Problems with IMAC after using ccleaner app

I downloaded the free cccleaner app and used it to "clean" my imac. Now I can't access .doc or .xls files on my mac (.docx and .xlsx files are fine) and the auto-save in WORD doesn't work. I can't even open .doc WORD files that I receive in an email. And these are only the problems that I found right away. Anyone have any ideas on what I can do?

Those 100 reviews may have all been written by the developer. There is a reason it is free... perhaps they have a paid utility that fixes all the problems it causes.
There is no registry on a Mac. It doesn't exist. A Mac is as different from a Windows computer as a bicycle is different than a fish. CCCleaner is a Windows program designed to address the myriad Windows problems that simply do not exist on a Mac. Programs like that prey upon people's ignorance and prejudice resulting from years of Windows indoctrination. Don't be one of them.
Enough scolding... Can you launch MS Office, and open the files from there?
It may be a simple matter of reassociating the files with their creator. Try this: select (single click) one of the files that will not open and choose "Get Info" from the Finder's File menu. In the information column that is displayed, click on the small triangle near the words "open with". Select Word (or whatever is appropriate) and then click the "Change All" button. See if that fixes things.

Similar Messages

Charging problem with Z1 after using magnetic charging post charger

Greetings, I have an xPeria Z1 running Android 4.3, build 14.2.A.0.290.All has been working just fine until a few days ago when I connected my charger using the magnetic charging posts on the side of the phone, rather than plugging in the usb cable. Note: I've charged via this method for over a year with no issues. This time, however, the phone shut off when I connected the charging cable. I could not boot it up again, using any options. The "hard power down" reset button did nothing - the power button with Vol UP or Vol DOWN did nothing. Using a charging cable plugged into my PC did nothing. Using a car charger did nothing. When I got home, using the factory supplied charger and cable I was finally able to wake up the phone using the Power+Vol UP (I think) option. After finally waking the phone up again I thought all was well. However, when charging the phone, when it gets to the point that the battery is fully charged (or close to it), the screen comes on, all by itself. It stays lit for a minute or so, then turns off for a few seconds, and then comes back on again. This repeats constantly. I tried powering the phone off and unplugging the charger. After doing that, the screen still turns itself on, showing just the SONY logo. That stays on for a few seconds, then goes off, and then that process repeats. SONY...off.... SONY.... off... SONY... off.... when the phone is OFF. The only way to stop this is to use the little reset button on the phone. I don't know if the charging cable somehow messed up the battery or other hardware, or if it messed up something in the software. I suspect I'll have to re-flash the ROM, but I'm hoping to avoid this. Any suggestions? Thanks, Bill

actually, my old black z1 have exactly same problem with you...i don't know if this happend to you to...but in my problem, i put the magnetic charger in the wrong way...then the problem came out exactly same like you...maybe someone put the magnetic charger in your z1 wrong way...i try to repair using PC Compinion but not helping...factory reset, nothing happend...finally i took my phone to repair and they give me the new one...but this time my z1 is white

Problem with Superdrive after using Bootcamp

Alright so earlier today I decided to Bootcamp my Macbook and install Windows 7 with a 70GB partition. I was using https://help.apple.com/bootcamp/mac/5.0/help/#/bcmp173b3bf2 and http://www.howtogeek.com/186907/how-to-install-windows-on-a-mac-with-boot-camp/ to help guide me through the process. Everything was running smoothly at first...I had a 32GB memory stick that I used to load the support software onto and I had a Windows 7 Ultimate 64-bit DVD in my disk drive.
The first problem I ran into was when Bootcamp wanted to download the files onto the memory stick - it wanted me to format the stick. So I went into Disk Utility, clicked on it, went to erase, then formatted it to the same format it was (because it was already FAT) and then it all worked. After getting the support software onto the memory stick the next step was to partition my disk. After doing a TON of research I finally decided that 70GB would be enough for the OS, a game or two, Sony Vegas Pro, and a few small programs. So I dragged the thing to give the new partition 70 GB and pressed install.
Then, the next problem occurred - a message popped up saying "The USB drive connected to this Mac contains a bootable volume. In order to install Windows 7 from the DVD, the Boot Camp Assistant needs to disable this functionality. No information on the drive will be removed, do you want to continue?" I was hesitant at this point to do anything so I googled it and couldn't find much except this thread - Bootable volume on USB flash drive in boot camp. I decided to try it and press continue since according to the thread it would stop me if there was a problem. Once I did I THINK (I can't remember that it did for sure or not) it dismounted the memory stick, which I remember thinking was okay because I could just unplug it and plug it back in after Windows 7 was installed to install the support software (Also, I NEVER removed the memory stick until after a reboot later on). After that Bootcamp began partitioning my hard drive.
About an hour later the blue progress bar had actually filled up to at least 99% (but it looked like 100% to me) but Bootcamp still said "Status: Partitioning Disk" so I left it alone for another 1-2 hours. After that I started getting worried and googled how long this process was supposed to take and found out that this step normally only took a few minutes for most people. At this point I started looking up fixes for this but nothing matched my problem since Bootcamp itself wasn't actually frozen (when I clicked and held on the icon it didn't say "Application not responding") so I decided to check to see if the partition had worked. Then, Disk Utility froze like a few seconds after opening it up so I had to force quit that. My next option was to check under "Storage" in "About this mac" so I tried that and it froze as well. While all this was going on I kept checking back to Bootcamp and it never froze.
Now I was getting extremely worried and with no solutions on Google and no idea what to do I decided to just try and restart my computer and pray to god that it would reboot fine. Luckily, it did...for the most part. After rebooting all my applications seemed to be working fine (I can confirm that Terminal, Disk Utility, System Preferences, System Information, and Safari are all working or at least loading). I also had all my files still on my computer so that was good. Next, I checked Disk Utility to see if the partition had actually worked and it did, or at least it is showing up as "BOOTCAMP" under my main hard drive. Then, I tried using Bootcamp again and this is when I noticed something new - a warning on Bootcamp's first page that wasn't there before, "You need an optical drive to install Windows. Connect an optical drive to your computer. You cannot install Windows with a remote optical drive." I can't guarantee that it wasn't there the first time but I really don't remember it there (I'm sorry I don't have faith in my memory anymore :/). After reading that I checked my Desktop for the mounted Windows 7 Ultimate 64-bit DVD and it wasn't there. Then, I checked Disk Utility and it wasn't showing up there either. The only things I can see on Disk Utility are my main hard drive with both partitions, my memory stick, and a random dmg file called decryptedFile.dmg (the size of this file is only 15.6mb so I don't think it could be the OS DVD).
So now I am trying to figure out how to get my computer to recognize that it does have an internal optical drive and that there is a DVD inside of it. I looked around on Google to try to find answers but all the regular options to fix this don't work since the computer itself is not realizing it's there. I don't know if this helps to prove that it doesn't realize this but I checked in System Information -> Hardware -> Disk Burning and it says "No disk burning device was found. If the device is external, make sure it's connected and turned on." And since a "Superdrive" can read disks I'm assuming it can burn them to and would be shown under that. (I don't know that much about computers though so I could easily be wrong)
Anyways, sorry for the extreme detail that I went into but I wanted to get as much information about what happened as I possibly could. For those of you who don't have time to read all that I'll put a little summary.
Basically, I tried to Bootcamp my Macbook to run Windows 7 Ultimate 64-bit. I ran into a few problems and then Bootcamp wouldn't move on from "Status: Partitioning Disk" so I had to restart my computer. After the restart my Macbook doesn't recognize that it has an internal Superdrive and therefore doesn't realize that there's a Windows 7 Ultimate DVD disk in it. I looked around for answers but none of the simple ones (using key commands on the keyboard and typing something into terminal) worked. Now I'm looking for help to get my computer to realize that it does have a Superdrive inside so I can get the disk out.
Thanks in advanced! If any more information is required to help please let me know so I can find it. Also, this is a Mid-2010 White Unibody Macbook.

Hi and welcome to Discussions,
I assume you have used the OSX Leopard DVD that came with your MBP to install the BootCamp Drivers, right ?
Do you have any hardware devices that are shown with 'yellow signs' when using the Device Manager from Vista ?
Try using this DX Update http://www.microsoft.com/downloads/details.aspx?FamilyId=C1367BC3-4676-481A-BFAA -5C15D1D7199D&displaylang=en
Hope it helps.
Stefan

Serious wifi problems with iMac after installing Mountain Lion

After installing Mountain Lion, I'm experiencing serious trouble with wifi. I noticed that some people had this before with Lion. Can anybody help to solve this problem or should I downgrade to Mountain Lion?
Please help
Thanks in advance!

Thank you for the information Arizonadonn! I'll install 10.8.1 this evening. I really hope you're right after having connection troubles for almost a month now .
If this solves my problem, you'll be my hero !

Problems with login after using assistant to transfer files

Hi guys,
Today I got my new Macbook pro with intel 7 and Mac OS X 10.7. I started to transfer all info from the old computer, including user accounts, files, documents etc.
The old computer is a Macbook pro OS X v 10.6.8.
Everything was fine with the transfer until i tried to login on the new computer with same accoutsettings as the old. My new computer is telling me: Could not login to the filevaultaccount during a problem.
Do anybody know why i get this problem?
Cheers,

anjus wrote:
Everything was fine with the transfer until i tried to login on the new computer with same account settings as the old. My new computer is telling me: Could not login to the filevault account during a problem.
I took that to imply a separate account. Since that's not the case, all I can suggest is to disable filevault on the old machine, wipe the new, restore Lion, and start over. I don't use FV, but suspect that might be what's causing your issues.

Problem with WMI after using MDT/WDS to deploy

Hi
I am using MDT with WDS to deploy windows server.
All is fine, besides WMI from Zenoss for monitoring, it show's me errors like
" Could not read the Windows event log (NT_STATUS_ACCESS_DENIED). Check your username/password settings and verify network
connectivity."
If i do the same installation by hand, everything works.
Do you have any idea how installation from MDT differs from by hand installation, that could have impact on WMI?

Hi Bartosz Kupiecki,
May you must have some misunderstand of WDS and MDT deploy, your issue may occur because your MDT has some unattended file or customize the install image (has setting
some special configuration which different with the your manually installed system), please remove this customize configuration then try again.
More information:
MDT 2013 – Part I: MDT Configuration; Capture a Windows Server 2012 R2 Base OS Image
http://blogs.technet.com/b/askpfeplat/archive/2014/08/04/mdt-2013-part-i-mdt-configuration-capture-a-windows-server-2012-r2-base-os-image.aspx
There have a specific forum to support the MDT question, more detail about the MDT question please post to the MDT support forum.
MDT support
forum:
https://social.technet.microsoft.com/Forums/en-US/home?forum=mdt
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I have a problem with iTunes after using Migration Assistant

Hi,
I've just used Migration Assistant to move all my files from my PC (HP Pavilion) to my new MacBook Air. In Itunes now, my songs are showing but all of them have an exclamation mark by them as none of the files can be found. How do I resolve this (hopefully without taking too much time)?
Thanks

Hi, I just tried that but I still have the same problem. Is there anything else I could do? Thanks

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there

CS 4 Dynamic Link to Encore doesn't work most of the time. Encore stops operating after opening and periodically Premier Pro stops working. I'm told that there has been a problem with CS4 when using Dynamic Link to go to Encore and build CD's. Is there a way around this? Is there a patch to correct it?

To build CD's???
What problem does Encore have with DL?
If DL is not working properly for you the way around this is to export from Premiere to either mpeg2-dvd for DVD or BluRay H.264 for BD-disks and import the files in Encore.

After downloading iOS7, I'm having problems with typewriting Korean in the apps such as the Pages and Keynote.

After downloading iOS7, I'm having problems with typewriting Korean in the apps such as the Pages and Keynote.
When I type "한글", it should appear as such but it appears as "하 ㄴ 그 ㄹ"

Report this to apple via
http://www.apple.com/feedback

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
After five days of testing in the service they can not found fault and it was decided to change the graphics card.
New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

You could look at the System Profile for the info it presents for the card. But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
What program are you trying to run? Is there anything in the system log?
I think it's the program that's having the problem and not anything with your video software.

Problem with Java after Software Update to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

Problems with iMac retina 5K (artifacts, glitches and etc.)

Hello dear Apple.
I have bought new iMac with retina 5K display and I have found lot of problem with it. It was December 2014 when I got my first iMac. And after then I have found few real problems with it.
The first problem is I can't open high resolution image with standard Preview.app. I mean 'high resolution' - more then 30-40 megapixels. When I open them, I can see image, but only 2-3 seconds, and after that I see horizontal artifacts only. I can't open images, like this Rembrandt.jpg; Carpaccio.jpg; Holbein.jpg
The second problem, when I change resolution in to scaled mode (System Preferences/Display) for increase image on display. I found when select some area on background of desktop it has left some lines after itself. It is particularly unpleasant if you have plain colour desktop background. You can view, how does it look here.
The next problem with animation in different parts of interface, e.g. sometimes when I open Time Machine some parts of windows are freezing or appear some artifacts or glitches near borders of window. And I have the same situation, when I open Mission Control, or any Adobe app or other, or simply rename a files. I have found few discussions with problems like mine, but in the separate places
5K iMac - bad GPUs?
Graphic Problems with Retina iMac
iMac 5K and indesign glitch
And after that I want to tell you that I have this problems on four (4) iMacs. It was really difficult to arrange four replace. I have lost a lot of time an spent a lot of nerves for discuss and resolve my problems with Apple support. Finally, they told me that they do not know about problems with iMacs, and they could offer give my money back. I glad to get my funds, but now in my country price for iMacs has doubled. And if they refund my money, I can buy half new iMac only.
I am sorry for my language and style, but I do not know what I should doing with that. And should I hope, that my problem resolve with OS X updates? Or it is hardware problem of the whole iMacs 5K...

Yes Ralph, absolutely correct, 4 times. Do you have the graphic card the same as me, or m290? Could I ask you check your iMac for few things, please?
For the first, can you enlarge scale in System preference/Display and install plain dark color desktop background. Are there any footprints after rectangular selection like in my video https://youtu.be/dBglFvjJx1Q?
And for the second, could you download this image https://upload.wikimedia.org/wikipedia/commons/0/07/Rembrandt_Harmensz._van_Rijn _-_Nachtwacht_-_Google_Art_Project.jpg and open in plain Preview.app, and zoom it? Are there any glitches?
Thank forward.

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

Airport problem with iMAC 27" and serious service support for indonesia

Hi all,
i can't seem to get any help from anywhere else. so i try to post it here.
i tried to call the apple store (indonesia) which i bought this imac 27" from. got transfered 4 times and i had to explain it to them all over. in the end i got to speak to the technician and i asked whether i can get a replacement and they don't think it's the correct solution and leave me hanging here.
the apple store is listed as an apple authorized service provider (AASP) or apple authorized distributor (AAD):
iBox by Padang Digital Indonesia - Apple Authorised Service Provider
Puri Imperium Office Plaza, (Belakang Menara Imperium)
Jl. Kuningan Madya Kav. 5-6, Jakarta
12980
Tel: 62 21 8370-iBox (4269); 830 6763
Fax: 62 21 830 6730
Email: [email protected]
Web: http://www.ibox.co.id
i called the apple support on the apple.com (0018 03061 2009 for indonesia) today wednesday 19 may 2010, time 1:12pm indonesia local time (GMT +7) i didn't get the guy's name but i can tell he's Indian from the accent, i told him what the problem is, he told me to wait, i waited for 10 minutes and he hung up on me at 1:24pm. please check on the record, because i was told the whole conversation was recorded.
so, let's go to the problem:
i can't share my internet with airport built-in in my imac 27".
I'm using ZTE usb hsdpa modem connected to the imac. (fyi, my friend is using the same exact modem and internet provider and don't have any problems with internet sharing using his macbook)
i tried to share the internet through the airport express simply with these steps:
1. open the system preferences, internet sharing,
2. connection with "ZTE usb modem", and the box next to "Airport" is ticked
3. turn on the internet sharing
4. press start
5. yes the firewall is off.
and these are what i'm having right now:
1. the airport symbol wont turn into an arrow
2. when i open the network preferences, it says: AirPort is turned on but is not connected to a network. (color is orange not green)
3. i searched the wireless network with my ipod touch and i found nothing
4. if i try to "create a network" here's what it says "There was an error creating your computer-to-computer network."
5. this are the details on the airport card:
Software Versions:
Menu Extra: 6.2 (620.24)
configd plug-in: 6.2 (620.15.1)
System Profiler: 6.0 (600.9)
Network Preference: 6.2 (620.24)
AirPort Utility: 5.5.1 (551.19)
IO80211 Family: 3.1 (310.6)
Interfaces:
en1:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.9.5
Locale: RoW
Country Code:
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless: Supported
Status: Not Associated
and yes, i've updated all the airport software and i stick on the 10.6.2 os.
It seems like people who has this latest imac 27" also having problems with the airport express. and they somehow got a replacement.
http://discussions.apple.com/thread.jspa?threadID=2261196&tstart=0&messageID=109 80828
so, i really really appreciate if i can get help here.
many thanks and best regards,
irene

If you have anything configured in System Preferences/Network/Airport then you have conflicts configured into the network. I suggest that you start from the beginning. Do not assume anything. Do not take any short cuts. Start fresh.
Go to Sys Prefs/Sharing turn off Internet Sharing. Go to Sys Prefs/Network, highlight AirPort and press the - symbol below to remove the AirPort interface. Now press the + symbol and create a new AirPort Interface. In the new AirPort interface do not turn on AirPort. You should only select the box to show AirPort Status in the menu bar. Now press Apply.
Go to Sys Prefs/Sharing and follow the steps 1 through 11 in my first post.
In step 11 Sys Prefs should ask you to turn on AirPort. Turn it on. It should next ask you to start Internet Sharing. Start Internet Sharing.
The AirPort Status in the menu bar should show AirPort is on and have an arrow pointing up. In the AirPort Status dropdown menu it should show AirPort is ON, Internet Sharing is ON and it should show the name of the Internet Sharing network that you created.

Problems with IMAC after using ccleaner app

Similar Messages

Maybe you are looking for