Problems importing iPhoto 06 files into Aperture 2.1

I have iphoto 06 on a 2006 Mac Book Pro with OS X 10.4.11. I've upgraded RAM to 2Gb and have recently installed Aperture 2.0 with the upgrade to Aperture 2.1.
I'm trying to drag individual RAW (12Mb) files from iPhoto 06 into Aperture 2.1 via the File > show iPhoto Browser command. Unfortunately, Aperture just seems to hang at this stage. The program appears to be importing (little wheels spinning etc) however, nothing happens. I usually loose patience at the 20-min stage and force quit. I figure even with 2Gb of RAM it should not take +20-min to transfer one 12Mb file. Please note i've tried dragging the files in as both Masters and Referenced Masters and it makes no difference Aperture still seems to hang.
Any advice?
Thx,

Aperture, actually OS X, goes by camera make and model not by file. The reason being that RAW files from the same manufacturer with the same file extension but from different camera models can and often do have different formats.
So it's not possible to talk about adding a certain manufactures file or extension you need to specify the camera make and model. Then you can see what version of Aperture and Camera RAW bundle you need to accomplish that.
See http://www.apple.com/aperture/specs/raw.html for the list of RAW cameras currently supported. The only Kodak that shows up is the DCS Pro/SLR n which was supported starting back with Aperture 2 in Tiger or Leopard.
regards
Message was edited by: Frank Caggiano

Similar Messages

Problems importing iPhoto library into Aperture 3

When I got my mac, I imported a collection of images on an external drive into iPhoto, and worked with them there. I also imported images from memory cards directly into iPhoto.
During the original import, I selected the "leave files in place" option. For the direct imports from memory cards, I just imported them. I didn't realize that it would bundle everything into a single file when I did that, and I wasn't expecting what I ran into next...
I finally purchased a copy of Aperture 3 for its more powerful tools and smoother workflow. After installing it, I imported my iPhoto library into it, with the leave in place option... and found that Aperture couldn't load most of the images. It shows placeholder frames instead.
I have tried reconnecting the masters, to no avail; their paths are correct, so they're not changing, and Aperture insists that the masters are missing before and after.
I tried repairing the database with the database first aid tool, and it had no effect.
I tried rebuilding the database, and the result was disastrous; after that I had *no* images in Aperture. None. Even the few that I'd imported directly from media into Aperture were gone.
So I restored my Aperture database from my TimeMachine backup which impressed me with how easy it was, and now I'm back where I started... most of the images imported from iPhoto are inaccessible in Aperture, so I can't use Aperture for most of my image editing, even though iPhoto reads them without any trouble.
Any suggestions?

Frank:
Yes, all of the images are available in iPhoto, whether they're in the iPhoto library, or on the external drive.
Aperture isn't showing any symbol other than the dotted line frame, at least none that I've seen yet. I thought at first that it was the images on the external drive that were missing, but it's actually showing some of them, and not showing others even in some cases ones in the same folder. If a screenshot would help, I'll capture one (I don't know how to do that in OSX yet, though I suspect it's just a matter of the right key combo?).
CalxOddity: It's an OSX volume, but I'm not sure how to determine which filesystem it's using, or else I'd be more specific.
leonieDF: It is a network volume, one of the Time Capsule drives. Though I knew it would slow down loading, I didn't expect any other problems, since iPhoto doesn't have any.
Thanks!

Problems importing raw files into Lightroom 3.4

I've just dowloaded lightroom 3.4 and now I'm having problems importing raw files into lightroom. I havent had a problem before. Can anyone help me? My camera is a Nikon D7000.

Perhaps a few more details are required. Take a look at the FAQ "How to get help quickly"

I have just imported Iphoto library into aperture library, can I delete now the Iphoto Library ?

Hi, I have juste imported Iphoto library into Aperture Library (did a copy) - can I delete my Iphoto library as I won't use Iphoto anymore ?
Thanks Hélème

Helene,
Both of those things you pointed out are mere *metadata*.
When you imported your iPhoto library, since you did a copy, your libraries are completely independent.
When I was in your situation, I moved my iPhoto library to an external disk and then went to the Aperture library to see how it behaved, even though i was 99.99% sure my iPhoto and Aperture libraries were separate.
nathan

Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

Please be more specific. What Premiere project? What version of Premiere? Which operating system? What CoDecs do the QT fiels use? Are all the video files in the correct folders inside the Premiere project structure? Your description sounds like you are attempting to open a Mac based project on a PC and your video files are either in the wrong location or use a Mac-specific CoDec, hence they cannot be read on a PC.
Mylenium

Problem Importing CR2 Files in Aperture 1.5.6

I recently shot a number of pictures at my sister's wedding using my Canon Digital Rebel XTi. I am now trying to import the RAW files into Aperture (ver. 1.5.6). Aperture will recognize the compact flash card and display the files on the card. When I try to import the files, however, Aperture seems to go through the process of importing the files (the little timer dial runs etc.) but at the end of the import process the pictures do not appear in my project. What could be the problem? I am able to copy the files onto a folder on my desktop but Aperture will not import these files even from that folder. Help!

gah hey im having this problem too
and it all worked last week <?>
formatted flash drive on camera.
downloaded photos from a file reader via flash drive.
camera = canon mk3ds eos
can see previews in apeture (2.1.2) but large image on browser is unsupported.
error message "unsupported image format".
have tried downloading them again and importing them again etc.
both straight into apeture and via hard drive folder.
but it worked last week?
bit upset i love aperture and my new camera now nothing is working well
for info i loaded up canon photo professional which is canons own brand image processor (which is a bit rubbish imho) and the images worked on that.
they will not import to photoshop (an old version)

Problem importing ics files into iCal

Importing ics files into iCal is the problem, but first here is the background on why I'm trying to import.
I have an iMac and iPad, and recently changed my iPhone 3G for an iPhone 4S. Having got the iPhone 4S I have now set up all my devices to use iCloud. In moving iCal to iCloud an extra calendar was created "automatically" in iCal, called "Me". This "Me" calendar contains a partial duplicate of my main calendar, which is called "My Calendar". In fact, some of the events from "My Calendar" seem to have been moved to "Me", and some have been duplicated.
It seems as it I now need to merge the "Me" and "My calendar" calendars to get back to where I was.
I have tried to export one of the calendars and then re-import it into the other. The export seems to work fine, but every single time I try to re-import the ics file iCal crashes at the end of the import process, and the import is not completed.
Can anyone help? This has been driving me absolutely crazy today!
I even tried manually moving events from one calendar to another, but they reappeared. I think this was because my iPhone/iPad were re-syncing via iCloud and overwriting the changes I had just made.
I don't mind if I end up with one calendar with duplicates as I can remove them with iCal Dupe Deleter.
Or if there are any other alternative solutions I'd love to hear them!
All help greatly appreciated!
(P.S. Is it just me, or is Apple software slowly getting as unreliable as Windows used to be? I get more problems with software updates now than when I first got a Mac about 8 years ago!)

Not a great answer but I dragged the attachment either to the finder - app - ical or the icon. It placed it on the calendar. I clicked in and accepted. So, no auto populate. Need to drag and drop. So glad I paid the 20 bucks to upgrade to 10.8

Failure to import iPhoto library into Aperture 3

I am trying out a trial version of Aperture 3. When I tried to import my iPhoto Library into Aperture (and into the Aperture folder) I get an error message saying that it cannot import iPhoto libraries if they are in a version of iPhoto that is older than 7.1.5.
I have a brand new computer and I have the most recent version of iPhoto so what is this all about?
LD

Keep in mind you need to select the iphoto library. To make sure you have selected it should be highlighted in gray.
You may run into additional trouble importing if the library is large. Here is the thread with a crude resolution.
http://discussions.apple.com/message.jspa?messageID=11094080#11094080

Importing iPhoto Books into Aperture

How do I get the books I've created in IPhoto into Aperture?

Short answer is you can't.
When you import your iPhoto library into Aperture any books in iPhoto will be turned into an Album with all the pictures that were in the iPhoto books filmstrip view. You'll have to recreate the book in Aperture's book tool.

Problem importing video files into slideshow in Photoshop Elements 9

I am able to import the files into my slideshow, but it won't let me save it. It reports an error in saving. Help!

When converting the videos try decreasing the bitrate or changing the file type (perhaps to the iPod native .m4v)
Other than that, you could try a different encoder, like iSquint (isquint.org). It's the one that I use and I even have a QT Pro license.

Problem importing MOV files into iPhoto

I am getting an error when importing my iPhone mov files into iPhoto -- "The following file could not be imported. The file is in an unrecognized format". However the file plays ok with Quicktime.
Can someone help me with this? Its a brand new mac and I have the latest iPhoto too.

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Not enough free space on Aperture Library volume to import iPhoto library into Aperture?

I purchased Aperture 3 from the App Store after using the free trial version for a few weeks. I downloaded the program and do not have any images imorted into Aperture yet. I tried to import my iPhoto library using File>Import>iPhoto Library and received this message: There is not enough free space on your Aperture Library volume to import the selected items. It is estimated that you need at least 10GB of free space. I have iPhoto 11 and 25,000 images on iPhoto. I did review the Aperture owners manual and did not find an answer to this.

Well obviously you don't have enough space to import an iPhoto Library that is more than 10 gigs.
But that's not importat right now.
You have the makings of a major problem and you need to address it now.
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do. Purchase an external HD and move your Photos and Music to it. Aperture, iPhoto an iTunes can run perfectly well with the Library on an external disk.
If you don't you will suffer data loss. I can't stress this enough.
Regards
TD

MobileMe Galleries orphaned when importing Iphoto library into Aperture 3

Can anyone advise how I can get my existing MobileMe galleries to be listed into A3. They were uploaded via Iphoto and I imported that library into A3 but the MM galleries are not there. Obviously I have filled in the appropriate boxes etc in preferences.

1) Log in to MobileMe via the web at www.me.com.
2) Click on the PHOTOS icon along the top toolbar.
3) Click the "Gear" button and select the option for "New Album".
4) Give the album title a dummy name like "Aperture Link Dummy" and under the "Syncs with:" selection, choose "Aperture".
5) Once this new album is created, you can now click on each individual MobileMe gallery that you wish to sync with Aperture and the "Lightswitch" button for "Album Settings" will now have the option to "Sync with: Aperture" as well.
6) After making the necessary Album Settings changes for those that you wish to sync with MobileMe, return to your Aperture program and go to PREFERENCES --> WEB.
7) Under the option "Check for new published photos:", select one of the options OTHER than "Automatically" and the "Check Now" button next to it should become clickable.
8) Click "Check Now" and you should immediately see Aperture add a "MOBILEME GALLERY" heading under the Library pane and will begin to import your MobileMe galleries.
This is about as far I've gotten with getting my existing MobileMe galleries into Aperture. Unfortunately, now the problem is that they are no longer linked to their respective albums/events. When in iPhoto, if I made edits to the album/events, the MobileMe gallery would automatically be updated with those changes. I assume this behavior is the same for new galleries created from within Aperture, but it does not seem to affect those galleries that were imported from iPhoto. Let me know if you get anywhere with this issue.

Importing iphoto library into Aperture 3 creates duplicate events

I am so hoping you can help me here.
I started importing my iphoto library that was going well to a point it stopped importing. Looking at Aperture i can see project folders that coincide with the iphoto events but not all of them came across, still not a problem. I choose to import the iphoto library again checked the box to not import duplicates, now the problem, it starts downloading the same library and the same events.
ABOUT TO PULL MY HAIR OUT, HELP IF YOU CAN

Your iPhoto Library may need rebuilding. If you have iPhoto '11 try the following:
First back up your iPhoto Library.
Then lauch iPhoto in "Rebuild" mode by holding down the command and option (or alt) keys when launching iPhoto.
From the "rebuild" panel choose: Rebuild iPhoto Library Database from automatic backup.
Then try again to import into Aperture.
Delete the previous iPhoto imports before you try that, for the "Do not import Duplicates" option does not work recently.
Report back, if this should not work for you.

Help! Can't Import iPhoto Library into Aperture

I have a new MacBook Pro with Lion, Aperture 3, and iPhoto 11.
I followed the pre loaded video directions and every time I receive this message:
"Importing libraries from versions earlier than iPhoto 7.1.5 is not supported. Please upgrade your iPhoto library with iPhoto 7.1.5 or later."
Can anyone help?
Thanks!

Do you receive this error message from iPhoto or from Aperture?
You are supposed to upgrade your iPhoto Libraries to version '11 by opening them in the most recent iPhoto version, before importing to Aperture.
Regards
Léonie

Is it worth importing iPhoto Events Into Aperture?

I hear a lot of people saying to do this but is it worth it or is it just a space hogger? My iPhoto library is roughly 60GB and my Aperture library is 90GB. I keep my raw files in aperture and jpegs in iPhoto.

The latest versions of Aperture and iPhoto can both use the same library, no need to have one for each application.
With one library you avoid the whole space issue. Also I don't see a reason for keeping the Raw and JPG images seperated like that, each in a different application. It would be easier from a management standpoint to have them all in one library.

Problems importing iPhoto 06 files into Aperture 2.1

Similar Messages

Maybe you are looking for