Problems moving distribution from one environment toanother

Hi all,
Problems moving distribution from one environment to another
Initially we have the environment as below:-
Production :-
Server1 : AIX Environment manager (dealing with conductor, web, db)
Server2 : NT Node manager (dealing with outlook)
Development :-
Server3 : NT Environment manager (dealing with conductor, web, db)
Server4 : NT Node manager (dealing with outlook)
Currently, we intended to change the production environment via
changing the Server1 to Server3, as the new environment
manager, while the node manager unchanged.
Things that we've done in Server2, the node manager for
production environment:-
1) Pointing to Server3 instead of Server1, by changing Forte
Control Panel and changing registry entry.
2) Re-deploy the needed libraries in the new environment, so
that it can has the updated version.
3) Re-olegen the vb component.
4) Re-deploy the whole application.
However, we're facing the following problems/error messages
for the newly deployed Forte application:
1) Failed to bind to object named (/wfuseraccessobj/odbso/1)
2) Failed to bind to object named (/wfuseraccessobj/emailso/1)
These errors are actually refer to the libraries that used by
Conductor in order to perform database retrieval, and emailing
functions. These functions were worked properly in the initial
environments.
NOTE: The first error could be okay when refreshing the internet browser
(as our system is a web-based system), somehow it keeps on occurring every
now and then.
Please advice on this matter and reply ASAP as the project
delivery is crucial for our side.
Errors:
ERROR 1:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: creating engine object
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: engine object created
23-Nov-1999 17:38:32: EngineShell.SetEngine: Unit1: attaching database
service
23-Nov-1999 17:38:33: EngineShell.SetEngine: Unit1: connected to database
23-Nov-1999 17:38:33: EngineShell.SetEngine: Cold-starting engine... 0
23-Nov-1999 17:38:35: EngineShell.SetEngine: Unit1: registering shell
anchor
23-Nov-1999 17:41:31: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:33: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:41:34: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:54: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
23-Nov-1999 17:42:56: Build: Exception raised of type ProtectionException
and severity 3: An user exception caught in ValidateUser().
ERROR 2:
registering agent anchor /WorkFlow/centrale/lmseng/Agents/EngineUnit_Unit1
Attached to manager for node CHARON.
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: changing engine state
to
ONLINE
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: trying to remove old
shell anchor
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: creating engine object
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: engine object created
13-Oct-1999 16:45:40: EngineShell.SetEngine: Unit1: attaching database
service
13-Oct-1999 16:45:43: EngineShell.SetEngine: Unit1: connected to database
13-Oct-1999 16:45:43: EngineShell.SetEngine: Cold-starting engine... 0
13-Oct-1999 16:45:47: EngineShell.SetEngine: Unit1: registering shell
anchor
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: A TOOL execution exception caught in ReadyAction().
13-Oct-1999 16:49:58: Build: Exception raised of type ActivityException and
severity 3: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
SYSTEM ERROR: Exception in activity TempReview (4) will cause an abort of
process LMSPD (10).
Class: ErrorException
Error #: [2, 122]
Detected at: OfferedActivity.Activity.AbortProcessInException()
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: A TOOL execution exception caught in ReadyAction().
Class: ErrorException
Error #: [2, 107]
Detected at: OfferedActivity.ReadyAction
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
SYSTEM ERROR: The attribute firstReviewerID is not available in this
accessor.
Class: qqsp_UsageException with ReasonCode: SP_ER_PARAMETERERROR
Error #: [15, 1206]
Detected at: AttributeAccessor.AttributeAccessor.Find()
Last TOOL statement: method TempReview.OnReady
Error Time: Wed Oct 13 16:49:58
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
Begin Stack Backtrace
==========================================================
Trace caused by a segmentation or access violation in the Forte executable:
Application: WFEngineUnit_cl1
Platform: PC / NT
Partition: WFEngineUnit_cl1_Part1
Generated: 02-Jun-1998 19:10:20
By: ftexec Version 3.0.G.2
Fault at 13-Oct-1999 16:49:58, pid '2441', node 'CHARON':
User Name: SYSTEM
Machine Name: CHARON with 2 CPU(s)
OS version 4.0
Loading symbols for ...
d:\forte\install\bin\QQCT.dll
d:\forte\install\bin\QQSH.dll
d:\forte\userapp\wfengine\cl1\wfengi1.exe
d:\forte\install\bin\QQKN.dll
d:\forte\install\bin\QQSM.dll
d:\forte\install\bin\QQDO.dll
d:\forte\install\bin\QQCM.dll
d:\forte\install\bin\QQRT.dll
d:\forte\userapp\ofcustom\cl0\libofcus.dll
d:\forte\install\bin\QQHD.dll
d:\forte\install\bin\QQDB.dll
d:\forte\install\bin\QQDS.dll
d:\forte\install\bin\QQDD.dll
d:\forte\userapp\wfcustom\cl0\libwfcus.dll
d:\forte\userapp\wfenvdef\cl1\libwfenv.dll
d:\forte\install\bin\QQEM.dll
d:\forte\install\bin\QQFO.dll
d:\forte\install\bin\qqtlnt.dll
d:\forte\install\bin\w3tpwss.dll
C:\WINNT\System32\rpcltc1.dll
C:\WINNT\System32\comctl32.ocx
d:\forte\install\bin\QQRP.dll
C:\WINNT\System32\OLEPRO32.DLL
C:\WINNT\System32\WINSPOOL.DRV
C:\WINNT\System32\MFC40.DLL
C:\WINNT\system32\OLEAUT32.dll
C:\WINNT\System32\rnr20.dll
C:\WINNT\System32\IMM32.dll
C:\WINNT\system32\msafd.dll
C:\WINNT\System32\wshtcpip.dll
C:\WINNT\System32\WS2HELP.dll
C:\WINNT\System32\WS2_32.dll
C:\WINNT\System32\WSOCK32.dll
C:\WINNT\System32\MSVCRT40.dll
C:\WINNT\system32\COMCTL32.dll
C:\WINNT\system32\ole32.dll
C:\WINNT\system32\SHELL32.dll
C:\WINNT\system32\comdlg32.dll
C:\WINNT\system32\ADVAPI32.dll
C:\WINNT\system32\RPCRT4.dll
C:\WINNT\system32\USER32.dll
C:\WINNT\system32\GDI32.dll
C:\WINNT\system32\KERNEL32.dll
C:\WINNT\System32\ntdll.dll
C:\WINNT\system32\MSVCRT.dll
C:\WINNT\System32\MSVCIRT.dll
Stack backtrace ...
wfengi1 004edd89 (017bb4f0,019e85e0,046bfe34,016a0c08)
wfengi1 004e29d1 (017bb4f0,019f1fc0,00000000,00f039d0)
wfengi1 004e2ecb (017bb4f0,00000024,019e85e0,019f1f98)
wfengi1 004e4503 (017bb4f0,019e85e0,01a20025,01a22868)
QQKN 005dc66f (017bb4f0,019e85e0,019f0025,01a22848)
QQKN 005df7a5 (017bb4f0,019e85e0,01a22890,01a22848)
QQKN 00697109 (017bb4f0,00000000,00f039d0,00f039d0)
QQSH 0027c47b (017bb4f0,0161b9d8,00000000,017bb4f0)
QQKN 0067f24f (01619c14,017bb4f0,f34a8eb8,046bffb8)
QQKN 0067e2d5 (01619c14,00000000,00000000,00f039d0)
MSVCRT 780099ed (00f039d0,00000000,00000000,00f039d0)
KERNEL32 77f04f2c (78009990,00f039d0,00000000,00905a4d)
QQCT 00000000 (00000000,00000000,00000000,00000000)
End of Stack Backtrace
=========================================================
13-Oct-1999 16:50:10: Build: Exception raised of type TimerException and
severity 3: Exception in timer OneWorkingDayTimer (3) will cause an abort
of
process LMSPD (10).
SYSTEM ERROR: Exception in timer OneWorkingDayTimer (3) will cause an abort
of process LMSPD (10).
Class: ErrorException
Error #: [8, 111]
Detected at: ElapsedTimer.PTimer.FinishExpiration()
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
INFORMATION: Stack Trace for Exception:
No 4gl Traceback
Class: qqsp_ErrorDescriptor
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: qqlo_LomTaskInitiator::Run: Asynchronous task exiting:
The following error was not on the error stack:
FATAL ERROR: System segmentation/access violation caught.
Class: qqos_SystemException
Error #: [101, 321]
Detected at: qqos_MainExFilter at 1
Error Time: Wed Oct 13 16:50:10
Exception occurred (locally) on partition "WFEngineUnit_cl1_Part1",
(partitionId = E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913, taskId =
[E3C2D7C0-5934-11D3-A63F-EB531FA4AA77:0x913.138]) in application
"WFEngineUnit_cl1", pid 2441 on node CHARON in environment centrale.
ERROR: TMgr.Terminate: fatal error terminated partition

Lori,
Yes. I organize all my film rolls by name. If I import new pictures that don't fit into an existing film roll name I create a new film roll with a name appropriate to the theme of the new pictures. No problem with this.
However, if I import pictures at a later date that I want to move to an existing film roll, there is a problem if scrolling is required to bring the existing film roll into view in the display pane.
For example, I have a film roll called "Flowers & Plants". I later import a roll that contains some pictures that I want to move to the Flowers & Plants roll. The Flowers & Plants roll is not visible in the display pane so scrolling is necessary. I select and drag the new pictures up (the new film roll is always at the bottom of the display pane) to reveal the Flowers & Plants film roll. However, the film rolls scroll by so fast it is virtually impossible to stop on the Flowers & Plants roll's title bar.
This was not a problem with earlier versions of iPhoto on slower Macs. I really appreciate the much improved iPhoto/Mac performance but I wish there were some way to control this aspect.
I hope this helps.
Thanks.
Mike

Similar Messages

Problem moving mail from one computer to another...

Hello.
I'm trying to move a specific mailbox from one computer to another computer. I'm doing this to 2 pairs of machines and with the first pair I had no issues. But, then second pair I get errors.
On the first computer I just copied the .mbox folder (which contains the sub "Messages" folder & info.plist file) from the one computer to the other. Then, in mail.app I "import" the messages via the Import option (importing mail from Mac OS X). No problem and all messages are imported.
On the second pair of computers, I did the same thing, but when I try and Import the messages onto the second machine, it says it can't find any OS X mail messages to import.
I really need to get these messages from one machine to another. "Forwarding" or "Redirecting" all the messages from one machine to another isn't an option.
Can anyone suggest what might be wrong, or another way of migrating the single folder of messages (not the entire account) from one machine to another?
Thanks,
Kristin.

Hi Kristin,
I stay away from mbox files because it has never worked for me, but I may have a solution. This may not be THE award winning answer, but you could consider it when the other options don't work:
I assume you want to import a mailbox that is NOT part of an IMAP account, because otherwise you would not have this problem (right?) (otherwise just open that IMAP account on the computer you want the messages on).
But if you have an IMAP account, besides the POP account that contains the mailbox in question, you can use that account to fix your problem:
Go to the compu that has the desired mailbox, make a new folder in the IMAP account called 'backup' or whatever. Copy all messages from the desired mailbox to that new IMAP folder (depending on size this may take a while, because you are uploading via your internet connection). Now go to the other compu, make a new 'local folder' in mail.app. Open the IMAP account in mail.app and open the 'back up folder'. Now copy all messages to the new, local folder.
If you don't have an IMAP account, you can always open a free one with gmail.
I know, it's not very elegant, but this will work guaranteed.
Good luck,
Feddeg

Problem moving photos from one comp to another in LR 4

I am having a problem with moving my photos from a MacBook Pro to a PC laptop. All the files reside in one directory on an external drive. I copied the catalog from the Mac to the PC, connected the drive, started LR and pointed to the copied catalog. As expected, LR did not know where the files from the external drive were, so I highlighted the drive, right clicked the photo directory and told it to find missing files. I then pointed it to the proper directory on the drive. It only partially worked. Several of the subdirectories on the drive did not relink. If I take the drive off the PC and put it back on the Mac, the subdirectories are properly linked, where on the PC, some aren't.
I can reimport, but then I have to do edits all over again on those photos. Does anyone have any ideas?
Thanks!

Are you sure that in the Mac to PC conversion of the actual folders, that perhaps some of the names folder didn't change?
Can you compare the exact name of one of these folders on both computers?
What happens if you try to right-click on the problem folders in Lightroom and select Find Missing Folder and then point just that specific folder in Lightroom to the proper folder on your PC?

Problem Moving Project from One Machine to Another

Hi.
I teach in the school of communication at a university. Tonight, I tried to share a FCP project with my students in a lab setting. I wanted them to continue to edit what I had started.
I gave each of them the FCP project folder on a thumb drive. They downloaded the folder to their desktop.
When they launched the project they got the "Media Offline" window. There is only one file, a WAV file, in the project, so it was easy to find and reconnect.
The problem was that each of them got an error message about the "Media Start and End."
I had cut the single WAV file into a much shorter edit, and all those edits went all screwy, I believe due to this error. For instance, the WAV file is an interview, and I'd cut out the interviewer's questions, leaving only the subject's replies. But when my students opened the project, the edits I'd made included the interviewer's questions, left out some of the subject's answers, etc.
I'd really appreciate any input on what I need to do in order for a project to open on a student's computer exactly as I have saved it on my computer(s).
Thanks very much.

Go back to your original project file. Give the original media a *Reel Name*.
Use Media Manager (in the File menu bar item) to consolidate a linked copy of the media and its project file to a folder of your choosing.
Detailed information on using Media Manager can be found in the FCP User Manual.

Moving a template or input schedule from one environment to another in MS

Hi team,
Can anyone let me know how does any template or input schedule is moved from one environment to another in MS version?
Please give me steps.. Appreciate your great help....
Thanks,
Chandrakanth.K

Hi Chandrakanth,
if you want only the template the easiest is just copy the xlt file from the same folder from one server to the other.
If you want to copy all the environment (even data) you can use backup and restore from the server manager (appset\server backup save the zip file on the destination environment and restore it).
From the BPC MS 7.5 SP06 and 10.0 SP01 even the SAP Enhanced Change and Transport System (CTS+) is enabled, for this please see http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/25924
Kind regards
Roberto

Moving images from one library to another; or how to have 2 libraries open at the same time in Aperture 2

This may be something easy but for some reason I am having a hard time figuring this out. Basically this is the situation: I have a library on my MBP hd that I import pictures to when I am not hooked up to my external hd for the time being. The main library is of course on the external 2tb drive. How do I have 2 libraries open so that I can essentially drag and drop the pictures from one library to another? It would basically be like moving files from one project to another. Thanks for any help!

Always keep a backup of your original images, before you delete them. I make a backup right form the card, before I even import them to Aperture.
How are your images stored right now? Are the referenced or managed? On your big volume I'd consolidate the newly imported images, to be sure they are really inside the Aperture library before I delete any images outside the library.
but they have the little yellow triangle caution symbol on them and I can see them but not really edit them
That is a very typical problem, when you imported your images as referenced images then somehow delete or move the original master image files, that are stored outside the Aperture library.
Do you still have the original masters of the images with the yellow triangle that you cannot edit? In Aperture 3 you can point Aperture to the location of the master image file "File >Locate referenced image" - probably Aperture 2 has a similar command to let you reconnect your masters, if you still have them. Look into the manual.

I am having a problem moving files from a iMac in location mac in another location. I have tried using Dropbox and the Public folder in the i disc. When I drag the files into dropbox they become alias' and I can't open them at the other end beca

I am having a problem moving files from an imac in one location to an imac inanother location. I have tried using Dropbox which is installed in both locations but when i drad a file ino yhe app it becomes an alias. When I get to the other location it says I can't open the file because the " original application that created it is not present". This is despite the fact that the app that created both files is installed in both computers. If I use the Public folder in the idisc, when I get to the other location the file isn't there. Am I forgetting to turn something on or off? Should I manually sync the Public folder and if so how? Thanks
Message was edited by: stephenfromdelray beach

So now that's two of us. Hopefully, someone has an answer.

Moving Stack from one folder to another?

Is there a way to keep a stack together while moving it from one folder to another. When I grab the stack and drop it to a folder, I view the folder and the images are no longer in a stack. It would save me a lot of time if they would stay stacked. Am I missing something?
Thank you.

Well your code is unreadable because you didn't post it properly, but I'd guess you've fallen into the old multiple-delete trap in a new way. It's like this:
To start with you have messages numbered 0, 1, and 2, let's say. So you write a loop that lets i run from 0 to 2 and delete message number i in the loop. What really happens? The first time through the loop you delete message number 0, after which you are left with messages numbered 0 and 1. The second time through the loop you delete message number 1, after which you are left with message 0 only. The third time through the loop you delete message 2, which isn't there and you get that message.
That's just a guess, I didn't have the patience to read that ugly unformatted code. There are two ways to do the multiple delete properly, if that's actually your problem: (1) run the loop upwards from 0 and always delete message 0; (2) run the loop downwards from N-1 to 0 and delete message i.

Moving Itunes From one computer to another

HI,
Can anyone offer advice for moving Itunes from one laptop to another? The original laptop that has my itunes on it, has broke, it froze and will not operate. Rather that lose all my purchased music and playlists i would like to swap it to another laptop. Can anyone advise if this will be possible and how to do it? Both laptops have windows XP installed
thanks
Arlene

Hi
I am having a similar problem- when I record from Itunes to a cd it only works in "Data cd" format in the advanced tab. That's okay, but when I re-insert the cd and try to import it, it doesn't show anything- it plays in Itunes okay. There aren't any little boxes to check for selecting any songs and if I try to use the import function, it shows as blank.(file type shows as .txt) I am using Itunes 6- would Itunes 7 help this?
thanks- I have a lot of music to transfer and this is a problem.
Max

Moving file from one location to other in shell script

HI All,
I am facing one problem in moving file from one location to another location please help me out.
My code is as below :
mv ${file}.log ${DATA_XXX}/../archive/${file}.log_`date +"%m%d%y%H%M%S"`
mv ${file} ${DATA_XXX}/../archive/'abc'.`date +"%m%d%y%H%M%S"`
where file =test1 and DATA_XXX= "k01/aa/in"
please help me on this
Thanks

Please describe the problem. Perhaps you are missing the / i.e. /${DATA_XXX}

Using Command Line to move objects from one environment to another enviroment

Can the Command Line (sacmd) be used to move Job Groups/Jobs and other object from one environment to another environment? If so, how?

Moving jobs and objects can only be accomplished by using the Transporter application. There is a document called "Transporter User Guide" with a chapter called "Running Transporter in Batch Mode" that details how to send commands to transporter from the command line. It also details how to setup jobs in Tidal to use this command line. Once you have jobs in Tidal using the Transporter command line, you can then use sacmd to run these jobs.
Does this make sense?

How to Migrate WSDLs from one environment to other

Hi All,
can somebody please tell me how can WSDLs from one environment be migrated to other environments.
I could not see any option in CMU.
Do i need to create them Manually in every environment.
many thanks,
sapan

As I recall, you can manually move the file data/soap/custom/wsdl_custom.hda from the instance folder on one system to the other. Then, manually choose the option to publish the WSDLs from the WSDL generator tool in admin interface. Not automatic in any way (well, the publishing is kind of automatic) but certainly better than manually re-entering the WSDL definition.
Note that this will not do if you need to merge WSDLs from the first system to the second system. By moving the HDA file you will be replacing all custom WSDL definitions on the second system with those from the first.
Jon-Eric Eliker, Vision Marshal
Frontline Logic, Inc.
http://www.frontlinelogic.com

Migrating ODI objects from one environment to another

Hi,
This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
When i choose "Synonym Insert_Update" option to import is prompts error :
You are importing an object from another repository with same identifier. This is forbidden
This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
What should be followed to migrate objects ?

user8628169 wrote:
Hi,
This is for the first time that i am trying to migrate odi objects from one environment to another. I am facing issue and requesting help.
The odi installation is the part of ASCP module of JDEdwards where some standard objects (interfaces/packages) are already created. I have developed some custom interfaces and want to migrate the same to QA environment.
I exported the specific folder (including children) to an xml file and then trying to import the same in the QA environment.
When i choose "Synonym Insert_Update" option to import is prompts error :
You are importing an object from another repository with same identifier. This is forbidden
recreate your OA repository with repository id different from your DEV repository.
Then you should not get this problem.
This is completely new folder which do not exist on target. If I import using Duplication option, it successfully import and assigns new internal ID to object (which is as expected). But how will I update the newly created object in future ?
What should be followed to migrate objects ?

Migrating a webi report from one environment to another using import wizard

Hi Everyone,
Can anyone please tell me what all access should I have on my ID to be able to migrate a webi report from one environment to another environment(e.g. from development to quality).
Regards,
Neeraj Sharma

Hi,
To use the Import Wizard utility, you basically need Administrator, Full Control to Top-level folder, and "Add objects to the folder" and "Edit objects" for this user on the root folder.
You need the least restrictive role, because you require absolute control for content promotion between 2 entitlement systems.
the webi document is the cherry on-top, you;ll have universes, connections, folders to bring over too.
Regards,
H
p.s. check Note 1450708 - How to restrict access to the Import Wizard from a Business Objects Enterprise system
and
Note 1297121 - What rights needed to use Biar File Extraction for a normal user while using Import Wizard ?

How can I script moving paths from one file to another?

Hello. I have 1 image with various color correction layers. The other is the exact same size but only contains paths. How can I script moving paths from one file to another? Thanks, in advance, for any help you can offer. Thanks!

Thanks! This one actually worked for me. Thanks for your help.
http://forums.adobe.com/message/3305389#3305389

Problems moving distribution from one environment toanother

Similar Messages

Maybe you are looking for