Problems with installer/executable files

I created an installer with an executable file so I can run my program on another computer that does not have labview. I went ahead and installed all the drivers on the target computer and I installed 8.2.1 Runtime Engine as well as NI-VISA Runtime engine. My program tests circuit boards which are connected to the the various modules and the target computer will be used on the manufacturing floor allowing employees to test circuit boards but not being able to mess up my program which is why I figured the stand alone is the way to go. The main problem I am coming across right now is that when the DAQ modules arent even connected to the usb port of the computer the executable is still running and saying the test passed which is very bad in the case on the manufacturing floor because boards could be sent out that have failures. I dont understand why when the DAQ isnt hooked to the computer the exe still runs when I feel like it shouldnt. Is there some function I can put in my program to make sure there is a signal being sent to the computer whether it is connected or not?? The actual program wont run if its not connected because it does not detect the modules which is good. What also confuses me is that when the DAQ modules are connected to the developer computer and the executable runs the circuit board test fails, BUT if the DAQ modules are connected to the target computer and the executable runs the circuit board test passes like before when the modules arent even connected...it makes me think there is something else I need to install on the target computer...

What you have set up only detects unit under test errors. There could be logic/programming errors or external hardware errors. The subVIs are not working if there is no hardware. They are returning an error and the Boolean state of the read should be ignored. The subVIs will always return something, even if it's a default value.
Shown below is some of simple optiopns you have for error handling. Look through the shipping examples. You will see a lot in them as well.
Message Edited by Dennis Knutson on 04-08-2009 12:38 PM
Attachments:
Error Handling Options.PNG ‏6 KB

Similar Messages

Problem with installation and activation

Hi, I have a problem with the installation of Adobe Muse.
I had a free 30-days trial, when it was over I bought the product ($ 13 per month),
I installed the program again and I see the same window with the finished Trials
and it requires a serial number and does not allow to enter the program.
I installed the program on your PC wife without any problems, but I can not install it on a laptop.
I have a laptop with Windows 8 operating system.
What I've done:
1. Uninstalled the free program,
2. check the connection to the Internet,
3. has installed a new program from the official website adobe.com,
4. Remove the line for the activation of the hosts file and resave the file,
5. turned off the brandmower,
6. rebooted.
I can't get support for a 3 days, is it the most terrible support I've ever seen? I dunno
Please help me at [email protected]

I guess this stuff helps me
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
2014-08-07 20:07 GMT+07:00 Дмитрий Броский <[email protected]>:
thanx
>
2014-08-07 18:18 GMT+07:00 Prabhakar.Kumar <[email protected]>:
problem with installation and activation created by Prabhakar.Kumar
>> <https://forums.adobe.com/people/Prabhakar.Kumar> in *Help with using
>> Adobe Muse CC* - View the full discussion
>> <https://forums.adobe.com/message/6619532#6619532>
>>

Hey, I had met a problem with installation. Can any one help me?

Hi everyone, I'm an user of Windows 7(64 bit),
I had just download "Master Collection CS5.5"
Everything are fine but Adobe Acrobat Professional can't install on my computer.
There are the details..:
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 1 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed
Thanks

Re: Hey, I had met a problem with installation. Can any one help me?
This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc. packaged with your Adobe software.
SOLUTION (not easy, but it works):
I first tried this; it did not solve my problem (but, if applicable, may help others). http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline http://kb2.adobe.com/cps/400/kb400769.html
Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!

Dreamweaver CS3. problem with installation

Greetings...
I have some strange problems with installation of Dreamweaver
CS3: when I'm running setup -- it shows "initialization" window and
then shows message that at one time I can install only one adobe
produc. But there is no unfinished installations...
Also this setup adds it's button to "Add or remove
programs"...
What should I do?
Best regards...

>I run the ADBEDRWVCSE_WWE.EXE 292.289 KB
Where did you get this file?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"ABK54" <[email protected]> wrote in message
news:fojl9t$e10$[email protected]..
>I run the ADBEDRWVCSE_WWE.EXE 292.289 KB (for trial
version of Dreamweaver
>CS3)
> and after I have try to run the Setup.exe file.
> After 2 sec open a window - preparetion of Adobe
Dreamweaver CS3 -
> ,transer
> some files and open a window Loading setup... in 2 sec
close this window
> and
> after nothing!!!
>
> I need your help please
> tks
>
>
> sorry for the shuting
>

Problems with installation / de-installation of WAS AS 6.20

Problems with installation / de-installation of WAS AS 6.20
Hello,
is anyone able to help me ?
The installation (started from setup on cd-1 kernel) of sapdb ends by 30 % with following massage:
start massage:
Warning: adaextractlctool_nt_ada InternallnstallationDo
SAPCAR returns with error 29.
Error: adaextractlctool_nt_ada InternallnstallationDo
Phase failed.
Error: Main {}
Installation aborted.
end massage.
massage above percent-banner on the left down-side:
no R3SETUP connected.
In the dos-window in background have been a lot of status-lines during extraction of sabdb-files. Also there have been a successful-massage:
"installation of sap db server finished successfully...." l.
The massage above was shown direct after the massage: "Extracting SAP DB Tools Software"
The Loop-back adapter is already installed (was the first ein did) and the files in win-folder 'hosts' and 'service' are correct (IP and so on)
my system:
Acer Aspire 5100
Ram 1 GB
HD 160 GB (140 GB frei)
Win XP prof.
How can I solve the installationproblem ?
I think, I have to clean my system before starting a new installation-try, because there are already entries in my win-start-button:
a) SAP DB Manager (but behind only a html-Link / no entry DeInstall)
b) a second entry SAP Front End (also behind just a html-link / no deinstall-button)
Under system/controll panel -> software are no entries. So, I`m not able to deinstall the sapdb by win-controll-panel.
And what is with registry-entries ? How can I delete the right entries in the registry. I dont know how to find them.
Another way I tried: on the SAP-CD 1 (kernel) with the file resume_setup.bat I get the same abort during installation I described at the top.
Please, I need help, because I need the system as 6.20 for a trainning.
Much thanks,
Regards, Lars Stolpe
MfG Stolpe

obsolete question ...

Problem with cl_gui_frontend_services execute method

Halo experts ,
I am facing a peculiar problem with cl_gui_frontend_services execute .
I am trying to open documents using the method execute of cl_gui_frontend_services
. But the problem is it is not opening file with space in its name .
ie it is able to open 'for_example.pdf' but not 'for example.pdf'
Any one has idea why it is happening?
Regards
Arshad

HI Arshad...
This does not seems to be a problem of GUI...
bad parameter exceptions is coming ... mean you are passing an incorrect parameter ...mean incorrect file name ...or the filename you are passing does not exits in you my documents folder ...
I have executed the same code ... and it is perfectly working fine ... you have to pass the file name exactly ... that means if
you are passing L11527110.pdf then the file name should be L11527110.pdf...
if you are passing the parameter as L 11527110.pdf (* with space ) then the file name has to be exactly same ... other wise ...
the application ACRORD32.EXE opens but gives as error ...
please check the file name in my docs and passing parameter value ....
I am giving my code which i did .....
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application ='ACRORD32.EXE'
parameter = 'B CDWBDIC.pdf'
default_directory = 'C:\Documents and Settings\Ritamadmin\My Documents\'
maximized = 'X'
operation = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
synchronous_failed = 8
not_supported_by_gui = 9
OTHERS = 10.

Problem with installation on PIV

I have a problem with installation Oracle 9.0.1 database on my
RedHat 7.1 and 7.2 dist.
My machine is PIV 1.4/768MB/40Gb
On PIII 933/786/40 everethin works fine.
Where is solution for my problem ??

Hello,
PIV isn't problem on Linux. (I am tried)
What is your problem ?
regards
peco

Problem with installation - Augigy

I have a problem with installation on 32bit Vista. Im downloaded newest drivers (SB24_VTDRV_LB__04_0077) and when the installation start, i receive message "A higher version of driver is found in your system, installation will abort.".
Help?

same problem here, is there a possibility zu force installation?

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

Problem with installation of Adobe Air 2.6

Hi,
I've got a problem with installation of Adobe Air 2.6 under Mageia 2 Linux. The installation stops with an error. Here's the install.log:
[Adobe AIR Application Installer:8550][ERR] Application Installer end with exit code 7
[setup:11894][INFO] Runtime Installer begin with version 2.6.0.19170 on Linux x86
[setup:11894][INFO] Commandline is:
[setup:11894][INFO] No installed runtime detected
[setup:11894][INFO] Relaunching with elevation
[setup:11894][INFO] Launching subprocess with commandline /tmp/air.HmUPbw/setup -ei
[setup:11894][ERR] Exiting due to error: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="/tmp/air.HmUPbw/build/opt/Adobe AIR/Versions/1.0/Resources/rpmbuilder error : symbol not found: parseSpec, /usr/lib/librpmbuild.so: undefined symbol: parseSpec error : + umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ '[' 1 -eq 1 ']';+ exit 0;+ umask 022;+ cd /tmp/air.HmUPbw/build;+ '[' /tmp/air.HmUPbw/build '!=' / ']';+ rm -rf /tmp/air.HmUPbw/build;++ dirname /tmp/air.HmUPbw/build;+ mkdir -p /tmp/air.HmUPbw;+ mkdir /tmp/air.HmUPbw/build;+ '[' 1 -eq 1 ']';+ true;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe;błąd: Nie odnaleziono pliku: /tmp/air.
HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater;błąd: Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/var/opt/Adobe AIR/Shared/Adobe/AIR/Updater; Nie odnaleziono pliku: /tmp/air.HmUPbw/build/etc/opt/Adobe/certificates/AIR/crypt/config.xml" errorID=1]
[setup:11894][ERR] Runtime Installer end with exit code 7
How can I solve this problem? Thanks in advance for help.

I'm not certain that Mageia 2 Linux is supported. This Release Notes page and this Install Help page don't mention Mageia, just
Fedora Core 12, Ubuntu 9.10, OpenSUSE 11.2.
Roy

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

Problems with installer/executable files

Similar Messages

Maybe you are looking for