Problems with OEM after changing a database's hostname

I am having a whole pile of trouble after changing the hostname of an Oracle server 10g R1 -- it's actually 10.1.0.3.0 x86_64 on a Red Hat Enterprise Linux 4.0 server.
Specifically, I had a server called "foo" on which I installed 10g R1, with the SID and service ID both "BB8PROD". Then I realized that I had to rename the server to "bar", which I did (via /etc/sysconfig/network and /etc/hosts).
Then, I edited $ORACLE_HOME/network/admin/tnsnames.ora and $ORACLE_HOME/network/admin/listener.ora to reflect the new host names. I restarted the listener and the database, both of which came up fine.
However, when I start OEM via "emctl start dbconsole"), it still gives me the management URL of http://bar.domain.name:5500/em/. Obviously, that's the <i>old</i> hostname and not the new one. If I visit that URL (which I can keep alive via a CNAME in DNS), then I get the following message despite the instance running just fine in the background:
"Database: BB8PROD
The database status is currently unavailable. It is possible that the database is in mount or nomount state. Click 'Startup' to obtain the current status and open the database. If the database cannot be opened, click 'Perform Recovery' to perform an appropriate recovery operation."
It seems that OEM doesn't know where to find the instance since I changed the name in the listener and tnsnames files. I've tried using <tt>emca -r</tt> to OEM start on the correct hostname (i.e., bar) but even when I do that, it still can't connect to the database.
I found this URL about changing port numbers and the associated XML files that OEM calls, but that didn't solve my issue. I've looked online for help, and most of the articles I've found are about 10g R2, where OEM seems easier to reconfigure.
So, when changing the hostname of a database, what am I supposed to do to OEM to have it recognize the changes?
Thanks!
Chris

Hello Dieter,
I do not have a direct answer to your question, however , I am using an ECC6 system and I checked the two tables that you mentioned (SRGBTBREL & SRRELROLES). SRRELROLES has 3.8 million entries and SRGBTBREL has 2700 entries.
I would talk to your authorizations people to see if there is a generation or maintenance step that needs to be performed.
Not a lot of help I know. Good luck
Greg Kern

Similar Messages

Problem with ApEx after upgrade of database to 10.2.0.2

I could have posted this in the general Database forum since I am not sure whether the problem is directly related to the HTMLDB installation, perhaps it's only the place where the symptoms are shown, but here is it.
One of the customers I am currently developing HTMLDB applications for, recently updated their Oracle database to version 10.2.0.2. The HTMLDB installation is 2.0 (not sure which version exactly, I can't check it at the moment as I'm at another customer right now). Everything seems to work fine (just like it did before the upgrade), but since about two weeks, the HTMLDB application that is already in production (and used quite a lot) suddenly started spawning 404 errors.
The problem is that this behaviour can not always be reproduced. The errors appeared on last Friday as well, after which the database was restarted, which stopped them. This week, it ran without any problems on Monday and on Tuesday, until around 4pm. Then, the search functionality of one page (very basic query) and switching back and forth using the tabs would give 404 errors.
The customer has been in touch with Oracle Support about this (Severity 1 TAR) but so far they have not been able to come up with anything that could lead to a solution. I will, in short, describe what information we DO have at the moment, and I hope that maybe one of you has experienced the same (or similar) problem, or could help me find where to look for a solution. At the moment, I am wondering whether it is the HTMLDB installation that became corrupted (and may require a reinstall) But, since it works fine at times, there may be something else that is causing these problems.
Here we go (sorry for the long introducton ;))
The problem:
Sudden 404 errors on specific pages, in a working application, but also in the HTMLDB environment itself. Yesterday I tried to import a new version of the application - it would keep giving the error, and also simple tasks such as adding a new Tab would give me the error. In the development environment, which runs on a different database (previous version), everything works fine.
If the errors show up, they will keep on coming, until the database is restarted. At one point (last week) they seemed to stop by themselves around lunch time, but that only occurred at one time, as far as I know.
The error:
The error message that is shown in the Apache log file is:
[Fri Mar 17 15:44:10 2006] [error] [client 10.100.60.2] [ecid: 1142606650:10.100.60.26:4432:4836:63,0] mod_plsql: /pls/vta/wwv_flow.accept HTTP-404 ORA-06550: line 22, column 3:\nPLS-00306: wrong number or types of arguments in call to 'ACCEPT'\nORA-06550: line 22, column 3:\nPL/SQL: Statement ignored\n
Additional notes:
So far it is unclear what is causing these errors, but the customer has been in contact with Allround Automations (of PL/SQL Developer) who experienced something similar (a known bug afaik, but I have no documentation) with the reuse of a parsed representation of a cursor, which could cause access violations. This should however have been fixed in the patchset used to upgrade to 10.2.0.2.
Also, the amount of invalid database objects seems to fluctuate a lot. At times there may be 6, or as much as 23 or 24, then, when queried again a short time later, only 4. No idea whether this is related to anything else described here.
In short:
To me, it seems like something is influencing the database, causing HTMLDB and its applications to crash. It does not seem to come from HTMLDB itself, because it works fine the rest of the time, and without changing anything in the DAD, the application or the procedures used, the errors start showing up. But, I might be wrong ofcourse.
Any help would be greatly appreciated.

John,
Thanks for your help with this. So far everyone's pretty stumped.
It seems to be a problem that grows in the database, like something is leaking. We've been able to track it down to seeing that it starts happening on one particular call on a page we use for lookups, though if it is left alone it seems to grow until it encompasses anything on the HTMLDB server. We've got a SR open with Oracle, just waiting on some movement.
The keepalives may be unrelated, but it's worth a look while we're waiting for a break. Thanks for the suggestion.
I am still hoping that either Oracle can find the earlier SR and use it as a starting point, or someone involved from earlier checks back in.
Thanks again for your help, I'll let you know what happens.
Thanks,
Justin

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

Problem with Java after Software Update to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

Problems with Mail after upgrading to 10.9.1

I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
Problems I have encountered so far are:
- I don't receive some e-mails on my Gmail account.
- I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
Has anyone encountered the same problems and found a solution?
Thanks in advance!

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

Not sure how this is an ipod touch question.
Perhaps you should post in the itunes forum.

I have problems with activation, after delete mi Iphone from Icloud.

I have problems with activation, after delete mi Iphone from Icloud.

Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario

I am having problem with iMessage after updating my 5s to iOS 8.0.2

I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

Hello Huyen,
Thank you for using Apple Support Communities.
You can use the following article to troubleshoot Messages:
iOS: Troubleshooting Messages
Regards,
Jeff D.

HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

Hi were you able to resolve yours?
I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
Perform a hard reboot
Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

Problem with OEM backing up on windows system.

Hi to all,
I have a problem with backing up with a specific user.
I am currently running various "test" db's and am planning to back them up.
The Setup:
Host OS is windows 2003 server s2
Grid control 10.2.0.1
Database 10.2.0.2
Target Db is running on a windows 2003 server
The Situation:
From grid control I locate the db in question and go to the maintenance page and the backup settings. First of all I want to test the backup using the tab. Before this of course I enter the Host OS credentials into the system, let’s say "jamie", and add the appropriate password. By this point I have made sure that the user "jamie" is in the local security policy setting "log on as batch job" and that is in the group ora_dba (This is on both the machine I am backing up from and the target db machine.). For security reasons I have limited the share folder location to the user "jamie", making sure that sharing and security has the appropriate privileges to access the share.
I run a test backup using the tab within backup settings and await the results. The results come back unsuccessful. Reading through the log I see that the path to backup share is denied.
So to further the test I change the privileges within the share to "everyone" and that is for both sharing and security, just to see whether or not it’s the path itself rather than restrictions to the user. It is then a success. I checked to see who actually owned the file that was used within the test. It belonged to the local system on the target db, not to the user that I had specified within "Host OS Credentials".
Can anyone explain to me why and what is the reason behind putting in Host OS Credentials when the agent that is committing the back up is using the local domain system user account. I am aware that the Agent is part of a service within windows and belongs to the local domain. Ergo, why have host credentials.
And can anyone help me out with getting round this predicament if I still want security within the systems. I can’t just leave access to the share under "everyone", that'd be a really big hole in the system?!
Any help at all will be gratefully received.
If you’ve got any questions to help me solve the problem, please fire away.

You may want to take a look at these metalink notes:
Ref.
Subject:      ERROR in RMAN to Write to Shared Drives on Windows NT/2000
     Doc ID:      Note:246107.1      Type:      PROBLEM
     Last Revision Date:      08-JUL-2004      Status:      PUBLISHED
Subject:      How to Configure RMAN to Write to Shared Drives on Windows NT/2000
     Doc ID:      Note:145843.1      Type:      BULLETIN
     Last Revision Date:      21-OCT-2005      Status:      PUBLISHED
~ Madrid
http://hrivera99.blogspot.com/

Problems with mail after every shutdown

I posted a few days ago when mail kept crashing following the security update (probably due to me not closing all applications before installing).
I managed to get mail working again by resetting the junk mail filter.
However, since then I have had problems with mail every time I restart my computer. Every morning, it mail crashes when I open it. I have fixed it a few times by quickly deleting select messages from my inbox before it crashes, but today I can't even do that. Resetting junk mail filter doesn't seem to work now. It's weird because once I get mail open I can close/open with no problem. I only have problems again after I have shutdown the computer.
I verified the start up disk and permissions - there were no problems there - and I also checked for corrupted fonts (I have been reading all the suggestions posted on this site to people having similar problems).
The console log reads:
Jun 1 09:40:34 su-pwbk crashdump[218]: Mail crashed
Jun 1 09:40:34 su-pwbk crashdump[218]: crash report written to: /Users/shancock/Library/Logs/CrashReporter/Mail.crash.log
And the crash report reads:
Date/Time: 2007-06-01 09:53:53.492 -0700
OS Version: 10.4.9 (Build 8P135)
Report Version: 4
Command: Mail
Path: /Applications/Mail.app/Contents/MacOS/Mail
Parent: WindowServer [61]
Version: 2.1 (752)
Build Version: 1
Project Name: MailViewer
Source Version: 7520000
PID: 221
Thread: 3
Exception: EXCBADINSTRUCTION (0x0002)
Code[0]: 0x00000002
Code[1]: 0x9a397784
Thread 0:
0 libSystem.B.dylib 0x9000b448 machmsgtrap + 8
1 libSystem.B.dylib 0x9000b39c mach_msg + 60
2 com.apple.CoreFoundation 0x907deba8 __CFRunLoopRun + 832
3 com.apple.CoreFoundation 0x907de4ac CFRunLoopRunSpecific + 268
4 com.apple.HIToolbox 0x9329bb20 RunCurrentEventLoopInMode + 264
5 com.apple.HIToolbox 0x9329b1b4 ReceiveNextEventCommon + 380
6 com.apple.HIToolbox 0x9329b020 BlockUntilNextEventMatchingListInMode + 96
7 com.apple.AppKit 0x93780ae4 _DPSNextEvent + 384
8 com.apple.AppKit 0x937807a8 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
9 com.apple.AppKit 0x9377ccec -[NSApplication run] + 472
10 com.apple.AppKit 0x9386d87c NSApplicationMain + 452
11 com.apple.mail 0x000871d8 0x1000 + 549336
12 com.apple.mail 0x00087080 0x1000 + 548992
Thread 1:
0 libSystem.B.dylib 0x900553a8 semaphoretimedwait_signaltrap + 8
1 libSystem.B.dylib 0x90055204 pthreadcondtimedwait + 676
2 com.apple.Foundation 0x92c625d4 FCONDITION_WAITTIMEOUT + 144
3 com.apple.Foundation 0x92c624f0 -[NSConditionLock lockWhenCondition:beforeDate:] + 128
4 com.apple.MessageFramework 0x9a2b9d90 -[InvocationQueue _drainQueue] + 176
5 com.apple.Foundation 0x92be31a0 forkThreadForFunction + 108
6 libSystem.B.dylib 0x9002be08 pthreadbody + 96
Thread 2:
0 libSystem.B.dylib 0x900553a8 semaphoretimedwait_signaltrap + 8
1 libSystem.B.dylib 0x90055204 pthreadcondtimedwait + 676
2 com.apple.Foundation 0x92c625d4 FCONDITION_WAITTIMEOUT + 144
3 com.apple.Foundation 0x92c624f0 -[NSConditionLock lockWhenCondition:beforeDate:] + 128
4 com.apple.MessageFramework 0x9a2b9d90 -[InvocationQueue _drainQueue] + 176
5 com.apple.Foundation 0x92be31a0 forkThreadForFunction + 108
6 libSystem.B.dylib 0x9002be08 pthreadbody + 96
Thread 3 Crashed:
0 com.apple.MessageFramework 0x9a397784 -[ABAddressBook(MailAdditions) _bestRecordMatchingFormattedAddress:inSubscribedContent:] + 0
1 com.apple.MessageFramework 0x9a2dc7f0 -[ABAddressBook(MailAdditions) bestRecordMatchingFormattedAddress:] + 44
2 com.apple.MessageFramework 0x9a2dc6c8 -[MailAddressManager bestRecordMatchingFormattedAddress:] + 184
3 com.apple.mail 0x00040ee0 0x1000 + 261856
4 com.apple.mail 0x00037014 0x1000 + 221204
5 libobjc.A.dylib 0x90a461f4 objc_msgSendv + 180
6 com.apple.Foundation 0x92bdec94 -[NSInvocation invoke] + 944
7 com.apple.MessageFramework 0x9a2b0800 -[MonitoredInvocation invoke] + 144
8 com.apple.MessageFramework 0x9a2b9e80 -[InvocationQueue _drainQueue] + 416
9 com.apple.Foundation 0x92be31a0 forkThreadForFunction + 108
10 libSystem.B.dylib 0x9002be08 pthreadbody + 96
Thread 4:
0 libSystem.B.dylib 0x900553a8 semaphoretimedwait_signaltrap + 8
1 libSystem.B.dylib 0x90071be8 pthreadcond_timedwait_relativenp + 556
2 ...apple.AddressBook.framework 0x94e35cac -[ABRemoteImageLoader workLoop] + 132
3 com.apple.Foundation 0x92be31a0 forkThreadForFunction + 108
4 libSystem.B.dylib 0x9002be08 pthreadbody + 96
Thread 3 crashed with PPC Thread State 64:
srr0: 0x000000009a397784 srr1: 0x000000000008f030 vrsave: 0x0000000000000000
cr: 0x24000248 xer: 0x0000000020000004 lr: 0x000000009a2dc7f0 ctr: 0x000000009a397784
r0: 0x000000009a2dc7f0 r1: 0x00000000f0202ef0 r2: 0x00000000a0001fac r3: 0x0000000004a00490
r4: 0x000000009a3ec540 r5: 0x0000000004a5cac0 r6: 0x0000000000000000 r7: 0x000000006e636f63
r8: 0x0000000000000000 r9: 0x0000000000000000 r10: 0x0000000090a3f628 r11: 0x0000000000000001
r12: 0x000000009a397784 r13: 0x0000000000000000 r14: 0x0000000000000000 r15: 0x0000000000000000
r16: 0x0000000000000000 r17: 0x0000000000000000 r18: 0x00000000001b0000 r19: 0x0000000004a229a0
r20: 0x0000000000000002 r21: 0x0000000000000000 r22: 0x0000000004a2f110 r23: 0x00000000001b0000
r24: 0x0000000000000000 r25: 0x0000000000000000 r26: 0x0000000000000000 r27: 0x0000000004a5cac0
r28: 0x0000000004a5cac0 r29: 0x0000000004a00490 r30: 0x00000000aa2b5048 r31: 0x000000009a2dc610
Model: PowerBook5,2, BootROM 4.7.1f1, 1 processors, PowerPC G4 (1.1), 1 GHz, 768 MB
Graphics: ATI Mobility Radeon 9600, ATY,RV350M10, AGP, 64 MB
Memory Module: SODIMM0/J25LOWER, 256 MB, DDR SDRAM, PC2700U-25330
Memory Module: SODIMM1/J25UPPER, 512 MB, DDR SDRAM, PC2700U-25330
Modem: LastDash, Euro, V.92, 4.0, APPLE VERSION 2.6.6
Bluetooth: Version 1.7.14f14, 2 service, 0 devices, 1 incoming serial ports
Network Service: Built-in Ethernet, Ethernet, en0
PCI Card: TXN,PCIXXXX-00, cardbus, PC Card
Parallel ATA Device: MATSHITACD-RW CW-8123
Parallel ATA Device: TOSHIBA MK6026GAX, 55.89 GB
USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
USB Device: Microsoft 3-Button Mouse with IntelliEye(TM), Microsoft, Up to 1.5 Mb/sec, 500 mA
Would greatly appreciate a more permanant fix to this problem!
Thanks, Su
PowerBook5,2 Mac OS X (10.4.9)

As I said in the other thread, in your case Mail was crashing because of a problem with Address Book, so it should be no surprise that resetting the junk filter didn’t really fix the problem. It would have been more appropriate to post back there instead of starting a new thread...
If Address Book itself works fine, the problem is probably the Previous Recipients list that Mail stores in the Address Book database. If you can do this without Mail crashing, in Mail open Window > Previous Recipients and remove all the entries from there.
If that doesn’t work, you’ll have to re-create the entire Address Book database:
1. If you have a .Mac account and .Mac synchronization of Address Book data is enabled either in Address Book > Preferences > General or in System Preferences > .Mac, disable it before proceeding.
2. You may also need to reset the entire sync history (iSync > Preferences > Reset Sync History) to avoid synchronization issues if you use .Mac or iSync to synchronize your Address Book with other computers or devices.
3. Open Address Book.
4. As an extra safety measure, do File > Back up Address Book and save the backup wherever you wish.
5. Go to Address Book > Preferences > vCard, set the vCard Format to 3.0 and check Export notes in vCards. Close the Preferences window when done.
6. Select the All group in the main Address Book window and do File > Export Group vCard (the command should read “Export Group vCard”, not just “Export vCard”).
7. Quit Address Book, Mail, and any other applications that might use Address Book for something. Or just quit all applications to be on the safe side.
8. In the Finder, go to ~/Library/Application Support/ and move the entire AddressBook folder out of there, e.g. to the Desktop (to be deleted after fixing the problem and making sure you don’t miss anything).
9. Check whether the problem is fixed now. If it is, you may be able to restore your contacts without the problem happening again by opening Address Book and doing File > Import > vCards to import the previously exported cards back into Address Book.
10. If the problem has been fixed and .Mac synchronization of Address Book data was enabled at the beginning, enable it again, go to System Preferences > .Mac > Advanced, click Reset Sync Data, and choose the appropriate options to reset the Address Book data stored on the .Mac server with the data locally stored on the computer, i.e. sync data must flow from the computer to the .Mac server.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder. That is, ~/Library is the Library folder within the user’s home folder, i.e. /Users/username/Library.

Problems with bookmarks after update to version 16

My bookmarks used to appear in the bookmark drop-down menu but now are only available in the bookmark sidebar. I have tried the reset to default option. I have tried deleting the places.sqlite file and the localstore.rdf file from the profile, but no change. Should I also try deleting the places.sqlite-shm and places.sqlite-wal files??
How can I get my bookmarks back to where they were?
Also, I am unable to export bookmarks to html -- goes through the motions, but no file is created.

Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
You can try to check and repair the places database with this extension:
*https://addons.mozilla.org/firefox/addon/places-maintenance/

Problems with PXI after motherboard replacement

Hello,
My PXI system consists
of PXI-1045, PXI-8360 and five NI
PXI intruments (5152, 4065, 6552, 2532, 5404). I was working with this
system without problems for a long time. However, the motherboard of my
PC had a specific problem with the ethernet connenction and I decided to
replace the motherboard with a new one (same model). After the
replacement (the pc finally was fully functional), I tried to power on
the PXI chassis, but I couldn't "see" any module in PXI chassism, using
the MAX. I must tell thatI didn't change the hard disk of the
pc, or anything else just the motherboard.After some experiments, I
finally fix the probrem with the following solution: First I unplugged
all the modules from PXI chassis. After that, I plugged one module and I
reboot the pc. After that I plugged the second one module and I reboot
the pc. And so on...
This was the only solution
that I found in order to indentify all the modules of the PXI chassis.
My question is why happend this
thing? Where are the PXI modules' adresses stored? Also, is the
procedure I used correct, or I had to do something else in order to make
the system work?

Hello,
Im glad that your system is up and running, ideally that behavior should not have occured. For future troubleshooting, also check Windows Device Manager to see if your devices show up if MAX does not detect them (Windows may have initially failed to detect the hardware). In a PXI system, the pxisys.ini file provides mappings from PCI logical addresses (PCI bus, device, and function numbers) to corresponding PXI slot numbers, allowing device driver software to identify the slot of a PXI module. There is a unique pxisys.ini file for every combination of PXI chassis and controller. See the link provided below for additional information regarding how to configure PXI systems in MAX.
1. Configuring Your PXI System in MAX 3.x and Above: http://zone.ni.com/devzone/cda/tut/p/id/11136
Best regards,
Ali M
Applications Engineer
National Instruments

Problems with mapping after bundling messages into one XML-file

Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo Pijlman

Hi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha.

Problems with OEM after changing a database's hostname

Similar Messages

Maybe you are looking for