Problems with Exporting Tabs - Component Export

Hi,
i'm having the following problem.
i have two applications in the same workspace. application 630 and 640.
now i try to export the tabs from app 640 in "Component Export".
in the export file i search for
wwv_flow.g_flow_id := nvl(wwv_flow_application_install.get_application_id,640);
and replace it with
wwv_flow.g_flow_id := 630;
now i'm going to application 630 and import the file. everything is fine and the tabs are here.
but in App 640 the tabs are all deleted!?
what is going wrong?
thx
Dila
Edited by: Dila on 28.09.2012 04:13

Thanks for that - unfortunately I have lost disk number 1 and can only find disk number 2. Honestly, I never thought I'd need them, and they've been packed and unpacked at least 4 times since I bought the computer.
I am trying to get the disk from mac friends - I'll see what happens. If anyone knows how to get hold of these old disks, or another work-around, I'd be very grateful...
cheers and thanks again,
Kerry

Similar Messages

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

As you are asking about it, looks like you do see a problem. So if googling does not provide a solution, you should describe the issue in detail so we can try to help out.

Problems with videos when I export

Hi,
I have some problems with my videos when I export them. I edit my video, but I have problems with audio in the exported video. Either the audio is missing completely or I hear the audio from another videoframe. I thought that the transitions are the problem, but they're not. Sometimes I have the problem also when I watch the video in iMovie. CAN SOMEONE HELP ME?

Welcome to Apple Discussions Alek,
Does this issue happen with more than one project in iMovie or is it just one?
If the audio is out of sync or missing and it is confined to only one project, the most I can suggest is that you restore from a backup copy as that suggests the project file is corrupted.
If the issue is happening in multiple projects do a test to make sure iMovie is working correctly:
Capture 5-10 minutes worth of iSight footage.
Edit the movie adding a few titles and transitions.
Export to quicktime.
Is the audio correct here?
If the audio is fine that means that iMovie is fine. Something is wrong with the projects or the original footage. You could try taking the Event you are working with, adding it to a new project, and then without editing it, export the entire project out as Quicktime. Then import the resulting file as a new event. The process of exporting (encoding) and then re-importing might clean up minor corruption within the file.
Hope that helps

Problem with Cross tabs

I have a problem with cross tab.
When I do grouping on date according to month and summarize the units I am getting the result as 58
while I do grouping without the croos tab generally in the details section I get the result to be 64.
I am not able to understand where is the problem.
Even when I write a query i get the answer as 64.

Hi,
Summarizing with a Cross-tab and creating a summary of a group are one and the same; I mean, the summary results are always the same.
Could you check the summary operation in the crosstab, could you confirm if it is not count or something else?
Also, create a summary and place it on the Group Header/Footer. It should be same as the Crosstab results for the that particular group.
-Abhilash

Problem with switching tabs in top level navigation for Roles

Hi,
I've created two tabs (based on two roles) in the portal top level navigation menu. When clicking the first one it opens as it should. Then when clicking on the second tab it will not open, instead the first tab open up again, it sort of switches back automatically.These two roles are basically consists of worksets and iviews(accessing to r/3).
Does anyone have any expericene with this type of problem?
please suggest me
Thanks
Aravinda

Hi Aravinda
Please check this link
Re: Problem with switching tabs in top level navigation
Regards
Geogi

Problem with Page Splits in exporting to ePub from ID CS6 v8

Hi,
I have been working on several booklets for a client and after desiging the print version, we've been creating epub versions to be offered from their website. I've had the same issue arise twice now, with two different files.
The ID documents are created with Word docs that have some left over paragraph styling, which doesn't show in the print version, but require finding and fixing during epub exports. I have started out exporting the files to epub just fine, using the Paragraph Style that I had chosen for the Chapter Titles as the page break choice in the Advanced export tab in the Split Document dropdown list. It's worked multiple times, then suddenly reverts to Do Not Split, and the Paragraph Style for the Chapter Titles has dissappeard from the drop down list. The first time this occurred, I tried duplicating, renaming and changing the Paragraph Style used, but that new style didn't appear in the dropdown list either. For that file, I finally gave up, reverted to working with an older epub I luckily had, and hand fixed all the issues in the HTML files. Not fun.
However, it's a month later, and this same glitch has occurred in another file. Has anyone experienced this problem, and is there a fix for it? Would really appreciate some help with this one.
Daria

Try restoring your InDesign preferences and see if that helps. Here's how:
http://pfl.com/trb

Problem with GuardianEdge and Discoverer export

We're having problems doing XLS or SLK exports out of Discoverer Plus 10g and appears to only be happening on PCs where the GuardianEdge encryption product has been installed. In fact, we can export to a shared drive (i.e. server not protected by GuardianEdge) and the export works fine -- even from those PCs where GuardianEdge has been installed. So therefore GuardianEdge is our prime suspect at the moment.
When we try to save to our GuardianEdge protected PC, we get the message "Export Failed". You then can't do anything except exit. It appears to sever the connection to the server. You get the standard "contact the administrator" error when you try to do something (or even when you exit).
Is anyone else having this problem? Does anyone have any ideas how to go about figuring out a resolution to this isse? Any ideas on what is going on between Discoverer and GuardianEdge?
Thanks!
Jeff
OracleBI Discoverer 10g (10.1.2.3)
Oracle Business Intelligence Discoverer Plus 10g (10.1.2.55.26)
Discoverer Model - 10.1.2.55.26
Discoverer Server - 10.1.2.55.26
End User Layer - 5.1.1.0.0.0
End User Layer Library - 10.1.2.55.26
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bi
Java Virtual Machine:     Sun Microsystems Inc. 1.6.0_12
JVM Memory Available:     15758KB out of 38904KB
Operating System:     x86 Windows XP 5.1
Using secure connection
Using protocol:          RMI protocol over https transport

Hello,
Open the report up and add a sort to the ID field, CR will sort the matching row data with the id so when exported it too will be sorted and alined properly.
If you want to do this in code then post to the [.NET SDK forum|SAP Crystal Reports, version for Visual Studio;.
But PLEASE search first in forums and in our knowledge base, someone has likely already asked and an answer has been given.
Another place for lots of samples is here:
http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsSDKSampleApplications
Thanks
Don

Datamerge problems with images in pdf export

Hi
Trying to set up a datamerge file to create multi page spread documents with fields on different pages. Attempting to set it up so it's as automated as possible as there are up to 20 different merge documents needing to merge with up to 100 different csv records from the same file each week . The merge documents have different and repeated merge fields on most pages.
I've set it up so that the document has facing pages, and most pages have images spread across the whole of the spread. the pages preview fine, they are created ok when using 'Create Merged Document' although the page numbers continue from one document to another (another problem). but when I come to export to pdf, then the merge only shows the image on the left spread but on both left and right spread single pages, and the page numbers don't show the correct page numbers eg it will go p1 p2 p1 p2 etc all the way through the document instead of p1 p2 p3 - p20 etc. I don't want to have to merge first then pdf but can't understand why the images and page numbers are not showing correctly. Anyone shed some light on this please?
Many thanks

I have a simialar problem with the page numbers. I dont know the proper solution to this, but since I only work with a few records the following works OK for me right now.
What I do Is first set up for the data merge on the master page along with any object that have to be on every page. Until it is merged I only make the master page.
Then after it is merged I go and make any other edits to the individual pages. I dont know how to make it merge ONTO the pages you alread created.

Problem with losing quality in exporting FLV

First I should emphasize that I am new to Adobe's products, and am learning it on the fly as part of a intelligent tutoring system design project. So I apologize for my lack of technical knowledge in advance. Rest assured I have put much effort in attempting to solve this problem on my own and by referencing this forum and other web sources, but sadly with no success.
FYI, I am using the CS4 Master collection.
My question pertains to retaining the quality of my video once I export it to .flv format via Media Encoder from Premiere Pro. My main video source is an .flv file that i have imported into my media browser. Initially I ran into a problem with the importing because it did not recognize H264 as having any media, and so I had to convert to Sorenson format to get it to import successfully. But it seems to have imported just fine without any loss of quality in the workspace. So that isn't my main issue but perhaps it is related.
I am having major issues with losing quality upon export back to .flv format - which is the format I am required to use - the video is being imbedded within a larger program and so it needs to have a smallish file size. For the life of me I cannot figure out any combination of settings that works. If I select same as source then I end up with a video that is surrounded by black borders. This may because the workspace is larger than my imported file. I have attempted to enlarge it to fit the safe margins but it hasn't helped. If I resize my output video to 640 x 480 - which is what I want - I get a shrinked video with black borders. If I crop the input to what I want I just lose quality - but I lose quality either way. I really want to accomplish this without increasing the bit rate (and thus the file size). I have tried just about every setting available and I still lose the quality. Is this just inevitable? Is there a plugin that would help? From what I can it seems that Adobe has more problems dealing with .flv than with other video formats, but I haven't found anything that pertains to this issue specifically.
Otherwise does anyone know of any other programs that can edit .flv files and offers multiple video & audio tracks?
Thanks in advance. If anything needs clarification let me know.

Ah yes I left out that detail. My source video is 640 x 480 also so the output is not an increase in size.
This is different from my sequence settings. Which is 1440 x 1080 16:9 ratio. Pixel Aspect Ratio is HD anamorphic 1080 (1.333).
I am assuming that this needs to be changed but I can't figure out how to do that (sequence settings are greyed out). Should I just start a new project?

Bizarre problem with garbage on movie export

I am having a weird problem with exporting video from an iMovie '08 project.
You can see the video here: http://www.youtube.com/watch?v=McFnmpuSKGc
About 31 seconds in, the first problematic clip shows up. Do you see how the video from some clips gets shrunk to the lower right corner and the rest of the space is filled with garbage, while other clips display in the full window? This happens no matter which size or type I export/share to. The weird thing is, if I play the (non-exported) project within iMovie, even at full screen, it looks fine.
Knowing nothing about video, my first thought was, "maybe the videos are different sizes, and the ones with garbage around them were at a lower resolution than the videos without garbage around them. However, all of the original videos are from the same camera, and all are at 960x540 resolution, H.264 encoding, and the same bit rate - I checked each file by using Cmd-I in the Finder.
Do any iMovie experts have suggestions on how to fix this? Again, it looks fine when I play the project in iMovie, but it has this problem whenever I export or share it to another format.
Thanks!

Correct me if I'm wrong. What this lines does (if there isn't a space between the two single-quotes) is removing the string represented by xmlnsVal from the string xmlDoc. I've been using this method in some situations.
But I don't know why it won't work either. However, isn't it necessary to do conversion from CLOB to varchar2 before calling replace? Maybe the implicit conversion isn't so reliable. I've seen someone did the following:
-- clobvar is CLOB
-- stringvar is varchar2(4000)
stringvar := cast(clobvar as varchar2(4000)); -- not testedAfter that you can use stringvar in your replace function.
Or alternately, if exists in 9i, you can try the function regexp_replace() instead. Good luck.

Sound problem with QuickTime .dv files exported from iMovie ~ help please

Hi
I have been working for ages on an important project which is intended to wind-up as a numbered edition DVD, limited to 50 copies.
When I worked in iMovie HD 5 this NEW PROBLEM didn't arise: I did what I thought was the right thing and bought iLife '06, then upgraded from the Apple site, so now I am using iMovie HD 6.0.1, iDVD 6.0.1 and QuickTime Player 7.0.4.
I've designed my own menus and the procedure as most anyone will know [thanks iCreate magazine!] is...you have to 'export' (or now 'share') the iMovie to QuickTime (or with QuickTime) which produces a .dv file which you then drag-and-drop into iDVD.
I've got 4 of these .dv files for the start-up and some menus.
THE PROBLEM IS whereas the sound (it's actually music) has been faded out (in synch with the image) ~ in iMovie everything seems fine ~ but THE QUICKTIME .dv FILES HAVE AN ANNOYING LITTLE "FLARE-UP" OF MUSIC AT THE END OF THEM.
Imported into iDVD, in preview: sure enough! ~ you hear the annoying, untidy-sounding snips at the end.
It's ruining my project ~ please help, someone!

I am having the exact problem, it's a real show stopper.
I have tested hardware, software, media as below.
Tested on
1 Intel 17inch iMac
2 G4 AGP 450 + 1.2Ghz Model
Each have a fresh install of iLife 06 on
Each have been tested with different project files.
Differnet music files
The issue seems to be with apples iLife software to me.
I am on the phone to apple right now, they only surgest I create a new user as it generates new prefs, but the above test has already rulled out preference files!
Also rebuilding and reinstalling, but again the above test has rulled that out as the 3 machines were freshly built.
I have already upgraded my graphics card in my machine at home to sort out preview problems with iMovie, hopefully it's not going to be an expensive audio card aswell.
If any 1 can throw any light on this please do as apple support can't.
Regards
Paul

Problems with IC Web after export

This system is running in CRM 5.0, after that we made a import a system of 32 bits for a system 64 bits
We have a problems with some functionality in IC Web client, please help experts!!!
- Scroll bar, If I can use, I need to push double click
- Catalog of countries, I can't choose nothing, in the page display permission denied
- Catalog of states, I can't choose nothing, in the page display permission denied
Thanks !!!

I tried many Mozilla-based browsers (Mozilla, Netscape, FireFox) - all the same error with ...no properties ...;
I even can't see any IC Web Client window to check what is the situation with _htmlbMessageBar.
IE 6.0 SP1 and SP2 shows main screen but fails when start scripts.

Problem with FLVPlayback and component

First of all I had problem with control component. they are not working so i just named that ppo and change the visibility to false to get rid of problem!
ppo.visible=false;
Question1
(is there anyway to solve the problem? I mean to match the controlbar with screen of FLVplayer.)
Question2
what is the difference btw Flvplayback and FLVplayback 2.5 ?
Question3
whenever I click in btn1 it plays the flv.but sometimes it has no action so i click again and suddenly it plays the 001.flv twice and simultanously(even more than twice!)
how can I solve my problem ?
___________________Frame 1______________
import fl.video.*;
import flash.events.MouseEvent;
var myVideo:FLVPlayback = new FLVPlayback();
control.visible=false;
myVideo.x = 115;
myVideo.y = -10;
myVideo.skinBackgroundColor = 0x333333;
myVideo.skinAutoHide=true;
myVideo.skinFadeTime=300;
addChild(myVideo);
btn1.addEventListener(MouseEvent.CLICK , c1);
function c1(e:MouseEvent):void
myVideo.source = '001.flv';
Question 4 : I want to jump to another frame and start another flv but I want to stop previous flv. and again add myVideo2 to stage like frame 1 pattern. Is it true ? is there any better way to do this ?
---------------------------frame5-----------------------
import fl.video.*;
import flash.events.MouseEvent;
var myVideo2:FLVPlayback = new FLVPlayback();
control2.visible=false;
myVideo2.x = 115;
myVideo2.y = -10;
myVideo2.skinBackgroundColor = 0x333333;
myVideo2.skinAutoHide=true;
myVideo2.skinFadeTime=300;
addChild(myVideo2);
btn2.addEventListener(MouseEvent.CLICK , c2);
function c2(e:MouseEvent):void
myVideo2.source = '002.flv';
thank you in advanced..

Question1
(is there anyway to solve the problem? I mean to match the controlbar with screen of FLVplayer.)
what are you calling the '..controlbar' and what are you calling the '...control component'?
Question2
what is the difference btw Flvplayback and FLVplayback 2.5 ?
2.5 has more features, http://blogs.adobe.com/ktowes/2009/05/announcing_dvrcast_and_flvplay.html
Question3
whenever I click in btn1 it plays the flv.but sometimes it has no action so i click again and suddenly it plays the 001.flv twice and simultanously(even more than twice!)
how can I solve my problem ?
remove the click listener so you can only click once. then you may need to wait if testing online.
___________________Frame 1______________
import fl.video.*;
import flash.events.MouseEvent;
var myVideo:FLVPlayback = new FLVPlayback();
control.visible=false;
myVideo.x = 115;
myVideo.y = -10;
myVideo.skinBackgroundColor = 0x333333;
myVideo.skinAutoHide=true;
myVideo.skinFadeTime=300;
addChild(myVideo);
btn1.addEventListener(MouseEvent.CLICK , c1);
function c1(e:MouseEvent):void
myVideo.source = '001.flv';
Question 4 : I want to jump to another frame and start another flv but I want to stop previous flv. and again add myVideo2 to stage like frame 1 pattern. Is it true ? is there any better way to do this ?
---------------------------frame5-----------------------
import fl.video.*;
import flash.events.MouseEvent;
myVideo.stop();
removeChild(myVideo);
myVideo=null;
var myVideo2:FLVPlayback = new FLVPlayback();
control2.visible=false;
myVideo2.x = 115;
myVideo2.y = -10;
myVideo2.skinBackgroundColor = 0x333333;
myVideo2.skinAutoHide=true;
myVideo2.skinFadeTime=300;
addChild(myVideo2);
btn2.addEventListener(MouseEvent.CLICK , c2);
function c2(e:MouseEvent):void
myVideo2.source = '002.flv';

Problem with Two tab canvases in a form

Hi Experts,
I am working on Oracle forms 10g (OS: Windows7) from last 1 year. I have got a requirement to create a form with one tab canvas CAN_TAB (with 2 tab pages) in main page and a pop up tab canvas ASN_SPLIT_TAB(with 2 tab pages). Now the problem is whenever we click on tabs it will fire WHEN-TAB-PAGE-CHANGED trigger and executes the complete code. As a result even if i click a tab page in CAN_TAB canvas it will fire for ASN_SPLIT_CANVAS as well. Check the below code (WHEN-TAB-PAGE-CHANGED). Now i have to differentiate between two tab canvases so that i can use IF-ELSE statement to overcome this problem. Please share your useful comments.
BEGIN
Lv_Toppage := Upper(Get_canvas_property('CAN_TAB',Topmost_Tab_page));
if Lv_Toppage = 'LINES' THEN
go_item('shipment_summary.shipment_reference');
show_view('CAN_LINES');
show_view('CAN_SCROLL');
elsif Lv_Toppage = 'ATTRIBUTES' THEN
go_item('shipment_summary.shipment_reference');
show_view('CAN_ATT' );
elsif Lv_Toppage = 'AUDIT' THEN
go_item('shipment_summary.confirmedby');
show_view('AUDIT');
end if;
Lv_Toppage := Upper(Get_canvas_property('ASN_SPLIT_TAB',Topmost_Tab_page));
IF Lv_Toppage = 'INVOICE_SPLIT' THEN
show_view('ASN_SPLIT_STACK');
go_item('ASN_INBOUND_CATEGORY_SUMMARY.brand_representitive');
ELSIF Lv_Toppage = 'SUPPLIER' THEN
go_item('CONTROL.cancel_but');
END IF;
hide_view('ASN_SPLIT_STACK');
END;

Thanks Craig. You made it happen..!! Below code is working fine for me.
IF :SYSTEM.tab_new_page = 'LINES' THEN
go_item('shipment_summary.shipment_reference');
show_view('CAN_LINES');
show_view('CAN_SCROLL');
ELSIF :SYSTEM.tab_new_page = 'ATTRIBUTES' THEN
go_item('shipment_summary.shipment_reference');
show_view('CAN_ATT' );
ELSIF :SYSTEM.tab_new_page = 'INVOICE_SPLIT' THEN
END IF;

I'm having a problem with unresponsive tabs after deleting localstore.rdf

After the update to 4.0 b7, I had a problem with my toolbar resetting, which I (somewhat) fixed by deleting localstore.rdf. Now, however, my tabs are unresponsive when clicked, and Firefox is essentially locked onto the first tab. Ideas?

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]

Problems with Exporting Tabs - Component Export

Similar Messages

Maybe you are looking for