Problems setting up HH3 to Belkin N1 via TP-Link T...

I am setting up a wireless set up in an out building by running the HH3 via a TP-Link TL-PA211KIT to a Belkin N1.
All goes to plan but the Belkin is very intermittent and is not reliable. I have had a look at allot of advice for setting up the Belkin am still having trouble.
Forgettig about that im using a Belkin, What would people suggest in this scenario? Static IP's? PPPoE?
Has anyone else tried setting up something similar? If you don't have any specific advice what other wifi router would you recommend?
The building is about 50 meters away and have tried wifi extenders (netgear wn3000rp) but there are so many walls the signal doesn't get through! Luckily it is on the main house circuit, hence the tplink set up.
Thanks in advance!

Scottyqt wrote:
Thanks for that Keith. I have seen in another post from you (
http://community.bt.com/t5/Other-BB-Queries/Extending-Wireless-Range-of-Home-Hubs-Information/m-p/36... about using TP Link WA701ND to similar effect.
Does the TP Link WA701ND support roaming between the two? I have no problem purchasing this one if you feel it would help.
Thanks,
Only if you use it as a Universal Wireless Repeater, which in your case, would probably not work.
The problem is with the HH3 and not what is connected on the end. Its seems to be a problem with just one version of the HH3.
The HH3 will not accept a wireless connection from a device who`s MAC address has already been registered on the LAN side.
Which is the case when you have an access point connected at the far end.
There has been some success using two different HH3s.
See
Link BT Home Hub 3a and 3b together and extend your wireless to another location.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

When opening FF via a link, the window doesn't open maximized

If I start Firefox with a shortcut I have no problems, but if the browser isn't already opened, and I click a link in IRC, email etc. the browser starts in a window instead.
Simply maximizing the window and then closing the browser doesn't fix it, since it only seem to remember the window position and size as long as it's not maximized.
Going into properties of the shortcut and setting it to start maximized (it already is) doesn't change anything, since as I said, the problem is only when opening the browser via a link and not a shortcut.

That's normal behavior for Windows, I think.
It's possible there is an add-on to address this specific issue. If not, I wonder whether someone could craft a GreaseMonkey userscript that would be able to ''intelligently'' address this situation (i.e., it has to work on any site, but only if it's the only page open).

Problems Setting Up Developer Users

I am having a problem setting up developer users and I am trying to determine if I am missing a step or if there is a configuration problem on my staging and production systems.
What I want to do should be very simple. I want to create a user that can create an application and see the information under the "Application" tab in the Navigator.
I have created the user using the following steps on 3.0.9.82 for Unix:
1. Create the user
2. Make the user a full administrator (rather than end user)
3. Make the user a member of the portal_developers group
4. Make the user's default group the portal_developers group
However, when I do this the user does not see the information under the
"Application" tab. The only way I can get the user to see the info under the
"Application" tab is to make him a member of the Portal_administrators
and/or DBA group. Both my staging and production boxes have the same result.
Does anyone have any thoughts or suggestions on what might be happening?

Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls

Problems Setting up my wireless network with an Xb...

Hi, I have had some problems setting up my wireless networking.
I have everything switched on and am able to go online with the laptop and the Xbox with no problems but when I try to share media with the xbox I have problems.
I have opened the ports specified in the setup from xbox on windows firewall and have no problem connection Via Ethernet cable but when using wireless the xbox cannot detect the laptop.
I have checked the network map and both xbox and laptop are connected and have enabled sharing and am running sharing software.
Below is the network map.
I have also been having problems with BT software, the free virus protection will not install, The desktop help will not launch although it shows up on task manager and the installation disk does not launch correctly it doesn't get past the loading screen.
I have had a printer on the wireless network and had no problems printing.
If anyone knows how to resolve this please help.

I have this same Motorola modem and I just verified that my 802.11n AirPort Express Base Station (AXn) can get Internet access with this modem without any issues.
When changing ISPs (or networking equipment) it's always a good idea to start from "scratch" in configuring your equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Power-up the modem; wait at least 10-15 minutes.
Power-up the base station; wait at least 5-10 minutes.
Power-up your computer(s).
In this basic configuration, computers connected to the base station, either by wire or wireless (as appropriate for the base station type), should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options.

Problems Setting up NFS

Hi.
I've been having problems setting up NFS on a LAN at home. I've read through all the Arch NFS-related threads and looked at (and tried some of) the suggestions, but without success.
What I'm trying to do is set up an NFS share on a wireless laptop to copy one user's files from the laptop to a wired workstation. The laptop is running Libranet 2.8.1. The workstation is running Arch Linux with the most up-to-date (as of today) software, including NFS.
I have the portmap, nfslock, and nfsd daemons running via rc.conf, set to run in that order.
I've re-installed nfs-utils and set up hosts.deny as follows:
# /etc/hosts.deny
ALL: ALL
# End of file
and hosts.allow as follows:
# /etc/hosts.allow
ALL: 192.168.0.0/255.255.255.0
ALL: LOCAL
# End of file
In other words, I want to allow access on the machine to anything running locally or on the LAN.
I have the shared directories successfully exported from the laptop (192.168.0.3), but I have not been able to mount the exported directories on the workstation (192.168.0.2).
The mount command I'm using at the workstation:
mount -t nfs -o rsize=8192,wsize=8192 192.168.0.3:/exports /exports
There is an /exports directory on both machines at root with root permissions. There is an /etc/exports file on the NFS server machine that gives asynchronous read/write permissions to 192.168.0.2 for the /exports directory.
I receive the following message:
mount: RPC: Program not registered
This appears to be a hosts.allow/hosts.deny type problem, but I can't figure out what I need to do to make RPC work properly.
Some additional information, just in case it's helpful:
This is the result if running rpcinfo:
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32790 status
100024 1 tcp 32835 status
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100021 1 udp 32801 nlockmgr
100021 3 udp 32801 nlockmgr
100021 4 udp 32801 nlockmgr
100021 1 tcp 32849 nlockmgr
100021 3 tcp 32849 nlockmgr
100021 4 tcp 32849 nlockmgr
100005 3 udp 623 mountd
100005 3 tcp 626 mountd
Running ps shows that the following processes are running:
portmap
rpc.statd
nfsd
lockd
rpciod
rpc.mountd
Thanks for any help here!
Regards,
Win

Hi ravster.
Thanks for the suggestions. I had read the Arch NFS HowTo and did as you suggested get rcpinfo for the server machine. The Libranet NFS server is configured rather different since the NFS daemons are built into the default kernel.
Since I needed to complete the transfer immediately, I gave up for now trying to set up NFS and used netcat (!) instead to transfer the files from the Libranet laptop to the Arch workstation. The laptop will be converted to Arch Linux soon so I think I'll be able to clear things up soon. I haven't had any problems setting up NFS with homogeneous (i.e., all Arch or all Libranet) computer combinations.
Thanks again.
Win

Problems Setting up a Direct Debit

has anyone experienced any problems setting up a direct debit ??
I've been a BT customer for approximately 20 years and have had the same account number. I've moved house a few times and retained the same account. My last house move wasn't so successful as after moving in and having broadband re set up again... I received a letter in the post saying I had requested a "termination" and a parcel was included to send my router back etc... plus... I'd be charged £100+ for the disconnection...
Anyway I got on the phone to BT and the advisor appologised for the mix up... and suggested I cancel my direct debit with the bank to make sure the disconnection fee wasn't taken from my account.....
Ever since then... I have not being able to set up a direct debit online or by speaking with several BT helpdesk staff. I email BT asking for an explaination - NOTHING. BT helpdesk staff assure me that the direct debit will work this time and will contact me if there is a problem... again NOTHING. I even tried writing a letter to the head of customer services... I think the name Warren Buckley rings a bell.. Someone did email me back suggesting I use the online facility.... REALLY!! Do BT not have a fault tracking database of customer issues... so they can see I've already tried to set up the direct debit online...
Anyway ..... I've just noticed this forum now... so this is my latest attempt to see if anyone senior enough at BT will be embarrassed and try and sort out my account so I can start paying my bill using Direct Debit again... I'm pretty sure all that needs to happen is to be given a new account number or an account alias that can be sent to my bank. Otherwise... I'll just carry on waiting to receive the automated message from BT saying I haven't paid and then go and pay online... But I am worried one of these automated messages will arrive the day I go on a 2 week holiday and I find myself cut off when I get home... giving me more pain....
PLEASE HELP BT ;o)
regards
DaveB

I have asked a moderator to provide assistance, they will post an invite on this thread.
They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
Once you get a reply, if you click on their name, you will see a screen like this. Click on the link as shown below.
Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
They will respond either by phone or e-mail within 5-6 working days.
Please use the tracked e-mail, to reply, not via the forum. Thanks
This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
When you submit the form, you will receive an enquiry number, so please keep a note of it
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problems setting up a Domain - javax.management.InstanceNotFoundException

I am having problems setting up a Domain. The following steps summarize
what I have done.
1. Created FooDomain in d:/bea/wlserver6.0/config and created
appropriate config.xml, startup scripts, security, etc... (FooDomain
boots ok)
2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
3. Connected to FooDomain via console (works ok).
4. Defined machine FooMachine (happens to be localhost)
5. Defined new server FooServer (in addition to default myserver) and
assigned it to FooMachine.
6. Created a new directory d:/managedServers/FooServer (note - outside
installation directory)
7. Created directories d:/managedServers/FooServer/logs &
d:/managedServers/FooServer/applications
8. Copied sample startManagedServer.cmd from mydomain to
d:/managedServers/FooServer & modified appropriately.
9. Ran startManagedServer.cmd (Note: I was able to connect to the
Administration Server ok)
The problems are as follows. (From the console - pointing to the
Administration Server for the FooDomain)
1. I am unable to configure a DefaultWebApp_FooServer to be located at
d:/managedServers/FooServer/applications. I get the following exeption:
javax.management.InstanceNotFoundException:
FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
2. I get a similar error when trying to set FooServer log locations to
d:/managedServers/FooServer/logs
Any ideas as to why? This then begs the question, what if FooServer was
on a different physical server altogether. How would I define the
location of the DefaultWebApp and logs.
Thanks
jay ()

If you want your application work, think my way. At least, all my teammates have used this method to build their development environment. If you are more interested to debug for Weblogic, contact your support representative. The tools from Administration console look very nice, but not function as you want (e.g., the tool to convert version 5.1 application to version 6, even monitor tools). Administration console is very nice to be used to configue the parameters for a domain, but not so trustful and not for application setup in my own experience and that is why I suggest you use mydomain and DefaultWebApp_MyServer as templates. By the way, I did modify config.xml manually to change the default web application entry, etc, to what I want.
Jay Zammit <[email protected]> wrote:
I did not modify config.xml manually. In fact, I am able to boot both the Administration Server & Managed Server. The problem happens when using the Administration console to assign my logs and Default Applications directory to the d:/managedServers/FooServer/logs, and d:/managedServers/FooServer/applications/DefaultWebApp_FooServer directories. Try it yourself. Go to the Configurer WebApp option and type in a fully qualified directory such as d:/managedServers/FooServer/applications/DefaultWebApp_FooServer
and see if it works on your system.
thanks
jay ()
Xiang Rao wrote:
One suggestion. Use the default domain mydomain as a template. Just make a copy of "mydomain" in folder config and rename the copy to whatever you like. Use some help tools to search all files (non-binary files) in new domain for key word "mydomain" and replace these words with your new domain name. To build an application, just rename the DefaultWebApp_MyServer to what you like and search "DefaultWebApp_MyServer" in all files (non-binary files) in your new domain and replace these words with yournew application name. Note you need to modify the scripts accordingly. Then you can run "startWeblogic" in your new domain directory to start your new domain. Other parameters should be configured by Administration console. If you manually modify configuration files, you could expect some bad news without reason.
Jay Zammit <[email protected]> wrote:
I am having problems setting up a Domain. The following steps summarize
what I have done.
1. Created FooDomain in d:/bea/wlserver6.0/config and created
appropriate config.xml, startup scripts, security, etc... (FooDomain
boots ok)
2. Moved console.war to bea/wlserver6.0/config/FooDomain/applications
3. Connected to FooDomain via console (works ok).
4. Defined machine FooMachine (happens to be localhost)
5. Defined new server FooServer (in addition to default myserver) and
assigned it to FooMachine.
6. Created a new directory d:/managedServers/FooServer (note - outside
installation directory)
7. Created directories d:/managedServers/FooServer/logs &
d:/managedServers/FooServer/applications
8. Copied sample startManagedServer.cmd from mydomain to
d:/managedServers/FooServer & modified appropriately.
9. Ran startManagedServer.cmd (Note: I was able to connect to the
Administration Server ok)
The problems are as follows. (From the console - pointing to the
Administration Server for the FooDomain)
1. I am unable to configure a DefaultWebApp_FooServer to be located at
d:/managedServers/FooServer/applications. I get the following exeption:
javax.management.InstanceNotFoundException:
FooDomain:Name=DefaultWebApp_FooServer,Type=WebAppComponent.
2. I get a similar error when trying to set FooServer log locations to
d:/managedServers/FooServer/logs
Any ideas as to why? This then begs the question, what if FooServer was
on a different physical server altogether. How would I define the
location of the DefaultWebApp and logs.
Thanks
jay ()

Problems setting up WRT54G2 router

I'm having problems setting up my Linksys WRT54G2 router. I want my mac laptop (iBook G3 running OSX) to use a wireless connection, and the home computer (running Windows XP) to stay connected to the modem.
I originally tried to set up the router by connecting it via ethernet to my laptop (and by ethernet to the modem), and went into the 192.168.1.1 address to configure it. The internet works fine on my laptop when connected to the wireless by ethernet but it can't connect wirelessly (it has an original airport card fitted, at first I thought I might need to upgrade the firmware but I ran a software update and one didn't come up). I then realised that I would need to MAC clone from the PC, that is connected to the modem? I tried to do this today, but I couldn't access the 192.168.1.1 address from the PC. I have tried resetting the router, and disabling the firewall but still can't access it. This PC also has anti-virus software running too - could this be the problem, or am I setting it up wrong? Thanks.

If you are trying to Setup your Router with the setup disk, Then you can exit from the setup and configure your Router manually. Before you configure your router, you need to Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 60 seconds and re-connect the power cable.....
You need to connect your Modem to Linksys Router on Internet Port and your Computer to Linksys Router on Port No.1.
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link
Here are the Wireless Settings which you can set on your router, once done you can try connecting your MAC computer to your Wireless network and check if you are Online from MAC computer.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
-Here select manual configuration...Wireless Network mode should be mixed...
-Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Wide-40MHz and change the Wide channel to 9 and Standard Channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on save settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select AES...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2307 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Problems setting up dual monitors

I am having problems setting up dual monitors on a band new HP envy 700 using windows 8. I just bought this computer and bought DVI to via adapters to use. Everything is hooked up but nothing is happening on the 2nd monitor. Help!

Jaimetech3, welcome to the forum.
When requesting help you should always include the make/model (i.e. p6-xxxx) of the computer and/or monitor. This information is necessary for us to review the specifications of them.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

PROBLEMS SETTING UP EMAILS AS DEVICE REFUSES TO RECOGNISE PASSWORD AND/OR USER NAME

PROBLEMS SETTING UP EMAILS AS DEVICE REFUSES TO RECOGNISE PASSWORD AND/OR USER NAME
My 9800 ( I have 2 - one spare ) is driving me nuts- will not let me set up email accounts from my other Curve model.
Repeatedly told that either user name or details are wrong, yet they are RIGHT on website.
Exasperated
Help please??
Fair winds and kind landfalls

Thank you- I have read through that thread and can see some resonance with my issue.
My AOL emails work VERY fast with BB, in fact almost simultaneously received on PC & Torch " ping ping!"
This issue only raised its ugly head when I had 2 Torches replaced by my insurers.
Whilst the claim was in process I used a new Curve, loaded from backup on PC to keep emails going and of course phone & web facilities. ( I use the BB to power internet via bluetooth to my PC / laptop when living on a remote island with no phone lines or power supplies) All was fine. Swapping email accounts took a few minutes with the usual password confirmations for each AOL screenname etc.
Then the new Torches came back from insurers, and I tried to swap devices. Phoning & texting is fine. Al data and contacts swap over fine.
SETUP email accounts.............stymied every time. It says repeatedly that my user name/password is invalid etc etc etc
Have tried security wipes. Have tried setting up new BB ID & passwords on PC website. All is OK until I try to setup emails on the Torches. This has used up ridiculous amounts of time- all wasted.
I love the BB phones and the fast email push......in fact I recently bought a new Sony Xperia Z1 but sent it back because of wifi coverage meant no emails on that superb phone for lots of the time.
Good old BB I said..........I always get emails wherever I am. ( Rural Scotland has very patchy radio & wifi coverage)
Was about to purchase new Z10s just to get a bigger screen, but now I am averse to buying ANY BB phone again because this present mess means I may never get emails set up again. How nuts is that?
Many thanks for all help & suggestions..........boy do I need them!!
Kind wishes from West of Scotland
Fair winds and kind landfalls

I have problem setting up a new wireless keyboard and my new Mac mini

I have problem setting up a new wireless keyboard and my new Mac mini

Same with my new mac mini.
Got it brand new via the online shop.
Happy to start with the new mac i really got dissapointed by the fact that it`s impossible to pair the wireless keyboard unless you first connect a USB keyboard to the mac mini and start the configuration.
THIS S.U.C.K.S. !!!
No hint at all from apple that you first have to connect the USB keyboard.
I had to borrowed a USB keyboard from my neighbour :-((
After setting things up it was no problem at all to establish the BT connection with the keyboard.
Works fine now.

Problem setting up RAID0 on ASUS p9x79Pro

I’m having problems setting up a RAID0 on my new p9x79pro build, and I think I’m following the right procedure, first time doing this and it’s not working, so I could really use some help.
I pre-installed the Intel drivers downloaded from ASUS prior to installing Windows 7 using the f6 method.
After installing, I ran the Intel rapid storage enterprise installer software, and the raid controller shows up in Device Manager.
I then followed the procedure in my mobo manual. I went into the bios, into advanced mode, changed my drives from ACHI to RAID mode, and then went into Ctrl I mode and tried to set up a raid. The two new WD 1 TB black caviars I have were visible, but greyed out and described as “non-raid disks”. When I went through the process, they remained greyed out, and I could not select any drives to raid, though I tried creating a RAID0 anyway.
These drives, both new, had already been partitioned. These drives are plugged into the top two sata 6gb ports on the mobo, which should be correct according to the manual.
When I rebooted, my drives were not visible, and as expected, there was no RAID0. I went back into BIOS, deleted the (nonexistent) raid, and reset the drives to ACHI, but the drives still did not show up.
So, thinking I screwed up somehow, I did a full reinstall of windows. After installing the Intel enterprise installer software, I went into device manager and the drives were back, but unpartioned. Before partitioning, I tried to RAID0 these again, using the above method, but no luck, still greyed out. I also made sure to let windows connect online to download any hotfixes, which it did. All my other drivers are up to date, as is BIOS. Before I partition these drives and try again, figured I’d ask here.
I think I’d be there, if only the drives were not greyed out. What am I doing wrong?
Also, if I were plugged into the bottom two drives (the Marvell controller, which show up in Device Manger, so it appears to have installed) how would I set up a RAID0?
Thanks

Something is off as the Intel SATA6G ports fully support raid. I would consider doing a write zeros on your drives and and retry creating on the Intel ports.
I complete a quick check on a P9X79 Pro without issues screen below for your reference.
Steps used ( already had OS install on single SSD ). Completed using UEFI defaults ( drive was installed under AHCI ).
Step 1. Connected 2 SSDs to the Intel SATA6G ports white ports not label SSD Caching ( which are the Marvell ports )
Step 2. Entered into the UEFI and changed to Raid
Step 3. Saved and reboot and entered into Raid Console ( Ctrl I ), Once enter created Raid 0 and defined 2 Corsair drives as drives to be used in Raid
Step 4. Rebooted and entered OS and install RST driver/application.
Included some screenshots including performance throughput of 2 SSDs on SATA6G ports which can only be achevied via Raid0 on Intel SATA6G ports.
One thing that was not clear is where is your OS present / installed and on which port?
Hopefully you will be able to get this sorted and resolved. Then again if you are ok running the Raid on the Marvell ports you are already solid.
Enjoy the rest of your day.

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

Setting up two computers to print via wireless

I'm trying to set up a second computer to print to my HP B209a-m printer. The computer and the printer were linked by a USB cable. The program attempted to set up the wi-fi connection and failed repeatedly. The SSID name and password were correct. Is there a problem setting up two computers via wi-fi. I've printed both from my Android phone and from my HP Touchpad (WebOS version) with no problem. Physically, the computer, router and printer were all right next to each other.

Hi snwyn,
I understand that you are having a problem setting up the printer wireless on a second computer. I will try my best to help you resolve this issue.
To better assist you, could you give me some more information.
1. What operating system are you running on your computer?
2. What error messages are you getting when you try to install?
I am sending this document for The Printer is Not Found During Wireless Network Installation in Windows that has steps that may resolve your issue.
I hope this helps, let me know.
Thank you,
I worked on behalf of HP.

Having problems setting up iMessage

I'm having problems setting up iMessage on my iPod Touch. I have several iphones and they all were configured out problems. But I'm having difficulty getting this to work on an iPod touch.
The iPod touch has been upgraded to the latest iOS 5.01 from iOS 5.0 and I still have problems...
I have a valid iCloud account
iCloud is setup and working fine on this iPod touch
I've shut-down and restarted the iPod touch
I've done a hard-reset
Wifi is setup properly...
Here's the issue:
I open iMessage (either through the Messages app, or via Settings/Messages
I'm asked to enter the Apple ID. So I enter my Apple ID and password
I click "Sign In"
The app moves to the next screen - "People will message you using your email address. What email address would you like to use?". I enter the same gmail address I'm using for my Apple ID
I click the Next button and it scrolls back to the original "Enter Apple ID" sign in screen in Step#2. No error message appears.
So I don't really know what to try next..

OK - solved my own issue finally.
The answer was buried in another thread within a reply from user fdm1979.
The time on this particular iPod was wrong...just flip the Date/Time to "Set Automatically", and then suddently imessage and FaceTime started working.

Problems setting up HH3 to Belkin N1 via TP-Link T...

Similar Messages

Maybe you are looking for