Problems with Grid View Selections

I'm having problems with multiple selections in the grid view. I can select multiple files, but as soon as I click on one of the selected files, it deslects all the other files and only highlights the one I clicked on. I'm also unable to drag any file or files to a Collection or Publish Services. This has just recently cropped up. I'm using LR 3.2 and have even reinstalled the software from 3.0 but I'm still having the same issue. Any ideas?

Wow. I feel silly that it could have been such a simple thing. Seems to have taken care of the problem. I must not have been paying attention to where I was clicking. Thanks!

Similar Messages

Problem with Materialized Views after an export

Hi @ everybody,
At an Oracle 11g R2 (11.2.0.3.0) instance, all actual CPU's/SPU's are installed, on a Red Hat 6 Machine i have a problem with Materialized Views from a schema, which i have exportet from an old database machine on Oracle 10g (10.2.0.1.0) to the new machine.
I've exportet with the old exp and imported with imp, because i know, that i get some strange errors because of the materialized views when i'm using the new expdp and impdp tools.
At the old machine the materialized views are so programmed, that they get an update of data at a defined time like this:
START WITH TRUNC(SYSDATE) + 21/24
      NEXT SYSDATE+1
...But after the export this "update function" of the materialized view is not available. So i have deleted that views and recreated them with the START WITH parameters. So now they are running.
But why do i have this problem?
Is this "START WITH" somewhere written as a job or so in, for example, DBMS_SCHEDULER or something else? So i had forgotten to export these jobs or where is that defined?
Is this a bug?
Thanks for answers and help!
Best regards,
David

I can't remember the error of expdp/impdp. That is some days ago, i have to rebuild this.
I think in my scenario for the import i don't need the TABLE_EXISTS_ACTION, because by importing at the new server i've just createt the naked tablespace for the data and the users, not more. So he didn't has something to overwrite.
And i have to tell you: i'm just the dbA. The desining of the tables and materialized views is many years ago by installing the old server. I'm just to young in my company to know about the design of the instance and why it was designed so.
Anyway: my problem is, that after the import of the schemas to a new server the "START WITH" option in the materialized views is not there anymore and i just want to why so i can think about a solution for that and create it with the database designers of my company.
EDIT: And here are the SQL Statements for creating the Materialized Views:
First, at the OLD Server (Oracle 10g 10.2.0.1.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS"
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)And here the at the NEW Server (Oracle 11g R2 11.2.0.3.0)
CREATE MATERIALIZED VIEW "DUPONT_CCG2_P"."PR_PRODUCT_ITEMS" ("CLIENT_ID", "ILN_USER", "EAN", "CODE", "ARTICLE_TEXT", "LANG_CODE", "LANR", "OLD_LANR", "ITEM_BY_NO", "UOM_UNIT", "PRICE_UOM", "PRICE", "CURRENCY", "PRICE_QTY", "SALES_UNIT", "START_DATE", "END_DATE", "UPDATED_AT")
ORGANIZATION HEAP PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255
NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1
BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)
TABLESPACE "DUPONT_14523"
BUILD IMMEDIATE
USING INDEX
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1
USING DEFAULT LOCAL ROLLBACK SEGMENT
USING ENFORCED CONSTRAINTS DISABLE QUERY REWRITE
AS (SELECT DISTINCT
      PR_CUSTOMER_MASTER_DATA.CLIENT_ID,
      PR_CUSTOMER_MASTER_DATA.ILN_USER,
      PR_ARTICLE.EAN,
      PR_ARTICLE.CODE,
      PR_USED_ARTICLE_TEXT.ARTICLE_TEXT,
      PR_USED_ARTICLE_TEXT.LANG_CODE,
      PR_ARTICLE.SUP_ITEM_NO,
      PR_ARTICLE.OLD_ITEM_NO,
      PR_COMPANY_ITEM_MATCH.ITEM_BY_NO,
      PR_COMPANY_ITEM_MATCH.UOM_UNIT,
      PR_COMPANY_ITEM_MATCH.PRICE_UOM,
      PR_COMPANY_ITEM_MATCH.PRICE,
      PR_COMPANY_ITEM_MATCH.CURRENCY,
      PR_COMPANY_ITEM_MATCH.PRICE_QTY,
      PR_COMPANY_ITEM_MATCH.SALES_UNIT,
      PR_COMPANY_ITEM_MATCH.START_DATE,
      PR_COMPANY_ITEM_MATCH.END_DATE,
      PR_ARTICLE.UPDATED_AT
        FROM PR_ARTICLE, PR_COMPANY_ITEM_MATCH, PR_USED_ARTICLE_TEXT, PR_CUSTOMER_MASTER_DATA, PR_ADDRESS
        WHERE PR_ADDRESS.ORDER_TYPE='REP'
      AND PR_CUSTOMER_MASTER_DATA.ILN_USER=PR_ADDRESS.ILN_USER
      AND PR_COMPANY_ITEM_MATCH.ILN_USER=PR_ADDRESS.ILN_LINK
      AND PR_CUSTOMER_MASTER_DATA.SALES_ORG=PR_COMPANY_ITEM_MATCH.SALES_ORG
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_COMPANY_ITEM_MATCH.CLIENT_ID
      AND PR_CUSTOMER_MASTER_DATA.CLIENT_ID=PR_ADDRESS.CLIENT_ID
      AND PR_ARTICLE.SUP_ITEM_NO=PR_COMPANY_ITEM_MATCH.SUP_ITEM_NO
      AND PR_COMPANY_ITEM_MATCH.SALES_ORG=PR_USED_ARTICLE_TEXT.SALES_ORG
      AND PR_ARTICLE.SUP_ITEM_NO=PR_USED_ARTICLE_TEXT.SUP_ITEM_NO
      AND PR_CUSTOMER_MASTER_DATA.LANG_CODE=PR_USED_ARTICLE_TEXT.LANG_CODE
      AND ( PR_COMPANY_ITEM_MATCH.END_DATE IS NULL OR to_date(PR_COMPANY_ITEM_MATCH.END_DATE,'YYYYMMDD') - sysdate > 0)
      AND ( PR_COMPANY_ITEM_MATCH.START_DATE IS NULL OR sysdate - to_date(PR_COMPANY_ITEM_MATCH.START_DATE,'YYYYMMDD') > 0)
)The own differences i can see is at the "header". In the new one is the NOCOMPRESS LOGGING Option and in the first line the code has the columns diretcly defined.
But, i think, for my problem this line is determining:
REFRESH COMPLETE ON DEMAND START WITH sysdate+0 NEXT SYSDATE+1And this line is the same at both server.
Edited by: David_Pasternak on 12.04.2013 00:06

Problem with a view in XK01 transaction

Hi All,
I am working on upload conversion for Vendor Master. While doing conversion, i am getting a problem with a Contact person view in XK01 transaction. In contact person view the telephone field column sometimes allowing to add data ,sometimes it's not allowing data which results an error in conversion program saying that the telephone field in not an input field. I don't know why the view is showing the telephone field like that.
Can any one suggest the solution for this problem. I know this is configuration problem with a view but i posted in ABAP forums.
Thanks

Hi Ben,
I assume that you are writing a BDC program to upload contact person information. If so, you are trying to populate a table control here. Please check to see if you are calculating the index to assign values to the correct rows.
if you are calculating index in your program then i think it should be configuration problem as you said.
Thanks,
Ganesh.

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

F-32 : Problem with Open Item selection

Hi,
We have a strange problem with open Item selection for customer clearing in t-code F-32
In My QA system
if I input spl GL indicator ="*" and uncheck Normal OI tick,
the system selects all open items,
(those with spl GL indicator and those without spl GL indicator)
In My Dev system
If I input spl GL indicator ="*" and uncheck Normal OI tick
the system does not select any open items,
Please let me know which setting controls this behaviour ?
Regards
Sachin

Hello,
Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
In F-32, there is no value like *
You need to input right Special GL Indicator. "*" will not work here.
I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
Please DOUBLE CHECK whether you have unticked normal transaction.
Regards,
Ravi

Problems with Street View

new street view from new google map release shows black screen

I'm having similar problems with Street View on openSUSE. For the time being you can try to switch back to the classic Google Maps.
https://support.google.com/maps/answer/3045828?hl=en&ref_topic=3093612

HT1338 Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.

Problem with MAIL, when select names that start with "E" the mail freeze. Can't fix it.

Now I checked the materials that I got from AT&T Yahoo and
port 25 is used as the outgoing mail port, 110 for incoming.
This is for the POP type account provided by AT&T, not necessarily for an email account and SMTP server not provided by AT&T.
Sounds like AT&T blocks using an SMTP server that is outside of their network or not provided by AT&T on Port 25.
Try the following first.
Go to Mail > Preferences > Accounts and under the Account Information tab for your .Mac account preferences at the SMTP server selection, select the Server Settings button below for the .Mac SMTP server.
Enter 587 in place of 25 in the Server Port field and when finished, select OK to save the changed setting.
If this doesn't work, we will go to plan B.

Problem with align and Selection Tool.

This is a weird problem which I cannot explain at all.
I am using AI CS3 with Windows XP.
I am having this completely random problem with the selection tool and align pallette I cannot explain.
I have a group of objects and groups of objects I am trying to use the align pallette on.
Sometimes when I select all of the items I want to align, either by shift-clicking each one, or by drag-selecting them I am getting a random behavior where sometimes the align button will move all of the objects COMPLETELY off of the artboard, all the way to the edge of the working area and beyond into the grey area you cannot see.
Normally, this would be caused by a stray point somewhere way off-screen or some other cleanup oriented thing on my part. However in this case, the behavior is random and does not happen every time I hit the align button.
Sometimes it takes items within my grouped objects (lines of text) and moves THEM completely off the work area, leaving the other items in the groups in place. Sometimes the bounding box when I drag-select the items will stretch extremely far off of the work area.
I have even dragged the extra large bounding box, bringing the edge that was once way off screen onto the work area, in outline view, in hopes of finding the stray point or object that could be causing this. However NOTHING appears that can be causing the align to throw all of my objects off-screen.
The random nature of this behavior and the way it sometimes affects my text objects inside of groups leads me to believe it is a program bug and nothing I am doing.
The behavior takes place regardless if I select by dragging or by shift-clicking, and is happening in more than one file, also randomly.
Also, choosing "align to art board" vs. "align to crop area" does nothing to change this behavior.
It is quite irritating. I've been using illustrator since v.88 so I have enough experience to know this is not normal.
Any help with this one would be greatly appreciated.

When this behaviour occurs, are perhaps guides included in your selection?

Lightroom 4.2 - Experiencing problems with images viewed on 2nd monitor

Hi All,
This problem seems to have started with my updating from 4.1 to 4.2. I have my second monitor set as Loupe - Normal and Fit. As I crop an image on my main monitor, the 2nd monitor view does not always change to the cropped view. If I switch to a different photo and then back to the one I just cropped, the 2nd monitor view will then show the cropped image, but it is almost always blurry. Sometimes I can click the image in the 2nd monitor view to change to a 1:1 view and it will look sharp, and then click again back to Fit and then it too will be sharp. Other times I get a message in the 2nd monitor view that says "no image selected" and bouncing back and forth between a different image will correct this.
This all started off with the majority, but not all cropped images showing as blurred and progressed to what I have described above. I seriously though I had a focus problem with my camera!
Is anyone else experinecing this since updating? Suggestions?
Below is the suggested information to provide...
What version of Lightroom? 4.2
Have you installed the recent updates? Yes, 4.2
What operating system? Windows 7 Ultimate 64 bit
What kind(s) of image file(s)? All images are converted to .dng upon import
If you are getting error message(s), what is the full text of the error message(s)? No error messages.
What were you doing when the problem occurred? I am in the develop module cropping images etc.
What other software are you running? Silver Efex Pro 2, but I have had that installed in many prior versions of Lightroom
Tell us about your computer hardware. How much RAM is installed? 32 GB - Yes, I know - overkill...
How much free space is on your system (C:) drive? 119 GB of 223 GB of my solid state drive c:\
Has this ever worked before? Yes
If so, do you recall any changes you made to Lightroom, such as adding Plug-ins, presets, etc.? No other changes other than updating to 4.2
Did you make any changes to your system, such as updating hardware, printers or drivers, or installing/uninstalling any programs? No, no other changes.
Thanks!

Same problem. Not a soloution, but this may be relevant.
http://forums.adobe.com/message/4782916#4782916
Alan

Sorting problems in Grid View

Hi, I'm having a bit of a sorting problem when it comes to an artist with name variations. The example I'm going to use is DJ Tiesto.
There are album I have where he is credited as DJ Tiesto, and others where he is simply Tiesto.
In the end, I'd like these albums sorted chronologically under one name (say DJ Tiesto), while still preserving and showing the proper artist name for each album. I have it set to sort by "Album by Year", which is working fine.
The major problem I am having is that I can't get it to display properly across all iTunes viewing methods: List mode, Grid mode, and Coverflow.
I've tried leaving the Artist field alone, and changing the Sort Artist field to "DJ Tiesto" for all songs, and that almost works:
-List mode groups them all under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Grid mode sorted by Album groups them all under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Coverflow sorts them all in chronological order, while showing each albums Artist as the correct artist name.
Problem is, Grid mode sorted by ARTIST creates two separate artists! Some for DJ Tiesto and some for Tiesto!
To correct this I tried changing the Album Artist field for all songs to "DJ Tiesto", which solved that problem but created a bunch of new ones:
-List mode is still correctly grouping them under "DJ Tiesto", while showing each albums Artist as the correct artist name.
-Grid mode sorted by Album is still correctly grouping them under "DJ Tiesto", *however now it is not displaying the correct Artist name for each album!*
-Grid mode sorted by Artist is now grouping them all under "DJ Tiesto", *however it is not displaying the correct Artist name for each album!*
-Coverflow is sorting them in correct chronological order, *however it as well is not displaying the correct Artist name for each album!*
Using the Album Artist tag has created more problems that it has solved! Is there anyone who knows a way to achieve what I am trying to do? I have tried seemingly every option I can and have still not found a way to do this!!
Thanks!

My own method of working involves renaming the files upon import to:
i "shotdate_sequencenumber"
Files are therefore typically named
b 2007-11-25_001
etc.
This way, sorting by Filename automatically sorts by Date by default. And it wouldn't even matter if you added a descriptive text in between the date and number (
b 2007-11-25_Scotland_001

Problem with tree view

Hello and good morning,
i´ve got a problem with a tree view in one of our web dynpro applications.
The tree view act´s as a menu. For example:
the highest element is: personal
If you open personal you see:
recruiting
payment
and so on...
Our Problem is...
You can open the tree element by clicking on the little box left from the tree-element text.But we want that the tree-element is also "line-sensitieve". This means, the next elements should not only appear by clicking the box, also by clicking simply the line.
Is this possible.
PS: Sorry for this bad application, but i don´t know how to explain it better

method ONACTIONTOGGLE .
data:
    Elem_Context                        type ref to If_Wd_Context_Element,
    Stru_Context                        type If_Menu_Tree=>Element_Context ,
    Item_IS_OPEN                        like Stru_Context-IS_OPEN.
data parent_key type string.
    data children_loaded type wdy_boolean.
data x_node type ref to IF_WD_CONTEXT_NODE.
* get context via lead selection
Elem_Context = wd_Context->get_Element( ).
* get single attribute
Elem_Context->get_Attribute(
    exporting
      Name = `IS_OPEN`
    importing
      Value = Item_Is_Open ).
if Item_Is_Open = abap_true.
    Item_Is_Open = abap_false.
else.
    Item_Is_Open = abap_true.
endif.
Elem_Context->set_Attribute(
exporting
    Name = `IS_OPEN`
    Value = Item_Is_Open ).
endmethod.

Problem with MATERIALIZED VIEW (snapshot)

Hi,
I've any problem with creating MATERIALIZED VIEW (snapshot)
My table is ROOMS:
SQL> DESC ROOMS
Name Null? Type
LS_ID VARCHAR2(32)
BL_ID NOT NULL VARCHAR2(32) PRIMARY KEY1
FL_ID NOT NULL VARCHAR2(4) PRIMARY KEY2
RM_ID NOT NULL VARCHAR2(8) PRIMARY KEY3
SITE_ID VARCHAR2(32)
SQL> SELECT COUNT(*)
2 FROM ROOMS;
COUNT(*)
203973
SQL> SELECT COUNT (TOT)
2 FROM (SELECT COUNT(*) TOT, LS_ID, SITE_ID
3 FROM ROOMS
4 GROUP BY LS_ID, SITE_ID);
COUNT(TOT)
11673
I'd like to create one MATERIALIZED VIEW that refresh every 30 seconds when I insert, update or delete on ROOMS table.
I tried this:
CREATE MATERIALIZED VIEW ROOMS_SNAP
BUILD IMMEDIATE
REFRESH complete
START WITH to_date(sysdate,'dd/mm/yyyy hh24:mi:ss')
NEXT sysdate + 30/86400
disable QUERY REWRITE
AS
SELECT LS_ID, SITE_ID
FROM ROOMS
GROUP BY LS_ID, SITE_ID
but when I insert, update or delete one record on ROOMS table, ROOMS_SNAP not refresh.
What I wrong?
How Can I write MATERIALIZED VIEW to maintain synchronization
between ROOMS_SNAP AND LS_ID, SITE_ID by ROOMS?
Thanks

Try this way:
SQL> SHOW PARAMETER JOB
NAME                                 TYPE        VALUE
job_queue_processes                  integer     0
SQL> ALTER SYSTEM SET JOB_QUEUE_PROCESSES=20 SCOPE=MEMORY;
SQL> create materialized view log on emp tablespace jam_ts
2 with rowid, primary key;
Materialized view log created.
SQL> create materialized view emp_mat
2 tablespace jam_ts
3 refresh fast start with sysdate
4 next sysdate + interval '15' second as
5 select * from emp where deptno=30;
Materialized view created.
SQL> update emp
2 set     ename=lower(ename)
3 where   deptno=30;
6 rows updated.
SQL> commit;
Commit complete.
---"After 15 seconds it will be refreshed automatically...."
SQL> select * from emp_mat;
EMPNO ENAME      JOB           MGR HIREDATE      SAL    COMM DEPTNO
   7499 allen      SALESMAN     7698 20-FEB-81    1600     300      30
   7521 ward       SALESMAN     7698 22-FEB-81    1250     500      30
   7654 martin     SALESMAN     7698 28-SEP-81    1250    1400      30
   7698 blake      MANAGER      7839 01-MAY-81    2850              30
   7844 turner     SALESMAN     7698 08-SEP-81    1500       0      30
   7900 james      CLERK        7698 03-DEC-81     950              30
6 rows selected.Message was edited by:
Jameel

Problem with quick mask selection appearence

Hi,
I am having a problem with the quick mask view (red) selection. When i press the \ key to see the selection i get a red rectangle in a random place of the screen instead of the red selection. Before the last update i had no such problem. Any solution to this ?
I am working on 64bit cc version Win8

No I tried to disable the Graphics Processor but no result. It is as it tries to aply the mask but crushes. if i leave it for about 10 sec photoshop crushes also...

Problem with focus and selecting text in jtextfield

I have problem with jtexfield. I know that solution will be very simple but I can't figure it out.
This is simplified version of situation:
I have a jframe, jtextfield and jbutton. User can put numbers (0-10000) separated with commas to textfield and save those numbers by pressing jbutton.
When jbutton is pressed I have a validator which checks that jtextfield contains only numbers and commas. If validator sees that there are invalid characters, a messagebox is launched which tells to user whats wrong.
Now comes the tricky part.
When user presses ok from messagebox, jtextfield should select the character which validator said was invalid so that user can replace it by pressing a number or comma.
I have the invalid character, but how can you get the focus to jtextfield and select only the character which was invalid?
I tried requestFocus(), but it selected whole text in jtextfield and after that command I couldn't set selected text. I tried with commands setSelectionStart(int), setSelectionEnd(int) and select(int,int).
Then I tried to use Caret and select text with that. It selected the character I wanted, but the focus wasn't really there because it didn't have keyFocus (or something like that).
Is there a simple way of doing this?

textField.requestFocusInWindow();
textField.select(...);The above should work, although read the API on the select(...) method for the newer recommended approach on how to do selection.
If you need further help then you need to create a "Short, Self Contained, Compilable and Executable, Example Program (SSCCE)",
see http://homepage1.nifty.com/algafield/sscce.html,
that demonstrates the incorrect behaviour, because I can't guess exactly what you are doing based on the information provided.
Don't forget to use the "Code Formatting Tags",
see http://forum.java.sun.com/help.jspa?sec=formatting,
so the posted code retains its original formatting.

Problem with 2 View Objects based on One Entity -Probably a Bug in ADF BC

Hi
I am using JDeveloper 10.1.3(SU5) and adf faces and ADF BC and to explain my problem I use HR schema.
First, I created 2 view objects based on countries table named as TestView1 and TestView2. I set TestView1 query where clause to region_id=1 and TestView2 query where clause to region_id!=1 in the view object editor and then I created 2 separated form on these 2 view objects by dragging and dropping from data control palette.
Now when I insert a record in the form based on TestView1 with region_id set to 1 and commit the record and go to the next form I can see the record in the second form which is completely wrong since it is against the where clause statement of the second form.
I am really confused and the situation is very wired and it seems to me something like bug in adf bc.Am I right.Is there any work around or solution for solving this problem.
Any help would be highly appreciated.
Best Regards,
Navid

Dear Frank,
Thank you very much for your quick response.
Reading your helpful comments now I have some questions:
1- I have commited the record in the database so shouldn't the query of view objects be re-queried?
2- We try to use ClearVOCaches (entity_name,false) in afterCommit of the base entity object but unfortunately it does not work correctly. after that,We got root app module and used findViewObject method to find all the view of that entity (we have found them by using name not automaticlly) and called executeQuery of all views. From my point of view it has 2 big disadvantages. First suppose that this entity is an important entity and 4 or 5 viow objects are based on it. Now, For inserting one record we should re-execute 4 or 5 view which I think makes some performance issues. Besides, If during the development one programmer add a new view object based on this entity and don't add the executeQuery in the afterCommit for this view, again we have the same problem. Isn't there at least a way that automatically refresh all related view objects however the performance issue still exists.
3- You mentioned that this issue is handled in the developer guide. Could you kindly give me a refrence which developer guide you mean and which section I should read to overcome this problem.(I have ADF Developer's Guide for Forms/4GL Developer's Guide , however I search for clearVOCaches and surprisingly nothing was found!!!)
4- Could you please give me some hints that from your point of view what is the best method to solve this problem with minimum performance effect.
Any comment would be of some great help.
Thanks in advance,
Navid

Problems with Grid View Selections

Similar Messages

Maybe you are looking for