Problems with hierarchy of materials

Hi experts,
I have a problem. I am loading the model of sales from the Business Content, I loaded the cube 0SD_C03 very good, with the Infosources: 2LIS_01_S260, 2LIS_01_S261, 2LIS_01_S262 and 2LIS_01_S262. This I could do it without problems. Then I began to load the master data of infoobjets and them I could even load well, the hierarchy of the materials (I believe that all the masterful data). Now in the BEx, when I want to execute one query that it contains the hierarchy of materials, the BEX shows error messages to me that say: "Hierarchy 200 00000000 is not available for Material InfoObject 0". I reviewed the hierarchy of materials and in the Infopackage has a green state. Infosource that I used is 0MATERIAL_LPRH_HIER and 0MATERIAL_LKLS_HIER. I need urgent aid

Hi Leonel,
Did you run the attribute hierarchy change run? In RSA1 > Tools > Apply Hierarchy/ Attribute Change. Then Re log into BEx and try again.
Hope this helps...

Similar Messages

Data slice inconsistency problem with hierarchy nodes

Hi Experts,
We want to lock planning tables from function. We create the appropriate data slices but there are problems with (material group) hierarchy nodes.
If I give the node as input variable to the function it causes inconsistency in the data slice. If I choose and add this node to the lock in modeler, the problem is the same.
We are using the following variables to create a data slice:
0VERSION
0VTYTYPE
0COMP_CODE
ZGRMAT (developed material group)
Z_YEARCR (developed yera created)
The problem also exist if I set an another type of node e.g. destination country (0RECIPCNTRY) instead of material group.
For me, the problem seems to be generic.
Do you have any idea?
Many thanks in advance
Peter

There is a note related to this proble:
Note 1070608 - Lowflag field is not valid
The implementation of this note resolves the problem.
Peter

Problem with hierarchy variable while displaying query in Portal

Hi,
I came up with an problem with a query in the portal. The problem is :
I have one query which is displayed in the portal. The Query has hierarchial selection criteria. I am executing the same query using analyzer. Its taking the variable from the selection and displaying it on the analyzer. I have used the option to " display the query on web " from the BEX query designer. From there its opening and displaying the results with the given selection criteria.
Where as when i open the query seperately in portal, its not displaying the results.
I came to know from one of my colleague that the porblem is with the Web item and the hierarchial variable declared in WAD was different from the variable declared in the BEX Query designer.
I never Worked with WAD. I tried finding out the variable definition. But i was unable to find out where the Hierarchial variable was defined.
Please help me out regarding the same.

The problem is sovled.
Poornima.

Problems with hierarchy in WEB Ex

Hi All,
I am having a problem with Web based queries. When we want to select hierarchy only the description of hierarchy is visible.
Is it possible to view technical name as well.
which can be selected to view a perticular hierarchy.
I promise to award the points if my problem is sorted.
Thanks,
Kirk

hi kirk,
The following SAP help docs shud solve ur issue:
for defining new queries:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a5625e09411d2acb90000e829fbfe/content.htm
for restricting characteristics:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a563fe09411d2acb90000e829fbfe/content.htm
for restricting characteristics in hierarchies:
http://help.sap.com/saphelp_nw04/helpdata/en/83/096d399bd2046fe10000000a114084/content.htm
for selecting hierarchies:
http://help.sap.com/saphelp_nw04/helpdata/en/a7/3f7139d1f89a0ce10000000a114084/content.htm
for defining the selections:
http://help.sap.com/saphelp_nw04/helpdata/en/f1/0a564ce09411d2acb90000e829fbfe/content.htm
hope it helps, lemme know
shameem

Query problem with hierarchy filter

Hello everybody,
i have a problem with a BEx Query 3.5 on a BW 7.01-System. This query includes the cha cost category as free characteristic which is filtered on a node. When we execute this query everythin works correktly. When I now select a filter value in BEx fpr this char the formula value in the row does not change. When I drilldown on this char the correct data was shown. This problem occurs only with this hierarchy node. With other selected nodes this problem does not occur.
We have regenerated this query in rsrt but that don't fix this issue.
Has anybody an answer?

hello,
the problem is known. You may check whether implementing the following note solves the issue:
1434532
best regards,
Jerome

Problem with hierarchy

Hi,
I am running a query which time dependent hierarchies in it. The two hierarchies have two different time ranges. But when I ran a query which set a key date and choosed one of two hierarchies. The error happened. Error message "abort Hierarchy has been adjusted. start the query again". I tried again, the problem was still there.
Any ideas will really appreciated...points will be awarded..

Hi,
I am trying to see if attribute change run is going top be an issue. So I went to attribute change run and I checked the infoobject liast and hierarchy list and there is nothing there abut in the top HIERARCHY/ATTRIBUTE CHANGE RUNS I still see some of the rows saying Hierarchy attibute change run is scheduled with diffrent requests numbers.
Can anybody explain me?
Thanks much...

Problems with hierarchy display when using SAPBEXonRefresh

Dear all,
I would like to create dynamic logos in BEx Analyzer. It means I need to change the logo image depending on value of certain free characteristic ("LOGO_ID").
At the moment, I have achieved that logo pictures (6 in total) are swapped by adding VBA code to SAPBEXonRefresh.
Unfortunately hierarchy symbols become to act very strange. Basically there are two problems:
1. They are not refreshed after hierarchy compression; those hierarchy symbols which are outside of result area are not removed
2. Pressing symbols in order to expand/collapse hierarchy sometimes does not produce any effect.
Code is show bellow and here is brief explanation of it. First, we are searching for "LOGO_ID" string in document. One cell to the right is value which tells us what logo to make visible. There are six logo pictures in worksheet with names: "L1", "L2", "L3", "L4", "L5", "L6" and only one should be visible.
Problem seems to be in working with Shapes (logo pictures are Shapes) since hierarchy expand/collapse symbols are also of the same type.
Any ideas would be appreciated.
Sub SAPBEXonRefresh(queryID As String, resultArea As Range)
Call ShowLogo
End Sub
Sub ShowLogo1()
 Dim UniLogo As String
 Dim UniRange As Range
 Dim vaUnis As Variant
 If WorksheetFunction.CountIf(Cells, "LOGO_ID") = 0 Then
 Exit Sub
 End If
 Set UniRange = Cells.Find(What:="ID izvornog sustava", After:=[A1], LookIn:=xlFormulas, _
 LookAt:=xlPart, SearchOrder:=xlByColumns, _
 SearchDirection:=xlNext, MatchCase:=False)
 UniLogo = UniRange.Offset(0, 1).Value
 If UniLogo <> "" Then
 If ActiveSheet.Shapes(UniLogo).Visible = msoTrue Then
 Exit Sub
 End If
 End If
 vaUnis = VBA.Array("L1", "L2", "L3", "L4", "L5", "L6", )
 For i = 0 To 5
 ActiveSheet.Shapes(vaUnis(i)).Visible = msoFalse
 Next i
 If UniLogo <> "" Then
 ActiveSheet.Shapes(UniLogo).Visible = msoTrue
 End If
Kind regards, Josko.

Hi Josko,
Where do you have this problem 3.5 or 7.0 BexAnalyzer.
When ever heirarchy icons are created in BEx, respective hyperlink is assigned to each of them, Make sure that you dont manipulate with them,,
If you still have problem then create OSS message.
Regards,
Vinay

Problem with hierarchy change run in aggregates

Hi,
I have made changes in Cost center hierarchy (infact I have included 2 cost centers in a seperate node). After it I loaded hierarchy into BW through Process chain. Process chain uses Attribute/hierarchy change run process. Consequently Cost center hierarchy is loaded into BW successfully.
In Cost center master data, hierarchy table, i can see two new records for these added costcenters in Active status. It means hierarchy change has worked properly.
I have also read that hierarchy change run automatically reflects the changes in Aggregates, that are using Cost center info objects.
But my problem is I did not find new added cost centers in any aggregate using cost center info object. Though it should be taken care by Attribute/hierarchy change run.
Please suggest, if I make any change in source system hierarchy, then how and when it will impact aggregates ? How can I test that hierarchy change has impacted aggregates ?
Thanks and Regards
Saurabh

Hi Fede
Did you manage to solve your problem?
I have a similar situation where the technical ID of the hierarchy is set as default value for the hierarchy variable in the variable input screen.
I have noticed that if I un-check the option "Suppress 'Unassigned' Node" in the Hierarchy Attributes Settings in RSH1, then the default value is gone, but I would like to have it checked in order not to display the unassigned nodes for the end users.
Any help or comments on what you have done to overcome this problem would be jhighly appriciated.
Thanks.
Regards
Peter

Problems with hierarchy display of functional locations

Hello Experts,
I tried to buid a model whch displays the hierarchy of functional locations and followe all steps of the How-To Model SAP BI System Hierarchies in Visual Composer paper but it does not work as described.
When I mark the Line I want to drill down and click the drill down button after the refresh it shows only the single value of this line and it does not show the functional locations below. Clicking Drill up nothing moves.
For Drill down I used the following coding:
'FILTER_NODE_IOBJNM=@Functional_Location_key;FILTER_VALUE='&#ID[ACCXVU]@Functional_Location_key&';FILTER_COLLAPSE= ;FILTER_IOBJNM=0PM_ORDER__0FUNCT_LOC;CMD_1=CMD%3DDRILL_TO_LEVEL%26LEVEL%3D2%26IOBJNM%3D0PM_ORDER__0FUNCT_LOC%26DATA_PROVIDER%3DDP;'
For drill up I used the coding:
'CMD_1=CMD%3DDRILL_TO_LEVEL%26LEVEL%3D'&NSTR(#ID[ACCXVU]@Functional_Location_node_level,'B')&'%26IOBJNM%3D0PM_ORDER__0FUNCT_LOC%26DATA_PROVIDER%3DDP;'
Any suggestions?
Thanks a lot in advance
Kind regards
Lutz Knabel

Hello Prachi,
thanks for your tip, but that does not work either.
Drilling down either does not show anything (empty result on some lines) and some only show one line of the same Functional location I have selected.
Drill up only works when the previous drill down resulted in a empty list. If the result has one entry you are locked and you cannot jump back.
I have collected some screenshots to demonstrate my problem which I would like to provide to you, but I do not have your mail address.
My Visual composer Version is 700.10.0027.
I guess SP is 0027, if not please advise how to find out.
Thanks again. Kind regards
Lutz Knabel
E-Mail: [email protected]

Issue with Hierarchy Navigator

Hi there,
we have some problem with Hierarchy Navigator (EP 3.6).
We installed and configured Hierarchy Navigator (EP 3.6) as explained in Oracle documentation.
We created a Trade Spec "A" > We run Hierarchy Nav > System shows us one only row with the Trade >> OK
We linked a Material Output "B" (External Product) and its context in Related Specs Tab > We run Hierarchy Nav > System shows us:
     1 - The message “This hierarchy has recently changed. An accurate hierarchy should be available in approximately 1 minute(s).”
     2 - Trade “A” and the linked Material “B”
     3 - Formulation does not appear
After 1 minutes System shows us the message: “An accurate hierarchy is now available, Refresh to see the latest hierarchy.”
We click on Refresh button > System shows us:
     1 - The Trade “A” only again
     2 - Neither Material nor Formulation appear
Do we missing something?
I hope my question is clear, if not please do not hesitate to contact me.
Thank you very much.
Best regards,
Stefano

Sounds like two different situations.   Here are some tips:
1. Context has to be selected with the material associated to the trade for the formulation to appear in the hierarchy navigator.
2. In your last example, it sounds like a change was made to the hierarchy. Any change to the hierarchy will cause that message. For example, if you changed a packaging spec or selected context. The system will only show one level of the hierarchy while it's being updated.   I would need more information to know of you found a bug but it is possible. Seems like the material should have appeared though.

Problem in hierarchy variable

hi,
I am facing one problem with hierarchy variable , i created one hierarchy variable with ready for input , mandatory and customer exit as i need some values to be populated in the input screen and write the following exit
when 'ZHV_PCTR' .              IF i_step = 1 .
     clear l_s_range .
     l_s_range-low = 'TEST!'.
     L_S_RANGE-SIGN = 'I'.
     L_S_RANGE-OPT = 'EQ'.
      append l_s_range to e_t_range .
   endif .
but wen the input variable is coming its coming with all the values , even test1 is not appearing .
plz letme know wts happning rong .
thnx

Hello ,
Try this code
DATA: loc_var_range TYPE rrrangeexit,
      l_s_range     TYPE rsr_s_rangesid.
IF i_step = 1.
CASE i_vnam.
    WHEN 'TEST1'.
    CLEAR l_s_range.
     READ TABLE i_t_var_range
            INTO loc_var_range
                 WITH KEY
                 vnam = 'TEST1'.
        IF sy-subrc = 0.
           l_s_range-low = 'TEST1'.
           l_s_range-sign     = 'I'.
           l_s_range-opt      = 'EQ'.
           APPEND l_s_range TO e_t_range.
           l_s_range-low = 'TEST2'.
           l_s_range-sign     = 'I'.
           l_s_range-opt      = 'EQ'.
           APPEND l_s_range TO e_t_range.
    ENDCASE.
ENDIF.
Thanks,
Kishore

Problem with the hierarchial fields in a Purchase order xml report

Hi,
I am having a problem with the hierarchy problem. We are populating attribute 15 of a PO header. some times it can be null. FYI, we are using 11.5.10 instance where oracle supports direct PO template rather than having a rdf file.
And now in the xml report, if attribute15 of po header is not null then it is fine.
But if attribute15 is null, then the template is picking from the next available attribute15 that is from the po lines. As the line level group of "LINES" is between the "PO_DATA" (header group), hence the template is checking for next available attribute15.
Can any one please suggest how to design the template where we can make the template to check only for that tag at the header level group rather than the line level group tag?
Thank You in advance.
Regards,
Srinivas.

Hi
Incase you want to transfer attachements from SRM to R/3, then you try implementing the BADI in SRM side. The BADI which will help in this case is
BBP_CREATE_PO_BACK BADI.
Please read the standard SAP documentation of this BADI using SE18 Transaction, before making any code changes.
Few Important SAP OSS notes to refer in this case ->
Note 989184 - Transferred shopping cart with internal attachments
Note 550071 - FAQ: EBP - Shopping Cart
Note 916347 - Transfer shopping cart with internal attachments
Note 1001130 - FAQ - Attachment questions (Buyside)
Few useful links ->
http://help.sap.com/saphelp_srm50/helpdata/en/49/b32640632cea01e10000000a155106/frameset.htm
Re: Attachments to backend
Re: Document Attachments in Shopping Cart
Re: Attachment in SRM
Re: SRM Documents and Attachments
Re: Limit in Attachments of an item in Shopping Cart
Re: return delivery text from material document is not passed to SUS

Do let me know, incase you face any problems.
Regards
- Atul

Problem with services hierarchy and purchase order

Hi I'm in Srm 7 EHP8(classic scenario) and i have a problem with services hierarchies:
I create a Purchase requisition in ECC with the next structure:
1.Hier
1.1 Serv1
1.2 Serv2
1.3 Serv3
Then I upload this PR to SRM(I activated the BBP_EXTLOCALPO_BADI to change to the Extended-classic scenario to upload correctly the hierarchy)
and in the SOCO I only choose the position 1.1 Serv1 and create a purchase order.
The problem is the purchase order created in ECC contain all the services of the purchase requisition, not only the service I choose(1.1 Serv1) to create the purchase order, in SRM the purchase order is correct with only one position(1.1 Serv1)
Any Idea?.
Thanks for the help.

Hi,
I have the same problem, any new about that?
Rgs,
Pedro

Problems with package hierarchy

If i create a simple package hierarchy like this:
-trial
- trial.subTrial
and if i put an abstract class on trial, i cannot extend it on package subTrial (a strange error occur, saying that i'm not overriding the abstract methods, when in fact i am) . But if i put everything on the same package it's no problem!!
I don�t know if this is a problem of the IDE (i'm using netbeans), i tried with a very simple example, outside of the project, to see if it was a problem with my code, and the same errors occurred, or if it's some hierarchy concept i'm violating.
Does anyone knows anything about this?

Nop, that's not the case!! As i said, i made a project just to try this.
This is the code of the only 2 classes of the project:
package trial;
public abstract class Trial {
abstract void function1();
abstract void function2();
void function3(){
System.out.println("BLA");
} // End of Trial Class
package trial.subTrial;
import trial.Trial;
public class SubTrial extends Trial{
void function1(){}
void function2(){}
}// End of SubTrial Class

Problems with temporal hierarchy join in BI7.0

Hello,
I am using the new feature temporal hierarchy join which enables viewing historical data over a time-dependent hierarchy.
Now this works fine as long as the hierarchy is being used in rows or columns. However if I use a hierarchy node as a selection in a structure element, the temporal hierarchy join does not work properly.
Does anyone have an idea if this should be supported?
Thanks in andvance,
Patrick

Hi Jorge,
we have BI Patch 15. I tried to find out which notes were implemented to solve the Problem.
I'm not sure which note was the leading note, but following notes were implemented:
0001061525
0001055725
0001051170
0001042353
0001041760
0001040649
0001039979
0001038008
0001036536
0001029689
0001024554
0001009908
0001002662
0001010516
Since then there have been further notes concerning different problem with the temporal hierarchy join.
I hope these will help to solve the initial problem.
Regards,
Patrick

Problems with hierarchy of materials

Similar Messages

Maybe you are looking for