Problems activating imported objects in QA Int.directory
Hi
I had my XI Dev config objects exported and was able to import them using IB in the XI QA environment.
I made the specific settings in the comm channel for the QA environment - when I go to the "change lists" tab in the QA ID, under the XI 3.0 import list - I see the config objects that I had imported from dev environment.
Now , I pick up one of the config objects ( one of the business systems in the QA env ) to activate, I get an activation error - <b>Unable to move object - Change lists were not part of the same import</b>
I get the same error when I try to activate all imported config objects in one shot.
What am I missing here ?
Hi
I managed to solve this problem.
Before activating the imported QA config objects, I had created some new receiver determn objects in the QA ID,and these got stored under "Standard change list"
After this, I made changes to the comm channel defn that I imported from DEV and set it to the QA environment.
Then going to the activating tab,I tried to import the changes under the imported change list - XI 3.0 import. I got the error message that I originally described in this thread.
Now, I reject changes under change list "Standard change list" - then activate the changes under "XI 3.0 import" first, it goes through ok. Then, I created the new recv determinations that I wanted and was able to activate them successfully too !!!
Similar Messages
-
Problem when importing objects from SLD to IR
Hi
When i try to import any object from SLD into
IR i cant view all the components under Data Types Message Types Interface Mapping and other related nodes.Just the object gets imporetd but none of ts nodes are visible.
Please let me know if any change in configuration or settings is to be done.
Thanks in Advance>>Could you pls tell me the link in service.sap.com
https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20
search SAP basis 6.40
Regards,
Jai Shankar -
Problem when importing Configuration Objects in ID
Hi,
i have a problem, when importing configuration objects in my integration directory.
i have one development system and one corresponding quality assurance system.
in sld i have defined my business systems + groups + transport targets. the export works fine.
when trying to import the configuration objects in integration directory of QA i get the following failure.
#13 07:41:34 [AWT-EventQueue-0] ERROR com.sap.aii.utilxi.swing.toolkit.ExceptionDialog: Throwable
Thrown:
MESSAGE ID: com.sap.aii.ib.core.transport.api.TransportCsException
com.sap.aii.ib.core.transport.api.TransportCsException: java.lang.NullPointerException
at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:145)
at com.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
at com.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:127)
at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:709)
at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:365)
at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:154)
at com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:129)
at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730)
at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:105)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Serialized server exceptions:
MESSAGE ID: java.lang.NullPointerException (serialized)
java.lang.NullPointerException: java.lang.NullPointerException
at com.sap.aii.ibdir.server.sldaccess.gen.LDAccess.getMySAPIntegrationServerBusinessSystem(LDAccess.java:301) at com.sap.aii.ibdir.server.sldaccess.gen.LDAccess.getMyBusinessSystemGroup(LDAccess.java:243) at com.sap.aii.ibdir.server.sldaccess.gen.LDAccess.getBusinessSystemNameInMyGroup(LDAccess.java:173) at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.renameService(TransportPostprocessor.java:838) at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.renameService(TransportPostprocessor.java:732) at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:345) at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62) at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:211) at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:168) at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90) at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107) at com.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74) at com.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:127) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:709) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:365) at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:154) at com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:129) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:105) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
#12 07:41:34 [Pool-Thread-3] ERROR com.sap.aii.ib.gui.tools.transport.ConcurrentProgressDialog: Execution failed
Thrown:
MESSAGE ID: com.sap.aii.ib.core.transport.api.TransportCsException
com.sap.aii.ib.core.transport.api.TransportCsException: java.lang.NullPointerException
at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:145)
at com.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74)
at com.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:127)
at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:709)
at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:365)
at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:154)
at com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:129)
at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730)
at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:105)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:215)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Serialized server exceptions:
MESSAGE ID: java.lang.NullPointerException (serialized)
java.lang.NullPointerException: java.lang.NullPointerException
at com.sap.aii.ibdir.server.sldaccess.gen.LDAccess.getMySAPIntegrationServerBusinessSystem(LDAccess.java:301) at com.sap.aii.ibdir.server.sldaccess.gen.LDAccess.getMyBusinessSystemGroup(LDAccess.java:243) at com.sap.aii.ibdir.server.sldaccess.gen.LDAccess.getBusinessSystemNameInMyGroup(LDAccess.java:173) at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.renameService(TransportPostprocessor.java:838) at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.renameService(TransportPostprocessor.java:732) at com.sap.aii.ibdir.server.transport.impl.postprocessing.TransportPostprocessor.postprocessTransport(TransportPostprocessor.java:345) at com.sap.aii.ibdir.server.transport.impl.postprocessing.DirImportPostprocessor.postprocess30Import(DirImportPostprocessor.java:62) at com.sap.aii.ibdir.server.transport.impl.postprocessing.InternalPostprocessingService.postprocess(InternalPostprocessingService.java:211) at com.sap.aii.ibdir.server.transport.impl.postprocessing.PostprocessingService.doPostprocessing(PostprocessingService.java:168) at com.sap.aii.ibdir.server.pvcadapt.XIDirPropagationProvider.transportFinished(XIDirPropagationProvider.java:90) at com.sap.aii.ib.server.transport.impl.pvc.PvcTransport.pvcImport(PvcTransport.java:107) at com.sap.aii.ibdir.server.transport.impl.pvc.DirPvcTransport.pvcImport(DirPvcTransport.java:74) at com.sap.aii.ibdir.server.transport.impl.service.InternalDirTransportServiceImpl.pvcImport(InternalDirTransportServiceImpl.java:127) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importZippedStream(InternalTransportServiceImpl.java:709) at com.sap.aii.ib.server.transport.impl.service.InternalTransportServiceImpl.importFromImportSource(InternalTransportServiceImpl.java:365) at com.sap.aii.ib.server.transport.impl.service.TransportServiceImpl.importFromImportSource(TransportServiceImpl.java:154) at com.sap.aii.ib.sbeans.transport.TransportServiceBean.importFromImportSource(TransportServiceBean.java:129) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0.importFromImportSource(TransportServiceRemoteObjectImpl1_0.java:730) at com.sap.aii.ib.sbeans.transport.TransportServiceRemoteObjectImpl1_0p4_Skel.dispatch(TransportServiceRemoteObjectImpl1_0p4_Skel.java:105) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313) at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199) at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(AccessController.java:215) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
I couldn't find any similiar problem when searching SDN and SAP Notes.
BR,
MartinHi
Chk this thread
XI Transport Error
BR -
Problem in Importing Configuration object
Dear All,
I am facing the problem while importing ID object.
Business system INTEGRATION_SERVER_XIP is not assigned to a business system group with the ID (XISystemGroup).
So , I just try to create a Group in Business System in SLD. But I could not find the option to create the System Gourp.
I could n't see <b> edit groups </b>
any clue..
Regards
DanabHi,
First, you have to start the SLD.
To create a group, proceed as follows:
> Business Systems
> Click on the drop-down next to Group and select Edit Groups
> Create a group for each environment (eg DEV, TST, PRD). Specify for each group which Integration Server is used.
To assign business systems to a group, proceed as follows:
> Business Systems (Group = all)
> Select your Business System
> Click on the Integration tab.
> Select the related Integration Server (which is associated with a group - see step 1)
To map your DEV Business Systems to TST Business Systems etc., proceed as follows:
> Business Systems
> Select the group of your choice
> Select your Business System
> Click on Transport
> Click on Add/Change Target
> Select the Target Group and System
KR, Danny De Roovere -
Problem with XI objects transport - Unable to set import lock for SWC
Hi guys!
I try to import objects from dev to qa but I'm getting following error:
Unable to set import lock for software component version SWC_xxxx , 1.0 of company.com because user OSALUDEW is currently importing data to this component Try again once user OSALUDEW has finished importing data
The problem is, I'm not importing anything.. Well, I try to import, but something is hanging there from previous time.
How to solve this issue?
Thank you!
OlainWell,
I closed all the applications - repositories (dev, qa), directories (dev, qa), then started qa repository again and imported the objects successfully
....hmmm....
Olian -
CAT2 problem: Error when attempting to IMPORT object "C1
Hello Friends,
We are upgraded from SAP 4.6C to ECC6.0
I am getting problem for CAT2 Transaction. CAT2 is working fine for most of the personnel numbers but for few persons, it is giving an ABAP dump.
Runtime Errors CONNE_IMPORT_WRONG_COMP_TYPE
Except. CX_SY_IMPORT_MISMATCH_ERROR
Short text: Error when attempting to IMPORT object "C1".
We are not able to distinguish what is the cause for CAT2 giving dump for few employees. We are getting this dump in the initial screen when we enter the timesheet profile and personnel number.
I have also done the comparision betn the employess for which CAT2 is working and for which it is giving dump. but dont got any clue.
Request you to suggest me
MadhuHi,
This is a really old thread. Please open a thread for your specific issue.
-Paul
Moderator -
Idoc not available in PI import objects
Hello Guru's
We are using SAP AFS6.3 and PI 7.0 .
The Basic Idoc type /AFS/MATMAS05 and /AFS/ORDERS06 is not avialable in PI imort objects. Is thete is any seetings we need to active either
in AFS or PI system for getting these Idoc in PI.
Please help in this regards
SAHi , i did following
1. Under the SWCV Go to the Imported Objects.
2. Right click on the IDoc and click on the Import of SAP object.
3. Give the logon server name, system number the user name and pasword of AFS system.
4. Select the IDoc u want to import.
5. Execute the import and the IDoc is imported under the SWCV.
In above step 4. ..m not able to see the /AFS/MATMAS05 Idoc how i can select???
List doesn't have AFS related Idoc. But same idoc i can see in AFS system.This is my problem.
How do i get the Idoc in 4 step List.
Rgz
Subham -
Unable to Import objects into ID
Hi All,
For your support I have completed the development work and I have moved to Quality from Development. But while trying to import the one scenario in to Quality System from Development in XI, I am getting the following Error:-
Internal error: Unable to transfer changes for object Service | Q14CLNT120 to change list "XI 3.0 Import" (9a590f30-7245-11dc-9266-00306ee97ef1) since object still in change list "XI 3.0 Import" (3ae5e660-701d-11dc-942e-00306ee97ef1)
I have somehow managed to import another scenario last week into Quality, although now I am unable to import. But while trying to activate the imported scenario into Quality System I am getting another Error as below:-
Unable to move object. Change lists were not part of the same import
I tried to activate the change list..but no woek.
Could anyone please advice?
BR
SoumyaHave you checked the GUID in SLD in both the systems?
<b>SLD-->Software Components, to check the GUID.</b>
You can do one thing, first of delete imported objects which are not getting activated from QA, also delete the SWCV from Integration Repository.
<b>Note:</b> Before deleting SWCV, make sure any other working objects are not there in the same SWCV.
Now, if <b>SWCV & GUID</b> in both systems are <b>same</b> then again:
1. Export the objects from Dev (.tpz file)
2. Imort the same .tpz file to QA system.
Now go to Repository of QA and
1. <b>Tools --> Import Design Objects</b>
2. <b>Tools --> Transfer from system landscape Directory --> Update Application Components.</b>
Select your components and press Finish button.
And finally try to Acitvate your objects.
Regards,
Sarvesh
*****Reward points, if found helpfull. -
Getting this error from DirSync
Unable to update this object because the following attributes associated with this object have values that may already be associated with another object in your local directory services: [UserPrincipalName
[email protected];]. Correct or remove the duplicate values in your local directory. Please refer to
http://support.microsoft.com/kb/2647098 for more information on identifying objects with duplicate attribute values.
Quick eyeball and couldn't see the cause in the user account so used the script here:
http://gallery.technet.microsoft.com/office/Fix-Duplicate-User-d92215ef
And got these outputs:
PS C:\Windows\System32\WindowsPowerShell\v1.0> Export-OSCADUserPrincipalName -UserPrincipalName "[email protected]" -Path .\outputs.csv
WARNING: Cannot find objects with specified duplicate user principal name
[email protected]
Found 0 user(s) with duplicate user principal name.
Where to from here?
Richard PHi,
Did you talk about the Microsoft Azure Active Directory Sync tool ?
If yes, this issue occurs if one or more of the following conditions are true:
An object in the on-premises Active Directory has an SMTP address that's the same as the SMTP address of the object that's reporting the problem.
An object in the on-premises Active Directory has a mail attribute that's identical to the object that's reporting the problem.
An object already exists in your organizational account and has the same SMTP address or mail attribute as the object in the on-premises Active Directory
More detail information, please refer to:
http://support.microsoft.com/kb/2520976/en-us
[Troubleshooting] Unable to update this object because the following attributes associated with this object
http://blogs.technet.com/b/aadsyncsupport/archive/2014/05/20/troubleshooting-unable-to-update-this-object-because-the-following-attributes-associated-with-this-object.aspx
Regards.
Vivian Wang -
Not able to import business system in Integration Directory
Dear all,
Currently i involved in XI system copy. As per the standard documetn i have finsihed the initial activites like EXPORT and import of abap and java files is succedded.
Now in the post instalaltion activites.
I have changed the exchange profile parameter
SLD connection.
And other post installation activites succesfully.
But I am not able to import the business system in Integration director. It throws an error by mentioning.
*Access to object list of type business system using the internalEOA service business system accessor failed *
Here we are maintaing a central SLD and hence i created the service users with specific roles.
SLDcheck is working fine and it dispalying the businees system as well.
I confirmed that the user and password are same in XI and SLD system,
But in SLD I am not able to see the domain under web as Exchagne Infrastructure alonng with the componets. I have tried to registerd the same using the note 761476 but in vain. After the changes i restarted the machin and checked the domain status in SLD technical system under exchagne Inffrastructure its not working.
Is this the problem or am i missing out somewhere?
FYI: The users are not locked.
Kindly suggest me and it will be greatful if i get immediate reply.
Thanks and regards
Vijay kumar GHi Vijay,
It looks like the problem is with the SLD.
Did you delete the SAP ABAP and Java technical system and business systems and recreate them in the central SLD? If this was the case, then you may not be able to import them into your integration directory anymore, as the GUID of the new technical systems and business systems are not the same with the previous one.
Why not tried to recopy the SLD again, and this time do not change the technical and business systems. If the reregistration of these systems are not avoidable, then you will have to open up the copied IR for configuration.
Regards,
Lim... -
Problem During Importing using DBMS_DATAPUMP
Hi,
I am facing Problems while Importing usinf DBMS_DATAPUMP:
Its not showing any Error but the Tables not getting Imported.
Below is the Code whihc i have written for Import:
CREATE OR REPLACE PROCEDURE Data_Pump_Import_Load AS
ind NUMBER; -- Loop index
h1 NUMBER; -- Data Pump job handle
percent_done NUMBER; -- Percentage of job complete
job_state VARCHAR2(30); -- To keep track of job state
le ku$_LogEntry; -- For WIP and error messages
js ku$_JobStatus; -- The job status from get_status
jd ku$_JobDesc; -- The job description from get_status
sts ku$_Status; -- The status object returned by get_status
BEGIN
-- Create a (user-named) Data Pump job to do a schema export.
DBMS_OUTPUT.PUT_LINE('COMES HERE');
h1 := DBMS_DATAPUMP.OPEN(operation => 'IMPORT', job_mode =>
'TABLE',job_name => 'RET_IMPORT_TEST');
DBMS_OUTPUT.PUT_LINE('COMES HERE1111');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEXPORTTEST.DMP', DIRECTORY => 'EXPORT_DIR',filetype=>1);
DBMS_OUTPUT.PUT_LINE('COMES HERE2222');
DBMS_DATAPUMP.ADD_FILE(handle => h1,filename =>
'MYEIMPORTTEST.LOG',DIRECTORY => 'EXPORT_DIR',filetype=>3);
DBMS_DATAPUMP.SET_PARAMETER (handle => h1,
NAME => 'INCLUDE_METADATA',
VALUE => 1);
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'DATA_ACCESS_METHOD', VALUE =>'AUTOMATIC');
DBMS_DATAPUMP.SET_PARAMETER(handle => h1,NAME =>
'TABLE_EXISTS_ACTION', VALUE =>'REPLACE');
DBMS_OUTPUT.PUT_LINE('COMES HERE3333');
-- Specify a single dump file for the job (using the handle just returned)
-- and a directory object, which must already be defined and accessible
-- to the user running this procedure.
-- Start the job. An exception will be generated if something is not set up
-- properly.
DBMS_DATAPUMP.START_JOB(h1);
-- The export job should now be running. In the following loop, the job
-- is monitored until it completes. In the meantime, progress information is
-- displayed.
percent_done := 0;
job_state := 'UNDEFINED';
WHILE (job_state != 'COMPLETED') AND (job_state != 'STOPPED') LOOP
dbms_datapump.get_status(h1,
dbms_datapump.ku$_status_job_error +
dbms_datapump.ku$_status_job_status +
dbms_datapump.ku$_status_wip,-1,job_state,sts);
js := sts.job_status;
-- If the percentage done changed, display the new value.
IF js.percent_done != percent_done
THEN
DBMS_OUTPUT.PUT_LINE('*** Job percent done = ' ||
TO_CHAR(js.percent_done));
percent_done := js.percent_done;
END IF;
-- If any work-in-progress (WIP) or error messages were received for the job,
-- display them.
IF (BITAND(sts.mask,dbms_datapump.ku$_status_wip) != 0)
THEN
le := sts.wip;
ELSE
IF (BITAND(sts.mask,dbms_datapump.ku$_status_job_error) != 0)
THEN
le := sts.error;
ELSE
le := NULL;
END IF;
END IF;
IF le IS NOT NULL
THEN
ind := le.FIRST;
WHILE ind IS NOT NULL LOOP
DBMS_OUTPUT.PUT_LINE(le(ind).LogText);
ind := le.NEXT(ind);
END LOOP;
END IF;
END LOOP;
-- Indicate that the job finished and detach from it.
DBMS_OUTPUT.PUT_LINE('Job has completed');
DBMS_OUTPUT.PUT_LINE('Final job state = ' || job_state);
dbms_datapump.detach(h1);
END;
/Use metadata_remap proc with REMAP_SCHEMA option:
DBMS_DATAPUMP.METADATA_RAMAP(id, 'REMAP_SCHEMA', 'SOURCE_SCHEMA', 'DESTINATION_SCHEMA'); -
I have a problem with importing files.
eg i have a file: Complex.java
how can i use this file in another program (NR.java)??I have a problem with importing files.
eg i have a file: Complex.java
how can i use this file in another program
(NR.java)??There are 2 ways of that purpose.
1.If they are in the different and you hope you have your own function lib, you can define package in Complex.java, and import the package, that you can use this class.
Example:
if your CLASSPATH = .;E:\java;
you must put you Complex.class in E:\java\mylib;
//==== Complex.java ====//
package mylib;
public class Complex{
public int add(int a, int b){ return (a+b); }
//==== NR.java ====//
import mylib.*;
public class NR{
public static void main(String[] args){
Complex obj = new Complex();
System.out.println("Sum is ",obj.add(1,2));
}2.If they are in the same directory, you can use it directly without define package.
Example:
//==== Complex.java ====//
public class Complex{
public int add(int a, int b){ return (a+b); }
//==== NR.java ====//
public class NR{
public static void main(String[] args){
Complex obj = new Complex();
System.out.println("Sum is ",obj.add(1,2)); -
Problem in Importing RFC from ECQ to XIQ
Hi.....
I have a problem in importing the RFC from ECC Quality Server to PI Quality Server.......
When I fill the fields like
Application Server......
System Number.....
UserName
Password.....
I am getting a screen Problem.....in which error information is given....
One of the error is UserName(XXXX) cannot have access to aii.sap......
Please help me.....
Thanks,
SudheerHi Sudheer,
Kindly check the user having all authorizations which you are try to importing the RFC's from ECQ to XIQ, check with your basis team and try to provide the required authorizations for that particular user.
Then you can able to import RFC's and do the design by activating the objects.
Regards
Venkat Rao .G -
Problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007
Gentlemen,
I have a problem while import u201CSAPKU60003 & SAPKNA7013u201D into SAP CRM 2007,
My current Support Package Level is:
SAP_ABA 700 0015
SAP_BASIS 700 0015
PI_BASIS 2006_1_700 0006
ST-PI 2005_1_700 0006
CRMUIF 600 0003
SAP_BW 700 0017
SAP_AP 700 0012
BBPCRM 600 0002
First I had the following error:
Syslog: k CQ3 : UMGSETTING& rscpexcc 12
GetDBMigrateCodePagesLangs uses TCP0D, TCPDB, TCP0C.
0 entries from FUNCT (%/SAPCND/CNF_GET_RECORD_FROM_DB%) deleted.
0 d / 0 i / 0 u / 6 = 100% ucf FUPARAREF
6 entries for FUPARAREF imported (/SAPCND/CNF_GET_RECORD_FROM_DBA*).
0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
0 entries from RODIR (FUNC/SAPCND/CNF_GET_RECORD_FROM_DB) deleted.
0 d / 0 i / 0 u / 1 = 100% ucf TFTIT
1 entry for TFTIT imported (D/SAPCND/CNF_GET_RECORD_FROM_DB*).
successfully set a temporary lock on table REPOSRC
REPOS /SAPCND/LDETERMINATION$14 A replaced.
REPOS /SAPCND/LDETERMINATIONU14 A replaced.
[dev trc ,00000] Wed Nov 26 16:33:14 2008 1315447 8.171484
[dbdsoci. ,00000] *** ERROR => invalid offset 0 for placeholder 16
71 8.171555
unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
dsql_open returned with unexpected error code 2
Please contact the SAP support.
End of Transport (0016).
date&time: 26.11.2008 - 16:33:14
5 warnings occured.
3 errors occured.
Main import
End date and time : 20081126163314
Ended with return code: ===> 16 <===
After I got this error I upgraded the Kernel from patch level 159 to 179,
After that I restarted the update again but the system is still running on u201CIMPORT_PROPERu201D and dose not given any update,
From Import logs of the queue I can see the following,
Summary:
24 DOCUT imported.
16 DYNPS imported.
30 DYNPT imported.
387 REPOS imported.
43 REPOT imported.
Totally 505 Objects imported.
Totally 3636 tabentries deleted.
Totally 14 objects activated.
Totally 12229 tabentries imported.
62066888 bytes modified in database.
[dev trc ,00000] Wed Nov 26 18:14:19 2008 20996974 40.917838
[dev trc ,00000] Disconnecting from ALL connections: 30 40.917868
[dev trc ,00000] Disconnecting from connection 0 ... 287 40.918155
[dev trc ,00000] Closing user session (con_hdl=0,svchp=00000000003005B8,usrhp=00000000002FB748)
5759 40.923914
[dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=00000000003005B8,srvhp=00000000061530E8)
921 40.924835
[dev trc ,00000] Now I'm disconnected from ORACLE 8230 40.933065
[dev trc ,00000] Disconnected from connection 0 90 40.933155
[dev trc ,00000] statistics db_con_commit (com_total=527, com_tx=307)
59 40.933214
[dev trc ,00000] statistics db_con_rollback (roll_total=0, roll_tx=0)
52 40.933266
Disconnected from database.
End of Transport (0004).
date&time: 26.11.2008 - 18:14:19
2 warnings occured.
Main import
End date and time : 20081126181419
Ended with return code: ===> 4 <===
Please advice me.
Regards,
AhmedI have similar problem while updating support packages in SAP R/3 4.6C environment.
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
000 unsuccessful statement: EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,
000 dsql_open returned with unexpected error code 1
Here is an outline of series of events that happened:-
We are applying in support packages in SAP R/3 4.6C HR Development
(TFI) environment. We planned with installing all the SP stacks
starting from 1 to 9.
-Updated kernel, tp , r3trans and SPAM level to latest level.
We received the following error in Import_Proper step of Support
package upgrade. Though the step has been repeated after making sure
that we have all the required files at OS level, we go this error
repeatedly.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Main import
End date and time : 20081205192603
Ended with return code: ===> 16 <===
When we renamed Co-File & data_file at OS level to see if the files are
created again and reran we got the following error.
Main import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.24 46D
Main import
End date and time : 20081205185117
Ended with return code: ===> 12 <===
We tried importing the individual support package SAPKB46C52 from STMS
and the transport cancelled at an earlier step with the same error.
Dictionary import
Transport request___: SAPKB46C52
System______________: TFI
tp path : tp
Version and Release: 305.13.25 46D
check-sum error in datafile after 9374854 bytes.
Dictionary import
End date and time : 20081205195929
Ended with return code: ===> 16 <===
While playing around I have deleted the transport from the tp buffer
and added manually, before doing so I made a backup of tp buffer at OS
level and I got following error though I reverted back to backed-up
copy.
- Error in phase: IMPORT_PROPER
- Reason for error: TP_BUFFER_INCONSISTENCY
- Return code: 0008
- Error message: Wrong sequence of Packages in the tp buffer (e.g.
SAPKB46C52 )
I then tried to disassemble the package separately and reran the
import queue. Now I have RC 8 on that support package.
When I did R3trans -l on the datafile it completed successfully.
D:\>R3trans -l \usr\sap\trans\data\RB46C52.SAP
This is R3trans version 6.05 (release 46D - 27.10.08 - 16:32:00).
R3trans finished (0000).
I verified the size of file "CSR0120031469_0023301.PAT" and it is the
same as mentioned in SSP.
Let us know is there is a workaround. -
Error when attempting to IMPORT object "TS_CHECK".
When using in BI SAP NetWeaver 2004s (700 - SP 15) the transaction ST04old -> Detail analysis menu -> Summary report
The following short dump occurs:
Runtime Errors CONNE_IMPORT_WRONG_COMP_TYPE
Except. CX_SY_IMPORT_MISMATCH_ERROR
Date and Time 19.11.2008 15:14:08
Short text
Error when attempting to IMPORT object "TS_CHECK".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLSTD4" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_IMPORT_MISMATCH_ERROR', was
not caught in
procedure "DB02_ORA_FILL_TS_CHECK__CRITOB" "(FUNCTION)", nor was it propagated
by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When importing the object "TS_CHECK", the component no. 4 in the
dataset has a different type from the corresponding component
of the target object in the program "SAPLSTD4".
The data type is "I" in the dataset, but "N" in the program.
Missing RAISING Clause in Interface
Program SAPLSTD4
Include LSTD4U03
Row 1
Module type (FUNCTION)
Module Name DB02_ORA_FILL_TS_CHECK__CRITOB
Trigger Location of Exception
Program SAPLSTD4
Include LSTD4U03
Row 51
Module type (FUNCTION)
Module Name DB02_ORA_FILL_TS_CHECK__CRITOB
Source Code Extract
Line
SourceCde
21
DATA: BEGIN OF TD110.
22
INCLUDE STRUCTURE TD110_STRU.
23
DATA: END OF TD110.
24
25
CURR_TIME = SY-UZEIT.
26
CURR_DATE = SY-DATUM.
27
28
CALL FUNCTION 'GET_DB_ORA_RELEASE'
29
IMPORTING
30
ORACLE_RELEASE = ORA_REL.
31
32
IF FLAG_REFRESH = 'y'. FLAG_REFRESH = 'Y'. ENDIF.
33
flag_refresh = 'Y': Es soll in jedem Fall auf die DB zugegriffen werd.
34
35
CLEAR TS_CHECK. REFRESH TS_CHECK.
36
CLEAR CRITOBJ. REFRESH CRITOBJ.
37
CLEAR NR_CRIT_OBJ.
38
39
IF FLAG_REFRESH <> 'Y'.
40
41
Suche zunächst im Arbeitsspeicher !
42
CLEAR TS_CHECK_CACHE. READ TABLE TS_CHECK_CACHE.
43
IF NOT ( TS_CHECK_CACHE IS INITIAL ) .
44
TS_CHECK[] = TS_CHECK_CACHE[].
45
CRITOBJ[] = CRITOBJ_CACHE[].
46
OK_1 = 'Y'.
47
48
Suche danach in 'MONI' !
49
ELSE.
50
PERFORM PREPARE_MONIKEY USING 2.
>>>>>
IMPORT TS_CHECK CRITOBJ FROM DATABASE MONI(DB) ID MONIKEY.
52
53
IF SY-SUBRC = 0.
54
OK_1 = 'Y'.
55
TS_CHECK_CACHE[] = TS_CHECK[].
56
CRITOBJ_CACHE[] = CRITOBJ[].
57
ENDIF.
58
ENDIF.
59
60
'Same procedure' für datetime:
61
IF NOT ( TD110_CACHE IS INITIAL ).
62
DATETIME-MONI_DATE = TD110_CACHE-DATUM.
63
DATETIME-MONI_TIME = TD110_CACHE-UZEIT.
64
ELSE.
65
PERFORM PREPARE_MONIKEY USING 3.
66
IMPORT TD110 FROM DATABASE MONI(DB) ID MONIKEY.
67
IF SY-SUBRC = 0.
68
DATETIME-MONI_DATE = TD110-DATUM.
69
DATETIME-MONI_TIME = TD110-UZEIT.
70
TD110_CACHE = TD110.
Only related SDN post is following, but solved by changing permissions for saposcol.
Only related SAP Note is SAP Note Number 597743 "DB02: Poor entries for critical objects list", but not applicable for current SAP version.
For me strange is that this issue occurs on the development system, but not on the acceptance and production system.
Thanks in advance for any assistance.
KR
GidionReceived the solution from SAP Active Global Support:
This error occurs due a corruption in the table MONI.
For solving this issue you need to clean the records of this table via the following path :
1. Call transaction ST03
2. With GOTO -> Performance database -> Content of database
3. Push button Delete data group
4. Enter ID DB
5. Continue
6. Confirm the delete
If you wish to backup the data before deleting the entry please follow the steps in the note 1000275 "DB02: history data backup procedure".
Regards,
Gidion
Maybe you are looking for
-
Problem connecting OSX 10.6.8 to Windows 7 Shared Folder
We are having a serious issue connecting either of our 10.6.8 Macs (Macbook Pro & Powermac) to any Windows 7 machine in our studio. We just upgraded from XP. Connection is usually possible, but is incredibly unstable, In the console I am getting this
-
Is there anyway to stop the camera and volume buttons from waking up the screen when in your pocket to save battery life?
-
If I'm licensed for Univeral Records Management including...
Univeral Content Management, Content Server, Records Management adapters (& more), do I still have to purchase a license for Secure Enterprise Search to make Records management work with the FileSystem adapter (that I'm licensed for?). I guess anothe
-
Samsung SyncMaster 215TW display goes black for 2-3 seconds on DVI
My SyncMaster 215TW goes black (blinks off?) for 2-3 seconds while connected to my PowerBook by DVI. After trying to get help from Samsung's support site (lot's of the widgets seem to be broken), I found a page ( http://erms.samsungusa.com/customer/s
-
When packaging an InDesign file get missing plug-in error msg?
When going to package an InDesign file, we get a message about missing a plug-in, and the only option is to hit "OK" which stops the packaging process. The info on the (missing???) plug-in says: SMD Channels Model.SDK.inDesign plug-in. We are using C