Problems with 10.4.10 when installing iLife 08 and IWork 08

Hi there, I just bought iLife and IWork 08 and am having trouble installing them successfully. I upgraded to 10.4.10 to meet the requirements of IWork but my MacBook runs oddly when I install these two packages. Firstly the usual installer is not available so I am using a third party installer called pacifist to install the new software. The programs such as garageband and itunes and iphoto won't launch - other programs like safari crash. I am now back at 10.4.07. Any ideas on what could be causing these problems? My crash reporter references problems with frameworks and systemGUI. i did get Garageband to work briefly one night but the next day the problems returned. I have used disk utiity to check preferences but it was okay and does not seem to help. A hardware test was also okay and the system is operating fine in 4.7 so this seems to be a software issue. Any ideas? Should I wait unti the next version of 10.4.10?

I can see from your answer and others on this board, that we are not alone.
I was thinking of emailing Macworld or some of the other mac sites to get them to take up the story.
Otherwise I suppose it will be a period of denial from Apple
And then with a bit of luck an update that will iron out these bugs
Cheers
Andrew

Similar Messages

Installing ilife and iWork on on Macbook Pro with Mavericks

I purchased a MacBook Pro, used, and although it has Mavericks, ilife and iWork are not installed, the seller must have deleted them (or never installed them?) When I go to the app store, they show they need to be purchased. I thought they were included? How do I reinstall?
Thanks a million,
E

Preparing a 2nd Hand Mac for use -
You need to erase the HDD, reinstall the version of OS X that shipped from the factory on the Mac and then set it up as new with your own Apple ID.
User Linc Davis explains how a new owner can prepare a 2nd hand Mac for their own use.
https://discussions.apple.com/message/25468326

Problem with Printer Utility Setup when installing Epson printer

Hi everyone,
Hope some kind soul here can help me out on this.
I bought a Epson Stylus CX7300 All-in-one printer yesterday and am having difficulty installing the printer driver onto my eMac running on OSX 10.3.9.
I followed the procedure on the Epson installation disc and even called up their customer support office and went through step-by-step guides to troublesome the cause. Even downloaded the latest driver from the Epson site, and installed it, but every time I open up a document and tries to print, the following would occur:
1. When I click "PRINT", a pop-up will appear, and under the printer field, it will be indicated as "NO PRINTER SELECTED"
2. I would then select "EDIT PRINTER LIST" from the printer field - after which another pop-up will appear saying "You have no printers available. Would you like to add your list of printers now?"
3. When I click "ADD", an error pop-up will appear saying "The application Printer Setup Utility has unexpectedly quit. The system and other applications have not been affected. Would you like to submit a bug report to Apple?"
I have submitted tonnes of "bug reports" to Apple since yesterday but nothing happened.
I also tried to open Printer Utility Setup directly from under System/Applications/Utilities, but the same error will appear and it will just quit "unexpectedly".
Is there any remedy to this?
Oh, the strange thing is, the CX7300 can scan images fine, and I also managed to do a test print from Epson's utility.
Thank you.
Yours Sincerely,
Alvinology

Hi, I was just about to post the same question myself. I'm trying to sort out a friends iMac G5 with a Canon Pixma(?) printer. In this case the printer used to work OK, but after moving house and setting it up again, Print Utility crashes every time when trying to add the printer.
Thanks
Paul Nilsson

Problem with report generation toolkit when installed new office 2010

Dear all, I had LabView 8.6.1 and report generation toolkit for MSoffice 2003 perfectly working in my laptop.
Now I have added MSoffice 2010 and report generation toolkit does not work anymore since it is linked to new office.
How can I inform Labview to link report generation toolkit to the old MSoffice 2003?
regards
Max

The Report Generation Toolkit is ActiveX based. When you install the newest version of Office it registers the ActiveX server for that software, which the toolkit adapts to and uses.
Uninstalling Office 2010 would solve the issue, otherwise you will need to look at unregistering the 2010 component of Office ActiveX - but I'm not sure if that's possible.
Regards,
Peter D

When I turn my computer on I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. I think this has something to do with Apple "push". I had a problem with this in iTunes when I tried to sync my iPod Touc

When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware. I click on yes but nothing happens. The change has something to do with Apple "push". I recently had a problem with"push" on iTunes when I tried to sync my iPod Touch. I have latest software for iTunes and iPod. Can anyone tell me what to do to get this change to install?

ptford wrote:
When I turn my computer on (Windows 7) I receive a message that Apple wants to make a change to the hardware
Since hardware cannot be changed with software, perhaps you would be so kind as to post the exact wording of the message?

502 - Web server received an invalid response while acting as a gateway or proxy server. There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream cont

I am getting error while accessing url of lyncweb.domain.com, dialin.domain.com and meet.domain.com pointing to RP server.
502 - Web server received an invalid response while acting as a gateway or proxy server.
There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

When i try with https://lyncfrontend.domain.local:4443 and https://lyncfrontend.domain.com:4443 both opens but when i open the external domain name i get certificate .
ARR version installed is 3.0
To throw more light on the configuration:
Lync 2013 implemented, internal domain name is : domain.local and external domain name is : domain.com
All servers in VMs are with 4 core processor, 24gb ram, 1TB drive.
Frontend : Windows 2012r2 with Lync 2012 Standard Edition - 1 No (192.168.10.100)
Edge : Windows 2012 with Lync 2012 Std - 1 No
(192.168.11.101 DMZ) in workgroup
ISS ARR Reverse Proxy 3.0 : Windows 2012 with ARR and IIS configured. (192.168.11.102)
Certificate : Internal Domain root CA for internal and External (Digicert).
Internal Network : 192.168.10.x /24
External Network (DMZ) : 192.168.11.x /24
Public Firewall NAT to DMZ ip for firewall and RP server. So having two public IP facing external network.
Edge has : sip.domain.com, webconf.domain.com, av.domain.com
IIS ARR RP server has : lyncdiscover.domain.com, lyncweb.domain.com, meet.domain.com, dialin.domain.com
Have created SRV record in public : _sip.tls.domain.com >5061>sip.domain.com, _sipfederationtls._tcp.domain.com>5061>sip.domain.com, _xmpp-server._tcp.domain.com>5269>sip.domain.com
Installed frontend server using MS Lync server 2013 step by step for anyone by Matt Landis, Lync MVP.
Internal AD Integrated DNS pointing Front-end
Type of Record FQDN
IP Description
A sip.domain.com
192.168.10.100 Address internal Front End or Director for internal network clients
A admin.domain.com
192.168.10.100 URL Administration pool
A DialIn.domain.com
192.168.10.100 URL Access to Dial In
A meet.domain.com
192.168.10.100 URL of Web services meeting
A lyncdiscoverinternal.domain.com
192.168.10.100 Register for Lync AutoDiscover service to internal users
A lyncdiscover.domain.com
192.168.10.100 Register for Lync AutoDiscover service to external users
SRV Service: _sipinternaltls Protocol: _tcp Port: 5061
sip.domain.com Record pointer services to internal customer connections using TLS
External DNS pointing Edge & Proxy
Type of Record FQDN
IP Endpoint
A sip.domain.com
x.x.x.100 Edge
A webconf.domain.com
x.x.x.100 Edge
A av.domain.com
x.x.x.100 Edge
SRV _sip._tls.domain.com
sip.domain.com: 443 Edge
SRV _sipfederationtls._tcp.domain.com
sip.domain.com:5061 Edge
A Meet.domain.com
x.x.x.110 Reverse Proxy
A Dialin.domain.com
x.x.x.110 Reverse Proxy
A lyncdiscover.domain.com
x.x.x.110 Reverse Proxy
A lyncweb.domain.com
x.x.x.110 Reverse Proxy
In IIS ARR proxy server following server farms are added and configured as per link ttp://y0av.me/2013/07/22/lync2013_iisarr/
In proxy server had setup only following server farm : While running remote connectivity web service test : meet, dialin, lyncdiscover and lyncweb.
The client inside works fine internally and through vpn. Login with external client also working fine. But we are getting error in MRCA as follows.
a) While testing remote connectivity for lync getting error : The certificate couldn't be validated because SSL negotiation wasn't successful. This could have occurred as a result of a network error or because of a problem with the certificate installation.
Certificate was installed properly.
b) For remote web test under Lync throws error : A Web exception occurred because an HTTP 502 - BadGateway response was received from IIS7.
HTTP Response Headers:
Content-Length: 1477
Content-Type: text/html
Date: Wed, 14 May 2014 10:03:40 GMT
Server: Microsoft-IIS/8.0
Elapsed Time: 1300 ms.
Regards, Ganesh, MCTS, MCP, ITILV2 This posting is provided with no warranties and confers no rights. Please remember to click Mark as Answer and Vote as Helpful on posts that help you. This can be beneficial to other community members reading the thread.

I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

Will u help me or not?

I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab. Everything else seems to work okay in itunes. I have uninstalled it and reloaded it 4 or 5 times, but still freezes up.

I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab which shows the apps that are loaded on my phone. Everything else in the itunes software seems to be working okay. The problem is in the part where you sync the newly purchased apps. The apps will all be blank that are downloaded and that part of the software crashes itunes or freezes up. I can get out of itunes okay after the freeze up, but it just stops me from syncing anything that I have newly added. If anyone has had this problem before or knows someone that has, please let me know how I can fix it. I have uninstalled and reloaded itunes 4 or 5 times, but the problem is still there. I might add that I have been using itunes and purchasing apps for 2 to 3 years without any problems. HELP.

You would get better response from the iTunes community forum.
Have a nice day!

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server wher

I have a problem with two PDF's when trying to open them through a link on a web page. The two PDF's open fine with Adobe on my own PC and on the server I have copied it to but when they are opened through a link on a web page (pointing to the server where the PDFs open fine) I get an error 'There was an error processing a page. Invalid function resource' The other one just doesn't open at all. Can anyone help with this please?

Hello,
Are the pdf linked correctly in the website? Is this a public website? If yes, please post the link here.
~Deepak

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this. So far have been unable to use PE13 at all, any ideas anyone please!

I already have a fire-fox sync account. as i have problem with fire-fox i have uninstalled it and re-installed. and sync accnt deleted by mistake..how restore?

I already have a fire-fox sync account. as i have problem with fire-fox i have uninstalled it and re-installed. At firefox sync accnt deleted by mistake..how restore? i also have recovery key but its not working...

https://support.mozilla.org/en-US/kb/firefox-sync-troubleshooting-and-tips
https://support.mozilla.org/en-US/kb/ive-lost-my-firefox-sync-account-information
https://support.mozilla.org/en-US/kb/how-do-i-manage-my-firefox-sync-account

Im have a problem with my adobe id when i try to covert pdf files.

Im have a problem with my adobe id when i try to covert pdf files.

I think your question should go in the ExportPDF forum,
http://forums.adobe.com/community/exportpdf

Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks

Hello I have encounted a problem with Photoshop. Normally when you start a new documant, you are given the options to have A4, A3, ect page set ups. These inbuilt page set ups seem to have disapeared, does anyone please know how to fix this? Many thanks Ben [email protected]

Hello Trevor
Thanks for your message. You can custom set pages but there are no preset of page sizes like A4, A3, ect. I cannot click the size preference, nothing comes up
Ben

Hi, i have problem with my apple id when i want purchase app even free one, asked me for complete my card informations... but i don't want to use debit card because already i have gift card and charge it in my id... please help

hi, i have problem with my apple id when i want purchase app even free one, asked me for complete my card informations... but i don't want to use debit card because already i have gift card and charge it in my id... please help me.
when i unchek the card information it was show me an error!

Though you are being asked for card details it doesn't necessarily mean that the card will be charged for the purchase (unless you want to gift content). Have you tried entering your card's details to confirm the account ? You should then be able to remove it.
From http://support.apple.com/kb/HT5582 :
When making purchases, content credits are used first, followed by Gift Certificate, iTunes Card, or Allowance Account credits; your credit card or PayPal account is then charged for any remaining balance
Is it a new account ? If it is then unless a new account is created by following the instructions on this page (the instructions won't work with existing accounts) : http://support.apple.com/kb/HT2534
then you will need to enter card details (debit cards are no longer accepted in all countries) before the account can be used to download any item from the store.

Problems with 10.4.10 when installing iLife 08 and IWork 08

Similar Messages

Maybe you are looking for