Problems getting in to aufm table
where can i find the primary keys to enter in to aufm table.
MBLNR
MJAHR
ZEILE
in which table can i get these values.
Hi Deepu,
Refer to the tables : MKPF - Header table & MSEG - Item details, you will be able to build the link.
If helpful award points
Regards,
Vivek
Similar Messages
-
Data is not getting updated in DB table
hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side: ZVendorIdoc
receiver side:
DT_testVendor
Table
tblVendor
action UPDATE_INSERT
access 1:unbounded
cVendorName 1
cVendorCode 1
fromdate 1
todate 1
Key
cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharmaHi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep -
Hi Everyone,
A Very Very Happy, Fun-filled, Awesome New Year to You All.
Now coming to the discussion of my problem in Oracle Forms 6i:
I have created a form in which the data is entered & saved in the database.
CREATE TABLE MATURED_FD_DTL
ACCT_FD_NO VARCHAR2(17 BYTE) NOT NULL,
CUST_CODE NUMBER(9),
FD_AMT NUMBER(15),
FD_INT_BAL NUMBER(15),
TDS NUMBER(15),
CHQ_NO NUMBER(10),
CREATED_DATE DATE,
CREATED_BY VARCHAR2(15 BYTE),
PREV_YR_TDS NUMBER(15),
ADD_FD_AMT NUMBER(15),
DESCRIPTION VARCHAR2(100 BYTE),
P_SAP_CODE NUMBER(10),
P_TYPE VARCHAR2(1 BYTE)
The form looks like below:
ENTER_QUERY EXECUTE_QUERY SAVE CLEAR EXIT
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
R
W
P
List Item
There are 5 push buttons namely ENTER_QUERY, EXECUTE_QUERY, SAVE, CLEAR, EXIT.
The table above is same as in the form. All the fields are text_item, except the P_TYPE which is a List_Item ( Elements in List Item are R, W & P).
The user will enter the data & save it.
So all this will get updated in the table MATURED_FD_DTL .
I am updating one column in another table named as KEC_FDACCT_MSTR.
and
I want this details to get updated in another table named as KEC_FDACCT_DTL only if the P_TYPE='P'
CREATE TABLE KEC_FDACCT_DTL
FD_SR_NO NUMBER(8) NOT NULL,
FD_DTL_SL_NO NUMBER(5),
ACCT_FD_NO VARCHAR2(17 BYTE) NOT NULL,
FD_AMT NUMBER(15,2),
INT_RATE NUMBER(15,2),
SAP_GLCODE NUMBER(10),
CATOGY_NAME VARCHAR2(30 BYTE),
PROCESS_YR_MON NUMBER(6),
INT_AMT NUMBER(16,2),
QUTERLY_FD_AMT NUMBER(16,2),
ITAX NUMBER(9,2),
MATURITY_DT DATE,
FDR_STAUS VARCHAR2(2 BYTE),
PAY_ACC_CODE VARCHAR2(85 BYTE),
BANK_CODE VARCHAR2(150 BYTE),
NET_AMOUNT_PAYABLE NUMBER,
QUATERLY_PAY_DT DATE,
CHEQUE_ON VARCHAR2(150 BYTE),
CHEQUE_NUMBER VARCHAR2(10 BYTE),
CHEQUE_DATE DATE,
MICR_NUMBER VARCHAR2(10 BYTE),
PAY_TYPE VARCHAR2(3 BYTE),
ADD_INT_AMT NUMBER(16,2),
ADD_QUTERLY_FD_AMT NUMBER(16,2),
ADD_ITAX NUMBER(16,2),
ECS_ADD_INT_AMT NUMBER(16),
ECS_ADD_QUTERLY_FD_AMT NUMBER(16),
ECS_ADD_ITAX NUMBER(16)
So for the push button 'Save' , i have put in the following code in the Trigger : WHEN BUTTON PRESSED,
BEGIN
Commit_form;
UPDATE KEC_FDACCT_MSTR SET PAY_STATUS='P' WHERE ACCT_FD_NO IN (SELECT ACCT_FD_NO FROM MATURED_FD_DTL);
UPDATE MATURED_FD_DTL SET CREATED_DATE=sysdate, CREATED_BY = :GLOBAL.USER_ID WHERE ACCT_FD_NO = :acct_fd_NO;
IF :P_TYPE='P' THEN
INSERT INTO KEC_FDACCT_DTL
SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
COMMIT;
MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
MESSAGE(' ',no_acknowledge);
END;
If P_TYPE='P' , then the data must get saved in KEC_FDACCT_DTL table.
The problem what is happening is,
If i enter the details with all the records as 'P' , the record gets inserted into the table KEC_FDACCT_DTL
If i enter the details with records of 'P' and 'R' , then nothing gets inserted into the table KEC_FDACCT_DTL.
Even the records with 'P' is not getting updated.
I want the records of 'P' , to be inserted into table KEC_FDACCT_DTL, even when multiple records of all types of 'P_Type' (R, w & P) are entered.
So, can you please help me with this.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle Forms Builder 6i.Its not working properly.
At Form_level_Trigger: POST_INSERT, I have put in the following code.
IF :P_TYPE='P'THEN
INSERT INTO KEC_FDACCT_DTL
SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
MESSAGE(' ',no_acknowledge);
It worked properly when i executed first time, but second time , in database duplicate values were stored.
Example: First I entered the following in the form & saved it.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
250398
52
50000
6000
0
600
0
45415
P
5678
int1
320107
56
100000
22478
3456
2247
0
45215
R
456
320108
87
50000
6500
0
650
0
21545
W
0
In the database, in table KEC_FDACCT_DTL, the ACCT_FD_NO:250398 with P_TYPE='P' record was inserted.
ACCT_FD_NO
P_TYPE
250398
P
But second time, when i entered the following in the form & saved.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
260189
82
50000
6000
0
600
0
45415
P
5678
interest567
120011
46
200000
44478
0
4447
0
45215
R
456
30191
86
50000
6500
0
650
0
21545
W
56
In the database, in the table KEC_FDACCT_DTL, the following rows were inserted.
ACCT_FD_NO
P_TYPE
250398
P
250398
P
260189
P
320107
R
320108
W
There was duplicate of 250398 which i dint enter in the form second time,
All the other P_TYPE was also inserted , but i want only the P_TYPE='P' to be inserted into the database.
I want only those records to be inserted into the form where P_TYPE='P' and duplicate rows must not be entered.
How do i do this??? -
Dears,
I have a problem. I need get an UI Element (for example input text field in row number three). this Element is in a ADF table.
I tried use the Get Children method but i can't get the input text field from table.
Thanks for your help.LEFT OUTER JOIN will get all data from table A and all related data from table B.
A standard JOIN will only get data that is related between tables.
<cfquery datasource="dsnName" name="sampleLOJ">
SELECT a.columnA, a.columnB, b.columnA, b.columnB
FROM tableA a LEFT OUTER JOIN tableB b ON b.colunnA = a.columnA
</cfquery>
This will get all data from tableA and all related data from tableB, where columnA in both are identical.
<cfquery datasource="dsnName" name="sampleJOIN">
SELECT a.columnA, a.columnB, b.columnA, b.columnB
FROM tableA a JOIN tableB b ON b.colunnA = a.columnA
</cfquery>
This will get only the data from tableA and related tableB data that have identical columnA entries.
^_^ -
Problem getting correct data from MS Access after doing an Update
Hi all,
I have a problem getting correct data after doing an update. This is the scenario
I am selecting some(Eg: All records where Column X = �7� ) records and update a column with a particular value (SET Column X = �c� ) in all these records by going through a while loop. In the while loop I add these records to a vector too, and pass it as the return value.
After getting this return value I go through a for loop and get each record one by one from the DB and check if my previous update has actually happened. Since No errors were caught while updating DB, I assume all records are updated properly but my record set shows one after another as if it has not been updated. But if I open the DB it is actually updated.
This does not happen to all records, always it shows like this
1st record Mode = �c�
2nd record Mode = �7�
3st record Mode = �c�
4nd record Mode = �7�
9th record Mode = �c�
10th record Mode = �7�
I am relatively new to java and this is someone elses code that I have to modify,So I am not sure if there some thing wrong in the code too
//Here is the method that gets records and call to update and add to vector
public static Vector getCanceledWorkOrders() throws CSDDBException{
//Variable declaration
try {
objDBConn = DBHandler.getCSDBCon();
strSQL = "SELECT bal bla WHERE [Detailed Mode])=?)";
objStmt = objDBConn.prepareStatement(strSQL);
objStmt.setString(1, '7');
objWOPRs = objStmt.executeQuery();
while (objWOPRs.next()) {
//Add elements to a vector by getting from result set
//updating each record as PROCESSING_CANCELLED_WO(c)
iRetVal = WorkOrderDetailingPolicy.updateRecordStatus(objPWODP.iWorkOrderNumber, objPWODP.strPersonInformed, EMSConstants.PROCESSING_CANCELLED_WO);
if (iRetVal == -1) {
throw new NewException("Updating failed");
catch (Exception e) {
vecWONumbers = null;
throw new CSDDBException(e.getMessage());
}finally{
try {
objWOPRs.close();
objStmt.close();
DBHandler.releaseCSDBCon(objDBConn);
catch (Exception ex) {}
//return vector
//here is the code that actually updates the records
public static int updateRecordStatus(int iWONumber, String strPerInformed , String strStatus) throws CSDDBException{
PreparedStatement objStmt = null;
Connection objDBConn = null;
String strSQL = null;
int iRetVal = -1;
try{
objDBConn = DBHandler.getCSDBCon();
objDBConn.setAutoCommit(false);
strSQL = "UPDATE Table SET [Detailed Mode] = ? WHERE bla bla";
objStmt = objDBConn.prepareStatement(strSQL);
objStmt.setString(1, strStatus);
objStmt.execute();
objDBConn.commit();
iRetVal = 1;
}catch(Exception e){
iRetVal = -1;
}finally{
try{
objStmt.close();
DBHandler.releaseCSDBCon(objDBConn);
}catch(Exception ex){}
return iRetVal;
//Here is the code that call the records again
public static WorkOrderDetailingPolicy getWorkOrders(int iWorkOrderNo) throws CSDDBException{
Connection objDBConn = null;
PreparedStatement objStmt = null;
ResultSet objWOPRs = null;
WorkOrderDetailingPolicy objPWODP = null;
String strSQL = null;
try {
objDBConn = DBHandler.getCSDBCon();
strSQL = "SELECT * FROM [Work Order Detailing] WHERE [Work Order No] = ?";
objStmt = objDBConn.prepareStatement(strSQL);
objStmt.setInt(1, iWorkOrderNo);
objWOPRs = objStmt.executeQuery();
if (objWOPRs.next()) {
objPWODP = new WorkOrderDetailingPolicy();
objPWODP.iWorkOrderNumber = objWOPRs.getInt("Work Order No");
//......Get Record values
catch (Exception e) {
objPWODP = null;
throw new CSDDBException(e.getMessage());
}finally{
try {
objWOPRs.close();
objStmt.close();
DBHandler.releaseCSDBCon(objDBConn);
catch (Exception ex) {}
return objPWODP;
}Hello,
Can you put an example of your problem online?
Are you sure you're not having problems with case sensitive data?
Thanks,
Dimitri -
How to get selected row from table(FacesCtrlHierBinding ).
I'am trying to get selected row data from table:
FacesCtrlHierBinding rowBinding = (FacesCtrlHierBinding) tab.getSelectedRow();
Row rw = rowBinding.getRow();
But import for oracle.adfinternal.view.faces.model.binding.FacesCtrlHierBinding cannot be found from my JDev 11.
What is correct package for FacesCtrlHierBinding?Hi, another problem.
I fill table with data manualy from source:
<af:table var="row" value="#{getCompanyData.com}"
rowSelection="single" columnSelection="single"
editingMode="clickToEdit"
binding="#{getCompanyData.tab}"
selectionListener="#{getCompanyData.GetSelectedCompany}">
<af:column sortable="false" headerText="col1">
<af:outputText value="#{row.id}"/>
</af:column>
<af:column sortable="false" headerText="col2">
<af:outputText value="#{row.name}"/>
</af:column>
<af:column sortable="false" headerText="col3">
<af:outputText value="#{row.phone}"/>
</af:column>
</af:table>
and when I'am trying to use method to get selected row:
RichTable table = this.getTab(); //get table bound to UI Table
RowKeySet rowKeys = table.getSelectedRowKeys();
Iterator selection = table.getSelectedRowKeys().iterator();
while (selection.hasNext())
Object key = selection.next();
table.setRowKey(key);
Object selCompany = table.getRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding) selCompany;
row = rowData.getRow();
I got an error:
SEVERE: Server Exception during PPR, #1
javax.el.ELException: java.lang.ClassCastException: data.COMPANY cannot be cast to oracle.jbo.uicli.binding.JUCtrlHierNodeBinding
When I created tables by dragging data from date control, all worked fine.
What could be a problem? -
Problem regarding the creation of Table using CSS.
Hi ,
Here I have a Problem regarding the creation of Table using CSS.
In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
width:900px;
height : auto,
Overflow : visible,
Max-height: : 200px.
If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
Thanks & Regards
MadhaviHey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?
-
How to get data from COSP table, field HRKFT as the key to data from PM?
Dear ladies and gentlemen!
I need to get data from COSP table, field HRKFT as the key to data from PM tables (AFKO and AUFK).
The problem is that it is a key field to the COSP, and all non-key fields as an alternative to HRKFT are not suitable for this task.
All this is necessary for the extractor, which loads the data from the R \ 3 systems in the BW-system. I need to perform SELECT from a table COSP and maybe also JOIN, most likely between tables COSP and AUFK.
What should I do in this case?
Thank you very much in advance!From information on help.sap.com I've made a conclusion that one of possible solutions in theory is to modify standard extractor PM_OM_OPA_1 in order to make HRKFT field available for work, because by default it is hidden by SAP and not available for use as a key field.
Of course, it's not a very good solution, but for now I know no other way to solve this problem.
Maybe someone knows better ways? In this case I will be very grateful for any help!
Moderator: You'd better post it on BI forums -
Clearing details i could not getting at BSIS & BSAS table. after Payment
Hi All,
I posted one invoice document through MIRO like below
Itm PK BusA Acct no. Description Tx Amount in INR
001 31 1000 102961 DRUCK INDIA PVT. LTD. SC 479,777.20-
002 86 1000 350101 GR-IR-Account SC 427,000.00
003 40 300816 Service Tax 1 Cess SC 51,240.00
004 40 300817 CESS 1 SC 1,024.80
005 40 300817 CESS 1 SC 512.40
payment to vendor also done through F110.
Itm PK BusA Acct no. Description T x Amount in INR
001 25 1000 102961 DRUCK INDIA PVT. LTD. 479,777.20
002 50 140904 ABN Amro Payments 479,777.20-
now problem is Clearing details i could not getting at BSIS & BSAS table.
but iam getting clearing details at BSEG table. what is the problem . plse give help & solution. it is very urgant.if u have any doubts plse ask me.
Advance Thanks
RajDear sridhar/ all
vendor side is all tables updated. it is ok. but i want detals about BSAS & BSIS.
because iam working on service tax creidit configuration. in BSEG table it is showing cleared. but in BSAS & BSIS tables not showing as a cleared item. what is the reason . plse give solution/ help.
Raj -
Problem reading data from two tables
Hi experts,
I'm developing a JDBC - IDOC scenario that needs to read data from two oracle tables. I have created a BPM that has a initial fork for the two channels and it works fine.
The problem is that I need to read data from the first, two or both tables depending if there is data to read. If there is data in the two tables it works, but if only there is data in one of the two tables, I have read problems. I have tryed to set the 'neccesary branches' to 1 but this is a problem when I have data in both tables.
Any idea?
Best Regards,
Alfredo Lagunar.Hi,
have your fork step inside a block and then right-click your block to insert a deadline branch to your BPM process and specify the time after which your BPM process should be cancelled.....so if in that time, you get data from both tables, your BPM will work okay otherwise if that time is over, then your BPM process will be cancelled.
Regards,
Rajeev Gupta -
OTF to PDF - Getting blank PDF Internal table with CONVERT_OTF func module
All
i've captured OTF from smartforms and tried converting to PDF through 'CONVERT_OTF_2_PDF' FUNCTIOn module and after emailing to external email id, i found logo is completely disturbed (characters in logo got mixed up)..... later i tried converting with ''CONVERT_OTF' function module, but here i'm getting blank PDF internal table....
what am i missing in both ?
my intention is converting otf to pdf and emailing...though there are thousands of similar threads are available , none of them are related to my exact problem, which is logo is getting mixed up or disturbed.... any suggestions ?
Thanks in advanceHi,
You need to use the function module SX_OBJECT_CONVERT_OTF_PDF to create the PDF from OTF ..
Here is an example program
report ZPDFPRNT no standard page heading.
TABLES: TST05.
DATA: BEGIN OF ITAB OCCURS 0,
TLINE(255),
END OF ITAB.
DATA: BEGIN OF ITAB2 OCCURS 0,
TLINE(255),
END OF ITAB2.
DATA: BEGIN OF ITAB3 OCCURS 0,
TLINE(255),
END OF ITAB3.
DATA: BEGIN OF OTF_TAB OCCURS 0,
TLINE(255),
END OF OTF_TAB.
DATA: LEN_OUT LIKE SOOD-OBJLEN.
DATA: LEN_IN LIKE SOOD-OBJLEN.
DATA: BEGIN OF DATA_SET OCCURS 200,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
END OF DATA_SET.
DATA: BEGIN OF OTF_PAGE OCCURS 200.
INCLUDE STRUCTURE ITCOO.
DATA: END OF OTF_PAGE,
OTF_PAGES TYPE P,
OTF_MAX_PAGES TYPE P VALUE 10.
DATA: BEGIN OF OTF_CONTROL.
INCLUDE STRUCTURE ITCPP.
DATA: END OF OTF_CONTROL,
FORCE_RAW_OTF VALUE ' ',
L100_EXCLUDE(4) VALUE 'OTFJ',
BEGIN OF OTF_PAGE_INDEX OCCURS 20,
LINE_NUM TYPE P,
END OF OTF_PAGE_INDEX,
CUR_OTF_PAGE VALUE 1.
DATA: DATA_SET_LINECOUNT TYPE P,
DATA_SET_MAX_LINES TYPE P VALUE 100000,
DATA_SET_VALID TYPE C VALUE ' ',
DATA_SET_IS_OTF TYPE C VALUE ' ',
DATA_SET_LENGTH(5) TYPE C,
LINE_SPECIAL LIKE DATA_SET-DATA_LINE,
NEED_LINE_SPECIAL TYPE C,
DSN_TYPE(8) TYPE C.
DATA: FCODE(4) TYPE C,
DATE TYPE D,
TIME TYPE T,
RC(10) TYPE C,
ERRMSG(100) TYPE C,
PRINTJOB_CREATED(1) TYPE C,
PRINTJOB_CLEARED(1) TYPE C,
PRINTJOB_LIST(1) TYPE C,
DISPLAY_MODE(1) TYPE C,
LINE_MAX TYPE P VALUE '100000',
NEW_SCREEN_300(1) TYPE C,
MULTI_PRINT_300(1) TYPE C,
PRINT_ALL_300(1) TYPE C,
PRINT_COUNT_300 TYPE I,
SHOW_USER_100 TYPE C VALUE ' ',
ERROR_DISPLAY_LEVEL TYPE C VALUE '9',
NEXT_ERROR_DISPLAY_LEVEL TYPE C,
PREV_ERROR_DISPLAY_LEVEL TYPE C,
START_300(5) TYPE C, END_300(5) TYPE C,
SEP LIKE SY-VLINE,
DEFAULT_PRI,
TSP01_BUF LIKE TSP01,
TSP01_CURLINE LIKE SY-STARO,
TSP01_CURCOL LIKE SY-CUCOL,
TSP01_CURROW LIKE SY-CUROW.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
END OF DATA_SET_LINE.
DATA: STATUS LIKE SY-SUBRC.
DATA: WGF_MESSAGE(80).
DATA: H_PATH(20) TYPE C.
DATA: H_MASK(20) TYPE C VALUE ',.pdf ,.pdf. '.
DATA: FILE_NAME(20).
DATA: FILENAME LIKE RLGRAP-FILENAME.
DATA: IMPORT(132).
PARAMETERS: IDENT(5) TYPE C.
PERFORM GET_OTF_TAB.
LOOP AT OTF_PAGE.
OTF_TAB-TLINE = OTF_PAGE.
APPEND OTF_TAB.
ENDLOOP.
CALL FUNCTION 'SX_OBJECT_CONVERT_OTF_PDF'
EXPORTING
FORMAT_SRC = 'OTF'
FORMAT_DST = 'PDF'
DEVTYPE = 'ASCIIPRI'
LEN_IN = LEN_IN
IMPORTING
LEN_OUT = LEN_OUT
TABLES
CONTENT_IN = OTF_TAB
CONTENT_OUT = ITAB2
EXCEPTIONS
ERR_CONV_FAILED = 1
OTHERS = 2.
PERFORM GET_PATH USING 'PDF_FILE'.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'BIN'
BIN_FILESIZE = LEN_OUT
TABLES
DATA_TAB = ITAB2
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
*& Form GET_OTF_TAB
FORM GET_OTF_TAB.
DATA: PART(4) VALUE '0001',
BEGIN OF MSG,
A(40),
B(40),
C(40),
END OF MSG.
REFRESH DATA_SET.
DATA_SET_LINECOUNT = 0.
DATA_SET_IS_OTF = ' '.
OTF_PAGES = 0.
REFRESH OTF_PAGE_INDEX.
CALL 'RSPOACSD'.
SELECT * FROM TST05 WHERE DTHREAD = 'X'.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'TYPE' FIELD TST05-DTYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DSN_TYPE = TST05-DTYPE.
IF DSN_TYPE(3) = 'OTF'.
DATA_SET_IS_OTF = 'X'.
ENDIF.
ENDIF.
IF STATUS <> 24. EXIT. ENDIF.
ENDSELECT.
DATA_SET_VALID = 'X'.
DATA_SET_MAX_LINES = ( LINE_MAX * '1.1' ) + 100.
DO.
CLEAR: DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 36.
WHILE STATUS = 36.
CALL 'RSPOACSD'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ADD 1 TO PART.
IF DATA_SET_IS_OTF = ' '.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'TYPE' FIELD DSN_TYPE
ID 'PART' FIELD PART
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ELSE.
CALL 'RSPOAOSD'
ID 'ID' FIELD IDENT
ID 'PART' FIELD PART
ID 'TYPE' FIELD DSN_TYPE
ID 'RECTYP' FIELD 'VYL----'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
ENDIF.
IF SY-SUBRC NE 0. EXIT. ENDIF.
CLEAR: DATA_SET_LINE, DATA_SET_LENGTH.
CALL 'RSPOARSD'
ID 'BUFF' FIELD DATA_SET_LINE+5
ID 'DATALEN' FIELD DATA_SET_LENGTH
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDWHILE.
ENDIF.
IF STATUS <> 0 AND STATUS <> 40. EXIT. ENDIF.
DATA_SET = DATA_SET_LINE.
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
APPEND DATA_SET.
ADD 1 TO DATA_SET_LINECOUNT.
IF DATA_SET_IS_OTF = ' '.
IF DATA_SET_LINECOUNT >= DATA_SET_MAX_LINES.
CLEAR DATA_SET.
APPEND DATA_SET.
MOVE '----
' TO DATA_SET-DATA_LINE.
APPEND DATA_SET.
CLEAR DATA_SET.
APPEND DATA_SET.
WRITE: 'Abbruch nach'(029) TO MSG-A.
WRITE: DATA_SET_MAX_LINES TO MSG-B.
WRITE: 'Zeilen.'(030) TO MSG-C.
CONDENSE MSG.
DATA_SET-DATA_LINE = MSG.
APPEND DATA_SET.
EXIT.
ENDIF.
ELSE.
MOVE DATA_SET_LINE-DATA_LINE TO OTF_PAGE.
APPEND OTF_PAGE.
IF OTF_PAGE(2) = 'EP'.
ADD 1 TO OTF_PAGES.
IF OTF_PAGES >= OTF_MAX_PAGES.
MESSAGE S229(PO) WITH OTF_MAX_PAGES.
EXIT.
ENDIF.
ELSEIF OTF_PAGE(2) = 'OP'.
OTF_PAGE_INDEX-LINE_NUM = DATA_SET_LINECOUNT.
APPEND OTF_PAGE_INDEX.
ENDIF.
ENDIF.
ENDDO.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'RSPOACSD'.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
CALL 'RSPOACSD'.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG.
ENDIF.
ENDFORM. " GET_OTF_TAB
*& Form GET_PATH
FORM GET_PATH USING P_FILENAME.
CLEAR: H_PATH, FILE_NAME.
FILE_NAME = P_FILENAME.
CALL FUNCTION 'WS_QUERY'
EXPORTING
QUERY = 'CD' "// Current Directory
IMPORTING
RETURN = H_PATH.
CONCATENATE FILE_NAME '.pdf' INTO FILE_NAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = FILE_NAME
DEF_PATH = H_PATH
MASK = H_MASK
MODE = 'O'
IMPORTING
FILENAME = FILENAME"dbname
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " GET_PATH
Regards
Sudheer -
Where does ATP feed back from APO gets stored (in which table) in R/3?
Hi ALL,
I am facing problem in finding in which table the response in R/3 gets stores after ATP check is done in APO?
I will be grateful, if you experienced guys can help me find it?
Thanks in advance
ReeteshI would be surprised if the ATP feedback from APO gets stored in R/3 table. When a product location is flagged as GATP relevant, and when say a sales order is created in R3 (or any other business event flagged as ATP relevant) an RFC call is done to APO system and all calculations are done then and there in APO-- only confirmed quantity is sent back to R3. What you see in R3 is confirmed quantity and there is no other thing sent back to R3.
-
Problem retreving data from cluster table
Hi friends,
Iam facing a problem while retreving data from a cluster table..
select knumv
kposn
krech
kawrt
kbetr
waers
kpein
kmein
kwert
from konv
into table gt_konv
where knumv in s_agnm.
In s_agnm i have 8 entries ie: iam giving manually 8 entries in s_sgnm-low.
If i do the above way iam getting exactly the 82 entries which i have in KONV table.. This is perfect..
But when iam using for all entries iam getting only 58 records from the KONV table..
ie :
SELECT KNUMV
KPOSN
KRECH
KAWRT
KBETR
WAERS
WAERS
KPEIN
KMEIN
KWERT
FROM KONV
INTO TABLE ITAB1
FOR ALL ENTRIES IN ITAB
WHERE KNUMV = ITAB-F1
Here F1 is the field which is same as S_SGNM as above and it also contains same number of records as above
Now when iam running the 2nd select statment iam getting only 58 entries ... instead it should get 82 entries as above...
Can any one tell me how to correct..
Regards
Kumareven if i use all the key fields , its giving me the same results 58 reocrds, instead it should give me 82.
select knumv
kposn
stunr
zaehk
from konv
into table gt_tybh
where knumv in s_agnm.
if gt_tybh is not INITIAL.
sort gt_tybh by agreement_number kposn stunr zaehk.
select knumv
kposn
krech
kawrt
kbetr
waers
kpein
kmein
kwert
from konv
into table gt_konv
for all entries in gt_tybh
where knumv = gt_tybh-agreement_number and
kposn = gt_tybh-kposn and
stunr = gt_tybh-stunr and
zaehk = gt_tybh-zaehk.
In the above iam getting all the 82 records for the select-options s_sgnm..
later iam trying to get the other fields form the same konv table by using for all entries... here even if iam using all the key fields also its not getting me the total 82 records...
Initially for s_sgnm which contains 8 values , for those 8 values iam getting 82 records it table gt_tybh. But later when iam using for all entries iam not getting those 82 records in the 2nd select statment in the internal table gt_konv.
Why is this happening...
can any one correct it..
Regards
Kumar -
Problem in Reports(ralated to table BSEG)
Dear ALL,
when programs(standard and Z programs) Retriving the data from BSEG, i am getting timeout error.
I have one more problem that is, in BSEG table we have around 25 Million records (around 100+ companies implemented fico), so while accessing this table most of the time we are getting timeout error. From the last 6 years we did not do data archiving.
If one or more programs accessing this table then it will affect the performance. So what do you propose is Data Archiving is the solution?
Thanks for your time.
Regards
ManoharHi Manohar,
Archiving may compact your table size, but those data may not be available to view.
I prefer you to execute the report in background. Ckeck in SM37, if the job is finished, it ready for executing.
Abhisek -
Problems getting a resultset out of a stored procedure
We're having a problem getting a resultset out of a stored procedure with JDBC. The third parameter for the procedure is an out REF CURSOR. Connection to the database is fine, we just keep getting the following error when we do the GetCursor(3) statement:
ORA-00942: table or view does not exist
We know for definate that something is coming out of the database as we can call it from ODBC without any errors. If anyone's got any ideas as to what's going wrong please let me know!
The cut-down code follows:
public class JSMatt extends HttpServlet {
protected void doGet(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException {
PrintWriter out = resp.getWriter();
// Load the Oracle JDBC driver
out.println("Registering driver...");
Class.forName("oracle.jdbc.driver.OracleDriver");
// Connect to the DB
out.println("Connecting to database...");
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@computer:db",
"username", "password");
// Create a statement using a stored procedure
out.println("Creating query...");
OracleCallableStatement st = (OracleCallableStatement)conn.prepareCall ("BEGIN archive.spSrchLanguage (?, ?, ?); END;");
st.registerOutParameter(3, OracleTypes.CURSOR);
st.setInt(1, 0);
st.setInt(2, 12);
st.execute();
ResultSet rs = ((OracleCallableStatement)st).getCursor(3);
nullFurther study of my colleagues issue reveals that the problem only occurs where we are using a synonym for our package even though the user has permissions to run it (and indeed does when using ODBC or OLEDB).
If we call a procedure in our package which does not return a ref cursor then the procedure is getting called fine (as can be evidenced by the database inserts etc within the procedures).
Ideally we would like to use a synonym (I like to keep nice clean tidy schemas!) so if anyone knows how to get around it please let us know.
Regards
Jason.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Matthew Butt ([email protected]):
We're having a problem getting a resultset out of a stored procedure with JDBC. The third parameter for the procedure is an out REF CURSOR. Connection to the database is fine, we just keep getting the following error when we do the GetCursor(3) statement:
ORA-00942: table or view does not exist
We know for definate that something is coming out of the database as we can call it from ODBC without any errors. If anyone's got any ideas as to what's going wrong please let me know!
The cut-down code follows:
public class JSMatt extends HttpServlet {
protected void doGet(HttpServletRequest req, HttpServletResponse resp)
throws ServletException, IOException {
PrintWriter out = resp.getWriter();
// Load the Oracle JDBC driver
out.println("Registering driver...");
Class.forName("oracle.jdbc.driver.OracleDriver");
// Connect to the DB
out.println("Connecting to database...");
Connection conn = DriverManager.getConnection("jdbc:oracle:thin:@computer:db",
"username", "password");
// Create a statement using a stored procedure
out.println("Creating query...");
OracleCallableStatement st = (OracleCallableStatement)conn.prepareCall ("BEGIN archive.spSrchLanguage (?, ?, ?); END;");
st.registerOutParameter(3, OracleTypes.CURSOR);
st.setInt(1, 0);
st.setInt(2, 12);
st.execute();
ResultSet rs = ((OracleCallableStatement)st).getCursor(3);
<HR></BLOCKQUOTE>
null
Maybe you are looking for
-
How do I remove a card from my apple account?
I Added a pre paid gift card to my account that I had got for my birthday a while ago and spent some money, now, the card has no money on it but the iTunes Store and App Store require me to put in the security code and redeem my card again, i cannot
-
I only use my laptop, but it never seems to register with ITunes. I'm tired of having to re enter my billing information for every song I buy. How do I get ITunes to accept that the computer I use is really me.
-
Just upgrade ipad 3 to ios 7.1.1 and i can't play videos on you tube using safari
Hello, i just upgrade my ipad 3 to ios 7.1.1 and i can't see most of the videos on you tube. I use Safari and I don't have the you tube app installed. Videos that used to play without problems, now the screen goes black and that's it, without any mes
-
Installing Vista on a new hard drive
I replaced my hard drive with a seagate hd with the same GB , I inserted the recovery dics and everything seemed to be going good until the end and then it tells me that windows could not be instaaled on this hardware! can anyone help me? This questi
-
Problems to run the patch for 9.2.02
HI Gurus, I have some problem applying the 9.2.0.2 patch on oracle 9.2.01 base installation. Since I'm really a DBA, not sure how to execute the following pre_install statement: Drop the xmlconcat function by running the following commands: drop publ