Problems with Edge Animate and back button ios and firefox

I've put a bit of Edge content in a draft webpage:
http://cassidausa.com/indexy
..and am noticing a couple of issues:
1
When viewing in ios, I click through the content (there are links to products within the Edge animation), and then press the back button on mobile safari, only the Edge content is displayed, not the rest of the page.
2
When viewing in firefox, after clicking through a link within the Edge content and pressing the back button on the browser, the animation is paused from the point it was clicked. Other browsers that I've tested this on refresh the animation.
Ideally the edge content would continue to play from where it was.This is what seems to happen when I preview the animation in the browser from Edge animate.
Any help would be appreciated.
I really need to have this working or else I'll have to abandon creating the content in Edge.

This has always been the case for any animation in CP to be on top. Please
file a feature request. Same for communication between OAM and CP, none
for the moment. You van have transparent background and pause/play button
in OAM, could be a workaround.

Similar Messages

Problem with Edge animate and epub3.

Greetings
I created some interactive web pages using adobe edge animate cc for a book that will be displayed on ipad (Epub 3)
when I test the web pages on pc they are displayed exactly as I want them to be.
But when I try them on Ipad It shows no images.
So I tried to append the images using some JQuey code
$('#Stage').append("<img src = '....' />");
and then when I tried to test this on Ipad all images where invisible too but when I rotated the device 90 degrees
all images became visible.
So when viewing those pages all images are invisible until rotating the device 90 degrees images become visible
any suggestions where the problem could be
I need the images to be visible when I open the page without the need of rotating the ipad
I appreciate any help.

Hello,
Please double click on the symbol and make sure "autoplay " is unchecked in the stage properties. then republish the OAM file and then try.
If the issue still persist please share the compressed project file with us to take a look at it.
Regards
Vivek

Problems with Edge Animate Animations

Hello There
I am Using CP8 with responsive projects. It appears that no matter what if an edge animate file is imported into a slide it lays on top of everything else and trying to put a caption or an image or anything else on top of it will not work (it shows behind it). also I have a custom pause play button on the slide and it does not work on any slide containing an edge animation. Anyone else found these problems and maybe a solution?

This has always been the case for any animation in CP to be on top. Please
file a feature request. Same for communication between OAM and CP, none
for the moment. You van have transparent background and pause/play button
in OAM, could be a workaround.

Problem with Edge Animate oam file's autoplaying inside Muse

Hi,
I have created a Donut Chart animation in Edge Animate. It has 6 donut charts. Each chart is a symbol with animation inside. Everything looks good in edge animate. But, the problem is the .oam file is not working like I want inside Muse. The scroll effect function of is not working. It autoplays every time, regardless of the scroll settings applied. I am using Edge Animate 2014.1.1 and Muse 2014.3.1. So, it's kind of the latest versions.
I tried several different methods. I found out that the animation works fine in Muse if I don't use any symbol in Edge Animate. Then the scroll function works like a charm. But if I use symbols, then the scroll function stops working. I want to use symbols for a reason. Because, I am making the website as a template to sell and want to include Edge Animate animations in it. Without using the symbols, it will create several objects in one place. And it would be too hard for people, with less knowledge of the program, to edit them.
What should I do now? Please help!
Best Regards

Hello,
Please double click on the symbol and make sure "autoplay " is unchecked in the stage properties. then republish the OAM file and then try.
If the issue still persist please share the compressed project file with us to take a look at it.
Regards
Vivek

Sync-problem with 'my photo stream' between iPhone (IOS) and PC (Win7)

Hi all,
I have a problem with the automatic sync of "my photo stream".
My photo steam on my IOS device contains 52 photos.
On my Windows computer there are only 43 photos available.
There is no logic behind the missing photos.
I took 2 more photos to test the stream. After I took the photos I've 54 photos in my album. 2 min later the upload seems to be completed because on my IOS device I've 54 photos.
I've waited for over 2 hours now and on my Windows computer there are still 43 photos. So the new ones are missing beside some missing photos in between!
What I've already done:
# re-install iCould on Windows computer
# reset iPhone to factory defaults
# several shutdown and reboots of all devices
maybe someone can help me with that problem!
thanks in advance!
cheers
max

I tried the sign-out/reboot/sign-in and now it's stranger than before.
On my iPhone I have 79 pictures in 'my photo stream'.
On my PC I have 24 randomly picked photos in 'my photo stream'.
IMG_0001.JPG, IMG_0002.JPG, IMG_0003.JPG, IMG_0004.JPG, IMG_0005.JPG, IMG_0006.JPG, IMG_0007.JPG, IMG_0008.JPG, IMG_0009.JPG, IMG_0010.JPG, IMG_0011.JPG, IMG_0012.JPG, IMG_0013.JPG, IMG_0014.JPG, IMG_0015.JPG, IMG_0017.JPG, IMG_0022.JPG, IMG_0023.JPG, IMG_0028.JPG, IMG_0029.JPG, IMG_0030.JPG, IMG_0035.JPG, IMG_0041.JPG, IMG_0049.JPG
Something very strange is happening here...

Audio problem with Edge animate CC 2014.1 oam files in DPS 32 (Viewer App in Ipad)

Hi there team,
I can hear no sounds in the Ipad viewer. I think the problem may be the last update of the Ipad viewer app. But not sure if the problem is with the last 2014.1 update of Edge.
The animations work fine in Chrome with onclick but they dont'ty work in the Ipad with the ontouch commands. I also checked that the oam file contains the .mp3 in the media folder (Seems that Edge 2014.1 does this right).
They are actions, not music in the background (I know there's an iOS limitation with this).
Anyone with the same problem? Could you check if your projects work fine after the last updates?
Thanks!
Rubén.

I have just found the same problem. I have an Adobe DPS article that uses Adobe edge that play audio when 'tapped', I built this before the CC 2014.1 update and that one works fine. I have created another article following the same process but using the updated version and the audio will not play.
Both files are placed OAM files. Audio worked fine in the browser during testing.
Please tell me this has not been removed as a feature!

How do I use edge commons composition loader to load multiple compositions with a next and back button?

I am working on an interactive book and have set up each page as a separate composition in edge.
I am using the edge commons JS library to load multiple compositions into a main composition.
You can see how this works here: Edge Commons - Extension Library for Edge Animate and Edge Reflow | EdgeDocks.com
The way the edge commons tutorial is set up requires a button for each composition i want to load. I am interested in loading multiple compositions with a "next" and "back" button, and a "swipe left, "swipe right" gesture on the content symbol that each composition is loaded into. I also need the swipe features on the content symbol not to interfere with the interactive elements on the loaded composition.
Please suggest a solution that will work without adding additional scripts beyond edge commons and jquery.

Sort of. I'm using this code inside an action for a button symbol. But it doesn't work perfectly. Trying to debug it.
Let me know if you have any luck.
//Check to see if pageCounter already exists
if (typeof EC.pageCounter === 'undefined') {
// it doesn't exist so initialize it to first page
EC.pageCounter = 2;
//check if the page is only 1 digit -- patch for single digit
if (EC.pageCounter < 9) {
// it is, so we need to pad a 0 on the front.
EC.pageCounterString = "0" + EC.pageCounter;
//e.g. 01 ...09,11,12,13....115,222352,,....
else {
EC.pageCounterString = EC.pageCounter;
EC.loadComposition(EC.pageCounterString + "/publish/web/" + EC.pageCounterString + ".html", sym.$("container"));
EC.pageCounter = EC.pageCounter + 1;
//TODO for back -1

Buttons created with edge animate are not working on android and windows devices

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Hello, I created a moble version of my website with edge animate (3.0).
The menue-bars/buttons work fine with iphone and ipad, but not with android and windows devices.
http://www.design-werk.org/buchgestaltung_kunstbuch.html
Does anyone have an idea and can help me with that?
Thank you guys,
Wolfram

Problems with Next and Back Buttons ActionScript 3.0

Hi,
I have set up a Back, Play and Next buttons in a slideshow I am making. The next and back buttons work correctly until it gets to the end.
If I press the Next button it goes back to what appears to be Frame 1 and will not go to the next slide. If I press the Back button it will then go to Frame 201 and If I press next again it will go to Frame 1. It will only go back and forth in between those frames.
If I press the Back button from the beginning it goes through the slide show correctly then it gets stuck at Frame 1. If I press next button it goes to Frame 121 and gets stuck in between 121 and 1.
I can't figure this out please help.
My code on Frame 1 is:
stop();
play_btn.addEventListener(MouseEvent.CLICK,playslideshow);
function playslideshow(event:MouseEvent) { gotoAndPlay(2); }
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_2);
function fl_ClickToGoToAndStopAtFrame_2(event:MouseEvent):void
gotoAndStop(40);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_8);
function fl_ClickToGoToAndStopAtFrame_8(event:MouseEvent):void
gotoAndStop(281);
My code on Frame 40 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_7);
function fl_ClickToGoToAndStopAtFrame_7(event:MouseEvent):void
gotoAndStop(121);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_9);
function fl_ClickToGoToAndStopAtFrame_9(event:MouseEvent):void
gotoAndStop(1);
My code on Frame 121 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_3);
function fl_ClickToGoToAndStopAtFrame_3(event:MouseEvent):void
gotoAndStop(201);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_10);
function fl_ClickToGoToAndStopAtFrame_10(event:MouseEvent):void
gotoAndStop(40);
My code on Frame 201 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_4);
function fl_ClickToGoToAndStopAtFrame_4(event:MouseEvent):void
gotoAndStop(281);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_11);
function fl_ClickToGoToAndStopAtFrame_11(event:MouseEvent):void
gotoAndStop(121);
My code on Frame 281 is:
forward_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_5);
function fl_ClickToGoToAndStopAtFrame_5(event:MouseEvent):void
gotoAndStop(1);
back_btn.addEventListener(MouseEvent.CLICK, fl_ClickToGoToAndStopAtFrame_12);
function fl_ClickToGoToAndStopAtFrame_12(event:MouseEvent):void
gotoAndStop(201);

I found the solution! Flash CS5 Tutorial 6 Click On Button Go To Another Frame.avi - YouTube
I had to Convert to Keyframes each frames I wanted to jump to on the buttons layer. Then highlight the button and give each another instance name! Like forward1_btn, forward2_btn, back1_btn, back2_btn... I did that and adjusted the action-script for each button.
Frame 1
stop();
play_btn.addEventListener(MouseEvent.CLICK,playslideshow);
function playslideshow(event:MouseEvent)
gotoAndPlay(2);
forward1_btn.addEventListener(MouseEvent.CLICK, Shoot_1);
function Shoot_1(event:MouseEvent):void
gotoAndStop(40);
back1_btn.addEventListener(MouseEvent.CLICK, Back_1);
function Back_1(event:MouseEvent):void
gotoAndStop(281);
Frame 40
forward2_btn.addEventListener(MouseEvent.CLICK, Shoot_2);
function Shoot_2(event:MouseEvent):void
gotoAndStop(121);
back5_btn.addEventListener(MouseEvent.CLICK, Back_5);
function Back_5(event:MouseEvent):void
gotoAndStop(1);
And so on...

Update only a part of a project with Edge Animate CC 2014.1.1 PROBLEM

WIN 8.1
Edge Animate CC 2014.1.1
Firefox 35.0
The Problem started after Update to Edge Animate CC 2014.1.1
I want to update text which is an Edge Animate file
The original Project was programmed with Edge Animate 1.0(not CC)
After I made the changes and saved the file I get a “updatedtext_upgraded” folder that contains the new files.
I am not sure what to do with that folder:
A) Do I have to exchange the data from the Folder ”updatedtext_upgraded”?
or
B) Do I have to put the whole project into the folder “updatedtext1_upgraded”?
or
C) Do I have to develop the whole Project new with AN CC 2014.1.1?
Thank you

I am currently having issues opening older compositions in 2014.1.1
I have never used an earlier version but have a large project and I am using EA for the first time.
Before I started it I gathered many tutorials and downloaded examples of the features I would need in my new project only to find that they all were created in earlier versions of EA and when I publish from my version they are not working properly in a wide variety of ways.
It seems there are few tutorials built for the very latest version - things like custom scrollbars for text and loading and unloading composiitons - see huge lists online of things Adobe have apparently 'fixed' with this version but it feels like other things are broken.
I am now desperately searching for information on what exactly is deprecated and what I need to do to get files working correctly.
Very worried indeed.

Problem with the browse sequence back and browse sequence next widget placed in the screen layout

Hi,
Some basics: We are using Robohelp 10 to generate multiscreen html5 output. We used the pharmaceutical screen layout downloaded from: http://helpx.adobe.com/robohelp/robohelp-screen-profiles-layouts.html but modified it to match our GUI.
We are having a problem with the browse sequence back and browse sequence next buttons placed in the screen layout from the widgets tool bar. We are in no way experts at this part of Robohelp...and the css portion of all this is a bit of mystery but we have managed to get mostly what we need. Now we just need these buttons to work. In the past we used Airhelp and things worked great. Can anyone help us understand why the sequence buttons are not showing up in the output even though it does in the topic preview?
Also
This shows up in the layout.css file:
a.wBSBackButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSBackButton {
                border: none;
a.wBSNextButton {
                margin: 0 8pt 0 0;
                padding: 0;
                background-color: transparent;
img.wBSNextButton {
                border: none;
Also btw, I forgot to mention that we are linking our FrameMaker files.
Appreciate the help.
Thanks!

hi pradeep
It does not happen but if you Wait for a while that may be solved

My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

i have the same problem...my ipod is 4th generation?uggghhhhh

I was messing with the computer, not sure what i hit but now all my toolbars at the top of the screen are gone? (file, edit, history, tools and my forward and back button). Please help me get these settings back to the way they were?

My file, edit, view, history, bookmarks, tools, and help buttons at the top of the screen are gone, along with my forward and back button.

For details of how to restore it, see https://support.mozilla.com/kb/menu+bar+is+missing
Once the menu bar is restored, you can use the Toolbars entry in the View menu to restore other toolbars such as the navigation toolbar.

I have a problem with my itube. I had itube and its gone. Now i cant get it back. How can i get it back without pay for it again?

I have a problem with my itube. I had itube and its gone. Now i cant get it back. How can i get it back without pay for it again?

We are Apple users here, and we answer technical questions.
Sorry, we cannot help you.

Glitches and Load Speed Issues with Edge Animate Site

I recently created a website at www.goshowpro.com and am having some glitches and load issues occur and would appreciate any help or insight into the matter. The site loads relatively quickly on my computer and my hosting servers technical support system but when I show it to my client it takes anywhere from 15-20 seconds, even after I have cleared the cache and cookies. All my image files are 'gifs' as to alleviate memory usage and I don't know what else to do that I haven't tried yet. Additionally, when you go to the services page from the about page, the light beams don't connect to the lighting fixtures and the text is placed differently than what I initially had in Adobe Edge Animate before I published the files. And the facebook link doesn't go to facebook but to www.goshowpro.com/facebook.... (ie I get a 404 error) even though in the program I have the link set as www.facebook.com.... I don't know what else to do besides what I have been doing and would very much appreciate any insight into these issues.
I should also mention that I used more html files than I initially planned due to lack of support on creating complete animation functionality with Edge Animate. I would like to have everything on one page but I don't know if that would be possible with the current version of Adobe Edge Animate (1.0.1.204.22434). Thank you again for your help.
Mike

Hi, Mike-
Have you tried profiling? You can use Firefox's Firebug or Google Chrome Inspector to see what's taking so long to download.
http://blogs.adobe.com/edge/2012/01/04/why-cant-it-just-work/
-Elaine

Problems with Edge Animate and back button ios and firefox

Similar Messages

Maybe you are looking for