Problems with 'COMMIT MISSING' - when using ABAP client proxies

Hi
We have a requirement - wherein while SAP std inbound IDOCs are being processed in the R/3 system- we need to monitor the processing of idocs - by sending relevant information out of the R3 system to a monitoring dashboard - outside of the R/3 environment.
Inorder to accomplish the above, we generated a async. client proxy class in the R3 system by pointing to a XI o/b message interface and that interface mapped on to DB calls - from which the dashboard was bringing up status of idocs being processed in R3
We made a call to the async class method from within the idoc user exit that lies within IDOC_INPUT_ORDERS FM . The user exit chosen to make the call was - after the salesorder processing for the inbound idoc was done in the above FM. We have not given any COMMIT WORK statement after the async client proxy method call within the user exit - since the call was being made from within user exit and we did not want to upset SAP std processing flow.
Now, when the inbound idoc processing is being done by using SAP std program rbdapp01 using parallel processing option of packets, the outbound message generated is in 'COMMIT MISSING' status - whereas - when rbdapp01 is executed in normal mode - the proxy message is sent out ok out of the R3 integration engine.
The program rbdapp01 has a COMMIT WORK statement after each IDOC packet is processed - but still with the parallel processing option - the proxy message stays in th R3 box - with the status 'COMMIT MISSING'
Any thoughts/ pointers on this is appreciated....

Hi Karthik,
I don't think you can get this to work using an asynchronous proxy - except perhaps by spawning an update task to send the data.
Perhaps you can re-cast this as a synchronous interface?
Regards,
Thorsten

Similar Messages

Facing problem with SOAMANAGER while working on ABAP Client Proxy

Dear Community Friends & Experts,
I am facing a problem with the SOAMANAGER, I think so. Let me explain you a scenario what I am into:
The scenario is like I need to Push data from BI table to SAP PI. We decided to go using ABAP client proxy as Sender and then will
receive it using FTP adapter to FTP address.
I have created Integration repository design object Data types, Message types, interfaces and mapping. Now I am into SAP BI and running SPROXY and generated proxy for my outbound interface. fine.
Till now its okay.Now I wanna my generated proxy to be available within the SOAMANAGER T-code I am not able to find my proxy in the list.
Can anybody send me detailed steps for outbound proxy to SOAMANAGER for creating local port for proxy. I wanna use proxy with WS adapter.
Second Query:
I need to using RSPC in SAP BI to trigger the proxy what code to write with SAP PI 7.0 version.
Can anybody bring some light to this problem...
<h5>Regards,
Gaurav Patwari </h5>

Dear Experts,
Problem solved, cannot say solved but yes its not required now as I am having Client Proxy call so it will be a native call to XI and which does not need SOAMANAGER things.
Thank you all for taking your time and writing answers.
Regards,
[Gaurav Patwari|http://gauravpatwari.wordpress.com]
Edited by: GauravPa on Apr 17, 2010 11:32 AM

HTTP Error with Status code 403 when using ABAP Server Proxies

Hi All,
I have been working on ABAP Client and Server proxies in my project. The weblogs by Ravikumar, Prateek Shah, Siva Maranani & VijayaKumari were very helpful and thank them all for just helpful and guiding postings.
Interfaces using Client proxies are working fine and have been tested successfully. But I'm facing bit problems with Server Proxies. The scenario is of File to SAP system via XI. Data is coming correct up to Technical routing in pipeline but at call adapter(for Server Proxy to SAP)in XI pipeline I receive Error:
HTTP response contains status code 403 with the description Business Server Page (BSP) Error Error when sending by HTTP (error code: 403, error text: Business Server Page (BSP) Error)
Previously I was receiving authentication and authorization related error of status code 401 and then in communication channel I replaced user profile with a user id having role SAP_XI_APPL_SERV_USER. The basis peron has created new user id with role SAP_XI_APPL_SERV_USER only and that I'm using. I've tried creating a HTTP destination with the created user id and in test connection too receive same error message.
Please help me out with your inputs and understanding on the topic.
Thanks and Best Regards
Prashant Rajani

Hi Prashant,
Please take a look at these threads..They deal with the same problem, and they have been resolved here.
BSP Authorization error
Service cannot be reached . error code 403 the reason forbiddn
403 Error when accessing the server
Hope your issue gets resolved.
cheers,
Prashanth
P.S Please mark helpful answers

PROBLEM WITH ALT-V WHEN USING CROATIAN KEYBOARD

Hi,
When Typing ALT GR+V (@ sign) in Croatian Keyboard, all the text from clipboard is copied into the text box (as it is pressed CTRL+V) plus the @sign.
There were some bugs filed long back regarding a similar issue for the German keyboard where the customer was using the AltGr key for special characters, same as in our case.
Below is the list of those bugs:
(1)     Bug 757614: GERMAN USERS CANNOT USE ALT-GR KEY TO GET SPECIAL CHARACTERS
(2)     666925
(3)     767865
(4)     768658
I have gone through the descriptions and mail chains mentioned in these bugs, and it seems that the issue was fixed in OJDK.
Please go through the above mentioned bugs once to get more details.
It seems that this is not ORMS issue. It seems to be an Oracle Forms or OJDK issue.
Can someone please advise on this as why is this happening. We are using Oracle Forms 10g.
Thanks and Regards,
Ashwini Swaroop Pradhan

Tom Gewecke wrote:
w/ all the keyboards and language settings.
What do you mean by that? The problem being talked about here is an inability to make French accented characters on a German keyboard. What is your problem exactly?
I've posted here because I guess it may be the same bug.
After upgrading I wasn't able to do special characters, including some accented vocals, like "ì", very common in italian language.
Then I've added an english keyboard, removed the italian one and added it again, so the problem with missing accented vocals was solved.
I still have the same problem with special consonants, like "z" and "c": if I hold my thumb on such letters, I have no options like, say, "ż" (such characters are very important for my field (linguistics) and if Apple won't solve this problem I'll be forced to look elsewhere).

Ibook G4 having problem with airport connection when using secure network

Hi,
I am currently using a brand new Macbook. I am connected wirelessly to a Comcast network through my Netgear Wireless-N 150 router model WNR 1000. The problem I am having is with the 4 year old ibook when I go to use the airport and connect to my existing network it says the password is incorrect. I spent time troubleshooting this with Netgear and basically we found out that the ibook does connect with the network when there is no security at all.
I erased the hard drive on this ibook to prepare it for sale and it is back to the factory settings. Is there some kind of firmware or drivers I am missing to use the airport as described?? I want to be able to show the buyer that the internet works etc. I also may want to install a few things on the ibook before the sale.
Thanks a mil
Message was edited by: omshanti

Did you reset the wireless router to see if by default, it has a different
wireless security then, than however it presently is set up?
The question you pose appears to be marked "answered or solved."
When you reinstall an OS X, the setup asks if you have an existing
wireless connection, or if you will be getting a new one; by default,
the setup will make the existing one the automatic one for OS X.
You should not have to add passwords or other, unless there has
been one set in KeyChain or for the specific wireless base in question.
Tiger 10.4.x does not require you to have a set password for wi-fi,
but you will find several levels of secure options available in OS X.
Not sure why your setup and configuration is problematic. Usually,
a totally new OS X installation is without issue. Sometimes, you
may have to administer a base station via Ethernet cable before
some configurations can use it, but an existing network should be
easy, unless it already has a password security in place.
The Mac will work without a password-protected wi-fi internet source;
often it will 'just work' even when moved to a new environment and
a neighbor's network, if not password protected, will appear among
other options in your vicinity and it will be automatically available.
Not sure if any newer OS X update parts, from the Combo update
files to take Tiger 10.4 to 10.4.11, plus others, would help the Mac
connect better to whatever wireless source of internet available.
I've not had that issue, as you state, except for when someone has
a protected network or passwords in place. Mine has passwords to
keep unauthorized neighbors from easy access; just in case.
In remote locations where few neighbors exist who could access wi-fi
from a lone source, no wireless security settings at all, work just fine.
I've done that; and found a little greater range was gained in signals.
And in the city (largest town in state) a computer I'd set up for use in
a password protected wi-fi network - later worked fine and found the
new owner's own wi-fi network without issues; and I had let the OSX
setup assistant do its job. If a local network is protected by WEP or
WPA2, etc with a password, one would be needed to access it. If not,
then the connection should be automatic.
Good luck & happy computing!

No contact with DHCP server when using VPN Client

Pretty weird problem I discovered recently.
We use the VPN Client to connect to a 1841 router. Everything works fine except for one small thing.
The client do not send out _any_ traffic if the destination is the ip-address of the DHCP-server the client got its original ip-address from.
This is verified by Wireshark. A ping on the client do not produce any ESP packets towards the VPN concentrator. No matter what traffic you try actually.
Discovered this when wanting to use Remote Desktop towards the Windows Server that is the local DHCP server and was not able to connect. Then tested ping and still no response. That made me look closer and found out that I could not communicate at all with the DHCP server.
As I said, pretty weird.
Anyone else have seen this? Anyone have a solution? Right now I use OpenVPN instead when I need to control that server.
- Roger

Hi and thanks for responding.
Nothing here apart from being unable to send any packets to the dhcp-server. No problem sending to any other system on the same subnet. The same happens when I connect my pc to another subnet that is served by another dhcp-server. Then I can not connect to _that_ dhcp-server. I can then of course connect to the previous dhcp-server.
I mean _no_ packets are generated out the client at all if the destination are your dhcp-server. No problem with the packet being blocked by a firewall or anything like that. Ping another system on the same subnet as the dhcp-server and the client happily generates ESP packets and sends them to the vpn-concentrator.
I do not know if it was clear enough in the first post so I am saying it here: the vpn-concentrator gives out the ip for the vpn connection. The dhcp-server I can not connect to is the server that gives the client its ip-address _before_ starting up the vpn client.
We use this vpn system so the IT personell will be able to connect to restricted resources from their laptops anywhere in the network, also when using wireless.
This was discovered when one admin wanted to connect from his laptop to a server that also happened to be the dhcp-server that had given his laptop his ip address before he used vpn.
Should be easy enough for anyone else to test. Just ping your dhcp-server after starting the vpn connection. No RFC 1918 addresses of course, there must be a route from your vpn-concentrator to your dhcp-server and at least icmp echo must be open through any firewall/acl.
The vpn version is 4.8.00.0440 on Windows XP configured to not allow local LAN access. I might test this with other versions/OS'es when I have the time.
Regards,
- Roger

Problem with JMS migration when using Ctrl+C to stop the managed server in cluster

          Hi,
          I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
          uses JMS as a asynchrous communication. We have MDB which listens to these JMS
          messages.
          If something is being processed on Managed Server 1 and while the request is in
          process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
          After this, i go to admin console and migrate teh JTA and JMS. After this, i am
          expecting other running Managed Server should restart the incomplete transaction.
          But this is not happening. The Managed Serve2 doesn't process the requst.
          But when i restart teh MAnaged SErver 1 again, it takes up the same request and
          processes it.
          Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
          Please note that the same thing is working fine when i stop the server using Admin
          console(Normal shutdown OR forced shutdown).
          Any comments in this regards are apprecciated.
          Thanks,
          Naresh


          Hi,
          I am having a clustered weblogic application running on Weblogic 7.0 SP5. My application
          uses JMS as a asynchrous communication. We have MDB which listens to these JMS
          messages.
          If something is being processed on Managed Server 1 and while the request is in
          process, i am stopping the the MAnaged SErver 1 using Ctrl+C.
          After this, i go to admin console and migrate teh JTA and JMS. After this, i am
          expecting other running Managed Server should restart the incomplete transaction.
          But this is not happening. The Managed Serve2 doesn't process the requst.
          But when i restart teh MAnaged SErver 1 again, it takes up the same request and
          processes it.
          Is this a known problem with Weblogic that it doesn't support Ctlr+C case?
          Please note that the same thing is working fine when i stop the server using Admin
          console(Normal shutdown OR forced shutdown).
          Any comments in this regards are apprecciated.
          Thanks,
          Naresh

I have been having problems with YouTube functionality when using Firefox, some of them having begun with the latest Firefox update

After a fairly recent update, I began having the option to paste text disappear, I've had backspace cause the browser to go back to the previous page while in a text box, and other issues which are apparently a matter of Firefox not recognizing the fact that I am typing in a text box.
After the last update, suddenly YouTube video page URL links no longer translate into links containing the title of the video, and also things like the use of bookend asterisks in order to have text appear in bold typeface no longer work.

i have the same problem with the above..firefox is running too slow with the games in facebook..but it runs good when browsing my updates, msgs, photos...firefox is totally opposite of IE..IE is faster with the games and slow while browsing..i love to use mozila but when i do games it really pisses me off...hope you could help me..

Problems with My Nano when using Accessories

I bought my nano in November and haven't had any problem with it...until now. For x-mas I got an ITrip and a music station. My Nano doesn't like them. It worked once, and then stopped working. I took my nano to an Apple Store where they reset everything. It worked...for a day and now my nano won't play music through the ITrip or music station! Any ideas because I don't want to reset it and then re-load everything when I want to use my accessories. Thanks!
Nano-4g Windows XP
Windows XP

Hello Ashers,
Welcome to Apple Discussions.
I don't want to reset it and then re-load everything when I want to use my accessories.
Resetting will not delete songs/photos from your nano. Sometimes there's a glitch in the nano, where you would have to reset:
Resetting iPod
The next time when you plug your nano to your iTrip and music station, you might want to try turning your nano on first. See if that helps.
Gary

Problems with USB device when using WindowsNT

Hi,
my problem is that I want to use a simulator which can only be connected with USB to the computer.
I used the VISA Driver Development Wizard as discribed in this link (http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416) and it didn't work.
I'm using Windows NT and VISA 3.1 and I read that it isn't possible to create a USB connection with VISA when using Windows NT. So my questions
1) is this right
2) Has someone a idea what I can do? I tried to use VISA USB Control and this also didn't work.
I hope I discribed my problem detailed enough. It's my first post.
Thanks for your responses
Joerg

As you can see in this table, USB is not supported by VISA under NT:
http://digital.ni.com/public.nsf/websearch/EE34F21ECC2BE01286256C52005D1A1F?OpenDocument
I would recommend to use Win2000 or XP. Using one of these OSes you could use this turorial to create your VISA-driver:
http://zone.ni.com/devzone/devzoneweb.nsf/Opendoc?openagent&1D0DD81FF1448CAE86256D90006EE2B4
If it is not posssible to change the OS, you have to look for other ways of programming your usb-device. Check the web or the Microsoft site for help concerning Windows SDK and USB.
Hope this helps a little!

Problem with path length when using oracle drive

Hello!
Does anybody else experience this problem with Oracle Drive?
When I create a deep or nested hierarchy in which the path length is longer than 250 (the limit might be 255) characters, I cannot access the deeper subpages.
Example:"X:\INET\START1\pfadlaengentest\das istein langer ordnername mit etwa 50 zeichen\and this is another veryveryvery long\and this is another veryveryvery lon2\and this is another veryveryvery lon3\and this is another veryveryvery lon4\and this is another veryveryvery lon5".
I can access the page "and this is another veryveryvery lon4" but not "and this is another veryveryvery lon5"
Is this problem due to WebDAV?
What can I do - I think it is a critical error / bug?
Regards Joerg.

I opened a service request and oracle support could help me.
The problem is the windows file system: the path length cannot be longer than 256 chars.
There's a workaround with MS-Webfolders.
More information is available via metalink: watch out for SR-Number 5659267.992.
PS: Thanks to Bert
bye :-j (joerg)

Problem with Commit button When Backing bean is in Request Scope...

HI Everybody,
I have a Backing Bean in request scope having over 1000 lines of code, And in my JSPX page I have a table binding with a view object and At run time when user select the row in table and click the edit button so user will be able to edit that selected row in the same table at run time.. but the problem is : when the user enters some data in the Editable inputTexts and then clicks save(Commit), then the save button doesn't work..but when i delete any selected row and then press save then it is working fine..
And to test it in Session scope i made another sample page where every thing is working very fine..
Now i want to know What is the difference between Session scope and request scope bean...
And is there any solution to Save editable input text in Request scope?.
Also want to know that is it safe to set the scope of my main bean class to session scope without effecting the current running functionality? which is having over 1000 lines of code and lot of component has been placed...
Please help me to resolve this problem...
Thanks in Advance to all of you
Fizzz..

Hi Frank...
In my code i used almost same logic as Andrejus Baranovskis has explained in his Editable Table example...
You can refer that example to see what problem I'm facing...
http://andrejusb.blogspot.com/2007/04/create-edit-and-delete-operations-in.html
The Bean Scope in this Example is Session scope...Save button is working fine...
But as i Change the bean scope to Request scope then Save button is not working for Edit but it is working for Delete Action very well..
I want that save button should work also for Edit action in Request Scope..
Please Make me understand that why it is happened like that..
and help me to find the solution..
and Also if you have a better document to Explain the life cycle of Application in Different Bean Scope...So please provide me that Doc to me...
It would be a great help for me to understand the concept of session...
Thanks Frank
Fizzz...

Problems with JAX-WS when using security (e.g. username token profile)

Hello,
I am deploying a web service on weblogic 11g (10.3.1) with this policy:
@Policy(uri = "policy:Wssp1.2-2007-Https-UsernameToken-Plain.xml",attachToWsdl=true)
I have another web application as client which is using a JAX-WS SOAP handler to communicate with web service
and everything works fine when my client is deployed on tomcat 6 (JRE 6) (anthentication goes through)
The handleMessage() method of my handler is posted here :
     public boolean handleMessage(SOAPMessageContext context) {
     m_logger.debug("UserNameTokenHandler handleMessage() called");
     Boolean outboundProperty = (Boolean) context.get (MessageContext.MESSAGE_OUTBOUND_PROPERTY);
     SOAPMessage message =context.getMessage();
if (outboundProperty.booleanValue()) {
     m_logger.debug("\n (client protocol handler) Outbound message:");
try {
     SOAPEnvelope envelope = context.getMessage().getSOAPPart().getEnvelope();
     SOAPHeader header = envelope.getHeader();
     if (header == null ) {
          header = envelope.addHeader();
     SOAPElement security = header.addChildElement("Security", "wsse", WSSE_NAMESPACE);
     SOAPElement usernameToken = security.addChildElement("UsernameToken", "wsse");
     usernameToken.addAttribute(new QName("xmlns:wsu"), WSU_NAMESPACE);
     SOAPElement username = usernameToken.addChildElement("Username", "wsse");
     username.addTextNode(user);
     SOAPElement password = usernameToken.addChildElement("Password", "wsse");
     password.addTextNode(pass);
     } catch (Exception e) {
          m_logger.error("Failed to add username token profile security", e);
} else {
     m_logger.debug("\n (client protocol handler) Inbound message:");
return true;
but when I deploy the same client on weblogic server it fails to communicate with my web service with this error:
javax.xml.ws.soap.SOAPFaultException: Unable to add security token for identity, token uri =http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#UsernameToken
I noticed Weblogic has some packages to handle security like:
weblogic.wsee.security.unt.ClientUNTCredentialProvider
weblogic.xml.crypto.wss.provider.CredentialProvider
weblogic.xml.crypto.wss.WSSecurityContext
So I added another mechanism using weblogic package to add username password to SOAP header
Map<String, Object> request = ((BindingProvider) proxy).getRequestContext();
          if (connectInfo.get("username") != null && connectInfo.get("password") != null) {
          List<CredentialProvider> credProviders = new ArrayList<CredentialProvider>();
          //client side UsernameToken credential provider
          CredentialProvider cp = new ClientUNTCredentialProvider((String)connectInfo.get("username"),
                    (String)connectInfo.get("password"));
          credProviders.add(cp);
          request.put(WSSecurityContext.CREDENTIAL_PROVIDER_LIST, credProviders);
This seems to be ok but only for weblogic.
I don't want to have one client for deploying on weblogic and another one for JAX-WS
I suppose weblogic follows the standard and should support the original approach.
Is this an incompatibly issue or am i missing something

In one of WLP Pageflows, I invoke a SOA BPEL WebService that needs Security Header like the way you have. I have my own Handler class and I call the below private method in handleMessage(...) and so far it is working fine. Security Header is adding fine.
One difference I could see in your method and my method is when we create SOAPElement for "Security" Tag, at the time of creation itself, I pass the third argument also that is the namespace. I remember vaguely, when I used code like yours, like first instantiate with only 2 args. Then set the namespace. It did not work. So I used the API, that takes the namespace as third argument.
So try something like below. This is a working code snipped deployed on WLP 10.3 (WLP is on top of WLS 10.3).
Thanks
Ravi Jegga
     private void setSOAPSecurityHeader(SOAPEnvelope soapEnvelope) throws Exception {
          try {
               //soapEnvelope.addNamespaceDeclaration("soap", "http://schemas.xmlsoap.org/soap/envelope/");
               soapEnvelope.addNamespaceDeclaration("wsu", "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd");
               SOAPHeader header = soapEnvelope.addHeader();
               String namespace = "http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd";
               SOAPElement securityElement = header.addHeaderElement(soapEnvelope.createName("Security", "wsse", namespace));
               securityElement.addNamespaceDeclaration("", namespace);
               //securityElement.addNamespaceDeclaration("env", "http://schemas.xmlsoap.org/soap/envelope/");
               SOAPElement usernameTokenElement = securityElement.addChildElement(soapEnvelope.createName("UsernameToken", "wsse", namespace));
               usernameTokenElement.addNamespaceDeclaration("", namespace);
               SOAPElement usernameElement = usernameTokenElement.addChildElement(soapEnvelope.createName("Username"));
               SOAPElement passwordElement = usernameTokenElement.addChildElement(soapEnvelope.createName("Password"));
               // For Testing Purposes only hardcoded this username and password values. Later on this may be set dynamically
               usernameElement.setValue("xxxxxxx");
               passwordElement.setValue("yyyyyyy");
               //SOAPBody soapBody = soapEnvelope.getBody();
               //SOAPHeader soapHeader = soapEnvelope.getHeader();
          } catch (Exception e) {
               // Handle This error in the main method that is calling this private method. So just return the Exception as it is...
               throw e;
     }

Problems with Array-Parameters when using Document-Binding

Hi,
I use the following environment:
JDeveloper 11.1.1.3.0
WLS 10.3.3.0
I created a small EJB (2.1), containing a simple method, which is using arrays as parameters:
public String doTestArray(String[] aStringArray, int[] aIntArray)
throws RemoteException;
I exposed this EJB as a Webservice using JDev's Webservice wizard. I choosed Document/Wrapped-Binding. WSDL and mapping file are being generated. Made an EAR-Deployment-Profile and deployed the application to Integrated-WLS.
I tried to test the Webservice with the WLS integrated test client, which is generating the following request:
<doTestArrayElement xmlns="http://model/types/">

<arrayOfString_1>string</arrayOfString_1>

<arrayOfint_2>3</arrayOfint_2>
</doTestArrayElement>
Unfortunately, the invokation fails. WLS returns
weblogic.wsee.codec.CodecException: Failed to decode message
at weblogic.wsee.codec.soap11.SoapCodec.decode(SoapCodec.java:188)
at weblogic.wsee.ws.dispatch.server.CodecHandler.decode(CodecHandler.java:139)
That only happens in methods, which use array-parameters. Simple parameters are no problem.
However, when I use RPC/Encoded as Webservice-Binding, everything seems to be fine.
Does WLS have problems in general using array-parameters and Document-Binding?
Any help would be appreciated.
Thanks,
Stefan

Hi Josko,
Where do you have this problem 3.5 or 7.0 BexAnalyzer.
When ever heirarchy icons are created in BEx, respective hyperlink is assigned to each of them, Make sure that you dont manipulate with them,,
If you still have problem then create OSS message.
Regards,
Vinay

Problem with 'action' attriubte when using 'rendered'

I have something really strange;
I have a JSF page used to insert a record and when inserting is successful, I set a REQUEST scope parameter called 'saved' with a value of 'true' as following:
FacesContext.getCurrentInstance().getExternalContext().getRequestMap().put("saved",true);Now, in the JSF page I already have a <h:commandButton ...> on the SAME previous JSF page used to collect the data :
<h:commandButton rendered="#{requestScope.saved}" action="#{insertionBean.displayNew}" value="Create another"/>As it is shown, the rendering of this button is conditional ONLY after complete inserting. Until now every thing is OK, and the button rendered only as expected, but what is not expected is that when I click on the button the page only reloads and the method in the action attribute is never fired.
Does the attribute rendered have something to do with RestoreView at the server side? Becasue when I DELETE it, the button fires the method, the problem is only when I use it in this scope.
How I can accomplish this goal?!
Thanks for helpful people

The value of the rendered attribue is re-evaluated during apply request values phase. So you need to transfer it to the next request using h:inputHidden or, better, t:saveState (so that it also survives validations).

Problems with 'COMMIT MISSING' - when using ABAP client proxies

Similar Messages

Maybe you are looking for