Problems with Imac 27" and Photoshop CS3 on Windows 7

Hi I have an Imac 27" running Windows 7 and Photoshop runs poorly and crashes quite often, has anyone else had this problem?
My Imac spec is :
Model Name:          iMac
Model Identifier:          iMac11,3
Processor Name:          Intel Core i5
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          4 GB
Thanks
Paul

While I don't have a newer iMac, run Windows or use PhotoShop... but I'd say that you need more than the stock 4GB of RAM to get fully up to speed.
Upgrade Apple iMac Memory & more – Easy Guide, Free Installation Videos.
Crucial Memory Upgrades for Macs - Apple Memory
I suggest adding 2 x 4GB modules to the existing 2 x 2GB modules and bring it up to 12GB, cause if you only upgrade to 8GB by adding 2 x 2GB and 8GB is not enough or you want more later, then that upgrade is a waste.
Dennis

Similar Messages

Airport problem with iMAC 27" and serious service support for indonesia

Hi all,
i can't seem to get any help from anywhere else. so i try to post it here.
i tried to call the apple store (indonesia) which i bought this imac 27" from. got transfered 4 times and i had to explain it to them all over. in the end i got to speak to the technician and i asked whether i can get a replacement and they don't think it's the correct solution and leave me hanging here.
the apple store is listed as an apple authorized service provider (AASP) or apple authorized distributor (AAD):
iBox by Padang Digital Indonesia - Apple Authorised Service Provider
Puri Imperium Office Plaza, (Belakang Menara Imperium)
Jl. Kuningan Madya Kav. 5-6, Jakarta
12980
Tel: 62 21 8370-iBox (4269); 830 6763
Fax: 62 21 830 6730
Email: [email protected]
Web: http://www.ibox.co.id
i called the apple support on the apple.com (0018 03061 2009 for indonesia) today wednesday 19 may 2010, time 1:12pm indonesia local time (GMT +7) i didn't get the guy's name but i can tell he's Indian from the accent, i told him what the problem is, he told me to wait, i waited for 10 minutes and he hung up on me at 1:24pm. please check on the record, because i was told the whole conversation was recorded.
so, let's go to the problem:
i can't share my internet with airport built-in in my imac 27".
I'm using ZTE usb hsdpa modem connected to the imac. (fyi, my friend is using the same exact modem and internet provider and don't have any problems with internet sharing using his macbook)
i tried to share the internet through the airport express simply with these steps:
1. open the system preferences, internet sharing,
2. connection with "ZTE usb modem", and the box next to "Airport" is ticked
3. turn on the internet sharing
4. press start
5. yes the firewall is off.
and these are what i'm having right now:
1. the airport symbol wont turn into an arrow
2. when i open the network preferences, it says: AirPort is turned on but is not connected to a network. (color is orange not green)
3. i searched the wireless network with my ipod touch and i found nothing
4. if i try to "create a network" here's what it says "There was an error creating your computer-to-computer network."
5. this are the details on the airport card:
Software Versions:
Menu Extra: 6.2 (620.24)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2 (620.24)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.9.5
Locale: RoW
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Not Associated
and yes, i've updated all the airport software and i stick on the 10.6.2 os.
It seems like people who has this latest imac 27" also having problems with the airport express. and they somehow got a replacement.
http://discussions.apple.com/thread.jspa?threadID=2261196&tstart=0&messageID=109 80828
so, i really really appreciate if i can get help here.
many thanks and best regards,
irene

If you have anything configured in System Preferences/Network/Airport then you have conflicts configured into the network. I suggest that you start from the beginning. Do not assume anything. Do not take any short cuts. Start fresh.
Go to Sys Prefs/Sharing turn off Internet Sharing. Go to Sys Prefs/Network, highlight AirPort and press the - symbol below to remove the AirPort interface. Now press the + symbol and create a new AirPort Interface. In the new AirPort interface do not turn on AirPort. You should only select the box to show AirPort Status in the menu bar. Now press Apply.
Go to Sys Prefs/Sharing and follow the steps 1 through 11 in my first post.
In step 11 Sys Prefs should ask you to turn on AirPort. Turn it on. It should next ask you to start Internet Sharing. Start Internet Sharing.
The AirPort Status in the menu bar should show AirPort is on and have an arrow pointing up. In the AirPort Status dropdown menu it should show AirPort is ON, Internet Sharing is ON and it should show the name of the Internet Sharing network that you created.

Printing Problem with Pro-100 and Photoshop

This is my setup: using Mac Pro running Snow Leopard (10.6.8) & editing & printing from Photoshop CS 6. I have new Canon Pixma Pro-100 printer and set it up OK. First thing printed was a page from a document from MS Word on 8.5X11 plain paper - this came out OK. Next I fire up Photoshop and open a 4X6 inch image (just a snapshot in jpeg, landscape format) to do a test print. I set it up in the print dialog as 4X6 paper, Canon's Pro Glossy paper profile, rear tray, standard print quality, Photoshop manages the color. I load the paper in the rear tray close the covers and hit print.
Now, when it starts to print the printer moves about 3.8 inches of paper out of the printer and it starts printing on the remaining 2.2 inches then spits the paper out. It does this in Photoshop (any image, it doesn't matter), and it does it printing from Nikon’s Capture NX. I have been able to get it to print on the paper correctly using Apple's Preview program but that that's not going to do me any good. I was on the phone with Canon tech support for about 2 hours and they were completely puzzled suggesting I would have to use Canon's printing apps instead to print - that doesn't do me any good either. I want to be able to print from Photoshop. I have the most recent Canon driver, and Photoshop is up to date. Any one every heard of this or experienced the same problem? I don’t think I’ve overlooked anything. Thanks JMDavis!

Hi JMDavis,
Have you tried printing using the Print Studio Pro plugin for Photoshop? If this is not install, it is available for download from Canon's web site. To download and install Print Studio Pro, please follow these steps:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support/consumer
2. Type PIXMA PRO-100 in the "Enter Your Model Name" box and click GO.
3. On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
4. Click Software.
5. Click on Print Studio Pro.
6. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
7. Click on the Download button.
8. The file will be downloaded to your Downloads folder.
9. Once the download is complete, close all windows.
10. Double click [mpsp-mac-1_3_5-ea9_2.dmg] in your Downloads folder. Files will extract.
Follow the prompts and installation will complete.
Once installed, please open your image in Photoshop and print it using the Print Studio Pro plugin.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Problems with iMac G5 and LaCie external drives

I have an early iMac G5 (without iSight), running OS 10.5.2. I've had a 250GB LaCie external hard drive for about a year now, and it worked fine up until a couple weeks ago, when I got this message:
Disk Repair
The disk "External HD" was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible."
I was unable to save anything to the drive after this, including altering files already on the drive. Long story short, I bought another LaCie drive, because I needed more space anyway. I got the 500 GB model, moved everything onto it, erased the old drive, and then I had two working drives. I've since only been using the new drive, but just a few days later, I got the same message again, and am having the same problem, but this time for the new drive. I'm not a computer-savvy person, so I have no idea what could be causing this. This happened not long after updating to OS 10.5 from 10.4 - I'm not sure if this could be related. Can anyone help?

One thing to look out for is the power source. If you have a huge octopus of power cords plugged into one outlet, the drive may not be getting enough power to operate properly. That would explain why the same thing happened on two separate drives, both recently. You may have added something new to the +power strip+ that is overtaxing the available power draw.
Someone I know had this issue. It never occurred to him or me to consider this possibility. His external drive was regularly getting disk directory errors. I initially thought the drive was going bad, but once we distributed the power cords to two power strips connected to different outlets, the problem did not recur.
Your problem may be something else, but it sounded too familiar to not mention my experience with the power cord octopus monster.

How to fix shortcuts problems with foreign keyboards and photoshop in english

Some shortcuts won't work with a non english keyboard and you'll have to switch to english keyboard to fix this but it's not always practical
You can use a program from Microsoft available here to customize your keyboard
http://msdn.microsoft.com/fr-FR/goglobal/bb964665.aspx
It works well with Win 7 64 bits and it's easy to use !
And you can still use your normal keyboard with others application (windows can switch automatically keyboards)

There is too much nonsense talked about HDMI cables. For a start they shouldn't be sold as 1.2/1.3/1.4 etc compatible, the HDMI standard expressly forbids this. There are standard (cat 1 - < 75 MHz) and high speed cables (cat 2 - < 340 MHz) and both will work with the Apple TV.
Strictly speaking a cable should meet the HDMI standards before it can be sold and if it doesn't work you should ask for it to be replaced. Higher cost cables cost more because of quality, quality that is represented in quality control or tolerance, higher price cables will likely have a lower failure rate, but that doesn't mean cheap cables shouldn't work when you buy them.
Uniformity in diameter and in length are paramount. If one component is 1/3200 th of a mm longer than another the signal will become out of sync, variations in diameter can cause the signal to bounce back along the cable.
Personally, I'd never buy an expensive HDMI cable but I'd also avoid the ultra cheap ones, they should work out of the box, but throughout their life they will likely be pulled, bent, tripped over and run over with the vacuum cleaner, better cables are likely to have greater resistance to such treatment.

Problem with black screen and crashes after installing windows 7 and bootcamp

K, so I partitioned my internal HD using Bootcamp, installed a new copy of Windows 7 Home, put in my Mac OSX disk and installed the additional stuff. I can successfully log in to Windows and open the browsers I have installed: Comodo dragon and Mozilla FF. McAfee auto installed with FF and I have Comodo Antivirus installed.
However, within minutes of use, my screen goes black, the computer does not shut down and reboot, I have to press the power button and wait a few secs for it to shut down then reboot. This has happened from both browsers while in Windows on Facebook in a game; while trying to save an attachment from an email via webmail and also while checking the inbuilt Windows settings for the display.
The latter produced the following report (below) on reboot and when I hit the "look for a solution" button, the actual window vanished after a few secs.
2 additional bits of info which may or may not be related:
a) running windows troubleshooter I discovered I have prob with:
driver for Inter (r) 5 series /3400 series chipset Family USB Universal Host Contoller - 3B3B
- I Googled this and it seems a common prob. Tried the reinstall, didn't work, so disabled it as suggested on some of the forum posts.
b) The OSX side of my computer seems to run fine most of the time, tho I have had the odd back screen, then wait, press reboot to power on and off in past as related in this post last month: https://discussions.apple.com/thread/4844797 (maybe a kernal panic..???)
Would anyone know what is causing these probs or what I can do about them? My computer is no longer under warranty and the couple of times I had probs while it was, I was told the probs were to do with the power supply and given a new one, I'm not sure if they looked at the logic board. The OSX side has also had an ongoing prob to do with sudden shrinkage of the image content, which I mentioned to the geniuses at the Apple store b4, but as it wasn't acting up there they couldn't do anything about it... ( looks as tho sm1 changed the screen resolution and whatever is in the browser window shrinks, tho desktop, is never effected - if that makes sense!.)
All in all tho, does make me wonder if the prob is based in the graphics switching..???
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    2057 Additional information about the problem:
BCCode:    333
BCP1:    0000000000000001
BCP2:    0000000000000002
BCP3:    0000000000000003
BCP4:    0000000000000004
OS Version:    6_1_7601
Service Pack:    1_0
Product:    768_1 Files that help describe the problem:
C:\Windows\Minidump\032413-20872-01.dmp
C:\Users\KittyH\AppData\Local\Temp\WER-166952-0.sysdata.xml Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

When booting up hold down the option key and pick the Mac startup disk. To make it automatic, once in your Mac side go to preferences, startup disk and pick the Mac disk. Next time you boot up it will boot up to Mac OS.

Lightroom 2 and Photoshop CS3

I have a problem where changes or if I edit pictures in Lightroom 2.0, these changes are not reflected in the actual picture if I open them in Photoshop CS3.
Is this a known issue with Lightroom 2 and Photoshop CS3 or there is some sort of a workaround?

>in Lightroom 2.0
Upgrade to Lightroom 2.1 ASAP. Fixed many bugs and it's free.
Anyway. What kind of files? How do you open the file in Photoshop, through the "edit in Photoshop feature" or do you open it separately from Finder/explorer? Do you get a dialog that asks whether you want to edit with changes or the original?

Anyone else having a Problem with Leopard and Photoshop CS3?

I'm using CS3 with Leopard 10.5.4 at work and there are some very aggravating anomalies, that I'd like to nail down to a cause. Most frequently, when switching from apps to P'Shop, the menu bar stays for the previous app, i.e. when going from Finder to P'shop, the menu bar still says Finder and has Finder options. Changing from Lightwave to P'Shop, the menu bar remains Lightwave.
Occasionally, an Adobe app - P'Shop or InDesign - will simply disappear and not come back. The icon in the dock shows it as active, but no amount of clicking, Command-Tabbing will reveal the app and I have to Force Quit, losing unsaved changes.
I have a feeling it's Leopard, since, I've used CS3 on Tiger and CS4 on Tiger and never had a problem.
I'm wondering if upgrading to the latest Leopard would make much of a difference.
Has anyone come across this and found any kind of answers?
Thanks for any suggestions.
-Vincent

> Just because it doesn't happen to Phil (who may not use all of the same features of the Suite that others do anyway) does NOT mean that these problems are not real and are not mere PEBCAK.
Right. If someone is having a problem associated with Tiger, it's PEBAK. If Leopard is involved, it's automatically because of Leopard. Apparently, with Apple's latest OS, trouble shooting problems are no longer necessary - just blame it on Leopard and call it a day.
b FUD
I find the dynamics here really interesting. This thread would have been very different if Vincent had posted with problems involving Tiger. Would have gone something like this:
After admonishing him for not providing more information about his setup by posting the obnoxious big blue link on how to ask questions (ahem - we know NOTHING about his machine or configuration, such as which machine, how much RAM, scratch disk or attached peripherals), there'd be all kinds of trouble shooting advice given - "try a new user", "repair permissions", "run DiskWarrior, and on and on ...
But no, since he mentions Leopard, none of that is apparently necessary and the completely, utterly
b irresponsible
advice is given ... "that's just the way Leopard is".
Those are some serious problems he's reporting that have nothing to do with Leopard. Something is obviously hosed!
As for discounting my experience because I don't use every app in the suite as extensively as I do Photoshop, I'm FAR more qualified to discuss Leopard and CS issues than Ann or Neil who do not use Leopard at all (and have never used it as far as I know.)
"Others have problems with it", is their battle cry but it's extremely weak. Do I really need to remind you all that these forum are ALWAYS filled with people who have problems, regardless of version or OS? You act as if this forum was a ghost town when Tiger and CS3 were current!
Gee, Ann ... people are STILL reporting problems with 10.5 and CS3? How shocking! Guess what - people are STILL reporting problems with 10.4 and CS3 too! Let me make a prediction - people will have problems with 10.8 and CS9!
Vincent-
> I don't really deal with fonts anyway ...
Yes. You do. Even if you never type a single line of text, every application uses fonts to create menus and other GUI items. If one of those fonts are bad, it can create all kinds of problems, including the very problems you mention.
The fact that you don't seem aware of this and you're still using 10.5.4 leads me to believe you're not familiar with the basic practices of maintaining a healthy system. Again, how did you install Leopard on that machine?
Look, if you're simply trying to justify using CS4, go right ahead. It's a worthwhile upgrade in it's own right. However, if you install it on that machine in it's current state, CS4 will NOT fix your problems because you do NOT have a healthy system.
You asked for experiences with Leopard - I can launch every application in both CS3 and CS4 suites
i simultaneously,
and STILL not have your issues. I haven't experienced anything like your CS3 problems in Leopard - on both a 2006 Mac Pro and a 2008 Macbook.
If you'd like help to try and figure out the real problem, I'm more than happy to help. If not, Adobe will gladly take your money ...
-phil

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.

Ned, thanks for responding. Internet access is not the problem, I will have a tower computer connected to Comcast.
Isolating the laptop from the internet is the issue.
From: Ned Murphy <[email protected]>
To: Mordecai benHerschel <[email protected]>
Sent: Wednesday, March 18, 2015 7:27 PM
Subject: I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
I have installed both Audition 3 and Photoshop CS3 on a laptop with no Internet connection. How may they be activated? The methods documented in the software don't work.
created by Ned Murphy in Downloading, Installing, Setting Up - View the full discussionSince it is a portable machine, couldn't you go somewhere that has wifi available and use that as a temporary internet connection? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7314414#7314414 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7314414#7314414 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I'm trying to insall Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I

I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks

If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problems with iMac retina 5K (artifacts, glitches and etc.)

Hello dear Apple.
I have bought new iMac with retina 5K display and I have found lot of problem with it. It was December 2014 when I got my first iMac. And after then I have found few real problems with it.
The first problem is I can't open high resolution image with standard Preview.app. I mean 'high resolution' - more then 30-40 megapixels. When I open them, I can see image, but only 2-3 seconds, and after that I see horizontal artifacts only. I can't open images, like this Rembrandt.jpg; Carpaccio.jpg; Holbein.jpg
The second problem, when I change resolution in to scaled mode (System Preferences/Display) for increase image on display. I found when select some area on background of desktop it has left some lines after itself. It is particularly unpleasant if you have plain colour desktop background. You can view, how does it look here.
The next problem with animation in different parts of interface, e.g. sometimes when I open Time Machine some parts of windows are freezing or appear some artifacts or glitches near borders of window. And I have the same situation, when I open Mission Control, or any Adobe app or other, or simply rename a files. I have found few discussions with problems like mine, but in the separate places
5K iMac - bad GPUs?
Graphic Problems with Retina iMac
iMac 5K and indesign glitch
And after that I want to tell you that I have this problems on four (4) iMacs. It was really difficult to arrange four replace. I have lost a lot of time an spent a lot of nerves for discuss and resolve my problems with Apple support. Finally, they told me that they do not know about problems with iMacs, and they could offer give my money back. I glad to get my funds, but now in my country price for iMacs has doubled. And if they refund my money, I can buy half new iMac only.
I am sorry for my language and style, but I do not know what I should doing with that. And should I hope, that my problem resolve with OS X updates? Or it is hardware problem of the whole iMacs 5K...

Yes Ralph, absolutely correct, 4 times. Do you have the graphic card the same as me, or m290? Could I ask you check your iMac for few things, please?
For the first, can you enlarge scale in System preference/Display and install plain dark color desktop background. Are there any footprints after rectangular selection like in my video https://youtu.be/dBglFvjJx1Q?
And for the second, could you download this image https://upload.wikimedia.org/wikipedia/commons/0/07/Rembrandt_Harmensz._van_Rijn _-_Nachtwacht_-_Google_Art_Project.jpg and open in plain Preview.app, and zoom it? Are there any glitches?
Thank forward.

Problem with Wacom Tablet in Photoshop

Hello.
I'm currently using Adobe Photoshop CS3 on Windows XP with an Wacom Intuos 3 tablet.
The problem I'm having is that when I use the tablet pen to click anywhere in
Photoshop, the cursor essentially locks in place and does not move. On the canvas, this means I can only place dots. This happens whether I'm clicking on tools, scrollbars, etc...
I used to be able to use it fine in CS2, but then it stopped working on day, and I thought that maybe upgrading would solve the issue. However, this has just left me with the same issue.
The pen does work normally in all other programs, such as in MS Paint or when clicking and dragging to select icons on the desktop. Also, clicking and dragging with a mouse works normally.
Any help would be appreciated! Thanks so much in advance.

Thanks Hunt, I'll give that a shot and see.
I'm not quite sure what you mean, Martha. It used to function in Photoshop perfectly fine, but no longer works.
I have added Photoshop to the Wacom prefences manager that changes pen pressure and things, but I have a feeling you're referring to something else.

Lightroom 3 and Photoshop CS3 do not recognise Canon PowerShot S90 raw files

My husband has lightroom 3 and Photoshop CS3 but they don't recognise CanonPowershot S90 camera raw files. I've tried searching for the problem on internet but can't find anything that helps. Adobe's DNG converter doesn't work either. I've tried different versions of the DNG converter to no avail. Buying a new Adobe product is out of the question.
Another problem is that his e-mail address has been changed so that he can't login to his Adobe account. We used to be able to contact Adobe Netherlands by phone or email but that option isn't available anymore.
Can anyone help please?

Go to here:
Adobe - Lightroom : For Windows : Adobe Photoshop Lightroom 3.6
or here:
Adobe - Lightroom : For Macintosh : Adobe Photoshop Lightroom 3.6
for the final versions of LR3. Download and install the software. You do not need to remove your present installation first, LR will install over it and fix any faults that now exist.
Your husband can log onto his Adobe account with the old email address and when in the account can edit the address to the new one.

Problems with Imac 27" and Photoshop CS3 on Windows 7

Similar Messages

Maybe you are looking for