Problems when transferring supplier from ROS to EBP...

Hi,
When we transfer the bp from BBPMAININT service, we are getting the following error.
Error when processing your request
What has happened?
The URL http://srmdev.indosat.co.id:8000/sap/bc/gui/sap/its/bbpmainint/ was not called due to an error.
Note
The following error text was processed in the system ISD : Subscreen not found
The error occurred on the application server srmdev_ISD_00 and in the work process 1 .
The termination type was: ABORT_MESSAGE_STATE
The ABAP call stack was:
SYSTEM-EXIT of program BBP_VENDOR_CREATE
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ISD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server srmdev_ISD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 1 in transaction ST11 on the application server srmdev_ISD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: MNGR_MRKT -l: E -s: ISD -i: srmdev_ISD_00 -w: 1 -d: 20070511 -t: 123323 -v: ABORT_MESSAGE_STATE -e: Subscreen not found
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
The workprocess 1 trace file is as below:
W *** ERROR => diag: Unable to find a subscreen named `_top 2@100' [w3xxsemg.cpp 2106]
W *** ERROR => diag: Could not process target, rc=0xffffffd8 [w3xxsemg.cpp 1369]
W *** ERROR => plugin: XKrnHandleResponse failed rc= -40 [itspxkrn.cpp 764]
W *** ERROR => plugin: ItspXKrn_HandleResponse failed. 0xc0000000d4ae40c0 rc: 0 [itspxkrn.cpp 389]
W *** ERROR => ipl_ConvertOut failed rc = 1, send icf error page [itsplxx.c 1551]
M ***LOG W01=> [itsplxx.c 1552]
W *** ERROR => ipl_ConvertOut returns 1(ITSPE_FAILURE) [itsplxx.c 1554]
W *** ERROR => Raise Last error:[40 from: w3xxsemg.cpp:2107] [itsplxx.c 1228]
W *** ERROR => RaiseError(sapdext) ITS_P:40 [w3xxsemg.cpp 2107]
M ***LOG R68=> ThIRollBack, roll back () [thxxhead.c 13155]
W
W Fri May 11 12:35:38 2007
W *** WARNING => diag: SemgSyncTransaction: Resync required [w3xxsemg.cpp 3131]
A
A Fri May 11 12:36:03 2007
A generated report SAPLBBP_BD_DRIVER_46A with fingerprint 75C5284EB681FCEA7CD5A56163D98C60 625063
Can anyone please help.
Thanks and Regards,
Sailesh K

Hi
Which SRM version are you using ?
What are the steps to replicate the dump in the system ?
Meanwhile, please go through the follwoing SAP OSS notes, which will help.
<u>Note 1014414 SRM 5.0 SP stack 08(03/2007) SAPKIBKT08 release/info note
Note 937013 CUF dump after enhancement of structure BUT000 in BBPMAININT
959002 Dump in SUSR_USER_CREATE_CHECKS when creating contact pers
937838 Customer fields on BBPMAININT: Dump on Vendor Data tab
864011 BBPMAININT: Cannot enter telephone number
865457 Remove bidder from auction bidder list
809632 Business partner: CALL_FUNCTION_NOT_FOUND for tax numbers
709841 Termination GETWA_NOT_ASSIGNED at tax group display (Bupa)
583965 Dump with field length exceeding in F4 selection popup
459829 BBP_VENDOR_CREATE: Dump when checking back-end mapping
Note 428179 Dump in SUSR_USER_CREATE_CHECKS (Create user, bus. partner)</u>
Do let me know.
Regards
- Atul

Similar Messages

  • Unable to trf accepted supplier from ROS to EBP

    HI
    i've this issue: i'm unable to trf accepted supplier from ROS to EBP  
    EBP and ROS (without SUS) into same client.
    I modified via SM30 table BBP_BACKEND_DEST with type system= EBP_SUS and not flagged any other field.
    But:
    Could not create business partner (see error messages)
    Business partner could not be created
    Partner data not transferred from catalog. Inform system admin.
    How can i do?
    Am i missing something?
    regards
    andrea

    Hi Andrea,
    I am facing the same issue. Could u pl help me?
    Thanks
    Nikhil

  • Transferring Supplier from ROS/SUS to ECC

    Hi,
    We're looking at the configuration document for transferring ROS supplier into ECC.  I have 2 questions:
    1.    Has anyone configured this is in their system and is using it?
    2.    Does anyone know if XI/PI configuration is mandatory?
    Thank you

    Hi,
    As I know, many users are using this scenario.
    PI is mandatory for this configuration.
    Regards,
    Ivy

  • Can not transfer the partner data from ROS to EBP

    Hi, All
    We are using SRM 5.0, and setup the ROS ans SUS in one client, EBP in another client. All the configuration was done, we maintained the table: BBP_MARKETP_INFO by SM30 with the following record:
    COMPANY_ROOT   VENDOR_ROOT    DUMMY_EKORG    USER_ROOT      DEF_CURRENCY
    O 50000001     50000025       O 50000001     O 50000001     USD
    When we create the business partner in BBPMAININT in EBP client by Business Partner from List. there is the error message: " Partner data not transferred from catalog, Inform system admin."  Anyone encountered this case, please share your experience. thanks a lot.
    GY

    hi,
    please check oss note with number Note
    1089734 - Error when transferring supplier from ROS to EBP.
    1) apply the note if it is relevant for your release and support pack....
    2) and then also go through all the parameters that are mentioned in the note , wether you have maintained in your system or not...
    >
    note mentions the following sympton
    Symptom
    User trying to transfer Supplier Data from ROS (Registration of Supplier system)to EBP (Enterprise Buyer Professional system).In the process of transferring error message appears saying "Currency of purchasing organization could not be determined" ( even when a default currency attribute is maintained in PPOMA_BBP for the user or for the purchasing organisation of the user.
    In case, the default currency attribute is not maintained in the PPOMA_BBP for the user or for the purchasing organisation, then at the time of transfer of suplier data from ROS to EBP system, error message pops out saying "Partner data not transferred from catalog. Inform system admin" .
    Edited by: khan voyalpad usman on Sep 13, 2008 10:30 AM

  • External Web Service setting for Supplier Registration ROS to EBP

    Dear guys,
    We are working on Supplier registration scenario where potential supplier are accepted in ROS client and then transferred to EBP via Suppliers Directory.
    For this we have defined External Web Service in both clients ROS and EBP
    Can anyone tell me what are the Parameters and setting required to define External Web Service?
    We have created New Web Service with following parameters in both the clients ROS and EBP.
    Web Service ID                     : ROS
    Description                          : Suppliers Directory in ROS Client
    Bus. Type of Web Service               : Lost of Vendors
    Display Partners Data Again in Vendor List      : X
    Vendor Root Node                     : 50000620
    Use Error Log                         : X
    Use HTTP GET to call Web Service          : <blank>
    Codepage of Service                    : <blank>
    Technical Type of Service               : <blank>
    Logical system                    : SRDCLNT300 (EBP Logical system)
    Path for Symbol for Service               : <blank>
    Define Standard Call Structure with following Parameters
    1        <blank>     http://erpdevsrci.egat.co.th:8010/sap/bc/bsp/sap/ros_prescreen/main.do
              URL
    2        HOOK_URL      <blank>     Return URL
    Please correct us.
    With this setting system does display the Suppliers Directory option in Supplier Screening (Suppliers Directory in ROS Client), however after selecting suppliers directory instead of listing the accepted supplier to transfer to EBP, system displays the same suppliers Prescreen again with no option to transfer accepted supplier to EBP client.
    I think I have not set the External Web services setting properly ..
    So can anyone send me the correct web service parameter setting?
    Regards,
    Sandeep parab

    Ramki/disha,
    I have defined following setting in external web services in EBP client
    Web Service ID    : ROS
    Description: External Web Service in EBP
    Bus Type of a Web service : List of Vendors
    Display Partner Data again in Vendor List : X
    Vendor Root Node : 50000620  (this is Vensor Root node in EBP client)
    Use Error Log : X
    Use HTTP GET to call Web Service : <blank>
    Codepage of Service: <blank>
    Techinical type of Service : <Blank>
    Logical system : SRDCLNT310 (this is ROs client from there supplier will be transfered)
    Path for symbol for service : <blank>
    Standard Call Structure Parameter setting as follows
    1. <blank> http://....ros_prescreen/main.do  URL
    2. sap-client 310 fixed_value
    3. sap-username dineshp fixed_value
    4. sap-password GAJANAN fixed_value
    5. HOOK_URL <blank> Return_URL
    6. ~OkCode ADDI fixed_value
    7. ~target top fixedvalue
    8. ~caller CTLG fixed_value
    Also defined ROS external web service as default CAT attribute in the organization setting.
    Maintained ROS client in SAP_BBP_STAL_STRAT_PURCHASER role.
    Created New Users in ROS as well as EBP and tried the scenario. still it failed to transfer the supplier from Ros to EBP.
    Where can we debug the error message?
    Regards,
    Sandeep

  • I have problem when transferring book (PDF/Epub) from Computer to iPad with the new iTune? Please Help....

    I have problem when transferring book (PDF/Epub) from Computer to iPad with the new iTune? Please Help....

    With iTunes 11 you can enable the left-hand sidebar via control-S on a PC, option-command-S on a Mac. If you are trying to get it to the iBooks app then with the sidebar enabled the process should be similar to how it was on previous versions of iTunes e.g. add it to your iTunes library via File > Add To Library, connect the iPad and select it on the left-hand sidebar, and then use the Books tab on the right-hand side to select and sync it to the iBooks app.

  • Sound Buzz when transferring file from Trash to desktop

    I get the occasional Sound Buzz when transferring file from Trash to desktop
    Its a Short "grounding" buzz similar to slowly plugging an electric guitar when the amp is on, but its loud !
    I am just using the internal sound,

    Brett - thanks for that input, but as stated in my original post this happens whether I do the copy within Finder, or from inside Bridge.
    Your note did inspire me to try one thing though: I UN-checked my Bridge preference to export caches to folders when possible, then I went to the folder I was trying to move (on the NAS) and did Tools > Cache > Purge Cache. I found that if the folder contained only files and no other folders, then I could move the folder to my desktop. However, if the folder in question had nested folders, then I still run into the same conflict.
    Question: since this conflict does not happen when moving a folder from one computer to another computer (but only from the NAS to a computer), I'm not sure how your logic holds when you say "Bridge is trying to cache the files you are moving and creates a ".BridgeCacheT" file before the remote version is copied"
    To answer your other question, we use AFP or at least is says "afp://server.local" when we connect. My apologies for not being an expert on this. The icon of the NAS on the desktop looks like the icons for the other computers.
    Thanks, I'm still trying to solve this. It's really become a major problem for us as we now have to drag files individually (rather than by folder) when we want to do something with them. -- Jim

  • When transferring photos from android to pc I get error code: c0000002.  It keeps looping.  Help.

    When transferring photos from android phone to pc I get error code: c0000002.  I am stuck in a loop.  Please help.

    thank you for answering.  the problem is at least currently resolved.
    On Tue, Sep 2, 2014 at 2:16 AM, Silkrooster <[email protected]>

  • When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact?

    My mac and I rely HEAVILY on the use of alias files and folders. The simple version of my question is: When transferring data from an old hard drive to a new one, is there a way to keep alias files and folders in tact?  These are not symlinks or symbolic links, they're all alias files and folders. 
    Is there any software out there that might help me with a solution?  Are there any tricks or tips you can give me to try?

    Use either Setup Assistant at first start, or Migration Assistant on subsequent occasions and all will be transferred intact. Given your wording I presume you are Unix savvy and will appreciate the problems that duplicate userids would cause, so of you use MA for the migration, make sure the target Mac has no userid equal to that on the source and you will be fine.
    SA does not have these issues since it runs before any user account is created, so it can simply copy over everything. But MA runs after the fact and only solves the issue partially by changing the UID in the user directory, leading to permission problems.

  • Problems when copying music from CD to i-Pod library

    Does anyone have problems with transferring music from a CD to the itunes?
    When i do this the CD sometimes sticks / jutters
    What should i do?
    SIMPLE answers please!
    Thank you

    Hi,
    Some music, like in normal CD, is in just CD music format (I dont know what they're called), and iTunes will automatically convert into format you specify (for example, if you would like iTunes to convert it into mp3, then select mp3) some CD are in mp3 format, but this is generally by individual, not retailer CDs.

  • HT4527 When transferring iTunes from old computer to new computer, even though all of songs were copied over, not all of them went to iTunes, some appear to be stored elsewhere. How can I find these songs, and how do I transfer them to iTunes?

    When transferring iTunes from old computer to new computer, all my songs were copied over, but not all of them were stored in iTunes. It appears they are on the computer somewhere, but not on iTunes. Where are these other songs likely to be, and how can I get them onto iTunes? Because of this problem, Apple will not allow me to update my iPhone.

    You may/must have had music files stored outside of your iTunes library.
    I'd recommend going to the Finder and then via the search box look for files with mp3 aif m4a aac etc. depending on the music format your digital music had. With the list of files shown you should be able to learn which files were stored outside of your music > itunes folder
    Chances are they could be burried somewhere under your documents, downloads, desktop, ... we all have different storage and organization habits.
    Then when you find the missing files, on the new computer you can do add to library and go to the folder on the other computer where the missing files are - if your systems are networked - or sneak them over using a USB thumb drive or portable hard drive if you have lots of files, or if you like to have an extra backup of that music, copy to optical disc.

  • Slow Wifi speed when transfering data from USB drive?

    Hello guys,
    Am I the only one to get slow WiFi speed when transfering data from USB disks or keys?
    This is the new Mac Mini July 2011 (Macmini5,2)
    Intel Core i7, 2.7 Ghz
    8 Go 1333 MHz DDR3
    Mac OS X Lion 10.7 (11A2061)
    Thanks
    Nicolas.

    Hello again,
    I'm also having this issue when using a Bluetooth Magic Mouse when downloading file. Is it a problem with the firmware or the BUS?
    Anyone have the same issue?
    Thanks
    Nicolas.

  • HT1473 Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

    Im having problem while transferring songs from PC to Ipod. Ive followed all steps 'File<Add to Library' but i cant find songs in my ipod. Ive also synced the ipod and backup as well but still same. what to do?

    Try:
    iTunes: Finding lost media and downloads
    iTunes: How to re-create your iTunes library and playlists
    Next try:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Also:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • Only some photos fill the screen on ipad when transfering them from my iphone 5

    Only some photos fill the screen on ipad 2 when transfering them from my iphone 5 can any body help please

    Sorry let me rephrase I transferred some photos from my iphone 5 to my ipad 2 , but when viewing photos on the ipad only some of them fill the screen why?? Is there an easy fix for this or is just one of those things that I will never get to the bottom of , can any body help

  • EVDRE error "encountered problem when retrieving data from webserver"

    Hi,
    in a EVDRE we always get the error "encountered problem when retrieving data from webserver"
    When analysing this further we noticed this is always generated when a base member is selected in the CV and the expansion on the row for this dimension is has one of the following expansion settings:
    DEP
    ALL
    NOEXPAND
    if we select SELF, the error disappears again and the EVDRE works fine again ... is this normal behavior?
    there is no problem with application nor dimension.
    D
    solved it

    Note that the keyword "ALL" does not include the member itself. This may cause some confusion, but as Harish implies, when you select a base member it finds no matches if your memberset is "ALL".
    If you want to design a report to handle the user moving back and forth between base and non-base members in their CV, you either need to include SELF,ALL or SELF,DEP, or something similar....
    OR you need to get a little fancier, and use EVPRO to look and see if the CV member is base -- evpro(app,member,"CALC") -- and then use some conditional logic in Excel to choose the correct expansion options. If Calc=N, use Self, otherwise use SELF,DEP or whatever you choose. This can be a bit tricky if you then want the user to be able to drill down in the report (especially if you want the workbook option to insert add'l rows on the expansion, rather than replace), but it's all possible.

Maybe you are looking for