Problems saving contacts

So lately, I've been saving new phone numbers, but then within a few hours or days the contact is gone, which is very frustrating. How can I fix this?

Great news, I thought the problem was that it was PINK
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Similar Messages

Problem saving contacts in xperia z1. after saving new contacts, it is not shown in contacts list

problem saving contacts in xperia z1. after saving new contacts, it is not shown in contacts list

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
It sounds like you have a filter enabled in your contact app. Open contact > menu button > filter and see if you have any filter for your phone contact or Google contacts. Also check that "show online contacts" is unchecked.
What are your thoughts about this forum? Let us know by doing this short survey.

Problems saving contact ringtones

Is anyone else having problems saving contact ringtones? I tried changing it and it keeps stay as default. I've tried both the ringtones that came on the razr and also one I bought and it still says default. I went into the contacts, went to menu, chose options, ringtones and chose the ringtone I wanted and hit ok, but it still says Default. Any suggestions?

Patients Billy Patients Just sat Take a Min. Maybe Two! And give this a Look
Motoblur: On Motorola’s phones, like Samsung’s, there’s an easy way to ensure that new contacts are always saved to Google. When you go into the Contacts application, go to Menu -> More-> Settings then Choose Contact Storage-> and it'll provide you with your various options to save the contacts to, Google being one of them. Give this a Try..

Having problems saving contacts on 4s after reset caused by disabling

Am having problems saving contacts manually on my iPhone 4S after total restore caused by disabling. Can anyone help.

In case of ur memory card there are different options available to you to get rid of the corrupt/unwanted data in your card.
menu--installations--application manager--remove the unwanted application....... in ur case themes
menu--tools--memory---options---format memory card......
remember everything including ur factory installed apps will be deleted......... but u can always download them later either from nokia or google them...
or insert ur card in any reader or laptop and check for virus and also the hidden folders....... if there is something left of the application then u will find it in the hidden folders and delete it.......
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

Saved contact problems,I just see the numbers not savedcontacts!

In iphone 4.1 I don't see saved contacts just numbers,
Except for my wife & kid,
No matter what I do when a contact calls I don't see the
Contact info,
What should I do?

Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever.

How do I change the default folder for saving contacts?

I have happily used Outlook for several years for POP accounts. My recent addition of an Exchange account has hijacked several default behaviors that I was used to. For one, contacts are now saved by default in the exchange related contact
folder instead of the folder that is associated with my primary POP account. How do I reconfigure Outlook to saved contacts to my preferred folder, so that I don't have to constantly move the new contacts after they are saved? I do not want this
information on the exchange account. This bad behaviour occurs no matter what email account is read, from which I am saving the contact info.
To reproduce the problem: Open a message in the POP email, right click on the FROM email address, choose Add to Contacts from the menu, find the contact stored in the exchange contact folder instead of the contact folder for the POP account (the folder
that Outlook USED to save to prior to adding the exchange account).
Work around: (annoying the first few times, mentally unhealthy after more than a few) Save the contact, then manually move it to the correct folder.

Hi,
What version of Outlook are you using?
I have test this in Outlook 2010/ Windows 7.
If set POP as default outlook data file(.pst),
Open a message in the POP email, and right click "Add to Contact" in FROM with External email address, it will save to POP contact folder.
If the Email address end with @Exchange.com, it always save to Exchange contact folder, no matter what is default email account, maybe this behavior by default.
Hope this helps.
William Zhou
TechNet Community Support

Saved contacts disappear from new iphone

Saved contacts disappear from new iphone , might be the reason that same apple id used for 2 phones , we need to have solution

i had this problem on my aunt icloud
now she is blaming me
A-K contact all missing
remaining contact is K-Z
seem icloud not that reliable
she will knock my head off if i cant restore his contact,
i try login to icloud.com it also show her contact is half less then she type in
my aunt is a 60yo woman, hope icloud can restore her contact

Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts?

Started a similar string before. When I select a recipient in Messages on my Macbook Pro the name shows up in red and says the recipient is no longer registered on iMessage. I know that they are registered. Is there a problem with Contacts possibly. The previous help has been appreciated but the problem persists.

Hi,
Try iMessaging your own iPhone and see if your account is actually logged in.
It can appear "enabled" and On line but sometimes it is not.
Also try sending from your iPhone (number) to your Apple ID and see if it gets to the Mac.
If it does not use the Sign Out button.
Then shut down the Mac
On restart add back the Apple ID to the iMessages account settings.
I also just checked My wife's iPhone as she popped up red.
It turned out her iPhone did not have Messages On.
10:00 pm Tuesday; January 28, 2014
 iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Problem Saving Gererating GIF Image

Hello, we are having a problem in production environment when try to right mouse and select Print on an mii grid. Works just fine in all of our non-production environments. Checked the System Security pull downs and they all matched non-prod. Was not sure which one to compare, was not a ImageStorageServlet on pull down menu.
After right mouse and select Print on grid, get:
-Java Applet Window popup message - Problem Saving Gererating GIF Image
-Then - blank browser page - .../XMII/ImageStorageServlet/View/null
- Non-production servers works fine produces grid on browser page - XMII/ImageStorageServlet/View/2084280301
NetWeaver Log:
Location - com.sap.xmii.servlet.ImageStorageServlet
Full Message Text
ImageStorage - Error saving GIF file
Full Message Text
ImageStorage - Error generating GIF output
Any help would be appreciated.
Thanks

David,
Have you put in a support ticket for this? I recommend doing so since its occurring in your production environment. You should also attach your log files as well.
Regards,
Kevin

Unable to open external list : Error : Unable to render the data. If the problem persists, contact your web server administrator.

Hi,
Please note we are using SQL Server 2008 for sharepoint. Does it matter for this issue?
Please help.
Thanks.

Hi,
According to your post, my understanding is that you failed to open external list.
Please change the External Content’s connection properties’ Authentication Mode to BDC identity.
Then launch the SharePoint 2013 Management Shell and run the PowerShell commands to remove the error.
Here is a similar thread for your reference:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/69d937e6-f4a3-40e0-b57f-67cddb4ed12e/sharepoint-2013-unable-to-render-the-data-if-the-problem-persists-contact-your-web-server?forum=sharepointcustomization
Best Regards,
Linda Li
Linda Li
TechNet Community Support

The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailabl. If this problem persists, contact your network administrator.

Hi,
When the page is submitted for approval by using SharePoint OOTB Page Approval Workflow, it takes quite long time and prompt error message as below.
"The form cannot be submitted to the Web server either because your computer is offline or because the host server is currently unavailable.
If this problem persists, contact your network administrator."
It only happens in Internet Explorer version 8 and 9. IE version below 8 is not used in environment.
But it is working in Firefox.
Please help me on how to fix this issue.
Thanks.

Hi Htet,
Here are some articles with the same issue message, you can check the setting of Link Translation rule in the ISA from below.
http://sharepointontop.blogspot.com/2012/06/form-cannot-be-submitted-to-web-server.html
http://bytelab.blogspot.com/2008/03/problem-submitting-infopath-forms-using.html
http://social.msdn.microsoft.com/forums/en-IE/sharepointcustomizationprevious/thread/84be34b3-b806-49ce-a5c2-b5ad8a1ff09f
Thanks
Daniel Yang
TechNet Community Support

Error in Remote Web Access - "An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server."

I have set up the RWA and I can log in to the web console with my server account. However when I click on any of the shared folders I get this error:
An unexpected error occurred. Please try again. If the problem continues, contact the person who manages your server.
Does anyone know how to troubleshoot this?
Regards,
Maciek

I had this very same issue with one of our customer's servers that was running Windows Server Essentials. I ended up calling Microsoft about the issue. I hope this helps someone. This originally appeared on my blog: http://techspeeder.com/2014/01/14/remote-web-access-error-an-unexpected-error-occurred/
Troubleshooting Steps:
1. We were getting unexpected errors while accessing shared folders remotely
2. The tech found IIS handlers were missing
3. She went to IIS > server level ( parent level) and added managed handler mapping :
Name: svc-Integrated-4.0
Request path: *.svc
Executable: System.ServiceModel.Activation.ServiceHttpHandlerFactory, System.ServiceModel.Activation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
4. Added script mapping:
Name: svc-ISAPI-4.0_64bit
Request path: *.svc
Executable: windir%\Microsoft.NET\Framework64\v4.0.30319\aspnet_isapi.dll
Name: svc-ISAPI-4.0_32bit
Request path: *.svc
Executable: windir%\Microsoft.NET\Framework32\v4.0.30319\aspnet_isapi.dll
5. Ran IISreset.
6. We were able to access resources in Remote access, then.

Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.

Hi All
We are creating POs from interface program "Import Standard Purchase Order Program". Only for few of the POs, we are encountering the error 'Warning: An error occurred during tax calculation
. Please correct the problem or contact your system administrator.'
This error is happening for few PO's, other POs with same vendor, ship to and bill to location created successfully by the program
Any inputs on how to resolve this error is greatly appreciated.
Regards,
Brajesh

Hi Hussein,
Thank for the prompt response.
We have already applied the patch related to doc 1272684.1.
Below are the environment detail.
Database: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Application : 12.1.3
Diagnostic tool output :-
INTERFACE_
TRANSACTION_ID
INTERFACE_TYPE
COLUMN_NAME
PROCESSING_DATE
TABLE_NAME
ERROR_MESSAGE_NAME
ERROR_MESSAGE
100148
PO_DOCS_OPEN_INTERFACE
09-Aug-2013
PO_HEADERS_INTERFACE
PO_PDOI_TAX_CALCULATION_ERR
Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.
Log file :-
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POXPOPDOI module: Import Standard Purchase Orders
+---------------------------------------------------------------------------+
Current system time is 09-AUG-2013 21:09:04
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
STANDARD
N
INCOMPLETE
12805
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 12076063
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
69
+------------- 1) PRINT   -------------+
Printing output file.
               Request ID : 55116524
         Number of copies : 0
                  Printer : noprint
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 09-AUG-2013 22:27:42
+---------------------------------------------------------------------------+
Brajesh

An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)

Hi,
When i open my Password Reset portal then provide Username credentials in text box and click on next then asked the Securites Question Answers to me,i provide the correct Answers to the securites Question after this password reset portal asked
me New Password and Confirm Password then click on next for resetting the password then gives below Error only for 2 Users. and all other users are working fine.
An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000:)
Regards
Anil Kumar

Anything in the event log?

Sharepoint ONLINE - Unable to render the data. If the problem persists, contact your web server administrator

Hi,
I have followed the steps in the following link:
Make an External List from a SQL Azure table with Business Connectivity Services and Secure Store, but I keep receiving the following message when I try to access an external list:
"Unable to render the data. If the problem persists, contact your web server administrator"
Note: I'm using SharePoint 2013 ONLINE, and (as far as I know) I have no access to the logs & powershell.
Any body has had the same issue before?
Regards.
Note: I have tried changing my ECT's connection property (through designer 2013) to BDC Identity, but I keep receiving the following error message:
The metadata object that has Name "xxxx" has a Property with name "AuthenticationMode" and value "RevertToSelf". This value indicates that the runtime should revert to the identity of the application pool, but reverting to the
application pool is not permitted for partitioned service applications.
Saeed Fattahi .NET Specialist

Try changing the External Content’s connection
properties’ Authentication Mode to BDC identity. You will most like get an error (which I have shown below)
Below is an error you will received. Read through
the error carefully.
Launch the SharePoint 2013 Management Shell
and run the below commands
$bcsServiceApp = Get-SPServiceApplication
| where {$_ -match "Business Data Connectivity Service"}
$bcsServiceApp.RevertToSelfAllowed
= $true;
$bcsServiceApp.Update();
This Solved the problem for me. you can try
Sharepoint | TechCenter franklin

Problems saving contacts

Similar Messages

Maybe you are looking for