Problems running move-spsite

So I am logged in as the farm admin, and I have a sharepoint console started with "Run as" admin.
I run
move-spsite -identity http://myfarm/sites/FE -destinationDatabase ContentDB_FE
The database exists.
I start the command and it runs for 1 hour 59 minutes and then I get this error:
Move-SPSite : The transaction log for database 'ContentDB_FE' is full. To find out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases
At line:1 char:38
+ Move-SPSite <<<< -Identity
http://myfarm/sites/FE -DestinationDatabase ContentDB_FE >> d:\temp\mvlog.txt
    + CategoryInfo
: InvalidData: (Microsoft.Share...PCmdletMoveSite: SPCmdletMoveSite) [Move-SPSite], SPCmdletException
    + FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletMoveSite
I talked to the DBAs. They have transaction logging set to simple. They trimmed the log. They freed up space on the drive where the transaction log is located.
And still I get this error.
Does anyone have any other suggestions that I could pass along to the DBAs?

I have seen issues with false error messages around the log files in the past. Two hours is a long, long time for that comandlet to run. If memory serves the Backup-SPSite and Move-SPSite comandlets are only recommended for 100GB or smaller site collections
as over that size they can fail. Would you be over the 100GB point?
Nigel Price was looking at this a few months back, i'm not sure if he ever found a good solution.

Similar Messages

Problems importing .mov file

I am all of a sudden having problems importing .mov files from my camera in iPhoto '08. Can't get them to import in Image Capture either...On the import preview screen, all that comes up are empty "boxes". If I highlight one of the boxes, it shows that it is .mov file, the size of the file, etc. but if i try to do the import, iPhoto just locks up.

iPhoto does not like very large movie files for importing directly from the camera. If you get it on the desktop you should be able to import it. I've imported 200MB movies with no problem.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Problems importing movies into Keynote

I have been using Keynote for a couple of years (now using Keynote 08 on a MacBook running 10.5.5). I recently started having problems importing movie files into my Keynote presentations. I usually just drag a .mov file and it plays with no problems, but lately when I do this it doesn't appear on the Keynote slide and when I play the presentation I get only audio w/ no video. I tried importing the files to quicktime and exporting them again to be sure they were in the correct format. This seemed to work a few times, but now that isn't working either. Any suggestions?

I'm having what sounds like the same problem. I have Quick Time video from a Flip Cam that I want to use in a KeyNote presentation. I added the movie successfully at first, but when I opened the file to continue work, it appeared as a black box. It has sound, but no image. I can see it ok in the navigator. I've searched the forum for answers, but haven't found anything that works yet.
Does the display setting have anything to do with this? One of the computers I work on has the display set to use with a LED projector. Thanks

Problems playing movies from Time Capsule

I am having a problem playing movies from my Time Capsule to my Apple TV. I can make them work but have to go through the following process: I have to play the movie through iTunes and then stop it, and then go play the movie on apple TV. I have to do this each time I want to watch one of the movies. Any thoughts on this issue?

Hopefully this information will help. I have an aiport extreme connected directly to my Cable Modem. I then setup the Time Capsule to extend the network updstairs. I have everything running on 802.11n. Wireless connection is great and I get about 13-14mb download speeds when I do a speedtest.
I must say though, copying data to the Timecapsue via wireless is slow...
I checked my apple TV this morning, and the first movie I clicked on worked great, so did the second one, then I tried a third and got the following error: "The Selected Video could not be played. The Format was not recognized"
Then I went back to play the original two that worked, and they now gave me the same error... it almost looks like it is looking connection to them, or synching or something..

Problems playing .mov files in QuickTime 7.2.0

Hey everyone!
I have a problem with my QuickTimePlayer.exe application. It will play all other movies just fine, except for .mov files. It will open them and play .mov files, the sound will be fine, but the video is extremely choppy.
I FINALLY got to play .mov files by uninstalling QuickTime 7.2.0 and installing the Vista Codec Package 4.4.8, which contains QuickTime Alternative. The only problem is that it doesn't come with QuickTimePlayer.exe, which is what I want my .mov files to open with.
After hours of installing, uninstalling, and re-installing codecs, I discovered that it wasn't a codec problem at all. It was the QuickTimePlayer.exe application that was the issue.
But what's weird is that the exact same version of QuickTime on another computer will run .mov files *WITH QUICKTIMEPLAYER.EXE!!* So there's something going on with some settings in my computer.
I can't seem to figure this out. Does anyone else know what the problem could be? Thanks in advance!
Brent

I've discovered the problem!! It was the latest release of the NVIDIA nForce drivers that were the issue.
For as to WHY this specifically affected the playback of .mov files, I can imagine how. It's weird how the one thing you least expect to be the problem actually IS the problem.
Anybody have any idea how it affects it?

Problems running Flash 11.7.700.224 on Fire Fox 22.0

Problems running Flash 11.7.700.224 on Windows 8, browser Fire Fox 22.0. Plug-in crashing and/or not responsive messages; browser hanging and/or slow, especially when opening new windows; You Tube videos error messages; Flash not detected on Adobe Troubleshooting page, even though installed; Flash content loads but does not display in window (no frame, or black or white screen in frame). Thank you for any reply, hopefully simple -I'm not technically inclined.

After using Flash player 11.8.800.94 for one day, it crashed.
So, I uninstalled it using the uninstaller provided by adobe then
disabled avast then
reinstalled 11.8.800.94.
Attempted to restart, but got this error message:
The exception unknown software exception (0xe0434352) occurred in the application at location 0x74c02005.
While writing it down, restart reverted to desktop.
Successfully restarted and opened FF22.0 browser and
went here: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_the_Flash_ Player_version_installed_on_your_machine to check version.
I could not see the Flash movie, the version checker said that Flash Player is not installed -- even though it shows Shockwave Flash 11.8.800.94 installed on the plugins list on Fire fox add-ons manager.
Is there a difference between Flash Player 11.8.800.94 and the latest Flash Player plugin for Fire Fox, or are they the same thing?
I have no idea how to fix this and not finding any clear answers on any of the other discussion question pages on this topic.
Can anyone from Adobe please help?

Are there any problems running oracle database express 10g and iis together

Are there any problems running oracle database express 10g on an windows 2000 server or advanced server running iis 5?
Does oracle database express cause any conflicts with iis (because of used ports etc)
Could an server have running on it, both an website using iis and an oracle database express website without conflicts?

I would not expect a problem under normal circumstances.
Oracle's listener is set for a default port 1521 for database requests, port 8080 for HTMLDB requests. The database connections generally find an empty port above 1024 when establishing a connection.
So, if IIS does not want to use 1521 or 8080, you will generally see no challenges. Even then it is fairly easy to move ORacle's port requirements elsewhere.
Using port 8080 seems reasonably common, but that is easily changed - search for sethttpport in this forum. IIS tromping on 1521 would be rare as it has been a well known Oracle service port since, roughly, forever.

[svn:fx-gumbo_beta2] 10484: Fix for autoCenter problem when Move/ Resize effects are used.

Revision: 10484
Author:   [email protected]
Date:     2009-09-21 19:38:14 -0700 (Mon, 21 Sep 2009)
Log Message:
Fix for autoCenter problem when Move/Resize effects are used. autoCenterTransform calculates the center dynamically, using the current width/height of the target. This calculation can be one frame off if a Resize effect is running in parallel with the transform effect. Also, containers do their validation lazily, so they need to be forced to validate in order to have an up-to-date width/height. This fix addresses these problems by reordering the effects in a Parallel hierarchy to put the Resize effects (and composite effects containing Resize) at the front of the set of effects and by calling validateNow() on the target of a transform effect prior to calculating the transform center (if appropriate).
QE notes: None
Doc notes: None
Bugs: SDK-23306
Reviewer: Jason
Tests run: checkintests, Mustella spark/effects mx/effects, manual tests
Is noteworthy for integration: Yes
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23306
Modified Paths:
    flex/sdk/branches/gumbo_beta2/frameworks/projects/framework/src/mx/effects/effectClasses/ CompositeEffectInstance.as
    flex/sdk/branches/gumbo_beta2/frameworks/projects/framework/src/mx/effects/effectClasses/ ParallelInstance.as
    flex/sdk/branches/gumbo_beta2/frameworks/projects/spark/src/spark/effects/supportClasses/ AnimateTransformInstance.as

Dear Pallavi,
Very useful post!
I am looking for similar accelerators for
Software Inventory Accelerator
Hardware Inventory Accelerator
Interfaces Inventory
Customization Assessment Accelerator
Sizing Tool
Which helps us to come up with the relevant Bill of Matetials for every area mentioned above, and the ones which I dont know...
Request help on such accelerators... Any clues?
Any reply, help is highly appreciated.
Regards
Manish Madhav

ITunes 7.0.1(7): Problems Downloading Movies from iTunes Store

Prior to installing the iTunes 7.0.1(7) upgrade, I had no problems downloading movies from the iTunes store. After I noticed that there appeared to be rate-limiting on the inital movie that I purchased, I simultaneously downloaded three other movies and watched one of the movies while they were downloading.
No problems with downloading multiple movies but severe problems with using iTunes 7.0.0 as a viewer. An inadvertent movement or click of the mouse resulted in the video portion of the movie disappearing. To solve the problem, I created symlinks in the QuickTime Player's ~/Movies directory to the downloaded movies. Using QuickTime as a viewer was a significant improvement over iTunes.
Upgraded to iTunes 7.0.1(7) when it was released. Today I discovered that the release has significant problems downloading movies.
After the initial download of the movie to /private/tmp, the iTunes download panel displays a message stating that it is processing the file. One would assume that it is inserting the chapter bookmarks and transferring it to the ~Music/iTunes/iTunes Music/Movies directory.
Not so. Its downloading the movie a second time. The processing file message is displayed a second time followed by a pop-up window reprting that the file is corrupt with an error code of 10008. Looks like one of Window's infamous network error codes. Wonder what it's doing on a Mac?
Enough of my diatribe. Are others seeing this? Do you have a "work around" or solution to the problem?
PowerBook 17, PowerMac G5 Mac OS X (10.4.8) iTunes 7.0.1(7)

I did run Disk Utility after reporting my problems here and to the iTunes Store. The "Check Permissions" scan found two iTunes with the incorrect permissions. As the permissions were correct prior to the upgrade, I presume the executable permission flags were turned on during the upgrade. Repaired the permission problems.
Also, I performed a reboot as was mentioned in a discussion of a slightly different problem. I was able to download one of the movies. The second failed about half-way through the download with a 9006 error.

Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

Since itunes and apple tvs latest update I have had problem wtching movies on apple tv via my itunes can any one help, movie takes a very long time to load sometimes never, it use to work really well, whats going on please help?

You might find useful information in item D1 of Time Machine Troubleshooting.

Problem Running SSIS Package with a SQL Server Agent

SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

I accidently created two posts. The newest one has the details.
I did not mean to.
SQL Server: SQL Server 2012
VS: Visual Studio 2012
Hello,
      I have been having a problem running SSIS packages by using a SQL Server Agent job. I first created these SSIS packages in a separate IS project in Visual Studio. I imported the packages to the Integration Services (Package
Store) instance on my SQL Server and tried to create a job that would run them from there.
      At first I read around about needing a proxy account to allow the agent/packages to access the file system since these packages are importing data from a flat file in the SQL database. So I created a temporary admin user to
use as the user for the agent. I did this by going to Services.msc on the server and linked the account the agent's "logon as". Then arose another issue where I am getting an error about using the incorrect type for my connection managers.
The connection manager "TestFile" is an incorrect type. The type required is "OLEDB". The type available to the component is "FLATFILE". Source: Data Flow Task Flat File Destination [2]     Description:
Cannot open the datafile "O:\*****\Success.txt"
I am not sure what this even means as I am getting this error even with a test package that doesn't do anything with the database. I have just two flat file connection managers in this test project one for grabbing the source file and one for
creating the new test file.
I am not sure what to do.
Thanks in advance,
Matt

Im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor.

im trying to download itunes 10.5 but keep getting error message that says: There is a problem with this Windows Installer package. A problem run as part of the setup did not finish as expected. Contact your support personnel or package vendor. I am using windows XP 32 bit, all the other computers in my house downloaded just fine, no problems, however this is the computer my iphone is set up to, ive tried doing a virus scan, windows update, downloading other things, updating everything possible, everything works fine, its just itunes that wont download, anyone have any other ideas?

Yes, I had found a similar solution also. I'm running XP Pro, SP3. I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair. Then run the 10.5 exe.
While the programme updated from version 8 of iTunes, my new iTunes is now a mess. Not all of my music was in the same folder previously but it all showed up on iTunes. Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing. I haven't begun to work on that.

Problem running BI template installer after upgrade to 2004s

Hello,
After upgrading our Portal from EP6 to EP7 I have a problem running the BI template installer. The failure occures right at the beginning. The installer is looking for SLD related parameters in the 'CTC> Propertysheet SystemProperties'.
But there are only three parameters in the sheet :
HOST, SYSTEM_ID, INSTANCE_ID.
If you instal a new 2004s system you see much more entries in the 'Propertysheet SystemProperties'.
My question is how to add these missing entries into the 'Propertysheet SystemProperties'.
Thanks
Boaz

Hi Kaylan,
Actually there are only two things to manually fix after the CTC template run, which is mentioned in the Blog:
- check/correct the following settings in the NetWeaver Administrator for evaluate_assertion_ticket and ticket according SAP Note 945055
- the entry in table RSPOR_T_PORTAL for Platform and PDF fonts
If you uncertain, you can remove the created objects as stated in the Document http://scn.sap.com/docs/DOC-11607 => Page18 in the Notes Section. the CTC template is creating these objects and entries again.
Best Regards Roland

Having problem running an application

I have recently installed jdk 1.2.2 and i have no problem running applet but when i try to run an application i get the message 1 error can't find<filename> . java.
The path in autoexec.bat is fine. JRE File is include in my file jdk1.2.2.
I have installed and deinstalled it a couple of time and can't make it work.
Could someone help me please!!
Thanking you in advance!

doesn't sound like a path problem at all. you say when you try to RUN the app you get a message can't find filename.java. When you're running the app you run the binary class file i.e. java MainClass.class. If you're compiling the app you would do javac MainClass.java. Clarify your situation further if this does not help you out.

Problem running Lex in project created with Forte C++

I am having a problem running Lex in project using Forte C++ 6. I believe I may have an installation problem, but can't figure out where it is.
I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Is there another version of Lex installed by Forte C++ that is different than Lex from Solaris?
Ron

I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Yes, try in google.com
Wishes , a [url http://personallfiles.com/Grant.Scholarship.asp]federal grant and scholarship-in need for me

Problems running move-spsite

Similar Messages

Maybe you are looking for