Problems executing 'asant create-db_common'

Trying to populate the Pointbase database. I get
Buildfile: build.xml
init:
create-db_common:
[java] gij: unrecognized option -- '-ms16m'
[java] Try 'gij --help' for more information
[java] Java Result: 1
BUILD SUCCESSFUL
I looked at the help for gij and it lists the option as --ms=NUMBER
I set the arg to just -ms16 and it fails. (tried a few variations as well)
Thanks for any help
James

I appears you are using GNU's gij/gcj, which we have not tested with the Tutorial. Our build scripts are designed to work with Sun's JDK. Install J2SE version 1.4.2 and then run the asant tasks.
-Ian Evans

Similar Messages

Problem with asant create-db_common

Dear All,
I'm trying the bookstore example from J2EE Tutorial. I face some problem when I try to populate the database. According to the book (J2EE Tutorial, 2nd Edition, page 101), I need to start PointBase. Then I run asant create-db_common. After I run asant create-db_common, I got the following error message
BUILD FAILED
file: D:/Javaj2sdk/j2eetutorial14/examples/common/targets.xml:20: C:\Sun\AppServer\pointbasedb.driver=com.pointbase.jdbc.jdbcUniversalDriver\lib not found.
May I know what's wrong. Can you please help me? Thank you very much.
Regards,
Sui

A variable can't be named "C:\Sun\AppServer\pointbasedb.driver".
-- markus.

Error when trying to create tables using "asant create-db_common"

Hi,
I'm attempting to run asant create-db_common to use a .sql file to create a table in Pointbase. However I keep getting this error:
Buildfile: build.xml
init:
create-db_common:
[java] java.lang.NoClassDefFoundError: com/pointbase/tools/toolsCommander
[java] Exception in thread "main"
BUILD SUCCESSFUL
Total time: 1 secondWhich means I need to include the classpath, I presume! But I don't know what file to add it to or where to begin.
Can anyone help?
Thanks.

Still haven't solved this problem.
Can anyone guide me at all?
Many thanks.

Can't run "asant create-db_common" for the bookstore tutorials.

the instruction on :
http://java.sun.com/j2ee/1.4/docs/tutorial/doc/WebApp13.html
said:
" In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/bookstore/.
Run asant create-db_common. This task runs a PointBase commander tool command to read the file books.sql and execute the SQL commands contained in the file. The table named books is created for the user pbpublic in the sun-appserv-samples PointBase database."
but when I tried it, I can't seem to find the anyfile with create-db_common in it?????
Thanks for the hlep in advance.
SongPerk Sem

Dear sbodoff,
Thank you for the prompt reply.
I tried it again and got the following.
C:\Sun\j2eetutorial14\examples\web\bookstore>asant create-db_common
Buildfile: build.xml
init:
create-db_common:
BUILD FAILED
file:C:/Sun/j2eetutorial14/examples/common/targets.xml:20: C:\pointbase\lib not found.
Total time: 0 seconds
when I run ant before, it kept telling me "c:\lib not found" and I finally create an empty c:\lib directory and ant works fine. Now I have "C:\pointbase\lib not found", am I missing some environmental variables????
I am running windows xp and this is a snap shot of the environmental variables.
C:\Sun\j2eetutorial14\examples\web\bookstore>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
ANT_HOME=C:\Sun\apache-ant-1.6.0
APPDATA=C:\Documents and Settings\songperk\Application Data
CLASSPATH="C\QTJava.zip";C:\Sun\apache-ant-1.6.0\lib;C:\Sun\apache-ant-1.6.0\lib\ant.jar;C:\Sun\j2sdk1.4.2_03\lib;C:\Sun\AppServer\lib;C:\Sun\AppServer\pointbase\lib
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=CHEETAH
ComSpec=C:\WINDOWS\system32\cmd.exe
HOMEDRIVE=C:
HOMEPATH=\Documents and Settings\songperk
J2EE_HOME=C:\Sun\AppServer
JAVA_HOME=C:\Sun\j2sdk1.4.2_03
LOGONSERVER=\\CHEETAH
NUMBER_OF_PROCESSORS=1
Sorry for all the trouble. Is there a place where I can get an update on how to run and install the tutorial?
Sincerely,
SongPerk Sem

Problem in using CREATE TABLE with Execute Immediate

I'm trying to create a table using Native Dynamic SQL. the code of the pl/sql block is
BEGIN
EXECUTE IMMEDIATE 'create table demo (ddate date)';
END;
The problem is that the above block is executed successfully as an anonymous PL/SQL block. The same block when written in a procedure it gives an error
"ORA-01031 Insufficient privelages"
at the time of execution. The procedure is complied successfully.
null

Your user needs direct system privs to create tables. You are receiving your privs properly by the role RESOURCE. Connect as system and grant CREATE TABLE directly to your user - that should do it.
Regards
Peter Larsen

Problem executing function

Hi All,
I have a problem executing a function in oracle 10g.
I am getting an error while executing ....
Here is a function along with the error i am getting:
create or replace FUNCTION UnpackArray
Source IN VARCHAR2 DEFAULT NULL,
Delimiter IN CHAR DEFAULT ','
RETURN reSourceArray0 PIPELINED
IS
SourceArray00 SourceArray0:=SourceArray0(NULL);
TYPE REFCURSOR IS REF CURSOR;
CURSOR0 REFCURSOR;
DelLen int;
Pos int;
Cnt int;
str int;
LEN int;
Holder VARCHAR2(220);
BEGIN
--Check for NULL
IF Source is null or Delimiter is null THEN
Return;
END IF;
--Check for at leat one entry
IF RTRIM(LTRIM(Source)) = '' THEN
Return;
END IF;
/*Get the length of the delimeter*/
SELECT LENGTH(RTRIM(Delimiter)) INTO DelLen FROM DUAL;
SELECT INSTR(UPPER(Source), UPPER(Delimiter)) INTO Pos FROM DUAL;
--Only one entry was found
IF Pos = 0 THEN
BEGIN
INSERT INTO UnpackArray_TBL
( Data )
VALUES ( Source );
return;
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END;
END IF;
/*More than one entry was found - loop to get all of them*/
SELECT 1 INTO str FROM DUAL;
<< LABEL4 >>
WHILE Pos > 0
LOOP
BEGIN
/*Set current entry*/
SELECT Pos - str INTO len FROM DUAL;
SELECT SUBSTR(Source, str, len) INTO Holder FROM DUAL;
/* Update array and counter*/
/* Update array and counter*/
INSERT INTO UnpackArray_TBL
VALUES ( Holder );
/*Set the new strting position*/
SELECT Pos + DelLen INTO str FROM DUAL;
SELECT INSTR(UPPER(Source), UPPER(Delimiter), str) INTO Pos FROM DUAL;
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END;
END LOOP;
/*Set last entry*/
SELECT SUBSTR(Source, str, length(RTRIM(Source))) INTO Holder FROM DUAL;
-- Update array and counter if necessary
IF length(RTRIM(Holder)) > 0 THEN
INSERT INTO UnpackArray_TBL
VALUES ( Holder );
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END IF;
--Return the number of entries found
Return; LOOP
FETCH CURSOR0 INTO
SourceArray00.Data;
EXIT WHEN CURSOR0%NOTFOUND;
PIPE ROW(SourceArray00);
END LOOP;
CLOSE CURSOR0;
RETURN;
END;
Error is : Compilation failed,line 6 (12:13:25)
PLS-00201: identifier 'RESOURCEARRAY0' must be declared
Compilation failed,line 0 (12:13:25)
PL/SQL: Compilation unit analysis terminated
Regards,
Smiley

Hi,
I have a problem executing this function. Pls help me solve this issue.
---------------------------------Function---------------------------------
BEGIN
EXECUTE IMMEDIATE 'DROP TYPE reSourceArray0';
EXECUTE IMMEDIATE 'DROP TYPE SourceArray0';
EXCEPTION WHEN OTHERS THEN NULL;
END;
CREATE OR REPLACE TYPE SourceArray0 AS OBJECT(Data VARCHAR2(255));
CREATE OR REPLACE TYPE reSourceArray0 AS TABLE OF SourceArray0;
BEGIN
EXECUTE IMMEDIATE 'DROP TABLE UnpackArray_TBL CASCADE CONSTRAINTS';
EXCEPTION WHEN OTHERS THEN NULL;
END;
CREATE GLOBAL TEMPORARY TABLE UnpackArray_TBL(Data VARCHAR2(255)) ON COMMIT PRESERVE ROWS
CREATE OR REPLACE FUNCTION UnpackArray
Source IN VARCHAR2 DEFAULT NULL,
Delimiter IN CHAR DEFAULT ','
RETURN reSourceArray0 PIPELINED
IS
SourceArray00 SourceArray0:=SourceArray0(NULL);
TYPE REFCURSOR IS REF CURSOR;
CURSOR0 REFCURSOR;
DelLen int;
Pos int;
COUNT_ADV int;
START_ADV int;
LENGTH_ADV int;
Holder VARCHAR2(255);
BEGIN
--Check for NULL
IF Source is null or Delimiter is null THEN
Return;
END IF;
--Check for at leat one entry
IF RTRIM(LTRIM(Source)) = '' THEN
Return;
END IF;
/*Get the length of the delimeter*/
SELECT LENGTH(RTRIM(Delimiter)) INTO DelLen FROM DUAL;
SELECT INSTR(UPPER(Source), UPPER(Delimiter)) INTO Pos FROM DUAL;
--Only one entry was found
IF Pos = 0 THEN
BEGIN
INSERT INTO UnpackArray_TBL
( Data )
VALUES ( Source );
return;
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END;
END IF;
/*More than one entry was found - loop to get all of them*/
SELECT 1 INTO START_ADV FROM DUAL;
<< LABEL4 >>
WHILE Pos > 0
LOOP
BEGIN
/*Set current entry*/
SELECT Pos - START_ADV INTO LENGTH_ADV FROM DUAL;
SELECT SUBSTR(Source, start_, length) INTO Holder FROM DUAL;
/* Update array and counter*/
/* Update array and counter*/
INSERT INTO UnpackArray_TBL
VALUES ( Holder );
/*Set the new starting position*/
SELECT Pos + DelLen INTO START_ADV FROM DUAL;
SELECT INSTR(UPPER(Source), UPPER(Delimiter), START_ADV) INTO Pos FROM DUAL;
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END;
END LOOP;
/*Set last entry*/
SELECT SUBSTR(Source, start_, LENGTH(RTRIM(Source))) INTO Holder FROM DUAL;
-- Update array and counter if necessary
IF LENGTH(RTRIM(Holder)) > 0 THEN
INSERT INTO UnpackArray_TBL
VALUES ( Holder );
OPEN CURSOR0 FOR SELECT * FROM UnpackArray_TBL;
END IF;
--Return the number of entries found
Return; LOOP
FETCH CURSOR0 INTO
SourceArray00.Data;
EXIT WHEN CURSOR0%NOTFOUND;
PIPE ROW(SourceArray00);
END LOOP;
CLOSE CURSOR0;
RETURN;
END;
--------------------------------Error i am getting--------------------------
"Parameter 'RETURN_VALUE': No size set for variable length data type: String."
Thanks and Regards,
Smiley

Using execute immediate creating a table from another

hi friend i wanted to create a table from a select statement in a pl sql procedure. i am using execute immediate but getting problems with it pls can anyone help me.
here is the query i am using
EXECUTE IMMEDIATE 'CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE '%some_string%');
i need to know if this can be done and if yes how. pls help me its bit urgent too. the schema name is same and the privileges are available to create tables too.

Your syntax is wrong.
If you would use a syntax higlighted editor, it would show.
Yout try to execute a string where another string is embedded. Please use two times single quote or use the 'q' function:
This one is correct:
EXECUTE IMMEDIATE 'CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE ''%some_string%'')';
or this one:
EXECUTE IMMEDIATE q'|CREATE TABLE table_name AS (SELECT * FROM a_view WHERE column_name LIKE '%some_string%')|';
good luck

Oracle 11gR2 to SQL Server 2008 R2 - Problem executing SP on SQL server

Hi,
I have this problem: Executing a sp in SQL server from oracle
--------------------ORACLE SP--------------------
create or replace
PROCEDURE DRIVER_SP
AP IN OUT appl_param%ROWTYPE
as
v_sp_name varchar2(50);
v_control_id number;
val VARCHAR2(100);
cur INTEGER;
nr INTEGER;
BEGIN
v_sp_name := ap.MESSAGE_MISC_TEXT;
v_control_id := ap.control_id;
cur := DBMS_HS_PASSTHROUGH.OPEN_CURSOR@dblink_sqlserver;
DBMS_HS_PASSTHROUGH.PARSE@dblink_sqlserver(cur, 'execute ' || v_sp_name || ' ' || to_char(v_control_id));
LOOP
nr := DBMS_HS_PASSTHROUGH.FETCH_ROW@dblink_sqlserver(cur);
EXIT WHEN nr = 0;
DBMS_HS_PASSTHROUGH.GET_VALUE@dblink_sqlserver(cur, 1, val);
END LOOP;
DBMS_HS_PASSTHROUGH.CLOSE_CURSOR@dblink_sqlserver(cur);
driver_ap01_log_msg('Procedure returned: ' || val);
commit;
exception
when others then
driver_ap01_log_msg(sqlerrm);
END DRIVER_SP;
--------------------SQL Server SP-----------------------
ALTER PROCEDURE [dbo].[PA01_SP]
@control_id integer
AS
begin
--update PA01
--set infile_control_id = @control_id
--insert into dbo.PA01LOG(msg) values('test')
select 0
end
THE PROBLEM: Oracle SP calls SQL Server SP and any time I try to INSERT/UPDATE/DELETE (DML) within SQLServer SP it throws an exception on Oracle's end. Once I comment all DML code the proc runs fine.
+"ORA-28511: lost RPC connection to heterogeneous remote agent using SID=ORA-28511: lost RPC connection to heterogeneous remote agent using SID=(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=xxxxxxx)(PORT=1511))(CONNECT_DATA=(SID=dg4msql)))+
+ORA-02063: preceding line from DBLINK_SQLSERVER"+
Please help.
Thanks

Thanks for your response, it got me closer to my goal. I'm still facing one problem:
Let me explain what I need to achieve
Purpose
Execute an Oracle stored procedure which in turn executes a stored procedure on remote SQLServer which updates local tables on that SQLServer.
Observations
The execution of both procedures completes successfully. However, an explicit COMMIT statement must be issued on the Oracle session which initiated the transaction before any data could be read from the SQLServer updated table.
The following is test exercise for proof of concept.
PL/SQL code
declare
out_arg integer;
ret_val integer;
begin
out_arg := 0;
ret_val := "dbo"."ZZZ_SP"@DBLINK_SQLSERVER(10, out_arg);
dbms_output.put_line(to_char(out_arg));
end;
SQLServer code
ALTER procedure [dbo].[ZZZ_SP] (@arg1 integer, @arg2 integer output)
AS
begin tran tran1
insert into dbo.PA01LOG(msg) values('ddd')
commit tran tran1
set @arg2 = @arg1 * 100
select -1
GO
I have put the Oracle gateway in Single_Site mode to avoid two phase commit. I want SQLServer to be able to run its own transaction management. I don't want Oracle to be responsible for completing the transactions which take place within SQLServer.
I fear there might be a gap in my knowledge.
Any ideas why I need to issue a COMMIT in Oracle session to release the lock from SQLServer table?
Thanks

Adobe Acrobat Pro XI problems printing PDFs created from AutoCAD.

Just installed Adobe Acrobat Pro XI and am having problems printing PDFs created from AutoCAD. Printing other PDF created by MS Word works well. Had a similar problem in an earlier version of Pro. The fix I figure out then was to print the PDF file as another PDF. Using the second PDF to print to a plotter typically worked. It does not work for Adoabe Acrobat Pro XI.

Hi presottom
Please refer ; http://helpx.adobe.com/acrobat/kb/troubleshoot-pdf-printing-acrobat-reader.html
or
Let us know more details about it to help you better ?
What is the OS ?
is there any error message , etc .. ?

Problem in MSS - Create Requisition

Hi All,
We implementing E Recruitment on EHP4 sp4. we are facing a strange issue in the MSS-Create requisition request scenario.
We are using standard HCM process HR_MSSRCF_REQUISITION.
MSS user is able to create a requisition and send to his manager for approval. His manager can also approve it. But once the requisition is finally approved, the recruiter cannot see
the requisition in the recruiter dashboard
We have checked the workflow log, its finishing without errors.The e-rec infotype table HRP5131 does not have any new entries for Otype NB, But Manager can see his requisitions from MSS-Requisition Overview iview as completed.
Pls let me know if any config is missing? Do we need to run any background job to update the e-rec tables? There's no error message in any stage of process..still recruiters can't see the new requisition.
Regards,
Smit

Dear Smit,
We are implementing E-recruitment in our Project. We are facing problems with Manger creating requisition page. Its always displaying NO data available.
Can you please let us know if any configuration is to be done for it?
Thanks a lot in advance,
Regards,
Sai

I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

I created a publisher file, saved it as a pdf. The problem is I created it landscape and it only shows portrait cutting the sides off my document.

Sounds as if you used Microsoft software to make a PDF. If so, and you didn't use Adobe Acrobat ($$), then you need to get help with Publisher -- Adobe Reader only shows what you make.

Authorization problem with VF01 "Create Billing Documents"

Dear All,
We face following problem with VF01 "Create Billing Documents".
Transaction: VF01
User: Joe
Authorization of Joe:
     VKORG Sales Organization: A, B (authorization object V_VBRK_VKO)
     FKART Billing Type: 1, 2 (authorization object V_VBRK_FKA)
The objective for Joe:
   Joe is qualified to create bills in
      sales org A only for billing type 1 and in
      sales org B only for billing type 2.
   Joe should not be able to create bills for
      sales org A with billing type 2 and in
      sales org B with billing type 1.
How can we solve this problem?
We already searched for userexits without any success.
Any help or ideas are very appreciated.
Regards
Markus Wilhelm
Project Manager ERP

Dear,
There are standard authority-checks based on Sales organization (authorisation object V_VBRK_VKO) and/or Billing type (V_VBRK_FKA).
An option would be to create a new billing type, define specific authorisations and use the new billing type for these documents.
The bad thing is that you would also need a special (new) sales order type, because the billing document type is unique per sales order.
So maybe it is easier to have a different sales organization.
Another option would be to create a new authorization object and check it in the billing documents.
If you wish, you could modify program LV60A005 & LV60A006.
Then you might check various user/customer exits.
Some functions to check: EXIT_SAPLV60A_001/002,
EXIT_SAPLV60B_001 - 008, EXIT_SAPLV60B_010 - 011.
Regards,
R.Brahmankar

Problem executing a sql query in 10g environment

Hi,
I am having problem executing the following sql query in 10g environment. It works fine in 8i environment.
I tried to_number(to_char) and it did not work.
**A.APPL_ACTION_DT >= TO_CHAR("&v_strBeginStatusDate&", 'DD-MON-YYYY') AND A.APPL_ACTION_DT <= TO_CHAR("&v_strEndStatusDate&", 'DD-MON-YYYY')))**
Any suggestions..
--Pavan

I would be surprised if that worked in 8i as posted, although I no longer have 8i to test. You do not tell us the error message you are getting, but there are several things wrong with what you posted.
First, the substitution variable requires only the & at the beginning, you have one on each end of your string, the one at the end will remain in the string that is passed to the database.
Second, you cannot TO_CHAR a string with a date format as you are trying to do. The TO_CHAR function is overloaded and has two basic forms TO_CHAR(date, format_model) and TO_CHAR(number, format_model). Note that neither takes a string. It would appear that at least current versions of Oracle choose the second signature unless specifically passed a date datatype.
SQL> select to_char('&h', 'dd-mon-yyyy') from dual;
Enter value for h: 12
old   1: select to_char('&h', 'dd-mon-yyyy') from dual
new   1: select to_char('12', 'dd-mon-yyyy') from dual
select to_char('12', 'dd-mon-yyyy') from dual
ERROR at line 1:
ORA-01481: invalid number format modelalthough I suspect that the error you are getting with your posted code is more likely to be ORA-01722: invalid number.
Depending on the data type of appl_action_date, you are probably lokoing for TO_DATE instead of TO_CHAR.
John

Execute immideate Create spatial index

I can't create spatial index in package when use
execute immideate
declare
l_res varchar2(500);
begin
l_res := 'CREATE INDEX INDXSDO1_elements
ON (GEOMETRY)
INDEXTYPE IS MDSYS.SPATIAL_INDEX';
execute immediate l_res;
end;
i get an exception:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-13249: internal error in Spatial index: [mdidxrbd]
ORA-13249: Error in Spatial index: index build failed
ORA-13249: Error in R-tree: [mdrcrtscrt]
ORA-13231: failed to create index table [MDRT_FC41$] during R-tree creation
ORA-13249: Stmt-Execute Failure: CREATE TABLE "GMT_TECH".MDRT_FC41$ (NODE_ID NUMBER, NODE_LEVEL NUMBER, INFO BLOB) LOB (INFO) STORE AS (CACHE) NOLOGGING PCTFREE 2
ORA-29400: data cartridge error
ORA-01031: insufficient privileges
ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 10
ORA-06512: at "GMT_TECH.REBUILDINDEX", line 66
ORA-06512: at line 3
Why this happen?
I can create index without execute immediate
CREATE INDEX INDXSDO1_elements
ON (GEOMETRY)
INDEXTYPE IS MDSYS.SPATIAL_INDEX
Thanks!

Have you granted 'create table' and 'create sequence' to the user? Do this explicitly rather than through a role.

Problem with implicitly created Oracle pipes

Hi, I am having a problem with implicitly created Oracle pipes. I am not sure if this is the correct forum for this topic, but I could not see one which suited better..
I am using Oracle pipes as a commiunication mechanism between processes (some are written in PL/SQL and other in PRO*C).
The general problem I have is that if a timeout occurs during the communication process, I end up with 1 or perhaps 2 implicitly created pipes.
The biggest problem for me is that I am unable to determine if a create is implicitly created (via dbms_pipe.send_message or receive_message). This causes problems, since these implicitly created pipes are left behind and not deleted. I'll show you the basic flow of the processes and you shall see my problem.
server: create request pipe "req_pipe"
server: listen for request on requests pipe.
client: create two pipes for comms with server.
client: send request and the names of the newly created pipes to the server.
server: read request and pipename from request pipe (from this point all comms between the client and server are now done over the 2 pipes the client created).
server: send ack message to client to ensure they are still there (since requests can be queued in the request pipe and clients could have timed out before the request is received)
client: send "i'm still here" ack back to the server.
server: process request and send result back to client.
client: send ack back to server to let server know we have received the response.
server: send ack back to client to show that work is now committed.
OK thats the general event flow. I use the rule, that pipes created by a process are removed by a process. So the client always removes the pipes it created in all situations. But since this can happen at any point we can get in the situation:
client: timeout occurs, delete pipes.
server: send message to client (creates an implicit pipe) and therefor works (no errors raised)
server: do a read for response from previous message. (implicitly creates pipe) (will fail).
Now we have two implicitly created pipes! These pipes will exist until the database instance is shutdown, and in a poorly performing environment, we could get thousands of these pipes lying around... not a good situation.
How can I either stop pipes being implicilty created, or how do I detect if a pipe was implicitly created.
I have tried a couple of things, like using v$db_pipes to check if a pipe exists before doing send/reveive calls but this is FAR to slow to do a select on that view.
We have also looked at keeping a record of pipes created by the client then have some process (perhaps the server) clean up these pipes after some time frame. This is a workable solution but is not favourable since it adds extra overhead having to check these pipes often, and created an extra level of complexity which is not required..
Any suggestions will be greatly appreciated.
Feel free to email me with any suggestions on my email provided below, or just post a reply to this formum..
Many thanks,
Karl Bridger
[email protected]

I solved the problem by changing the SOAP massage format from Document/Wrapped to Document/Literal

Problems executing 'asant create-db_common'

Similar Messages

Maybe you are looking for