Problems using the Program Monitor
Dear Premiere users,
I recently bought Adobe Premiere CS3 and i'm having problems using the Program Monitor.
I cant see anything off screen. It just wont show anything if its outside the boundaries of the screen. I can adjust the zoom level but that wont change anything even if i set it to full screen.
Another problem I'm having is that it wont show motion paths or clip handles. Even if I make a motion path in the Effects Control window it wont show the path in the Program Monitor.
I really appreciate any advice on this because it drives me crazy. I already tried installing it again but that wont solve the problem.
Thanks in advance.
Greetings,
Peter
First of all I hope you are being sarcastic Jim. Sorry for being not that clear but I'm not stupid :).
Craig Howard is right. I thought that the Program Monitor was similarly to AEFX. But I suppose I was wrong on this one? So you cant get something to display outside the image area? If I place a clip outside the project dimension it just disappears in the Program Monitor.
And about the motion paths. I thought I read in the Premiere help files that they do show up in the Program Monitor. The topic says: "Adjust position, scale, and rotation" or "Animate motion in the Program Monitor ". There are pictures over there that show clip handles and motion paths in the Program Monitor. Clicking the effect wont do anything for me. Its like my video driver cant get them to show or something.
Edit: I found a tutorial here:
http://digitalproducer.digitalmedianet.com/articles/viewarticle.jsp?id=26660&afterinter=tr ue
They are dragging frames off screen and are using the handles and borders around the frame to adjust them. So I guess it should be possible, but how?
Thanks for the help.
Similar Messages
-
when i first inst Photoshop cs6 i was able to see the 3D icon, but on the next time i used the program there is no more 3D icon. when i launch Photoshop it say " Photoshop detected graphic hardware is not officially supported if you experience problem please unchecked the use graphic processor check box in the performance panel of the preference dialog" Is this the cause? If so how to uncheck that box? Thanks
Your video card is underpowered for the task.
Go to Photoshop > Preferences > Performance and click on the tick mark next to the box labeled "Use Graphics Processor": -
SS2 - Problems Changing to this using the Program ...
Just an annoying little bug, if I change to this channel (42) using the Program button on the remote it quite often greets me with the "Insert Viewing Card" message. However if I key the channel directly using the numbers it works OK every time - anyone else come across this?
Solved!
Go to Solution.May be this: http://bt.custhelp.com/app/answers/detail/a_id/14255/session/L3NpZC9XQUR0bWk3aw==/c/348
-
Lines and title flashing across the program monitor and in final export
I'm seeing very thin lines flashing across the program monitor when playing a complex sequence with 7 video tracks. They draw at various angles and span the entire screen. There can be one or more showing at any time. They are colored and each line appears to be only one color, but different lines can be different colors. Some lines are solid, others are dashed. There is also a ghosty-white representation of one of my titles flashing around the screen for only a frame or two, then it flashes somewhere else.
Sequences and Tracks:
Base Sequence: AVCHD with disolves and color correction
Next Sequence Layer: Base Sequence placed on tracks 1 and 2. Motion is applied to both tracks. LInearWipe and Opacity are applied to Track 2.
(This creates an image in the center of the screen with a reflection.)
Next Sequence Layer (1st track of the final 7): Animates Basic3D and Motion (position, scaling)
2nd, 3rd and 4th of the seven are just like the1st. So there are 4 video screens flying around with reflections and perspective. Kind of like the iTunes album art widget - screen flies in, goes center stage, then flies back.
Layers 5 to 7 are titles. They are also nested sequences having reflections and Basic3D, but their positions are not animated.
My system:
Phenom II x6 1055T
8 Gb DDR3 1333
3 Drives 7200 rpm (one program, one preview/conforming, one video)
nVidia GeForce GTX 260 (3 fans attached)
3 Case fans plus the side is open - running very cool
MSI 890GXM-G65 Mobo
My Project:
Originated as a CS4 project, opened with CS5 and converted (did not import). Fixed all the title screwups, missing fonts, graphics, hooked up the off-line media etc etc. There are a couple of 1.5 hour nested AVCHD multi-camera sequences which look and play great. Then there are 2 of these monster sequences which are actually used as DVD menus and are about 44 seconds each. When I render these 7 layer menu sequences and play them back, these lines start flashing across the screen.
Of course the GTX 260 has the GPU unlocked and that works great for the 1.5 hour programs. But if I attempt to render the 44 second monsters Premier stops responding and I have to EndTask it (all CPUs drop to idle while not responding). These monster sequences might test the power of the Quadro CX. So when I work with the menu sequences, I set Premiere to use software GPU and not MPE. Then I can render (2 hours render time to preview 44 seconds with six cores at near 100%). So it does render, slowly.
I'm exporting an mpeg2 file now and will let you know if the lines show up in the final rendering. I can see the lines showing up on the MediaEncoder's small preview screen as it renders. Doesn't give me comfort.
OK worst case scenario. The lines ARE in the final mpeg2 file. Makes the file unusable garbage...
Is anyone else seeing flashing lines and titles?
Here's a link to a still from the export to illustrate the artifacts.(face and name were blanked out by me)
http://img23.imageshack.us/img23/5051/premierecs5lineandtitle.jpg
ThanksThe crop workaround was successful for removing the lines - worked great. There was the issue of the ghost text which you can see in the screenshot link provided above. This was not removed by crop. Crop removed the lines, but not the ghost. Thankfully, the 4 point garbage mask did work on the ghost and I was able to eliminate it. I had to apply the garbage mask on the sequence where Basic3D was applied not its parent sequence where VerticalFlip was used. The most important thing is that I've successfully migrated this CS4 project to CS5 and can now take advantage of 64bit processing (more RAM) to tame the beast. I'm using this sequence as a menu for a series of DVDs so my time expended will pay me back again and again.
The asset generating the ghost was built like this...
In the titler: Text was placed over a logo (.tiff file for logo and it was scaled and moved)
Base Sequence: Title was brought to two, stacked tracks. VerticalFlip, and LinearWipe were applied to one which was then moved to look like a reflection of the other
Next Sequence: Layed the Base Sequence down. Applied Basic 3D and moved it's XY position. (This is where I applied the GarbageMask to remove the ghost)
I tried separating the logo from the text thinking that the logo feature of the titler might be the problem. So I used a separate video track and pulled in the .tiff file directly. It didn't eliminate the ghost. Applying the GarbageMask to the base sequence also didn't help. It was only after Basic3D was applied that the ghost would appear. And since I have Basic3D applied to other reflected text-only layers which do not exhibit the ghost artifact, the bug has something to do with the text/graphic combination with VerticalFlip and Basic3D.
To top it all off, I can no longer recreate the problem. I've turned off the garbage mask and it's not showing up. While I was testing, the ghost was easy to recreate, but now I can't do it. So I don't appear to be able to drill down deeper. Perhaps it will come back at some point and I can test it further and update this thread. -
I am using WIndows 7 64 bit, and the most recent version of Premiere Pro CC on an I7 machine with 8GB of memory. I have imported a HD .mov clip and placed it on the timeline. When I press 'Play', it shows in the Program Monitor window. When I stop the playing, the window goes blank. I have rendered the clip (it has a yellow bar above it). Even after rendering, the yellow bar remains and the sequence only displays when it is playing. The source monitor has the same behavior.
Not being able to see where I am in a clip is making editing very difficult. I have used Premiere Elements for five years, I have taken the Lynda.com course, so I have some familiarity with the program that suggests that the frame at the point of the CTI should show in the program and source monitors.
What do I need to do to be able to see the frame in the monitors when it isn't playing?
Update: I spent 35 minutes with Tushar in a technical support chat (case number: 0186148124), during which time we deleted the contents of the Media cache folder in C:/Users/Your User Account/AppData/Roaming/Adobe/Common file (after using task manager to close coresync32.exe and creativecloud32.exe) and renamed both the Adobe folder and the 8.0 folder in Documents/Adobe/Premiere Pro/8.0. This didn't get it, but was necessary for the next step:
Going to the File menu, Project Settings, and selecting 'General Settings', Tushar had me change the Renderer to Mercury Playback Engine Software Only (I don't have a GPU accelerator video card yet). I received a warning that all previews would be deleted, which I accepted. That brought the image back to the Program Monitor.
I've posted this for anyone who may experience a similar challenge in the future. Despite a lot of Google searching before I contacted Tech Support, I didn't find anything even close to the description of the problem. I hope this provides that source for future searchers.
JeffThanks, Ann. As I mentioned in my post, Tushar correctly pointed out that, without a GPU accelerated card (which I don't have - mine is a piece of junk which I will be replacing with a compatible one soon) you must use the software only settings. I had changed my project over to the 'software only' setting, and I still had the problem. The value Tushar added was the procedure for clearing the cache.
What I did originally was a newbie error, no argument. I posted it here for others who may fall in the same hole. Your reply confirms that, without a GPU accelerated card, use the software only settings (sounds so obvious, yet I missed it.....).
Jeff -
Could not initialize photoshop because of a problem using the adobe color engine (Win 7)
Was running the lastest version of Photoshop CS5 and added a second quad graphics card and 4 more monitors. Now PS will not start and I get the error message "could not initialize photoshop because of a problem using the adobe color engine."
Computer has 2 NIVDIA Quadro4 NVS420 graphics boards with 8 Samsung SyncMaster 1920x1080 monitors. If I disable 4 of the monitors CS5 starts normally. I do not have to remove the added graphics card. When I extend the desktop again to all 8 monitors I get the error above.
How do I trouble-shoot the problem? Is it Photoshop, NIVDIA or Windows 7?Well, not exactly a full solution yet (at least for my setup), but I am certain now that this issue is (mostly) caused by nVidia's drivers. You may be able to fix your setup by simply installing the latest drivers for your NVS420 cards (266.45 for Win 7/64 rel. 01/12/2011).
Since you are using two identical cards, this could do the trick.
Caveats - Make sure you:
1. Select Custom Install, the Express Install will most likely not work properly.
2. Unselect the Audio Driver (if available), the nVidia HD(MI) Audio driver could
screw up your speech recognition (if you use it) or other audio software - it did for me.
3. Select Clean Install. If you don't, files like C:\Windows\System32\drivers\nvlddmkm.sys
and several other driver related files will not be overwritten, causing all sorts of neat effects.
4. After the Install is complete, reboot your system whether the Installer prompts you or not.
After testing various configurations, disabling two - six of my eight monitors I am at this point:
I am now using nVidia's lastest and greatest piece of crap (read driver), version 266.58, released just two days ago. After an initial snag with maximized windows extending to the bottom of the main monitor (underneath the taskbar), a re-install & reboot solved that issue.
All three driver versions tested (260.89, 260.99, 266.58) now allow me to start PhotoShop without any problems; providing I first disable the two monitors fed by my onboard graphics (nVidia 780a based), leaving me with six monitors connected to three GTS-450 cards. I can even re-enable the two other monitors once the program is open, and it continues to work fine. However, I must disconnect them again for the next start of PhotoShop.
On an interesting side note:
After disabling six monitors (leaving only two on a GTS-450), I was also able to open and run SoundBooth CS5, which previously would not open, citing the audio driver as the problem. After sucessfully starting SoundBooth I could re-enable all six other monitors (incl. onboards),
and that program now opens and works fine with all 8 monitors connected. [ODD !!!]
Other than Adobe Software, I've had only one other issue with my setup:
When playing online poker at PokerStars, occasionally and quite randomly one of multiple tables would freeze up. I'll try disabling the two onboard monitors for that program as well to see whether the random freezes stop.
Overall, while I think that Adobe produces fine software and nVidia has been in need of an overhaul for quite some time now, I also think that Adobe and nVidia software engineers need to work more closely together to ensure that problems like this don't arise in the first place after a product has been released to the public. IMHO, this is avoidable!
PS:
Here's a link to a great tool for multiple monitors, Display Fusion by Binary Fortress.
I use the free version, it allows you to do cool things like have individual wallpapers for all
your monitors, or stretch a single image across all monitors. With the Pro Version ($25),
you can also add individually customizable taskbars to each monitor, and a lot more.
http://www.displayfusion.com/ -
Photoshop CC 2014, A problem caused the program to stop working
When opening Photoshop CC 2014, I get "A problem caused the program to stop working correctly". Works fine on my home computer but the new one in the office has the error message. I have the latest cloud version of the program. I've updated the AMD/ATI display driver- first from the HP site supporting the Win 7 Pro laptop I'm working on(driver ver.13.2) and then from the AMD site (ver.14.1) I've installed all windows updates. Still get the same message followed by Photoshop closing itself out.
Has windows ever notified anyone of a solutionI think once Windows notified me of a solution (which was to update my video card driver). Most of the time you don't get a direct response, but submitting the report does give the engineers something to work with in order to try to find out what is causing the problem.
Anyway, there are about a million different things that can cause any application to return this generic error message. While you've already covered a couple of the possible solutions, there is still a ton of stuff to try. Since Photoshop is working on one computer but not the other, and knowing that Photoshop is exactly the same between both computers (assuming you are using the same version), then the question really becomes "what is different between the two computers?" Basically, shy of knowing that, we have a ton of general troubleshooting steps to give a shot at:
Troubleshoot system errors, freezes | Windows | Adobe software -
I have a new laptop with Windows 8 as operating system. Installed latest version of iTunes ontop computer. I can play music in My Library but when I click on iTunes, I get the message " iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify if a solution is available."
Anyone know what is the cause and if there is a resolution? Have tried to re-installing iTunes and have also tried restoring laptop to an earlier date.iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
http://support.apple.com/kb/ts4062
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
iTunes Store: Associating a device or computer to your Apple ID
http://support.apple.com/kb/ht4627
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
Cheers, Tom -
Whenever I connect to the iTunes store i receive an error message "iTunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." This causes iTunes to close. I am using iTunes version 10.5.0.142 on a Windows Vista (64) PC. I have reinstalled iTunes selecting the "repair" option and also uninstalled and reinstalled iTunes. Any help will be deeply appreciated. Thank you. Below is the result of the diagnositc.
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
HP-Pavilion BN474AV-ABA HPE-150t
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 002FAD94098CD0E0
Current user is not an administrator.
The current local date and time is 2011-11-13 22:08:54.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 220
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 2cb3fff3fa771d265b0f8ffdcca13b55
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {F4A2029C-16AA-4BDF-8DB7-9EC2A75B5991}
Description: Realtek PCIe GBE Family Controller
IP Address: 192.168.1.6
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun Nov 13 21:09:29 2011
Lease Expires: Mon Nov 14 21:09:29 2011
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was successful.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-13 22:02:08.
**** CD/DVD Drive Tests ****
LowerFilters: PxHlpa64 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.2.0.1),
E: hp DVD A DH16ABLH, Rev 3HD9
Data or MP3 CD in drive.
Found 1 songs on CD, playing time 15:40 on CDROM media.
Track 1, start time 00:02:00
Get drive speed succeeded.
The drive CDR speeds are: 8 16 24 32.
The drive CDRW speeds are: 8.
The drive DVDR speeds are: 8.
The drive DVDRW speeds are: 8.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: hp CDDVDW TS-H653R on CDR media at speed 24X.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA 1394 OHCI Compliant Host Controller. Device is working properly.
Connected Device Information:
Bruce's iTouch, iPod touch (2nd generation) running firmware version 4.2.1
Serial Number: 1C9053CC201
**** Device Sync Tests ****
Sync tests completed successfully.Same exact thing with me. And no help from apple. Just dropped nearly $600 and cannot get a decent working setup.
Apple's only suggestion was to uninstall iTunes and Quicktime, and re-install... of course (the I.T. Crowd tactic).
The crash happens only on iTunes store access. -
Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. How do I get iTunes to work again?
Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
http://majorgeeks.com/download.php?det=4459
Here's a screenshot showing the particular links on the page that you should be clicking:
After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
When the dialog appears, choose to save the file.
(2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Hi,
I’m getting the following error message when ever I try to start cs6 and the program gets close.
“Adobe Photoshop CS6 has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available”
Please advise what is the problem? and How to sort this out?
OS Name
Microsoft Windows 8.1 Pro
Version
6.3.9600 Build 9600
Other OS Description
Not Available
OS Manufacturer
Microsoft Corporation
System Name
JARVIS
System Manufacturer
Dell Inc.
System Model
Inspiron N5110
System Type
x64-based PC
System SKU
To be filled by O.E.M.
Processor
Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz, 2501 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date
Dell Inc. A11, 8/3/2012
SMBIOS Version
2.6
Embedded Controller Version
1.01
BIOS Mode
Legacy
BaseBoard Manufacturer
Dell Inc.
BaseBoard Model
Not Available
BaseBoard Name
Base Board
Platform Role
Mobile
Secure Boot State
Unsupported
PCR7 Configuration
Binding Not Possible
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume2
Locale
United States
Hardware Abstraction Layer
Version = "6.3.9600.17196"
User Name
Jarvis\JARVIS\Abhishek
Time Zone
India Standard Time
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
3.16 GB
Available Physical Memory
1.21 GB
Total Virtual Memory
3.72 GB
Available Virtual Memory
1.55 GB
Page File Space
576 MB
Page File
C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions
Yes
Hyper-V - Second Level Address Translation Extensions
Yes
Hyper-V - Virtualization Enabled in Firmware
Yes
Hyper-V - Data Execution Protection
Yes
Display adapters:
and NVIDIA GeForce GT 525M.Without the actual crash logs nobody can say, but chances are that your graphics hardware is to blame, so update the driver...
Mylenium -
How do I output the program monitor from Premiere Elements 13 to an external TV monitor?
I can find information about dual monitor set ups, but is it possible to output the program monitor only to an external monitor?
If so, what is needed?
I'm using PE`3 on a PC with Windows 7 64 bit with an NVIDIA Quadro NVS 290.
Thanksbobj
Have not found a way, but....
Do you have a HDMI cable and does your computer and TV each have a HDMI port.
The TImeline panel appears to be the only undockable panel in the Premiere Elements 13/13.1 Expert workspace area (Window Menu/Dual Monitor)
The best I can do is to make a HDMI connection between the HDMI ports of my computer and TV, with display at Duplicate or Extend. That does not appear to be what you seek.
The other part of all this is that Premiere Elements used to have a "Playback Settings" in Project Settings and accessed from
right clicking the Edit area monitor. That is no longer to be found in 13.1, even in a grayed out state. And, for me, the Playback Settings could not be made visible
when attaching a 3rd party device.
In the days of Premiere Elements 11, the answer to your question might have been as described in the following
Adobe Premiere Elements 11 * Previewing movies
Until proven otherwise, I am thinking that it cannot be done in Premiere Elements 13/13.1. But, I am not at a stage where I would put a never and always stamp on this.
ATR -
New laptop, load itunes to find a error message that states, "i tunes has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". It has me stuffed on such a problem that should be easy to load. Please help!!!!
Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
When i connect my iphone 3GS to my PC, while syncing in progress, pc shows backing up, preparing to sync. Then message display "itunes stopped working",
windows checking for solution, Then message comes "A problem caused the program to stop working correct. Windows will close the program and notify you if solution is available" , Then Itunes go off. I have tried agains installing Itunes etc no use. I am not a computer literate, help me to resolve this, ThanksI have already copied my photographs to the a library manager but when I tried to reuse iphoto and import the photos back into iphoto, it would not let me.
You can't "copy" your photos to the "library manager", there is just no way to any such thing.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD
Maybe you are looking for
-
TS3899 how to reset icloud account
I have put in wrong email address that doesnt exist how can i reset my icloud account
-
SOAP unable to create a socket after OS upgrade OS/400 V5R4 to V7R1
Hello, after we upgraded our OS from System i V5R4 to V7R1 we have problems with our SOAP adapters. In the runtime workbench and also in the SXMB_MONI the following error occured: SOAP: call failed: java.io.IOException: unable to create a socket Mess
-
How to make a screen field as selected when we place the cursor in the fiel
Hi, I have a requirement like, needs to be automatically select a screen field value when i place the cursor in that field. The screen field value should be displayed in blue color as like we select the value using shift-end. when a new value
-
Use of Parameters in URL iViews
I'm looking for information/documentation/examples of using parameters in URL iViews. In particular, I'm hoping that we can pick up some portal runtime info to include as parameters in the URL for a URL iView. For example, here at my customer, Koda
-
T530: an error occurred while ejecting sd-card from internal sd-reader
I can`t eject cards normaly. Error appears in 100% cases. Anyone experience such problems? Lenovo ThinkPad T530: i7-3520M/16GB RAM/128GB Vertex 4 SSD/1TB Seagate HDD + 8GB SSD Cache/NVS 5400M/FHD 1920x1080/9-cell BAT/ Backlit RU/Windows 7 Pro SP1 x64