Problems installing Audigy LS on Athlon 2000+ winXP home.

installing using driver file downloaded from Creative Website.
Biostar M7VIQ MB (I updated the Bios and chipset drivers)
Unistalled onboard Sound in bios..
The found new hardware wizard is present but the install will not complete...goes to blank blue screen
I have tried to install from Safe mode as well with no luck..
When running setup.exe I get the message that Audigy is not present....
I can use ctzapxx to uninstall and attempt to reinstall but no luck...
Can anyone help, please...

I can't offer resolution of the problem, but a couple of alternatives come to mind.
Obviously, this one computer has something in it that is causing the problem. It's probably an interaction involving Windows and the hardware. Windows SP2 may be a solution; install it when available, and try again.
The SDK installation in C:\j2sdk1.4.2_0x does not involve any Registry entries - they're for the public JRE installed in Program Files. You can copy the j2sdk1.4.2_0x directory from another machine, avoiding the install; you just won't have the public JRE. Copy java.exe and javaw.exe to System32 to allow naked java/javaw commands to work.

Similar Messages

Problem Installing Oracle 10g on Windows 2000

Hi all,
I´m trying to install the Oracle 10.2.0.1 on Windows 2000 Terminal, but
I´m getting the following error:
java.util.zip.ZipException: oversubscribed literal/length tree
     at java.util.zip.InflaterInputStream.read(Unknown Source)
     at java.util.zip.ZipInputStream.read(Unknown Source)
     at java.io.FilterInputStream.read(Unknown Source)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyFileFromJar(OiijFastJarExtracter.java:258)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.copyJarContents(OiijFastJarExtracter.java:194)
     at oracle.sysman.oii.oiij.OiijFastJarExtracter.extract(OiijFastJarExtracter.java:143)
     at oracle.sysman.oii.oiij.OiijJarExtractQueue$OiijJarExtractWorker.run(OiijJarExtractQueue.java:341)Somebody know about this?
A important information: Other person have tried to install the Oracle9i, but he've cancelled the operation.
So, I've cleared Oracle information from regedit, but the key LEGACY_ORACLEMTSRECOVERYSERVICE
I cannot make clear. I don't know if this can influence in installation
thanks!!!!

Hi all,
Thank u for help me. Very good, but now I got other error :-(
Error file:
java.util.zip.ZipException: invalid entry CRC (expected 0x6d8a0210 but got 0x6cc88669)
     at java.util.zip.ZipInputStream.readEnd(Unknown Source)
     at java.util.zip.ZipInputStream.read(Unknown Source)
     at java.io.FilterInputStream.read(Unknown Source)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1421)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1387)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1278)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1237)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1192)
     at oracle.sysman.oii.oiix.OiixFileOps.copyStreamFromJar(OiixFileOps.java:1123)
Log file:
INFO: Exception thrown from action: copyGroupFromJar
Exception Name: IOException2
Exception String: Error in writing to file 'C:\oracle\product\10.2.0\db_1\jlib\oemlt-10_1_0.jar'. [invalid entry CRC (expected 0x6d8a0210 but got 0x6cc88669)]
Exception Severity: 2I'm looking for this error, I found several solutions, but :-(
thank u so much again!!!!
[]s

Installing Adobe Photoshop CS5 in Windows 7 Home Premium 64bit

Hi,
Just wanted to know if there are any problems installing Adobe Photoshop CS5 in Windows 7 Home Premium 64-bit?
Planning to purchase a laptop that comes with the OEM license and plan to use 64-bit OS to maximize the 8GB RAM of memory. Just afraid if there are known issues for this type of installations.
Thanks

No issues.
On the contrary, subject to the image(s) being edited, Photoshop will thrive in a 64 bit Win 7 machine given the right tweaks.
http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html
Be aware that two versions of Photoshop will be installed 32 bit and 64 bit. The 32 bit is there for legacy reasons with some plugins e.g. TWAIN scanner
http://helpx.adobe.com/photoshop/kb/64-bit-os-benefits-limitations.html#main_Opening_32_bi t_and_64_bit_versions_on_Windows

K7T - Turbo2 and Athlon 2000+ problem

Sorry for my english...
K7T Turbo2 - BIOS 3.6. Problem with Athlon 2000+. I can´t set the multilplier to 12.5, because there is only 12 - 13 step. When i set it to "Default" POST show CPU correctly as Athlon 2000+, but pc can´t be rebooted by ctrl+alt+del. Must be switched off and then on...
Second thing is... it´s impossible to install win98 or xp - blue death.
With Duron 1.3 it´s working fine ...

Hi,
I don't think ECC memory is supported by the Turbo2, it states "NO support ECC Function" on the MSI info page, look here
So, I'm not sure that ECC bios function will help you, or what it is really there for.
But, I guess this opinion will not explain why you said it will work with an duron 1.3
Another thing is that the XP2000 uses more power than the duron 1.3, so your PSU sounds a bit weak for the XP2000 cpu;
PSU 300W
5V - 24A
12V - 10A
3.3V - 14A

Problem Installing 817 on Windows 2000 with RAID Array

I am having a problem installing Oracle under windows 2000 which has 2 x 60 GB discs configured in RAID array. When I run the setup program the cursor goes busy for about 10 seconds and returns back to normal and nothing happens !. No errors nothing.
However when I run the Object Manager in the ods_preinstall directory it starts but in the log file I get the following error message:-
02/14/02 09:46:18 : (892) : Error in IO Control call for disk PhysicalDrive0 (Error 21)
02/14/02 09:46:19 : (892) : The count = 28
02/14/02 09:46:19 : (892) : The signature is 0x443aa035
02/14/02 09:46:19 : (892) : Error: First Partition of the disk must be an extended disk
02/14/02 09:46:19 : (892) : Found the partition: 7
Any idea whats happening....? Has anyone seen this before. Do I need to do something special in teh RAID..?
TIA
Martin

Here are some possible solutions:
1. The installation notes state that you must be logged on as Administrator to be able to install 9i. Are you logged on as the Administrator? Being logged on as user01 with Administrator priviledges isn't the same as Administrator.
2. Is the disk full? If I remember my installation correctly, I needed 3 times the size of the files. The documentation will tell you how much space you need.
Hope these two questions help
Regards,
Michael

Problem in installing Forms 6 on Windows 2000

I have problem in installing forms 6 on windows 2000.
Please advise me.
null

Hello,
I've been using Dev 2000 ver 6i for several months sucessfully on Win 2K RC2. The compiled .fmx's work fine with the ver 6.0 runtime environment under NT 4.0.
The only problem is that the Forms Server won't work till the 1st patch set comes out
(only Oracle knows when!) , so you can't test or deploy the forms as web apps on Win 2K yet. OAS 4.0 appears to work ok on Win 2K.
I have been using the Beta version of Dev 6i and will upgrade to the release version eventually, probably when the patch comes out.
null

Problem Installing OAS 10g Infrastructure on WinXP

When installing OAS 10g Infrastructure on my WinXP Laptop the OPMN configuration assistant fails while starting the apache http server, because apache.exe fails (apache.exe has encountered a problem and needs to close...). Starting the apache http server using 'dcmctl start -ct ohs' results in the same behaviour. This is reproduceable. I know that this kind of installation in not supported. Any idea what the reason could be for this ?
Thanks Thomas

When installing OAS 10g Infrastructure on my WinXP Laptop the OPMN configuration assistant fails while starting the apache http server, because apache.exe fails (apache.exe has encountered a problem and needs to close...). Starting the apache http server using 'dcmctl start -ct ohs' results in the same behaviour. This is reproduceable. I know that this kind of installation in not supported. Any idea what the reason could be for this ?
Thanks Thomas

Problem installing Oracle 9i database entreprise edition on win 2000 server

Hi,
I am trying to install the oracle 9i database 2.0(release2) on Win 2000 server and get this error message.
"Couldn't connect to the server - Please check the network and that server daemons are running. (Socket error 10061).
Could somebody help...........
Thanks in advance.
Maya

hi,
try to install service pack for windows 2000 and try.

Problem installing drivers for on-board Realtek sound

Using Neo2
I keep getting the following error when Windows XP tries to install the driver:
"Cannot Install this Hardware
There was a problem installing this hardware:
Realtek AC'97 Audio
An error occurred during the installation of this device
The data is invalid"
I've tried all the usual stuff of ensuring that the software is installed prior to the PnP wizard. I've even tried installing the NT4 (non-PnP) drivers (which installed ok and appeared to work, except that the sound device wasn't recognised).
I've tried the latest patch to no avail. Is my H/W knackered?
Any input gratefully received.
Cheers,
/D

Ahem,
I thought what I had specified was relevant to the query, but here goes:
-Motherboard type and model - MSI K8N Neo2 Platinum (939)
-Bios type and revision (AMI rev 1.9) - Phoenix - AwardBIOS v6.00PG Version : Nvidia - 42302e31
-CPU type and model - AMD Athlon(tm) 64 Processor 3000+ (939)
-Memory name, model and quantity - not sure but 3200, 2x512Mb Generic. Seems stable
-Video card name and model plus drivers and version - Hercules 3D Prophet 9600/9600Pro Series (SE) Driver Version : 5.2.3790.2
-Power Supply name, model and the amp rating for the +3.3V, +5V and +12V lines plus any limitation on the +3.3/+5V combined watts. This information can be found on a sticker on the side of the supply. - sorry but I haven't got the time to open the case up. It's a decent 400W jobbie. I've previously checked the various voltages and they seem OK.
-Hard Drives: Manufacturer, type and size and which IDE or SATA ports they are located on WDC WD800JB-00ETA0 (Sata 6) MAXTOR 6L040J2 IDE 1 (master)
-Optical Drives: Manufacturer and type and which IDE ports they are located on CDROMLITE-ON_LTR-48125S______________________1S05____\5&1DE79660&0&0.0.0 on 2nd Ide master
-Operating system and service pack level - WinXP SP1 and hotfixes.

Windows 7 freezes after installing Audigy 2

Hi
I cannot install my Audigy 2 soundcard with Windows 7.
It is a clean install of windows 7 64 bit on a new HDD. However, after installation and driver file updates after I reboot, Windows 7 just freezes.
?I have tried different drivers but the same problem arises. I have tried to load? SBAX_PCDRV_LB_2_8_00 as well as SBAX_PCDRVBETA2 US_2_8_00, along with the automatic updates Windows 7. Any help to rectify this situation would be?greatly appreciated.
Many thanks?

Re: Windows 7 freezes after installing Audigy 2?
Thanks for your response Freddie. I just do not know how people can expect companies to keep upgrading and writing software for hardware that is YEARS old. Years old.......People (not you) clamor for Windows 7 drivers for devices made for XP, and my god, that operating system came out a long long time ago. Moving on is not just an alternati've, it is a necessity. I would never be using a Gravis sound card from 995 7 or 8 (which sounded really good back then) on Windows 7 and be frustrated as to why Gravis does not have a full suite of Windows 7 drivers. It would be nice, but it is not feasible or reasonable to expect. Creative would literally spend all of their profits writing drivers and applications for stuff that is no longer sold or worth supporting. Microsoft has even changed the sound model of Windows from scratch which means drivers have to be rewritten from the ground up, not just "slightly modified".
I bought an HP scanner for Windows 98. Great scanner. Loved it. Windows Millenium came out, and that scanner never never worked. Not their fault really, the box it came in said, "Made for Windows 98, 98SE" not "just might be compatible for Windows ME, and whatever else Microsoft may invent."? Well what happened? HP wrote drivers and applications for that scanner for Windows ME and 2000, and that disc cost me $40........Seriously? Yes. Did I buy it? Yes.... I am astonished they are writing drivers for the Audigy's now. But I do hope you find a Windows 7 sound card, and if so, I am curious if you like it. I use my X-Fi Titanium for ) games and 2) movies. and 3) music. It works well, but I had to research which boards it works with.
Currently Asus is quite the competitor these days, and I see they have Windows 7 drivers out. A few months ago, those drivers wreaked havoc and a lot of people's systems.

Problem updating Audigy 2 NX driv

I have a Dell 8600 notebook with an Audigy 2 NX. I have no problem installing and running the device when using the original driver from the disc, however when I try to update to the newer drivers I get nothing but crackling and screaching noises.
I have had this problem for a while now, support were of no help to me so I decided that i would li've with it for a while. I have just reinstalled my system and thought I would try the new drivers again but again I have the same problem. I can li've with original driver but I think this means that the device is only connected as a USB . device, is this right? If anyone can help me with this I would be very greatful as it is starting to annoy me now.

This is just a thought but it may be possible if you use 3rd part drivers for your 2nd card.
So, try these drivers for NX and use original (Creative bundled) drivers for MP3+.
NOTE: I have never had USB cards, so I have not tested if USB-ASIO driver shows as another driver on your driver list(s). It's also seems to be compatible with both of your cards.
.jtp

Problems Installing Oracle 8i on Gateway laptop W/ 1.6 GHz CPU

I'm having problems installing Oracle 8i on a Gateway 600X with a 1.6 GHz CPU and Windows 2000 Professional. The Install/DeInstall screen appears, I click Install/Deinstall, the screen disappears, the hourglass disappears a couple seconds later, and the the install ends without any messages. I tried installing on slower machines and the software seems to install correctly. Is there an issue with Intel's new Mobile Pentium 4 processors or Gateway's laptops?
Thanks,
Mike

have a look in your $ORACLE_HOME/dbs directory. If the init<ORACLE_SID>.ora file has remote_login_password=exclusive then you should also have a file called orapw<ORACLE_SID>. If you haven't, then create one by running "orapwd file=orapw<ORACLE_SID> password=internal entries=5".
This has worked for me in the past, hope it helps.
Stef

Problems installing Web Controls 2.1 on 6.1 portal

After problems upgrading from 5.04 to 6.1, we decided to build a 6.1 portal environment from scratch. I've run into problems installing the 2.1 web controls. Running the exe does nothing (the installer doesnt even launch). After a few attempts, I looked in the registry and found dr. watson errors indicating an acces violation. I tried running under compatibility modes for xp and 2000. Same error.
We are running w2k3 sp2 servers with portal 6.1.
Is it possible to manually install 2.1 wc from a server that already has it? Any other solutions?
Any help would be EXTREMELY appriciated.

Are you running the installer directly on the machine to be installed on? In case No then try that out. Also what is the edition of win2k3?

Installing Oracle 8i on WIndows 2000

I have installed Oracle 8i on WIndows 2000, and I want it
configured to work locally on one machine. I get it installed
with no problem with the seeded database. When I try to log
into SQL*Plus as anything, i.e. SYSTEM/MANAGER or SCOTT/TIGER or
SYS/CHANGE_ON_INSTALL, it tries to connect through my modem. Is
there a way to configure the tnsnames.ora so it doesn't try to
go through a network?
Sincerely
rk

You probably have to navigate to inside the INSTALL folder. Sometimes the SETUP.EXEs on the root of the CD won't launch. Should be something like INSTALL\WIN32\setup.exe

Problems installing CS5.5 ~ Really need help.. Thank you.

Operating system = WinXP
Trying to install purchased CS5.5 Web Premium on completely clean machine recently reformatted.
Installing from files downloaded from Adobe.
I did a successful install of this last summer, but this time it's been a real pain.
I am completely lost on what is wrong and I have customers waiting for web page fixes.
1. I bought the CS5.5 Web Premium upgrade last summer. I had 4.0 on my system at the time. No problem installing 5.5.
2. Yesterday I wiped my hard drive clean and now need to reinstall CS5.5. I do not have CS4.0 on my machine now.
3. I downloaded my CS5.5 files from Adobe today.
4. The installation instructions said:
"Navigate to the directory containing the downloaded files.... Double-click the Set-up.exe file to begin the installation. In some cases, the Set-up.exe file may open
automatically."
Today, that magic did NOT happen. Nor had it happened last summer.
So I tried to install the files anyhow.
5. On my previous install I opened files individually when the magic didn't happen and it still went okay. But not today.
Today I started with WebPremium_DesignPremium_CS5_5_Content_ALL.exe file. Can someone tell me if opening that file first was a mistake? And if so, what file should I have opened first?
It opened but I can see nothing in my program files. So I tried the three other files with no success... Here are the error messages:
WebPremium_DesignPremium_CS5_5_Content_ALL.exe - - - Which I already opened. No files can be found on my computer, but they must be there.
WebPremium_CS5_5_LS1.exe - - - I get an error message that says it is not a valid Win32 application.
Illustrator_15_1_Content_LS1.exe - - - This acts like it will open and download fine. I did not do it pending why the other files aren't working.
WebPremium_CS5_5_LS1.7z - - - I try to open this and get an error message, "Windows cannot open the file..." and it wants to find it on the Internet.
This worked fine last summer. Can someone help me? Do I need to reformat my whole computer again?
You don't know how appreciated the answer would be. I would be most grateful. Thanks!!!
BLee

WebPremium_DesignPremium_CS5_5_Content_ALL.exe - - - Which I already opened. No files can be found on my computer, but they must be there.
Probably not. That really is just the additional content and without a qualifying product install it won't do anything most likely since the directories it expects do not yet exist.
WebPremium_CS5_5_LS1.exe - - - I get an error message that says it is not a valid Win32 application.
Could be damaged, could be blocked. Anything from virus scanners to flakey drives. Could also be missing a critical system library. No way to tell from afar.
WebPremium_CS5_5_LS1.7z - - - I try to open this and get an error message, "Windows cannot open the file..." and it wants to find it on the Internet.
7zip, WinZip, WinRar
Mylenium

Problems installing Audigy LS on Athlon 2000+ winXP home.

Similar Messages

Maybe you are looking for