Problems putting Adjustment Listener to the JScrollPane

Can we add an addJustment Listener to the JScrollPane.

You can add a ChangeListener to the corresponding JViewport. See the JViewport docs.

Similar Messages

What is this Screen Problem that adjusts itself with the lid movement ?

I am getting this problem, check out the video to know it exactly and I am posting images for quick reference too. And let me know, what is this and what can be done to rectify it. This machine was bought in December 2013 and it has been approximately 1.5 years and I am getting this weird prolem which seems to grow only. PS. I have updated my BIOS. http://postimg.org/image/681qtc0pj/
http://postimg.org/image/eetqkwqs7/
http://postimg.org/image/gko1feu8n/
http://postimg.org/image/4mr2f9fvb/
http://postimg.org/image/7je3fjlp3/
http://postimg.org/image/6ftz3l11z/
http://postimg.org/image/6pww96qaf/ and here is th video link - https://drive.google.com/open?id=0BymANDKV-8hfTVVIclZmX285cWc

Hi , Thank you for posting. I have read your post, and I understand that you are experiencing a problem with the display. Here is a link may help you.HP Notebook PCs - Troubleshooting a Notebook LCD Panel Issue (Windows 8/8.1, 7) If you finish the troubleshooting, and find out it is a hardware issue, please use the following link http://www.hp.com/contacthp to create a case for your issue, and contact HP. If you live outside the US/Canada, please click the link below to get the contact information for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html Let me know if you need further assistance. Good luck,

Why the JScrollPane not scroll?

I create a dialog,then I put a JScrollPane on the dialog,after this I put a JPanel on the JScrollPane,
finally I put many checkbox on the JPanel.Due to having many checkboxes, I hope that JScrollPane can scroll,but it cannot scroll .how can I sove this problem?
the following is my code:
this.setSize(new Dimension(543, 523));
this.getContentPane().setLayout(null);
jButton3.setText("ok");
jButton3.setBounds(new Rectangle(235, 455, 95, 30));
jButton4.setText("cancel");
jButton4.setBounds(new Rectangle(395, 455, 100, 30));
// jScrollPane1.setBounds(new Rectangle(0, 20, 515, 1195));
// jScrollPane1.setAutoscrolls(true);
jPanel1.setBackground(Color.cyan);
jPanel1.setLayout(null);
jPanel1.setAutoscrolls(true);
jPanel1.setBorder(BorderFactory.createBevelBorder(BevelBorder.LOWERED));
jCheckBox1.setText("attrib_manager");
jCheckBox1.setBounds(new Rectangle(10, 10, 110, 25));
��
jCheckBox66.setBounds(new Rectangle(205, 1120, 97, 26));
jCheckBox66.setEnabled(false);
��
jPanel1.add(jCheckBox66, null);
jPanel1.add(jCheckBox1, null);
JScrollPane jScrollPane1 = new JScrollPane(jPanel1);
jScrollPane1.setBounds(new Rectangle(0, 20, 515, 425));
jScrollPane1.setAutoscrolls(true);
jScrollPane1.getViewport().add(jPanel1, null);
this.getContentPane().add(jScrollPane1, null);
this.getContentPane().add(jButton4, null);
this.getContentPane().add(jButton3, null);

You have to set size of your panel.
override method getPrefferedSize() of panel. This methd should return correct size of content.
best regadrs
Stas

When you create a link to a web page in numbers and we export the PDF file, the link is offset by 3 rows. Example: if I put a link on the text in cell A1, I found the link A4. In fact, this feature becomes unusable. How can we solve this problem? Thank yo

When you create a link to a web page in numbers "Mavericks" and we export the PDF file, the link is offset by 3 rows. Example: if I put a link on the text (with Cmd-K) in cell A1, I found the link A4. In fact, this feature becomes unusable. How can we solve this problem?
Thank you.

Hi again Raja!
I did as you recommended and installed HTTPWatch and below is the outcome of that program. It is the exact string with the only exception of obfuscated servernames and portnumbers. The last part that begins with "sap_ep_baseurl=" makes me suspicious, is that part really correct? It looks like it's lacking things.
Best regards
Benny
http://<server:port>/sap/bc/bsp/sap/Z_PURCHASE_REQ/process.htm?
sap-syscmd=nocookie&sap-client=200&sap-language=sv&style_sheet=
http%3A%2F%2F<server>%3A<port>%2Firj%2Fportalapps%2F
com.sap.portal.design.portaldesigndata%2Fthemes%2Fportal%2Fsap_tradeshow%2F
controls%2Fcontrols_ie6.css%3F7.0.10.0.0&sap-cssversion=7.0.10.0.0&sap-tray-type
=null&sap-tray-padding=null&sap-accessibility=&sap-ep-version=7.00.200611091758&
sap_ep_version=7.00.200611091758&sap_ep_baseurl=http%3A%2F%2F
<server>%3A<port>%2Firj%2Fportal&matnr=9780198603641

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto?

I have photos on my iphone 4 that i'm trying to transfer to iphoto. The problem is when I plug the phone in, it only wants to transfer the new photos, not all. How can I take all the photos off my phone and put them into iphoto? Even if there are duplicates, I'd like to make sure I get all the photos from my phone into iphoto. Thanks

To see all the photos on the phone, including photos that have already been imported into iPhoto, deselect the "Hide Photos Already Imported" checkbox. If the camera contains photos that have already been imported into iPhoto, those photos are hidden by default.

I have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time

i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.

i have Adobe premiere 12 elements I have Buy it but this program is Corrupt. the are no sound on the time line. I have sound in my computer, this is no problem, I can listen every another things but NO Elements 12 OK I make ia video take down to the time line. Video is OK BUT NO sound I have makit in 2 veeks from monday to next vek here whit this very bad program so i go to garbags I think I buy a another program is be better and have a Sound. This is very bad I am not god to English. I Have a pro camera and I will have a god support but this is very bad. I is bad to English. But this Program I buy i think this is very Corrupt. The mast find a sound in this program. I cvan not understan if You can sell this very bad program Videoredigering and this program have nothing sound. This is crazy.

I have Mac mini and I'm trying to listen to music through YouTube it works. But my problem is that instead of the music playing through the tv speakers it plays through the Mac box. ):

I have Mac mini and I'm trying to listen to music through YouTube it works. But my problem is that instead of the music playing through the tv speakers it plays through the Mac box. ):

Are you using HDMI or an Apple Airplay Module to go to the TV Speakers?
If you are using an HDMI it's straight through output. The internal speakers are disabled.
If you are using an Airplay Module:
- Go on iTunes
- Locate the Airplay icon that has a TV with an up arrow icon much like your iPhone has for Bluetooth
- Click on that and Airplay to ModuleName

When i put my iPhone in the logitech dock and i start the music it stops at exactly 1 Minute. What's the problem? I cleaned the contacts, the same happened again. always after 1 minute the music pauses!

When i put my iPhone in the logitech dock and i start the music it stops at exactly 1 Minute. What's the problem? I cleaned the contacts, the same happened again. always after 1 minute the music pauses!

It is a known issue and un-conventional remedy.
It is Hardware failure. I would get the iPhone changed for a good one.

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?

This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
tt2

I am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error

i am facing problem when configuring listener.ora and tnsnamess.ora in listener side it is showing The listener supports no services The command completed successfully and in when i cross check with listener from tns it is showing the error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
here is my listener file
lsn =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
      (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.125.128)(PORT = 1575))
#ADR_BASE_LISTENER = /u01/app/oracle
(SID_LIST_LISTENER=
(SERVICE_NAME=kull)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/db_1)
tnsnames.ora
to_lsn=
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = kull )
my database name is kull
please somebody help

Biswaranjan wrote:
i have two database one is kull and another is kk
i configured listener.ora in kull
and tnsnames.ora in kk
when i am running lsnrctl start listener in database kull
This makes no sense. You don't configure a listener nor a tnsnames.ora "in a database".   I hope this is just a language issue and not reflective of a fundamental misunderstanding of how tns works.
read: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/ Help! I can’t connect to my database
read: http://edstevensdba.wordpress.com/2011/02/16/sqlnet_client_cfg/ Help! I can’t connect to my database (part duex)
it is showing the message
Alias                     lsn
Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date                05-JUL-2013 19:08:06
Uptime                    0 days 0 hr. 0 min. 0 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
Listener Log File         /u01/app/oracle/product/11.2.0/db_1/log/diag/tnslsnr/server1/lsn/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1575)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=server1)(PORT=1575)))
The listener supports no services
The command completed successfully
and in another database in kk when i am giving the command tnsping to_lsn
it is giving this message
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = server1)(PORT = 1575)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = kull)))
OK (0 msec)
but when i am cross check sqlplus system/manager@ to_lsn
it is giving the following error
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor

Problem in adjusting the brightness manually

Hi,
I have purchased HP Pavilion 15-n205TX with win 8.1 recently.
I have problem in adjusting the brightness of my screen. When i do it manually by pressing the keys f2 and f3, there is no change in the brightness of the sreen.
Even when i try to change it from Settings-Brightness, there is no change in the brightness
This question was solved.
View Solution.

Hi AG_8055,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion 15-n205tx Notebook and brightness not working correctly. You could try a refresh on Windows 8 stops anything that has not closed correctly. You could try a BIOS update. The HP Support Assistant will help you install the drivers and software for your machine. It will locate the correct driver update for the brightness. Here is a link download the HP Support Assistant if you need it.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Early today Alt, Ctr and Click and drag changed the brush size. Now it makes the move tool work. Anyone have this problem. I think Adobe had an update and put a bug in the program.

Early today Alt, Ctr and Click and drag changed the brush size. Now it makes the move tool work. Anyone have this problem. I think Adobe had an update and put a bug in the program.

Which version of photoshop and operating system are you using?
windows:
Alt + right click + drag left or right
mac:
Control + Option + left click + drag left or right

Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer

Hi , I have problem with my iphone 4s the wifi I can't put it on or off it's not worked with me , so what can I do plz answer me as soon you can

Hi , I have problem with my iphone 4s the wifi I can't put it on or off it's not worked with me , so what can I do plz answer me as soon you can

if it wont turn on or off the wifi ground connector could be loose. backup and restore the phone to new and see if it works then if not take to someone who fixes iphones

JScrollPane doesn't adjust itself to the view component

I have an applet that shows a JPanel in JScrollPane:
form the applet:
public void init() {
getContentPane().setLayout(new BorderLayout());
panel = new SnapCanvas(); //snapCanvas extends JPanel and is not a Canvas
drawGraph(graph);
jScrollPane = new JScrollPane(canvas);
getContentPane().add(jScrollPane, BorderLayout.CENTER);
setVisible(true);
canvas.repaint();
Now this works fine, but if the JPanel's (called canvas in the code) prefered size is changed the scroll pane doesn't adjust itself. What do I do in order for the JScrollPane to adjust when the JPanel is changed?
Thanks

foubd the solution in http://java.sun.com/docs/books/tutorial/uiswing/components/scrollpane.html#sizing

Problems putting Adjustment Listener to the JScrollPane

Similar Messages

Maybe you are looking for