.myDoAsPrivileged(GabrielRealm.java:578)
at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.java:221)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
at weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.java:356)
at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:205)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2518)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2260)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
<Aug 15, 2002 4:52:23 PM EDT> <Error> <HTTP>
<[WebAppServletContext(8091823,wl_management_internal2,/wl_management_internal2)]
Servlet failed with Exception
java.lang.RuntimeException
at com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.java:260)
at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
at weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.java:356)
at weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(ServletSecurityManager.java:205)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2518)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2260)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Thanks for any help.
Rich
Bottom line:
In our custom realm we were not handling user guest correctly. Even if you
have guest user disabled, Weblogic seems to have hard-coded guest to
send messages to the cluster every-so-often. Not sure there--couldn't get
an answer out of bea as to exactly why we see guest still being used...
It seems that with sp3, the user guest interaction started happening earlier
than it did with sp1, consequently making our realm code fail when trying to
retrieve the guest user like someone we knew about in our system.
Hence, our getUser and authUserPassword methods now return null for both
users guest and system, making the secondary realm (file realm) be used to
authenticate and resolve guest & system. BEA helped get our code fixed;
however, we still don't have a lot of depth in understanding Weblogic
server's use of guest...
Apparently, in 7.x the guest & system user behavior and configuration is
different also... We'll see when we start digging into that migration.
Rich
[email protected] (Rich Koch) wrote in message news:<[email protected]>...
> Thanks for the responses--we're working with weblogic support now. We
> think that the custom realm that we have [the developer that wrote it
> left the company] is the problem.
>
> The original developer was told by someone to check:
> weblogic.security.acl.internal.ClusterRealm.THE_ONE != null
>
> In order to determine if the JNDI was available/ready for the whole
> cluster.
>
> It seems that the meaning/setting of THE_ONE changed with this respect
> from
> sp1 to sp3--i.e., this is no longer a valid test to tell us if the
> JNDI is
> ready for the cluster.
>
> We believe this was used because the 'system' user has to be
> authenticated before the custom realm is up. Originally, before this
> check was in place, an exception was received when authenticating
> 'system'. This appears to be a weblogic limitation/issue. Support
> has told us that this is different in weblogic 7.0. Unfortunately, we
> can't upgrade from 6.1 yet.
>
> We'll post the solution when this gets figured out.
>
> Rak
>
> "Sabha" <[email protected]> wrote in message news:<[email protected]>...
> > There was a security restriction enforced from sp2/sp3 onwards in terms of
> > looking up mbeans from admin server.
> >
> > This might cause things to fail if you are attempting to lookup Mbeans with
> > guest priviliges from admin server. Also, can you try doing the following:
> >
> > Run " java weblogic.Admin -url adminServer -username system -password
> > .... -GET -pretty -type Server" and check whether the named clustermember1
> > is available in the list or not.
> >
> > Also you seem to be getting some security exception - can you check that.
> >
> > t3://tomtate.msais.com:7119: Destination
> > unreachable; nested exception is:
> >
> > --- Try running weblogic.Admin PING on this one and see whether you are
> > able to reach this server upon the error message.
> >
> > --Sabha
> >
> > "Rich Koch" <[email protected]> wrote in message
> > news:[email protected]...
> > > We have spent a lot of time trying to get our application deployed to
> > > a cluster using weblogic 6.1 sp3 and we consistently receive a failure
> > > when we attempt to start the managed server. This was not a problem
> > > with weblogic sp1--we got our application to deploy to the cluster
> > > successfully; although there was another weblogic bug there with
> > > clients accessing EJB clusters--we won't go into that here...
> > >
> > > We have tried this on both a Windows 2000 machine and an HP machine
> > > running weblogic sp3. The same error occurs on both platforms.
> > >
> > > The error in deploying our application to the cluster against weblogic
> > > sp3 looks to have to do with our custom security realm. Inside our
> > > custom realm we make use of a configurable providerUrl which we set to
> > > the cluster address/port. The custom realm makes a call where it
> > > passes in the providerUrl to:
> > > weblogic.management.Helper.getMBeanHome(..., providerUrl,...)
> > >
> > > When we have our providerUrl set to the cluster address/port--e.g.,
> > > t3://clustermember1:7001
> > >
> > > and attempt to start the managed server we get the error:
> > >
> > > Starting WebLogic Server ....
> > > Connecting to http://adminserver:7117...
> > >
> ***************************************************************************
> > > The WebLogic Server did not start up properly.
> > > Exception raised:
> > > weblogic.management.configuration.ConfigurationException:
> > > clustermember1 not found
> > > at weblogic.management.Admin.getBootstrapLocalServer(Admin.java:1084)
> > > at weblogic.management.Admin.initialize(Admin.java:340)
> > > at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:359)
> > > at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
> > > at weblogic.Server.main(Server.java:35)
> > > Reason: Fatal initialization exception
> > >
> ***************************************************************************
> > >
> > > When we have our providerUrl set to the admin server address--e.g.,
> > > t3://adminserver:7117
> > >
> > > everything starts up fine.
> > >
> > > Does anyone know why this would work on sp1 and not sp3 of weblogic
> > > 6.1?
> > > We verified that all passwords are correct and everything else we
> > > could determine--any ideas would be helpful.
> > >
> > > We don't want the providerUrl to point at our admin server, we want it
> > > to point at the cluster address/port.
> > >
> > > When we get the managed server error, we received this error on the
> > > AdminServer:
> > >
> > > 2002-08-15 16:52:23,019 ERROR [ExecuteThread: '11' for queue:
> > > 'default'] (com.msa.gabriel.share.security.wlrealm.GabrielRealm) -
> > > Caught naming exception null; throwing RuntimeException.
> > > javax.naming.CommunicationException. Root exception is
> > > java.net.ConnectException: t3://tomtate.msais.com:7119: Destination
> > > unreachable; nested exception is:
> > > java.net.ConnectException: Connection refused; No available router to
> > > destination
> > > at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:155)
> > > at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:207)
> > > at
> > weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
> > textFactoryDelegate.java:307)
> > > at
> > weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
> > textFactoryDelegate.java:211)
> > > at
> > weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
> > ory.java:149)
> > > at
> javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:665)
> > > at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:246)
> > > at javax.naming.InitialContext.init(InitialContext.java:222)
> > > at javax.naming.InitialContext.<init>(InitialContext.java:198)
> > > at
> > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getNamingContext(Gabriel
> > Realm.java:416)
> > > at
> > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getConnection(GabrielRea
> > lm.java:347)
> > > at
> > com.msa.gabriel.share.security.wlrealm.GabrielRealm.access$000(GabrielRealm.
> > java:51)
> > > at
> > com.msa.gabriel.share.security.wlrealm.GabrielRealm$2.run(GabrielRealm.java:
> > 225)
> > > at weblogic.security.acl.Security.doAsPrivileged(Security.java:489)
> > > at
> > com.msa.gabriel.share.security.wlrealm.GabrielRealm.myDoAsPrivileged(Gabriel
> > Realm.java:578)
> > > at
> > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.jav
> > a:221)
> > > at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
> > > at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
> > > at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
> > > at
> > weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.j
> > ava:356)
> > > at
> > weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(Servle
> > tSecurityManager.java:205)
> > > at
> > weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
> > ntext.java:2518)
> > > at
> weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
> > :2260)
> > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > > <Aug 15, 2002 4:52:23 PM EDT> <Error> <HTTP>
> > >
> > <[WebAppServletContext(8091823,wl_management_internal2,/wl_management_intern
> > al2)]
> > > Servlet failed with Exception
> > > java.lang.RuntimeException
> > > at
> > com.msa.gabriel.share.security.wlrealm.GabrielRealm.getUser(GabrielRealm.jav
> > a:260)
> > > at weblogic.security.acl.CachingRealm.getUserEntry(CachingRealm.java:832)
> > > at weblogic.security.acl.CachingRealm.getUser(CachingRealm.java:696)
> > > at weblogic.security.acl.Security.getCurrentUser(Security.java:250)
> > > at
> > weblogic.servlet.security.internal.SecurityModule.auditPerm(SecurityModule.j
> > ava:356)
> > > at
> > weblogic.servlet.security.internal.ServletSecurityManager.checkAccess(Servle
> > tSecurityManager.java:205)
> > > at
> > weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
> > ntext.java:2518)
> > > at
> weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
> > :2260)
> > > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > >
> > >
> > > Thanks for any help.
> > >
> > > Rich
-
Problem with Folio Builder - added articles are "spinning"
Hello,
today we are experiencing strange problems with Folio Builder. We are adding new artcles to folio created today and all added articles have same issue - spinning wheel in folio builder. Such articles we can't see in Content viewer until we delete existing folio.
Thanks for helpHi,
Could be that there was a network problem when uploading the InDesign documents.
Try to select the articles and delete them with the trashcan. And then reupload the documents from InDesign.
Good luck! -
Problem with weblogic.Deployer in 8.1
I have a problem with weblogic.Deployer. My application deploys and works fine
if I manually copy the ear or the exploded form into weblogic's applications\
directory (hot deployment). But, if I use the weblogic.Deployer tool, it fails
with the following exception. Does the deployer tool expect something in the ear
(or exploded form) that I'm missing? Thanks in advance.
-Vas
[wldeploy] java.lang.NullPointerException
[wldeploy] at weblogic.rmi.internal.StubGenerator.getStubOnClient(StubGener
ator.java:785)
[wldeploy] at weblogic.rmi.internal.StubGenerator.getStubClass(StubGenerato
r.java:758)
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:803)
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:790)
[wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
79)
[wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
rviceStub.java:50)
[wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
.java:152)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
otely(WLInitialContextFactoryDelegate.java:597)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
nitialContextFactoryDelegate.java:534)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
itialContextFactoryDelegate.java:336)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
xt(WLInitialContextFactoryDelegate.java:308)
[wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
[wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
143)
[wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
BeanHomeTool.java:157)
[wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
[wldeploy] at weblogic.Deployer.main(Deployer.java:399)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
.java:209)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
va:170)
[wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
va:166)
[wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
[wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
[wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
[wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
[wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
[wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
[wldeploy] --------------- nested within: ------------------
[wldeploy] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[ Failed
to generate class for weblogic.common.internal.RMIBootServiceImpl_811_WLStub ]
with nested exception:
[wldeploy] [java.lang.NullPointerException]
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:807)
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:790)
[wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
79)
[wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
rviceStub.java:50)
[wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
.java:152)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
otely(WLInitialContextFactoryDelegate.java:597)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
nitialContextFactoryDelegate.java:534)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
itialContextFactoryDelegate.java:336)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
xt(WLInitialContextFactoryDelegate.java:308)
[wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
[wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
143)
[wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
BeanHomeTool.java:157)
[wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
[wldeploy] at weblogic.Deployer.main(Deployer.java:399)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
.java:209)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
va:170)
[wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
va:166)
[wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
[wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
[wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
[wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
[wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
[wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
[wldeploy] java.lang.reflect.InvocationTargetException
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
.java:209)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
va:170)
[wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
va:166)
[wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
[wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
[wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
[wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
[wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
[wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
[wldeploy] Caused by: weblogic.utils.AssertionError: ***** ASSERTION FAILED ***
**[ Failed to generate class for weblogic.common.internal.RMIBootServiceImpl_811
_WLStub ] - with nested exception:
[wldeploy] [java.lang.NullPointerException]
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:807)
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:790)
[wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
79)
[wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
rviceStub.java:50)
[wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
.java:152)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
otely(WLInitialContextFactoryDelegate.java:597)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
nitialContextFactoryDelegate.java:534)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
itialContextFactoryDelegate.java:336)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
xt(WLInitialContextFactoryDelegate.java:308)
[wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
[wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
143)
[wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
BeanHomeTool.java:157)
[wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
[wldeploy] at weblogic.Deployer.main(Deployer.java:399)
[wldeploy] ... 15 moreHi Deepak,
I didn't understand the suggested resolution. Can you tell me what it means?
However, I found a similar problem in the archives, so I tried from command line
(outside ant) using "java weblogic.Delployer ...." and it worked! It doesn't work
from ant. So, you think there's some conflict between my ant and weblogic's ant
task "WLDdeploy"?
Thanks,
Vas
"Deepak Vohra" <[email protected]> wrote:
>
Refer to
http://e-docs.bea.com/wls/docs70/notes/resolved.html#1296363
"vas pulipati" <[email protected]> wrote:
I have a problem with weblogic.Deployer. My application deploys andworks
fine
if I manually copy the ear or the exploded form into weblogic's applications\
directory (hot deployment). But, if I use the weblogic.Deployer tool,
it fails
with the following exception. Does the deployer tool expect something
in the ear
(or exploded form) that I'm missing? Thanks in advance.
-Vas
[wldeploy] java.lang.NullPointerException
[wldeploy] at weblogic.rmi.internal.StubGenerator.getStubOnClient(StubGener
ator.java:785)
[wldeploy] at weblogic.rmi.internal.StubGenerator.getStubClass(StubGenerato
r.java:758)
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:803)
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:790)
[wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
79)
[wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
rviceStub.java:50)
[wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
.java:152)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
otely(WLInitialContextFactoryDelegate.java:597)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
nitialContextFactoryDelegate.java:534)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
itialContextFactoryDelegate.java:336)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
xt(WLInitialContextFactoryDelegate.java:308)
[wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
[wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
143)
[wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
BeanHomeTool.java:157)
[wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
[wldeploy] at weblogic.Deployer.main(Deployer.java:399)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
.java:209)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
va:170)
[wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
va:166)
[wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
[wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
[wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
[wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
[wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
[wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
[wldeploy] --------------- nested within: ------------------
[wldeploy] weblogic.utils.AssertionError: ***** ASSERTION FAILED *****[
Failed
to generate class for weblogic.common.internal.RMIBootServiceImpl_811_WLStub
with nested exception:
[wldeploy] [java.lang.NullPointerException]
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:807)
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:790)
[wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
79)
[wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
rviceStub.java:50)
[wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
.java:152)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
otely(WLInitialContextFactoryDelegate.java:597)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
nitialContextFactoryDelegate.java:534)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
itialContextFactoryDelegate.java:336)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
xt(WLInitialContextFactoryDelegate.java:308)
[wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
[wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
143)
[wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
BeanHomeTool.java:157)
[wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
[wldeploy] at weblogic.Deployer.main(Deployer.java:399)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
.java:209)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
va:170)
[wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
va:166)
[wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
[wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
[wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
[wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
[wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
[wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
[wldeploy] java.lang.reflect.InvocationTargetException
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
[wldeploy] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAcces
sorImpl.java:39)
[wldeploy] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMet
hodAccessorImpl.java:25)
[wldeploy] at java.lang.reflect.Method.invoke(Method.java:324)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.invokeMain(WLDeploy
.java:209)
[wldeploy] at weblogic.ant.taskdefs.management.WLDeploy.execute(WLDeploy.ja
va:170)
[wldeploy] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.ja
va:166)
[wldeploy] at org.apache.tools.ant.Task.perform(Task.java:319)
[wldeploy] at org.apache.tools.ant.Target.execute(Target.java:309)
[wldeploy] at org.apache.tools.ant.Target.performTasks(Target.java:336)
[wldeploy] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[wldeploy] at org.apache.tools.ant.Project.executeTargets(Project.java:1250
[wldeploy] at org.apache.tools.ant.Main.runBuild(Main.java:610)
[wldeploy] at org.apache.tools.ant.Main.start(Main.java:196)
[wldeploy] at org.apache.tools.ant.Main.main(Main.java:235)
[wldeploy] Caused by: weblogic.utils.AssertionError: ***** ASSERTION
FAILED ***
**[ Failed to generate class for weblogic.common.internal.RMIBootServiceImpl_811
_WLStub ] - with nested exception:
[wldeploy] [java.lang.NullPointerException]
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:807)
[wldeploy] at weblogic.rmi.internal.StubGenerator.generateStub(StubGenerato
r.java:790)
[wldeploy] at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:
79)
[wldeploy] at weblogic.common.internal.RMIBootServiceStub.getStub(RMIBootSe
rviceStub.java:50)
[wldeploy] at weblogic.security.acl.internal.Security.authenticate(Security
.java:152)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRem
otely(WLInitialContextFactoryDelegate.java:597)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLI
nitialContextFactoryDelegate.java:534)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLIn
itialContextFactoryDelegate.java:336)
[wldeploy] at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialConte
xt(WLInitialContextFactoryDelegate.java:308)
[wldeploy] at weblogic.jndi.Environment.getContext(Environment.java:164)
[wldeploy] at weblogic.jndi.Environment.getInitialContext(Environment.java:
143)
[wldeploy] at weblogic.management.deploy.utils.MBeanHomeTool.getMBeanHome(M
BeanHomeTool.java:157)
[wldeploy] at weblogic.Deployer.runBody(Deployer.java:555)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:146)
[wldeploy] at weblogic.utils.compiler.Tool.run(Tool.java:103)
[wldeploy] at weblogic.Deployer.main(Deployer.java:399)
[wldeploy] ... 15 more -
Strange problem with my build JAR
Hiii everybody... I'm having a strange problem with my build (JAR file)... when I work with the Eclipse and I click in the table that returns the clients stored in my PostGre database it works fine, but when I build my application and it generates my JAR file and I open it and click in the same table to return the objects that I have.. it does not appears anymore.. just show when I work with eclipse... and the database is the same for both.
I already checked the database path in my properties file... and the application recognize the database because I can login and there isn't any runtime exception...
In that application I work with Hibernate and Spring... for me it is very strange because the application works fine when I run by eclipse... but does not return the database data when I click on my Jar file to open the application..
Someone can help me with that?
I dont know if the problem is in the Spring, Hibernate, Libraries...
thanks in advance...So what's the error then? Are there any error messages? Have you checked the console? Or are you just clicking on the jar and you wouldn't even see the errors if there are any?
What do the logs say?
You're not giving a lot to work on here. -
Problem with Vision Builder and LabView: Error -1074395995, File not found
I have created an inspection with Vision Builder AI 2009 SP1. In it I load some pictures from the HDD and run some checks over it. It works fine. Then I have migrated it to LabView 2010, I get a message that the migration is successfull, but when I run the VI on LabView I get a fail status. I have been checking my program and I have found and error when I try to load the picture from file: Error -1074395995 occurred at IMAQ ReadImageAndVisionInfo
Possible reason(s): IMAQ Vision: File not found.
But I am not sure which file it refers to. At first I thought it was the picture I wanted to load, but I have checked the path and it is correct, so maybe it refers to another thing. What puzzles me most is that it works perfectly on Vision Builder and I have changed nothing in LabView, maybe it is a problem with the migration. Any clues?Here's a screenshot of what I'm talking about. Put a break point here and see what the path is and compare that with what Vision Builder AI is using (described where to find this in the previous post). You could find where this global is used to make debugging easier.
Hope this helps,
Brad
Attachments:
Generated Code.png 43 KB -
ACS problems with Windows 2K3 SP1
We are facing problems with ACS when we install SP1 on the ACS Server on Windows 2k3 Ent Edition.
After SP1 is installed, ACS admin web interface hangs whenever a AAA client is added or NDG is added/deleted/modified.
It hangs on some other changes as well but the NDG/AAA client is a confirmed to hang after the change.
ACS is running on a Dual-Core Dual Processor machine. The problem is not present on a single processor machine.
ACS ver. is 4.0(1) (Build 27)
Any help will be greatly appreciated.ACS ver 4.1 has been tested with Dual Processor. Check out the release notes,
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/acs41/rnotes/rnacs41.htm#wp140886
Regards, -
Problem with WebLogic 10.3.3, Apache 2.2.3 and WebLogic Apache proxy plugin
I have a problem with using Apache 2.2.3 as a WebLogic SSL proxy. I have Apache 2.2 running and successfully configured an SSL cert, config in ssl.conf is...
<VirtualHost secure.daftdonkey.com>
# Setup SSL for secure.daftdonkey.com
ServerName secure.daftdonkey.com
SSLEngine On
SSLCertificateFile /oracle/secure/secure.daftdonkey.com.crt
SSLCertificateKeyFile /oracle/secure/secure.daftdonkey.com.key
SSLCertificateChainFile /oracle/secure/gd_bundle.crt
</VirtualHost>
This works fine
Now I want Apache to proxy requests to my WebLogic Server and secure them over SSL as well
e.g. a request to https://secure.daftdonkey.com/service goes to https://weblogic.internal.site/service
I have downloaded and configured the weblogic module and tested it handling traffic for HTTP and that worked, then I switched the WebLogic module to use SSL.
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
WebLogicHost weblogic.internal.site
WebLogicPort 16101
Debug ALL
SecureProxy ON
WLSSLWallet /oracle/secure/my-wallet
WLLogFile /tmp/wl-proxy.log
</IfModule>
<Location /service>
SetHandler weblogic-handler
</Location>
Starting Apache throws the error. I think this is my main problem, i've searched support.oracle.com and not found anything.
[Mon Jun 07 23:00:48 2010] [crit] (20014)Internal error: WL SSL Init failed for server: (null) on 0
but Apache starts... I get this error when I make a request to https://secure.daftdonkey.com/service
Failure of server APACHE bridge:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
Looking into the log /tmp/wl-proxy.log I see....
Mon Jun 7 22:30:10 2010 <393212759749971> URLfactory Created
Mon Jun 7 22:30:10 2010 <393312759750102> ================New Request: [GET /service HTTP/1.1] =================
Mon Jun 7 22:30:10 2010 <393312759750102> INFO: SSL is configured
Mon Jun 7 22:30:10 2010 <393312759750102> Using Uri /service
Mon Jun 7 22:30:10 2010 <393312759750102> After trimming path: '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> The final request string is '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: Socket Address hostnames 'weblogic.internal.site:16101'
Mon Jun 7 22:30:10 2010 <393312759750102> Host extracted from serverlist is [weblogic.internal.site]
Mon Jun 7 22:30:10 2010 <393312759750102> parseServerList: IP from socket Address [192.168.100.15]
Mon Jun 7 22:30:10 2010 <393312759750102> Initializing lastIndex=0 for a list of length=1
Mon Jun 7 22:30:10 2010 <393312759750102> getListNode: created a new server node: id='weblogic.internal.site:16101' server_name='secure.daftdonkey.com', port='443'
Mon Jun 7 22:30:10 2010 <393312759750102> attempt #0 out of a max of 5
Mon Jun 7 22:30:10 2010 <393312759750102> Trying a pooled connection for '192.168.100.15/16101/16101'
Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: found a host and port/securePort match
Mon Jun 7 22:30:10 2010 <393312759750102> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16101] SecurePort[16101]
Mon Jun 7 22:30:10 2010 <393312759750102> general list: trying connect to '192.168.100.15'/16101/16101 at line 3188 for '/service'
Mon Jun 7 22:30:10 2010 <393312759750102> SSL is not configured for this connection
Mon Jun 7 22:30:10 2010 <393312759750102> Local Port of the socket is 45580
Mon Jun 7 22:30:10 2010 <393312759750102> Remote Host 192.168.100.15 Remote Port 16101
Mon Jun 7 22:30:10 2010 <393312759750102> URL::connect SSLConn for reader is not set as it is NULL
Mon Jun 7 22:30:10 2010 <393312759750102> general list: created a new connection to '192.168.100.15'/16101 for '/service', Local port:0
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Keep-Alive]=[300]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs from clnt:[Connection]=[keep-alive]
Mon Jun 7 22:30:10 2010 <393312759750102> parse_header is done
Mon Jun 7 22:30:10 2010 <393312759750102> Method is GET
Mon Jun 7 22:30:10 2010 <393312759750102> About to call parseHeaders
Mon Jun 7 22:30:10 2010 <393312759750102> URL::parseHeaders: Value of parsedHeaders = [0]
Mon Jun 7 22:30:10 2010 <393312759750102> URL::sendHeaders(): meth='GET' file='/service' protocol='HTTP/1.1'
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Keep-Alive]=[300]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Connection]=[Keep-Alive]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-SSL]=[true]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 7 22:30:10 2010 <393312759750102> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): first=0 last=0 toRead=4096
Mon Jun 7 22:30:10 2010 <393312759750102> Reader::fill(): sysRecv returned -1
Mon Jun 7 22:30:10 2010 <393312759750102> *******Exception type [READ_ERROR_FROM_SERVER] (socket read failure) raised at line 251 of ../nsapi/Reader.cpp
Mon Jun 7 22:30:10 2010 <393312759750102> caught exception in readStatus: READ_ERROR_FROM_SERVER [os error=104, line 251 of ../nsapi/Reader.cpp]: socket read failure at line 963
Mon Jun 7 22:30:10 2010 <393312759750102> PROTOCOL_ERROR: Backend Server not responding - isRecycled:0
Mon Jun 7 22:30:10 2010 <393312759750102> Marking 192.168.100.15:16101 as bad
Mon Jun 7 22:30:10 2010 <393312759750102> got exception in sendRequest phase: Backend Server not responding at line 3702
Mon Jun 7 22:30:10 2010 <393312759750102> Failing over after sendRequest() exception: PROTOCOL_ERROR as Idempotent is set to ON
Mon Jun 7 22:30:10 2010 <393312759750102> attempt #1 out of a max of 5
However connecting directly to https://192.168.100.15:16101/irm_rights is successful.
Ouput from orapki seems to show a valid wallet.
[root@content my-wallet]# /oracle/install/bin/orapki wallet display -wallet /oracle/secure/my-wallet/
Oracle PKI Tool : Version 11.1.1.2.0
Copyright (c) 2004, 2009, Oracle and/or its affiliates. All rights reserved.
Requested Certificates:
User Certificates:
Trusted Certificates:
Subject: OU=Class 2 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Secure Server Certification Authority,O=RSA Data Security\, Inc.,C=US
Subject: OU=Class 3 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: OU=Class 1 Public Primary Certification Authority,O=VeriSign\, Inc.,C=US
Subject: CN=weblogic.internal.site,OU=FOR TESTING ONLY,O=MyOrganization,L=MyTown,ST=MyState,C=US
Subject: CN=GTE CyberTrust Global Root,OU=GTE CyberTrust Solutions\, Inc.,O=GTE Corporation,C=US
Also the apache log at /var/log/httpd/ssl_error_log shows.
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
[Mon Jun 07 23:59:03 2010] [error] [client 192.168.100.245] ap_proxy: trying GET /service/ at backend host '192.168.100.15/16101; got exception 'Backend Server not responding'
Editing the httpd.conf and sending traffic from Apache to WebLogic over regular HTTP works, config is...
LoadModule weblogic_module modules/mod_wl.so
<IfModule mod_weblogic.c>
WebLogicHost weblogic.internal.site
WebLogicPort 16100
Debug ALL
# SecureProxy ON
# WLSSLWallet /oracle/secure/my-wallet
WLLogFile /tmp/wl-proxy.log
</IfModule>
Resulting detail from /tmp/wl-proxy.log
Mon Jun 7 23:20:50 2010 <415912759780351> URLfactory Created
Mon Jun 7 23:20:50 2010 <416012759780502> ================New Request: [GET /service/ HTTP/1.1] =================
Mon Jun 7 23:20:50 2010 <416012759780502> Using Uri /service/
Mon Jun 7 23:20:50 2010 <416012759780502> After trimming path: '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> The final request string is '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: Socket Address hostnames 'weblogic.internal.site:16100'
Mon Jun 7 23:20:50 2010 <416012759780502> Host extracted from serverlist is [weblogic.internal.site]
Mon Jun 7 23:20:50 2010 <416012759780502> parseServerList: IP from socket Address [192.168.100.15]
Mon Jun 7 23:20:50 2010 <416012759780502> Initializing lastIndex=0 for a list of length=1
Mon Jun 7 23:20:50 2010 <416012759780502> getListNode: created a new server node: id='weblogic.internal.site:16100' server_name='secure.daftdonkey.com', port='443'
Mon Jun 7 23:20:50 2010 <416012759780502> attempt #0 out of a max of 5
Mon Jun 7 23:20:50 2010 <416012759780502> Trying a pooled connection for '192.168.100.15/16100/16100'
Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: found a host and port/securePort match
Mon Jun 7 23:20:50 2010 <416012759780502> getPooledConn: No more connections in the pool for Host[192.168.100.15] Port[16100] SecurePort[16100]
Mon Jun 7 23:20:50 2010 <416012759780502> general list: trying connect to '192.168.100.15'/16100/16100 at line 3188 for '/service/'
Mon Jun 7 23:20:50 2010 <416012759780502> SSL is not configured for this connection
Mon Jun 7 23:20:50 2010 <416012759780502> Local Port of the socket is 56647
Mon Jun 7 23:20:50 2010 <416012759780502> Remote Host 192.168.100.15 Remote Port 16100
Mon Jun 7 23:20:50 2010 <416012759780502> URL::connect SSLConn for reader is not set as it is NULL
Mon Jun 7 23:20:50 2010 <416012759780502> general list: created a new connection to '192.168.100.15'/16100 for '/service/', Local port:0
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Host]=[secure.daftdonkey.com]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Encoding]=[gzip,deflate]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Keep-Alive]=[300]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Connection]=[keep-alive]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from clnt:[Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> parse_header is done
Mon Jun 7 23:20:50 2010 <416012759780502> Method is GET
Mon Jun 7 23:20:50 2010 <416012759780502> About to call parseHeaders
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: Value of parsedHeaders = [0]
Mon Jun 7 23:20:50 2010 <416012759780502> URL::sendHeaders(): meth='GET' file='/service/' protocol='HTTP/1.1'
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Host]=[secure.daftdonkey.com]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [User-Agent]=[Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.9) Gecko/20100315 Firefox/3.5.9 ( .NET CLR 3.5.30729)]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept]=[text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Language]=[en-us,en;q=0.5]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Encoding]=[gzip,deflate]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Accept-Charset]=[ISO-8859-1,utf-8;q=0.7,*;q=0.7]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Keep-Alive]=[300]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Cookie]=[JSESSIONID=YF4nMNfZ3lJ5ZrVV9HGpKwj3hf12yRvlf4zksQf6pkKx2LhJ2ywY!34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Connection]=[Keep-Alive]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-SSL]=[true]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [WL-Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [Proxy-Client-IP]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-Forwarded-For]=[192.168.100.245]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-KeepAliveSecs]=[30]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to WLS: [X-WebLogic-Force-JVMID]=[unset]
Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): first=0 last=0 toRead=4096
Mon Jun 7 23:20:50 2010 <416012759780502> Reader::fill(): sysRecv returned 568
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: CompleteStatusLine set to [HTTP/1.1 302 Moved Temporarily]
Mon Jun 7 23:20:50 2010 <416012759780502> URL::parseHeaders: StatusLine set to [302 Moved Temporarily]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Transfer-Encoding]=[chunked]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-WebLogic-JVMID]=[34167467]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs from WLS:[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Mon Jun 7 23:20:50 2010 <416012759780502> parsed all headers OK
Mon Jun 7 23:20:50 2010 <416012759780502> done with sendRequest
Mon Jun 7 23:20:50 2010 <416012759780502> sendResponse() : r->status = '302'
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Date]=[Tue, 08 Jun 2010 06:20:50 GMT]
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[Location]=[https://secure.daftdonkey.com/service/faces/LoginPage.jspx]
Mon Jun 7 23:20:50 2010 <416012759780502> for 192.168.100.15/16100/16100, updated JVMID: 34167467
Mon Jun 7 23:20:50 2010 <416012759780502> Hdrs to client (add):[X-Powered-By]=[Servlet/2.5 JSP/2.1]
Mon Jun 7 23:20:50 2010 <416012759780502> calling closeConn() with non-null URL* at 3826
Mon Jun 7 23:20:50 2010 <416012759780502> canRecycle: conn=1 status=302 isKA=1 clen=-1 isCTE=1
Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling for '192.168.100.15/16100'
Mon Jun 7 23:20:50 2010 <416012759780502> closeConn: pooling '0'
Mon Jun 7 23:20:50 2010 <416012759780502> request [irm_rights/] processed successfully..................
Mon Jun 7 23:20:50 2010 <415912759780351> Cleaning up the list node 'weblogic.internal.site:16100'list Length '1'I found the answer to this. The documentation is not clear enough, LD_LIBRARY_PATH MUST be set and MUST have a pointer to the directory where the SSL .so modules are. I wrote up a blog article explaining the configuration and detailed this issue.
http://blogs.oracle.com/irm/2010/06/quick_guide_to_oracle_irm_11g_1.html -
Problem with Application build in JDeveloper 11.1.5 to WLS 10.3.5
Hi to everyone, I have a problem with a application build in JDeveloper 11.1.5 and deployed to a standalone WLS 10.3.5 ( with the JRF template appliied , to run adf applications )
When I try access to the page : localhost:7001/myApp , it show me :
"Error 403 Fordbbiben ".
but when I put :
localhost:7001/myApp/index.jspx, it show me :
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
and the log is :
<May 8, 2012 9:06:22 PM BOT> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <BEA-000000> <
java.lang.IllegalStateException: The expression "#{bindings.genRegion.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "genRegion_dlg") evaluated to null.
This is typically due to an error in the configuration of the objects referenced by this expression.
If it helps, the expression "#{bindings.genRegion}" evaluates to "null".
If it helps, the expression "#{bindings}" evaluates to "null". Now using an empty RegionModel instead.
at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:450)
at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:682)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:498)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
What can I do to fix the problem ??
ThanksAnalyzing the problem, I created a new ADF application with only a web page (index.jspx) , and deploy it to the WLS, and I access to URL of page and it runs !! ( http:localhost:7001/myApp/faces/index.jspx ).
But, when I ADD A TASK FLOW to the application and deploy to the WLS newly , and try to access to the URL application's ( http:localhost:7001/myApp/faces/index.jspx ) . It show me again :
Error 500--Internal Server Error
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.5.1 500 Internal Server Error
The server encountered an unexpected condition which prevented it from fulfilling the request.
and the log is :
<May 10, 2012 19:02:57 PM BOT> <Warning> <oracle.adf.view.rich.component.fragment.UIXRegion> <BEA-000000> <
java.lang.IllegalStateException: The expression "#{bindings.genRegion.regionModel}" (that was specified for the RegionModel "value" attribute of the region component with id "genRegion_dlg") evaluated to null.
This is typically due to an error in the configuration of the objects referenced by this expression.
If it helps, the expression "#{bindings.genRegion}" evaluates to "null".
If it helps, the expression "#{bindings}" evaluates to "null". Now using an empty RegionModel instead.
at oracle.adf.view.rich.component.fragment.UIXRegion.getRegionModel(UIXRegion.java:450)
at oracle.adf.view.rich.component.fragment.UIXRegion._beginInterruptibleRegion(UIXRegion.java:682)
at oracle.adf.view.rich.component.fragment.UIXRegion.processRegion(UIXRegion.java:498)
at oracle.adfinternal.view.faces.taglib.region.RegionTag.doStartTag(RegionTag.java:127)
Why it show me that error when I ADD a Task Flow to the Application ???
Can Anyone help me please ?? I m varios days with this problem. Thanks -
Problems with report builder 3.0 in SCCM 2012 R2 CU2
Hi All
I have problems with editing (Using Report builder) existing reports or creating new ones in SCCM 2012 R2 CU2
We version of SQL we use is SQL 2008 R2 SP2
I already asked this question in the SCCM 2012 forum but the problem is not related to SCCM but has something to do with application report builder
I changed the registry key and edited the Microsoft.ConfigurationManagement.exe.config.xml as described in the following link
http://blogs.technet.com/b/smartinez/archive/2012/07/03/system-center-2012-configuration-manager-create-report-don-t-work-what-do-i-do-now.aspx
Afterwards I try to edit an report I see report builder is being downloaded and after it generates the following error “Application did not succeed. Unable to continue”
Error details are
Following errors were detected during this operation.
* [22-7-2014 13:55:07] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, Hash hash)
at System.Deployment.Application.ComponentVerifier.VerifyFileHash(String filePath, HashCollection hashCollection)
at System.Deployment.Application.ComponentVerifier.VerifyComponents()
at
System.Deployment.Application.DownloadManager.DownloadDependencies(SubscriptionState subState, AssemblyManifest deployManifest, AssemblyManifest appManifest, Uri sourceUriBase, String targetDirectory, String group, IDownloadNotification notification, DownloadOptions
options)
at System.Deployment.Application.ApplicationActivator.DownloadApplication(SubscriptionState subState, ActivationDescription actDesc, Int64 transactionId, TempDirectory& downloadTemp)
at System.Deployment.Application.ApplicationActivator.InstallApplication(SubscriptionState& subState, ActivationDescription actDesc)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
And in the SmsAdminUI.log I noticed the following error
[16, PID:4460][07/21/2014 14:11:43] :[ReportProxy] - User-specified default Reporting Point [Server1.local.nl] could not be found, [Server2.local.nl] is now the default Reporting Point.
[1, PID:4460][07/21/2014 14:11:11] :System.InvalidOperationException\r\nThere is an error in XML document (1, 1).\r\n at System.Xml.Serialization.XmlSerializer.Deserialize(XmlReader xmlReader, String encodingStyle, XmlDeserializationEvents events)
I removed the reporting point no luck -> I already installed report builder 3.0 local on my computer still no luck.
I hope someone can give me some advice , I am lost with this error
Thx in advance
Regards
JohanHi Miss Katherine,
1. I went through the SQL steps in the link you posted
2. I updated the Reg Key and Microsoft.ConfigurationManagement.exe.config file with 3.0 on both the
server and the console machine.
3. I copied the .DLL file from your OneDrive and replaced the existing one on the server.
4. I uninstalled and re-installed the reporting role on the server and received the 1015 in the log.
5. I restarted the server and the client machine
I do get a slightly different error now after using the new DLL
Errors With Original DLL
ERROR DETAILS
* [9/30/2014 8:42:03 AM] System.Deployment.Application.InvalidDeploymentException (HashValidation)
- File, Microsoft.DataWarehouse.dll, has a different computed hash than specified in manifest.
- Source: System.DeploymentERROR DETAILS
Errors With New DLL
ERROR DETAILS
Following errors were detected during this operation.
* [9/30/2014 9:17:13 AM] System.Deployment.Application.InvalidDeploymentException (RefDefValidation)
- Reference in the manifest does not match the identity of the downloaded assembly Microsoft.DataWarehouse.dll.
- Source: System.Deployment -
Oracle 8.1.5 database connection problem with WebLogic 5.1
Hello,
the NSAPI integration works, also the JSP files.
But I have still problems with the Jdriver for my Oracle 8.1.5.
I get the message :
Failed to invoke startup class
weblogic.jdbc.common.internal.JdbcStartup=weblogic.jdbc.common.internal.JdbcStartup
when the WebLogic Server is started.
Any ideas or hints about that?
Thanks in advance
ArminPost the full stacktrace here
Also you might want to post jdbc related questions to weblogic.developer.
interest.jdbc
Kumar
DreamNEON wrote:
Hello,
the NSAPI integration works, also the JSP files.
But I have still problems with the Jdriver for my Oracle 8.1.5.
I get the message :
Failed to invoke startup class
weblogic.jdbc.common.internal.JdbcStartup=weblogic.jdbc.common.internal.JdbcStartup
when the WebLogic Server is started.
Any ideas or hints about that?
Thanks in advance
Armin -
BIG5 Problem with WebLogic Express 6.1
Hi,
I found some problem with Chinese Big5 when using JSP. All big5 code convert in
a wrong format and can't view by browser.
My server setting is:
OS: Solaris 8
Weblogic: Express 6.1
JDK 1.3.1
Anyone know how to solve this problem?
I have tried different way like creating a new string in different encoding type.
Actually the BIG5 work fine with Solaris 8, JDK1.2.2_05a and Weblogic 5.1. However
I WEblogic 6.1 only support JDK1.3 or above. Anyone can help me out. Thanks.
Pls email me at [email protected]
The download binary is the same for WL Full version and WL Express. It's the
license that matters. Contact BEA to obtain / buy a WL Express license.
Ben
"Rajendra" <[email protected]> wrote in message
news:[email protected]..
We have WebLogic 6.1 licensed software. I need to work with WebLogic
Express.
I installed on win2K using the installer available with the CD. Now, what
exactly do I need to do (restricting license..) to work with WebLogic
Express?
I need this info urgently. Any help in this regard is greatlyappreciated.
>
Thanks
Rajendra.
"Michael" <[email protected]> wrote in message
news:[email protected]..
Hi.
WebLogic Express is WebLogic Server with a different license that limits
some of
the WebLogic Server features, such as EJB. Downloading WLS effectively
downloads
WebLogic Express.
Regards,
Michael
raj wrote:
Hi,
does anyone know if it's possible to download weblogic express 6.1 ? icouldn't
find any link on the bea website.
thanks
Raj -
Problems with the build-IN SNTP-Client on cRIO9014&cRIO9012
Hi out there,
I have a problem using the build-IN SNTP-Client of a cRIO-9014 (and a cRIO-9012).
It seems that the cRIO sometimes gets another time (e.g. 28.01.1920 12:03:00) other than it should get (e.g. 31.08.2014 09:59:00).
I've found this problem in our measurement-files. They had some unusual timestamps (as showed in the following example).
To prevent the SNTP-Client from doing too many damages to our measurement-files, I built a time-validator (with a range of 5 min), which checks one of my servers (and let it write every time change to a log file).
The Log-File looks like (Where "$Message" is a custom-message. It is unrelated to the problem, but occurs every minute):
31.08.2014 09:58:00 $Message
31.08.2014 09:59:00 $Message
31.08.2014 10:20:00 Setting Time from 28.01.1920 12:14:09 to: 31.08.2014 10:20:00
31.08.2014 10:21:00 $Message
31.08.2014 10:22:00 $Message
31.08.2014 10:54:00 $Message
31.08.2014 10:55:00 $Message
31.08.2014 10:59:00 $Message
31.08.2014 11:00:00 $Message
As you can see, the cRIO loses its time somewhere between 09:59:00 and 10:00:00(UTC) and it has been set back at 10:58:XX (UTC). It is shown with the gap between the messages at 10:55:00 and 10:59:00.
The configuration for the timesync was:
[TIME SYNC]
source.rtc.enable=True
source_priority=sntp;rtc;
source.sntp.enable=true
source.sntp.address=192.53.103.108
source.sntp.interval=60
source.sntp.port=123
source.sntp.verbose=false
source.sntp.log=false
sntp.address is a public German time-server, hosted by our national institute.
I've set sntp.verbose and sntp.log to TRUE for more information, but have to wait some time for a logfile.
The network has the following scheme:
cRIO -> UMTS-Modem -> ISP-VPN -> Internet
Does anyone have had this problem and/or know, how to fix it?
Thanks for your help!
CaterosHi!
The problem happens sporadically, at first, we didn't even notice it, just that there are files missing and we got the strange logs. Now, with the workaround, we can finally trace the problem (and in some cases restore our measurement).
What do you mean with "connectthe cRIO directly to a router?"? Could you please explain it?
In the enclosure are more networkdevices, but only the cRIO uses the connection to the internet.
The "UMTS Modem" has also routing capacities, which we use to remote control both of the RIOs.
Thanks for your reply
Cateros -
Problem with weblogic server help me...!
HI,
i have developed and application that was deployed successfully in Tomcat 5.0, but it was not with weblogic 8...
plz help me... thanks in advance..In this case, I would call the OP up from asking a stupid question, with no details at all, rather than Soultech for responding to it in humorous manner.
Hence why I included that link to "How to ask smart questions"
"It doesn't work on Weblogic" will not get any helpful responses
WHAT doesn't work?
Is there an error message?
What have you tried?
The onus is on the OP to post a clear and concise description of his problem, along with error messages/stack traces, anything else that may help diagnose the issue.
I believe Soultechs post was justified, if a little short. -
Problem with weblogic.deploy and cluster
I'm having some problems with the weblogic.deploy class when trying to refresh
a jsp file. Using the following command to redeploy the entire application works
fine:
java weblogic.deploy -port 9876 -host apptest01 update
administrator portal c:\portal-site
However using the following command to refresh just one jsp
file:
java weblogic.deploy -url t3://apptest01:9876 -username system
-jspRefreshFiles ./index.jsp -jspRefreshComponentName portal
refresh administrator portal
produces the following stack trace:
javax.naming.NameNotFoundException: Unable to resolve
weblogic.management.home.olbcluster.
Resolved: 'weblogic.management.home' Unresolved:'olbcluster' ;
remaining name ''
at weblogic.rmi.internal.BasicOutboundRequest.
sendReceive(BasicOutboundRequest.java:85)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.
invoke(ReplicaAwareRemoteRef.java:255)
at weblogic.rmi.cluster.ReplicaAwareRemoteRef.
invoke(ReplicaAwareRemoteRef.java:222)
at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
at $Proxy0.lookup(Unknown Source)
at weblogic.jndi.internal.WLContextImpl.
lookup(WLContextImpl.java:323)
at weblogic.management.tools.WebAppComponentRefreshTool.
getMBeanHomeForManagedServer
WebAppComponentRefreshTool.java:498)
at weblogic.management.tools.
WebAppComponentRefreshTool.
getComponentMBeanForServer
(WebAppComponentRefreshTool.java:225)
at weblogic.management.tools.
WebAppComponentRefreshTool.findInternalPaths
(WebAppComponentRefreshTool.java:187)
at weblogic.management.tools.WebAppComponentRefreshTool.
refresh(WebAppComponentRefreshTool.java:151)
at weblogic.deploy.refresh(deploy.java:704)
at weblogic.deploy.runBody(deploy.java:374)
at weblogic.utils.compiler.Tool.run(Tool.java:79)
at weblogic.deploy.main(deploy.java:1601)
Unable to resolve weblogic.management.home.olbcluster.
Resolved: 'weblogic.management.home' Unresolved:'olbcluster'
Any ideas?
"John Murphy" <[email protected]> wrote:
>
>I'm having some problems with the weblogic.deploy class when trying to
>refresh
>a jsp file. Using the following command to redeploy the entire application
>works
>fine:
>
>java weblogic.deploy -port 9876 -host apptest01 update
>administrator portal c:\portal-site
>
>However using the following command to refresh just one jsp
>file:
>
>java weblogic.deploy -url t3://apptest01:9876 -username system
>-jspRefreshFiles ./index.jsp -jspRefreshComponentName portal
>refresh administrator portal
>
>produces the following stack trace:
>
>javax.naming.NameNotFoundException: Unable to resolve
>weblogic.management.home.olbcluster.
>Resolved: 'weblogic.management.home' Unresolved:'olbcluster' ;
>remaining name ''
> at weblogic.rmi.internal.BasicOutboundRequest.
> sendReceive(BasicOutboundRequest.java:85)
> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.
> invoke(ReplicaAwareRemoteRef.java:255)
> at weblogic.rmi.cluster.ReplicaAwareRemoteRef.
> invoke(ReplicaAwareRemoteRef.java:222)
> at weblogic.rmi.internal.ProxyStub.invoke(ProxyStub.java:35)
> at $Proxy0.lookup(Unknown Source)
> at weblogic.jndi.internal.WLContextImpl.
> lookup(WLContextImpl.java:323)
> at weblogic.management.tools.WebAppComponentRefreshTool.
> getMBeanHomeForManagedServer
> WebAppComponentRefreshTool.java:498)
> at weblogic.management.tools.
> WebAppComponentRefreshTool.
> getComponentMBeanForServer
> (WebAppComponentRefreshTool.java:225)
> at weblogic.management.tools.
> WebAppComponentRefreshTool.findInternalPaths
> (WebAppComponentRefreshTool.java:187)
> at weblogic.management.tools.WebAppComponentRefreshTool.
> refresh(WebAppComponentRefreshTool.java:151)
> at weblogic.deploy.refresh(deploy.java:704)
> at weblogic.deploy.runBody(deploy.java:374)
> at weblogic.utils.compiler.Tool.run(Tool.java:79)
> at weblogic.deploy.main(deploy.java:1601)
>Unable to resolve weblogic.management.home.olbcluster.
>Resolved: 'weblogic.management.home' Unresolved:'olbcluster'
>
>Any ideas?
>
Hi John,
How's tricks?
It looks to me as though the olbcluster JNDI reference isn't being resolved from
the tree. A similar error results when a Connection Pool cannot be resolved, the
JNDI context env.jdbc is resolved but the particlar pool isn't. In my experience
it often turns out to be an error in the correlation between the deployment descriptors,
settings applied via the console and references made in the code.
That's my tuppence worth,
James :-)
Maybe you are looking for
-
Missing movies after Apple TV update
I have two Apple TVs - a 2nd gen one and a 3rd gen one. I also have about 30 movies in my iTunes movies library which, when I connect with that computer on either Apple TVs brings all the content across. However, since the update, most of that conten
-
Ipad 2 crashed twice in a week.ios7,hard reboot
original ipad 2 has crashed twice in the last week or so.Using ios7.03..Do not know what my wife,was using at the time,but it needed a hard reboot to start.
-
i have to delete a single char in a txt file. i'm working with this method: public static void remChar(File inFile, char charToRem) throws IOException{ if (!inFile.exists()) return; BufferedReader in = new BufferedReader(new FileReader(inFi
-
INCONSISTANCE CURRENCY INFORMATION
HI FRIENDS WHEN I AM POSTING TR6 CHALLAN THROUGH J1IH TRANSACTION CODE-HERE AFTER ENTERING DOCUMENT NO & PROCEEDING FOR SAVING SYSTEM IS GIVING THIS ERROR. THE DETAILS OF THE ERROR IS GIVING BELOW- Inconsistent currency information Mess
-
I have created Mirror like this: /dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no - /dev/md/dsk/d4 /dev/md/rdsk/d4 /export/home ufs 2 yes - /dev/md/dsk/d1 /dev/md/rdsk/d1 /opt ufs 2 yes - /dev/md/dsk