Problems with *.mpkg and *.pkg

Hi everyone,
I'm really new to Mac, and I've been having a problem which is probably easy to fix:
I've got a program in an *mpkg format, and when I double-click it says that no program has been chosen for opening it. I looked it up and I need Apple Installer to open it, but I have no idea where to find it. I have the same problem with *.pkg files. Any suggestions? Thanks
iMac4,1   Mac OS X (10.4.6)  

Look in the /Applications/Utilities/ folder for a copy of the Installer application; if you don't find it, use Pacifist to extract the Installer from your Tiger installation disks. If you have a previous version of Mac OS X 10.4 on those disks, run the Mac OS X 10.46 combo updater afterwards.
(12180)

Similar Messages

  • Problems with Lion and .pkg files.

    After the upgrade to Lion, i've a problem to install .pkg files. If i try to open it with double click, terminal window starts and cursor waits for commands! With Leopard the installer program started after double click on .pkg files, but with Lion "installer" seems to be disappeared.
    Same happens with some apps, when clicking they don't install, but terminal window starts...
    How to fix this problem?

    Apologies for the misspellings.
    Basically i have tried uploading my MP3 files (one by one) in my device. then i tried uploading films. then when i disconnected my device all my songs on the device is gone. i do not know what happened exactly.
    it would seem the current iTunes version is "unstable". having uploaded 50 songs, doing them one by one only to find out out it got wiped out in the device for some reason.
    any explanation for this?
    Thank you.

  • Where can I download .mpkg and .pkg's so I can open them

    I'm having trouble. Something weird happened with my mac just couple minutes ago. Now I can't even open my .mpkg's and pkg's. Can someone please tell me what is seriously going on here?

    Hi Jin Yi,
    I have no idea what you mean with .mpkg and .pkgs. These are packages meant to install software. Why do you want to open them?
    Concerning your startup problems try to insert the Tiger install DVD and restart with the c-key held down. Once the installer has started, select your language and then select disk utility from the MENU. Single-click your hard disk in the left sidebar and repair the disk and permissions. Once they check out without errors quit disk utility aand restart.

  • How can i re-link .mpkg and .pkg files to hidden Installer?

    I am near the end of the process of setting up my new Mac Pro (early 2009) eight core. Quite the wonderful difference from my "Mirror Drive Door" dual 1.25 GHz machine!
    The Mac Pro came with Mac OS X 10.6.2 installed. I updated this to 10.6.6 via Software Update along with a slew of other updates presented there. I downloaded and installed a bunch of software. Finally, I was ready to install iLife 11 from the "CPU Drop-in" DVD that was on top of the box when the computer was originally unpacked.
    Unfortunately, it wouldn't even begin the install. The "iLife.mpkg" file, when double-clicked, returned the error message "no application associated with this document". Hours of investigation reveals that NO .mpkg or .pkg file will open; doing a "get info" on the files reveals that those files have lost their link to the Installer app.
    AND since the only installer I can find is hidden in /usr/sbin, there is no way I can re-link .mpkg and .pkg files to it via "get info".
    I downloaded Pacifist and used it to open the "Mac OS X 10.6.6 Combo" package and re-installed the Combo updater. Much to my surprise, that didn't fix the linking issue.
    I've logged in as root, but still can't re-link the package files to the Installer as /usr/ is still hidden. Is there a way I can temporarily "un-hide" the /usr directory so that "get info; open with" can see it?
    I've started from the Mac OS X installer DVD and repaired permissions on the hard disk and "repaired" the hard disk. No luck there either.
    I did a clean install of Mac OS X 10.6.2 to a different hard drive and applied the combo updater and the packages worked as expected there. So some software I installed or by running a slew of updaters via Software Update broke the link between packages and the Installer.
    I'm sure that re-linking to packages to the hidden installer app can be done via Terminal and possible other ways, but I don't know how to do it.
    Short of doing a complete Mac OS X 10.6 re-installation and update and having to re-do several days of other software installations and data transfers, I'm hoping someone will offer some solutions or tips on how to solve my problem.
    How do I re-link .mpkg and .pkg files to the Installer?

    Thanks for the reply. I know I had previously checked for the missing installer in /System/Library/CoreServices/ and I rechecked and it's still not there. But your tip spurred me to check the test 10.6.6 installation on the other hard disk and yes! It's there!
    A quick copy from the second hard disk to my current hard disk and doing the "get info" trick and everything now works wonderfully. Only one day lost to trying to figure this out. Now that the problem is fixed, quite the relief.

  • My Mac won't install mpkg and pkg files.

    My Mac won't install mpkg and pkg files.  Whenever I double-click an pkg or mpkg file, I get the dialog box to "choose an application" to open it.   After some searching, I discovered I do not have the installer.app.  I tried to Repair Disk from my Snow Leopard DVD but every time it boots from the DVD, my computer crashes.  Any suggestions?

    You have the installer app.  It is located in /System/Library/CoreServices. 
    Use the finder's Go menu, Go to Folder... and type /System/Library/CoreServices to open the CoreServices folder.   You should see it in there. If you do not see it there then that would beg the question what else might be missing and perphas you need to do an update (re)install (or restore form a hopefully good backup).
    To try to reassoicatate .[m]pkl's with the Installer, take one of your .[m]pkg's and do a finder Get Info on it and set the Open with... to the Installer app.  If the Installer app is not shown use Other... at the bottom of the list to navigate to the CoreServices folder and select Installer.  Then click the Change All... button.
    I am not sure why your [.m]pkgs would have lost their Launch Services association with Installer in the first place (unless it really is missing).

  • Problem with JFrame and busy/wait Cursor

    Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
    for the duration of some operation (usually just a few seconds).
    I can get it to work in some situations, but not others.
    Timing does seem to be an issue.
    There are thousands of posts on the BugParade, but
    in general Sun indicates this is not a bug. I just need
    a work-around.
    I've written a test program below to demonstrate the problem.
    I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
    I have not tested on Windows yet.
    When you run the following code, three JFrames will be opened,
    each with the same 5 buttons. The first "F1" listens to its own
    buttons, and works fine. The other two (F2 and F3) listen
    to each other's buttons.
    The "BUSY" button simply sets the cursor on its listener
    to the busy cursor. The "DONE" button sets it to the
    default cursor. These work fine.
    The "SLEEP" button sets the cursor, sleeps for 3 seconds,
    and sets it back. This does not work.
    The "INVOKE LATER" button does the same thing,
    except is uses invokeLater to sleep and set the
    cursor back. This also does not work.
    The "DELAY" button sleeps for 3 seconds (giving you
    time to move the mouse into the other (listerner's)
    window, and then it behaves just like the "SLEEP"
    button. This works.
    Any ideas would be appreciated, thanks.
    -J
    import java.awt.BorderLayout;
    import java.awt.Cursor;
    import java.awt.event.ActionEvent;
    import java.awt.event.ActionListener;
    import javax.swing.JButton;
    import javax.swing.JFrame;
    import javax.swing.JPanel;
    import javax.swing.SwingUtilities;
    public class BusyFrameTest implements ActionListener
    private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
    private static Cursor done = Cursor.getDefaultCursor();
    JFrame frame;
    JButton[] buttons;
    public BusyFrameTest (String title)
    frame = new JFrame (title);
    buttons = new JButton[5];
    buttons[0] = new JButton ("BUSY");
    buttons[1] = new JButton ("DONE");
    buttons[2] = new JButton ("SLEEP");
    buttons[3] = new JButton ("INVOKE LATER");
    buttons[4] = new JButton ("DELAY");
    JPanel buttonPanel = new JPanel();
    for (int i = 0; i < buttons.length; i++)
    buttonPanel.add (buttons);
    frame.getContentPane().add (buttonPanel);
    frame.pack();
    frame.setVisible (true);
    public void addListeners (ActionListener listener)
    for (int i = 0; i < buttons.length; i++)
    buttons[i].addActionListener (listener);
    public void actionPerformed (ActionEvent e)
    System.out.print (frame.getTitle() + ": " + e.getActionCommand());
    if (e.getActionCommand().equals ("BUSY"))
    frame.setCursor (busy);
    else if (e.getActionCommand().equals ("DONE"))
    frame.setCursor (done);
    else if (e.getActionCommand().equals ("SLEEP"))
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    else if (e.getActionCommand().equals ("INVOKE LATER"))
    frame.setCursor (busy);
    SwingUtilities.invokeLater (thread);
    else if (e.getActionCommand().equals ("DELAY"))
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (busy);
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.print (" finished");
    System.out.println();
    Runnable thread = new Runnable()
    public void run()
    try { Thread.sleep (3000); } catch (Exception ex) { }
    frame.setCursor (done);
    System.out.println (" finished");
    public static void main (String[] args)
    BusyFrameTest f1 = new BusyFrameTest ("F1");
    f1.addListeners (f1);
    BusyFrameTest f2 = new BusyFrameTest ("F2");
    BusyFrameTest f3 = new BusyFrameTest ("F3");
    f2.addListeners (f3); // 2 listens to 3
    f3.addListeners (f2); // 3 listens to 2

    I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
    I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

  • Problem with installing and running some applications or drivers

    When installing and installing some items, towards the end of the installation I get this message:
    /System/Library/Extensions/comcy_driver_USBDevice.kext
    *was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
    The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

    Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
    +was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
    Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

  • Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

    Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
    My Macbook pro is just 2 months old.
    What should I do? Is there a way to delete my Mac Address Book without having the problem above?
    Many thanks
    Regis

    zlatan24 wrote:
    For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
    If it is a windows problem it's not going to run on the OP's MacBook Pro

  • Problems with Safari and Firefox (HTTP?)

    Problems with Safari and Firefox (HTTP?)
    On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
    On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
    On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
    What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
    defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
    and
    defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
    but that did not help,
    Nanne

    I'm still wondering why it happens now at this moment in time...
    PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
    It may work when re-enabled

  • Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

    Haven't been able to use pages for a while.  Keep getting following message.  Have tried reinstalling iWork, but no luck.  Same problems with Keynote and Numbers/

    Have you moved Pages from its installed location? Or just dragged a copy to your current system?
    It can't find some of its resources apparently.
    Peter

  • Problem with DMGs and error: "No Mountable File Systems"

    Problem with DMGs and error: "No Mountable File Systems"
    The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
    This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
    I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
    Recent programs includes:
    1) upgrading from Parallels 5.5 to 6.0 on both machines.
    2) using an HP secure II usb drive and setting up a secure disk.
    3) installing new itunes 10
    4) new update to Flip For Mac.
    The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
    Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
    In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
    Message was edited by: remaia

    Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

  • Problem with Send and Receive Emal In SAP System

    Hi gurus!
    I have a following quote:
    Dear !
    I have a problem with send and receive email in SAP system following :
    I want to test send and receive email in local network at my company. I
    had two server
    Server 1 : I setup Exchange Mail Server 2007 with domain controller is
    fes.com
    Server 2 : I setup SAP ERP ECC 6.0
    On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
    and then
    On Server 2: I had configured send and receive email on SAP system
    through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
    e-mail, fax, paging or SMS using SMTP"
    for example :
    I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
    and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
    Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
    For example:
    Login system SAP with Basis01 account (with  u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
    and then
    Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
    To receive email from Basis01 (with u1Afes.com )
    Please help me now
    Thanks
    I replace "@" with "A" because of banning email of this forum.
    This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
    By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
    Regards
    An NLP
    Edited by: An NLP on Apr 6, 2010 7:03 PM

    Hi,
    This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
    So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
    (Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
    (A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
    (A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
    I would definitely NOT recommend this method but the decision is up to you.
    P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
    Hope this helps
    Michael

  • Problem with Speaker and Headset in Windows Vista

    Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
    Regards,Edwin

    When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
    http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

  • Problem with trigger and entity in JHeadsart, JBO-25019

    Hi to all,
    I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
    I have a problem with trigger and entity in JHeadsart
    I have 3 entity and 3 views
    DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
    TelUoView based on TelUo entity based on TEL_UO database table.
    NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
    I am using JHS to create :
    A JHS table-form based on DsitTelephoneView
    A JHS table based on TelUoView
    A JHS table based on NewAnnuaireView
    LIB_POSTE is a :
    DSIT_TELEPHONE column
    TEL_UO column
    NEW_ANNUAIRE column
    NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
    Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
    Lib_poste is upadated in JHS table based on TelUoView
    I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
    CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
    AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
    FOR EACH ROW
    BEGIN
    UPDATE DSIT_TELEPHONE T
    SET t.lib_poste = :new.lib_poste
    WHERE t.id_tel = :new.id_tel;
    END;
    When I change the lib_poste with the application :
    - the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
    - but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
    - in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
    oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
    25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
    It is as if it had lost the bond with the row in the entity.
    Could you help me please ?
    Regards
    Laurent

    The following example should help.
    SQL> create sequence workorders_seq
      2  start with 1
      3  increment by 1
      4  nocycle
      5  nocache;
    Sequence created.
    SQL> create table workorders(workorder_id number,
      2  description varchar2(30),
      3   created_date date default sysdate);
    Table created.
    SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
      2  BEFORE INSERT ON workorders
      3  FOR EACH ROW
      4  BEGIN
      5  SELECT workorders_seq.nextval
      6    INTO :new.workorder_id
      7    FROM dual;
      8  END;
      9  /
    Trigger created.
    SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
    Session altered.
    SQL> insert into workorders(description) values('test1');
    1 row created.
    SQL> insert into workorders(description) values('test2');
    1 row created.
    SQL> select * from workorders;
    WORKORDER_ID DESCRIPTION                    CREATED_DATE
               1 test1                          30-NOV-2004 15:30:34
               2 test2                          30-NOV-2004 15:30:42
    2 rows selected.

  • Problem with ADS and LDAP

    Problem with ADS and LDAP
    I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
    After connection via LDAP I cann't get any object ( users or goups etc. ).
    I try connect to ADS by java ( JNDI ).
    When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
    the same problem - no objects.
    Can anybody help me?
    Grzegorz Pszona
    my e-mail: [email protected]

    Thanks a lot.
    Softerra's browser is really good.
    Thanks
    Rashmi
    "Anant Kadiyala" <[email protected]> wrote:
    >
    I used Softerra's LDAP browser. The browser is free. There is also a
    java baded
    LDAP browser from Univ of Michigan. I found the Softerra browser to be
    more easier
    to use.
    -anant
    "rashmi" <[email protected]> wrote:
    Hi,
    Can you please let me know which exact ADS tool that you used to examine
    the
    DN. I have Active Directory Users and Computers, Sites and Servicesand
    Domain
    and Trusts installed on my machine but I am not able to figure out how
    to get
    the DN?
    Thanks
    Rashmi
    for Stephen Davies <[email protected]> wrote:
    Grzegorz,
    I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
    a
    fair bit of messing around to get it going. MS does have a few oddities,
    for example the Administrators DN might look something like this:
    cn=Administrator,cn=Users,dc=eglobal,dc=net
    One tool that I found invaluable came with the additional support tools
    for Windows 2000. The 'Active Directory Administration Tool' made it
    easy to list the directory contents and examine the DNs.
    Regards,
    Steve
    Stephen Davies
    Principal Consultant
    eGlobal Services Pty. Ltd.
    Sydney, Australia
    Ph. +61 2 9283 1033
    http://www.eglobal.net/

Maybe you are looking for

  • Adding two array lists together and a text file to an array list

    I'm having problems coding these two methods... Could someone explain how to do this? I can't find information on it anywhere... :( "MagazineList" is the class I'm coding in right now, and I already declared "list" as an array list of another class c

  • Adobe Premiere Pro CC 2014.2 (8.2) freezes up constantly on Mac OS X Yosemite

    After the latest update (no idea which one but the latest update) Premiere Pro cc just keeps freezing up constantly. There's no indication what brings it up but after different periods of time I just get the apple wheel and the entire program freezes

  • DBMS_ALERT

    Hi, In this forum i got suggestion to monitor a table ,i can use dbms_alert,the main of purpose of using this was to seperate the data load process from processing logic. So how i am planning to do things ,that whenever any record is inserted in tabl

  • Color correction in batch resizing.

         Anyone know good method for batch resizing that doesn't mess up color correction? I have a huge textile swatch library that I would like to batch to a resize, but when I batch resize the fabric textures compress or expand creating a tonal shift.

  • File preparation Casebound smyth sewn book

    Ello, I've prepared a 288 page book, that is full colour on each page, including background etc which will be casebound smyth sewn.  It's been designed as facing pages with only bleed on the outside edges. I asked the printer to provide PDF specs and