Problems in creation of workbook using Change query local view.

Hi Experts,
I have created a Multiprovider by using union of two infocubes and created a Query based on Multiprovider.  I want to restrict one infocube in Change Query local view for creating new workbooks.  In Query global view we drag and drop the Infocube under Filters, but in the Query local view Filter panel is in disable mode. (My requirement is to create the workbooks using change query local view only)
How can I restrict the one Infocube values in the workbooks by using Change query local view? 
Thanks in advance.
Venkat.

Hi Venkat Prasad
As you told that the query is on multi provider and the view is not allowing to declare/define filter value
Just drag the infoprovider info object avilable under packet dimension to rows and right click on it restrict by selecting the name of the info provider when u right click it will show you the option of restrict once u click on it,it will takes to u a pop up where you can able to see the name of info providers and you specify according to it and finally in the display of results if you dont want to to display the info provider name then just right click on the 0infoprovider object under rows go to properties then choose hide option under display.
Hope its clear a little..!
Thanks
K M R
**Assigning points is the only way of saying thanks in SDN***
>
venkata prasad wrote:
> Hi K M R,
>
> Thanks for ur quick response.  Most of the Infoobjects are common for both infocubes. I didn't understand this sentense "retrict the value with the infoprovider which values you are trying to view".
> Please explian elaborately how to restrict the values speicfic to infoprovider under rows.

Similar Messages

  • Workbook with changed query does not display the changes...

    Hi,
    I have a problem with a workbook with one query in - the query has been changed, but the new added keyfigures are not displayed in the existing WB.
    I know from Bex 3.5 there is the option on WB settings "return to global definitions" - I miss this functionality in BI 7.0.
    My installed sap gui is version 710
    Please let me know where I can switch on this feature...
    regards
    chris

    If you use "Return to Global Definition on refresh" option, all the users would have to have it turned on in their workbooks. In that case won't they lose any settings/navigation the user did, specific to their need. All the workbooks end up being the same in that case.
    We are still running on 30B and starting the upgrade to BI70. We just went through training on the new BEx analyzer, and I have to agree with you that some of the useful features of BEx 3X will be missed. Specially in the area of Workbook support, things like Copy query, insert query etc are missing as well.
    Thanks
    Vineet

  • How to do Grouping of Workbooks using XSL in Discoverer Viewer?

    Hello Discoverer Experts,
    My question is related to grouping of workbook names using XSL in Discoverer Viewer. This is a sample xml data file which contains 6 workbooks.
    <eul>
         <workbooks>
              <workbook>
                   <wb_name>Purchasing Workbook 1</wb_name>
                   <worksheets>
                        <worksheet>
                             <ws_name>A</ws_name>
                        </worksheet>
                        <worksheet>
                             <ws_name>B</ws_name>
                        </worksheet>
                   </worksheets>
              </workbook>
              <workbook>
                   <wb_name>Purchasing Workbook 2</wb_name>
                   <worksheets>
                        <worksheet>
                             <ws_name>C</ws_name>
                        </worksheet>
                        <worksheet>
                             <ws_name>D</ws_name>
                        </worksheet>
                   </worksheets>
              </workbook>
              <workbook>
                   <wb_name>Manufacturing Workbook 1</wb_name>
                   <worksheets>
                        <worksheet>
                             <ws_name>E</ws_name>
                        </worksheet>
                        <worksheet>
                             <ws_name>F</ws_name>
                        </worksheet>
                   </worksheets>
              </workbook>
              <workbook>
                   <wb_name>Manufacturing Workbook 2</wb_name>
                   <worksheets>
                        <worksheet>
                             <ws_name>G</ws_name>
                        </worksheet>
                        <worksheet>
                             <ws_name>H</ws_name>
                        </worksheet>
                   </worksheets>
              </workbook>
              <workbook>
                   <wb_name>CEO Workbook 1</wb_name>
                   <worksheets>
                        <worksheet>
                             <ws_name>I</ws_name>
                        </worksheet>
                        <worksheet>
                             <ws_name>J</ws_name>
                        </worksheet>
                   </worksheets>
              </workbook>
              <workbook>
                   <wb_name>CEO Workbook 2</wb_name>
                   <worksheets>
                        <worksheet>
                             <ws_name>K</ws_name>
                        </worksheet>
                        <worksheet>
                             <ws_name>L</ws_name>
                        </worksheet>
                   </worksheets>
              </workbook>
         </workbooks>
    </eul>
    The XSL is generating a List of Workbooks in <table> by using <xsl:for-each select="eul/workbooks/workbook">
    <table>
    <tr><td>Purchasing Workbook 1</td></tr>
    <tr><td>Purchasing Workbook 2</td></tr>
    <tr><td>Manufacturing Workbook 1</td></tr>
    <tr><td>Manufacturing Workbook 2</td></tr>
    <tr><td>CEO Workbook 1</td></tr>
    <tr><td>CEO Workbook 2</td></tr>
    </table>
    Now my question is:
    1. The client want to see this report in Groups i.e
    <table>
    <tr><th>Group Name: Purchasing</th></tr>
    <tr><td>Purchasing Workbook 1</td></tr>
    <tr><td>Purchasing Workbook 2</td></tr>
    </table>
    <table>
    <tr><th>Group Name: Manufacturing</th></tr>
    <tr><td>Manufacturing Workbook 1</td></tr>
    <tr><td>Manufacturing Workbook 2</td></tr>
    </table>
    <table>
    <tr><th>Group Name: CEO</th></tr>
    <tr><td>CEO Workbook 1</td></tr>
    <tr><td>CEO Workbook 2</td></tr>
    </table>
    How can I achieve this grouping using XSL ? Has anybody tried customizing the XSL file to achieve grouping of workbooks by name?
    Any help is highly appreciated.
    Thanks in advance.
    Warm Regards,
    Pranav Desai

    Hi Friends..
    This is not the reply.
    I have also some question..
    Some related topic I found on this.
    That's why I am posting the same question here also..
    Dear friends..
    I need help to customize our discoverer viewer.
    We are creating work sheets in arial font size 8.
    But, when it's viewing through discoverer viewer it's coming big size.
    If we saw the source code by right click, it's taking some style sheets where
    the font size is mentioned as 8. not 8px.
    How I can modify the work sheets in viewer.
    Exactly which tag I should modify for this.
    And the other thing is the heading section is coming something as
    jung.
    Like this...
    &nb12.09.52 PM 27-OCT-02; 27-OCT-02 &n12.09.52 PM12.09.52 PM
    From: 01-JAN-2002 To: 30-DEC-2002o Page :1 / 1
    How we will correct this ?
    Please reply me as the earliest.
    With Thanks & Regards,
    Sheeja
    [email protected]

  • Problem in creation of ARD using B1DE 1.5

    Hi Experts
    I have develop an AddOn using B1DE 1.5. It is working properly. Now I want to create ARD file of addon . I use 'SAP B1 AddOnInstaller.Net wizard to create ARD file. I follow all the setps of wizard. It finish without any error. But it does not create ARD file in Bin folder. What can be problem ? Please suggest me.
    Thanks
    Regards
    Jitender

    Jitender,
    You could manually create the ARD file by using the AddOnRegDataGen.exe.  If you search the SDK Help file for "Create a Registration Data File", you will find the documentation that tells you how to do this.
    With respect to B1DE ... if you actually go to the folder where you save your projects and open the installer project you created, as an example ...\Documents\Visual Studio 2008\Projects\B1AddOnInstallerNET1\B1AddOnInstallerNET1\B1AddOnInstallerNET1\
    ... in the ...\AddOnRegDataGenFile there should be an AddOnRegDataGen.bat file.  You can try to also manually execute this to see if the .ARD file gets created.  If it still does not it could be due to a pathing issue .bat file.  You may want to check that the paths are correct.
    Again ... worst case you can manually create the .ARD file as stated above.
    Eddy

  • Creation of Program using ABAP Query (SQ01)

    Hi All,
    I have a program called "AQL4FI==========INVOICE_CHECK=" in my 4.6 server but a similar program doesnot exist in ECC.
    From the name, it looks like a program created using SQ01.
    Can anyone please help as to how to create the same program in ECC using SQ01 by looking at the program in 4.6?
    Please help.
    Helpful answers will be fully rewarded.
    Thanks a ton.
    Naba

    First thing is this is not the way to convert the SAP Query to Report.
    First check that how many table in your query they have used.To check this if you go in SQ02 press display button left side you can see the tables.To check the fields selecting from tables check in field groups.
    In record processing check are there any conditions are there.
    Now wrire a select statement by joing all tables which you found above and in this select statement extract all fields which you found in field group into one internal table .Here you give the selection screen fields as condition fields in select statement.If you found any conditions in record processing event ,Loop that internal table and check the conditions or modifications.
    If you need more help let me know.
    Pls. reward points for helpful answers
    Thanks
    Murali Poli

  • Problem while creation of Routing using BAPI "BAPI_ROUTING_CREATE"

    Hi.
    I am trying to create routing using the BAPI "BAPI_ROUTING_CREATE", when I execute I get the group number and the group counter number in the Export parameters. But it is not saved in the database, when we look at CA03 using the group number system says routing not found.
    I am passing "Space" to Bapiflag and i am passing input to tables TASK, MATERIAL ALLOCATON and OPERATION as follows:-
    MATERIALTASKALLOCATION-MATERIAL
    MATERIALTASKALLOCATION-PLANT
    TASK-TASK_LIST_USAGE
    TASK-PLANT
    TASK-TASK_LIST_STATUS
    TASK-TASK_MEASURE_UNIT
    OPERATION-ACTIVITY
    OPERATION-CONTROL_KEY
    OPERATION-WORK_CNTR                    
    OPERATION-PLANT
    OPERATION-DESCRIPTION
    OPERATION-NUMERATOR
    OPERATION-DENOMENATOR
    OPERATION-BASE_QUANTITY
    OPERATION-STD_UNIT_01
    OPERATION-STD_VALUE_01
    OPERATION-STD_UNIT_02
    OPERATION-STD_VALUE_02
    OPERATION-STD_UNIT_03
    OPERATION-STD_VALUE_03
    OPERATION-STD_UNIT_04
    OPERATION-STD_VALUE_04
    OPERATION-STD_UNIT_05
    OPERATION-STD_VALUE_05
    OPERATION-STD_UNIT_06
    OPERATION-STD_VALUE_06
    Appreciate your replies.
    Regards.
    Anand Ghawade.

    Use BAPI_TRANSACTION_COMMIT after you call the BAPI_ROUTING_CREATE

  • Problem for creation of PO for different company code

    I have problem for creation of PO using ME21 for different company code.Order is not created.
    Please give reply it is urgent.

    Hi Mansih,
    I don´t understand what is your exact problem, as I don´t see any company code being specified. But maybe you should check in XK03 that the vendor master data is created for this company code/purchasing organisation!
    Have a nice day!

  • Query Selection View

    I'm using the Query Selection View web item on one of my web templates.  The issue is related to the Create and Delete command buttons not being displayed even though the Create/Delete - Display Button property has been selected for this control. 
    Thanks

    Did you ever figure this out?  I am having the same problem now

  • BEx Local View Changes

    Hi,
    We have a query where customers are displayed in the rows and monthwise pending invoices are displayed in columns. This report shows one year worth of data when executed. One end user of the report wanted both month and customer in the rows, with a summary for the year.
    Instead of changing the design of the query, we tried doing the same in Change Query -> Local Definition for that particular user. The problem arises here. We were allowed to move only the entire structure of key figures instead of one key figure at a time. Is this a property or how to solve this issue.
    Inputs regarding this are highly appreciated.

    Hi Bhanu,
    Thanks for your response.
    Well, in our scenario, we are interested in moving only the months Jan - Dec from columns to rows. Let the fields like number of pending invoices, invoice amounts stay in the columns area. How do we go about implementing this? If it is not possible in local view also, please give a solution.
    In the current design, there are twelve columns for each month and 3 more key figures related to invoices like % pending, % cleared, # pending etc. All these are listed under one structure. In the rows area, we have region and customer id.

  • Viewing pages in local view using IE

    Hi all, my problem is, i am using dreamweaver 8 and am having
    probs opening htm and html pages using IE from local view on my
    site, it keeps saying 'page cannot be displayed'. It was ok but
    then just stopped working. Any help or ideas what it could be will
    be much appreciated. Thanks

    Are you using Frames?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "jayney" <[email protected]> wrote in message
    news:esa53c$jft$[email protected]..
    > Hi all, my problem is, i am using dreamweaver 8 and am
    having probs
    > opening htm
    > and html pages using IE from local view on my site, it
    keeps saying 'page
    > cannot be displayed'. It was ok but then just stopped
    working. Any help
    > or
    > ideas what it could be will be much appreciated. Thanks
    >

  • Change query in Workbook

    Hi,
    I want to replace a query in a workbook via VBA. I already managed to replace the references of the query on the hidden sheet SAPBEXqueries. But when I refresh the new query, the textelement are not displayed correctly. Some are missing or   there are addional blank rows.
    Regards,
    Karen

    Hi Karen,
    I might know what you are facing.  When you write that you have replaced reference to the old query with reference to the new query in the hidden sheets ...
    Did you do anything other than replace the query's server ID in column B?  If not, then any of your structures that are not published as re-useable structures will be messed up.  Since you did not mention this as a problem, I am going to assume that you got this part right.
    So, then, if you got the part related to the repository worksheets completely correct, the remaining problem is getting the workbook Names right.  I am not referring to the file name, of course.  I am referring to what some people call "Named Ranges".  There are many of these, as you probably know. 
    The easiest way to visualize the names is to the use the sapbexDebugPrint API function.  If you can find that and use it (do a search on this Forum), it is a handy tool to have.  Otherwise, here is my own slightly different version of this.  Once you have visualized the Names, I think you will quickly see where you need to go.
    Sub listNames()
    Dim nm As Name, ws As Worksheet
    Dim wb As Workbook, wbNew As Workbook
        Set wb = ActiveWorkbook
        Set wbNew = Workbooks.Add
        n = 0
        With wbNew.Sheets(1)
        For Each nm In wb.Names
            On Error GoTo errorClear
            n = n + 1
            .Range("A" & n) = nm.Name
            .Range("B" & n) = nm.RefersToRange.Parent.Name
            .Range("C" & n) = nm.RefersToRange.Address
            .Range("D" & n) = "'" & nm.RefersTo
        Next nm
        .Columns("A:D").AutoFit
        End With
    errorClear:
        If Err.Number <> 0 Then
            Err.Clear
            Resume Next
        End If
    End Sub
    I did something like this (although my task was much simpler) when we migrated from an "old" template workbook to a new template workbook.  Since none of the Names needed to change, I could use the following code:
        'copy workbook named ranges
        Application.StatusBar = "Copying Query Ranges"
        For Each nm In wb1.Names
            wb2.Names.Add Name:=nm.Name, RefersTo:=nm.RefersTo
        Next nm
    In your case, the problem will be more difficult since technical names of some elements ... particularly Conditions ... will need to change.  But, I am certain that with the right cross-reference table you will be able to work this out.
    Hope this helps.
    - Pete

  • Problem in creation of sales order using BAPI

    Hi Guru's,
                  I am currently working on Minimum Order Value problem. If the ordered item is less than 5$, the requirement is to add a new material MOV to the existing order by filling the difference amount and making it to 5 pounds. I am using the bapi BAPI_SALESORDER_CHANGE to amend the existing order with the MOV material. The material is getting created successfully and the order is getting amended. When i tried to process the order for billing It shows incompletion log exist. On checking the incompletion log it shows "missing configuration". But when i go to the configuration of the material it shows green sign. <b>The most important thing is the material MOV has 2 configuration profile, I believe there is a confusion in selecting the configuration profile for creation of MOV </b>. I came to know about that problem because when i go to change mode (VA02) and try to check the configuration, It askes me to choose the configuration profile and when i choose the configuration profile incompletion log is cleared. When i save the order and send it to billing the billing happens successfully. Could any one help me on this issue.......
    Parameters passed to BAPI for configuration.
       st_order_cfgs_ref-posex = '900010'.            "PM14/06/07
      st_order_cfgs_ref-config_id = '000010'.       "PM14/06/07
      st_order_cfgs_ref-root_id = '10000010'.         "PM14/06/07
      append st_order_cfgs_ref to t_order_cfgs_ref.   "PM14/06/07
    st_order_cfgs_inst-config_id = '000010'.       "PM14/06/07
      st_order_cfgs_inst-inst_id = '10000010'.         "PM14/06/07
      append st_order_cfgs_inst to t_order_cfgs_inst.   "PM14/06/07
      st_order_cfgs_refinst-posex = '900010'.       "PM14/06/07
    st_order_cfgs_refinst-config_id = '000010'.       "PM14/06/07
      st_order_cfgs_refinst-inst_id = '10000010'.         "PM14/06/07
      append st_order_cfgs_refinst to t_order_cfgs_refinst.   "PM14/06/07
    Thanks in advance...
    Shiv

    Hi,
    Did u have a look at the standard programs which make use of BAPI_SALESORDER_CREATEFROMDAT1
    Heres a list...
    LWSSOU08                     
    MV45WF0S                     
    MWWMJF21_BAPI_SALESORDER_CREAT
    RBUS2032                    
    Regards,
    Tanveer.
    <b>Please mark helpful answers</b>

  • SQL query or view used internally by Discoverer Open Workbook from Database

    Hi Experts,
    I am involved in developing a web application wherein I have to display the 'All Workbooks' similiar functionality in the 'Open Workbook from Database' dialog box of Discoverer. Can anybody provide me with the background query or view that Discoverer uses to retrieve this data for workbook listing? Please let me know if my question is confusing and requires more details.
    Thanks
    Thomas

    Hi,
    If you just need the list of workbooks then you need to use the EUL_DOCUMENT table:
    SELECT u.User_Name          Owner_Name
    *,Doc.Doc_Name Workbook_Name*
    *,Doc.Doc_Updated_Date Last_Update_Date*
    FROM   Eul_Us.Eul5_Documents Doc
    *,Eul_Us.Eul5_Eul_Users Own_Usr*
    *,Fnd_User u*
    WHERE  Own_Usr.Eu_Id = Doc.Doc_Eu_Id AND
    To_Char(u.User_Id(+)) = Substr(Own_Usr.Eu_Username
    *,2*
    *,10);*
    If you want the exact same list then you need to do the above along with the sharing :
    SELECT DISTINCT
    case when instr(disco_docs.doc_created_by,'#')=0 then disco_docs.doc_created_by
    when instr(disco_docs.doc_created_by,'#')>0 and instr(disco_docs.doc_created_by,'#',2)=0 then (select fu.user_name from fnd_user fu where fu.user_id=substr(disco_docs.doc_created_by,2,5))
    else NULL
    end "Workbook Owner/Creator",
    disco_docs.doc_name "Workbook Name",
    disco_docs.Doc_Updated_Date  "Last Update Date",
    case when instr(disco_users.eu_username,'#')=0 then disco_users.eu_username
    when instr(disco_users.eu_username,'#')>0 and instr(disco_users.eu_username,'#',2)=0 then (select fu.user_name from fnd_user fu where fu.user_id=substr(disco_users.eu_username,2,5))
    else (select resp.responsibility_name from fnd_responsibility_tl resp where resp.responsibility_id=substr(disco_users.eu_username,2,5))
    end as "Shared Name / Responsibility"
    FROM
    eul_us.eul5_documents disco_docs,
    eul_us.eul5_access_privs disco_shares,
    eul_us.eul5_eul_users disco_users
    WHERE
    disco_docs.doc_id = disco_shares.gd_doc_id (+)
    and disco_users.eu_username(+) NOT IN ('EUL5', 'PUBLIC')
    AND disco_users.eu_id(+) = disco_shares.ap_eu_id;
    * Change the EUL_US to your discoverer schema...
    Then you will need to compare the current user with the sharing list or creator
    Good luck
    Tamir

  • How to change the reference of a Workbook to a Query

    I have a Query Q1 and I have a workbook W1 for this query in 3.5,  I copied query Q1 to a new Query Q2,  and copied workbook W1 to a new workbook W2. (using RSZC)
    Now I have Queries Q1 and Q2 and Workbooks W1 and W2. But as the workbook W2 is a copy of W1, it still has the reference to query Q1. Is there any way to change the reference of a workbook to a query ?
    My requirement is, workbook W2 should refer to query Q2.
    Appretiate your help.
    Regards,
    R. Vodnala

    Go to design mode of the second workbook and change the query using the edit option to Q2 then your workbook W2 will refer to query Q2
    Just to get the idea go through this link here it is shown how to change the query.
    https://wiki.sdn.sap.com/wiki/display/BI/Issue%20with%20Migrating%20BEx%20Query%20and%20Workbook

  • Sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loop

    sir i have given lot of effort but i am not able to solve my problem either with notifiers or with occurence fn,probably i do not know how to use these synchronisation tools.

    sir i am using datasocket read ,i am communicating with java but my problem is that bcz im using while loop to see if value has changed my labview consumes all the processors time ,sir i want a event like thing so that while loop is not in continuous loopHi Sam,
    I want to pass along a couple of tips that will get you more and better response on this list.
    1) There is an un-written rule that says more "stars" is better than just one star. Giving a one star rating will probably eliminate that responder from individuals that are willing to anser your question.
    2) If someone gives you an answer that meets your needs, reply to that answer and say that it worked.
    3) If someone suggests that you look at an example, DO IT! LV comes with a wonderful set of examples that demonstate almost all of the core functionality of LV. Familiarity with all of the LV examples will get you through about 80% of the Certified LabVIEW Developer exam.
    4) If you have a question first search the examples for something tha
    t may help you. If you can not find an example that is exactly what you want, find one that is close and post a question along the lines of "I want to do something similar to example X, how can I modify it to do Y".
    5) Some of the greatest LabVIEW minds offer there services and advice for free on this exchange. If you treat them good, they can get you through almost every challenge that can be encountered in LV.
    6) If English is not your native language, post your question in the language you favor. There is probably someone around that can help. "We're big, we're bad, we're international!"
    Trying to help,
    Welcome to the forum!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

Maybe you are looking for