Data is not getting updated in DB table

hi all
i am doing IDOC to jdbc scenario
i am triggering idoc from R/3 and the data is going into DB table
sender side:       ZVendorIdoc
receiver side:
DT_testVendor
Table
    tblVendor
      action       UPDATE_INSERT
      access      1:unbounded
        cVendorName 1
        cVendorCode 1
     fromdate    1
     todate      1
      Key
        cVendorName 1
if i trigger idoc for example vendor 2005,2006 and 2010 data is getting updated in the table
but again if i trigger idoc for same vendor nos data does not get updated in DB table while message is successfull in moni and RWB both
plz suggest if any change need to be done to update the data
Regards
sandeep sharma

Hi Ravi
you are right, vendor no is my key field . problem is when i send data again then it should Update the data but it's not updating the data again
i did on exp with this : i deleted all the record from the table and then triggered idoc for vendor 2005 , 2006,2010 after this data is updated in the table i deleted the rows for vendor no 2006 and 2010 and kept the row for vendor 2005
then i again trigered the idoc for vendor no 2005,2006 and 2010 now this should update and it should insert rows for vendor no 2006 and 2010 but i am surprised its not updating the data
Thanks
sandeep

Similar Messages

Data is not getting updated in table using RFC

Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
Sari

HI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh

The currency is not getting updated in the table VBAP

Hi ,
The currency is not getting updated in the table VBAP. The currency was suppossed to be copied from the header table VBAK for a Sales Order. When the user creating a Sales Order the currency WAERK is not shown in VBAP table. VBAK-WAERk is in EUR . Does anyone know why is this happenning?
Currency is maintained in the Customer Master, Material Master and Sales Org. Any suggestions?.
Also it is happened for only one line item in a set of line items , Other line items did display the currency field.
The net Value has data in it .
The system is ECC 5.0
Regards,
Senthil

Dear Senthil,
Please apply the following notes (if they apply to your support pack level) and retest:
1460621 VBAP-WAERK is deleted after the sold-to party is changed
1426441 VBAP-WAERK deleted for subitems
1493998 VBAP-WAERK deleted for subitems
This should resolve the issue. I hope this helps.
Best regards,
Ian Kehoe

Field TSABR is not getting updated in MHIS table.

Hi All,
The field TSABR (Scheduling Status: New Start Called) is not getting updated in MHIS table.
Please do tell me how it will get updated.
What is a logic behind it.
Many Thanks in advance.
Regards,
Sanjay Tiwari

Hi,
I checked it my system and that field was getting updated ..
For calls with status "New start called " will get updated in MHIS and for these call you will only have the field scheduling status :planned date called " as marked . pls check
regrds
pushpa

TDS amount not getting updated in the table under the field QBSHB

Dear Friends,
The TDS amount entered while booking the vendor invoices through MIRO T-cde, is not getting updated in the table BSEG under the field QBSHB.
Kindly let me know the reason for the same and guide me to correct it
TIA.
Regards,
Vincent

HI Vincent,
Bseg-QBSHB field is relavent for classic WT.
I hope you are using the EWT.
Hence if you post a document through MIRO it will not update
(but if you post document FB60 it will update but wrongly).
Reason is Miro document is posted through interface.
Hence SAP is suggested to not refer the Bseg-QBSHB and etc., fields.
refer only with_item table.
Please refer the below replay from SAP
Please refer the below note .363309
Please review attached note 363309 for detailed explanation
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax' button."
(BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) field is not relavent for
Extended withholding tax and not suppose to use in report FBL1N.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
regards
Madhu M
Edited by: M Madhu on Jan 31, 2011 1:19 PM

Data is not getting updated in R3 from CRM

Hi All,
I have a small query pertaining to CRM Middleware.
We have extended the standard scenario using EEWB for sending few customer fields thru CUSTOMER_H. This is assigned to the adapter in R3AC1.
The data is getting populated in the structure correctly. But the problem is that the Z* field is not getting updated in R3. The more strange thing is that it is getting overwritten in CRM by data from R3.
I have checked the problem and found out that the updateflag for z* field is missing. But the problem is that I donot know, how to populate the update flag for the field.
Is there any customization or setting in EEWB for updating the flag?
Please help... Please let me know if u want more informaiton.
Thanks
Sanu

Sanu,
The reason for R3 data getting overwritten in CRM is because the BSS_CENTI has a blank record
and BSS_CENTIX structure might have a X indicator within BAPIMTCS structures.
BSS_CENTI holds central data for the customer and BSS_CENTIX holds the change flags for the fields in central data.
To fix this issue, you have to use CRM table SMOFSUBINT and configure a custom function module which basically yanks the 2 structures from BAPIMTCS table.
Note:- You do this ONLY if you don't want custom fields from ECC to update CRM. Otherwise you have to make sure the BSS_CENTI and BSS_CENTIX structures are consistent in CRM and ECC.

If Records of different list items are entered, then the data is not getting inserted in the table.

Hi Everyone,
A Very Very Happy, Fun-filled, Awesome New Year to You All.
Now coming to the discussion of my problem in Oracle Forms 6i:
I have created a form in which the data is entered & saved in the database.
CREATE TABLE MATURED_FD_DTL
ACCT_FD_NO    VARCHAR2(17 BYTE)               NOT NULL,
CUST_CODE     NUMBER(9),
FD_AMT        NUMBER(15),
FD_INT_BAL    NUMBER(15),
TDS           NUMBER(15),
CHQ_NO        NUMBER(10),
CREATED_DATE DATE,
CREATED_BY    VARCHAR2(15 BYTE),
PREV_YR_TDS   NUMBER(15),
ADD_FD_AMT    NUMBER(15),
DESCRIPTION   VARCHAR2(100 BYTE),
P_SAP_CODE    NUMBER(10),
P_TYPE        VARCHAR2(1 BYTE)
The form looks like below:
ENTER_QUERY     EXECUTE_QUERY     SAVE     CLEAR     EXIT
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
R
W
P
List Item
There are 5 push buttons namely ENTER_QUERY, EXECUTE_QUERY, SAVE, CLEAR, EXIT.
The table above is same as in the form. All the fields are text_item, except the P_TYPE which is a List_Item ( Elements in List Item are R, W & P).
The user will enter the data & save it.
So all this will get updated in the table MATURED_FD_DTL .
I am updating one column in another table named as KEC_FDACCT_MSTR.
and
I want this details to get updated in another table named as KEC_FDACCT_DTL only if the P_TYPE='P'
CREATE TABLE KEC_FDACCT_DTL
FD_SR_NO                NUMBER(8)             NOT NULL,
FD_DTL_SL_NO            NUMBER(5),
ACCT_FD_NO              VARCHAR2(17 BYTE)     NOT NULL,
FD_AMT                  NUMBER(15,2),
INT_RATE                NUMBER(15,2),
SAP_GLCODE              NUMBER(10),
CATOGY_NAME             VARCHAR2(30 BYTE),
PROCESS_YR_MON          NUMBER(6),
INT_AMT                 NUMBER(16,2),
QUTERLY_FD_AMT          NUMBER(16,2),
ITAX                    NUMBER(9,2),
MATURITY_DT             DATE,
FDR_STAUS               VARCHAR2(2 BYTE),
PAY_ACC_CODE            VARCHAR2(85 BYTE),
BANK_CODE               VARCHAR2(150 BYTE),
NET_AMOUNT_PAYABLE      NUMBER,
QUATERLY_PAY_DT         DATE,
CHEQUE_ON               VARCHAR2(150 BYTE),
CHEQUE_NUMBER           VARCHAR2(10 BYTE),
CHEQUE_DATE             DATE,
MICR_NUMBER             VARCHAR2(10 BYTE),
PAY_TYPE                VARCHAR2(3 BYTE),
ADD_INT_AMT             NUMBER(16,2),
ADD_QUTERLY_FD_AMT      NUMBER(16,2),
ADD_ITAX                NUMBER(16,2),
ECS_ADD_INT_AMT         NUMBER(16),
ECS_ADD_QUTERLY_FD_AMT NUMBER(16),
ECS_ADD_ITAX            NUMBER(16)
So for the push button 'Save' , i have put in the following code in the Trigger : WHEN BUTTON PRESSED,
BEGIN
     Commit_form;
          UPDATE KEC_FDACCT_MSTR SET PAY_STATUS='P' WHERE ACCT_FD_NO IN (SELECT ACCT_FD_NO FROM MATURED_FD_DTL);
          UPDATE MATURED_FD_DTL SET CREATED_DATE=sysdate, CREATED_BY = :GLOBAL.USER_ID WHERE ACCT_FD_NO = :acct_fd_NO;
IF :P_TYPE='P' THEN
     INSERT INTO KEC_FDACCT_DTL
          SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
               GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
               FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
               MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
               NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
          FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
     WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
COMMIT;
     MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
     MESSAGE(' ',no_acknowledge);
END;
If P_TYPE='P' , then the data must get saved in KEC_FDACCT_DTL table.
The problem what is happening is,
If i enter the details with all the records as 'P' , the record gets inserted into the table KEC_FDACCT_DTL
If i enter the details with records of 'P' and 'R' , then nothing gets inserted into the table KEC_FDACCT_DTL.
Even the records with 'P' is not getting updated.
I want the records of 'P' , to be inserted into table KEC_FDACCT_DTL, even when multiple records of all types of 'P_Type' (R, w & P) are entered.
So, can you please help me with this.
Thank You.
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
Oracle Forms Builder 6i.

Its not working properly.
At Form_level_Trigger: POST_INSERT, I have put in the following code.
IF :P_TYPE='P'THEN
INSERT INTO KEC_FDACCT_DTL
SELECT FD_SR_NO, NULL, MATURED_FD_DTL.ACCT_FD_NO, FD_AMT, INT_RATE, P_SAP_CODE,
GROUP_TYPE, (TO_CHAR(SYSDATE, 'YYYYMM'))PROCESS_YR_MON,
FD_INT_BAL, (FD_INT_BAL-MATURED_FD_DTL.TDS)QUTERLY_FD_AMT , MATURED_FD_DTL.TDS,
MATURITY_DATE, P_TYPE, NULL, NULL, (FD_INT_BAL-MATURED_FD_DTL.TDS)NET_AMOUNT_PAYABLE,
NULL, NULL, CHQ_NO, SYSDATE, NULL, 'CHQ', NULL, NULL, NULL, NULL, NULL, NULL
FROM MATURED_FD_DTL, KEC_FDACCT_MSTR
WHERE KEC_FDACCT_MSTR.ACCT_FD_NO=MATURED_FD_DTL.ACCT_FD_NO;
END IF;
MESSAGE('RECORD HAS BEEN UPDATED AS PAID');
MESSAGE(' ',no_acknowledge);
It worked properly when i executed first time, but second time , in database duplicate values were stored.
Example: First I entered the following in the form & saved it.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
250398
52
50000
6000
0
600
0
45415
P
5678
int1
320107
56
100000
22478
3456
2247
0
45215
R
456
320108
87
50000
6500
0
650
0
21545
W
0
In the database, in table KEC_FDACCT_DTL, the ACCT_FD_NO:250398 with P_TYPE='P' record was inserted.
ACCT_FD_NO
P_TYPE
250398
P
But second time, when i entered the following in the form & saved.
ACCT_FD_NO
CUST_CODE
FD_AMT
FD_INT_BAL
PREV_YR_TDS
TDS
ADD_FD_AMT
P_SAP_CODE
P_TYPE
CHQ_NO
DESCRIPTION
260189
82
50000
6000
0
600
0
45415
P
5678
interest567
120011
46
200000
44478
0
4447
0
45215
R
456
30191
86
50000
6500
0
650
0
21545
W
56
In the database, in the table KEC_FDACCT_DTL, the following rows were inserted.
ACCT_FD_NO
P_TYPE
250398
P
250398
P
260189
P
320107
R
320108
W
There was duplicate of 250398 which i dint enter in the form second time,
All the other P_TYPE was also inserted , but i want only the P_TYPE='P' to be inserted into the database.
I want only those records to be inserted into the form where P_TYPE='P' and duplicate rows must not be entered.
How do i do this???

Not getting updating in a table....

Hi friends,
Currently i working on integration of apex with ebs R12.....And i have successfully integrated following the rod west document....
I created one DB application in my sample schema that is associated with apex 4.0.....
Application details:
*) login page(where i will be giving username and password)
*) page 1 (consist of several form fields, like
--->name:
--->module:
--->projects:
----->email:
the above are the fields, if i put any entries in the above field means, it will get automatically inserting in the report column, which is also in the same page consist of the above fields in the table manner...
since this report table consist of an edit icon in front, if i clicked the edit icon of an one row means, it will go to another page..
*) i.e. page 3(consist of the same fields with entries in it automatically corresponding to the each and every row, suppose if i want to update any changes means i can update in it....
this is my application that i developed it is working well with in the sample schema apex 4.0..
What i did is i created a new workspace with APPS schema in it...and i have imported my application that i developed in sample schema to APPS schema....
Since after importing to APPS schema...when i tried to open the application, it is not showing any datas in it...That is due to the tables that are supporting the application is not in APPS schema, so what i did is i have given grant privilege to the respective tables and also i have created a synonym for accessing the table in APPS schema for supporting the application.....
Now if i tried to put any entries in the form in page 2, it is getting inserting in the report column which is also in the page2....
But my problem starts here, if i clicked the edit icon symbol in each and every row of the report column it is going to the page 3 which has a respective form fields, but it is not showing any entries in it automatically, and if i tried to put any entry in it, it is not getting updating in the report table......
why this problem occurred for my application in APPS schema....But my application works very well within the sample schema......why it is not showing any entries in the form automatically soon after i clicked the edit icon in each and every row.....
i couldn't know what is the real problem behind this..... help me friends,
Thanks in Advance..
Regards,
Harry...

Goodmorning,
Have you had a look for notes, Depending on the release and industry sollution you can find several notes on this subject (start looking for message RW 022).
Annemarie de Bruijn

Master Data is not Getting Updated Properly.

Dear Expert,
I am trying to pull the data by Info package but The text is not getting updated.
The Master data object is 0BPARTNER . To update this Master data , we ghave 2 info packages
0BPARTNER_ATTR and 0BPARTNER_TEXT. But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
What could be the Reason for this and How can I solve this issue ?
Tahnks,
Utpal

Hi,
Could you please check the data in RSA3.
If everything is there in R/3 side.Then,please check are you giving any
condition in the infopackage .
Please run the infopackage without giving any condition.
Thanks,
Saveen Kumar

Mat doc not getting updated in AFRU table

Hi All,
While doing the confirmation cancellation for the rework order the referance material document is not getting updated in the AFRU table.
The referance operation set is used for the rework production order and there are no component assigned ,the components to be issued are entered at the time of confirmation.
The material document is getting updated in case of confirmation in AFRU table but the same is not getting updated in WABLNR field in case of cancellation of confirmation.
When I checked MSEG all the material documents are observed with referance to the order number but the same are not displayed in AUFM and AFRU table.
This behaviour is not obeserved in case of normal production orders. what can be the reason behind the same?
Regards
Ankush

Dear Ankush
please see FAQ note 540392 question 11.
11. Question:
Despite successful goods movements, the material document is not
updated in field AFRU-WABLNR. Where do I find the document number?
Answer:
As of Release 3.1H, the system provides the reference from
confirmation to material document via table AFWI. The system still
only uses AFRU-WABLNR in the case of header confirmations or
confirmations for an individual operation. With milestone
confirmations or with separate goods movements, in other words goods
movements that are posted in the update program or via requests
(BAPIs, collective entry, mass processing, BDC/PDC), table AFWI is
always supplied due to technical reasons.
BR Sabine

Data is not getting updated in CRM

HI experts,
I am updating the new address and postal codes in ISU.And now if I check these address for buisness partner in CRM. Its not getting updated.
why this is happening?
Is there any BDOC used in this case then how we can check that BDOC?
Thanks,
Jassi

Hello
I am sure that the problem occurs due to this.
You need to know the error message. To do this:
1) Choose any red document from transaction SMW01
2) Click on button "Show BDoc message errors/receivers" (9th button from the left)
3) In the opening window there is a button "Errors". There is where you can find the error message.
I hope it helps. Please, provide points if helpful.
Joaquin

Using PC data targets not get updated...

Hai murali/friends...
now in my daily running process chain i have one error . i.e. in that if i use transaction rspcm the daily running chain is showing yellow colour...not showing in green colour and then i have displayed , display varient and then it shows one execute info package as yelloow colour i tried to right click on that and i displayed display messages and then it shows
"INFORMATION WAS STORED IN SOURCE SYSTEM"
to avoid this i mean i need to get data succefully updated but instead of this am getting above messages and my data targets also not updated succefully ...what will be the solution??? and in PSA data is available.....
help me friends.... last day onwards am trying to solve this issue but i can not......

thnak you very much sreekanth....
but while trying to load manually .. it is saying that already already data is there in delta... we cant not process this request...
like that am getting ... am totally ... confused sreekanth... in other messages am getting
There is a discrepancy between the confirmation and deletion of qRFC-LUWs
Message no. RSQU016
Diagnosis
When data was confirmed and deleted in the qRFC queue, the system found a discrepancy between the number of newly confirmed LUWs ( 2282) and the number of LUWs to be deleted ( 3424).
Where more LUWs are to be deleted than were previously confirmed, a previous delete attempt was terminated.
The LUWs were confirmed but not completely deleted from the qRFC and tRFC tables. The confirmation already ensures that the data is not transferred into the BW again with a subsequent request.
Delta extraction was continued.
Procedure
You do not need to do anything urgently.
If the message also arises during all subsequent delta requests, contact SAP Support with the message number at hand. In this case, there is a danger that the qRFC and tRFC tables run at full capacity, which may also affect other applications.

KNA1-UPDAT/ KNA1-UPTIM ,Confirmation date/time not getting updated CRM/ECC

Hi
I found a case where, when Gen. data of BP is changed in CRM, Table BUT000 is updated with corresponding date and time of change. This chaged data is replicated to ECC but in KNA1 table UPDAT- update date and UPTIM- update time fields are not updated.
Can anyone suggest possible solution for this.
Thanks
Rahul

Hi
I found a case where, when Gen. data of BP is changed in CRM, Table BUT000 is updated with corresponding date and time of change. This chaged data is replicated to ECC but in KNA1 table UPDAT- update date and UPTIM- update time fields are not updated.
Can anyone suggest possible solution for this.
Thanks
Rahul

Data is not getting displayed into a table

Hi,
here i used 2 views
Personal info view :--user fill the details in this and clicks go...Then the user entered details should be displayed into a table view...
In context of personalinfoView i took a node as "personal" and added the details as attributes to personal node,and while mapping i mapped Controller data with PersonalinfoView...
No i have to retrive data from controller component and i have to display in table
But the table is getting displayed but no values are getting displayed..
the code for getting data from component controller i used in inplug method od table is
String tblName=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getName();
    if((tblName!=null)&& tblName.equals(""))
          wdContext.currentPersonalElement().setName(tblName);
    String tblFirstName= wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getFirstName();
     if(tblFirstName!=null && tblFirstName.equals( ""))
          wdContext.currentPersonalElement().setFirstName(tblFirstName);
    String tblEmail=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getEmail();
     if(tblEmail!=null && tblEmail.equals(""))
       wdContext.currentPersonalElement().setEmail(tblEmail);
    String tblCountry=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getCountry();
    if(tblCountry!=null && tblCountry.equals(""))
        wdContext.currentPersonalElement().setCountry(tblCountry );
    String tblGender=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getGender();
    if(tblGender!=null && tblGender.equals(""))
        wdContext.currentPersonalElement().setGender(tblGender);
    String tblSports=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getSports();
    if(tblSports!=null && tblSports.equals( ""))
        wdContext.currentPersonalElement().setSports(tblSports );
    String tblOthers=wdThis.wdGetUICompController().wdGetContext().currentPersonalElement().getOtherinterests();
    if(tblOthers!=null && tblOthers.equals(""))
        wdContext.currentPersonalElement().setOtherinterests(tblOthers );

Hi Padma
You said you have context structure like this
Personal
Name
Firstname
Email
if you set personal node's cardinality 1..1 it can hold only one person's Information.i.e. personal node has only one element.
if you set the personal node's cardinality 0..n it can hold 0 to N nor of person's data.i.e. personal node has 0 to n elements
If Personal node has cardinality 0..n and it has 10 elements holding 10 person's data, and you are displaying it in a table control. If we set the selection property single only one row can be selected at a time. if it is Multi user can select multiple rows from the table.
Now in your case, there is no need to take cardinality as 0..n. Because you are holding information of one person, so the cardinality is 1..1
Regards
Abhimanyu L

Date Column not getting sorted in a table in web Dynpro Java

Hi All,
I am facing an issue while sorting the date column in a table in my web dynpro java application.
When the date is displayed in the sql format in tha table, I am able to sort the date column successfully but when we convert the date field from sql format to util format in our table and then sort it does not work.
Kindly let us know the steps to be followed in this case to sort the date column of a table in Simple Date format as we do not want date in the sql format to be displayed.
Thanks & Regards,
Anurag

Hi,
You might want to check whether both your browser's language settings are identical. The browser language could also determine the date format.
As a workaround, you could add an extra attribute to your context, and set the calculated property to 'true'.
In your table, add a new column and bind to this new attribute, and hide your original date column
If you sort using the date column that's hidden now, you could use the calculated field to fixed-format your date the way you prefer (by using the SimpleDateFormatter class for instance)
Cheers,
Robin

Data is not getting updated in DB table

Similar Messages

Maybe you are looking for