Problems navigate to other page when handover an internal table

Hi all,
I am navigating from one bsp page to another bsp page within an bsp application. In the first page an internal table is filled, handed over to the second page, and displayed in an html table. Everything works fine, while the internal table is small, once the internal table is growing, system does not navigate anymore, instead a message is coming up: internal error 500 in the IE.
maybe there is a limitation on the html pagelenght, even if i did not limit ?
muchos gracias for any hints or suggestions. thx Michael

Hi Michael,
Server side cokies is also a very good option for
transferring bigger data, but using
navigation->use_auto_submit_form( ) is having some problems.... see this
Re: using navigation->use_auto_form_submit().
Hope it helps.
Regards,
Narinder Hartala
Message was edited by: Narinder Hartala

Similar Messages

Error "Error in ABAP statement when processing an internal table. table."

Hello,
I am facing the error when tried for GR from SRM portal for my shopping cart and for others created shopping cart. The error is
"Error in ABAP statement when processing an internal table. table."
I have the central receipient role. Couold any body assist me?
Thanks,
Pijush

Hi Harish,
Execute the query in RSRT and check whether you have any short dump is in ST22. This would give a clear idea at what might have gone wrong.
Another thing is to check whether the code for the variable is fine in the user exit.
Hope this helps.
Bye
Dinesh

Problem in displaying update page when multiple results table regions.....

Hi,
In Search page, I have 4 Search result table regions.(1.PropertyResultsTable,2.HouseDetailResultsTable,3.WaterDetailsResultsTable,4.ElectricityResultsTable)
In PropertyResultsTable Search result table region when I click the update Icon its showing the Last table region's(i.e ElectricityResultsTable) update page.
Same thing happening for 2.HouseDetailResultsTable,3.WaterDetailsResultsTable also.
If my search page contain only one result table region I can able to update the record successfully.
How to get the correct update page if there is more than one results table and each table has the update icon to update the respective record.
Please suggest.
Thanks & Regards,
Sagarika

Hi,
Thanks for your response.
Each search result table has its own controller and I have one RootController for handling 'Go' button click.
Here is the code,
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule am = pageContext.getApplicationModule(webBean);
//Transaction
if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext,
"waterDetailCreateTxn",
false)) {
am.invokeMethod("rollbackServiceInfo");
TransactionUnitHelper.endTransactionUnit(pageContext,
"waterDetailCreateTxn");
else if (TransactionUnitHelper.isTransactionUnitInProgress(pageContext,
"waterDetailUpdateTxn",
false)) {
am.invokeMethod("rollbackServiceInfo");
TransactionUnitHelper.endTransactionUnit(pageContext,
"waterDetailUpdateTxn");
* Procedure to handle form submissions for form elements in
* a region.
* @param pageContext the current OA page context
* @param webBean the web bean corresponding to the region
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
if ("update".equals(pageContext.getParameter(EVENT_PARAM))) {
// The user has clicked an "Update" icon so we want to navigate
// to the first step of the multistep "Update Employee" flow.
// Retain AM
// Do not display breadcrumbs
pageContext.setForwardURL("OA.jsp?page=/uttara/oracle/apps/uttaraimc/createCitizen/webui/WaterDetailUpdatePG",
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null, null, true,
OAWebBeanConstants.ADD_BREAD_CRUMB_NO,
OAWebBeanConstants.IGNORE_MESSAGES);
Thanks & Regards,
Sagarika

I recently updated my iTunes to the new version. For some reason the titles and details of songs on the SONGS page do not appear, although the songs will play. Has anyone else had this problem? Every other page seems to be ok.

I recently updated my iTunes to the new version. When I opened it I found that there were no details listed on the SONGS page. On all other pages the relevant pictures/details appear. Although there are no details showing on the songs page, the songs are obviously there as when you click on a line it plays the song that should be listed. Has anyone else had this problem? (I am using a Windows XP Pro system on my Laptop).

Did anyone ever suggest you reset your PRAM?
http://docs.info.apple.com/article.html?artnum=2238
Also might want to try resetting the SMC, although I
doubt there's an issue there.
http://docs.info.apple.com/article.html?artnum=304123
I'm getting tired of people who supposedly know what
they're doing simply guessing that resinstalling the
OS might solve the issue. It's like trying to dissect
a frog with a sledge hammer, and wondering why you
didn't learn anything about anatomy in the process.
These sorts of things, although bizarre, should be
(and probably are) fixable without major surgery.
Thanks for the suggestion... but I think my first question would be why these parameters would need re-setting? This is a new machine... It has never been shut down hard. It is used at most 10 hours per week... mostly using Office 2004 for MAC. I need to figure this out as I will soon need it as a Cs2/CS3 - Aperture workhorse.
I too agree that it is best not to use a sledge when a scalpel is needed... but as a novice to the MAC world I may have been misled by Apple support. I seems to have fixed the symptoms ( some) but appears NOT to have addressed the cause... which is what I am after.
Would TechTool Pro detect a bad HD or RAM?
Thanks....

How can I go to other page when click button??

When I click button, the process of this button is be executed, then current page will go to other page.
1.I setup this button's Optional URL Redirect to other page, but process is not be executed.
2.I create a process and a branch(point: on-summit:after process...), not setup button's Optional URL. at this time, the process is be run, but not go to other page.
please help me if you know it! Thanks a lot!

Do you need the process to do something or do you just want to forward to the next page. In this case you just need the branch. In the configuration you can choose the button that forwards to the next page.
Configuration in the branche:
Target type: Page in Application
Page: The Page you want to redirect to.
On clicked Button: The Button you created on the page which redirects to the next page
Hope i could help.
Philipp

In pages, when I make a table, the lines print very faintly. Any ideas?

Hello: when I make a table in Pages, the table will not print well; the grid lines are very faint.
I get the same result in Numbers.
Any ideas?

Hello.
You can choose the size of your border in Pages or Numbers.
To do that, you have to select your table.
After that, click on inspector.
You must have the cell borders option, set here the border width.
That's all !

Weird problem w. mysql 4.0 when inserting into a table with auto_incremet

Since I upgraded my mysql database from 3.23 to 4.0.1
the following code does not work anymore:
I get this error msg:
<b>"Invalid argument value: Duplicate entry '2147483647' for key 1"</b>
<code>
package mysql4test;
import java.sql.*;
class test {
public test() {
public static void main(String[] args) {
Connection connection = null;
Statement st = null;
try {
Class.forName("org.gjt.mm.mysql.Driver").newInstance();
connection = DriverManager.getConnection
("jdbc:mysql://192.168.0.4/x?user=x&password=");
st = connection.createStatement();
for (int i=1;i<10;i++)
String insert = "insert into x (b) values('hello');";
System.out.println(insert);
st.executeUpdate(insert);
} catch (Exception ex) { System.err.println(ex.getMessage());}
</code>
The table definition of table x is the following:
create table x(a int(11) primary key auto_increment, b varchar(10));
What makes the thing even more mysterious is, that doing the same thing as this programm does manually on an mysql client does not produces any error message.
insert into x (b) values('hello'); works fine on the mysql client deliverd with the server.

Hi eggsurplus!
Yes, I succeeded in different ways to solve the problem. changing the table was one of it. but the problem is that i can't simply change all tables (there are a lot) as the are used in other programms.
The simplest solution that i figured out so far was changing the insert from
insert into x (b) values('hello')
to
insert into x (a,b) values("+i+",'hello')"
But this solution is still not satisfactory as in more complex programs you can't just use the i variable of the for loop, but you have to add a new variable that increments on every insert.
This still means changing a lot of code that i wrote for mysql 3.x.
Besides, i tried also another jdbc driver and it still didn't work.
The same bug was reported in a PHP forum, but without solution

Problem in assigning field symbol to a nested internal table

Hi All,
I have searched the forum but could not find a solution to this problem. I have a requirement where I need to define an internal table within an internal table, so I have used pointer within the outer internal table(itab2) which point to the inner table. However, I am facing problem while assigning the pointer.
data: begin of struct1 occurs 0,
        fld3(10) type C,
       end of struct1.
data: begin of itab2 occurs 0,
        fld1(10) type C,
        fld2(10) type C,
        p_inner like ref to struct1,
      end of itab2.
field-symbols <inner_table> type any.
I want to assign "itab2->p_inner->* " to "<inner_table>".
However, the following statement is Not working:
assign itab2->p_inner->* to <inner_table>.
I want to fill the values within fields fld1, fld2 and fld3 and append it in itab2.
The final table should be like:
ITAB2:
fld1    fld2    fld3
aa      bb      cc
                 dd
                 ee
11      22      33
                 44
                 55
I have tried many other ways too but could not suceed, please help.
Thanks,
Vishal.

Thanks Matt,
But how do I append the values within this internal table ??
When I am using the following code:
ls_wa-fld3 = 'A'.
ls_wa-t_in-fld1 = 'B'.
ls_wa-t_in-fld2 = 'C'.
ls_wa-t_in-fld1 = 'D'.
ls_wa-t_in-fld2 = 'E'.
append ls_wa to lt_tab.
Its giving an error that:
The data object "LS_WA" does not have a component called "T_IN-FLD1".
I wanted the values to be appended in the following way in lt_tab:
fld3     fld1     fld2
A     B     C
     D     E
Please help.

Performance Problems with "For all Entries" and a big internal table

We have big Performance Problems with following Statement:
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
FOR ALL ENTRIES IN gt_zmon_help
    WHERE
    status = 'IAI200' AND
    logdat IN gs_dat AND
    ztrack = gt_zmon_help-ztrack.
In the internal table gt_zmon_help are over 1000000 entries.
Anyone an Idea how to improve the Performance?
Thank you!

>
Matthias Weisensel wrote:
> We have big Performance Problems with following Statement:
>
>
SELECT * FROM zeedmt_zmon INTO TABLE gt_zmon_help
>   FOR ALL ENTRIES IN gt_zmon_help
>     WHERE
>     status = 'IAI200' AND
>     logdat IN gs_dat AND
>     ztrack = gt_zmon_help-ztrack.
>
> In the internal table gt_zmon_help are over 1000000 entries.
> Anyone an Idea how to improve the Performance?
>
> Thank you!
You can't expect miracles. With over a million entries in your itab any select is going to take a bit of time. Do you really need all these records in the itab? How many records is the select bringing back? I'm assuming that you have got and are using indexes on your ZEEDMT_ZMON table.
In this situation, I'd first of all try to think of another way of running the query and restricting the amount of data, but if this were not possible I'd just run it in the background and accept that it is going to take a long time.

Space removed from character data type when move to internal table issue...

Hi Friends,
I converted material code and other details into internal table which have corresponding data types.But in internal table,I can see material code as left justified ,but after that space was removed.For example if material code is 'ABC' then rest of the space(material char(18)) are removed.But I need remaining spaces.I tried to concatenate material code with spaces (caoncatenate matnr ` ` int etc .. )at right side and moved to another internal table.Its working.But the problem is material codes have different values like one material 'ABC' and another like '123893-h' etc.So I need to calculate the space(out of char 18) dynamiclly and need to put space based on material code value.
<< Moderator message - Everyone's problem is important >>
.Thank you all..
Regards,
Kumaran..
Edited by: Rob Burbank on Oct 26, 2010 11:18 AM

Hi Ramkumaran,
You have not told the purpose of having these spaces.
is it for transfering to a file?
If that is the case, use a table with fixed lenght lines instead of many fields.
i.e. try something like this
DATA : i_tab type standard table of BUSDATA,
wa_tab type BUSDATA.
wa_tab+0(10) = material number.
wa_tab+10(10) = material code.
wa_tab+20(4) = company code...
append wa_tab to i_tab.
Thanks
Vimal

Error "Screen output are too small" when looping through internal table!

Hello All:
I have a huge internal table with some 79000 records and while looping through them and doing some other processing inside the loop, I am getting an error "Screen output are too small"! Could someone please help mw how to fix this issue? I can send the all the code if anyone wants to look at the code. Thanks in advance and rewards are assured.
Mithun

Hi,
Check this
new-page print off.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = v_dest
IMPORTING
out_parameters = params
valid = valid.
* params-linct = '58'.
* params-linsz = '170'.
* params-paart = 'X_58_170'.
* params-prtxt = v_spool_text.
* params-primm = 'X'.
* params-prrel = 'X'.
NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
After the call fm GET_PRINT_PARAMETERS params internal table contains all the values for generating spool.
aRs

Problem with grid display in ALV for dynamic internal tables

Hi,
I am using dynamic internal tables in my program. To display it in grid format after populating it, I have used the following class and method. Here Im getting sy-subrc = 0 but, the grid is not getting displayed. Can some one pls help me with this.,
DATA: W_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: w_tabname TYPE w_tabname.
CREATE OBJECT W_GRID
EXPORTING I_PARENT = CL_GUI_CONTAINER=>SCREEN0.
CALL METHOD W_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
   I_BUFFER_ACTIVE               =
   I_BYPASSING_BUFFER            =
   I_CONSISTENCY_CHECK           =
    I_STRUCTURE_NAME              = W_TABNAME
   IS_VARIANT                    =
   I_SAVE                        =
   I_DEFAULT                     = 'X'
   IS_LAYOUT                     =
   IS_PRINT                      =
   IT_SPECIAL_GROUPS             =
   IT_TOOLBAR_EXCLUDING          =
   IT_HYPERLINK                  =
   IT_ALV_GRAPHICS               =
   IT_EXCEPT_QINFO               =
   IR_SALV_ADAPTER               =
CHANGING
    IT_OUTTAB                     = <FS_1>
    IT_FIELDCATALOG               = LT_FIELDCATALOG2
   IT_SORT                       =
   IT_FILTER                     =
EXCEPTIONS
    INVALID_PARAMETER_COMBINATION = 1
    PROGRAM_ERROR                 = 2
    TOO_MANY_LINES                = 3
    others                        = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Here, <FS_1> is the field symbol of table type and it holds all my data. and LT_FIELDCATALOG2 is the structure of my fieldcatalog
Thanks and Regards,
Avinash

Hi Avinash,
Either use parameter
I_STRUCTURE_NAME = W_TABNAME
or
IT_FIELDCATALOG = LT_FIELDCATALOG2
Both are not required.
At the end of ur program simply use a write statement like below. Your program will work.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Write /.      <----
Thanks,
Edited by: Sap Fan on Oct 6, 2009 7:17 AM

Performance Issue When Read from Internal Table

In my form, I have 6 windows which contain all the header information, which are kept in my gt_header internal table. Since all windows required data from the same internal table, reading the internal table at Initialization for once or, creating the LOOP at each window, which one will be a better choice in terms of performance?

Hi,
you cannot create 6 windows under loop.You can only have loop under a window only.
So create a big window which covers whole area of 6 windows.Create templete under that and write only one loo with text in all those boxes of that templete.
Regards,
Rock.

I get a "Bad Request Error 400" when trying to get to Gmail. I am running Firefox 3.6.16. No problems getting to other pages or getting to Gmail through IE (ick).

I am running XP and Firefox 3.6.16. Problem started in middle of day, nothing else that I can point to that might have triggered it. Have restarted and that doesn't work either. Doesn't seem to have affected other sites.

You're welcome

Can't navigate to a page when using a class method

I am working on windows phone 8.1 universal app where I have created a class method and placed it in the NavigationHelper_LoadState method of one of the pages in my app. My navigation is as follows, I click on a link on my Mainpage and that takes me
to the page in question, where I have placed the class method in LoadState.
The class method checks the authentication state of the user. If the user is not logged in, it is supposed to take him to a separate login page (SHDSignIn from the snippet below).
The problem I am running into is that when I hit that part of the code in my class method, it just steps through the redirect code but doesn't take me to the login page but rather takes me to the page that was clicked from mainpage.
From the troubleshooting I have done up to this point seems like an issue probably because I am calling the method from NavigationHelper_LoadState and the system doesn't like it?? Can someone please explain and also provide a workaround for this?
Here is my code for the class function:
public async void SHDAuthState(string errormessage, ProgressBar myprogressbar, TextBlock mytextblock, TextBlock myservernetworkerror)
//Get the values for the userID and password from the settings....
string shdLoggedInValue = (string)appRoamingSettings.Values["shdLoggedIn"];
//If not logged in, redirect to the SHD sign in page...
if (shdLoggedInValue != "Yes")
this.rootFrame.Navigate(typeof(SHDSignIn));
//Getting the cookie if it has expired..
else
//Get the cookie value...
string myCookieValue = (string)appRoamingSettings.Values["MyCookie"];
//Get the original cookie obtain time....
long CookieObtainedTimeValue = (long)appRoamingSettings.Values["CookieObtainedTime"];
//Convertig date/time back to DateTime object....
origCookieObtainedTime = DateTime.FromBinary(CookieObtainedTimeValue);
currentDateTime = DateTime.Now;
//Check to see if cookie has expired....
cookieTimeElasped = currentDateTime - origCookieObtainedTime;
cookieTimeElapsedMins = cookieTimeElasped.TotalMinutes;
// 2 days = 2880 mins but we give a margin of 1 minute
//Get a new cookie if it has expired and save to settings
if (cookieTimeElapsedMins >= 2879)
// Start showing the progress bar...
mycontrols.progressbarShow(myprogressbar, mytextblock);
//Get the values for the userID and password from the settings....
string UserIDValue = (string)appRoamingSettings.Values["UserID"];
string PasswordValue = (string)appRoamingSettings.Values["Password"];
//Update the requestData string before sending.....
requestData = "{" + string.Format(RegisterRequestData, UserIDValue, PasswordValue) + "}";
string registerResults = await SHDAPI(registerUrl, requestData, errormessage);
if (registerResults != null)
// Get the cookie and the time and save it to settings
var shdCookie = JsonConvert.DeserializeObject<SHDHelper.SHDObject>(registerResults).RegistrationCookie;
//Save cookie to the app settings
appRoamingSettings.Values["MyCookie"] = shdCookie;
// build the UI
// Stop showing the progress bar...
mycontrols.progressbarNoShow(myprogressbar, mytextblock);
else
// Stop showing the progress bar...
mycontrols.progressbarNoShow(myprogressbar, mytextblock);
//Show the error message...
myservernetworkerror.Visibility = Windows.UI.Xaml.Visibility.Visible;
Also, I have the rootFrame defined as follows in my class:
Frame rootFrame = Window.Current.Content as Frame;
I am calling the class method from the LoadState method as follows
SHD_helper.SHDAuthState(errorMessage, pgbar, pgText, ServerNetworkError);
thanks
mujno

that is correct. I wanted to keep the login page redirect inside my class method so that I could do the check every time someone came to pages that require authentication. I wanted it in the LoadState method so I can do a check there, redirect
them to login page or just get a cookie and then pass that cookie to page to build the UI for the page
I can do what you are suggesting and have actually tried it but then I have to track which page to take the user to after they log in...
I have multiple clicks in the appbar and pages from where the user can come to these authentication-bound pages..
Suggestions?
Also, what am I doing wrong in my class method that it doesn't navigate to the login page in the LoadState method?
Thanks
mujno

Problems navigate to other page when handover an internal table

Similar Messages

Maybe you are looking for